summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-13iio: accel: kx022a fix irq gettingMatti Vaittinen
The fwnode_irq_get_byname() was returning 0 at device-tree mapping error. If this occurred, the KX022A driver did abort the probe but errorneously directly returned the return value from fwnode_irq_get_byname() from probe. In case of a device-tree mapping error this indicated success. The fwnode_irq_get_byname() has since been fixed to not return zero on error so the check for fwnode_irq_get_byname() can be relaxed to only treat negative values as errors. This will also do decent fix even when backported to branches where fwnode_irq_get_byname() can still return zero on error because KX022A probe should later fail at IRQ requesting and a prober error handling should follow. Relax the return value check for fwnode_irq_get_byname() to only treat negative values as errors. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/ Link: https://lore.kernel.org/r/202305110245.MFxC9bUj-lkp@intel.com/ Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 7c1d1677b322 ("iio: accel: Support Kionix/ROHM KX022A accelerometer") Link: https://lore.kernel.org/r/b45b4b638db109c6078d243252df3a7b0485f7d5.1683875389.git.mazziesaccount@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: bu27034: Ensure reset is writtenMatti Vaittinen
The reset bit must be always written to the hardware no matter what value is in a cache or register. Ensure this by using regmap_write_bits() instead of the regmap_update_bits(). Furthermore, the SWRESET bit may be self-clearing, so mark the SYSTEM_CONTROL register volatile to guarantee we do also read the right state - should we ever need to read it. Finally, writing the SWRESET bit will restore the default register values. This can cause register cache to be outdated if there are any register values cached. Rebuild register cache after SWRESET and use regmap_update_bits() when performing the reset. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: e52afbd61039 ("iio: light: ROHM BU27034 Ambient Light Sensor") Link: https://lore.kernel.org/r/ZFjWhbfuN5XcKty+@fedora Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: dac: build ad5758 driver when AD5758 is selectedLukas Bulwahn
Commit 28d1a7ac2a0d ("iio: dac: Add AD5758 support") adds the config AD5758 and the corresponding driver ad5758.c. In the Makefile, the ad5758 driver is however included when AD5755 is selected, not when AD5758 is selected. Probably, this was simply a mistake that happened by copy-and-paste and forgetting to adjust the actual line. Surprisingly, no one has ever noticed that this driver is actually only included when AD5755 is selected and that the config AD5758 has actually no effect on the build. Fixes: 28d1a7ac2a0d ("iio: dac: Add AD5758 support") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230508040208.12033-1-lukas.bulwahn@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: addac: ad74413: fix resistance input processingRasmus Villemoes
On success, ad74413r_get_single_adc_result() returns IIO_VAL_INT aka 1. So currently, the IIO_CHAN_INFO_PROCESSED case is effectively equivalent to the IIO_CHAN_INFO_RAW case, and we never call ad74413r_adc_to_resistance_result() to convert the adc measurement to ohms. Check ret for being negative rather than non-zero. Fixes: fea251b6a5dbd (iio: addac: add AD74413R driver) Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230503095817.452551-1-linux@rasmusvillemoes.dk Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: light: vcnl4035: fixed chip ID checkFrank Li
VCNL4035 register(0xE) ID_L and ID_M define as: ID_L: 0x80 ID_H: 7:6 (0:0) 5:4 (0:0) slave address = 0x60 (7-bit) (0:1) slave address = 0x51 (7-bit) (1:0) slave address = 0x40 (7-bit) (1:0) slave address = 0x41 (7-bit) 3:0 Version code default (0:0:0:0) So just check ID_L. Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230501143605.1615549-1-Frank.Li@nxp.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13dt-bindings: iio: imx8qxp-adc: add missing vref-supplyAlexander Stein
Although this property is used right now for IIO_CHAN_INFO_SCALE, this ADC has two internal reference voltages, which the driver currently doesn't make use of. Fixes: db73419d8c06 ("dt-bindings: iio: adc: Add binding documentation for NXP IMX8QXP ADC") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230424092312.61746-1-alexander.stein@ew.tq-group.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: stm32-adc: skip adc-channels setup if none is presentSean Nyekjaer
If only adc differential channels are defined driver will fail with stm32-adc: probe of 48003000.adc:adc@0 failed with error -22 Fix this by skipping the initialization if no channels are defined. This applies only to the legacy way of initializing adc channels. Fixes: d7705f35448a ("iio: adc: stm32-adc: convert to device properties") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com> Link: https://lore.kernel.org/r/20230503162029.3654093-2-sean@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: stm32-adc: skip adc-diff-channels setup if none is presentSean Nyekjaer
If no adc differential channels are defined driver will fail with EINVAL: stm32-adc: probe of 48003000.adc:adc@0 failed with error -22 Fix this by skipping the initialization if no channels are defined. This applies only to the legacy way of initializing adc channels. Fixes: d7705f35448a ("iio: adc: stm32-adc: convert to device properties") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20230503162029.3654093-1-sean@geanix.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: ad7192: Change "shorted" channels to differentialPaul Cercueil
The AD7192 provides a specific channel configuration where both negative and positive inputs are connected to AIN2. This was represented in the ad7192 driver as a IIO channel with .channel = 2 and .extended_name set to "shorted". The problem with this approach, is that the driver provided two IIO channels with the identifier .channel = 2; one "shorted" and the other not. This goes against the IIO ABI, as a channel identifier should be unique. Address this issue by changing "shorted" channels to being differential instead, with channel 2 vs. itself, as we're actually measuring AIN2 vs. itself. Note that the fix tag is for the commit that moved the driver out of staging. The bug existed before that, but backporting would become very complex further down and unlikely to happen. Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Co-developed-by: Alisa Roman <alisa.roman@analog.com> Signed-off-by: Alisa Roman <alisa.roman@analog.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230330102100.17590-1-paul@crapouillou.net Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: accel: st_accel: Fix invalid mount_matrix on devices without ACPI _ONT ↵Hans de Goede
method When apply_acpi_orientation() fails, st_accel_common_probe() will fall back to iio_read_mount_matrix(), which checks for a mount-matrix device property and if that is not set falls back to the identity matrix. But when a sensor has no ACPI companion fwnode, or when the ACPI fwnode does not have a "_ONT" method apply_acpi_orientation() was returning 0, causing iio_read_mount_matrix() to never get called resulting in an invalid mount_matrix: [root@fedora ~]# cat /sys/bus/iio/devices/iio\:device0/mount_matrix (null), (null), (null); (null), (null), (null); (null), (null), (null) Fix this by making apply_acpi_orientation() always return an error when it did not set the mount_matrix. Fixes: 3d8ad94bb175 ("iio: accel: st_sensors: Support generic mounting matrix") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Marius Hoch <mail@mariushoch.de> Link: https://lore.kernel.org/r/20230416212409.310936-1-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: gts-helpers: fix integration time unitsMatti Vaittinen
The IIO ABI mandates expressing integration times in seconds. The GTS helper errorneously uses micro seconds in integration_times_available. Fix this by converting the lists to IIO_VAL_INT_PLUS_MICRO. Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/eeacd192c259e885850b5a2dd8b776bccfc44fa8.1681722914.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: bu27034: Fix integration timeMatti Vaittinen
The bu27034 uses micro seconds for integration time configuration. This is incorrect as the ABI mandates use of seconds. Change BU27034 driver to use seconds for integration time. Fixes: e52afbd61039 ("iio: light: ROHM BU27034 Ambient Light Sensor") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/a05647669af22ba919c7c87dccb43975e3235a87.1681722914.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: fix doc for iio_gts_find_sel_by_int_timeMatti Vaittinen
The kerneldoc for iio_gts_find_sel_by_int_time() has an error. Documentation states that function is searching a selector for a HW-gain while it is searching a selector for an integration time. Fix the documentation by saying the function is looking for a selector for an integration time. Fixes: 38416c28e168 ("iio: light: Add gain-time-scale helpers") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ZEIjI4YUzqPZk/9X@fedora Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: palmas: fix off by one bugsDan Carpenter
Valid values for "adc_chan" are zero to (PALMAS_ADC_CH_MAX - 1). Smatch detects some buffer overflows caused by this: drivers/iio/adc/palmas_gpadc.c:721 palmas_gpadc_read_event_value() error: buffer overflow 'adc->thresholds' 16 <= 16 drivers/iio/adc/palmas_gpadc.c:758 palmas_gpadc_write_event_value() error: buffer overflow 'adc->thresholds' 16 <= 16 The effect of this bug in other functions is more complicated but obviously we should fix all of them. Fixes: a99544c6c883 ("iio: adc: palmas: add support for iio threshold events") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/14fee94a-7db7-4371-b7d6-e94d86b9561e@kili.mountain Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: mxs-lradc: fix the order of two cleanup operationsJiakai Luo
Smatch reports: drivers/iio/adc/mxs-lradc-adc.c:766 mxs_lradc_adc_probe() warn: missing unwind goto? the order of three init operation: 1.mxs_lradc_adc_trigger_init 2.iio_triggered_buffer_setup 3.mxs_lradc_adc_hw_init thus, the order of three cleanup operation should be: 1.mxs_lradc_adc_hw_stop 2.iio_triggered_buffer_cleanup 3.mxs_lradc_adc_trigger_remove we exchange the order of two cleanup operations, introducing the following differences: 1.if mxs_lradc_adc_trigger_init fails, returns directly; 2.if trigger_init succeeds but iio_triggered_buffer_setup fails, goto err_trig and remove the trigger. In addition, we also reorder the unwind that goes on in the remove() callback to match the new ordering. Fixes: 6dd112b9f85e ("iio: adc: mxs-lradc: Add support for ADC driver") Signed-off-by: Jiakai Luo <jkluo@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230422133407.72908-1-jkluo@hust.edu.cn Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: ad4130: Make sure clock provider gets removedLars-Peter Clausen
The ad4130 driver registers a clock provider, but never removes it. This leaves a stale clock provider behind that references freed clocks when the device is unbound. Register a managed action to remove the clock provider when the device is removed. Fixes: 62094060cf3a ("iio: adc: ad4130: add AD4130 driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230414150702.518441-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: tmag5273: Fix runtime PM leak on measurement errorLars-Peter Clausen
The tmag5273 gets a runtime PM reference before reading a measurement and releases it when done. But if the measurement fails the tmag5273_read_raw() function exits before releasing the reference. Make sure that this error path also releases the runtime PM reference. Fixes: 866a1389174b ("iio: magnetometer: add ti tmag5273 driver") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Gerald Loacker <gerald.loacker@wolfvision.net> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230414013752.498767-1-lars@metafoo.de Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: mt6370: Fix ibus and ibat scaling value of some specific vendor ID ↵ChiaEn Wu
chips The scale value of ibus and ibat on the datasheet is incorrect due to the customer report after the experimentation with some specific vendor ID chips. Fixes: c1404d1b659f ("iio: adc: mt6370: Add MediaTek MT6370 support") Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com> Link: https://lore.kernel.org/r/1681122862-1994-1-git-send-email-chiaen_wu@richtek.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13iio: adc: imx93: fix a signedness bug in imx93_adc_read_raw()Dan Carpenter
The problem is these lines: ret = vref_uv = regulator_get_voltage(adc->vref); if (ret < 0) The "ret" variable is type long and "vref_uv" is u32 so that means the condition can never be true on a 64bit system. A negative error code from regulator_get_voltage() would be cast to a high positive u32 value and then remain a high positive value when cast to a long. The "ret" variable only ever stores ints so it should be declared as an int. We can delete the "vref_uv" variable and use "ret" directly. Fixes: 7d02296ac8b8 ("iio: adc: add imx93 adc support") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/Y+utEvjfjQRQo2QB@kili Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-05-13Merge branch 'hns3-fixes'David S. Miller
Hao Lan says: ==================== net: hns3: fix some bug for hns3 There are some bugfixes for the HNS3 ethernet driver. patch#1 fix miss checking for rx packet. patch#2 fixes VF promisc mode not update when mac table full bug, and patch#3 fixes a nterrupts not initialization in VF FLR bug. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix reset timeout when enable full VFJijie Shao
The timeout of the cmdq reset command has been increased to resolve the reset timeout issue in the full VF scenario. The timeout of other cmdq commands remains unchanged. Fixes: 8d307f8e8cf1 ("net: hns3: create new set of unified hclge_comm_cmd_send APIs") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix reset delay time to avoid configuration timeoutJie Wang
Currently the hns3 vf function reset delays 5000ms before vf rebuild process. In product applications, this delay is too long for application configurations and causes configuration timeout. According to the tests, 500ms delay is enough for reset process except PF FLR. So this patch modifies delay to 500ms in these scenarios. Fixes: 6988eb2a9b77 ("net: hns3: Add support to reset the enet/ring mgmt layer") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix sending pfc frames after reset issueJijie Shao
To prevent the system from abnormally sending PFC frames after an abnormal reset. The hns3 driver notifies the firmware to disable pfc before reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: hns3: fix output information incomplete for dumping tx queue info with ↵Jie Wang
debugfs In function hns3_dump_tx_queue_info, The print buffer is not enough when the tx BD number is configured to 32760. As a result several BD information wouldn't be displayed. So fix it by increasing the tx queue print buffer length. Fixes: 630a6738da82 ("net: hns3: adjust string spaces of some parameters of tx bd info in debugfs") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13Merge branch 'dsa-rzn1-a5psw-stp'David S. Miller
Alexis Lothoré says: ==================== net: dsa: rzn1-a5psw: fix STP states handling This small series fixes STP support and while adding a new function to enable/disable learning, use that to disable learning on standalone ports at switch setup as reported by Vladimir Oltean. This series was initially submitted on net-next by Clement Leger, but some career evolutions has made him hand me over those topics. Also, this new revision is submitted on net instead of net-next for V1 based on Vladimir Oltean's suggestion Changes since v2: - fix commit split by moving A5PSW_MGMT_CFG_ENABLE in relevant commit - fix reverse christmas tree ordering in a5psw_port_stp_state_set Changes since v1: - fix typos in commit messages and doc - re-split STP states handling commit - add Fixes: tag and new Signed-off-by - submit series as fix on net instead of net-next - split learning and blocking setting functions - remove unused define A5PSW_PORT_ENA_TX_SHIFT - add boolean for tx/rx enabled for clarity ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: disable learning for standalone portsClément Léger
When ports are in standalone mode, they should have learning disabled to avoid adding new entries in the MAC lookup table which might be used by other bridge ports to forward packets. While adding that, also make sure learning is enabled for CPU port. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: fix STP states handlingAlexis Lothoré
stp_set_state() should actually allow receiving BPDU while in LEARNING mode which is not the case. Additionally, the BLOCKEN bit does not actually forbid sending forwarded frames from that port. To fix this, add a5psw_port_tx_enable() function which allows to disable TX. However, while its name suggest that TX is totally disabled, it is not and can still allow to send BPDUs even if disabled. This can be done by using forced forwarding with the switch tagging mechanism but keeping "filtering" disabled (which is already the case in the rzn1-a5sw tag driver). With these fixes, STP support is now functional. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13net: dsa: rzn1-a5psw: enable management frames for CPU portClément Léger
Currently, management frame were discarded before reaching the CPU port due to a misconfiguration of the MGMT_CONFIG register. Enable them by setting the correct value in this register in order to correctly receive management frame and handle STP. Fixes: 888cdb892b61 ("net: dsa: rzn1-a5psw: add Renesas RZ/N1 advanced 5 port switch driver") Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13erspan: get the proto with the md version for collect_mdXin Long
In commit 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver"), it gets the proto with t->parms.erspan_ver, but t->parms.erspan_ver is not used by collect_md branch, and instead it should get the proto with md->version for collect_md. Thanks to Kevin for pointing this out. Fixes: 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver") Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Reported-by: Kevin Traynor <ktraynor@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: William Tu <u9012063@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-13Merge tag 'block-6.4-2023-05-13' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: "Just a few minor fixes for drivers, and a deletion of a file that is woefully out-of-date these days" * tag 'block-6.4-2023-05-13' of git://git.kernel.dk/linux: Documentation/block: drop the request.rst file ublk: fix command op code check block/rnbd: replace REQ_OP_FLUSH with REQ_OP_WRITE nbd: Fix debugfs_create_dir error checking
2023-05-13binder: add lockless binder_alloc_(set|get)_vma()Carlos Llamas
Bring back the original lockless design in binder_alloc to determine whether the buffer setup has been completed by the ->mmap() handler. However, this time use smp_load_acquire() and smp_store_release() to wrap all the ordering in a single macro call. Also, add comments to make it evident that binder uses alloc->vma to determine when the binder_alloc has been fully initialized. In these scenarios acquiring the mmap_lock is not required. Fixes: a43cfc87caaf ("android: binder: stop saving a pointer to the VMA") Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230502201220.1756319-3-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13Revert "android: binder: stop saving a pointer to the VMA"Carlos Llamas
This reverts commit a43cfc87caaf46710c8027a8c23b8a55f1078f19. This patch fixed an issue reported by syzkaller in [1]. However, this turned out to be only a band-aid in binder. The root cause, as bisected by syzkaller, was fixed by commit 5789151e48ac ("mm/mmap: undo ->mmap() when mas_preallocate() fails"). We no longer need the patch for binder. Reverting such patch allows us to have a lockless access to alloc->vma in specific cases where the mmap_lock is not required. This approach avoids the contention that caused a performance regression. [1] https://lore.kernel.org/all/0000000000004a0dbe05e1d749e0@google.com [cmllamas: resolved conflicts with rework of alloc->mm and removal of binder_alloc_set_vma() also fixed comment section] Fixes: a43cfc87caaf ("android: binder: stop saving a pointer to the VMA") Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230502201220.1756319-2-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13Revert "binder_alloc: add missing mmap_lock calls when using the VMA"Carlos Llamas
This reverts commit 44e602b4e52f70f04620bbbf4fe46ecb40170bde. This caused a performance regression particularly when pages are getting reclaimed. We don't need to acquire the mmap_lock to determine when the binder buffer has been fully initialized. A subsequent patch will bring back the lockless approach for this. [cmllamas: resolved trivial conflicts with renaming of alloc->mm] Fixes: 44e602b4e52f ("binder_alloc: add missing mmap_lock calls when using the VMA") Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20230502201220.1756319-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13binder: fix UAF caused by faulty buffer cleanupCarlos Llamas
In binder_transaction_buffer_release() the 'failed_at' offset indicates the number of objects to clean up. However, this function was changed by commit 44d8047f1d87 ("binder: use standard functions to allocate fds"), to release all the objects in the buffer when 'failed_at' is zero. This introduced an issue when a transaction buffer is released without any objects having been processed so far. In this case, 'failed_at' is indeed zero yet it is misinterpreted as releasing the entire buffer. This leads to use-after-free errors where nodes are incorrectly freed and subsequently accessed. Such is the case in the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_read+0xc40/0x1f30 Read of size 8 at addr ffff4faf037cfc58 by task poc/474 CPU: 6 PID: 474 Comm: poc Not tainted 6.3.0-12570-g7df047b3f0aa #5 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5b8 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 binder_thread_read+0xc40/0x1f30 binder_ioctl+0xd9c/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] Allocated by task 474: kasan_save_stack+0x3c/0x64 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x34 __kasan_kmalloc+0xb8/0xbc kmalloc_trace+0x48/0x5c binder_new_node+0x3c/0x3a4 binder_transaction+0x2b58/0x36f0 binder_thread_write+0x8e0/0x1b78 binder_ioctl+0x14a0/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] Freed by task 475: kasan_save_stack+0x3c/0x64 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x5c __kasan_slab_free+0xe8/0x154 __kmem_cache_free+0x128/0x2bc kfree+0x58/0x70 binder_dec_node_tmpref+0x178/0x1fc binder_transaction_buffer_release+0x430/0x628 binder_transaction+0x1954/0x36f0 binder_thread_write+0x8e0/0x1b78 binder_ioctl+0x14a0/0x1768 __arm64_sys_ioctl+0xd4/0x118 invoke_syscall+0x60/0x188 [...] ================================================================== In order to avoid these issues, let's always calculate the intended 'failed_at' offset beforehand. This is renamed and wrapped in a helper function to make it clear and convenient. Fixes: 32e9f56a96d8 ("binder: don't detect sender/target during buffer cleanup") Reported-by: Zi Fan Tan <zifantan@google.com> Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230505203020.4101154-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13Merge tag 'coresight-fixes-v6.4' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-linus Suzuki writes: coresight: Fixes for v6.4 Couple of fixes for coresight self-hosted tracing subsystem for v6.4. These include : - Fix signedness bug in tmc_etr_buf_insert_barrier_packet() - Fix memory leak with failing to release the path if trace-id allocation fails Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> * tag 'coresight-fixes-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: coresight: perf: Release Coresight path when alloc trace id failed coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()
2023-05-13vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAFGeorge Kennedy
After a call to console_unlock() in vcs_write() the vc_data struct can be freed by vc_port_destruct(). Because of that, the struct vc_data pointer must be reloaded in the while loop in vcs_write() after console_lock() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119 Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:380) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_write (drivers/tty/vt/vc_screen.c:664) vfs_write (fs/read_write.c:582 fs/read_write.c:564) ... <TASK> Allocated by task 1213: kmalloc_trace (mm/slab_common.c:1064) vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680 drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058) con_install (drivers/tty/vt/vt.c:3334) tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415 drivers/tty/tty_io.c:1392) tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:921) vfs_open (fs/open.c:1052) ... Freed by task 4116: kfree (mm/slab_common.c:1016) vc_port_destruct (drivers/tty/vt/vt.c:1044) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2778) ... The buggy address belongs to the object at ffff8880beab8800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00) The buggy address belongs to the physical page: page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbeab8 head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()") Cc: stable <stable@kernel.org> Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/1683889728-10411-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: qcom-geni: fix enabling deactivated interruptKrzysztof Kozlowski
The driver have a race, experienced only with PREEMPT_RT patchset: CPU0 | CPU1 ================================================================== qcom_geni_serial_probe | uart_add_one_port | | serdev_drv_probe | qca_serdev_probe | serdev_device_open | uart_open | uart_startup | qcom_geni_serial_startup | enable_irq | __irq_startup | WARN_ON() | IRQ not activated request_threaded_irq | irq_domain_activate_irq | The warning: 894000.serial: ttyHS1 at MMIO 0x894000 (irq = 144, base_baud = 0) is a MSM serial serial0: tty port ttyHS1 registered WARNING: CPU: 7 PID: 107 at kernel/irq/chip.c:241 __irq_startup+0x78/0xd8 ... qcom_geni_serial 894000.serial: serial engine reports 0 RX bytes in! Adding UART port triggers probe of child serial devices - serdev and eventually Qualcomm Bluetooth hci_qca driver. This opens UART port which enables the interrupt before it got activated in request_threaded_irq(). The issue originates in commit f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") and discussion on mailing list [1]. However the above commit does not explain why the uart_add_one_port() is moved above requesting interrupt. [1] https://lore.kernel.org/all/5d9f3dfa.1c69fb81.84c4b.30bf@mx.google.com/ Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup") Cc: <stable@vger.kernel.org> Cc: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230505152301.2181270-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: 8250_bcm7271: fix leak in `brcmuart_probe`Doug Berger
Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Reported-by: XuDong Liu <m202071377@hust.edu.cn> Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/ Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230427181916.2983697-3-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: 8250_bcm7271: balance clk_enable callsDoug Berger
The sw_baud clock must be disabled when the device driver is not connected to the device. This now occurs when probe fails and upon remove. Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver") Reported-by: XuDong Liu <m202071377@hust.edu.cn> Link: https://lore.kernel.org/lkml/20230424125100.4783-1-m202071377@hust.edu.cn/ Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230427181916.2983697-2-opendmb@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: arc_uart: fix of_iomap leak in `arc_serial_probe`Ke Zhang
Smatch reports: drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn: 'port->membase' from of_iomap() not released on lines: 631. In arc_serial_probe(), if uart_add_one_port() fails, port->membase is not released, which would cause a resource leak. To fix this, I replace of_iomap with devm_platform_ioremap_resource. Fixes: 8dbe1d5e09a7 ("serial/arc: inline the probe helper") Signed-off-by: Ke Zhang <m202171830@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Link: https://lore.kernel.org/r/20230428031636.44642-1-m202171830@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: 8250: Document termios parameter of serial8250_em485_config()Geert Uytterhoeven
With W=1: drivers/tty/serial/8250/8250_port.c:679: warning: Function parameter or member 'termios' not described in 'serial8250_em485_config' Fix this by documenting the parameter. Fixes: ae50bb2752836277 ("serial: take termios_rwsem for ->rs485_config() & pass termios as param") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/r/2bd1e62be1d5d33333002910372feecc6d52e78f.1682071013.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: Add support for Advantech PCI-1611U cardVitaliy Tomin
Add support for Advantech PCI-1611U card Advantech provides opensource drivers for this and many others card based on legacy copy of 8250_pci driver called adv950 https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ It is hard to maintain to run as out of tree module on newer kernels. Just adding PCI ID to kernel 8250_pci works perfect. Signed-off-by: Vitaliy Tomin <tomin@iszf.irk.ru> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13serial: 8250_exar: Add support for USR298x PCI ModemsAndrew Davis
Possibly the last PCI controller-based (i.e. not a soft/winmodem) dial-up modem one can still buy. Looks to have a stock XR17C154 PCI UART chip for communication, but for some reason when provisioning the PCI IDs they swapped the vendor and subvendor IDs. Otherwise this card would have worked out of the box. Searching online, some folks seem to not have this issue and others do, so it is possible only some batches of cards have this error. Create a new macro to handle the switched IDs and add support here. Signed-off-by: Andrew Davis <afd@ti.com> Cc: stable <stable@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230420160209.28221-1-afd@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb-storage: fix deadlock when a scsi command timeouts more than onceMaxime Bizon
With faulty usb-storage devices, read/write can timeout, in that case the SCSI layer will abort and re-issue the command. USB storage has no internal timeout, it relies on SCSI layer aborting commands via .eh_abort_handler() for non those responsive devices. After two consecutive timeouts of the same command, SCSI layer calls .eh_device_reset_handler(), without calling .eh_abort_handler() first. With usb-storage, this causes a deadlock: -> .eh_device_reset_handler -> device_reset -> mutex_lock(&(us->dev_mutex)); mutex already by usb_stor_control_thread(), which is waiting for command completion: -> usb_stor_control_thread (mutex taken here) -> usb_stor_invoke_transport -> usb_stor_Bulk_transport -> usb_stor_bulk_srb -> usb_stor_bulk_transfer_sglist -> usb_sg_wait Make sure we cancel any pending command in .eh_device_reset_handler() to avoid this. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-usb@vger.kernel.org Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/ Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb: dwc3: fix a test for error in dwc3_core_init()Dan Carpenter
This was refactored recently and the "ret = " was accidentally deleted so the errors aren't checked. Fixes: 1d72fab47656 ("USB: dwc3: refactor phy handling") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/d0c5a04f-deee-4ebe-9b0b-dc5492564519@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb: typec: tps6598x: Fix fault at module removalRoger Quadros
We need to cancel the delayed workqueue if it is being used else it will cause paging request fault during module removal. Fixes: 0d6a119cecd7 ("usb: typec: tps6598x: Add support for polling interrupts status") Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230421101720.34318-1-rogerq@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb: gadget: u_ether: Fix host MAC address caseKonrad Gräfe
The CDC-ECM specification [1] requires to send the host MAC address as an uppercase hexadecimal string in chapter "5.4 Ethernet Networking Functional Descriptor": The Unicode character is chosen from the set of values 30h through 39h and 41h through 46h (0-9 and A-F). However, snprintf(.., "%pm", ..) generates a lowercase MAC address string. While most host drivers are tolerant to this, UsbNcm.sys on Windows 10 is not. Instead it uses a different MAC address with all bytes set to zero including and after the first byte containing a lowercase letter. On Windows 11 Microsoft fixed it, but apparently they did not backport the fix. This change fixes the issue by upper-casing the MAC to comply with the specification. [1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by: Konrad Gräfe <k.graefe@gateware.de> Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13usb: typec: altmodes/displayport: fix pin_assignment_showBadhri Jagan Sridharan
This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13Revert "usb: gadget: udc: core: Invoke usb_gadget_connect only when started"Francesco Dolcini
This reverts commit 0db213ea8eed5534a5169e807f28103cbc9d23df. It introduces an issues with configuring the USB gadget hangs forever on multiple Qualcomm and NXP i.MX SoC at least. Cc: stable@vger.kernel.org Fixes: 0db213ea8eed ("usb: gadget: udc: core: Invoke usb_gadget_connect only when started") Reported-by: Stephan Gerhold <stephan@gerhold.net> Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230512131435.205464-3-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-05-13Revert "usb: gadget: udc: core: Prevent redundant calls to pullup"Francesco Dolcini
This reverts commit a3afbf5cc887fc3401f012fe629810998ed61859. This depends on commit 0db213ea8eed ("usb: gadget: udc: core: Invoke usb_gadget_connect only when started") that introduces a regression, revert it till the issue is fixed. Cc: stable@vger.kernel.org Reported-by: Stephan Gerhold <stephan@gerhold.net> Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/all/ZF4BvgsOyoKxdPFF@francesco-nb.int.toradex.com/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20230512131435.205464-2-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-20 03:35:39 +0000