| Age | Commit message (Collapse) | Author |
|---|
|
Create selftests for PCIe BW control through the PCIe cooling device sysfs
interface.
First, the BW control selftest finds the PCIe Port to test with. By
default, the PCIe Port with the highest Link Speed is selected but
another PCIe Port can be provided with -d parameter.
The actual test steps the cur_state of the cooling device one-by-one
from max_state to what the cur_state was initially. The speed change
is confirmed by observing the current_link_speed for the corresponding
PCIe Port.
Link: https://lore.kernel.org/r/20241018144755.7875-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a thermal cooling driver to provide path to access PCIe bandwidth
controller using the usual thermal interfaces.
A cooling device is instantiated for controllable PCIe Ports from the
bwctrl service driver.
If registering the cooling device fails, allow bwctrl's probe to succeed
regardless. As cdev in that case contains IS_ERR() pseudo "pointer", clean
that up inside the probe function so the remove side doesn't need to
suddenly make an odd looking IS_ERR() check.
The thermal side state 0 means no throttling, i.e., maximum supported PCIe
Link Speed.
Link: https://lore.kernel.org/r/20241018144755.7875-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: dropped data->cdev test per
https://lore.kernel.org/r/ZzRm1SJTwEMRsAr8@wunner.de]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # From the cooling device interface perspective
|
|
Currently, PCIe Link Speeds are adjusted by custom code rather than in a
common function provided in PCI core. The PCIe bandwidth controller
(bwctrl) introduces an in-kernel API, pcie_set_target_speed(), to set PCIe
Link Speed.
Convert Target Speed quirk to use the new API. The Target Speed quirk runs
very early when bwctrl is not yet probed for a Port and can also run later
when bwctrl is already setup for the Port, which requires the per port
mutex (set_speed_mutex) to be only taken if the bwctrl setup is already
complete.
The new API is also intended to be used in an upcoming commit that adds a
thermal cooling device to throttle PCIe bandwidth when thermal thresholds
are reached.
The PCIe bandwidth control procedure is as follows. The highest speed
supported by the Port and the PCIe device which is not higher than the
requested speed is selected and written into the Target Link Speed in the
Link Control 2 Register. Then bandwidth controller retrains the PCIe Link.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus to
keep track PCIe Link Speed changes. While Bandwidth Notifications should
also be generated when bandwidth controller alters the PCIe Link Speed, a
few platforms do not deliver LMBS interrupt after Link Training as
expected. Thus, after changing the Link Speed, bandwidth controller makes
additional read for the Link Status Register to ensure cur_bus_speed is
consistent with the new PCIe Link Speed.
Link: https://lore.kernel.org/r/20241018144755.7875-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash devm_mutex_init() error checking from
https://lore.kernel.org/r/20241030163139.2111689-1-andriy.shevchenko@linux.intel.com,
drop export of pcie_set_target_speed()]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This mostly reverts the commit b4c7d2076b4e ("PCI/LINK: Remove bandwidth
notification"). An upcoming commit extends this driver building PCIe
bandwidth controller on top of it.
PCIe bandwidth notifications were first added in the commit e8303bb7a75c
("PCI/LINK: Report degraded links via link bandwidth notification") but
later had to be removed. The significant changes compared with the old
bandwidth notification driver include:
1) Don't print the notifications into kernel log, just keep the Link
Speed cached in struct pci_bus updated. While somewhat unfortunate,
the log spam was the source of complaints that eventually lead to
the removal of the bandwidth notifications driver (see the links
below for further information).
2) Besides the Link Bandwidth Management Interrupt, also enable Link
Autonomous Bandwidth Interrupt to cover the other source of bandwidth
changes.
3) Handle Link Speed updates robustly. Refresh the cached Link Speed
when enabling Bandwidth Notification Interrupts, and solve the race
between Link Speed read and LBMS/LABS update in
pcie_bwnotif_irq_thread().
4) Use concurrency safe LNKCTL RMW operations.
5) The driver is now called PCIe bwctrl (bandwidth controller) instead
of just bandwidth notifications because of increased scope and
functionality within the driver.
6) Coexist with the Target Link Speed quirk in pcie_failed_link_retrain().
Provide LBMS counting API for it.
7) Tweaks to variable/functions names for consistency and length reasons.
Bandwidth Notifications enable the cur_bus_speed in the struct pci_bus to
keep track PCIe Link Speed changes.
[bhelgaas: This is based on previous work by Alexandru Gagniuc
<mr.nuke.me@gmail.com>; see e8303bb7a75c ("PCI/LINK: Report degraded links
via link bandwidth notification")]
Link: https://lore.kernel.org/r/20241018144755.7875-7-ilpo.jarvinen@linux.intel.com
Link: https://lore.kernel.org/all/20190429185611.121751-1-helgaas@kernel.org/
Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.com/
Link: https://lore.kernel.org/linux-pci/20200115221008.GA191037@google.com/
Suggested-by: Lukas Wunner <lukas@wunner.de> # Building bwctrl on top of bwnotif
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash fix to drop IRQF_ONESHOT and convert to hardirq handler:
https://lore.kernel.org/r/20241115165717.15233-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Target Speed quirk in pcie_failed_link_retrain() uses the presence of
LBMS bit as one of the triggering conditions, effectively monopolizing the
use of that bit. An upcoming change will introduce a PCIe bandwidth
controller which sets up an interrupt to track LBMS. As LBMS will be
cleared by the interrupt handler, the Target Speed quirk will no longer be
able to observe LBMS directly.
As a preparatory step for the change, extract the LBMS seen check from
pcie_failed_link_retrain() into a new function pcie_lmbs_seen().
Link: https://lore.kernel.org/r/20241018144755.7875-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
pcie_update_link_speed() is passed the Link Status register but not all
callers have that value at hand nor need the value.
Refactor pcie_update_link_speed() to include reading the Link Status
register and create __pcie_update_link_speed() which can be used by the
hotplug code that has the register value at hand beforehand (and needs the
value for other purposes).
Link: https://lore.kernel.org/r/20241018144755.7875-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The PCIe bandwidth controller added by a subsequent commit will require
selecting PCIe Link Speeds that are lower than the Maximum Link Speed.
The struct pci_bus only stores max_bus_speed. Even if PCIe r6.1 sec 8.2.1
currently disallows gaps in supported Link Speeds, the Implementation Note
in PCIe r6.1 sec 7.5.3.18, recommends determining supported Link Speeds
using the Supported Link Speeds Vector in the Link Capabilities 2 Register
(when available) to "avoid software being confused if a future
specification defines Links that do not require support for all slower
speeds."
Reuse code in pcie_get_speed_cap() to add pcie_get_supported_speeds() to
query the Supported Link Speeds Vector of a PCIe device. The value is taken
directly from the Supported Link Speeds Vector or synthesized from the Max
Link Speed in the Link Capabilities Register when the Link Capabilities 2
Register is not available.
The Supported Link Speeds Vector in the Link Capabilities Register 2
corresponds to the bus below on Root Ports and Downstream Ports, whereas it
corresponds to the bus above on Upstream Ports and Endpoints (PCIe r6.1 sec
7.5.3.18):
Supported Link Speeds Vector - This field indicates the supported Link
speed(s) of the associated Port.
Add supported_speeds into the struct pci_dev that caches the
Supported Link Speeds Vector.
supported_speeds contains a set of Link Speeds only in the case where PCIe
Link Speed can be determined. Root Complex Integrated Endpoints do not have
a well-defined Link Speed because they do not implement either of the Link
Capabilities Registers, which is allowed by PCIe r6.1 sec 7.5.3 (the same
limitation applies to determining cur_bus_speed and max_bus_speed that are
PCI_SPEED_UNKNOWN in such case). This is of no concern from PCIe bandwidth
controller point of view because such devices are not attached into a PCIe
Root Port that could be controlled.
The supported_speeds field keeps the extra reserved zero at the least
significant bit to match the Link Capabilities 2 Register layout.
An attempt was made to store supported_speeds field into the struct pci_bus
as an intersection of both ends of the Link, however, the subordinate
struct pci_bus is not available early enough. The Target Speed quirk (in
pcie_failed_link_retrain()) can run either during initial scan or later,
requiring it to use the API provided by the PCIe bandwidth controller to
set the Target Link Speed in order to co-exist with the bandwidth
controller. When the Target Speed quirk is calling the bandwidth controller
during initial scan, the struct pci_bus is not yet initialized. As such,
storing supported_speeds into the struct pci_bus is not viable.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/20241018144755.7875-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: move pcie_get_supported_speeds() decl to drivers/pci/pci.h]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The PCIe Bandwidth Controller performs RMW accesses the Link Control 2
Register which can occur concurrently to other sources of Link Control 2
Register writes. Therefore, add Link Control 2 Register among the PCI
Express Capability Registers that need RMW locking.
Link: https://lore.kernel.org/r/20241018144755.7875-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Extract the list of RMW protected PCIe Capability registers into a
bullet list to make them easier to pick up on a glance. An upcoming
change is going to add one more register among them so it will be much
cleaner to have them as bullets.
Link: https://lore.kernel.org/r/20241018144755.7875-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
|
|
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
|
|
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
|
|
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
for 'Pantherlake' and 'Diamond Rapids'"
* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add two Intel CPU model numbers
x86/tdx: Fix "in-kernel MMIO" check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"lockdep:
- Fix potential deadlock between lockdep and RCU (Zhiguo Niu)
- Use str_plural() to address Coccinelle warning (Thorsten Blum)
- Add debuggability enhancement (Luis Claudio R. Goncalves)
static keys & calls:
- Fix static_key_slow_dec() yet again (Peter Zijlstra)
- Handle module init failure correctly in static_call_del_module()
(Thomas Gleixner)
- Replace pointless WARN_ON() in static_call_module_notify() (Thomas
Gleixner)
<linux/cleanup.h>:
- Add usage and style documentation (Dan Williams)
rwsems:
- Move is_rwsem_reader_owned() and rwsem_owner() under
CONFIG_DEBUG_RWSEMS (Waiman Long)
atomic ops, x86:
- Redeclare x86_32 arch_atomic64_{add,sub}() as void (Uros Bizjak)
- Introduce the read64_nonatomic macro to x86_32 with cx8 (Uros
Bizjak)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
* tag 'locking-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Move is_rwsem_reader_owned() and rwsem_owner() under CONFIG_DEBUG_RWSEMS
jump_label: Fix static_key_slow_dec() yet again
static_call: Replace pointless WARN_ON() in static_call_module_notify()
static_call: Handle module init failure correctly in static_call_del_module()
locking/lockdep: Simplify character output in seq_line()
lockdep: fix deadlock issue between lockdep and rcu
lockdep: Use str_plural() to fix Coccinelle warning
cleanup: Add usage and style documentation
lockdep: suggest the fix for "lockdep bfs error:-1" on print_bfs_bug
locking/atomic/x86: Redeclare x86_32 arch_atomic64_{add,sub}() as void
locking/atomic/x86: Introduce the read64_nonatomic macro to x86_32 with cx8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"Extend string_choices.cocci to use more available helpers
Ten patches from Hongbo Li extending string_choices.cocci with the
complete set of functions offered by include/linux/string_choices.h.
One patch from myself reducing the number of redundant cases that are
checked by Coccinelle, giving a small performance improvement"
* tag 'cocci-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Reduce Coccinelle choices in string_choices.cocci
coccinelle: Remove unnecessary parentheses for only one possible change.
coccinelle: Add rules to find str_yes_no() replacements
coccinelle: Add rules to find str_on_off() replacements
coccinelle: Add rules to find str_write_read() replacements
coccinelle: Add rules to find str_read_write() replacements
coccinelle: Add rules to find str_enable{d}_disable{d}() replacements
coccinelle: Add rules to find str_lo{w}_hi{gh}() replacements
coccinelle: Add rules to find str_hi{gh}_lo{w}() replacements
coccinelle: Add rules to find str_false_true() replacements
coccinelle: Add rules to find str_true_false() replacements
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One urgent fix to vDSO as automated testing is failing due to this
bug"
* tag 'linux_kselftest-next-6.12-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: vDSO: align stack for O2-optimized memcpy
|
|
Merge all pending locking commits into a single branch.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_yes_no()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_on_off()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_write_read()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_read_write()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_enable{d}_
disable{d}() to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_lo{w}_hi{gh}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Pull x86 kvm updates from Paolo Bonzini:
"x86:
- KVM currently invalidates the entirety of the page tables, not just
those for the memslot being touched, when a memslot is moved or
deleted.
This does not traditionally have particularly noticeable overhead,
but Intel's TDX will require the guest to re-accept private pages
if they are dropped from the secure EPT, which is a non starter.
Actually, the only reason why this is not already being done is a
bug which was never fully investigated and caused VM instability
with assigned GeForce GPUs, so allow userspace to opt into the new
behavior.
- Advertise AVX10.1 to userspace (effectively prep work for the
"real" AVX10 functionality that is on the horizon)
- Rework common MSR handling code to suppress errors on userspace
accesses to unsupported-but-advertised MSRs
This will allow removing (almost?) all of KVM's exemptions for
userspace access to MSRs that shouldn't exist based on the vCPU
model (the actual cleanup is non-trivial future work)
- Rework KVM's handling of x2APIC ICR, again, because AMD (x2AVIC)
splits the 64-bit value into the legacy ICR and ICR2 storage,
whereas Intel (APICv) stores the entire 64-bit value at the ICR
offset
- Fix a bug where KVM would fail to exit to userspace if one was
triggered by a fastpath exit handler
- Add fastpath handling of HLT VM-Exit to expedite re-entering the
guest when there's already a pending wake event at the time of the
exit
- Fix a WARN caused by RSM entering a nested guest from SMM with
invalid guest state, by forcing the vCPU out of guest mode prior to
signalling SHUTDOWN (the SHUTDOWN hits the VM altogether, not the
nested guest)
- Overhaul the "unprotect and retry" logic to more precisely identify
cases where retrying is actually helpful, and to harden all retry
paths against putting the guest into an infinite retry loop
- Add support for yielding, e.g. to honor NEED_RESCHED, when zapping
rmaps in the shadow MMU
- Refactor pieces of the shadow MMU related to aging SPTEs in
prepartion for adding multi generation LRU support in KVM
- Don't stuff the RSB after VM-Exit when RETPOLINE=y and AutoIBRS is
enabled, i.e. when the CPU has already flushed the RSB
- Trace the per-CPU host save area as a VMCB pointer to improve
readability and cleanup the retrieval of the SEV-ES host save area
- Remove unnecessary accounting of temporary nested VMCB related
allocations
- Set FINAL/PAGE in the page fault error code for EPT violations if
and only if the GVA is valid. If the GVA is NOT valid, there is no
guest-side page table walk and so stuffing paging related metadata
is nonsensical
- Fix a bug where KVM would incorrectly synthesize a nested VM-Exit
instead of emulating posted interrupt delivery to L2
- Add a lockdep assertion to detect unsafe accesses of vmcs12
structures
- Harden eVMCS loading against an impossible NULL pointer deref
(really truly should be impossible)
- Minor SGX fix and a cleanup
- Misc cleanups
Generic:
- Register KVM's cpuhp and syscore callbacks when enabling
virtualization in hardware, as the sole purpose of said callbacks
is to disable and re-enable virtualization as needed
- Enable virtualization when KVM is loaded, not right before the
first VM is created
Together with the previous change, this simplifies a lot the logic
of the callbacks, because their very existence implies
virtualization is enabled
- Fix a bug that results in KVM prematurely exiting to userspace for
coalesced MMIO/PIO in many cases, clean up the related code, and
add a testcase
- Fix a bug in kvm_clear_guest() where it would trigger a buffer
overflow _if_ the gpa+len crosses a page boundary, which thankfully
is guaranteed to not happen in the current code base. Add WARNs in
more helpers that read/write guest memory to detect similar bugs
Selftests:
- Fix a goof that caused some Hyper-V tests to be skipped when run on
bare metal, i.e. NOT in a VM
- Add a regression test for KVM's handling of SHUTDOWN for an SEV-ES
guest
- Explicitly include one-off assets in .gitignore. Past Sean was
completely wrong about not being able to detect missing .gitignore
entries
- Verify userspace single-stepping works when KVM happens to handle a
VM-Exit in its fastpath
- Misc cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits)
Documentation: KVM: fix warning in "make htmldocs"
s390: Enable KVM_S390_UCONTROL config in debug_defconfig
selftests: kvm: s390: Add VM run test case
KVM: SVM: let alternatives handle the cases when RSB filling is required
KVM: VMX: Set PFERR_GUEST_{FINAL,PAGE}_MASK if and only if the GVA is valid
KVM: x86/mmu: Use KVM_PAGES_PER_HPAGE() instead of an open coded equivalent
KVM: x86/mmu: Add KVM_RMAP_MANY to replace open coded '1' and '1ul' literals
KVM: x86/mmu: Fold mmu_spte_age() into kvm_rmap_age_gfn_range()
KVM: x86/mmu: Morph kvm_handle_gfn_range() into an aging specific helper
KVM: x86/mmu: Honor NEED_RESCHED when zapping rmaps and blocking is allowed
KVM: x86/mmu: Add a helper to walk and zap rmaps for a memslot
KVM: x86/mmu: Plumb a @can_yield parameter into __walk_slot_rmaps()
KVM: x86/mmu: Move walk_slot_rmaps() up near for_each_slot_rmap_range()
KVM: x86/mmu: WARN on MMIO cache hit when emulating write-protected gfn
KVM: x86/mmu: Detect if unprotect will do anything based on invalid_list
KVM: x86/mmu: Subsume kvm_mmu_unprotect_page() into the and_retry() version
KVM: x86: Rename reexecute_instruction()=>kvm_unprotect_and_retry_on_failure()
KVM: x86: Update retry protection fields when forcing retry on emulation failure
KVM: x86: Apply retry protection to "unprotect on failure" path
KVM: x86: Check EMULTYPE_WRITE_PF_TO_SP before unprotecting gfn
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Clean up and improve vdso code: use SYM_* macros for function and
data annotations, add CFI annotations to fix GDB unwinding, optimize
the chacha20 implementation
- Add vfio-ap driver feature advertisement for use by libvirt and
mdevctl
* tag 's390-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Driver feature advertisement
s390/vdso: Use one large alternative instead of an alternative branch
s390/vdso: Use SYM_DATA_START_LOCAL()/SYM_DATA_END() for data objects
tools: Add additional SYM_*() stubs to linkage.h
s390/vdso: Use macros for annotation of asm functions
s390/vdso: Add CFI annotations to __arch_chacha20_blocks_nostack()
s390/vdso: Fix comment within __arch_chacha20_blocks_nostack()
s390/vdso: Get rid of permutation constants
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull module updates from Luis Chamberlain:
"There are a few fixes / cleanups from Vincent, Chunhui, and Petr, but
the most important part of this pull request is the Rust community
stepping up to help maintain both C / Rust code for future Rust module
support. We grow the set of modules maintainers by three now, and with
this hope to scale to help address what's needed to properly support
future Rust module support.
A lot of exciting stuff coming in future kernel releases.
This has been on linux-next for ~ 3 weeks now with no issues"
* tag 'modules-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Refine kmemleak scanned areas
module: abort module loading when sysfs setup suffer errors
MAINTAINERS: scale modules with more reviewers
module: Clean up the description of MODULE_SIG_<type>
module: Split modules_install compression and in-kernel decompression
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- crash fix in fbcon_putcs
- avoid a possible string memory overflow in sisfb
- minor code optimizations in omapfb and fbcon
* tag 'fbdev-for-6.12-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: sisfb: Fix strbuf array overflow
fbcon: break earlier in search_fb_in_map and search_for_mapped_con
fbdev: omapfb: Call of_node_put(ep) only once in omapdss_of_find_source_for_first_ep()
fbcon: Fix a NULL pointer dereference issue in fbcon_putcs
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes for the week to end the merge window, i915 and xe have a
few each, amdgpu makes up most of it with a bunch of SR-IOV related
fixes amongst others.
i915:
- Fix BMG support to UHBR13.5
- Two PSR fixes
- Fix colorimetry detection for DP
xe:
- Fix macro for checking minimum GuC version
- Fix CCS offset calculation for some BMG SKUs
- Fix locking on memory usage reporting via fdinfo and BO destroy
- Fix GPU page fault handler on a closed VM
- Fix overflow in oa batch buffer
amdgpu:
- MES 12 fix
- KFD fence sync fix
- SR-IOV fixes
- VCN 4.0.6 fix
- SDMA 7.x fix
- Bump driver version to note cleared VRAM support
- SWSMU fix
- CU occupancy logic fix
- SDMA queue fix"
* tag 'drm-next-2024-09-28' of https://gitlab.freedesktop.org/drm/kernel: (79 commits)
drm/amd/pm: update workload mask after the setting
drm/amdgpu: bump driver version for cleared VRAM
drm/amdgpu: fix vbios fetching for SR-IOV
drm/amdgpu: fix PTE copy corruption for sdma 7
drm/amdkfd: Add SDMA queue quantum support for GFX12
drm/amdgpu/vcn: enable AV1 on both instances
drm/amdkfd: Fix CU occupancy for GFX 9.4.3
drm/amdkfd: Update logic for CU occupancy calculations
drm/amdgpu: skip coredump after job timeout in SRIOV
drm/amdgpu: sync to KFD fences before clearing PTEs
drm/amdgpu/mes12: set enable_level_process_quantum_check
drm/i915/dp: Fix colorimetry detection
drm/amdgpu/mes12: reduce timeout
drm/amdgpu/mes11: reduce timeout
drm/amdgpu: use GEM references instead of TTMs v2
drm/amd/display: Allow backlight to go below `AMDGPU_DM_DEFAULT_MIN_BACKLIGHT`
drm/amd/display: Fix kdoc entry for 'tps' in 'dc_process_dmub_dpia_set_tps_notification'
drm/amdgpu: update golden regs for gfx12
drm/amdgpu: clean up vbios fetching code
drm/amd/display: handle nulled pipe context in DCE110's set_drr()
...
|
|
Pull ceph updates from Ilya Dryomov:
"Three CephFS fixes from Xiubo and Luis and a bunch of assorted
cleanups"
* tag 'ceph-for-6.12-rc1' of https://github.com/ceph/ceph-client:
ceph: remove the incorrect Fw reference check when dirtying pages
ceph: Remove empty definition in header file
ceph: Fix typo in the comment
ceph: fix a memory leak on cap_auths in MDS client
ceph: flush all caps releases when syncing the whole filesystem
ceph: rename ceph_flush_cap_releases() to ceph_flush_session_cap_releases()
libceph: use min() to simplify code in ceph_dns_resolve_name()
ceph: Convert to use jiffies macro
ceph: Remove unused declarations
|
|
Pull smb server fixes from Steve French:
- fix querying dentry for char/block special files
- small cleanup patches
* tag 'v6.12-rc-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Correct typos in multiple comments across various files
ksmbd: fix open failure from block and char device file
ksmbd: remove unsafe_memcpy use in session setup
ksmbd: Replace one-element arrays with flexible-array members
ksmbd: fix warning: comparison of distinct pointer types lacks a cast
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull xmb client fixes from Steve French:
- Noisy log message cleanup
- Important netfs fix for cifs crash in generic/074
- Three minor improvements to use of hashing (multichannel and mount
improvements)
- Fix decryption crash for large read with small esize
* tag '6.12rc-more-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: make SHA-512 TFM ephemeral
smb: client: make HMAC-MD5 TFM ephemeral
smb: client: stop flooding dmesg in smb2_calc_signature()
smb: client: allocate crypto only for primary server
smb: client: fix UAF in async decryption
netfs: Fix write oops in generic/346 (9p) and generic/074 (cifs)
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
if an inode backpointer points to a dirent that doesn't point back,
that's an error we should warn about.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the reader acquires the read lock and then the writer enters the slow
path, while the reader proceeds to the unlock path, the following scenario
can occur without the change:
writer: pcpu_read_count(lock) return 1 (so __do_six_trylock will return 0)
reader: this_cpu_dec(*lock->readers)
reader: smp_mb()
reader: state = atomic_read(&lock->state) (there is no waiting flag set)
writer: six_set_bitmask()
then the writer will sleep forever.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we shut down successfully, there shouldn't be any logged ops to
resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a filesystem flag to indicate whether we did a clean recovery -
using c->sb.clean after we've got rw is incorrect, since c->sb is
updated whenever we write the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had a bug where disk accounting keys didn't always have their version
field set in journal replay; change the BUG_ON() to a WARN(), and
exclude this case since it's now checked for elsewhere (in the bkey
validate function).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was added to avoid double-counting accounting keys in journal
replay. But applied incorrectly (easily done since it applies to the
transaction commit, not a particular update), it leads to skipping
in-mem accounting for real accounting updates, and failure to give them
a version number - which leads to journal replay becoming very confused
the next time around.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
give bversions a more distinct name, to aid in grepping
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
