summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-28net: wan: slic_ds26522: fix spelling mistake: "configurated" -> "configured"Colin Ian King
trivial fix to spelling mistake in pr_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net: atm: Fix warnings in net/atm/lec.c when !CONFIG_PROC_FSAugusto Mecking Caringi
This patch fixes the following warnings when CONFIG_PROC_FS is not set: linux/net/atm/lec.c: In function ‘lane_module_cleanup’: linux/net/atm/lec.c:1062:27: error: ‘atm_proc_root’ undeclared (first use in this function) remove_proc_entry("lec", atm_proc_root); ^ linux/net/atm/lec.c:1062:27: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Augusto Mecking Caringi <augustocaringi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28Merge branch 'mlx5-fixes'David S. Miller
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 28-12-2016 Some fixes for mlx5 core and ethernet driver. for -stable: net/mlx5: Check FW limitations on log_max_qp before setting it net/mlx5: Cancel recovery work in remove flow net/mlx5: Avoid shadowing numa_node net/mlx5: Mask destination mac value in ethtool steering rules net/mlx5: Prevent setting multicast macs for VFs net/mlx5e: Don't sync netdev state when not registered net/mlx5e: Disable netdev after close ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5e: Disable netdev after closeSaeed Mahameed
Disable netdev should come after it was closed, although no harm of doing it before -hence the MLX5E_STATE_DESTROYING bit- but it is more natural this way. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5e: Don't sync netdev state when not registeredSaeed Mahameed
Skip setting netdev vxlan ports and netdev rx_mode on driver load when netdev is not yet registered. Synchronizing with netdev state is needed only on reset flow where the netdev remains registered for the whole reset period. This also fixes an access before initialization of net_device.addr_list_lock - which for some reason initialized on register_netdev - where we queued set_rx_mode work on driver load before netdev registration. Fixes: 26e59d8077a3 ("net/mlx5e: Implement mlx5e interface attach/detach callbacks") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5e: Check ets capability before initializing ets settingsHuy Nguyen
During the initial setup, the ets command is sent to firmware without checking if the HCA supports ets. This causes the invalid command error. Add the ets capiblity check before sending firmware command to initialize ets settings. Fixes: e207b7e99176 ("net/mlx5e: ConnectX-4 firmware support for DCBX") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28Revert "net/mlx5: Add MPCNT register infrastructure"Gal Pressman
This reverts commit 7f503169cabd70c1f13b9279c50eca7dfb9a7d51. Fixes: 7f503169cabd ("net/mlx5: Add MPCNT register infrastructure") Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28Revert "net/mlx5e: Expose PCIe statistics to ethtool"Gal Pressman
This reverts commit 9c7262399ba12825f3ca4b00a76d8d5e77c720f5. PCIe counters were introduced in a new firmware version, as a result users with old firmware encountered a syndrome every 200ms due to update stats work. This feature will be re-introduced later with appropriate capabilities infrastructure. Fixes: 9c7262399ba1 ("net/mlx5e: Expose PCIe statistics to ethtool") Signed-off-by: Gal Pressman <galp@mellanox.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Prevent setting multicast macs for VFsMohamad Haj Yahia
Need to check that VF mac address entered by the admin user is either zero or unicast mac. Multicast mac addresses are prohibited. Fixes: 77256579c6b4 ('net/mlx5: E-Switch, Introduce Vport administration functions') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Release FTE lock in error flowMaor Gottlieb
Release the FTE lock when adding rule to the FTE has failed. Fixes: 0fd758d6112f ('net/mlx5: Don't unlock fte while still using it') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Mask destination mac value in ethtool steering rulesMaor Gottlieb
We need to mask the destination mac value with the destination mac mask when adding steering rule via ethtool. Fixes: 1174fce8d1410 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Avoid shadowing numa_nodeEli Cohen
Avoid using a local variable named numa_node to avoid shadowing a public one. Fixes: db058a186f98 ('net/mlx5_core: Set irq affinity hints') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Cancel recovery work in remove flowDaniel Jurgens
If there is pending delayed work for health recovery it must be canceled if the device is being unloaded. Fixes: 05ac2c0b7438 ("net/mlx5: Fix race between PCI error handlers and health work") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Check FW limitations on log_max_qp before setting itNoa Osherovich
When setting HCA capabilities, set log_max_qp to be the minimum between the selected profile's value and the HCA limitation. Fixes: 938fe83c8dcb ('net/mlx5_core: New device capabilities...') Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/mlx5: Disable RoCE on the e-switch management port under switchdev modeOr Gerlitz
Under the switchdev/offloads mode, packets that don't match any e-switch steering rule are sent towards the e-switch management port. We use a NIC HW steering rule set per vport (uplink and VFs) to make them be received into the host OS through the respective vport representor netdevice. Currnetly such missed RoCE packets will not get to this NIC steering rule, and hence VF RoCE will not work over the slow path of the offloads mode. This is b/c these packets will be matched by a steering rule added by the firmware that serves RoCE traffic set on the PF NIC vport which is also the e-switch management port under SRIOV. Disabling RoCE on the e-switch management vport when we are in the offloads mode, will signal to the firmware to remove their RoCE rule, and then the missed RoCE packets will be matched by the representor NIC steering rule as any other missed packets. To achieve that, we disable RoCE on the PF vport. We do that by removing (hot-unplugging) the IB device instance associated with the PF. This is also required by our current model where the PF serves as the uplink representor and hence only SW switching (TC, bridge, OVS) applications and slow path vport mlx5e net-device should be running over that vport. Fixes: c930a3ad7453 ('net/mlx5e: Add devlink based SRIOV mode changes') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28net/sched: cls_flower: Fix missing addr_type in classifyPaul Blakey
Since we now use a non zero mask on addr_type, we are matching on its value (IPV4/IPV6). So before this fix, matching on enc_src_ip/enc_dst_ip failed in SW/classify path since its value was zero. This patch sets the proper value of addr_type for encapsulated packets. Fixes: 970bfcd09791 ('net/sched: cls_flower: Use mask for addr_type') Signed-off-by: Paul Blakey <paulb@mellanox.com> Reviewed-by: Hadar Hen Zion <hadarh@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-28drm: Add kerneldoc markup for new @scan parameters in drm_mmChris Wilson
A couple of parameters slipped through the kerneldoc net. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161228105120.14500-1-chris@chris-wilson.co.uk
2016-12-28drm/mm: Document locking rulesDaniel Vetter
Drivers need to take care. Motivated by a discussion between Mark and Rob on dri-devel. Cc: Mark yao <mark.yao@rock-chips.com> Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: s/alloc|freeing/modifications/ per Chris' suggestion.] Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1482833457-29592-1-git-send-email-daniel.vetter@ffwll.ch
2016-12-28drm: Use drm_mm_insert_node_in_range_generic() for everyoneChris Wilson
Remove a superfluous helper as drm_mm_insert_node is equivalent to insert_node_in_range with a range of [0, U64_MAX]. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-37-chris@chris-wilson.co.uk
2016-12-28drm: Apply range restriction after color adjustment when allocationChris Wilson
mm->color_adjust() compares the hole with its neighbouring nodes. They only abutt before we restrict the hole, so we have to apply color_adjust before we apply the range restriction. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-36-chris@chris-wilson.co.uk
2016-12-28drm: Wrap drm_mm_node.hole_followsChris Wilson
Insulate users from changes to the internal hole tracking within struct drm_mm_node by using an accessor for hole_follows. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> [danvet: resolve conflicts in i915_vma.c] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-12-28drm: Apply tight eviction scanning to color_adjustChris Wilson
Using mm->color_adjust makes the eviction scanner much tricker since we don't know the actual neighbours of the target hole until after it is created (after scanning is complete). To work out whether we need to evict the neighbours because they impact upon the hole, we have to then check the hole afterwards - requiring an extra step in the user of the eviction scanner when they apply color_adjust. v2: Massage kerneldoc. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-34-chris@chris-wilson.co.uk
2016-12-28drm: Simplify drm_mm scan-list manipulationChris Wilson
Since we mandate a strict reverse-order of drm_mm_scan_remove_block() after drm_mm_scan_add_block() we can further simplify the list manipulations when generating the temporary scan-hole. v2: Highlight the games being played with the lists to track the scan holes without allocation. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-33-chris@chris-wilson.co.uk
2016-12-28drm/i915/guc: Assert that all GGTT offsets used by the GuC are mappableChris Wilson
Add an assertion to the plain i915_ggtt_offset() to double check that any offset we hand to the GuC is outside of its unmappable ranges. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161224193146.4402-1-chris@chris-wilson.co.uk Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
2016-12-28drm: Optimise power-of-two alignments in drm_mm_scan_add_block()Chris Wilson
For power-of-two alignments, we can avoid the 64bit divide and do a simple bitwise add instead. v2: s/alignment_mask/remainder_mask/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-32-chris@chris-wilson.co.uk
2016-12-28drm: Compute tight evictions for drm_mm_scanChris Wilson
Compute the minimal required hole during scan and only evict those nodes that overlap. This enables us to reduce the number of nodes we need to evict to the bare minimum. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-31-chris@chris-wilson.co.uk
2016-12-28drm: Fix application of color vs range restriction when scanning drm_mmChris Wilson
The range restriction should be applied after the color adjustment, or else we may inadvertently apply the color adjustment to the restricted hole (and not against its neighbours). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-30-chris@chris-wilson.co.uk
2016-12-28drm: Unconditionally do the range check in drm_mm_scan_add_block()Chris Wilson
Doing the check is trivial (low cost in comparison to overall eviction) and helps simplify the code. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-29-chris@chris-wilson.co.uk
2016-12-28drm: Rename prev_node to hole in drm_mm_scan_add_block()Chris Wilson
Acknowledging that we were building up the hole was more useful to me when reading the code, than knowing the relationship between this node and the previous node. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161222083641.2691-28-chris@chris-wilson.co.uk
2016-12-28platform/x86: fujitsu-laptop: use brightness_set_blocking for LED-setting ↵Micha? K?pie?
callbacks All LED-setting functions in fujitsu-laptop are currently assigned to the brightness_set callback, which is incorrect because they can sleep (due to their use of call_fext_func(), which in turn issues ACPI calls) and the documentation (in include/linux/leds.h) clearly states they must not. Assign them to brightness_set_blocking instead and change them to match the expected function prototype. This change makes it possible to use Fujitsu-specific LEDs with "heavy" triggers, like disk-activity or phy0rx. Fixes: 3a407086090b ("fujitsu-laptop: Add BL power, LED control and radio state information") Fixes: 4f62568c1fcf ("fujitsu-laptop: Support radio LED") Fixes: d6b88f64b0d4 ("fujitsu-laptop: Add support for eco LED") Signed-off-by: Michał Kępień <kernel@kempniu.pl> Acked-by: Jonathan Woithe <jwoithe@just42.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-28platform/x86: fix surface3_button build errorsRandy Dunlap
Fix build errors when I2C=m and SURFACE_3_BUTTON=y. The driver uses i2c interfaces so it should depend on I2C. drivers/built-in.o: In function `surface3_driver_init': surface3_button.c:(.init.text+0x75cb0): undefined reference to `i2c_register_driver' drivers/built-in.o: In function `surface3_driver_exit': surface3_button.c:(.exit.text+0x31a8): undefined reference to `i2c_del_driver' Fixes: 1a64b719d3ae (platform/x86: Introduce button support for the Surface 3) Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Benjamin Tissoires <benjamin.tissoires@gmail.com> Cc: platform-driver-x86@vger.kernel.org Cc: Darren Hart <dvhart@infradead.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2016-12-28drm: Fix O= out-of-tree builds for selftestsDaniel Vetter
Kbuild really doesn't like non-recursive Makefiles, but they do work as long as you build without O= Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 50f0033d1a0f ("drm: Add some kselftests for the DRM range manager (struct drm_mm)") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1482918077-30027-1-git-send-email-daniel.vetter@ffwll.ch
2016-12-27net: stmmac: Fix race between stmmac_drv_probe and stmmac_openFlorian Fainelli
There is currently a small window during which the network device registered by stmmac can be made visible, yet all resources, including and clock and MDIO bus have not had a chance to be set up, this can lead to the following error to occur: [ 473.919358] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): stmmac_dvr_probe: warning: cannot get CSR clock [ 473.919382] stmmaceth 0000:01:00.0: no reset control found [ 473.919412] stmmac - user ID: 0x10, Synopsys ID: 0x42 [ 473.919429] stmmaceth 0000:01:00.0: DMA HW capability register supported [ 473.919436] stmmaceth 0000:01:00.0: RX Checksum Offload Engine supported [ 473.919443] stmmaceth 0000:01:00.0: TX Checksum insertion supported [ 473.919451] stmmaceth 0000:01:00.0 (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer [ 473.921395] libphy: PHY stmmac-1:00 not found [ 473.921417] stmmaceth 0000:01:00.0 eth0: Could not attach to PHY [ 473.921427] stmmaceth 0000:01:00.0 eth0: stmmac_open: Cannot attach to PHY (error: -19) [ 473.959710] libphy: stmmac: probed [ 473.959724] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 0 IRQ POLL (stmmac-1:00) active [ 473.959728] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 1 IRQ POLL (stmmac-1:01) [ 473.959731] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 2 IRQ POLL (stmmac-1:02) [ 473.959734] stmmaceth 0000:01:00.0 eth0: PHY ID 01410cc2 at 3 IRQ POLL (stmmac-1:03) Fix this by making sure that register_netdev() is the last thing being done, which guarantees that the clock and the MDIO bus are available. Fixes: 4bfcbd7abce2 ("stmmac: Move the mdio_register/_unregister in probe/remove") Reported-by: Kweh, Hock Leong <hock.leong.kweh@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-27Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a hash corruption bug in the marvell driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
2016-12-27fscrypt: fix the test_dummy_encryption mount optionTheodore Ts'o
Commit f1c131b45410a: "crypto: xts - Convert to skcipher" now fails the setkey operation if the AES key is the same as the tweak key. Previously this check was only done if FIPS mode is enabled. Now this check is also done if weak key checking was requested. This is reasonable, but since we were using the dummy key which was a constant series of 0x42 bytes, it now caused dummy encrpyption test mode to fail. Fix this by using 0x42... and 0x24... for the two keys, so they are different. Fixes: f1c131b45410a202eb45cc55980a7a9e4e4b4f40 Cc: stable@vger.kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-12-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various ipvlan fixes from Eric Dumazet and Mahesh Bandewar. The most important is to not assume the packet is RX just because the destination address matches that of the device. Such an assumption causes problems when an interface is put into loopback mode. 2) If we retry when creating a new tc entry (because we dropped the RTNL mutex in order to load a module, for example) we end up with -EAGAIN and then loop trying to replay the request. But we didn't reset some state when looping back to the top like this, and if another thread meanwhile inserted the same tc entry we were trying to, we re-link it creating an enless loop in the tc chain. Fix from Daniel Borkmann. 3) There are two different WRITE bits in the MDIO address register for the stmmac chip, depending upon the chip variant. Due to a bug we could set them both, fix from Hock Leong Kweh. 4) Fix mlx4 bug in XDP_TX handling, from Tariq Toukan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: stmmac: fix incorrect bit set in gmac4 mdio addr register r8169: add support for RTL8168 series add-on card. net: xdp: remove unused bfp_warn_invalid_xdp_buffer() openvswitch: upcall: Fix vlan handling. ipv4: Namespaceify tcp_tw_reuse knob net: korina: Fix NAPI versus resources freeing net, sched: fix soft lockup in tc_classify net/mlx4_en: Fix user prio field in XDP forward tipc: don't send FIN message from connectionless socket ipvlan: fix multicast processing ipvlan: fix various issues in ipvlan_process_multicast()
2016-12-27Documentation/unaligned-memory-access.txt: fix incorrect comparison operatorCihangir Akturk
In the actual implementation ether_addr_equal function tests for equality to 0 when returning. It seems in commit 0d74c4 it is somehow overlooked to change this operator to reflect the actual function. Signed-off-by: Cihangir Akturk <cakturk@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-27docs: Fix build failureJohn Brooks
The 80211.tmpl DocBook file was removed in commit 819bf593767c ("docs-rst: sphinxify 802.11 documentation"), but the 80211.xml target was re-added to the Makefile by commit 7ddedebb03b7 ("ALSA: doc: ReSTize writing-an-alsa-driver document"), leading to a failure when building the documentation: *** No rule to make target 'Documentation/DocBook/80211.xml', needed by 'Documentation/DocBook/80211.aux.xml'. cc: stable@vger.kernel.org Signed-off-by: John Brooks <john@fastquake.com> Mea-culpa-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2016-12-27Merge tag 'v4.10-rc1' into docs-nextJonathan Corbet
Linux 4.10-rc1
2016-12-27Merge branch 'omap-for-v4.10/legacy' into omap-for-v4.10/fixesTony Lindgren
2016-12-27ARM: OMAP2+: PRM: Delete an error message for a failed memory allocationMarkus Elfring
Omit an extra message for a memory allocation failure in this function. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flagsPali Rohár
Trying to initialize eMMC slot as SDIO or SD cause failure in n900 port of qemu. eMMC itself is not detected and is not working. Real Nokia N900 harware does not have this problem. As eMMC is really not SDIO or SD based such change is harmless and will fix support for qemu. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: dra72-evm-tps65917: Add voltage supplies to usb_phy, mmc, dssLokesh Vutla
Commit 5d080aa30681 ("ARM: dts: dra72: Add separate dtsi for tps65917") added a separate dtsi for dra72-evm-tps65917 moving all the voltage supplies to this file. But it missed adding voltage supplies to usb_phy, mmc, dss and deleted from dra72-evm-common.dtsi. Adding the voltage supply phandles to these nodes in dra72-evm-tps65917.dtsi Fixes: 5d080aa30681 ("ARM: dts: dra72: Add separate dtsi for tps65917") Reported-by: Carlos Hernandez <ceh@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am57xx-idk: Put USB2 port in peripheral modeRoger Quadros
USB2 port can be operated in dual-role mode but till we have dual-role support in dwc3 driver let's limit this port to peripheral mode. If we don't do so it defaults to host mode. USB1 port is meant for host only operation and we don't want both ports in host only mode. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am57xx-idk: Support VBUS detection on USB2 portRoger Quadros
VBUS detection is available on the board via the palmas PMIC. Use extcon-palmas driver instead of extcon-gpio-usb driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27dt-bindings: input: Specify the interrupt number of TPS65217 power buttonMilo Kim
Specify the power button interrupt number which is from the datasheet. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27dt-bindings: power/supply: Update TPS65217 propertiesMilo Kim
Add interrupt specifiers for USB and AC charger input. Interrupt numbers are from the datasheet. Fix wrong property for compatible string. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27dt-bindings: mfd: Remove TPS65217 interruptsMilo Kim
Interrupt numbers are from the datasheet, so no need to keep them in the ABI. Use the number in the DT file. Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: dts: am335x: Fix the interrupt name of TPS65217Milo Kim
Use 'interrupt-names' for getting the charger interrupt number. Fixes: 1934e89a769b ("ARM: dts: am335x: Add the charger interrupt") Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-12-27ARM: omap2+: fixing wrong strcat for Non-NULL terminated stringManinder Singh
Issue caught with static analysis tool: "Dangerous usage of 'name' (strncpy doesn't always 0-terminate it)" Use strlcpy _includes_ the NUL terminator, and strlcat() which ensures that it won't overflow the buffer. Reported-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Vaneet Narang <v.narang@samsung.com> CC: Russell King <linux@armlinux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit (git 2.34.1) at 2025-09-13 19:45:48 +0000