| Age | Commit message (Collapse) | Author |
|---|
|
When arm64's stack unwinder encounters an exception boundary, it uses
the pt_regs::stackframe created by the entry code, which has a copy of
the PC and FP at the time the exception was taken. The unwinder doesn't
know anything about pt_regs, and reports the PC from the stackframe, but
does not report the LR.
The LR is only guaranteed to contain the return address at function call
boundaries, and can be used as a scratch register at other times, so the
LR at an exception boundary may or may not be a legitimate return
address. It would be useful to report the LR value regardless, as it can
be helpful when debugging, and in future it will be helpful for reliable
stacktrace support.
This patch changes the way we unwind across exception boundaries,
allowing both the PC and LR to be reported. The entry code creates a
frame_record_meta structure embedded within pt_regs, which the unwinder
uses to find the pt_regs. The unwinder can then extract pt_regs::pc and
pt_regs::lr as two separate unwind steps before continuing with a
regular walk of frame records.
When a PC is unwound from pt_regs::lr, dump_backtrace() will log this
with an "L" marker so that it can be identified easily. For example,
an unwind across an exception boundary will appear as follows:
| el1h_64_irq+0x6c/0x70
| _raw_spin_unlock_irqrestore+0x10/0x60 (P)
| __aarch64_insn_write+0x6c/0x90 (L)
| aarch64_insn_patch_text_nosync+0x28/0x80
... with a (P) entry for pt_regs::pc, and an (L) entry for pt_regs:lr.
Note that the LR may be stale at the point of the exception, for example,
shortly after a return:
| el1h_64_irq+0x6c/0x70
| default_idle_call+0x34/0x180 (P)
| default_idle_call+0x28/0x180 (L)
| do_idle+0x204/0x268
... where the LR points a few instructions before the current PC.
This plays nicely with all the other unwind metadata tracking. With the
ftrace_graph profiler enabled globally, and kretprobes installed on
generic_handle_domain_irq() and do_interrupt_handler(), a backtrace triggered
by magic-sysrq + L reports:
| Call trace:
| show_stack+0x20/0x40 (CF)
| dump_stack_lvl+0x60/0x80 (F)
| dump_stack+0x18/0x28
| nmi_cpu_backtrace+0xfc/0x140
| nmi_trigger_cpumask_backtrace+0x1c8/0x200
| arch_trigger_cpumask_backtrace+0x20/0x40
| sysrq_handle_showallcpus+0x24/0x38 (F)
| __handle_sysrq+0xa8/0x1b0 (F)
| handle_sysrq+0x38/0x50 (F)
| pl011_int+0x460/0x5a8 (F)
| __handle_irq_event_percpu+0x60/0x220 (F)
| handle_irq_event+0x54/0xc0 (F)
| handle_fasteoi_irq+0xa8/0x1d0 (F)
| generic_handle_domain_irq+0x34/0x58 (F)
| gic_handle_irq+0x54/0x140 (FK)
| call_on_irq_stack+0x24/0x58 (F)
| do_interrupt_handler+0x88/0xa0
| el1_interrupt+0x34/0x68 (FK)
| el1h_64_irq_handler+0x18/0x28
| el1h_64_irq+0x6c/0x70
| default_idle_call+0x34/0x180 (P)
| default_idle_call+0x28/0x180 (L)
| do_idle+0x204/0x268
| cpu_startup_entry+0x3c/0x50 (F)
| rest_init+0xe4/0xf0
| start_kernel+0x744/0x750
| __primary_switched+0x88/0x98
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-11-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When unwinding stacks, we use unwind_consume_stack() to both find
whether an object (e.g. a frame record) is on an accessible stack *and*
to update the stack boundaries. This works fine today since we only care
about one type of object which does not overlap other objects.
In subsequent patches we'll want to check whether an object (e.g a frame
record) is on the stack and follow this up by accessing a larger object
containing the first (e.g. a pt_regs with an embedded frame record).
To make that pattern easier to implement, this patch reworks
unwind_find_next_stack() and unwind_consume_stack() so that the former
can be used to check if an object is on any accessible stack, and the
latter is purely used to update the stack boundaries.
As unwind_find_next_stack() is modified to also check the stack
currently being unwound, it is renamed to unwind_find_stack().
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When analysing a stacktrace it can be useful to know whether an unwound
PC has been rewritten by fgraph or kretprobes, as in some situations
these may be suspect or be known to be unreliable.
This patch adds flags to track when an unwind entry has recovered the PC
from fgraph and/or kretprobes, and updates dump_backtrace() to log when
this is the case.
The flags recorded are:
"F" - the PC was recovered from fgraph
"K" - the PC was recovered from kretprobes
These flags are recorded and logged in addition to the original source
of the unwound PC.
For example, with the ftrace_graph profiler enabled globally, and
kretprobes installed on generic_handle_domain_irq() and
do_interrupt_handler(), a backtrace triggered by magic-sysrq + L
reports:
| Call trace:
| show_stack+0x20/0x40 (CF)
| dump_stack_lvl+0x60/0x80 (F)
| dump_stack+0x18/0x28
| nmi_cpu_backtrace+0xfc/0x140
| nmi_trigger_cpumask_backtrace+0x1c8/0x200
| arch_trigger_cpumask_backtrace+0x20/0x40
| sysrq_handle_showallcpus+0x24/0x38 (F)
| __handle_sysrq+0xa8/0x1b0 (F)
| handle_sysrq+0x38/0x50 (F)
| pl011_int+0x460/0x5a8 (F)
| __handle_irq_event_percpu+0x60/0x220 (F)
| handle_irq_event+0x54/0xc0 (F)
| handle_fasteoi_irq+0xa8/0x1d0 (F)
| generic_handle_domain_irq+0x34/0x58 (F)
| gic_handle_irq+0x54/0x140 (FK)
| call_on_irq_stack+0x24/0x58 (F)
| do_interrupt_handler+0x88/0xa0
| el1_interrupt+0x34/0x68 (FK)
| el1h_64_irq_handler+0x18/0x28
| el1h_64_irq+0x64/0x68
| default_idle_call+0x34/0x180
| do_idle+0x204/0x268
| cpu_startup_entry+0x40/0x50 (F)
| rest_init+0xe4/0xf0
| start_kernel+0x744/0x750
| __primary_switched+0x80/0x90
Note that as these flags are reported next to the recovered PC value,
they appear on the callers of instrumented functions. For example
gic_handle_irq() has a "K" marker because generic_handle_domain_irq()
was instrumented with kretprobes and had its return address rewritten.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When analysing a stacktrace it can be useful to know where an unwound PC
came from, as in some situations certain sources may be suspect or known
to be unreliable. In future it would also be useful to track this so
that certain unwind steps can be performed in a stateful manner. For
example when unwinding across an exception boundary, we'd ideally unwind
pt_regs::pc, then pt_regs::lr, then the next frame record.
This patch adds an enumerated set of unwind sources, tracks this during
the unwind, and updates dump_backtrace() to log these for interesting
unwind steps.
The interesting sources recorded are:
"C" - the PC came from the caller of an unwind function.
"T" - the PC came from thread_saved_pc() for a blocked task.
"P" - the PC came from a pt_regs::pc.
"U" - the PC came from an unknown source (indicates an unwinder error).
... with nothing recorded when the PC came from a frame_record::pc as
this is the vastly common case and logging this would make it difficult
to spot the more interesting cases.
For example, when triggering a backtrace via magic-sysrq + L, the CPU
handling the sysrq will have a backtrace whose first element is the
caller (C) of dump_backtrace():
| Call trace:
| show_stack+0x18/0x30 (C)
| dump_stack_lvl+0x60/0x80
| dump_stack+0x18/0x24
| nmi_cpu_backtrace+0xfc/0x140
| ...
... and other CPUs will have a backtrace whose first element is their
pt_regs::pc (P) at the instant the backtrace IPI was taken:
| Call trace:
| _raw_spin_unlock_irqrestore+0x8/0x50 (P)
| wake_up_process+0x18/0x24
| process_timeout+0x14/0x20
| call_timer_fn.isra.0+0x24/0x80
| ...
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently dump_backtrace() can only print the PC value at each step of
the unwind, as this is all the information that arch_stack_walk()
passes to the dump_backtrace_entry() callback.
In future we'd like to print some additional information, such as the
origin of entries (e.g. PC, LR, FP) and/or the reliability thereof.
In preparation for doing so, this patch moves dump_backtrace() over to
kunwind_stack_walk(), which passes the full kunwind_state to the
callback.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently the signal handling code has its own struct frame_record,
the definition of struct pt_regs open-codes a frame record as an array,
and the kernel unwinder hard-codes frame record offsets.
Move to a common struct frame_record that can be used throughout the
kernel.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In subsequent patches we'll want to add an additional u64 to struct
pt_regs. To make space, this patch swaps the 'unused' and 'pmr' fields,
as the 'pmr' value only requires bits[7:0] and can safely fit into a
u32, which frees up a 64-bit unused field.
The 'lockdep_hardirqs' and 'exit_rcu' fields should eventually be moved
out of pt_regs and managed locally within entry-common.c, so I've left
those as-is for the moment.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The pt_regs::pmr_save field is weirdly named relative to all other
pt_regs fields, with a '_save' suffix that doesn't make anything clearer
and only leads to more typing to access the field.
Remove the '_save' suffix.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For historical reasons the layout of struct pt_regs depends on the
configured endianness, with the order of the 'syscallno' and 'unused2'
fields varying dependent upon whether __AARCH64EB__ is defined. We no
longer depend on the order of these two fields and can remove the
ifdeffery.
The current conditional layout was introduced in commit:
35d0e6fb4d219d64 ("arm64: syscallno is secretly an int, make it official")
At the time, this was necessary so that the entry assembly could use a
single STP instruction to save the pt_regs::{orig_x0,syscallno} fields,
without logic that was conditional on the endianness of the kernel:
| el0_svc_naked:
| stp x0, xscno, [sp, #S_ORIG_X0] // save the original x0 and syscall number
This logic was converted to C in commit:
f37099b6992a0b81 ("arm64: convert syscall trace logic to C")
Since that commit, we no longer manipulate pt_regs::orig_x0 from
assembly, and only manipulate pt_regs::syscallno as a 32-bit quantity
early in the kernel_entry assembly:
| /* Not in a syscall by default (el0_svc overwrites for real syscall) */
| .if \el == 0
| mov w21, #NO_SYSCALL
| str w21, [sp, #S_SYSCALLNO]
| .endif
Given the above, there's no longer a need for the layout of
pt_regs::{syscallno,unused2} to depend on the endianness of the kernel.
This patch removes the ifdeffery and places 'syscallno' before 'unused2'
regardless of the endianess of the kernel. At the same time, 'unused2'
is renamed to 'unused', as it is the only unused field within pt_regs.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To ensure that the stack is correctly aligned when branching to C code,
we require that struct pt_regs is a multiple of 16 bytes, as noted in a
comment.
Add an explicit assertion for this, so that any accidental violation of
this requirement will be caught by the compiler.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Similarly to what was done to the memcpy() routines, make copy_page()
and clear_page() also use the Armv8.8 FEAT_MOPS instructions.
Note: For copy_page() this uses the CPY* instructions instead of CPYF*
as CPYF* doesn't allow src and dst to be equal. It's not clear if
copy_page() needs to allow equal src and dst but it has worked so far
with the current implementation and there is no documentation forbidding
it.
Note, the unoptimized version of copy_page() in assembler.h is left as
it is.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-6-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Make memcpy(), memmove() and memset() use the Armv8.8 FEAT_MOPS
instructions when implemented on the CPU.
The CPY*/SET* instructions copy or set a block of memory of arbitrary
size and alignment. They can be interrupted by the CPU and the copying
resumed later. Their performance is expected to be close to the best
generic copy/set sequence of loads/stores for a given CPU. Using them in
the kernel's copy/set routines therefore avoids the need to periodically
rewrite the routines to optimize for new microarchitectures. It could
also lead to a performance improvement for some CPUs and systems.
With this change the kernel will always use the instructions if they are
implemented on the CPU (and have not been disabled by the arm64.nomops
command line parameter). When not implemented the usual routines will be
used (patched via alternatives). Note, we need to patch B/NOP instead of
the whole sequence to avoid executing a partially patched sequence in
case the compiler generates a mem*() call inside the alternatives
patching code.
Note that MOPS instructions have relaxed behavior on Device memory, but
it is expected that these routines are not generally used on MMIO.
Note: For memcpy(), this uses the CPY* instructions instead of CPYF*, as
CPY* allows overlaps between the source and destination buffers, and
despite contradicting the C standard, compilers require that memcpy()
work on exactly overlapping source and destination:
https://gcc.gnu.org/onlinedocs/gcc/Standards.html#C-Language
https://reviews.llvm.org/D86993
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-5-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Document that hypervisors must set HCR_EL2.MCE2 and handle MOPS
exceptions when they migrate a vCPU to another type of CPU, as Linux may
not be able to handle the exception at all times.
As one example, when running under nested virtualization, KVM does not
handle MOPS exceptions from the nVHE/hVHE EL2 hyp as the hyp is never
migrated, so the host hypervisor needs to handle them. There may be
other situations (now or in the future) where the kernel can't handle an
unexpected MOPS exception, so require that the hypervisor handles them.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-4-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We will soon be using MOPS instructions in the kernel, so wire up the
exception handler to handle exceptions from EL1 caused by the copy/set
operation being stopped and resumed on a different type of CPU.
Add a helper for advancing the single step state machine, similarly to
what the EL0 exception handler does.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-3-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
FEAT_MOPS instructions require that all three instructions (prologue,
main and epilogue) appear consecutively in memory. Placing a
kprobe/uprobe on one of them doesn't work as only a single instruction
gets executed out-of-line or simulated. So don't allow placing a probe
on a MOPS instruction.
Fixes: b7564127ffcb ("arm64: mops: detect and enable FEAT_MOPS")
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
There is no users of SWAPPER_TABLE_SHIFT after commit 84b04d3e6bdb
("arm64: kernel: Create initial ID map from C code"). Just drop it.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241014030341.995806-1-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ID_AA64MMFR1_EL1 has been updated by the architecture to enumerate several
new architectural features since the last time sysreg was updated, sync
with the definnition in DD0601 2024-09 to include two new versions of each
of ETS and HAFDBS.
Reported-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241011-arm64-aa64mmfr1-2024-09-v1-1-61935a085010@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The GCS stress test program currently uses the PID of the threads it
creates in the test names it reports, resulting in unstable test names
between runs. Fix this by using a thread number instead.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241011-arm64-gcs-stress-stable-name-v1-1-4950f226218e@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Since de66cb37ab6 ("arm64: Add cpucap_is_possible()"),
alternative_has_cap_unlikely() includes the IS_ENABLED() check.
Add CONFIG_ARM64_POE to cpucap_is_possible() to avoid the explicit check.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008140121.2774348-1-joey.gouly@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add trivial assembly programs which give themselves the appropriate
permissions and then execute GCSPUSHM and GCSSTR, they will report errors
by generating signals on the non-permitted instructions. Not using libc
minimises the interaction with any policy set for the system but we skip on
failure to get the permissions in case the system is locked down to make
them inaccessible.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241005-arm64-gcs-test-flags-v1-1-03cb9786c5cd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The tests cover mmap, mprotect hugetlb with MTE prot and COW.
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20241001225220.271178-2-yang@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Enable MTE support for hugetlb.
The MTE page flags will be set on the folio only. When copying
hugetlb folio (for example, CoW), the tags for all subpages will be copied
when copying the first subpage.
When freeing hugetlb folio, the MTE flags will be cleared.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20241001225220.271178-1-yang@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
pgattr_change_is_safe() processes two distinct page table entries that just
happen to be 64 bits for all levels. This changes both arguments to reflect
the actual data type being processed in the function.
This change is important when moving to FEAT_D128 based 128 bit page tables
because it makes it simple to change the entry size in one place.
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241001045804.1119881-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently the kernel TLBs is flushed page by page if the target
VA range is less than MAX_DVM_OPS * PAGE_SIZE, otherwise we'll
brutally issue a TLBI ALL.
But we could optimize it when CPU supports TLB range operations,
convert to use __flush_tlb_range_op() like other tlb range flush
to improve performance.
Co-developed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240923131351.713304-3-wangkefeng.wang@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The __flush_tlb_range_limit_excess() helper will be used when
flush tlb kernel range soon.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20240923131351.713304-2-wangkefeng.wang@huawei.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
v2->v1:
1. Remove the simuation of STP and the related bits.
2. Use arm64_skip_faulting_instruction for single-stepping or FEAT_BTI
scenario.
As Andrii pointed out, the uprobe/uretprobe selftest bench run into a
counterintuitive result that nop and push variants are much slower than
ret variant [0]. The root cause lies in the arch_probe_analyse_insn(),
which excludes 'nop' and 'stp' from the emulatable instructions list.
This force the kernel returns to userspace and execute them out-of-line,
then trapping back to kernel for running uprobe callback functions. This
leads to a significant performance overhead compared to 'ret' variant,
which is already emulated.
Typicall uprobe is installed on 'nop' for USDT and on function entry
which starts with the instrucion 'stp x29, x30, [sp, #imm]!' to push lr
and fp into stack regardless kernel or userspace binary. In order to
improve the performance of handling uprobe for common usecases. This
patch supports the emulation of Arm64 equvialents instructions of 'nop'
and 'push'. The benchmark results below indicates the performance gain
of emulation is obvious.
On Kunpeng916 (Hi1616), 4 NUMA nodes, 64 Arm64 cores@2.4GHz.
xol (1 cpus)
------------
uprobe-nop: 0.916 ± 0.001M/s (0.916M/prod)
uprobe-push: 0.908 ± 0.001M/s (0.908M/prod)
uprobe-ret: 1.855 ± 0.000M/s (1.855M/prod)
uretprobe-nop: 0.640 ± 0.000M/s (0.640M/prod)
uretprobe-push: 0.633 ± 0.001M/s (0.633M/prod)
uretprobe-ret: 0.978 ± 0.003M/s (0.978M/prod)
emulation (1 cpus)
-------------------
uprobe-nop: 1.862 ± 0.002M/s (1.862M/prod)
uprobe-push: 1.743 ± 0.006M/s (1.743M/prod)
uprobe-ret: 1.840 ± 0.001M/s (1.840M/prod)
uretprobe-nop: 0.964 ± 0.004M/s (0.964M/prod)
uretprobe-push: 0.936 ± 0.004M/s (0.936M/prod)
uretprobe-ret: 0.940 ± 0.001M/s (0.940M/prod)
As shown above, the performance gap between 'nop/push' and 'ret'
variants has been significantly reduced. Due to the emulation of 'push'
instruction needs to access userspace memory, it spent more cycles than
the other.
As Mark suggested [1], it is painful to emulate the correct atomicity
and ordering properties of STP, especially when it interacts with MTE,
POE, etc. So this patch just focus on the simuation of 'nop'. The
simluation of STP and related changes will be addressed in a separate
patch.
[0] https://lore.kernel.org/all/CAEf4BzaO4eG6hr2hzXYpn+7Uer4chS0R99zLn02ezZ5YruVuQw@mail.gmail.com/
[1] https://lore.kernel.org/all/Zr3RN4zxF5XPgjEB@J2N7QTR9R3/
CC: Andrii Nakryiko <andrii.nakryiko@gmail.com>
CC: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240909071114.1150053-1-liaochang1@huawei.com
[catalin.marinas@arm.com: small tweaks following MarkR's comments]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The PREEMPT_DISABLE_OFFSET definition was added in commit:
24534b3511828c66 ("arm64: assembler: add macros to conditionally yield the NEON under PREEMPT")
... but hasn't been used since commit:
3931261ecf46151a ("arm64: fpsimd: Bring cond_yield asm macro in line with new rules")
Remove PREEMPT_DISABLE_OFFSET.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The DMA_TO_DEVICE and DMA_FROM_DEVICE defintitons in asm-offsets
duplicate the common defintions from <linux/dma-direction.h> (which used
to live in <linux/dma-mapping.h>), and haven't been used from asseembly
code since commit:
7eacf1858bc86fe9 ("arm64: mm: Remove assembly DMA cache maintenance wrappers")
Remove them both.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The VM_EXEC definition duplicates the common VM_EXEC definition from
<linux/mm.h>. The common definition cannot safely be included by
assembly code but currently we don't need to use VM_EXEC in assembly.
The PAGE_SZ definition duplicates arm64's definition of PAGE_SIZE from
<asm/page-def.h> which can safely be included from assembly code and
should be used directly.
Remove the duplicate definitions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The only user of the MM_CONTEXT_ID defintion was removed in commit:
25b92693a1b67a47 ("arm64: mm: convert cpu_do_switch_mm() to C")
Remove MM_CONTEXT_ID.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The COMPAT_SIGFRAME_REGS_OFFSET and COMPAT_RT_SIGFRAME_REGS_OFFSET
defintions aren't used anywhere.
They were added in commit:
f14d8025d263f3c8 ("arm64: compat: Generate asm offsets for signals")
... and subsequently their only user was removed in commit:
2d071968a4052e58 ("arm64: compat: Remove 32-bit sigreturn code from the vDSO")
... leaving them unused.
Remove them.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The VMA_VM_MM definition is only used by the vma_vm_mm macro, which
itself is unused. The VMA_VM_FLAGS definition isn't used anywhere.
Remove them all.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The TSK_ACTIVE_MM definition isn't used anywhere.
Remove it.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The probe_opcode_t typedef for u32 isn't necessary, and is a source of
confusion as it is easily confused with kprobe_opcode_t, which is a
typedef for __le32.
The typedef is only used within arch/arm64, and all of arm64's commn
insn code uses u32 for the endian-agnostic value of an instruction, so
it'd be clearer to use u32 consistently.
Remove probe_opcode_t and use u32 directly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marnias@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The core kprobes code uses kprobe_opcode_t for the in-memory
representation of an instruction, using 'kprobe_opcode_t *' for XOL
slots. As arm64 instructions are always little-endian 32-bit values,
kprobes_opcode_t should be __le32, but at the moment kprobe_opcode_t
is typedef'd to u32.
Today there is no functional issue as we convert values via
cpu_to_le32() and le32_to_cpu() where necessary, but these conversions
are inconsistent with the types used, causing sparse warnings:
| CHECK arch/arm64/kernel/probes/kprobes.c
| arch/arm64/kernel/probes/kprobes.c:102:21: warning: cast to restricted __le32
| CHECK arch/arm64/kernel/probes/decode-insn.c
| arch/arm64/kernel/probes/decode-insn.c:122:46: warning: cast to restricted __le32
| arch/arm64/kernel/probes/decode-insn.c:124:50: warning: cast to restricted __le32
| arch/arm64/kernel/probes/decode-insn.c:136:31: warning: cast to restricted __le32
Improve this by making kprobes_opcode_t a typedef for __le32 and
consistently using this for pointers to executable instructions. With
this change we can rely on the type system to tell us where conversions
are necessary.
Since kprobe::opcode is changed from u32 to __le32, the existing
le32_to_cpu() converion moves from the point this is initialized (in
arch_prepare_kprobe()) to the points this is consumed when passed to
a handler or text patching function. As kprobe::opcode isn't altered or
consumed elsewhere, this shouldn't result in a functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We share struct arch_probe_insn between krpboes and uprobes, but most of
its fields aren't necessary for uprobes:
* The 'insn' field is only used by kprobes as a pointer to the XOL slot.
* The 'restore' field is only used by probes as the PC to restore after
stepping an instruction in the XOL slot.
* The 'pstate_cc' field isn't used by kprobes or uprobes, and seems to
only exist as a result of copy-pasting the 32-bit arm implementation
of kprobes.
As these fields live in struct arch_probe_insn they cannot use
definitions that only exist when CONFIG_KPROBES=y, such as the
kprobe_opcode_t typedef, which we'd like to use in subsequent patches.
Clean this up by removing the 'pstate_cc' field, and moving the
kprobes-specific fields into the kprobes-specific struct
arch_specific_insn. To make it clear that the fields are related to
stepping instructions in the XOL slot, 'insn' is renamed to 'xol_insn'
and 'restore' is renamed to 'xol_restore'
At the same time, remove the misleading and useless comment above struct
arch_probe_insn.
The should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Syzbot reports a KASAN failure early during boot on arm64 when building
with GCC 12.2.0 and using the Software Tag-Based KASAN mode:
| BUG: KASAN: invalid-access in smp_build_mpidr_hash arch/arm64/kernel/setup.c:133 [inline]
| BUG: KASAN: invalid-access in setup_arch+0x984/0xd60 arch/arm64/kernel/setup.c:356
| Write of size 4 at addr 03ff800086867e00 by task swapper/0
| Pointer tag: [03], memory tag: [fe]
Initial triage indicates that the report is a false positive and a
thorough investigation of the crash by Mark Rutland revealed the root
cause to be a bug in GCC:
> When GCC is passed `-fsanitize=hwaddress` or
> `-fsanitize=kernel-hwaddress` it ignores
> `__attribute__((no_sanitize_address))`, and instruments functions
> we require are not instrumented.
>
> [...]
>
> All versions [of GCC] I tried were broken, from 11.3.0 to 14.2.0
> inclusive.
>
> I think we have to disable KASAN_SW_TAGS with GCC until this is
> fixed
Disable Software Tag-Based KASAN when building with GCC by making
CC_HAS_KASAN_SW_TAGS depend on !CC_IS_GCC.
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: syzbot+908886656a02769af987@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000f362e80620e27859@google.com
Link: https://lore.kernel.org/r/ZvFGwKfoC4yVjN_X@J2N7QTR9R3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218854
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20241014161100.18034-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
As POE support was recently added, update the documentation.
Also note that kernel threads have a default protection key register value.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241001133618.1547996-3-joey.gouly@arm.com
[will: Adjusted wording based on feedback from Kevin]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Restrict kernel threads to only have RWX overlays for pkey 0. This matches
what arch/x86 does, by defaulting to a restrictive PKRU.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kevin Brodsky <Kevin.Brodsky@arm.com>
Link: https://lore.kernel.org/r/20241001133618.1547996-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The driver does not use the pmu_node field, so remove it.
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240919034601.2453-1-cuiyunhui@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
|
|
Pull smb client fixes from Steve French:
"Two fixes for Windows symlink handling"
* tag '6.12-rc2-cifs-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix creating native symlinks pointing to current or parent directory
cifs: Improve creating native symlinks pointing to directory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for some reported problems for 6.12-rc3.
Include in here is:
- fix for yurex driver that was caused in -rc1
- build error fix for usbg network filesystem code
- onboard_usb_dev build fix
- dwc3 driver fixes for reported errors
- gadget driver fix
- new USB storage driver quirk
- xhci resume bugfix
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
net/9p/usbg: Fix build error
USB: yurex: kill needless initialization in yurex_read
Revert "usb: yurex: Replace snprintf() with the safer scnprintf() variant"
usb: xhci: Fix problem with xhci resume from suspend
usb: misc: onboard_usb_dev: introduce new config symbol for usb5744 SMBus support
usb: dwc3: core: Stop processing of pending events if controller is halted
usb: dwc3: re-enable runtime PM after failed resume
usb: storage: ignore bogus device raised by JieLi BR21 USB sound chip
usb: gadget: core: force synchronous registration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix, and a .mailmap update.
The fix is for the rust driver core bindings, turned out that the
from_raw binding wasn't a good idea (don't want to pass a pointer to a
reference counted object without actually incrementing the pointer.)
So this change fixes it up as the from_raw binding came in in -rc1.
The other change is a .mailmap update.
Both have been in linux-next for a while with no reported issues"
* tag 'driver-core-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mailmap: update mail for Fiona Behrens
rust: device: change the from_raw() function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix crash in memcpy on 8xx due to dcbz workaround since recent
changes
Thanks to Christophe Leroy.
* tag 'powerpc-6.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Fix kernel DTLB miss on dcbz
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four small fixes, three in drivers and one in the FC transport class
to add idempotence to state setting"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_transport_fc: Allow setting rport state to current state
scsi: wd33c93: Don't use stale scsi_pointer value
scsi: fnic: Move flush_work initialization out of if block
scsi: ufs: Use pre-calculated offsets in ufshcd_init_lrb()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Add missing dependencies on REGMAP_I2C for several drivers
- Fix memory leak in adt7475 driver
- Relabel Columbiaville temperature sensor in intel-m10-bmc-hwmon
driver to match other sensor labels
* tag 'hwmon-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (max1668) Add missing dependency on REGMAP_I2C
hwmon: (ltc2991) Add missing dependency on REGMAP_I2C
hwmon: (adt7470) Add missing dependency on REGMAP_I2C
hwmon: (adm9240) Add missing dependency on REGMAP_I2C
hwmon: (mc34vr500) Add missing dependency on REGMAP_I2C
hwmon: (tmp513) Add missing dependency on REGMAP_I2C
hwmon: (adt7475) Fix memory leak in adt7475_fan_pwm_config()
hwmon: intel-m10-bmc-hwmon: relabel Columbiaville to CVL Die Temperature
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes for build, run-time errors, and reporting errors:
- ftrace: regression test for a kernel crash when running function
graph tracing and then enabling function profiler.
- rseq: fix for mm_cid test failure.
- vDSO:
- fixes to reporting skip and other error conditions
- changes unconditionally build chacha and getrandom tests on all
architectures to make it easier for them to run in CIs
- build error when sched.h to bring in CLONE_NEWTIME define"
* tag 'linux_kselftest-fixes-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
ftrace/selftest: Test combination of function_graph tracer and function profiler
selftests/rseq: Fix mm_cid test failure
selftests: vDSO: Explicitly include sched.h
selftests: vDSO: improve getrandom and chacha error messages
selftests: vDSO: unconditionally build getrandom test
selftests: vDSO: unconditionally build chacha test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Disable kunit tests for arm64+ACPI
- Fix refcount issue in kunit tests
- Drop constraints on non-conformant 'interrupt-map' in fsl,ls-extirq
- Drop type ref on 'msi-parent in fsl,qoriq-mc binding
- Move elgin,jg10309-01 to its own binding from trivial-devices
* tag 'devicetree-fixes-for-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: Skip kunit tests when arm64+ACPI doesn't populate root node
of: Fix unbalanced of node refcount and memory leaks
dt-bindings: interrupt-controller: fsl,ls-extirq: workaround wrong interrupt-map number
dt-bindings: misc: fsl,qoriq-mc: remove ref for msi-parent
dt-bindings: display: elgin,jg10309-01: Add own binding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev platform driver fix from Helge Deller:
"Switch fbdev drivers back to struct platform_driver::remove()
Now that 'remove()' has been converted to the sane new API, there's
no reason for the 'remove_new()' use, so this converts back to the
traditional and simpler name.
See commits
5c5a7680e67b ("platform: Provide a remove callback that returns no value")
0edb555a65d1 ("platform: Make platform_driver::remove() return void")
for background to this all"
* tag 'fbdev-for-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Switch back to struct platform_driver::remove()
|
