summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-16V4L/DVB (13575): em28xx: Use the complete address/command RC5 code for WinTV ↵Mauro Carvalho Chehab
USB2 This device uses an i2c chip to retrieve the keycode from a RC5 remote. Instead of just getting 6 bits, improve the routine to get 11 bits. This means that the complete RC5 table for Hauppauge Grey IR can be used with this device. Unfortunately, it seems that this IR receiver is not capable of getting the full 14 (or 13 bits) from the RC5 protocol. At lest now, with the new code, it is possible to replace this IR table by another RC5 table. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13573): v4l2-spec: updated revision history, updated version to 2.6.33.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13572): v4l2-spec: Digital Video Timings API documentationMuralidharan Karicheri
This patch updates the v4l2-dvb documentation for the new video timings API added. Also updated the document based on comments from Hans Verkuil. Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13571): v4l: Adding Digital Video Timings APIsMuralidharan Karicheri
This adds the above APIs to the v4l2 core. This is based on version v1.2 of the RFC titled "V4L - Support for video timings at the input/output interface" Following new ioctls are added:- - VIDIOC_ENUM_DV_PRESETS - VIDIOC_S_DV_PRESET - VIDIOC_G_DV_PRESET - VIDIOC_QUERY_DV_PRESET - VIDIOC_S_DV_TIMINGS - VIDIOC_G_DV_TIMINGS Please refer to the RFC for the details. This code was tested using vpfe capture driver on TI's DM365. Following is the test configuration used :- Blu-Ray HD DVD source -> TVP7002 -> DM365 (VPFE) ->DDR A draft version of the TVP7002 driver (currently being reviewed in the mailing list) was used that supports V4L2_DV_1080I60 & V4L2_DV_720P60 presets. A loopback video capture application was used for testing these APIs. This calls following IOCTLS :- - verify the new v4l2_input capabilities flag added - Enumerate available presets using VIDIOC_ENUM_DV_PRESETS - Set one of the supported preset using VIDIOC_S_DV_PRESET - Get current preset using VIDIOC_G_DV_PRESET - Detect current preset using VIDIOC_QUERY_DV_PRESET - Using stub functions in tvp7002, verify VIDIOC_S_DV_TIMINGS and VIDIOC_G_DV_TIMINGS ioctls are received at the sub device. - Tested on 64bit platform by Hans Verkuil Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13569): smsusb: add autodetection support for five additional ↵Michael Krufky
Hauppauge USB IDs Add support for five new Hauppauge Device USB IDs: 2040:b980 2040:b990 2040:c010 2040:c080 2040:c090 Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13567): gspca - sunplus/stk014: Propagate errors to higher level.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13566): gspca - main: New variable usb_err for USB exchanges.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13565): gspca - pac7302: One more webcam is upside-down by default.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13564): gspca - main: Implement vidioc_enum_frameintervals.Antonio Ospite
Some drivers support multiple frameintervals (framerates), make gspca able to enumerate them. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13563): gspca - zc3xx: Bad sensor probe of the webcam 0ac8:305b.Jean-Francois Moine
- probe the webcam (probe sequence from ms-win trace) - update tax5130c init sequences from ms-win newer driver - update tas5130c sequences from ms-win trace - add some comments in the probe code Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13562): gspca - doc: Update webcam list.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13561): gspca - main: Remove unnecessary set to alternate 0.Márton Németh
Calling gspca_set_alt0() in gspca_dev_probe() is not needed as gspca_set_alt0() will do nothing because gspca_dev->alt is always zero at that time. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13560): gspca - main: Cleanup source.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13559): gspca - pac7302: Some webcams are upside-down by default.Jean-Francois Moine
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13557): v4l: Remove unneeded video_device::minor usage in driversLaurent Pinchart
The video_device::minor field is used where it shouldn't, either to - test for error conditions that can't happen anymore with the current v4l-dvb core, - store the value in a driver private field that isn't used anymore, - check the video device type where video_device::vfl_type should be used, or - create the name of a kernel thread that should get a stable name. Remove or fix those use cases. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13556): v4l: Remove unneeded video_device::minor assignmentsLaurent Pinchart
Now that the video_device registration is tested using video_is_registered(), drivers don't need to initialize the video_device::minor field to -1 anymore. Remove those unneeded assignments. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13555): v4l: Use video_device_node_name() instead of the minor numberLaurent Pinchart
Instead of using the minor number in kernel log messages, use the device node name as returned by the video_device_node_name() function. This makes debug, informational and error messages easier to understand for end users. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13554a): v4l: Use the video_drvdata function in driversLaurent Pinchart
Fix all device drivers to use the video_drvdata function instead of maintaining a local list of minor to private data mappings. Call video_set_drvdata to register the driver private pointer when not already done. Where applicable, the local list of mappings is completely removed when it becomes unused. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13553): v4l: Use the video_is_registered function in device driversLaurent Pinchart
Fix all device drivers to use the video_is_registered function instead of checking video_device::minor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13552): v4l: Replace video_is_unregistered with video_is_registeredLaurent Pinchart
Replace the video_is_unregistered function by a video_is_registered function. The V4L2_FL_UNREGISTERED flag is replaced by a V4L2_FL_REGISTERED flag. This change makes the video_is_registered function return coherent results when called on an initialize but not yet registered video_device instance. The function can now be used instead of checking video_device::minor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13551): v4l: Remove video_device::num usage from device driversLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13550): v4l: Use the new video_device_node_name functionLaurent Pinchart
Fix all device drivers to use the new video_device_node_name function. This also strips kernel log messages from the "/dev/" prefix, has the device node location is a userspace policy decision unknown to the kernel. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13549): v4l: Add video_device_node_name functionLaurent Pinchart
Many drivers access the device number (video_device::v4l2_devnode::num) in order to print the video device node name. Add and use a helper function to retrieve the video_device node name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13547): radio: add trivial checks on the tuner and type args.Hans Verkuil
Many radio drivers did not check the tuner and type field correctly for g/s_frequency. These checks have now been added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13546): ir-keymaps: Add table for Terratec Cinergy XS FMMauro Carvalho Chehab
This IR uses NEC protocol, with address=0x14. This keymap is similar to the existing Terratec Cinergy XS, except that: - it contains the full address/command code; - the Music button were mapped as KEY_RADIO; - some keycodes from the previous entry were wrong, IMHO. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13545): em28xx: properly select IR protocol based on the IR tableMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13544): ir-keymaps: mark the new rc5 hauppauge with IR_TYPE_RC5Mauro Carvalho Chehab
While here, move the table to a better place inside the file Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-16V4L/DVB (13543): ir-common: Associate a table with a given protocol typeMauro Carvalho Chehab
While here, convert the protocol types into an enum and define 0 as unknown. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-15asus-laptop: change light sens default values.Corentin Chary
The light sensor disable brightness key and /sys/class/backlight/ control. There was a lot of report from users who didn't understand why they couldn't change their brightness, including: https://bugs.launchpad.net/bugs/222171 https://bugzilla.novell.com/show_bug.cgi?id=514747 http://bugzilla.kernel.org/show_bug.cgi?id=13671 http://bugzilla.kernel.org/show_bug.cgi?id=14432 Now the light sensor is disabled, and if the user want to enable it, the level should be ok. The funny thing is that comments where ok, not code. Cc: stable@kernel.org Cc: Thomas Renninger <trenn@suse.de> Cc: Peter Küppers <peter-mailbox@web.de> Cc: Michael Franzl <michaelfranzl@gmx.at> Cc: Ian Turner <vectro@vectro.org> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15x86, msr/cpuid: Register enough minors for the MSR and CPUID driversH. Peter Anvin
register_chrdev() hardcodes registering 256 minors, presumably to avoid breaking old drivers. However, we need to register enough minors so that we have all possible CPUs. checkpatch warns on this patch, but the patch is correct: NR_CPUS here is a static *upper bound* on the *maximum CPU index* (not *number of CPUs!*) and that is what we want. Reported-and-tested-by: Russ Anderson <rja@sgi.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <tip-*@git.kernel.org>
2009-12-15NFSv4: Fix a regression in the NFSv4 state managerTrond Myklebust
Commit 5601a00d671fe89f9b087513244abcd08ad67e7d (nfs: run state manager in privileged mode) introduces a regression in the NFSv4 code when compiled with CONFIG_NFS_V4_1. The calls to nfs4_end_drain_session() from the main loop in nfs4_state_manager() Oops due to the lack of an NFSv4.1 session when running NFSv4.0. The fix is to move those two calls back into nfs41_init_clientid() and nfs4_reset_session(). The calls to nfs4_end_drain_session() that remain inside nfs4_state_manager() are safe, since the NFSv4.0 code will never set the NFS4CLNT_SESSION_DRAINING bit. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-12-15ipmi: add PNP discovery (ACPI namespace via PNPACPI)Bjorn Helgaas
This allows ipmi_si_intf.c to claim IPMI devices described in the ACPI namespace. Using PNP makes it simpler to parse the IRQ/IO/memory resources of the device. We look at any SPMI tables before looking for devices in the namespace. This is based on ipmi_pci_probe(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ipmi: refer to table as "SPMI", not "ACPI"Bjorn Helgaas
This discovery method uses the SPMI table, not the ACPI namespace. In the future, we will look in the namespace, so let's refer to the table as "SPMI" and save "ACPI" for the namespace. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ipmi: remove unused PCI probe codeBjorn Helgaas
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15PNP: add interface to retrieve ACPI device from a PNPACPI deviceBjorn Helgaas
Add pnp_acpi_device(pnp_dev), which takes a PNP device and returns the associated ACPI device (or NULL, if the device is not a PNPACPI device). This allows us to write a PNP driver that can manage both traditional PNPBIOS and ACPI devices, treating ACPI-only functionality as an optional extension. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Update version to 20091214Bob Moore
Version 20091214. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Move check for valid Thread ID structureDan Carpenter
This change moves the check for a valid Thread ID structure up a few lines to insure that the check is made before the structure is actually used. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Predefined name repair: automatically remove null package elementsBob Moore
This change will automatically remove embedded and trailing NULL package elements from returned package objects that are defined to containe a variable number of sub-packages. The driver is then presented with a package with no null elements to deal with. ACPICA BZ 819. http://www.acpica.org/bugzilla/show_bug.cgi?id=819 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Module-level code: enable _REG execution in same scopeLin Ming
This change enables the execution of _REG methods that appear in the same scope as the module-level code, in resonse to an operation region declaration within the module-level code. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Conditionally perform complex per-predefined-name repairsBob Moore
Only attempt the "complex" repairs (package sorting, buffer expansion) if the previous "generic" validation and repair was successful. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Update function headers and comments, no functional changeBob Moore
Update comments for repair of _FDE and _GTM methods. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Remove messages if predefined repair(s) are successfulBob Moore
Repair mechanism was considered too wordy. Now, messages are only unconditionally emitted if the return object cannot be repaired. Existing messages for successful repairs were converted to ACPI_DEBUG_PRINT messages for now. ACPICA BZ 827. http://www.acpica.org/bugzilla/show_bug.cgi?id=827 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Move Package-to-Buffer repair code into common ToBuffer functionBob Moore
Move code specific to _FDE and _GTM into the generic repair code. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Fix mutex errors when running _REG methodsBob Moore
Fixes a problem where mutex errors can occur when running a _REG method that is in the same scope as a method-defined operation region or an operation region under a module-level IF block. This is rare, so the problem has not been seen before. ACPICA BZ 826. http://www.acpica.org/bugzilla/show_bug.cgi?id=826 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Update function headers, no functional changeBob Moore
Fixed a few errors with the headers in utcopy.c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Add more conversions to predefined name repair moduleBob Moore
This change enhances the automatic repairs/conversions for predefined name return values to make Integers, Strings, and Buffers fully interchangeable. Also, a Buffer can be converted to a Package of Integers if necessary. The nsrepair.c module was completely restructured. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Update internal namespace node/handle interfacesBob Moore
This change deletes the unnecessary acpi_ns_convert_entry_to_handle interface and renames the acpi_ns_map_handle_to_node interface to acpi_ns_validate_handle. ACPICA BZ 798. http://www.acpica.org/bugzilla/show_bug.cgi?id=798 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Add repair for bad _FDE/_GTM buffersBob Moore
The expected return value for both names is a Buffer of 5 DWORDS. This repair fixes two possible problems (both seen in the field): A package of integers is returned, or a buffer of BYTEs is returned. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Fix two additional Scope override error messagesBob Moore
These messages were using the internal path for the message instead of using the node name. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-12-15ACPICA: Fix two Scope type error messagesBob Moore
Both messages incorrectly used the internal Path string instead of the node name. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 08:48:05 +0000