| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux
Pull scsi target fixes from Bart Van Assche:
- a series of bug fixes for the XCOPY implementation from David
Disseldorp
- one bug fix for the ibmvscsis driver, a driver that is used for
communication between partitions on IBM POWER systems.
* 'scsi-target-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/bvanassche/linux:
ibmvscsis: Fix srp_transfer_data fail return code
target: support XCOPY requests without parameters
target: check for XCOPY parameter truncation
target: use XCOPY segment descriptor CSCD IDs
target: check XCOPY segment descriptor CSCD IDs
target: simplify XCOPY wwn->se_dev lookup helper
target: return UNSUPPORTED TARGET/SEGMENT DESC TYPE CODE sense
target: bounds check XCOPY total descriptor list length
target: bounds check XCOPY segment descriptor list
target: use XCOPY TOO MANY TARGET DESCRIPTORS sense
target: add XCOPY target/segment desc sense codes
|
|
For no snapshot case, we should use ci->truncate_{seq,size}.
Fixes: 5f743e456606 ("ceph: record truncate size/seq for snap data writeback")
Signed-off-by: Geng, Jichao <geng.jichao@h3c.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
|
|
We should apply the check after getting the initial mdsmap.
Fixes: e9e427f0a14f ("ceph: check availability of mds cluster on mount")
Link: http://tracker.ceph.com/issues/18161
Signed-off-by: Yan, Zheng <zyan@redhat.com>
|
|
Pull md fixes from Shaohua Li:
"Basically one fix for raid5 cache which is merged in this cycle,
others are trival fixes"
* tag 'md/4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
md/raid5: Use correct IS_ERR() variation on pointer check
md: cleanup mddev flag clear for takeover
md/r5cache: fix spelling mistake on "recoverying"
md/r5cache: assign conf->log before r5l_load_log()
md/r5cache: simplify handling of sh->log_start in recovery
md/raid5-cache: removes unnecessary write-through mode judgments
md/raid10: Refactor raid10_make_request
md/raid1: Refactor raid1_make_request
|
|
When CONFIG_RANDOMIZE_MODULE_REGION_FULL=y, the offset between loaded
modules and the core kernel may exceed 4 GB, putting symbols exported
by the core kernel out of the reach of the ordinary adrp/add instruction
pairs used to generate relative symbol references. So make the adr_l
macro emit a movz/movk sequence instead when executing in module context.
While at it, remove the pointless special case for the stack pointer.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
I have reports of a crash that look like __fput() was called twice for
a NFSv4.0 file. It seems possible that the state manager could try to
reclaim a lock and take a reference on the fl->fl_file at the same time the
file is being released if, during the close(), a signal interrupts the wait
for outstanding IO while removing locks which then skips the removal
of that lock.
Since 83bfff23e9ed ("nfs4: have do_vfs_lock take an inode pointer") has
removed the need to traverse fl->fl_file->f_inode in nfs4_lock_done(),
taking that reference is no longer necessary.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
The correct error checking for dma_map_single() is to use
dma_mapping_error().
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.10-rc4
These fixes address a number of issues in the ch341 driver and includes
a partial revert of a change in how we set the line settings that went
into 4.10-rc1 but which turned out to have undesired side effects. This
included deasserting the modem-control lines when configuring the
device, but also prevented a certain class of CH340 devices from working
with the driver.
Included are also two fixes for two minor information leaks in
kl5kusb105 and ch341 due to failures to detect short control transfers.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Remove Rx overflow log messages as in an environment where logging results
in network traffic logging may cause further overflows.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[simon: reworked changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All block device data fields and functions returning a number of 512B
sectors are by convention named xxx_sectors while names in the form
xxx_size are generally used for a number of bytes. The blk_queue_zone_size
and bdev_zone_size functions were not following this convention so rename
them.
No functional change is introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Collapsed the two patches, they were nonsensically split and broke
bisection.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Jiri Pirko says:
====================
mlxsw: Couple of fixes
Couple of simple fixes from Arkadi and Elad.
Please queue these up for stable. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The event_data starts from address 0x00-0x0C and not from 0x08-0x014. This
leads to duplication with other fields in the Event Queue Element such as
sub-type, cqn and owner.
Fixes: eda6500a987a0 ("mlxsw: Add PCI bus implementation")
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During transmission the skb is checked for headroom in order to
add vendor specific header. In case the skb needs to be re-allocated,
skb_realloc_headroom() is called to make a private copy of the original,
but doesn't release it. Current code assumes that the original skb is
released during reallocation and only releases it at the error path
which causes a memory leak.
Fix this by adding the original skb release to the main path.
Fixes: d003462a50de ("mlxsw: Simplify mlxsw_sx_port_xmit function")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During transmission the skb is checked for headroom in order to
add vendor specific header. In case the skb needs to be re-allocated,
skb_realloc_headroom() is called to make a private copy of the original,
but doesn't release it. Current code assumes that the original skb is
released during reallocation and only releases it at the error path
which causes a memory leak.
Fix this by adding the original skb release to the main path.
Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is CVE-2017-2583. On Intel this causes a failed vmentry because
SS's type is neither 3 nor 7 (even though the manual says this check is
only done for usable SS, and the dmesg splat says that SS is unusable!).
On AMD it's worse: svm.c is confused and sets CPL to 0 in the vmcb.
The fix fabricates a data segment descriptor when SS is set to a null
selector, so that CPL and SS.DPL are set correctly in the VMCS/vmcb.
Furthermore, only allow setting SS to a NULL selector if SS.RPL < 3;
this in turn ensures CPL < 3 because RPL must be equal to CPL.
Thanks to Andy Lutomirski and Willy Tarreau for help in analyzing
the bug and deciphering the manuals.
Reported-by: Xiaohan Zhang <zhangxiaohan1@huawei.com>
Fixes: 79d5b4c3cd809c770d4bf9812635647016c56011
Cc: stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
has_capability() is sometimes needed by modules to test capability
for specified task other than current, so export it.
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Jike Song <jike.song@intel.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Reported by syzkaller:
BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0
IP: _raw_spin_lock+0xc/0x30
PGD 3e28eb067
PUD 3f0ac6067
PMD 0
Oops: 0002 [#1] SMP
CPU: 0 PID: 2431 Comm: test Tainted: G OE 4.10.0-rc1+ #3
Call Trace:
? kvm_ioapic_scan_entry+0x3e/0x110 [kvm]
kvm_arch_vcpu_ioctl_run+0x10a8/0x15f0 [kvm]
? pick_next_task_fair+0xe1/0x4e0
? kvm_arch_vcpu_load+0xea/0x260 [kvm]
kvm_vcpu_ioctl+0x33a/0x600 [kvm]
? hrtimer_try_to_cancel+0x29/0x130
? do_nanosleep+0x97/0xf0
do_vfs_ioctl+0xa1/0x5d0
? __hrtimer_init+0x90/0x90
? do_nanosleep+0x5b/0xf0
SyS_ioctl+0x79/0x90
do_syscall_64+0x6e/0x180
entry_SYSCALL64_slow_path+0x25/0x25
RIP: _raw_spin_lock+0xc/0x30 RSP: ffffa43688973cc0
The syzkaller folks reported a NULL pointer dereference due to
ENABLE_CAP succeeding even without an irqchip. The Hyper-V
synthetic interrupt controller is activated, resulting in a
wrong request to rescan the ioapic and a NULL pointer dereference.
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <linux/kvm.h>
#include <pthread.h>
#include <stddef.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#ifndef KVM_CAP_HYPERV_SYNIC
#define KVM_CAP_HYPERV_SYNIC 123
#endif
void* thr(void* arg)
{
struct kvm_enable_cap cap;
cap.flags = 0;
cap.cap = KVM_CAP_HYPERV_SYNIC;
ioctl((long)arg, KVM_ENABLE_CAP, &cap);
return 0;
}
int main()
{
void *host_mem = mmap(0, 0x1000, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
int kvmfd = open("/dev/kvm", 0);
int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0);
struct kvm_userspace_memory_region memreg;
memreg.slot = 0;
memreg.flags = 0;
memreg.guest_phys_addr = 0;
memreg.memory_size = 0x1000;
memreg.userspace_addr = (unsigned long)host_mem;
host_mem[0] = 0xf4;
ioctl(vmfd, KVM_SET_USER_MEMORY_REGION, &memreg);
int cpufd = ioctl(vmfd, KVM_CREATE_VCPU, 0);
struct kvm_sregs sregs;
ioctl(cpufd, KVM_GET_SREGS, &sregs);
sregs.cr0 = 0;
sregs.cr4 = 0;
sregs.efer = 0;
sregs.cs.selector = 0;
sregs.cs.base = 0;
ioctl(cpufd, KVM_SET_SREGS, &sregs);
struct kvm_regs regs = { .rflags = 2 };
ioctl(cpufd, KVM_SET_REGS, ®s);
ioctl(vmfd, KVM_CREATE_IRQCHIP, 0);
pthread_t th;
pthread_create(&th, 0, thr, (void*)(long)cpufd);
usleep(rand() % 10000);
ioctl(cpufd, KVM_RUN, 0);
pthread_join(th, 0);
return 0;
}
This patch fixes it by failing ENABLE_CAP if without an irqchip.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 5c919412fe61 (kvm/x86: Hyper-V synthetic interrupt controller)
Cc: stable@vger.kernel.org # 4.5+
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reported syzkaller:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
PGD 0
Oops: 0002 [#1] SMP
CPU: 1 PID: 125 Comm: kworker/1:1 Not tainted 4.9.0+ #1
Workqueue: kvm-irqfd-cleanup irqfd_shutdown [kvm]
task: ffff9bbe0dfbb900 task.stack: ffffb61802014000
RIP: 0010:irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass]
Call Trace:
irqfd_shutdown+0x66/0xa0 [kvm]
process_one_work+0x16b/0x480
worker_thread+0x4b/0x500
kthread+0x101/0x140
? process_one_work+0x480/0x480
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x25/0x30
RIP: irq_bypass_unregister_consumer+0x9d/0xb70 [irqbypass] RSP: ffffb61802017e20
CR2: 0000000000000008
The syzkaller folks reported a NULL pointer dereference that due to
unregister an consumer which fails registration before. The syzkaller
creates two VMs w/ an equal eventfd occasionally. So the second VM
fails to register an irqbypass consumer. It will make irqfd as inactive
and queue an workqueue work to shutdown irqfd and unregister the irqbypass
consumer when eventfd is closed. However, the second consumer has been
initialized though it fails registration. So the token(same as the first
VM's) is taken to unregister the consumer through the workqueue, the
consumer of the first VM is found and unregistered, then NULL deref incurred
in the path of deleting consumer from the consumers list.
This patch fixes it by making irq_bypass_register/unregister_consumer()
looks for the consumer entry based on consumer pointer itself instead of
token matching.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduces segemented_write_std.
Switches from emulated reads/writes to standard read/writes in fxsave,
fxrstor, sgdt, and sidt. This fixes CVE-2017-2584, a longstanding
kernel memory leak.
Since commit 283c95d0e389 ("KVM: x86: emulate FXSAVE and FXRSTOR",
2016-11-09), which is luckily not yet in any final release, this would
also be an exploitable kernel memory *write*!
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 96051572c819194c37a8367624b285be10297eca
Fixes: 283c95d0e3891b64087706b344a4b545d04a6e62
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled).
These are implemented with delayed_work structs which can still be
pending when the KVM module is unloaded. We've seen this cause kernel
panics when the kvm_intel module is quickly reloaded.
Use the new static_key_deferred_flush() API to flush pending updates on
module unload.
Signed-off-by: David Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Modules that use static_key_deferred need a way to synchronize with
any delayed work that is still pending when the module is unloaded.
Introduce static_key_deferred_flush() which flushes any pending
jump label updates.
Signed-off-by: David Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This function clearly never worked and always returns true,
as pointed out by gcc-7:
arch/arm/mach-ux500/pm.c: In function 'prcmu_is_cpu_in_wfi':
arch/arm/mach-ux500/pm.c:137:212: error: ?:
using integer constants in boolean context, the expression
will always evaluate to 'true' [-Werror=int-in-bool-context]
With the added braces, the condition actually makes sense.
Fixes: 34fe6f107eab ("mfd : Check if the other db8500 core is in WFI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
According to the code the intention is to append 8 SCK cycles
instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this
will never happened because it's an AC command not an ADTC command.
So fix this by moving the statement into the right function.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Commit e5bbf30733f9 ("mmc: sdhci-acpi: Ensure connected devices are
powered when probing") introduced code to powerup any acpi child
nodes listed in the dstd. But some dstd-s list all possible devices
used on some board variants, while reporting if the device is actually
present and enabled in the status field of the device.
So we end up calling the acpi _PS0 (power-on) method for devices which
are not actually present. This does not always end well, e.g. on my
cube iwork8 air tablet, this results in freezing the entire tablet as
soon as the r8723bs module is loaded.
This commit fixes this by checking the child device's status.present
and status.enabled bits and only call acpi_device_fix_up_power()
if both are set.
Fixes: e5bbf30733f9 ("mmc: sdhci-acpi: Ensure connected devices are powered when probing")
BugLink: https://github.com/hadess/rtl8723bs/issues/80
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When unwinding a task, the end of the stack is always at the same offset
right below the saved pt_regs, regardless of which syscall was used to
enter the kernel. That convention allows the unwinder to verify that a
stack is sane.
However, newly forked tasks don't always follow that convention, as
reported by the following unwinder warning seen by Dave Jones:
WARNING: kernel stack frame pointer at ffffc90001443f30 in kworker/u8:8:30468 has bad value (null)
The warning was due to the following call chain:
(ftrace handler)
call_usermodehelper_exec_async+0x5/0x140
ret_from_fork+0x22/0x30
The problem is that ret_from_fork() doesn't create a stack frame before
calling other functions. Fix that by carefully using the frame pointer
macros.
In addition to conforming to the end of stack convention, this also
makes related stack traces more sensible by making it clear to the user
that ret_from_fork() was involved.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8854cdaab980e9700a81e9ebf0d4238e4bbb68ef.1483978430.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In the following commit:
0100301bfdf5 ("sched/x86: Rewrite the switch_to() code")
... the layout of the 'inactive_task_frame' struct was designed to have
a frame pointer header embedded in it, so that the unwinder could use
the 'bp' and 'ret_addr' fields to report __schedule() on the stack (or
ret_from_fork() for newly forked tasks which haven't actually run yet).
Finish the job by changing get_frame_pointer() to return a pointer to
inactive_task_frame's 'bp' field rather than 'bp' itself. This allows
the unwinder to start one frame higher on the stack, so that it properly
reports __schedule().
Reported-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/598e9f7505ed0aba86e8b9590aa528c6c7ae8dcd.1483978430.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are a handful of callers to save_stack_trace_tsk() and
show_stack() which try to unwind the stack of a task other than current.
In such cases, it's remotely possible that the task is running on one
CPU while the unwinder is reading its stack from another CPU, causing
the unwinder to see stack corruption.
These cases seem to be mostly harmless. The unwinder has checks which
prevent it from following bad pointers beyond the bounds of the stack.
So it's not really a bug as long as the caller understands that
unwinding another task will not always succeed.
In such cases, it's possible that the unwinder may read a KASAN-poisoned
region of the stack. Account for that by using READ_ONCE_NOCHECK() when
reading the stack of another task.
Use READ_ONCE() when reading the stack of the current task, since KASAN
warnings can still be useful for finding bugs in that case.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/4c575eb288ba9f73d498dfe0acde2f58674598f1.1483978430.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are a handful of callers to save_stack_trace_tsk() and
show_stack() which try to unwind the stack of a task other than current.
In such cases, it's remotely possible that the task is running on one
CPU while the unwinder is reading its stack from another CPU, causing
the unwinder to see stack corruption.
These cases seem to be mostly harmless. The unwinder has checks which
prevent it from following bad pointers beyond the bounds of the stack.
So it's not really a bug as long as the caller understands that
unwinding another task will not always succeed.
Since stack "corruption" on another task's stack isn't necessarily a
bug, silence the warnings when unwinding tasks other than current.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/00d8c50eea3446c1524a2a755397a3966629354c.1483978430.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit bbe097f092b0 ("usb: gadget: udc: atmel: fix endpoint name")
introduced a memory leak when unbinding the driver. The endpoint names
would not be freed. Solve that by including the name as a string in struct
usba_ep so it is freed when the endpoint is.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Axius clock error path returns without disabling clock and suspend clock.
Fix it to disable them before returning error.
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
I've found when booting HiKey with the usb gadget cable attached
if I then try to connect via adb, I get an infinite spew of:
dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790ecb18 ep1out, 0)
dwc2 f72c0000.usb: dwc2_hsotg_ep_sethalt(ep ffffffc0790eca18 ep1in, 0)
It seems that the usb autosuspend is suspending the bus shortly
after bootup when the gadget cable is attached. So when adbd
then tries to use the device, it doesn't work and it then tries
to restart it over and over via the ep_sethalt calls (via
FUNCTIONFS_CLEAR_HALT ioctl).
Chen Yu suggested this patch to avoid suspending if we're
in device mode, and it avoids the problem.
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Amit Pundir <amit.pundir@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: John Youn <johnyoun@synopsys.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Chen Yu <chenyu56@huawei.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Suggested-by: Chen Yu <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Commit 05ee799f2021 ("usb: dwc2: Move gadget settings into core_params")
changes to type u16 for DT binding "g-rx-fifo-size" and
"g-np-tx-fifo-size" but use type u32 for "g-tx-fifo-size". Finally the
the first two parameters cannot be passed successfully with wrong data
format. This is found the data transferring broken on 96boards Hikey.
This patch is to change all parameters to u32 type, and verified on
Hikey board the DT parameters can pass successfully.
[johnyoun: minor rebase]
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
When zero endpoints are declared for a function, there is no endpoint
to disable, enable or free, so replace do...while loops with while loops.
Change pre-decrement to post-decrement to iterate the same number of times
when there are endpoints to process.
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Remove DMA memory free from EP disable flow by replacing
dma_alloc_coherent with dmam_alloc_coherent.
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
'cdev->os_desc_req' has been allocated with 'usb_ep_alloc_request()' so
'usb_ep_free_request()' should be used to free it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
Set variables initialized in lpfc_sli4_alloc_resource_identifiers() to
NULL if an error occurred. Otherwise, lpfc_sli4_driver_resource_unset()
attempts to free the memory again.
Signed-off-by: Roberto Sassu <rsassu@suse.de>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that qla2xxx uses the IRQ layer affinity assignment, affinity won't
change over the life time of a device and the notifiers are useless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The first two or three vectors in qla2xxx adapter are global and not
associated with a specific queue. They should not have IRQ affinity
assigned.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The receive callback (in tasklet context) is using RCU to get reference
to associated VF network device but this is not safe. RCU read lock
needs to be held. Found by running with full lockdep debugging
enabled.
Fixes: f207c10d9823 ("hv_netvsc: use RCU to protect vf_netdev")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise, a xfrm policy with sport/dport being set cannot be matched.
Signed-off-by: Martynas Pumputis <martynas@weave.works>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the hw rx checksum is always enabled, and the user couldn't switch
it to sw rx checksum.
Note that the RTL_VER_01 only support sw rx checksum only. Besides,
the hw rx checksum for RTL_VER_02 is disabled after
commit b9a321b48af4 ("r8152: Fix broken RX checksums."). Re-enable it.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support for the Asus Touchpad was recently added. It turns out this
device can fail initialisation (and become unusable) when the RESET
command is sent too soon after the POWER ON command.
Unfortunately the i2c-hid specification does not specify the need for
a delay between these two commands. But it was discovered the Windows
driver has a 1ms delay.
As a result, this patch modifies the i2c-hid module to add a sleep
inbetween the POWER ON and RESET commands which lasts between 1ms and 5ms.
See https://github.com/vlasenko/hid-asus-dkms/issues/24 for further
details.
Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Merge fixes from Andrew Morton:
"27 fixes.
There are three patches that aren't actually fixes. They're simple
function renamings which are nice-to-have in mainline as ongoing net
development depends on them."
* akpm: (27 commits)
timerfd: export defines to userspace
mm/hugetlb.c: fix reservation race when freeing surplus pages
mm/slab.c: fix SLAB freelist randomization duplicate entries
zram: support BDI_CAP_STABLE_WRITES
zram: revalidate disk under init_lock
mm: support anonymous stable page
mm: add documentation for page fragment APIs
mm: rename __page_frag functions to __page_frag_cache, drop order from drain
mm: rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free
mm, memcg: fix the active list aging for lowmem requests when memcg is enabled
mm: don't dereference struct page fields of invalid pages
mailmap: add codeaurora.org names for nameless email commits
signal: protect SIGNAL_UNKILLABLE from unintentional clearing.
mm: pmd dirty emulation in page fault handler
ipc/sem.c: fix incorrect sem_lock pairing
lib/Kconfig.debug: fix frv build failure
mm: get rid of __GFP_OTHER_NODE
mm: fix remote numa hits statistics
mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}
ocfs2: fix crash caused by stale lvb with fsdlm plugin
...
|
|
We set info.count to 1 in mtty_get_irq_info() so static checkers
complain that, "Why do we have impossible conditions?" The answer is
that it seems to be left over dead code that can be safely removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
This is a sample driver for documentation so the impact is probably
pretty low. But we should check that bar_index is valid so we
don't write beyond the end of the mdev_state->region_info[] array.
Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The copy_to_user() function returns the number of bytes which it wasn't
able to copy but we want to return a negative error code.
Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.10
As well as the usual smattering of driver specific fixes collected since
the merge window this has one particularly important fix to the core for
handling of aux_devs which was broken during the merge window by some of
the componentization refactoring.
|
|
Commit 99579ccec4e2 "xfs: skip dirty pages in ->releasepage()" started
to skip dirty pages in xfs_vm_releasepage() which also has the effect
that if a dirty page is truncated, it does not get freed by
block_invalidatepage() and is lingering in LRU list waiting for reclaim.
So a simple loop like:
while true; do
dd if=/dev/zero of=file bs=1M count=100
rm file
done
will keep using more and more memory until we hit low watermarks and
start pagecache reclaim which will eventually reclaim also the truncate
pages. Keeping these truncated (and thus never usable) pages in memory
is just a waste of memory, is unnecessarily stressing page cache
reclaim, and reportedly also leads to anonymous mmap(2) returning ENOMEM
prematurely.
So instead of just skipping dirty pages in xfs_vm_releasepage(), return
to old behavior of skipping them only if they have delalloc or unwritten
buffers and fix the spurious warnings by warning only if the page is
clean.
CC: stable@vger.kernel.org
CC: Brian Foster <bfoster@redhat.com>
CC: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Petr Tůma <petr.tuma@d3s.mff.cuni.cz>
Fixes: 99579ccec4e271c3d4d4e7c946058766812afdab
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull networking fixes from David Miller:
1) Fix rtlwifi crash, from Larry Finger.
2) Memory disclosure in appletalk ipddp routing code, from Vlad
Tsyrklevich.
3) r8152 can erroneously split an RX packet into multiple URBs if the
Rx FIFO is not empty when we suspend. Fix this by waiting for the
FIFO to empty before suspending. From Hayes Wang.
4) Two GRO fixes (enter slow path when not enough SKB tail room exists,
disable frag0 optimizations when there are IPV6 extension headers)
from Eric Dumazet and Herbert Xu.
5) A series of mlx5e bug fixes (do source udp port offloading for
tunnels properly, Ip fragment matching fixes, handling firmware
errors properly when installing TC rules, etc.) from Saeed Mahameed,
Or Gerlitz, Roi Dayan, Hadar Hen Zion, Gil Rockah, and Daniel
Jurgens.
6) Two VRF fixes from David Ahern (don't skip multipath selection for
VRF paths, disallow VRF to be configured with table ID 0).
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
net: vrf: do not allow table id 0
net: phy: marvell: fix Marvell 88E1512 used in SGMII mode
sctp: Fix spelling mistake: "Atempt" -> "Attempt"
net: ipv4: Fix multipath selection with vrf
cgroup: move CONFIG_SOCK_CGROUP_DATA to init/Kconfig
gro: use min_t() in skb_gro_reset_offset()
net/mlx5: Only cancel recovery work when cleaning up device
net/mlx5e: Remove WARN_ONCE from adaptive moderation code
net/mlx5e: Un-register uplink representor on nic_disable
net/mlx5e: Properly handle FW errors while adding TC rules
net/mlx5e: Fix kbuild warnings for uninitialized parameters
net/mlx5e: Set inline mode requirements for matching on IP fragments
net/mlx5e: Properly get address type of encapsulation IP headers
net/mlx5e: TC ipv4 tunnel encap offload error flow fixes
net/mlx5e: Warn when rejecting offload attempts of IP tunnels
net/mlx5e: Properly handle offloading of source udp port for IP tunnels
gro: Disable frag0 optimization on IPv6 ext headers
gro: Enter slow-path if there is no tailroom
mlx4: Return EOPNOTSUPP instead of ENOTSUPP
net/af_iucv: don't use paged skbs for TX on HiperSockets
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a regression in aesni that renders it useless if it's
built-in with a modular pcbc configuration"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni - Fix failure when built-in with modular pcbc
|
