Age | Commit message (Collapse) | Author |
|
In a system(Huawei Ascend ARM64 SoC) using HBM, a multi-bit ECC error
occurs, and the BIOS will mark the corresponding area (for example, 2 MB)
as unusable. When the system restarts next time, these areas are not
reported or reported as EFI_UNUSABLE_MEMORY. Both cases lead to an
increase in the number of memblocks, whereas EFI_UNUSABLE_MEMORY leads to
a larger number of memblocks.
For example, if the EFI_UNUSABLE_MEMORY type is reported:
...
memory[0x92] [0x0000200834a00000-0x0000200835bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x93] [0x0000200835c00000-0x0000200835dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x94] [0x0000200835e00000-0x00002008367fffff], 0x0000000000a00000 bytes on node 7 flags: 0x0
memory[0x95] [0x0000200836800000-0x00002008369fffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x96] [0x0000200836a00000-0x0000200837bfffff], 0x0000000001200000 bytes on node 7 flags: 0x0
memory[0x97] [0x0000200837c00000-0x0000200837dfffff], 0x0000000000200000 bytes on node 7 flags: 0x4
memory[0x98] [0x0000200837e00000-0x000020087fffffff], 0x0000000048200000 bytes on node 7 flags: 0x0
memory[0x99] [0x0000200880000000-0x0000200bcfffffff], 0x0000000350000000 bytes on node 6 flags: 0x0
memory[0x9a] [0x0000200bd0000000-0x0000200bd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9b] [0x0000200bd0200000-0x0000200bd07fffff], 0x0000000000600000 bytes on node 6 flags: 0x0
memory[0x9c] [0x0000200bd0800000-0x0000200bd09fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9d] [0x0000200bd0a00000-0x0000200fcfffffff], 0x00000003ff600000 bytes on node 6 flags: 0x0
memory[0x9e] [0x0000200fd0000000-0x0000200fd01fffff], 0x0000000000200000 bytes on node 6 flags: 0x4
memory[0x9f] [0x0000200fd0200000-0x0000200fffffffff], 0x000000002fe00000 bytes on node 6 flags: 0x0
...
The EFI memory map is parsed to construct the memblock arrays before the
memblock arrays can be resized. As the result, memory regions beyond
INIT_MEMBLOCK_REGIONS are lost.
Add a new macro INIT_MEMBLOCK_MEMORY_REGIONS to replace
INIT_MEMBLOCK_REGTIONS to define the size of the static memblock.memory
array.
Allow overriding memblock.memory array size with architecture defined
INIT_MEMBLOCK_MEMORY_REGIONS and make arm64 to set
INIT_MEMBLOCK_MEMORY_REGIONS to 1024 when CONFIG_EFI is enabled.
Link: https://lkml.kernel.org/r/20220615102742.96450-1-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Darren Hart <darren@os.amperecomputing.com>
Acked-by: Will Deacon <will@kernel.org> [arm64]
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Xu Qiang <xuqiang36@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 7267ec008b5c ("mm: postpone page table allocation until we
have page to map"), do_fault_around is not called with page table lock
held. Cleanup the corresponding comments.
Link: https://lkml.kernel.org/r/20220716080359.38791-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The number of scanned pages can be lower than the number of isolated pages
when isolating mirgratable or free pageblock. The metric is being
reported in trace event and also used in vmstat.
some example output from trace where it shows nr_taken can be greater
than nr_scanned:
Produced by kernel v5.19-rc6
kcompactd0-42 [001] ..... 1210.268022: mm_compaction_isolate_migratepages: range=(0x107ae4 ~ 0x107c00) nr_scanned=265 nr_taken=255
[...]
kcompactd0-42 [001] ..... 1210.268382: mm_compaction_isolate_freepages: range=(0x215800 ~ 0x215a00) nr_scanned=13 nr_taken=128
kcompactd0-42 [001] ..... 1210.268383: mm_compaction_isolate_freepages: range=(0x215600 ~ 0x215680) nr_scanned=1 nr_taken=128
mm_compaction_isolate_migratepages does not seem to have this
behaviour, but for the reason of consistency, nr_scanned should also be
taken care of in that side.
This behaviour is confusing since currently the count for isolated pages
takes account of compound page but not for the case of scanned pages. And
given that the number of isolated pages(nr_taken) reported in
mm_compaction_isolate_template trace event is on a single-page basis, the
ambiguity when reporting the number of scanned pages can be removed by
also including compound page count.
Link: https://lkml.kernel.org/r/20220711202806.22296-1-william.lam@bytedance.com
Signed-off-by: William Lam <william.lam@bytedance.com>
Reviewed-by: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The test va_128TBswitch.c exercises a feature only supported on PPC and
x86_64, but it's run on other 64-bit archs as well. Before this patch,
the test did nothing and returned 0 for KSFT_PASS. This patch makes it
return the KSFT codes from kselftest.h, including KSFT_SKIP when
appropriate.
Verified on arm64 and x86_64.
Link: https://lkml.kernel.org/r/20220704123813.427625-1-adam@wowsignal.io
Signed-off-by: Adam Sindelar <adam@wowsignal.io>
Cc: David Vernet <void@manifault.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mrelease_test should return KSFT_SKIP when process_mrelease is not
defined, but due to a perror call consuming the errno, it returns
KSFT_FAIL.
This patch decides the exit code before calling perror.
[adam@wowsignal.io: fix remaining instances of errno mishandling]
Link: https://lkml.kernel.org/r/20220706141602.10159-1-adam@wowsignal.io
Link: https://lkml.kernel.org/r/20220704173351.19595-1-adam@wowsignal.io
Fixes: 33776141b812 ("selftests: vm: add process_mrelease tests")
Signed-off-by: Adam Sindelar <adam@wowsignal.io>
Reviewed-by: David Vernet <void@manifault.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Yafang Shao reported an issue related to the accounting of bpf memory:
if a bpf map is charged indirectly for memory consumed from an
interrupt context and allocations are enforced, MEMCG_MAX events are
not raised.
It's not/less of an issue in a generic case because consequent
allocations from a process context will trigger the direct reclaim and
MEMCG_MAX events will be raised. However a bpf map can belong to a
dying/abandoned memory cgroup, so there will be no allocations from a
process context and no MEMCG_MAX events will be triggered.
Link: https://lkml.kernel.org/r/20220702033521.64630-1-roman.gushchin@linux.dev
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Restructure the logic in filemap_write_and_wait_range to simplify the code
and make it more consistent with file_write_and_wait_range. No functional
change intended.
Link: https://lkml.kernel.org/r/20220627132351.55680-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the beginning, charged is set to 0 to avoid calling vm_unacct_memory
twice because vm_unacct_memory will be called by above unmap_region. But
since commit 4f74d2c8e827 ("vm: remove 'nr_accounted' calculations from
the unmap_vmas() interfaces"), unmap_region doesn't call vm_unacct_memory
anymore. So charged shouldn't be set to 0 now otherwise the calling to
paired vm_unacct_memory will be missed and leads to imbalanced account.
Link: https://lkml.kernel.org/r/20220618082027.43391-1-linmiaohe@huawei.com
Fixes: 4f74d2c8e827 ("vm: remove 'nr_accounted' calculations from the unmap_vmas() interfaces")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When munmapping a vma, the mmap_lock can be degraded to a write before
calling close() on the file handle. The binder close() function calls
binder_alloc_set_vma() to clear the vma address, which now has a lock dep
check for writing on the mmap_lock. Change the lockdep check to ensure
the reading lock is held while clearing and keep the write check while
writing.
Link: https://lkml.kernel.org/r/20220627151857.2316964-1-Liam.Howlett@oracle.com
Fixes: 472a68df605b ("android: binder: stop saving a pointer to the VMA")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+da54fa8d793ca89c741f@syzkaller.appspotmail.com
Acked-by: Todd Kjos <tkjos@google.com>
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Do not record a pointer to a VMA outside of the mmap_lock for later use.
This is unsafe and there are a number of failure paths *after* the
recorded VMA pointer may be freed during setup. There is no callback to
the driver to clear the saved pointer from generic mm code. Furthermore,
the VMA pointer may become stale if any number of VMA operations end up
freeing the VMA so saving it was fragile to being with.
Instead, change the binder_alloc struct to record the start address of the
VMA and use vma_lookup() to get the vma when needed. Add lockdep
mmap_lock checks on updates to the vma pointer to ensure the lock is held
and depend on that lock for synchronization of readers and writers - which
was already the case anyways, so the smp_wmb()/smp_rmb() was not
necessary.
[akpm@linux-foundation.org: fix drivers/android/binder_alloc_selftest.c]
Link: https://lkml.kernel.org/r/20220621140212.vpkio64idahetbyf@revolver
Fixes: da1b9564e85b ("android: binder: fix the race mmap and alloc_new_buf_locked")
Reported-by: syzbot+58b51ac2b04e388ab7b0@syzkaller.appspotmail.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Move mt_init out of the way for the maple tree. Use mips_mt prefix to
match the rest of the functions in the file.
Link: https://lkml.kernel.org/r/20220504002554.654642-2-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot is reporting double kfree() at free_prealloced_shrinker() [1], for
destroy_unused_super() calls free_prealloced_shrinker() even if
prealloc_shrinker() returned an error. Explicitly clear shrinker name
when prealloc_shrinker() called kfree().
[roman.gushchin@linux.dev: zero shrinker->name in all cases where shrinker->name is freed]
Link: https://lkml.kernel.org/r/YtgteTnQTgyuKUSY@castle
Link: https://syzkaller.appspot.com/bug?extid=8b481578352d4637f510 [1]
Link: https://lkml.kernel.org/r/ffa62ece-6a42-2644-16cf-0d33ef32c676@I-love.SAKURA.ne.jp
Fixes: e33c267ab70de424 ("mm: shrinkers: provide shrinkers with names")
Reported-by: syzbot <syzbot+8b481578352d4637f510@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
nfsd_setattr() now sets a security label if provided, and nfsv4 provides
it in the 'open' and 'create' paths and the 'setattr' path.
If setting the label failed (including because the kernel doesn't
support labels), an error field in 'struct nfsd_attrs' is set, and the
caller can respond. The open/create callers clear
FATTR4_WORD2_SECURITY_LABEL in the returned attr set in this case.
The setattr caller returns the error.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The NFS protocol includes attributes when creating symlinks.
Linux does store attributes for symlinks and allows them to be set,
though they are not used for permission checking.
NFSD currently doesn't set standard (struct iattr) attributes when
creating symlinks, but for NFSv4 it does set ACLs and security labels.
This is inconsistent.
To improve consistency, pass the provided attributes into nfsd_symlink()
and call nfsd_create_setattr() to set them.
NOTE: this results in a behaviour change for all NFS versions when the
client sends non-default attributes with a SYMLINK request. With the
Linux client, the only attributes are:
attr.ia_mode = S_IFLNK | S_IRWXUGO;
attr.ia_valid = ATTR_MODE;
so the final outcome will be unchanged. Other clients might sent
different attributes, and if they did they probably expect them to be
honoured.
We ignore any error from nfsd_create_setattr(). It isn't really clear
what should be done if a file is successfully created, but the
attributes cannot be set. NFS doesn't allow partial success to be
reported. Reporting failure is probably more misleading than reporting
success, so the status is ignored.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The attributes that nfsd might want to set on a file include 'struct
iattr' as well as an ACL and security label.
The latter two are passed around quite separately from the first, in
part because they are only needed for NFSv4. This leads to some
clumsiness in the code, such as the attributes NOT being set in
nfsd_create_setattr().
We need to keep the directory locked until all attributes are set to
ensure the file is never visibile without all its attributes. This need
combined with the inconsistent handling of attributes leads to more
clumsiness.
As a first step towards tidying this up, introduce 'struct nfsd_attrs'.
This is passed (by reference) to vfs.c functions that work with
attributes, and is assembled by the various nfs*proc functions which
call them. As yet only iattr is included, but future patches will
expand this.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Between opening a file and setting a delegation on it, someone could
rename or unlink the dentry. If this happens, we do not want to grant a
delegation on the open.
On a CLAIM_NULL open, we're opening by filename, and we may (in the
non-create case) or may not (in the create case) be holding i_rwsem
when attempting to set a delegation. The latter case allows a
race.
After getting a lease, redo the lookup of the file being opened and
validate that the resulting dentry matches the one in the open file
description.
To properly redo the lookup we need an rqst pointer to pass to
nfsd_lookup_dentry(), so make sure that is available.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently, we pass the fh of the opened file down through several
functions so that alloc_init_deleg can pass it to delegation_blocked.
The filehandle of the open file is available in the nfs4_file however,
so there's no need to pass it in a separate argument.
Drop the argument from alloc_init_deleg, nfs4_open_delegation and
nfs4_set_delegation.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor so that CB_OFFLOAD arguments can be passed without
allocating a whole struct nfsd4_copy object. On my system (x86_64)
this removes another 96 bytes from struct nfsd4_copy.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor for legibility.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Instead of manufacturing a phony struct nfsd_file, pass the
struct file returned by nfs42_ssc_open() directly to
nfsd4_do_copy().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: Now that nfsd4_do_copy() no longer calls the cleanup
helpers, plumb the use of struct file pointers all the way down to
_nfsd_copy_file_range().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Move the nfsd4_cleanup_*() call sites out of nfsd4_do_copy(). A
subsequent patch will modify one of the new call sites to avoid
the need to manufacture the phony struct nfsd_file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The @src parameter is sometimes a pointer to a struct nfsd_file and
sometimes a pointer to struct file hiding in a phony struct
nfsd_file. Refactor nfsd4_cleanup_inter_ssc() so the @src parameter
is always an explicit struct file.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: saves 8 bytes, and we can replace check_and_set_stop_copy()
with an atomic bitop.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: All call sites are in fs/nfsd/nfs4proc.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pack the fields to reduce the size of struct nfsd4_op, which is used
an array in struct nfsd4_compoundargs.
sizeof(struct nfsd4_op):
Before: /* size: 672, cachelines: 11, members: 5 */
After: /* size: 640, cachelines: 10, members: 5 */
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
struct nfsd4_copy is part of struct nfsd4_op, which resides in an
8-element array.
sizeof(struct nfsd4_op):
Before: /* size: 1696, cachelines: 27, members: 5 */
After: /* size: 672, cachelines: 11, members: 5 */
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
struct nfsd4_copy_notify is part of struct nfsd4_op, which resides
in an 8-element array.
sizeof(struct nfsd4_op):
Before: /* size: 2208, cachelines: 35, members: 5 */
After: /* size: 1696, cachelines: 27, members: 5 */
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Suggested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In function ‘strncpy’,
inlined from ‘nfsd4_ssc_setup_dul’ at /home/cel/src/linux/manet/fs/nfsd/nfs4proc.c:1392:3,
inlined from ‘nfsd4_interssc_connect’ at /home/cel/src/linux/manet/fs/nfsd/nfs4proc.c:1489:11:
/home/cel/src/linux/manet/include/linux/fortify-string.h:52:33: warning: ‘__builtin_strncpy’ specified bound 63 equals destination size [-Wstringop-truncation]
52 | #define __underlying_strncpy __builtin_strncpy
| ^
/home/cel/src/linux/manet/include/linux/fortify-string.h:89:16: note: in expansion of macro ‘__underlying_strncpy’
89 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Similar changes to nfsd4_encode_readv(), all bundled into a single
patch.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: Use a helper instead of open-coding the calculation of
the XDR pad size.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean-up: Now that nfsd4_encode_readv() does not have to encode the
EOF or rd_length values, it no longer needs to subtract 8 from
@starting_len.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
write_bytes_to_xdr_buf() is pretty expensive to use for inserting
an XDR data item that is always 1 XDR_UNIT at an address that is
always XDR word-aligned.
Since both the readv and splice read paths encode EOF and maxcount
values, move both to a common code path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor: Make the EOF result available in the entire NFSv4 READ
path.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Do the test_bit() once -- this reduces the number of locked-bus
operations and makes the function a little easier to read.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
write_bytes_to_xdr_buf() is a generic way to place a variable-length
data item in an already-reserved spot in the encoding buffer.
However, it is costly. In nfsd4_encode_fattr(), it is unnecessary
because the data item is fixed in size and the buffer destination
address is always word-aligned.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
write_bytes_to_xdr_buf() is a generic way to place a variable-length
data item in an already-reserved spot in the encoding buffer.
However, it is costly, and here, it is unnecessary because the
data item is fixed in size, the buffer destination address is
always word-aligned, and the destination location is already in
@p.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This printk pops every time nfsd.ko gets plugged in. Most kmods don't do
that and this one is not very informative. Olaf's email address seems to
be defunct at this point anyway. Just drop it.
Cc: Olaf Kirch <okir@suse.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Currently there is no limit on how many v4 clients are supported
by the system. This can be a problem in systems with small memory
configuration to function properly when a very large number of
clients exist that creates memory shortage conditions.
This patch enforces a limit of 1024 NFSv4 clients, including courtesy
clients, per 1GB of system memory. When the number of the clients
reaches the limit, requests that create new clients are returned
with NFS4ERR_DELAY and the laundromat is kicked start to trim old
clients. Due to the overhead of the upcall to remove the client
record, the maximun number of clients the laundromat removes on
each run is limited to 128. This is done to ensure the laundromat
can still process the other tasks in a timely manner.
Since there is now a limit of the number of clients, the 24-hr
idle time limit of courtesy client is no longer needed and was
removed.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add counter nfs4_client_count to keep track of the total number
of v4 clients, including courtesy clients, in the system.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This patch moves the v4 specific code from nfsd_init_net() to
nfsd4_init_leases_net() helper in nfs4state.c
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The documenting comment for struct nf_file states:
/*
* A representation of a file that has been opened by knfsd. These are hashed
* in the hashtable by inode pointer value. Note that this object doesn't
* hold a reference to the inode by itself, so the nf_inode pointer should
* never be dereferenced, only used for comparison.
*/
Replace the two existing dereferences to make the comment always
true.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The last close of a file should enable other accessors to open and
use that file immediately. Leaving the file open in the filecache
prevents other users from accessing that file until the filecache
garbage-collects the file -- sometimes that takes several seconds.
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://bugzilla.linux-nfs.org/show_bug.cgi?387
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Avoid recording the allocation of an nfsd_file item that is
immediately released because a matching item was already
inserted in the hash.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
These tracepoints collect different information: the create case does
not open a file, so there's no nf_file available.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Enable the filecache hash table to start small, then grow with the
workload. Smaller server deployments benefit because there should
be lower memory utilization. Larger server deployments should see
improved scaling with the number of open files.
Suggested-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add code to initialize and tear down an rhashtable. The rhashtable
is not used yet.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In a moment, the nfsd_file_hashtbl global will be replaced with an
rhashtable. Replace the one or two spots that need to check if the
hash table is available. We can easily reuse the SHUTDOWN flag for
this purpose.
Document that this mechanism relies on callers to hold the
nfsd_mutex to prevent init, shutdown, and purging to run
concurrently.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|