| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"As we've enabled multiplatform kernels on ARM, and greatly done away
with the contents under arch/arm/mach-*, there's still need for
SoC-related drivers to go somewhere.
Many of them go in through other driver trees, but we still have
drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code
that might be shared between ARM and ARM64 (or just in general makes
sense to not have under the architecture directory).
This branch contains mostly such code:
- Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to
communicate with power management blocks on these SoCs for use by
clock, regulator and bus frequency drivers.
- Allwinner Reduced Serial Bus driver, again used to communicate with
PMICs.
- Drivers for ARM's SCPI (System Control Processor). Not to be
confused with PSCI (Power State Coordination Interface). SCPI is
used to communicate with the assistant embedded cores doing power
management, and we have yet to see how many of them will implement
this for their hardware vs abstracting in other ways (or not at all
like in the past).
- To make confusion between SCPI and PSCI more likely, this release
also includes an update of PSCI to interface version 1.0.
- Rockchip support for power domains.
- A driver to talk to the firmware on Raspberry Pi"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits)
soc: qcom: smd-rpm: Correct size of outgoing message
bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus
bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings
ARM: bcm2835: add mutual inclusion protection
drivers: psci: make PSCI 1.0 functions initialization version dependent
dt-bindings: Correct paths in Rockchip power domains binding document
soc: rockchip: power-domain: don't try to print the clock name in error case
soc: qcom/smem: add HWSPINLOCK dependency
clk: berlin: add cpuclk
ARM: berlin: dts: add CLKID_CPU for BG2Q
ARM: bcm2835: Add the Raspberry Pi firmware driver
soc: qcom: smem: Move RPM message ram out of smem DT node
soc: qcom: smd-rpm: Correct the active vs sleep state flagging
soc: qcom: smd: delete unneeded of_node_put
firmware: qcom-scm: build for correct architecture level
soc: qcom: smd: Correct SMEM items for upper channels
qcom-scm: add missing prototype for qcom_scm_is_available()
qcom-scm: fix endianess issue in __qcom_scm_is_call_available
soc: qcom: smd: Reject send of too big packets
soc: qcom: smd: Handle big endian CPUs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Olof Johansson:
"New and/or improved SoC support for this release:
Marvell Berlin:
- Enable standard DT-based cpufreq
- Add CPU hotplug support
Freescale:
- Ethernet init for i.MX7D
- Suspend/resume support for i.MX6UL
Allwinner:
- Support for R8 chipset (used on NTC's $9 C.H.I.P board)
Mediatek:
- SMP support for some platforms
Uniphier:
- L2 support
- Cleaned up SMP support, etc.
plus a handful of other patches around above functionality, and a few
other smaller changes"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
ARM: uniphier: rework SMP operations to use trampoline code
ARM: uniphier: add outer cache support
Documentation: EXYNOS: Update bootloader interface on exynos542x
ARM: mvebu: add broken-idle option
ARM: orion5x: use mac_pton() helper
ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned
ARM: sunxi: Add R8 support
ARM: digicolor: select pinctrl/gpio driver
arm: berlin: add CPU hotplug support
arm: berlin: use non-self-cleared reset register to reset cpu
ARM: mediatek: add smp bringup code
ARM: mediatek: enable gpt6 on boot up to make arch timer working
soc: mediatek: Fix random hang up issue while kernel init
soc: ti: qmss: make acc queue support optional in the driver
soc: ti: add firmware file name as part of the driver
Documentation: dt: soc: Add description for knav qmss driver
ARM: S3C64XX: Use PWM lookup table for mach-smartq
ARM: S3C64XX: Use PWM lookup table for mach-hmt
ARM: S3C64XX: Use PWM lookup table for mach-crag6410
ARM: S3C64XX: Use PWM lookup table for smdk6410
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Olof Johansson:
"Again we have a sizable (but not huge) cleanup branch with a net delta
of about -3k lines.
Main contents here is:
- A bunch of development/cleanup of a few PXA boards
- Removal of bockw platforms on shmobile, since the platform has now
gone completely multiplatform. Whee!
- move of the 32kHz timer on OMAP to a proper timesource
- Misc cleanup of older OMAP material (incl removal of one board
file)
- Switch over to new common PWM lookup support for several platforms
There's also a handful of other cleanups across the tree, but the
above are the major pieces"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (103 commits)
ARM: OMAP3: hwmod data: Remove legacy mailbox data and addrs
ARM: DRA7: hwmod data: Remove spinlock hwmod addrs
ARM: OMAP4: hwmod data: Remove spinlock hwmod addrs
ARM: DRA7/AM335x/AM437x: hwmod: Remove gpmc address space from hwmod data
ARM: Remove __ref on hotplug cpu die path
ARM: Remove open-coded version of IRQCHIP_DECLARE
arm: omap2: board-generic: use omap4_local_timer_init for AM437x
ARM: DRA7/AM335x/AM437x: hwmod: Remove elm address space from hwmod data
ARM: OMAP: Remove duplicated operand in OR operation
clocksource: ti-32k: make it depend on GENERIC_CLOCKSOURCE
ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
ARM: pxa: raumfeld: make some variables static
ARM: OMAP: Change all cpu_is_* occurences to soc_is_* for id.c
ARM: OMAP2+: Rename cpu_is macros to soc_is
arm: omap2: timer: limit hwmod usage to non-DT boots
arm: omap2+: select 32k clocksource driver
clocksource: add TI 32.768 Hz counter driver
arm: omap2: timer: rename omap_sync32k_timer_init()
arm: omap2: timer: always call clocksource_of_init() when DT
arm: omap2: timer: move realtime_counter_init() around
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC non-urgent fixes from Olof Johansson:
"A handful of fixes that came in and didn't seem warranted to go in
through the 4.3-rc cycle.
- MAINTAINERS updates for one of the Broadcom platforms and lpc18xx
- A couple of non-critical Davinci bugfixes
- A fix to reset irq affinity for TI platforms (silences a warning at
reboot)"
* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: update lpc18xx entry with more drivers
soc: ti: reset irq affinity before freeing irq
ARM: cns3xxx: pci: avoid potential stack overflow
ARM: davinci: clock: Correct return values for API functions
ARM: davinci: re-use %*ph specifier
MAINTAINERS: add entry for the Broadcom Northstar Plus SoCs
|
|
In commit a1c34a3bf00a ("mm: Don't offset memmap for flatmem") Laura
fixed a problem for Srinivas relating to the bottom 2MB of RAM on an ARM
IFC6410 board.
One small wrinkle on ia64 is that it allocates the node_mem_map earlier
in arch code, so it skips the block of code where "offset" is
initialized.
Move initialization of start and offset before the check for the
node_mem_map so that they will always be available in the latter part of
the function.
Tested-by: Laura Abbott <laura@labbott.name>
Fixes: a1c34a3bf00a (mm: Don't offset memmap for flatmem)
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 34c2d9fb0498c066afbe610b15e18995fd8be792.
There are 2 reasons for this revert:
1) The commit in question doesn't do what it says it does. The
description reads: "Allow bridge forward delay to be configured
when Spanning Tree is enabled." This was already the case before
the commit was made. What the commit actually do was disallow
invalid values or 'forward_delay' when STP was turned off.
2) The above change was actually a change in the user observed
behavior and broke things like libvirt and other network configs
that set 'forward_delay' to 0 without enabling STP. The value
of 0 is actually used when STP is turned off to immediately mark
the bridge as forwarding.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Arnd Bergmann reported:
In my ARM randconfig tests, I'm getting a build error for
newly added code in bpf_perf_event_read and bpf_perf_event_output
whenever CONFIG_PERF_EVENTS is disabled:
kernel/trace/bpf_trace.c: In function 'bpf_perf_event_read':
kernel/trace/bpf_trace.c:203:11: error: 'struct perf_event' has no member named 'oncpu'
if (event->oncpu != smp_processor_id() ||
^
kernel/trace/bpf_trace.c:204:11: error: 'struct perf_event' has no member named 'pmu'
event->pmu->count)
This can happen when UPROBE_EVENT is enabled but KPROBE_EVENT
is disabled. I'm not sure if that is a configuration we care
about, otherwise we could prevent this case from occuring by
adding Kconfig dependencies.
Looking at this further, it's really that UPROBE_EVENT enables PERF_EVENTS.
By just having BPF_EVENTS depend on PERF_EVENTS, then all is fine.
Link: http://lkml.kernel.org/r/4525348.Aq9YoXkChv@wuerfel
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The newly added qlogic qed driver uses the zlib library, but
misses the dependency:
drivers/built-in.o: In function `qed_alloc_stream_mem':
drivers/net/ethernet/qlogic/qed/qed_main.c:707: undefined reference to `zlib_inflate_workspacesize'
drivers/built-in.o: In function `qed_unzip_data':
drivers/net/ethernet/qlogic/qed/qed_main.c:675: undefined reference to `zlib_inflateInit2'
This changes Kconfig to always select zlib when needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull config fix for md from Neil Brown:
"New config dependency needed as md/raid5 now uses crc32c"
* tag 'md/4.4-rc0-fix' of git://neil.brown.name/md:
raid5-cache: add crc32c Kconfig dependency
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Outside of the new ACPI-NFIT hot-add support this pull request is more
notable for what it does not contain, than what it does. There were a
handful of development topics this cycle, dax get_user_pages, dax
fsync, and raw block dax, that need more more iteration and will wait
for 4.5.
The patches to make devm and the pmem driver NUMA aware have been in
-next for several weeks. The hot-add support has not, but is
contained to the NFIT driver and is passing unit tests. The coredump
support is straightforward and was looked over by Jeff. All of it has
received a 0day build success notification across 107 configs.
Summary:
- Add support for the ACPI 6.0 NFIT hot add mechanism to process
updates of the NFIT at runtime.
- Teach the coredump implementation how to filter out DAX mappings.
- Introduce NUMA hints for allocations made by the pmem driver, and
as a side effect all devm allocations now hint their NUMA node by
default"
* tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
coredump: add DAX filtering for FDPIC ELF coredumps
coredump: add DAX filtering for ELF coredumps
acpi: nfit: Add support for hot-add
nfit: in acpi_nfit_init, break on a 0-length table
pmem, memremap: convert to numa aware allocations
devm_memremap_pages: use numa_mem_id
devm: make allocations numa aware by default
devm_memremap: convert to return ERR_PTR
devm_memunmap: use devres_release()
pmem: kill memremap_pmem()
x86, mm: quiet arch_add_memory()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- New drivers: UniPhier (with and without FIFO)
- some drivers got some bigger rework: ismt, designware, img-scb (rcar
had to be reverted because issues were showing up just lately)
- ACPI: reworked the device scanning and added support for muxes
... and quite a lot of driver bugfixes and cleanups this time. All
files touched outside of the i2c realm have proper acks.
* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
i2c: rcar: Revert the latest refactoring series
i2c: pnx: remove superfluous assignment
MAINTAINERS: i2c: drop i2c-pnx maintainer
MAINTAINERS: i2c: mark also subdirectories as maintained
i2c: cadence: enable driver for ARM64
i2c: i801: Document Intel DNV and Broxton
i2c: at91: manage unexpected RXRDY flag when starting a transfer
i2c: pnx: Use setup_timer instead of open coding it
i2c: add ACPI support for I2C mux ports
acpi: add acpi_preset_companion() stub
i2c: pxa: Add support for pxa910/988 & new configuration features
i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
i2c-dev: Fix I2C_SLAVE ioctl comment
i2c-dev: Fix typo in ioctl name reference
i2c: sirf: tune the divider to make i2c bus freq more accurate
i2c: imx: Use -ENXIO as error in the NACK case
i2c: i801: Add support for Intel Broxton
i2c: i801: Add support for Intel DNV
i2c: mediatek: add i2c resume support
i2c: imx: implement bus recovery
...
|
|
Pull watchdog update from Wim Van Sebroeck:
- New driver for Broadcom 7038 Set-Top Box
- imx2_wdt: Use register definition in regmap_write()
- intel-mid: add Magic Closure flag
- watchdog framework improvements:
- Use device tree alias for naming watchdogs
- propagate ping error code to the user space
- Always evaluate new timeout against min_timeout
- Use single variable name for struct watchdog_device
- include clean-ups
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: include: add units for timeout values in kerneldoc
watchdog: include: fix some typos
watchdog: core: propagate ping error code to the user space
watchdog: watchdog_dev: Use single variable name for struct watchdog_device
watchdog: Always evaluate new timeout against min_timeout
watchdog: intel-mid: add Magic Closure flag
watchdog: imx2_wdt: Use register definition in regmap_write()
watchdog: watchdog_dev: Use device tree alias for naming watchdogs
watchdog: Watchdog driver for Broadcom Set-Top Box
watchdog: bcm7038: add device tree binding documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull tiny hwmon update from Jean Delvare.
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (k10temp) Remove duplicate pci-id define
|
|
Pull NTB bugfixes from Jon Mason:
"NTB Bug fixes for potential NULL pointer accesses, accesses of a freed
pointer, invalid buffer pointer, and a compiler warning.
Also, unification of upstream/downstream addresses"
* tag 'ntb-4.4' of git://github.com/jonmason/ntb:
NTB: fix 32-bit compiler warning
NTB: unify translation addresses
NTB: invalid buf pointer in multi-MW setups
NTB: remove unused variable
NTB: fix access of free-ed pointer
NTB: Fix issue where we may be accessing NULL ptr
|
|
Pull dmaengine updates from Vinod Koul:
"This time we have a very typical update which is mostly fixes and
updates to drivers and no new drivers.
- the biggest change is coming from Peter for edma cleanup which even
caused some last minute regression, things seem settled now
- idma64 and dw updates
- iotdma updates
- module autoload fixes for various drivers
- scatter gather support for hdmac"
* tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (77 commits)
dmaengine: edma: Add dummy driver skeleton for edma3-tptc
Revert "ARM: DTS: am33xx: Use the new DT bindings for the eDMA3"
Revert "ARM: DTS: am437x: Use the new DT bindings for the eDMA3"
dmaengine: dw: some Intel devices has no memcpy support
dmaengine: dw: platform: provide platform data for Intel
dmaengine: dw: don't override platform data with autocfg
dmaengine: hdmac: Add scatter-gathered memset support
dmaengine: hdmac: factorise memset descriptor allocation
dmaengine: virt-dma: Fix kernel-doc annotations
ARM: DTS: am437x: Use the new DT bindings for the eDMA3
ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
dmaengine: edma: New device tree binding
dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP
dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx
dmaengine: edma: Merge the of parsing functions
dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot
dmaengine: edma: Refactor the dma device and channel struct initialization
dmaengine: edma: Get qDMA channel information from HW also
dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq
dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Core:
- Fix rtctest error path
New drivers:
- Microcrystal RV8803
Subsystem wide cleanups:
- remove misuse of IRQF_NO_SUSPEND flag
Drivers:
- at91rm9200: clear RTC alarm status flag prior to suspending
- davinci: remove incorrect reference to probe function
- ds1307: Fix alarm programming for mcp794xx
- ds1390: trickle charger support, fix ds1390_get_reg
- isl1208: Pass the IRQF_ONESHOT flag
- opal: fix type of token
- pcf2127: fix RTC_READ_VL, remove useless driver version
- pcf85063: return an error when date is invalid
- pcf8563: add CLKOUT to common clock framework
- rx8025: remove unnecessary braces
- s3c: Set year, month, day value for setting alarm
- stmp3xxx: unify register access macros
- License fixes: pcf2127, da9063
- wakeup-source support for isl12057 and opal"
* tag 'rtc-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (23 commits)
rtc: Add a driver for Micro Crystal RV8803
rtc: s3c: Set year, month, day value for setting alarm
rtc: ds1307: Fix alarm programming for mcp794xx
rtc: isl12057: enable support for the standard "wakeup-source" property
rtc: opal: enable support for the stardard "wakeup-source" property
rtc: isl1208: Pass the IRQF_ONESHOT flag
rtc: pcf8563: add CLKOUT to common clock framework
rtc: davinci: remove incorrect reference to probe function
rtc: at91rm9200: clear RTC alarm status flag prior to suspending
rtc: pcf2127: remove useless driver version
rtc: pcf2127: fix reading uninitialized value on RTC_READ_VL ioctl
rtc: stmp3xxx: unify register access macros
rtc: da9063: GPL copyright inconsistency fix
rtc: pcf85063: return an error when date is invalid
rtc: rx8025: remove unnecessary braces
rtc: ds1343: remove misuse of IRQF_NO_SUSPEND flag
rtc: ab8500: remove misuse of IRQF_NO_SUSPEND flag
rtc: pl031: remove misuse of IRQF_NO_SUSPEND flag
rtc: opal: fix type of token
rtc: ds1390: Add trickle charger device tree binding
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev updates from Tomi Valkeinen:
- omap: fix hdmi audio configuration issue
- ssd1307fb: add ssd1309 support
- tridentfb: support DDC
- gxt4500: enable support for non-PPC platforms
* tag 'fbdev-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
radeonfb: Deinline large functions
gxt4500: enable panning
gxt4500: Use arch_phys_wc_* for framebuffer
gxt4500: fix color order
gxt4500: fix 16bpp 565 mode
gxt4500: enable on non-PPC architectures
tridentfb: Add DDC support
fb_ddc: Allow I2C adapters without SCL read capability
fbdev: ssd1307fb: add ssd1309 support
fbdev: ssd1307fb: alphabetize headers
video/omap: remove invalid check
OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled
|
|
Pull drm updates from Dave Airlie:
"I Was Almost Tempted To Capitalise Every Word, but then I decided I
couldn't read it myself!
I've also got one pull request for the sti driver outstanding. It
relied on a commit in Greg's tree and I didn't find out in time, that
commit is in your tree now so I might send that along once this is
merged.
I also had the accidental misfortune to have access to a Skylake on my
desk for a few days, and I've had to encourage Intel to try harder,
which seems to be happening now.
Here is the main drm-next pull request for 4.4.
Highlights:
New driver:
vc4 driver for the Rasberry Pi VPU.
(From Eric Anholt at Broadcom.)
Core:
Atomic fbdev support
Atomic helpers for runtime pm
dp/aux i2c STATUS_UPDATE handling
struct_mutex usage cleanups.
Generic of probing support.
Documentation:
Kerneldoc for VGA switcheroo code.
Rename to gpu instead of drm to reflect scope.
i915:
Skylake GuC firmware fixes
HPD A support
VBT backlight fallbacks
Fastboot by default for some systems
FBC work
BXT/SKL workarounds
Skylake deeper sleep state fixes
amdgpu:
Enable GPU scheduler by default
New atombios opcodes
GPUVM debugging options
Stoney support.
Fencing cleanups.
radeon:
More efficient CS checking
nouveau:
gk20a instance memory handling improvements.
Improved PGOB detection and GK107 support
Kepler GDDR5 PLL statbility improvement
G8x/GT2xx reclock improvements
new userspace API compatiblity fixes.
virtio-gpu:
Add 3D support - qemu 2.5 has it merged for it's gtk backend.
msm:
Initial msm88896 (snapdragon 8200)
exynos:
HDMI cleanups
Enable mixer driver byt default
Add DECON-TV support
vmwgfx:
Move to using memremap + fixes.
rcar-du:
Add support for R8A7793/4 DU
armada:
Remove support for non-component mode
Improved plane handling
Power savings while in DPMS off.
tda998x:
Remove unused slave encoder support
Use more HDMI helpers
Fix EDID read handling
dwhdmi:
Interlace video mode support for ipu-v3/dw_hdmi
Hotplug state fixes
Audio driver integration
imx:
More color formats support.
tegra:
Minor fixes/improvements"
[ Merge fixup: remove unused variable 'dev' that had all uses removed in
commit 4e270f088011: "drm/gem: Drop struct_mutex requirement from
drm_gem_mmap_obj" ]
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits)
drm/vmwgfx: Relax irq locking somewhat
drm/vmwgfx: Properly flush cursor updates and page-flips
drm/i915/skl: disable display side power well support for now
drm/i915: Extend DSL readout fix to BDW and SKL.
drm/i915: Do graphics device reset under forcewake
drm/i915: Skip fence installation for objects with rotated views (v4)
vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT
drm/amdgpu: group together common fence implementation
drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE
drm/amdgpu: remove now unused fence functions
drm/amdgpu: fix fence fallback check
drm/amdgpu: fix stoping the scheduler timeout
drm/amdgpu: cleanup on error in amdgpu_cs_ioctl()
drm/i915: Fix locking around GuC firmware load
drm/amdgpu: update Fiji's Golden setting
drm/amdgpu: update Fiji's rev id
drm/amdgpu: extract common code in vi_common_early_init
drm/amd/scheduler: don't oops on failure to load
drm/amdgpu: don't oops on failure to load (v2)
drm/amdgpu: don't VT switch on suspend
...
|
|
btrfs sets ->submit_io(), and we failed to set the block dev for
that path. That resulted in a potential NULL dereference when
we later wait for IO in dio_await_one().
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
This patch changes no code, it just fixes the whitespacing. Operators
should be separated from operands by a single space.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
For the npwm property the PWM sysfs interface already made use of the
DEVICE_ATTR_RO macro. This patch expands this to the other sysfs
properties so that the code base is concise and makes use of this
helpful macro.
This has the advantage of slightly reducing the code size, improving
readability and no longer using magic values for permissions.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Use the result of pwm_is_enabled() directly instead of storing it in a
temporary variable.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Use a PWM lookup table to provide the PWM to the pwm-backlight device.
The driver has a legacy code path that is required only because boards
still use the legacy method of requesting PWMs by global ID. Replacing
these usages allows that legacy fallback to be removed.
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The compatible should be "renesas,pwm-rcar", and one the the SoC
specific string. So, this patch revises the documentation.
Reported-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
When looking up a PWM using the lookup table, assume that all entries
will have been added already, so failure to find a match means that no
corresponding entry has been registered.
This fixes an issue where -EPROBE_DEFER would be returned if the PWM
lookup table is empty. After this fix, -EPROBE_DEFER is reserved for
situations where no provider has yet registered for a matching entry.
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The PWM controller on sun5i SoCs is identical to the one found on sun7i
SoCs. On the A13 package only one of the 2 pins is routed to the outside,
so only advertise one PWM channel there.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The pwm_enable() function didn't clear the enabled bit if a call to the
driver's ->enable() callback returned an error. The result was that the
state of the PWM core was wrong. Clearing the bit when enable returns
an error ensures the state is properly set.
Tested-by: Jonathan Richardson <jonathar@broadcom.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
[thierry.reding@gmail.com: add missing kerneldoc for the lock]
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Merge third patch-bomb from Andrew Morton:
"We're pretty much done over here - I'm still waiting for a nouveau
merge so I can cleanly finish up Christoph's dma-mapping rework.
- bunch of small misc stuff
- fold abs64() into abs(), remove abs64()
- new_valid_dev() cleanups
- binfmt_elf_fdpic feature work"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries
fs/stat.c: remove unnecessary new_valid_dev() check
fs/reiserfs/namei.c: remove unnecessary new_valid_dev() check
fs/nilfs2/namei.c: remove unnecessary new_valid_dev() check
fs/ncpfs/dir.c: remove unnecessary new_valid_dev() check
fs/jfs: remove unnecessary new_valid_dev() checks
fs/hpfs/namei.c: remove unnecessary new_valid_dev() check
fs/f2fs/namei.c: remove unnecessary new_valid_dev() check
fs/ext2/namei.c: remove unnecessary new_valid_dev() check
fs/exofs/namei.c: remove unnecessary new_valid_dev() check
fs/btrfs/inode.c: remove unnecessary new_valid_dev() check
fs/9p: remove unnecessary new_valid_dev() checks
include/linux/kdev_t.h: old/new_valid_dev() can return bool
include/linux/kdev_t.h: remove unused huge_valid_dev()
kmap_atomic_to_page() has no users, remove it
drivers/scsi/cxgbi: fix build with EXTRA_CFLAGS
dma: remove external references to dma_supported
Documentation/sysctl/vm.txt: fix misleading code reference of overcommit_memory
remove abs64()
kernel.h: make abs() work with 64-bit types
...
|
|
Only cpu seeing dst refcount going to 0 can safely
dereference dst->flags.
Otherwise an other cpu might already have freed the dst.
Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst")
Reported-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After changing an interface's MTU, then bringing the interface down and
back up again, I immediately saw tons of kernel messages like below.
The reason for this bad behavior is mvneta_rxq_drop_pkts(), which calls
dma_unmap_single() on already-freed memory. So we need to switch the
order of those two operations.
[ 152.388518] BUG: Bad page state in process ifconfig pfn:1b518
[ 152.388526] page:dff3dbc0 count:0 mapcount:0 mapping: (null) index:0x0
[ 152.395178] flags: 0x200(arch_1)
[ 152.398441] page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
[ 152.398446] bad because of flags:
[ 152.398450] flags: 0x200(arch_1)
[ 152.401716] Modules linked in:
[ 152.401728] CPU: 0 PID: 1453 Comm: ifconfig Tainted: P B O 4.1.12.armada.1 #1
[ 152.401733] Hardware name: Marvell Armada 370/XP (Device Tree)
[ 152.401749] [<c0015b1c>] (unwind_backtrace) from [<c0011d8c>] (show_stack+0x10/0x14)
[ 152.401762] [<c0011d8c>] (show_stack) from [<c06aa68c>] (dump_stack+0x74/0x90)
[ 152.401772] [<c06aa68c>] (dump_stack) from [<c0096c08>] (bad_page+0xc4/0x124)
[ 152.401783] [<c0096c08>] (bad_page) from [<c0099378>] (get_page_from_freelist+0x4e4/0x644)
[ 152.401794] [<c0099378>] (get_page_from_freelist) from [<c0099620>] (__alloc_pages_nodemask+0x148/0x784)
[ 152.401805] [<c0099620>] (__alloc_pages_nodemask) from [<c00ac658>] (kmalloc_order+0x10/0x20)
[ 152.401818] [<c00ac658>] (kmalloc_order) from [<c04c6f44>] (mvneta_rx_refill+0xc4/0xe8)
[ 152.401830] [<c04c6f44>] (mvneta_rx_refill) from [<c04c96c0>] (mvneta_setup_rxqs+0x298/0x39c)
[ 152.401842] [<c04c96c0>] (mvneta_setup_rxqs) from [<c04c9904>] (mvneta_open+0x3c/0x150)
[ 152.401853] [<c04c9904>] (mvneta_open) from [<c0597764>] (__dev_open+0xac/0x124)
[ 152.401864] [<c0597764>] (__dev_open) from [<c05979e4>] (__dev_change_flags+0x8c/0x148)
[ 152.401875] [<c05979e4>] (__dev_change_flags) from [<c0597ac0>] (dev_change_flags+0x18/0x48)
[ 152.401886] [<c0597ac0>] (dev_change_flags) from [<c060d308>] (devinet_ioctl+0x620/0x6d0)
[ 152.401897] [<c060d308>] (devinet_ioctl) from [<c057d810>] (sock_ioctl+0x64/0x288)
[ 152.401908] [<c057d810>] (sock_ioctl) from [<c00dcb7c>] (do_vfs_ioctl+0x78/0x608)
[ 152.401918] [<c00dcb7c>] (do_vfs_ioctl) from [<c00dd170>] (SyS_ioctl+0x64/0x74)
[ 152.401930] [<c00dd170>] (SyS_ioctl) from [<c000f3a0>] (ret_fast_syscall+0x0/0x3c)
Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
New features:
- RDMA client backchannel from Chuck
- Support for NFSv4.2 file CLONE using the btrfs ioctl
Bugfixes + cleanups:
- Move socket data receive out of the bottom halves and into a
workqueue
- Refactor NFSv4 error handling so synchronous and asynchronous RPC
handles errors identically.
- Fix a panic when blocks or object layouts reads return a bad data
length
- Fix nfsroot so it can handle a 1024 byte long path.
- Fix bad usage of page offset in bl_read_pagelist
- Various NFSv4 callback cleanups+fixes
- Fix GETATTR bitmap verification
- Support hexadecimal number for sunrpc debug sysctl files"
* tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (53 commits)
Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug
nfs: Fix GETATTR bitmap verification
nfs: Remove unused xdr page offsets in getacl/setacl arguments
fs/nfs: remove unnecessary new_valid_dev check
SUNRPC: fix variable type
NFS: Enable client side NFSv4.1 backchannel to use other transports
pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDS
pNFS/flexfiles: When mirrored, retry failed reads by switching mirrors
SUNRPC: Remove the TCP-only restriction in bc_svc_process()
svcrdma: Add backward direction service for RPC/RDMA transport
xprtrdma: Handle incoming backward direction RPC calls
xprtrdma: Add support for sending backward direction RPC replies
xprtrdma: Pre-allocate Work Requests for backchannel
xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers
SUNRPC: Abstract backchannel operations
xprtrdma: Saving IRQs no longer needed for rb_lock
xprtrdma: Remove reply tasklet
xprtrdma: Use workqueue to process RPC/RDMA replies
xprtrdma: Replace send and receive arrays
xprtrdma: Refactor reply handler error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Bob Peterson:
"Here is a list of patches we've accumulated for GFS2 for the current
upstream merge window. There are only six patches this time:
1. A cleanup patch from Andreas to remove the gl_spin #define in favor
of its value for the sake of clarity.
2. A fix from Andy Price to mark the inode dirty during fallocate.
3. A fix from Andy Price to set s_mode on mount failures to prevent a
stack trace.
4 A patch from me to prevent a kernel BUG() in trans_add_meta/trans_add_data
due to uninitialized storage.
5. A patch from me to protecting our freeing of the in-core directory
hash table to prevent double-free.
6. A fix for a page/block rounding problem that resulted in a metadata
coherency problem when the block size != page size"
I've got a lot more patches in various stages of review and testing,
but I'm afraid they'll have to wait until the next merge window. So
next time we're likely to have a lot more"
* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
GFS2: Fix rgrp end rounding problem for bsize < page size
GFS2: Protect freeing directory hash table with i_lock spin_lock
gfs2: Remove gl_spin define
gfs2: Add missing else in trans_add_meta/data
GFS2: Set s_mode before parsing mount options
GFS2: fallocate: do not rely on file_update_time to mark the inode dirty
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 fix from Jan Kara:
"Fix for DAX on ext2"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Add locking for DAX faults
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"We have two patches in here:
- The parisc uapi headers have been screwed up since quite some time.
This patch fixes some bugs (e.g. endianess not respected in
compat_semid64_ds) and cleans them up (e.g. uid_t was used instead
of __kernel_uid_t) so that they can be used by userspace again.
This patch has been reviewed by Arnd Bergmann and is scheduled for
stable kernel series.
- Drop the hpux_stat64 struct from stat.h, we do not support HP-UX
binaries since kernel 4.0"
* 'parisc-4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fixes and cleanups in kernel uapi header files
parisc: Drop hpux_stat64 struct from stat.h header file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2
Pull nios2 updates from Ley Foon Tan:
- nios2: Remove unnecessary #ifdef guards
- nios2: Switch to generic __xchg()
- nios2: Fix unused variable warning
* tag 'nios2-v4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: Remove unnecessary #ifdef guards
nios2: Switch to generic __xchg()
nios2: Fix unused variable warning
|
|
Merging in the few patches I had kept separate from main next/dt, since others
got merged here directly.
* next/arm64:
arm64: defconfig: Enable PCI generic host bridge by default
arm64: Juno: Add support for the PCIe host bridge on Juno R1
Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
arm64: dts: mt8173: Add clocks for SCPSYS unit
arm64: dts: mt8173: Add subsystem clock controller device nodes
+ Linux 4.3-rc5
|
|
Pull xtensa updates from Chris Zankel:
- fix remaining issues with noMMU cores
- fix build for cores w/o cache or zero overhead loop options
- fix boot of secondary cores in SMP configuration
- add support for DMA to high memory pages
- add dma_to_phys and phys_to_dma functions.
* tag 'xtensa-20151108' of git://github.com/czankel/xtensa-linux:
xtensa: implement dma_to_phys and phys_to_dma
xtensa: support DMA to high memory
Revert "xtensa: cache inquiry and unaligned cache handling functions"
xtensa: drop unused sections and remapped reset handlers
xtensa: fix secondary core boot in SMP
xtensa: add FORCE_MAX_ZONEORDER to Kconfig
xtensa: nommu: provide defconfig for de212 on kc705
xtensa: nommu: xtfpga: add kc705 DTS
xtensa: add de212 core variant
xtensa: nommu: select HAVE_FUTEX_CMPXCHG
xtensa: nommu: fix default memory start address
xtensa: nommu: provide correct KIO addresses
xtensa: nommu: fix USER_RING definition
xtensa: xtfpga: fix integer overflow in TASK_SIZE
xtensa: fix build for configs without cache options
xtensa: fixes for configs without loop option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu/coldfire fix from Greg Ungerer:
"Only a single patch, fixes brk area setup problem in nommu
environments"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
fs/binfmt_elf_fdpic.c: fix brk area overlap with stack on NOMMU
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Nothing exciting, minor tweaks and cleanups"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
scripts: [modpost] add new sections to white list
modpost: Add flag -E for making section mismatches fatal
params: don't ignore the rest of cmdline if parse_one() fails
modpost: abort if a module symbol is too long
|
|
The ELF binary loader in binfmt_elf.c requires an MMU, making it
impossible to use regular ELF binaries on NOMMU archs. However, the FDPIC
ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain
ELF, which requires constant displacements between LOAD segments, since it
already supports FDPIC ELF files flagged as needing constant displacement.
This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on
NOMMU archs. They are treated identically to FDPIC ELF files with the
constant-displacement flag bit set, except for personality, which must
match the ABI of the program being loaded; the PER_LINUX_FDPIC personality
controls how the kernel interprets function pointers passed to sigaction.
Files that do not set a stack size requirement explicitly are given a
default stack size (matching the amount of committed stack the normal ELF
loader for MMU archs would give them) rather than being rejected; this is
necessary because plain ELF files generally do not declare stack
requirements in theit program headers.
Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed
virtual address is not possible on NOMMU.
This patch was developed and tested on J2 (SH2-compatible) but should
be usable immediately on all archs where binfmt_elf_fdpic is
available. Moreover, by providing dummy definitions of the
elf_check_fdpic() and elf_check_const_displacement() macros for archs
which lack an FDPIC ABI, it should be possible to enable building of
binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF
binary support, but I have not yet tested this.
The motivation for using binfmt_elf_fdpic.c rather than adapting
binfmt_elf.c to NOMMU is that the former already has all the necessary
code to work properly on NOMMU and has already received widespread
real-world use and testing. I hope this is not controversial.
I'm not really happy with having to unset the FDPIC_FUNCPTRS
personality bit when loading non-FDPIC ELF. This bit should really
reset automatically on execve, since otherwise, executing non-ELF
binaries (e.g. bFLT) from an FDPIC process will leave the personality
in the wrong state and severely break signal handling. But that's a
separate, existing bug and I don't know the right place to fix it.
Signed-off-by: Rich Felker <dalias@libc.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Oleg Endo <oleg.endo@t-online.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() checks are not
needed. Remove them.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Changman Lee <cm224.lee@samsung.com>
Cc: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Boaz Harrosh <ooo@electrozaur.com>
Cc: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed. Remove it.
Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
