summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-26perf kwork: Implement 'report' subcommandYang Jihong
Implements framework of 'perf kwork report', which is used to report time properties such as run time and frequency: Test cases: # perf kwork Usage: perf kwork [<options>] {record|report} -D, --dump-raw-trace dump raw trace in ASCII -f, --force don't complain, do it -k, --kwork <kwork> list of kwork to profile (irq, softirq, workqueue, etc) -v, --verbose be more verbose (show symbol address, etc) # perf kwork report -h Usage: perf kwork report [<options>] -C, --cpu <cpu> list of cpus to profile -i, --input <file> input file name -n, --name <name> event name to profile -s, --sort <key[,key2...]> sort by key(s): runtime, max, count -S, --with-summary Show summary with statistics --time <str> Time span for analysis (start,stop) # perf kwork report Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end | -------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------- # perf kwork report -S Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end | -------------------------------------------------------------------------------------------------------------------------------- -------------------------------------------------------------------------------------------------------------------------------- Total count : 0 Total runtime (msec) : 0.000 (0.000% load average) Total time span (msec) : 0.000 -------------------------------------------------------------------------------------------------------------------------------- # perf kwork report -C 0,100 Requested CPU 100 too large. Consider raising MAX_NR_CPUS Invalid cpu bitmap # perf kwork report -s runtime1 Error: Unknown --sort key: `runtime1' Usage: perf kwork report [<options>] -C, --cpu <cpu> list of cpus to profile -i, --input <file> input file name -n, --name <name> event name to profile -s, --sort <key[,key2...]> sort by key(s): runtime, max, count -S, --with-summary Show summary with statistics --time <str> Time span for analysis (start,stop) # perf kwork report -i perf_no_exist.data failed to open perf_no_exist.data: No such file or directory # perf kwork report --time 00FFF, Invalid time span Since there are no report supported events, the output is empty. Briefly describe the data structure: 1. "class" indicates event type. For example, irq and softiq correspond to different types. 2. "cluster" refers to a specific event corresponding to a type. For example, RCU and TIMER in softirq correspond to different clusters, which contains three types of events: raise, entry, and exit. 3. "atom" includes time of each sample and sample of the previous phase. (For example, exit corresponds to entry, which is used for timehist.) Committer notes: - Add {} for multiline if blocks. - report_print_work() should either return that ret variable that accounts how many bytes were printed or stop accounting and be void. Do the former for now to avoid this: builtin-kwork.c:534:6: error: variable 'ret' set but not used [-Werror,-Wunused-but-set-variable] int ret = 0; ^ 1 error generated. When building with: ⬢[acme@toolbox perf]$ clang --version clang version 13.0.0 (https://github.com/llvm/llvm-project e8991caea8690ec2d17b0b7e1c29bf0da6609076) Also: - if ((dst_type >= 0) && (dst_type < KWORK_TRACE_MAX)) { + if (dst_type < KWORK_TRACE_MAX) { Several versions of clang and at least this gcc: 3 51.40 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0) builtin-kwork.c:411:16: error: comparison of unsigned enum expression >= 0 is always true [-Werror,-Wtautological-compare] if ((dst_type >= 0) && (dst_type < KWORK_TRACE_MAX)) { As the first entry in a enum is zero. Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220709015033.38326-7-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-26cxl/region: Introduce cxl_pmem_region objectsDan Williams
The LIBNVDIMM subsystem is a platform agnostic representation of system NVDIMM / persistent memory resources. To date, the CXL subsystem's interaction with LIBNVDIMM has been to register an nvdimm-bridge device and cxl_nvdimm objects to proxy CXL capabilities into existing LIBNVDIMM subsystem mechanics. With regions the approach is the same. Create a new cxl_pmem_region object to proxy CXL region details into a LIBNVDIMM definition. With this enabling LIBNVDIMM can partition CXL persistent memory regions with legacy namespace labels. A follow-on patch will add CXL region label and CXL namespace label support to persist region configurations across driver reload / system-reset events. Co-developed-by: Ben Widawsky <bwidawsk@kernel.org> Signed-off-by: Ben Widawsky <bwidawsk@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165784340111.1758207.3036498385188290968.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-26cxl/pmem: Fix offline_nvdimm_bus() to offline by bridgeDan Williams
Be careful to only disable cxl_pmem objects related to a given cxl_nvdimm_bridge. Otherwise, offline_nvdimm_bus() reaches across CXL domains and disables more than is expected. Fixes: 21083f51521f ("cxl/pmem: Register 'pmem' / cxl_nvdimm devices") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165784339569.1758207.1557084545278004577.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-26cxl/region: Add region driver boiler plateDan Williams
The CXL region driver is responsible for routing fully formed CXL regions to one of libnvdimm, for persistent memory regions, device-dax for volatile memory regions, or just act as an enumeration placeholder if the region was setup and configuration locked by platform firmware. In the platform-firmware-setup case the expectation is that region is already accounted in the system memory map, i.e. already enabled as "System RAM". For now, just attach to CXL regions in the CXL_CONFIG_COMMIT state, and take no further action. Given this driver is just a small / simple router, include it in the core rather than its own module. Co-developed-by: Ben Widawsky <bwidawsk@kernel.org> Signed-off-by: Ben Widawsky <bwidawsk@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20220624041950.559155-18-dan.j.williams@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2022-07-26netfilter: nft_queue: only allow supported familes and hooksFlorian Westphal
Trying to use 'queue' statement in ingress (for example) triggers a splat on reinject: WARNING: CPU: 3 PID: 1345 at net/netfilter/nf_queue.c:291 ... because nf_reinject cannot find the ruleset head. The netdev family doesn't support async resume at the moment anyway, so disallow loading such rulesets with a more appropriate error message. v2: add 'validate' callback and also check hook points, v1 did allow ingress use in 'table inet', but that doesn't work either. (Pablo) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-26netfilter: nf_tables: add rescheduling points during loop detection walksFlorian Westphal
Add explicit rescheduling points during ruleset walk. Switching to a faster algorithm is possible but this is a much smaller change, suitable for nf tree. Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1460 Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-26netfilter: nf_queue: do not allow packet truncation below transport header ↵Florian Westphal
offset Domingo Dirutigliano and Nicola Guerrera report kernel panic when sending nf_queue verdict with 1-byte nfta_payload attribute. The IP/IPv6 stack pulls the IP(v6) header from the packet after the input hook. If user truncates the packet below the header size, this skb_pull() will result in a malformed skb (skb->len < 0). Fixes: 7af4cc3fa158 ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink") Reported-by: Domingo Dirutigliano <pwnzer0tt1@proton.me> Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-07-26x86/cyrix: include header linux/isa-dma.hRandy Dunlap
x86/kernel/cpu/cyrix.c now needs to include <linux/isa-dma.h> since the 'isa_dma_bridge_buggy' variable was moved to it. Fixes this build error: ../arch/x86/kernel/cpu/cyrix.c: In function ‘init_cyrix’: ../arch/x86/kernel/cpu/cyrix.c:277:17: error: ‘isa_dma_bridge_buggy’ undeclared (first use in this function) 277 | isa_dma_bridge_buggy = 2; Fixes: abb4970ac335 ("PCI: Move isa_dma_bridge_buggy out of asm/dma.h") Link: https://lore.kernel.org/r/20220725202224.29269-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Stafford Horne <shorne@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: x86@kernel.org
2022-07-26tools lib: Add list_last_entry_or_null()Yang Jihong
Add list_last_entry_or_null() to get the last element from a list, returns NULL if the list is empty. Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220709015033.38326-6-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-26perf kwork: Add workqueue kwork record supportYang Jihong
Record workqueue events workqueue:workqueue_activate_work, workqueue:workqueue_execute_start & workqueue:workqueue_execute_end Tese cases: Record all events: # perf kwork record -o perf_kwork.date -- sleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 0.857 MB perf_kwork.date ] # # perf evlist -i perf_kwork.date irq:irq_handler_entry irq:irq_handler_exit irq:softirq_raise irq:softirq_entry irq:softirq_exit workqueue:workqueue_activate_work workqueue:workqueue_execute_start workqueue:workqueue_execute_end dummy:HG # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Record workqueue events: # perf kwork -k workqueue record -o perf_kwork.date -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.081 MB perf_kwork.date ] # # perf evlist -i perf_kwork.date workqueue:workqueue_activate_work workqueue:workqueue_execute_start workqueue:workqueue_execute_end dummy:HG # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Committer testing: # perf kwork record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 3.430 MB perf.data (24130 samples) ] # perf evlist -v irq:irq_handler_entry: type: 2, size: 128, config: 0x97, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:irq_handler_exit: type: 2, size: 128, config: 0x96, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:softirq_raise: type: 2, size: 128, config: 0x93, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:softirq_entry: type: 2, size: 128, config: 0x95, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:softirq_exit: type: 2, size: 128, config: 0x94, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 workqueue:workqueue_activate_work: type: 2, size: 128, config: 0x106, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 workqueue:workqueue_execute_start: type: 2, size: 128, config: 0x105, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 workqueue:workqueue_execute_end: type: 2, size: 128, config: 0x104, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 dummy:HG: type: 1, size: 128, config: 0x9, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|RAW|IDENTIFIER, read_format: ID, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # perf script | grep workqueue | head swapper 0 [018] 26035.043289: workqueue:workqueue_activate_work: work struct 0xffff8b8ffeeae368 kworker/18:2-ev 70440 [018] 26035.043293: workqueue:workqueue_execute_start: work struct 0xffff8b8ffeeae368: function free_work kworker/18:2-ev 70440 [018] 26035.043301: workqueue:workqueue_execute_end: work struct 0xffff8b8ffeeae368: function free_work swapper 0 [021] 26035.044704: workqueue:workqueue_activate_work: work struct 0xffff8b8ffef6e368 kworker/21:0-ev 4080535 [021] 26035.044709: workqueue:workqueue_execute_start: work struct 0xffff8b8ffef6e368: function free_work kworker/21:0-ev 4080535 [021] 26035.044716: workqueue:workqueue_execute_end: work struct 0xffff8b8ffef6e368: function free_work swapper 0 [018] 26035.045230: workqueue:workqueue_activate_work: work struct 0xffff8b8ffeeae368 kworker/18:2-ev 70440 [018] 26035.045232: workqueue:workqueue_execute_start: work struct 0xffff8b8ffeeae368: function free_work kworker/18:2-ev 70440 [018] 26035.045235: workqueue:workqueue_execute_end: work struct 0xffff8b8ffeeae368: function free_work swapper 0 [001] 26035.052046: workqueue:workqueue_activate_work: work struct 0xffff8b8108901590 # Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220709015033.38326-5-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-26perf kwork: Add softirq kwork record supportYang Jihong
Record softirq events irq:softirq_raise, irq:softirq_entry & irq:softirq_exit. Test cases: Record all events: # perf kwork record -o perf_kwork.date -- sleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 0.897 MB perf_kwork.date ] # # perf evlist -i perf_kwork.date irq:irq_handler_entry irq:irq_handler_exit irq:softirq_raise irq:softirq_entry irq:softirq_exit dummy:HG # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Record softirq events: # perf kwork -k softirq record -o perf_kwork.date -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.141 MB perf_kwork.date ] # # perf evlist -i perf_kwork.date irq:softirq_raise irq:softirq_entry irq:softirq_exit dummy:HG # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Committer testing: # perf kwork record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 3.078 MB perf.data (17433 samples) ] # perf evlist -v irq:irq_handler_entry: type: 2, size: 128, config: 0x97, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:irq_handler_exit: type: 2, size: 128, config: 0x96, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:softirq_raise: type: 2, size: 128, config: 0x93, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:softirq_entry: type: 2, size: 128, config: 0x95, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 irq:softirq_exit: type: 2, size: 128, config: 0x94, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, sample_id_all: 1, exclude_guest: 1 dummy:HG: type: 1, size: 128, config: 0x9, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CPU|RAW|IDENTIFIER, read_format: ID, inherit: 1, mmap: 1, comm: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # perf script | head migration/12 73 [012] 25884.940992: irq:softirq_raise: vec=9 [action=RCU] migration/12 73 [012] 25884.940994: irq:softirq_entry: vec=9 [action=RCU] migration/12 73 [012] 25884.940995: irq:softirq_exit: vec=9 [action=RCU] swapper 0 [004] 25884.940995: irq:softirq_raise: vec=9 [action=RCU] swapper 0 [004] 25884.940998: irq:softirq_entry: vec=9 [action=RCU] swapper 0 [004] 25884.940999: irq:softirq_exit: vec=9 [action=RCU] cc1 71212 [021] 25884.941990: irq:softirq_raise: vec=9 [action=RCU] swapper 0 [004] 25884.941991: irq:softirq_raise: vec=9 [action=RCU] cc1 71212 [021] 25884.941992: irq:softirq_raise: vec=7 [action=SCHED] perf-exec 71208 [013] 25884.941992: irq:softirq_raise: vec=9 [action=RCU] # Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220709015033.38326-4-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-26perf kwork: Add irq kwork record supportYang Jihong
Record interrupt events irq:irq_handler_entry & irq_handler_exit Test cases: # perf kwork record -o perf_kwork.date -- sleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 0.556 MB perf_kwork.date ] # # perf evlist -i perf_kwork.date irq:irq_handler_entry irq:irq_handler_exit dummy:HG # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events # Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220709015033.38326-3-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-26perf kwork: New tool to trace time properties of kernel work (such as ↵Yang Jihong
softirq, and workqueue) The 'perf kwork' tool is used to trace time properties of kernel work (such as irq, softirq, and workqueue), including runtime, latency, and timehist, using the infrastructure in the perf tools to allow tracing extra targets. This is the first commit to reuse the 'perf record' framework code to implement a simple record function, kwork is not supported currently. Test cases: # perf usage: perf [--version] [--help] [OPTIONS] COMMAND [ARGS] The most commonly used perf commands are: <SNIP> iostat Show I/O performance metrics kallsyms Searches running kernel for symbols kmem Tool to trace/measure kernel memory properties kvm Tool to trace/measure kvm guest os kwork Tool to trace/measure kernel work properties (latencies) list List all symbolic event types lock Analyze lock events mem Profile memory accesses record Run a command and record its profile into perf.data <SNIP> See 'perf help COMMAND' for more information on a specific command. # perf kwork Usage: perf kwork [<options>] {record} -D, --dump-raw-trace dump raw trace in ASCII -f, --force don't complain, do it -k, --kwork <kwork> list of kwork to profile -v, --verbose be more verbose (show symbol address, etc) # perf kwork record -- sleep 1 [ perf record: Woken up 0 times to write data ] [ perf record: Captured and wrote 1.787 MB perf.data ] Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220709015033.38326-2-yangjihong1@huawei.com [ Add {} for multiline if blocks ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-07-26powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-PSumeet Pawnikar
Add Alder Lake-N and Raptor Lake-P to the list of processor models for which Power Limit4 is supported by the Intel RAPL driver. Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26ACPI: CPPC: Do not prevent CPPC from working in the futureRafael J. Wysocki
There is a problem with the current revision checks in is_cppc_supported() that they essentially prevent the CPPC support from working if a new _CPC package format revision being a proper superset of the v3 and only causing _CPC to return a package with more entries (while retaining the types and meaning of the entries defined by the v3) is introduced in the future and used by the platform firmware. In that case, as long as the number of entries in the _CPC return package is at least CPPC_V3_NUM_ENT, it should be perfectly fine to use the v3 support code and disregard the additional package entries added by the new package format revision. For this reason, drop is_cppc_supported() altogether, put the revision checks directly into acpi_cppc_processor_probe() so they are easier to follow and rework them to take the case mentioned above into account. Fixes: 4773e77cdc9b ("ACPI / CPPC: Add support for CPPC v3") Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26ACPI: PM: x86: Print messages regarding LPS0 idle supportRafael J. Wysocki
Because suspend-to-idle is always supported and on x86 it is the only way to suspend the system if S3 is not supported by the platform, the kernel attempts to enter low-power S0 idle in the suspend-to-idle flow regardless of whether or not the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT. However, if that flag is not set, residency counters associated with low-power S0 idle may not count and the platform may refuse to put the EC into a low-power mode, for example. For this reason, print diagnostic messages when the platform should achieve significant energy savings in low-power S0 idle (because the ACPI_FADT_LOW_POWER_S0 flag is set in the FADT) and when suspend-to-idle becomes the default suspend method (because low-power S0 idle should be equally or more efficient than S3, if available). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
2022-07-26PM: QoS: Add check to make sure CPU freq is non-negativeShivnandan Kumar
CPU frequency should never be negative. If some client driver calls freq_qos_update_request with a negative value which will be very high in absolute terms, then frequency QoS sets max CPU freq at fmax as it considers it's absolute value but it will add plist node with negative priority. plist node has priority from INT_MIN (highest) to INT_MAX(lowest). Once priority is set as negative, another client will not be able to reduce CPU frequency. Adding check to make sure CPU freq is non-negative will fix this problem. Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26PM: hibernate: defer device probing when resuming from hibernationTetsuo Handa
syzbot is reporting hung task at misc_open() [1], for there is a race window of AB-BA deadlock which involves probe_count variable. Currently wait_for_device_probe() from snapshot_open() from misc_open() can sleep forever with misc_mtx held if probe_count cannot become 0. When a device is probed by hub_event() work function, probe_count is incremented before the probe function starts, and probe_count is decremented after the probe function completed. There are three cases that can prevent probe_count from dropping to 0. (a) A device being probed stopped responding (i.e. broken/malicious hardware). (b) A process emulating a USB device using /dev/raw-gadget interface stopped responding for some reason. (c) New device probe requests keeps coming in before existing device probe requests complete. The phenomenon syzbot is reporting is (b). A process which is holding system_transition_mutex and misc_mtx is waiting for probe_count to become 0 inside wait_for_device_probe(), but the probe function which is called from hub_event() work function is waiting for the processes which are blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface. This patch mitigates (b) by deferring wait_for_device_probe() from snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that the possibility of (b) remains as long as any thread which is emulating a USB device via /dev/raw-gadget interface can be blocked by uninterruptible blocking operations (e.g. mutex_lock()). Please also note that (a) and (c) are not addressed. Regarding (c), we should change the code to wait for only one device which contains the image for resuming from hibernation. I don't know how to address (a), for use of timeout for wait_for_device_probe() might result in loss of user data in the image. Maybe we should require the userland to wait for the image device before opening /dev/snapshot interface. Link: https://syzkaller.appspot.com/bug?extid=358c9ab4c93da7b7238c [1] Reported-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-26ublk_drv: fix double shift bugDan Carpenter
The test/clear_bit() functions take a bit number, but this code is passing as shifted value. It's the equivalent of saying BIT(BIT(0)) instead of just BIT(0). This doesn't affect runtime because numbers are small and it's done consistently. Fixes: fa362045564e ("ublk: simplify ublk_ch_open and ublk_ch_release") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/Yt/2R/+MJf/MSoyl@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-26ice: Add support for PPPoE hardware offloadMarcin Szycik
Add support for creating PPPoE filters in switchdev mode. Add support for parsing PPPoE and PPP-specific tc options: pppoe_sid and ppp_proto. Example filter: tc filter add dev $PF1 ingress protocol ppp_ses prio 1 flower pppoe_sid \ 1234 ppp_proto ip skip_sw action mirred egress redirect dev $VF1_PR Changes in iproute2 are required to use the new fields. ICE COMMS DDP package is required to create a filter as it contains PPPoE profiles. Added a warning message when loaded DDP package does not contain required profiles. Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26flow_offload: Introduce flow_match_pppoeWojciech Drewek
Allow to offload PPPoE filters by adding flow_rule_match_pppoe. Drivers can extract PPPoE specific fields from now on. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26gpio: xilinx: add missing blank line after declarationsShubhrajyoti Datta
Add a missing blank line. No functional changes. WARNING: Missing a blank line after declarations 128: FILE: drivers/gpio/gpio-xilinx.c:120: + void __iomem *addr = chip->regs + reg + xgpio_regoffset(chip, bit / 32); + xgpio_set_value32(a, bit, xgpio_readreg(addr)); WARNING: Missing a blank line after declarations 136: FILE: drivers/gpio/gpio-xilinx.c:126: + void __iomem *addr = chip->regs + reg + xgpio_regoffset(chip, bit / 32); + xgpio_writereg(addr, xgpio_get_value32(a, bit)); Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-26net/sched: flower: Add PPPoE filterWojciech Drewek
Add support for PPPoE specific fields for tc-flower. Those fields can be provided only when protocol was set to ETH_P_PPP_SES. Defines, dump, load and set are being done here. Overwrite basic.n_proto only in case of PPP_IP and PPP_IPV6, otherwise leave it as ETH_P_PPP_SES. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26Merge tag 's390-5.19-7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fix from Alexander GordeevL - Prevent relatively slow PRNO TRNG random number operation from being called from interrupt context. That could for example cause some network loads to timeout. * tag 's390-5.19-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/archrandom: prevent CPACF trng invocations in interrupt context
2022-07-26flow_dissector: Add PPPoE dissectorsWojciech Drewek
Allow to dissect PPPoE specific fields which are: - session ID (16 bits) - ppp protocol (16 bits) - type (16 bits) - this is PPPoE ethertype, for now only ETH_P_PPP_SES is supported, possible ETH_P_PPP_DISC in the future The goal is to make the following TC command possible: # tc filter add dev ens6f0 ingress prio 1 protocol ppp_ses \ flower \ pppoe_sid 12 \ ppp_proto ip \ action drop Note that only PPPoE Session is supported. Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-26dmaengine: mediatek: mtk-hsdma: Fix typo 'the the' in commentSlark Xiao
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220721055647.46085-1-slark_xiao@163.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26dmaengine: axi-dmac: check cache coherency registerMathias Tausen
Marking the DMA as cache coherent (dma-coherent in devicetree) is only safe with versions of axi_dmac that have this feature enabled. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Vinod Koul <vkoul@kernel.org> Acked-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Mathias Tausen <mta@satlab.com> Link: https://lore.kernel.org/r/20220726140213.786939-1-mta@satlab.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2022-07-26mm: fix NULL pointer dereference in wp_page_reuse()Qi Zheng
The vmf->page can be NULL when the wp_page_reuse() is invoked by wp_pfn_shared(), it will cause the following panic: BUG: kernel NULL pointer dereference, address: 000000000000008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 18 PID: 923 Comm: Xorg Not tainted 5.19.0-rc8.bm.1-amd64 #263 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g14 RIP: 0010:_compound_head+0x0/0x40 [...] Call Trace: wp_page_reuse+0x1c/0xa0 do_wp_page+0x1a5/0x3f0 __handle_mm_fault+0x8cf/0xd20 handle_mm_fault+0xd5/0x2a0 do_user_addr_fault+0x1d0/0x680 exc_page_fault+0x78/0x170 asm_exc_page_fault+0x22/0x30 To fix it, this patch performs a NULL pointer check before dereferencing the vmf->page. Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-26ASoC: mediatek: mt8186: set the correct string to strncmp()Jiaxin Yu
Fix Smatch static checker warning. strncmp() here only needs to compare the first seven bytes, so in order to make the code more clear, only the first seven bytes of the string used as the comparison are reserved. Bug report: https://www.spinics.net/lists/alsa-devel/msg145608.html sound/soc/mediatek/mt8186/mt8186-dai-adda.c:78 get_adda_priv_by_name() warn: strncmp() with weird length: 17 vs 7 sound/soc/mediatek/mt8186/mt8186-dai-adda.c 72 static struct mtk_afe_adda_priv *get_adda_priv_by_name(struct mtk_base_afe *afe, 73 const char *name) 74 { 75 struct mt8186_afe_private *afe_priv = afe->platform_priv; 76 int dai_id; 77 --> 78 if (strncmp(name, "aud_dac_hires_clk", 7) == 0 || 79 strncmp(name, "aud_adc_hires_clk", 7) == 0) Fixes: b65c466220b3 ("ASoC: mediatek: mt8186: support adda in platform driver") Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Link: https://lore.kernel.org/r/20220726153130.27584-1-jiaxin.yu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-26spi: a3700: support BE for AC5 SPI driverNoam
Signed-off-by: Noam <lnoam@marvell.com> Tested-by: Raz Adashi <raza@marvell.com> Reviewed-by: Raz Adashi <raza@marvell.com> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Link: https://lore.kernel.org/r/20220726130038.20995-1-vadym.kochan@plvision.eu Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-26dt-bindings: reset: Add TPS380x documentationMarco Felsch
Add device-tree binding documentation for the tps380x reset driver. The binding uses enum to make it easy to add more devices from that family. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220530092226.748644-1-m.felsch@pengutronix.de
2022-07-26dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY ↵Biju Das
Control bindings Add device tree binding document for RZ/G2UL USBPHY Control Device. RZ/G2UL USBPHY Control Device is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rzg2l-usbphy-ctrl" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220423134601.141975-1-biju.das.jz@bp.renesas.com
2022-07-26drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()Nathan Chancellor
When booting a kernel compiled with clang's CFI protection (CONFIG_CFI_CLANG), there is a CFI failure in drm_simple_kms_crtc_mode_valid() when trying to call simpledrm_simple_display_pipe_mode_valid() through ->mode_valid(): [ 0.322802] CFI failure (target: simpledrm_simple_display_pipe_mode_valid+0x0/0x8): ... [ 0.324928] Call trace: [ 0.324969] __ubsan_handle_cfi_check_fail+0x58/0x60 [ 0.325053] __cfi_check_fail+0x3c/0x44 [ 0.325120] __cfi_slowpath_diag+0x178/0x200 [ 0.325192] drm_simple_kms_crtc_mode_valid+0x58/0x80 [ 0.325279] __drm_helper_update_and_validate+0x31c/0x464 ... The ->mode_valid() member in 'struct drm_simple_display_pipe_funcs' expects a return type of 'enum drm_mode_status', not 'int'. Correct it to fix the CFI failure. Cc: stable@vger.kernel.org Fixes: 11e8f5fd223b ("drm: Add simpledrm driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1647 Reported-by: Tomasz Paweł Gajc <tpgxyz@gmail.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220725233629.223223-1-nathan@kernel.org
2022-07-26ASoC: dt-bindings: tas2780: remove tas2780 and will merge it to tas27xxRaphael-Xu
Remove tas2780 binding documentation, the binding will be documented in the tax27xx binding. Signed-off-by: Raphael-Xu <13691752556@139.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220722105345.175-1-13691752556@139.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-26rtc: Add NCT3018Y real time clock driverMia Lin
Add real time clock support for NCT3018Y. Signed-off-by: Mia Lin <mimi05633@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220713090647.8028-4-mimi05633@gmail.com
2022-07-26dt-bindings: rtc: nuvoton: add NCT3018Y Real Time ClockMia Lin
Document devicetree bindings for the Nuvoton NCT3018Y Real Time Clock. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mia Lin <mimi05633@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220713090647.8028-2-mimi05633@gmail.com
2022-07-26hwmon: (occ) Replace open-coded variant of %*phN specifierAndy Shevchenko
printf()-like functions in the kernel have extensions, such as %*phN to dump small pieces of memory as hex bytes. Replace custom approach with the direct use of %*phN. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220726143110.4809-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-26dt-bindings: rtc: nxp,pcf85063: Convert to DT schemaAlexander Stein
Convert the NXP PCF85063 RTC binding to DT schema format. Add 'interrupts' and 'wakeup-source' as this device has an interrupt which was not documented, but is in use. 'clock-output-names' and '#clock-cells' are added as well, those were probably missed when adding clkout support in commit 8c229ab6048b ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220725071919.25342-1-alexander.stein@ew.tq-group.com
2022-07-26mmc: mediatek: add support for SDIO eint wakup IRQAxe Yang
Add support for eint IRQ when MSDC is used as an SDIO host. This feature requires SDIO device support async IRQ function. With this feature, SDIO host can be awakened by SDIO card in suspend state, without additional pin. MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC turn off clock and switch SDIO DAT1 pin to GPIO mode. And during resume, switch GPIO function back to DAT1 mode then turn on clock. Some device tree property should be added or modified in MSDC node to support SDIO eint IRQ. Pinctrls "state_eint" is mandatory. Since this feature depends on asynchronous interrupts, "wakeup-source", "keep-power-in-suspend" and "cap-sdio-irq" flags are necessary, and the interrupts list should be extended(the interrupt named with sdio_wakeup): &mmcX { ... interrupt-names = "msdc", "sdio_wakeup"; interrupts-extended = <...>, <&pio xxx IRQ_TYPE_LEVEL_LOW>; ... pinctrl-names = "default", "state_uhs", "state_eint"; ... pinctrl-2 = <&mmc2_pins_eint>; ... cap-sdio-irq; keep-power-in-suspend; wakeup-source; ... }; Co-developed-by: Yong Mao <yong.mao@mediatek.com> Signed-off-by: Yong Mao <yong.mao@mediatek.com> Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-4-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26mmc: core: Add support for SDIO wakeup interruptAxe Yang
If wakeup-source flag is set in host dts node, parse EAI information from SDIO CCCR interrupt externsion segment for in-band wakeup. If async interrupt is supported by SDIO card then enable it and set enable_async_irq flag in sdio_cccr structure to 1. The parse flow is implemented in sdio_read_cccr(). Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Link: https://lore.kernel.org/r/20220726062842.18846-3-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls propertiesAxe Yang
Extend interrupts and pinctrls for SDIO wakeup interrupt feature. This feature allow SDIO devices alarm asynchronous interrupt to host even when host stop providing clock to SDIO card. An extra wakeup interrupt and pinctrl states for SDIO DAT1 pin state switching are required in this scenario. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Axe Yang <axe.yang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220726062842.18846-2-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26dt-bindings: rtc: microcrystal,rv3032: Add missing type to ↵Rob Herring
'trickle-voltage-millivolt' 'trickle-voltage-millivolt' is missing a type definition. '-millivolt' is not a standard unit (should be '-microvolt'). As the property is already in use, add a type reference. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220719215143.1877566-1-robh@kernel.org
2022-07-26rtc: rx8025: fix 12/24 hour mode detection on RX-8035Mathew McBride
The 12/24hr flag in the RX-8035 can be found in the hour register, instead of the CTRL1 on the RX-8025. This was overlooked when support for the RX-8035 was added, and was causing read errors when the hour register 'overflowed'. To deal with the relevant register not always being visible in the relevant functions, determine the 12/24 mode at startup and store it in the driver state. Signed-off-by: Mathew McBride <matt@traverse.com.au> Fixes: f120e2e33ac8 ("rtc: rx8025: implement RX-8035 support") Cc: stable@vger.kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220706074236.24011-1-matt@traverse.com.au
2022-07-26dt-bindings: mmc: rockchip-dw-mshc: Document Rockchip RV1126Jagan Teki
Add a compatible string for Rockchip RV1126 SoC. Signed-off-by: Jagan Teki <jagan@edgeble.ai> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220723204335.750095-12-jagan@edgeble.ai Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-26rtc: cros-ec: Only warn once in .remove() about notifier_chain problemsUwe Kleine-König
When a remove platform device callback returns an error code, the driver core emits an error message ("remove callback returned a non-zero value. This will be ignored.\n") and still removes the device. As the driver already emits a more specific error message, return 0 to suppress the core's error message. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220707153156.214841-1-u.kleine-koenig@pengutronix.de
2022-07-26rtc: vr41xx: remove driverThomas Bogendoerfer
Commit d3164e2f3b0a ("MIPS: Remove VR41xx support") removed support for MIPS VR41xx platform, so remove exclusive drivers for this platform, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220715135330.134684-1-tsbogend@alpha.franken.de
2022-07-26rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler()Tom Rix
cppcheck reports [drivers/rtc/rtc-mpfs.c:219]: (style) Variable 'pending' is assigned a value that is never used. The fetched CONTROL_REG stored in pending is unused and partially duplicates the functionality of the later call to mpfs_rtc_clear(). This looks like leftover development code, so remove pending. Fixes: 0b31d703598d ("rtc: Add driver for Microchip PolarFire SoC") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20220627205943.2075043-1-trix@redhat.com
2022-07-26selftests/bpf: Attach to socketcall() in test_probe_userIlya Leoshkevich
test_probe_user fails on architectures where libc uses socketcall(SYS_CONNECT) instead of connect(). Fix by attaching to socketcall as well. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20220726134008.256968-3-iii@linux.ibm.com
2022-07-26libbpf: Extend BPF_KSYSCALL documentationIlya Leoshkevich
Explicitly list known quirks. Mention that socket-related syscalls can be invoked via socketcall(). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/bpf/20220726134008.256968-2-iii@linux.ibm.com
2022-07-26bpf, devmap: Compute proper xdp_frame len redirecting framesLorenzo Bianconi
Even if it is currently forbidden to XDP_REDIRECT a multi-frag xdp_frame into a devmap, compute proper xdp_frame length in __xdp_enqueue and is_valid_dst routines running xdp_get_frame_len(). Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/894d99c01139e921bdb6868158ff8e67f661c072.1658596075.git.lorenzo@kernel.org
generated by cgit (git 2.34.1) at 2025-09-29 14:20:16 +0000