summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-06-27xfs: xfs_ifree_cluster vs xfs_iflush_shutdown_abort deadlockDave Chinner
Lock order of xfs_ifree_cluster() is cluster buffer -> try ILOCK -> IFLUSHING, except for the last inode in the cluster that is triggering the free. In that case, the lock order is ILOCK -> cluster buffer -> IFLUSHING. xfs_iflush_cluster() uses cluster buffer -> try ILOCK -> IFLUSHING, so this can safely run concurrently with xfs_ifree_cluster(). xfs_inode_item_precommit() uses ILOCK -> cluster buffer, but this cannot race with xfs_ifree_cluster() so being in a different order will not trigger a deadlock. xfs_reclaim_inode() during a filesystem shutdown uses ILOCK -> IFLUSHING -> cluster buffer via xfs_iflush_shutdown_abort(), and this deadlocks against xfs_ifree_cluster() like so: sysrq: Show Blocked State task:kworker/10:37 state:D stack:12560 pid:276182 tgid:276182 ppid:2 flags:0x00004000 Workqueue: xfs-inodegc/dm-3 xfs_inodegc_worker Call Trace: <TASK> __schedule+0x650/0xb10 schedule+0x6d/0xf0 schedule_timeout+0x8b/0x180 schedule_timeout_uninterruptible+0x1e/0x30 xfs_ifree+0x326/0x730 xfs_inactive_ifree+0xcb/0x230 xfs_inactive+0x2c8/0x380 xfs_inodegc_worker+0xaa/0x180 process_scheduled_works+0x1d4/0x400 worker_thread+0x234/0x2e0 kthread+0x147/0x170 ret_from_fork+0x3e/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> task:fsync-tester state:D stack:12160 pid:2255943 tgid:2255943 ppid:3988702 flags:0x00004006 Call Trace: <TASK> __schedule+0x650/0xb10 schedule+0x6d/0xf0 schedule_timeout+0x31/0x180 __down_common+0xbe/0x1f0 __down+0x1d/0x30 down+0x48/0x50 xfs_buf_lock+0x3d/0xe0 xfs_iflush_shutdown_abort+0x51/0x1e0 xfs_icwalk_ag+0x386/0x690 xfs_reclaim_inodes_nr+0x114/0x160 xfs_fs_free_cached_objects+0x19/0x20 super_cache_scan+0x17b/0x1a0 do_shrink_slab+0x180/0x350 shrink_slab+0xf8/0x430 drop_slab+0x97/0xf0 drop_caches_sysctl_handler+0x59/0xc0 proc_sys_call_handler+0x189/0x280 proc_sys_write+0x13/0x20 vfs_write+0x33d/0x3f0 ksys_write+0x7c/0xf0 __x64_sys_write+0x1b/0x30 x64_sys_call+0x271d/0x2ee0 do_syscall_64+0x68/0x130 entry_SYSCALL_64_after_hwframe+0x76/0x7e We can't change the lock order of xfs_ifree_cluster() - XFS_ISTALE and XFS_IFLUSHING are serialised through to journal IO completion by the cluster buffer lock being held. There's quite a few asserts in the code that check that XFS_ISTALE does not occur out of sync with buffer locking (e.g. in xfs_iflush_cluster). There's also a dependency on the inode log item being removed from the buffer before XFS_IFLUSHING is cleared, also with asserts that trigger on this. Further, we don't have a requirement for the inode to be locked when completing or aborting inode flushing because all the inode state updates are serialised by holding the cluster buffer lock across the IO to completion. We can't check for XFS_IRECLAIM in xfs_ifree_mark_inode_stale() and skip the inode, because there is no guarantee that the inode will be reclaimed. Hence it *must* be marked XFS_ISTALE regardless of whether reclaim is preparing to free that inode. Similarly, we can't check for IFLUSHING before locking the inode because that would result in dirty inodes not being marked with ISTALE in the event of racing with XFS_IRECLAIM. Hence we have to address this issue from the xfs_reclaim_inode() side. It is clear that we cannot hold the inode locked here when calling xfs_iflush_shutdown_abort() because it is the inode->buffer lock order that causes the deadlock against xfs_ifree_cluster(). Hence we need to drop the ILOCK before aborting the inode in the shutdown case. Once we've aborted the inode, we can grab the ILOCK again and then immediately reclaim it as it is now guaranteed to be clean. Note that dropping the ILOCK in xfs_reclaim_inode() means that it can now be locked by xfs_ifree_mark_inode_stale() and seen whilst in this state. This is safe because we have left the XFS_IFLUSHING flag on the inode and so xfs_ifree_mark_inode_stale() will simply set XFS_ISTALE and move to the next inode. An ASSERT check in this path needs to be tweaked to take into account this new shutdown interaction. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
2025-06-27x86/mce/amd: Fix threshold limit resetYazen Ghannam
The MCA threshold limit must be reset after servicing the interrupt. Currently, the restart function doesn't have an explicit check for this. It makes some assumptions based on the current limit and what's in the registers. These assumptions don't always hold, so the limit won't be reset in some cases. Make the reset condition explicit. Either an interrupt/overflow has occurred or the bank is being initialized. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-4-236dd74f645f@amd.com
2025-06-27x86/mce/amd: Add default names for MCA banks and blocksYazen Ghannam
Ensure that sysfs init doesn't fail for new/unrecognized bank types or if a bank has additional blocks available. Most MCA banks have a single thresholding block, so the block takes the same name as the bank. Unified Memory Controllers (UMCs) are a special case where there are two blocks and each has a unique name. However, the microarchitecture allows for five blocks. Any new MCA bank types with more than one block will be missing names for the extra blocks. The MCE sysfs will fail to initialize in this case. Fixes: 87a6d4091bd7 ("x86/mce/AMD: Update sysfs bank names for SMCA systems") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-3-236dd74f645f@amd.com
2025-06-27x86/mce: Ensure user polling settings are honored when restarting timerYazen Ghannam
Users can disable MCA polling by setting the "ignore_ce" parameter or by setting "check_interval=0". This tells the kernel to *not* start the MCE timer on a CPU. If the user did not disable CMCI, then storms can occur. When these happen, the MCE timer will be started with a fixed interval. After the storm subsides, the timer's next interval is set to check_interval. This disregards the user's input through "ignore_ce" and "check_interval". Furthermore, if "check_interval=0", then the new timer will run faster than expected. Create a new helper to check these conditions and use it when a CMCI storm ends. [ bp: Massage. ] Fixes: 7eae17c4add5 ("x86/mce: Add per-bank CMCI storm mitigation") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-2-236dd74f645f@amd.com
2025-06-27i2c: scx200_acb: depends on HAS_IOPORTJohannes Berg
It already depends on X86_32, but that's also set for ARCH=um. Recent changes made UML no longer have IO port access since it's not needed, but this driver uses it. Build it only for HAS_IOPORT. This is pretty much the same as depending on X86, but on the off-chance that HAS_IOPORT will ever be optional on x86 HAS_IOPORT is the real prerequisite. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2025-06-27LoongArch: KVM: Disable updating of "num_cpu" and "feature"Bibo Mao
Property "num_cpu" and "feature" are read-only once eiointc is created, which are set with KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL attr group before device creation. Attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS is to update register and software state for migration and reset usage, property "num_cpu" and "feature" can not be update again if it is created already. Here discard write operation with property "num_cpu" and "feature" in attr group KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL. Cc: stable@vger.kernel.org Fixes: 1ad7efa552fd ("LoongArch: KVM: Add EIOINTC user mode read and write functions") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-27LoongArch: KVM: Check validity of "num_cpu" from user spaceBibo Mao
The maximum supported cpu number is EIOINTC_ROUTE_MAX_VCPUS about irqchip EIOINTC, here add validation about cpu number to avoid array pointer overflow. Cc: stable@vger.kernel.org Fixes: 1ad7efa552fd ("LoongArch: KVM: Add EIOINTC user mode read and write functions") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-27LoongArch: KVM: Check interrupt route from physical CPUBibo Mao
With EIOINTC interrupt controller, physical CPU ID is set for irq route. However the function kvm_get_vcpu() is used to get destination vCPU when delivering irq. With API kvm_get_vcpu(), the logical CPU ID is used. With API kvm_get_vcpu_by_cpuid(), vCPU ID can be searched from physical CPU ID. Cc: stable@vger.kernel.org Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-27LoongArch: KVM: Fix interrupt route update with EIOINTCBibo Mao
With function eiointc_update_sw_coremap(), there is forced assignment like val = *(u64 *)pvalue. Parameter pvalue may be pointer to char type or others, there is problem with forced assignment with u64 type. Here the detailed value is passed rather address pointer. Cc: stable@vger.kernel.org Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-27LoongArch: KVM: Add address alignment check for IOCSR emulationBibo Mao
IOCSR instruction supports 1/2/4/8 bytes access, the address should be naturally aligned with its access size. Here address alignment check is added in the EIOINTC kernel emulation. Cc: stable@vger.kernel.org Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-27Merge tag 'i2c-host-fixes-6.16-rc4' of ↵Wolfram Sang
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current i2c-host fixes for v6.16-rc4 - imx: fix SMBus protocol compliance during block read - omap: fix error handling path in probe - robotfuzz, tiny-usb: prevent zero-length reads - x86, designware, amdisp: fix build error when modules are disabled
2025-06-27drm/panel: panel-simple: get rid of panel_dpi hackMaxime Ripard
The empty panel_dpi struct was only ever used as a discriminant, but it's kind of a hack, and with the reworks done in the previous patches, we shouldn't need it anymore. Let's get rid of it. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6 Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-5-5afcaa608bdc@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-27drm/panel: panel-simple: Add function to look panel data upMaxime Ripard
Commit de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()") moved the call to drm_panel_init into the devm_drm_panel_alloc(), which needs a connector type to initialize properly. In the panel-dpi compatible case, the passed panel_desc structure is an empty one used as a discriminant, and the connector type it contains isn't actually initialized. It is initialized through a call to panel_dpi_probe() later in the function, which used to be before the call to drm_panel_init() that got merged into devm_drm_panel_alloc(). So, we do need a proper panel_desc pointer before the call to devm_drm_panel_alloc() now. All cases associate their panel_desc with the panel compatible and use of_device_get_match_data, except for the panel-dpi compatible. In that case, we're expected to call panel_dpi_probe, which will allocate and initialize the panel_desc for us. Let's create such a helper function that would be called first in the driver and will lookup the desc by compatible, or allocate one if relevant. Reported-by: Francesco Dolcini <francesco@dolcini.it> Closes: https://lore.kernel.org/all/20250612081834.GA248237@francesco-nb/ Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6 Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-4-5afcaa608bdc@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-27drm/panel: panel-simple: Make panel_simple_probe return its panelMaxime Ripard
In order to fix the regession introduced by commit de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()"), we need to move the panel_desc lookup into the common panel_simple_probe() function. There's two callers for that function, the probe implementations of the platform and MIPI-DSI drivers panel-simple implements. The MIPI-DSI driver's probe will need to access the current panel_desc to initialize properly, which won't be possible anymore if we make that lookup in panel_simple_probe(). However, we can make panel_simple_probe() return the initialized panel_simple structure it allocated, which will contain a pointer to the associated panel_desc in its desc field. This doesn't fix de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()") still, but makes progress towards that goal. Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6 Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-3-5afcaa608bdc@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-27drm/panel: panel-simple: make panel_dpi_probe return a panel_descMaxime Ripard
If the panel-simple driver is probed from a panel-dpi compatible, the driver will use an empty panel_desc structure as a descriminant. It will then allocate and fill another panel_desc as part of its probe. However, that allocation needs to happen after the panel_simple structure has been allocated, since panel_dpi_probe(), the function doing the panel_desc allocation and initialization, takes a panel_simple pointer as an argument. This pointer is used to fill the panel_simple->desc pointer that is still initialized with the empty panel_desc when panel_dpi_probe() is called. Since commit de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()"), we will need the panel connector type found in panel_desc to allocate panel_simple. This creates a circular dependency where we need panel_desc to create panel_simple, and need panel_simple to create panel_desc. Let's break that dependency by making panel_dpi_probe simply return the panel_desc it initialized and move the panel_simple->desc assignment to the caller. This will not fix the breaking commit entirely, but will move us towards the right direction. Fixes: de04bb0089a9 ("drm/panel/panel-simple: Use the new allocation in place of devm_kzalloc()") Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6 Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-2-5afcaa608bdc@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-27drm/mipi-dsi: Add dev_is_mipi_dsi functionMaxime Ripard
This will be especially useful for generic panels (like panel-simple) which can take different code path depending on if they are MIPI-DSI devices or platform devices. Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX6 Link: https://lore.kernel.org/r/20250626-drm-panel-simple-fixes-v2-1-5afcaa608bdc@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org>
2025-06-27iommu/rockchip: prevent iommus dead loop when two masters share one IOMMUSimon Xue
When two masters share an IOMMU, calling ops->of_xlate during the second master's driver init may overwrite iommu->domain set by the first. This causes the check if (iommu->domain == domain) in rk_iommu_attach_device() to fail, resulting in the same iommu->node being added twice to &rk_domain->iommus, which can lead to an infinite loop in subsequent &rk_domain->iommus operations. Cc: <stable@vger.kernel.org> Fixes: 25c2325575cc ("iommu/rockchip: Add missing set_platform_dma_ops callback") Signed-off-by: Simon Xue <xxm@rock-chips.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20250623020018.584802-1-xxm@rock-chips.com Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2025-06-26Merge tag 'v6.16-p6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a regression where wp512 can no longer be used with hmac" * tag 'v6.16-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: wp512 - Use API partial block handling
2025-06-26Merge tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefsLinus Torvalds
Pull bcachefs fixes from Kent Overstreet: - Lots of small check/repair fixes, primarily in subvol loop and directory structure loop (when involving snapshots). - Fix a few 6.16 regressions: rare UAF in the foreground allocator path when taking a transaction restart from the transaction bump allocator, and some small fallout from the change to log the error being corrected in the journal when repairing errors, also some fallout from the btree node read error logging improvements. (Alan, Bharadwaj) - New option: journal_rewind This lets the entire filesystem be reset to an earlier point in time. Note that this is only a disaster recovery tool, and right now there are major caveats to using it (discards should be disabled, in particular), but it successfully restored the filesystem of one of the users who was bit by the subvolume deletion bug and didn't have backups. I'll likely be making some changes to the discard path in the future to make this a reliable recovery tool. - Some new btree iterator tracepoints, for tracking down some livelock-ish behaviour we've been seeing in the main data write path. * tag 'bcachefs-2025-06-26' of git://evilpiepirate.org/bcachefs: (51 commits) bcachefs: Plumb correct ip to trans_relock_fail tracepoint bcachefs: Ensure we rewind to run recovery passes bcachefs: Ensure btree node scan runs before checking for scanned nodes bcachefs: btree_root_unreadable_and_scan_found_nothing should not be autofix bcachefs: fix bch2_journal_keys_peek_prev_min() underflow bcachefs: Use wait_on_allocator() when allocating journal bcachefs: Check for bad write buffer key when moving from journal bcachefs: Don't unlock the trans if ret doesn't match BCH_ERR_operation_blocked bcachefs: Fix range in bch2_lookup_indirect_extent() error path bcachefs: fix spurious error_throw bcachefs: Add missing bch2_err_class() to fileattr_set() bcachefs: Add missing key type checks to check_snapshot_exists() bcachefs: Don't log fsck err in the journal if doing repair elsewhere bcachefs: Fix *__bch2_trans_subbuf_alloc() error path bcachefs: Fix missing newlines before ero bcachefs: fix spurious error in read_btree_roots() bcachefs: fsck: Fix oops in key_visible_in_snapshot() bcachefs: fsck: fix unhandled restart in topology repair bcachefs: fsck: Fix check_directory_structure when no check_dirents bcachefs: Fix restart handling in btree_node_scrub_work() ...
2025-06-26Merge tag 'hid-for-linus-2025062701' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - fix for stalls during suspend/resume cycles with hid-nintendo (Daniel J. Ogorchock) - memory leak and reference count fixes in hid-wacom and in-appletb-kdb (Qasim Ijaz) - race condition (leading to kernel crash) fix during device removal in hid-wacom (Thomas Zeitlhofer) - fix for missed interrupt in intel-thc-hid (Intel-thc-hid:) - support for a bunch of new device IDs * tag 'hid-for-linus-2025062701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: lenovo: Add support for ThinkPad X1 Tablet Thin Keyboard Gen2 HID: appletb-kbd: fix "appletb_backlight" backlight device reference counting HID: wacom: fix crash in wacom_aes_battery_handler() HID: intel-ish-hid: ipc: Add Wildcat Lake PCI device ID hid: intel-ish-hid: Use PCI_DEVICE_DATA() macro for ISH device table HID: lenovo: Restrict F7/9/11 mode to compact keyboards only HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY HID: input: lower message severity of 'No inputs registered, leaving' to debug HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras HID: Intel-thc-hid: Intel-quicki2c: Enhance QuickI2C reset flow HID: nintendo: avoid bluetooth suspend/resume stalls HID: wacom: fix kobject reference count leak HID: wacom: fix memory leak on sysfs attribute creation failure HID: wacom: fix memory leak on kobject creation failure
2025-06-27Merge tag 'drm-xe-fixes-2025-06-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes UAPI Changes: Driver Changes: - Missing error check (Haoxiang Li) - Fix xe_hwmon_power_max_write (Karthik) - Move flushes (Maarten and Matthew Auld) - Explicitly exit CT safe mode on unwind (Michal) - Process deferred GGTT node removals on device unwind (Michal) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://lore.kernel.org/r/aF1T6EzzC3xj4K4H@fedora
2025-06-27Merge tag 'drm-intel-fixes-2025-06-26' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Fix for SNPS PHY HDMI for 1080p@120Hz - Correct DP AUX DPCD probe address - Followup build fix for GCOV and AutoFDO enabled config Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://lore.kernel.org/r/aFzsHR9WLYsxg8jy@jlahtine-mobl
2025-06-27Merge tag 'amd-drm-fixes-6.16-2025-25-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.16-2025-25-25: amdgpu: - Cleaner shader support for additional GFX9 GPUs - MES firmware compatibility fixes - Discovery error reporting fixes - SDMA6/7 userq fixes - Backlight fix - EDID sanity check Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250625151734.11537-1-alexander.deucher@amd.com
2025-06-26Merge tag 'devicetree-fixes-for-6.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were applied for nios2, but never sent upstream. - Fix extra '/' in fsl,ls1028a-reset '$id' path - Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref. * tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Convert altr,uart-1.0 to DT schema dt-bindings: serial: Convert altr,juart-1.0 to DT schema dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
2025-06-26PM: Restrict swap use to later in the suspend sequenceMario Limonciello
Currently swap is restricted before drivers have had a chance to do their prepare() PM callbacks. Restricting swap this early means that if a driver needs to evict some content from memory into sawp in it's prepare callback, it won't be able to. On AMD dGPUs this can lead to failed suspends under memory pressure situations as all VRAM must be evicted to system memory or swap. Move the swap restriction to right after all devices have had a chance to do the prepare() callback. If there is any problem with the sequence, restore swap in the appropriate dpm resume callbacks or error handling paths. Closes: https://github.com/ROCm/ROCK-Kernel-Driver/issues/174 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2362 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Nat Wittstock <nat@fardog.io> Tested-by: Lucian Langa <lucilanga@7pot.org> Link: https://patch.msgid.link/20250613214413.4127087-1-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-06-26io_uring/kbuf: flag partial buffer mappingsJens Axboe
A previous commit aborted mapping more for a non-incremental ring for bundle peeking, but depending on where in the process this peeking happened, it would not necessarily prevent a retry by the user. That can create gaps in the received/read data. Add struct buf_sel_arg->partial_map, which can pass this information back. The networking side can then map that to internal state and use it to gate retry as well. Since this necessitates a new flag, change io_sr_msg->retry to a retry_flags member, and store both the retry and partial map condition in there. Cc: stable@vger.kernel.org Fixes: 26ec15e4b0c1 ("io_uring/kbuf: don't truncate end buffer for multiple buffer peeks") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-26NFSv4/flexfiles: Fix handling of NFS level errors in I/OTrond Myklebust
Allow the flexfiles error handling to recognise NFS level errors (as opposed to RPC level errors) and handle them separately. The main motivator is the NFSERR_PERM errors that get returned if the NFS client connects to the data server through a port number that is lower than 1024. In that case, the client should disconnect and retry a READ on a different data server, or it should retry a WRITE after reconnecting. Reviewed-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Fixes: d67ae825a59d ("pnfs/flexfiles: Add the FlexFile Layout Driver") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
2025-06-26Merge tag 'net-6.16-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bluetooth and wireless. Current release - regressions: - bridge: fix use-after-free during router port configuration Current release - new code bugs: - eth: wangxun: fix the creation of page_pool Previous releases - regressions: - netpoll: initialize UDP checksum field before checksumming - wifi: mac80211: finish link init before RCU publish - bluetooth: fix use-after-free in vhci_flush() - eth: - ionic: fix DMA mapping test - bnxt: properly flush XDP redirect lists Previous releases - always broken: - netlink: specs: enforce strict naming of properties - unix: don't leave consecutive consumed OOB skbs. - vsock: fix linux/vm_sockets.h userspace compilation errors - selftests: fix TCP packet checksum" * tag 'net-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits) net: libwx: fix the creation of page_pool net: selftests: fix TCP packet checksum atm: Release atm_dev_mutex after removing procfs in atm_dev_deregister(). netlink: specs: enforce strict naming of properties netlink: specs: tc: replace underscores with dashes in names netlink: specs: rt-link: replace underscores with dashes in names netlink: specs: mptcp: replace underscores with dashes in names netlink: specs: ovs_flow: replace underscores with dashes in names netlink: specs: devlink: replace underscores with dashes in names netlink: specs: dpll: replace underscores with dashes in names netlink: specs: ethtool: replace underscores with dashes in names netlink: specs: fou: replace underscores with dashes in names netlink: specs: nfsd: replace underscores with dashes in names net: enetc: Correct endianness handling in _enetc_rd_reg64 atm: idt77252: Add missing `dma_map_error()` bnxt: properly flush XDP redirect lists vsock/uapi: fix linux/vm_sockets.h userspace compilation errors wifi: mac80211: finish link init before RCU publish wifi: iwlwifi: mvm: assume '1' as the default mac_config_cmd version selftest: af_unix: Add tests for -ECONNRESET. ...
2025-06-26cifs: Fix reading into an ITER_FOLIOQ from the smbdirect codeDavid Howells
When performing a file read from RDMA, smbd_recv() prints an "Invalid msg type 4" error and fails the I/O. This is due to the switch-statement there not handling the ITER_FOLIOQ handed down from netfslib. Fix this by collapsing smbd_recv_buf() and smbd_recv_page() into smbd_recv() and just using copy_to_iter() instead of memcpy(). This future-proofs the function too, in case more ITER_* types are added. Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: David Howells <dhowells@redhat.com> cc: Tom Talpey <tom@talpey.com> cc: Paulo Alcantara (Red Hat) <pc@manguebit.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-26cifs: Fix the smbd_response slab to allow usercopyDavid Howells
The handling of received data in the smbdirect client code involves using copy_to_iter() to copy data from the smbd_reponse struct's packet trailer to a folioq buffer provided by netfslib that encapsulates a chunk of pagecache. If, however, CONFIG_HARDENED_USERCOPY=y, this will result in the checks then performed in copy_to_iter() oopsing with something like the following: CIFS: Attempting to mount //172.31.9.1/test CIFS: VFS: RDMA transport established usercopy: Kernel memory exposure attempt detected from SLUB object 'smbd_response_0000000091e24ea1' (offset 81, size 63)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102! ... RIP: 0010:usercopy_abort+0x6c/0x80 ... Call Trace: <TASK> __check_heap_object+0xe3/0x120 __check_object_size+0x4dc/0x6d0 smbd_recv+0x77f/0xfe0 [cifs] cifs_readv_from_socket+0x276/0x8f0 [cifs] cifs_read_from_socket+0xcd/0x120 [cifs] cifs_demultiplex_thread+0x7e9/0x2d50 [cifs] kthread+0x396/0x830 ret_from_fork+0x2b8/0x3b0 ret_from_fork_asm+0x1a/0x30 The problem is that the smbd_response slab's packet field isn't marked as being permitted for usercopy. Fix this by passing parameters to kmem_slab_create() to indicate that copy_to_iter() is permitted from the packet region of the smbd_response slab objects, less the header space. Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Reported-by: Stefan Metzmacher <metze@samba.org> Link: https://lore.kernel.org/r/acb7f612-df26-4e2a-a35d-7cd040f513e1@samba.org/ Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Stefan Metzmacher <metze@samba.org> Tested-by: Stefan Metzmacher <metze@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-26smb: client: fix potential deadlock when reconnecting channelsPaulo Alcantara
Fix cifs_signal_cifsd_for_reconnect() to take the correct lock order and prevent the following deadlock from happening ====================================================== WARNING: possible circular locking dependency detected 6.16.0-rc3-build2+ #1301 Tainted: G S W ------------------------------------------------------ cifsd/6055 is trying to acquire lock: ffff88810ad56038 (&tcp_ses->srv_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x134/0x200 but task is already holding lock: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&ret_buf->chan_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_setup_session+0x81/0x4b0 cifs_get_smb_ses+0x771/0x900 cifs_mount_get_session+0x7e/0x170 cifs_mount+0x92/0x2d0 cifs_smb3_do_mount+0x161/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&ret_buf->ses_lock){+.+.}-{3:3}: validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_match_super+0x101/0x320 sget+0xab/0x270 cifs_smb3_do_mount+0x1e0/0x460 smb3_get_tree+0x55/0x90 vfs_get_tree+0x46/0x180 do_new_mount+0x1b0/0x2e0 path_mount+0x6ee/0x740 do_mount+0x98/0xe0 __do_sys_mount+0x148/0x180 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&tcp_ses->srv_lock){+.+.}-{3:3}: check_noncircular+0x95/0xc0 check_prev_add+0x115/0x2f0 validate_chain+0x1cf/0x270 __lock_acquire+0x60e/0x780 lock_acquire.part.0+0xb4/0x1f0 _raw_spin_lock+0x2f/0x40 cifs_signal_cifsd_for_reconnect+0x134/0x200 __cifs_reconnect+0x8f/0x500 cifs_handle_standard+0x112/0x280 cifs_demultiplex_thread+0x64d/0xbc0 kthread+0x2f7/0x310 ret_from_fork+0x2a/0x230 ret_from_fork_asm+0x1a/0x30 other info that might help us debug this: Chain exists of: &tcp_ses->srv_lock --> &ret_buf->ses_lock --> &ret_buf->chan_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ret_buf->chan_lock); lock(&ret_buf->ses_lock); lock(&ret_buf->chan_lock); lock(&tcp_ses->srv_lock); *** DEADLOCK *** 3 locks held by cifsd/6055: #0: ffffffff857de398 (&cifs_tcp_ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x7b/0x200 #1: ffff888119c64060 (&ret_buf->ses_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0x9c/0x200 #2: ffff888119c64330 (&ret_buf->chan_lock){+.+.}-{3:3}, at: cifs_signal_cifsd_for_reconnect+0xcf/0x200 Cc: linux-cifs@vger.kernel.org Reported-by: David Howells <dhowells@redhat.com> Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data") Reviewed-by: David Howells <dhowells@redhat.com> Tested-by: David Howells <dhowells@redhat.com> Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2025-06-26x86/mce: Don't remove sysfs if thresholding sysfs init failsYazen Ghannam
Currently, the MCE subsystem sysfs interface will be removed if the thresholding sysfs interface fails to be created. A common failure is due to new MCA bank types that are not recognized and don't have a short name set. The MCA thresholding feature is optional and should not break the common MCE sysfs interface. Also, new MCA bank types are occasionally introduced, and updates will be needed to recognize them. But likewise, this should not break the common sysfs interface. Keep the MCE sysfs interface regardless of the status of the thresholding sysfs interface. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250624-wip-mca-updates-v4-1-236dd74f645f@amd.com
2025-06-26platform/x86: wmi: Update documentation of WCxx/WExx ACPI methodsArmin Wolf
Inform potential firmware developers that WExx ACPI methods are always called by the WMI driver core even if the associated WMI event is not marked as being expensive. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250619221440.6737-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-26platform/x86: wmi: Fix WMI event enablementArmin Wolf
It turns out that the Windows WMI-ACPI driver always enables/disables WMI events regardless of whether they are marked as expensive or not. This finding is further reinforced when reading the documentation of the WMI_FUNCTION_CONTROL_CALLBACK callback used by Windows drivers for enabling/disabling WMI devices: The DpWmiFunctionControl routine enables or disables notification of events, and enables or disables data collection for data blocks that the driver registered as expensive to collect. Follow this behavior to fix the WMI event used for reporting hotkey events on the Dell Latitude 5400 and likely many more devices. Reported-by: Dmytro Bagrii <dimich.dmb@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220246 Tested-by: Dmytro Bagrii <dimich.dmb@gmail.com> Fixes: 656f0961d126 ("platform/x86: wmi: Rework WCxx/WExx ACPI method handling") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250619221440.6737-1-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-26usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pmMathias Nyman
Delayed work to prevent USB3 hubs from runtime-suspending immediately after resume was added in commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs"). This delayed work needs be flushed if system suspends, or hub needs to be quiesced for other reasons right after resume. Not flushing it triggered issues on QC SC8280XP CRD board during suspend/resume testing. Fix it by flushing the delayed resume work in hub_quiesce() The delayed work item that allow hub runtime suspend is also scheduled just before calling autopm get. Alan pointed out there is a small risk that work is run before autopm get, which would call autopm put before get, and mess up the runtime pm usage order. Swap the order of work sheduling and calling autopm get to solve this. Cc: stable <stable@kernel.org> Fixes: 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs") Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Closes: https://lore.kernel.org/linux-usb/acaaa928-832c-48ca-b0ea-d202d5cd3d6c@oss.qualcomm.com Reported-by: Alan Stern <stern@rowland.harvard.edu> Closes: https://lore.kernel.org/linux-usb/c73fbead-66d7-497a-8fa1-75ea4761090a@rowland.harvard.edu Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20250626130102.3639861-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-26platform/mellanox: nvsw-sn2201: Fix bus number in adapter error messageAlok Tiwari
change error log to use correct bus number from main_mux_devs instead of cpld_devs. Fixes: 662f24826f95 ("platform/mellanox: Add support for new SN2201 system") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20250622072921.4111552-2-alok.a.tiwari@oracle.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-26platform/mellanox: Fix spelling and comment clarity in Mellanox driversAlok Tiwari
This commit corrects several minor typographical errors in comments and error messages across multiple Mellanox platform driver. Fixed spelling of "thresholds", "region", "platform", "default", and removed redundant spaces in comment strings and error logs. These changes are cosmetic and do not affect runtime behavior. Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250622072921.4111552-1-alok.a.tiwari@oracle.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-06-26block: fix false warning in bdev_count_inflight_rw()Yu Kuai
While bdev_count_inflight is interating all cpus, if some IOs are issued from traversed cpu and then completed from the cpu that is not traversed yet: cpu0 cpu1 bdev_count_inflight //for_each_possible_cpu // cpu0 is 0 infliht += 0 // issue a io blk_account_io_start // cpu0 inflight ++ cpu2 // the io is done blk_account_io_done // cpu2 inflight -- // cpu 1 is 0 inflight += 0 // cpu2 is -1 inflight += -1 ... In this case, the total inflight will be -1, causing lots of false warning. Fix the problem by removing the warning. Noted there is still a valid warning for nvme-mpath(From Yi) that is not fixed yet. Fixes: f5482ee5edb9 ("block: WARN if bdev inflight counter is negative") Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#mae89155a5006463d0a21a4a2c35ae0034b26a339 Reported-and-tested-by: Calvin Owens <calvin@wbinvd.org> Closes: https://lore.kernel.org/linux-block/aFtUXy-lct0WxY2w@mozart.vkv.me/T/#m1d935a00070bf95055d0ac84e6075158b08acaef Reported-by: Dave Chinner <david@fromorbit.com> Closes: https://lore.kernel.org/linux-block/aFuypjqCXo9-5_En@dread.disaster.area/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20250626115743.1641443-1-yukuai3@huawei.com Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-26Merge tag 'nvme-6.16-2025-06-26' of git://git.infradead.org/nvme into block-6.16Jens Axboe
Pull NVMe fixes from Christoph: " - reset delayed remove_work after reconnect (Keith Busch) - fix atomic write size validation (Christoph Hellwig)" * tag 'nvme-6.16-2025-06-26' of git://git.infradead.org/nvme: nvme: fix atomic write size validation nvme: refactor the atomic write unit detection nvme: reset delayed remove_work after reconnect
2025-06-26ublk: sanity check add_dev input for underflowRonnie Sahlberg
Add additional checks that queue depth and number of queues are non-zero. Signed-off-by: Ronnie Sahlberg <rsahlberg@whamcloud.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20250626022046.235018-1-ronniesahlberg@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-06-26drm/xe: Process deferred GGTT node removals on device unwindMichal Wajdeczko
While we are indirectly draining our dedicated workqueue ggtt->wq that we use to complete asynchronous removal of some GGTT nodes, this happends as part of the managed-drm unwinding (ggtt_fini_early), which could be later then manage-device unwinding, where we could already unmap our MMIO/GMS mapping (mmio_fini). This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747340 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747540 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747240 __xe_bo_unpin_map_no_vm (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747040 tiles_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746840 mmio_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e747f40 xe_bo_pinned_fini (16 bytes) [ ] xe 0000:00:02.1: DEVRES REL ffff88811e746b40 devm_drm_dev_init_release (16 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] drmres release begin [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef81640 __fini_relay (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80d40 guc_ct_fini (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80040 __drmm_mutex_release (8 bytes) [ ] xe 0000:00:02.1: [drm:drm_managed_release] REL ffff88810ef80140 ggtt_fini_early (8 bytes) and this was leading to: [ ] BUG: unable to handle page fault for address: ffffc900058162a0 [ ] #PF: supervisor write access in kernel mode [ ] #PF: error_code(0x0002) - not-present page [ ] Oops: Oops: 0002 [#1] SMP NOPTI [ ] Tainted: [W]=WARN [ ] Workqueue: xe-ggtt-wq ggtt_node_remove_work_func [xe] [ ] RIP: 0010:xe_ggtt_set_pte+0x6d/0x350 [xe] [ ] Call Trace: [ ] <TASK> [ ] xe_ggtt_clear+0xb0/0x270 [xe] [ ] ggtt_node_remove+0xbb/0x120 [xe] [ ] ggtt_node_remove_work_func+0x30/0x50 [xe] [ ] process_one_work+0x22b/0x6f0 [ ] worker_thread+0x1e8/0x3d Add managed-device action that will explicitly drain the workqueue with all pending node removals prior to releasing MMIO/GSM mapping. Fixes: 919bb54e989c ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/20250612220937.857-2-michal.wajdeczko@intel.com (cherry picked from commit 89d2835c3680ab1938e22ad81b1c9f8c686bd391) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-26drm/xe/guc: Explicitly exit CT safe mode on unwindMichal Wajdeczko
During driver probe we might be briefly using CT safe mode, which is based on a delayed work, but usually we are able to stop this once we have IRQ fully operational. However, if we abort the probe quite early then during unwind we might try to destroy the workqueue while there is still a pending delayed work that attempts to restart itself which triggers a WARN. This was recently observed during unsuccessful VF initialization: [ ] xe 0000:00:02.1: probe with driver xe failed with error -62 [ ] ------------[ cut here ]------------ [ ] workqueue: cannot queue safe_mode_worker_func [xe] on wq xe-g2h-wq [ ] WARNING: CPU: 9 PID: 0 at kernel/workqueue.c:2257 __queue_work+0x287/0x710 [ ] RIP: 0010:__queue_work+0x287/0x710 [ ] Call Trace: [ ] delayed_work_timer_fn+0x19/0x30 [ ] call_timer_fn+0xa1/0x2a0 Exit the CT safe mode on unwind to avoid that warning. Fixes: 09b286950f29 ("drm/xe/guc: Allow CTB G2H processing without G2H IRQ") Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://lore.kernel.org/r/20250612220937.857-3-michal.wajdeczko@intel.com (cherry picked from commit 2ddbb73ec20b98e70a5200cb85deade22ccea2ec) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-26drm/xe: move DPT l2 flush to a more sensible placeMatthew Auld
Only need the flush for DPT host updates here. Normal GGTT updates don't need special flush. Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://lore.kernel.org/r/20250606104546.1996818-4-matthew.auld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 35db1da40c8cfd7511dc42f342a133601eb45449) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-26drm/xe: Move DSB l2 flush to a more sensible placeMaarten Lankhorst
Flushing l2 is only needed after all data has been written. Fixes: 01570b446939 ("drm/xe/bmg: implement Wa_16023588340") Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: stable@vger.kernel.org # v6.12+ Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://lore.kernel.org/r/20250606104546.1996818-3-matthew.auld@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 0dd2dd0182bc444a62652e89d08c7f0e4fde15ba) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
2025-06-26LoongArch: KVM: Avoid overflow with array indexBibo Mao
The variable index is modified and reused as array index when modify register EIOINTC_ENABLE. There will be array index overflow problem. Cc: stable@vger.kernel.org Fixes: 3956a52bc05b ("LoongArch: KVM: Add EIOINTC read and write functions") Signed-off-by: Bibo Mao <maobibo@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-26LoongArch: Handle KCOV __init vs inline mismatchesKees Cook
When the KCOV is enabled all functions get instrumented, unless the __no_sanitize_coverage attribute is used. To prepare for __no_sanitize_coverage being applied to __init functions, we have to handle differences in how GCC's inline optimizations get resolved. For LoongArch this exposed several places where __init annotations were missing but ended up being "accidentally correct". So fix these cases. Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-26LoongArch: Reserve the EFI memory map regionMing Wang
The EFI memory map at 'boot_memmap' is crucial for kdump to understand the primary kernel's memory layout. This memory region, typically part of EFI Boot Services (BS) data, can be overwritten after ExitBootServices if not explicitly preserved by the kernel. This commit addresses this by: 1. Calling memblock_reserve() to reserve the entire physical region occupied by the EFI memory map (header + descriptors). This prevents the primary kernel from reallocating and corrupting this area. 2. Setting the EFI_PRESERVE_BS_REGIONS flag in efi.flags. This indicates that efforts have been made to preserve critical BS code/data regions which can be useful for other kernel subsystems or debugging. These changes ensure the original EFI memory map data remains intact, improving kdump reliability and potentially aiding other EFI-related functionalities that might rely on preserved BS code/data. Signed-off-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-26LoongArch: Fix build warnings about export.hHuacai Chen
After commit a934a57a42f64a4 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and 7d95680d64ac8e836c ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1"), we get some build warnings with W=1: arch/loongarch/kernel/acpi.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/kernel/alternative.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/kernel/kfpu.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/kernel/traps.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/kernel/unwind_guess.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/kernel/unwind_orc.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/kernel/unwind_prologue.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/lib/crc32-loongarch.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/lib/csum.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing arch/loongarch/kernel/elf.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present arch/loongarch/kernel/paravirt.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present arch/loongarch/pci/pci.c: warning: EXPORT_SYMBOL() is not used, but #include <linux/export.h> is present So fix these build warnings for LoongArch. Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-26LoongArch: Replace __ASSEMBLY__ with __ASSEMBLER__ in headersThomas Huth
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembler code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel. This is bad since macros starting with two underscores are names that are reserved by the C language. It can also be very confusing for the developers when switching between userspace and kernelspace coding, or when dealing with uapi headers that rather should use __ASSEMBLER__ instead. So let's now standardize on the __ASSEMBLER__ macro that is provided by the compilers. This is almost a completely mechanical patch (done with a simple "sed -i" statement), with one comment tweaked manually in the arch/loongarch/include/asm/cpu.h file (it was missing the trailing underscores). Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-06-26nvme: fix atomic write size validationChristoph Hellwig
Don't mix the namespace and controller values, and validate the per-controller limit when probing the controller. This avoid spurious failures for controllers with namespaces that have different namespaces with different logical block sizes, or report the per-namespace values only for some namespaces. It also fixes a missing queue_limits_cancel_update in an error path by removing that error path. Fixes: 8695f060a029 ("nvme: all namespaces in a subsystem must adhere to a common atomic write size") Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Tested-by: Yi Zhang <yi.zhang@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 07:48:05 +0000