summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-11intel_pstate: Move intel_pstate_calc_busy() into ↵Philippe Longepe
get_target_pstate_use_performance() The cpu_load algorithm doesn't need to invoke intel_pstate_calc_busy(), so move that call from intel_pstate_sample() to get_target_pstate_use_performance(). Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-11intel_pstate: Optimize calculation for max/min_perf_adjPhilippe Longepe
mul_fp(int_tofp(A), B) expands to: ((A << FRAC_BITS) * B) >> FRAC_BITS, so the same result can be obtained via simple multiplication A * B. Apply this observation to max_perf * limits->max_perf and max_perf * limits->min_perf in intel_pstate_get_min_max()." Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-11intel_pstate: Remove extra conversions in pid calculationPhilippe Longepe
pid->setpoint and pid->deadband can be initialized in fixed point, so we can avoid the int_tofp in pid_calc. Signed-off-by: Philippe Longepe <philippe.longepe@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-10dm cache: bump the target versionMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm cache: make sure every metadata function checks fail_ioJoe Thornber
Otherwise operations may be attempted that will only ever go on to crash (since the metadata device is either missing or unreliable if 'fail_io' is set). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2016-03-10dm: add missing newline between DM_DEBUG_BLOCK_STACK_TRACING and DM_BUFIOMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm cache policy smq: clarify that mq registration failure was for 'mq'Mike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm: return error if bio_integrity_clone() fails in clone_bio()Mike Snitzer
clone_bio() now checks if bio_integrity_clone() returned an error rather than just drop it on the floor. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm thin metadata: don't issue prefetches if a transaction abort has failedJoe Thornber
If a transaction abort has failed then we can no longer use the metadata device. Typically this happens if the superblock is unreadable. This fix addresses a crash seen during metadata device failure testing. Fixes: 8a01a6af75 ("dm thin: prefetch missing metadata pages") Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm snapshot: disallow the COW and origin devices from being identicalDingXiang
Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[<ffffffffa040efba>] [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20 [ 1959.261816] [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [<ffffffff81216449>] SyS_ioctl+0x79/0x90 [ 1959.294450] [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP <ffff88032a957b30> [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899 Cc: stable@vger.kernel.org Signed-off-by: Ding Xiang <dingxiang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm cache: make the 'mq' policy an alias for 'smq'Joe Thornber
smq seems to be performing better than the old mq policy in all situations, as well as using a quarter of the memory. Make 'mq' an alias for 'smq' when choosing a cache policy. The tunables that were present for the old mq are faked, and have no effect. mq should be considered deprecated now. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm: drop unnecessary assignment of md->queueBob Liu
md->queue and q are the same thing in dm_old_init_request_queue() and dm_mq_init_request_queue(). Also drop the temporary 'struct request_queue *q' in dm_old_init_request_queue(). Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm: reorder 'struct mapped_device' members to fix alignment and holesMike Snitzer
Saves 16 bytes by eliminating 4 4byte holes but more importantly: numerous members that crossed cachelines were fixed. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm: remove dummy definition of 'struct dm_table'Mike Snitzer
Change the map pointer in 'struct mapped_device' from 'struct dm_table __rcu *' to 'void __rcu *' to avoid the need for the dummy definition. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm: add 'dm_numa_node' module parameterMike Snitzer
Allows user to control which NUMA node the memory for DM device structures (e.g. mapped_device, request_queue, gendisk, blk_mq_tag_set) is allocated from. Defaults to NUMA_NO_NODE (-1). Allowable range is from -1 until the last online NUMA node id. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm thin metadata: remove needless newline from subtree_dec() DMERR messageMike Snitzer
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10dm mpath: cleanup reinstate_path() et al based on code reviewMike Snitzer
fail_path() will print a "Failing path ..." message but reinstate_path() doesn't print a "Reinstating path ...". Add that message to reinstate_path() to add symmetry and aid system debugging. Remove reinstate_path()'s check for the path_selector providing .reinstate_path hook. All path selectors provide this and any future ones must too. activate_path() calls pg_init_done() with SCSI_DH_DEV_OFFLINED but pg_init_done() doesn't expicitly handle it in its swicth statement. Add SCSI_DH_DEV_OFFLINED to the default case. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-03-10x86/PCI: VMD: Attach VMD resources to parent domain's resource treeJon Derrick
Attach the new VMD domain's resources to the VMD device's resources. This allows /proc/iomem to display a more complete picture. Before: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2010000-c2013fff : nvme c4000000-c40fffff : 0000:5d:05.5 After: c0000000-c1ffffff : 0000:5d:05.5 c2000000-c3ffffff : 0000:5d:05.5 c2000000-c3ffffff : VMD MEMBAR1 c2000000-c22fffff : PCI Bus 10000:01 c2000000-c200ffff : 10000:01:00.0 c2010000-c2013fff : 10000:01:00.0 c2010000-c2013fff : nvme c2300000-c24fffff : PCI Bus 10000:01 c4000000-c40fffff : 0000:5d:05.5 c4002000-c40fffff : VMD MEMBAR2 Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-03-10x86/PCI: VMD: Set bus resource start to 0Keith Busch
The bus always starts at 0. Due to alignment and down-casting, this happened to work before, but looked alarmingly incorrect in kernel logs. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-10x86/PCI: VMD: Document code for maintainabilityKeith Busch
Comment the less obvious portion of the code for setting up memory windows, and the platform dependency for initializing the h/w with appropriate resources. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-10PCI: Wait for up to 1000ms after FLR resetAlex Williamson
Some devices take longer than the spec indicates to return from FLR reset, a notable case of this is Intel integrated graphics (IGD), which can often take an additional 300ms powering down an attached LCD panel as part of the FLR. Allow devices up to 1000ms, testing every 100ms whether the second dword of config space is read as -1. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-03-10ARC: Add PCI supportJoao Pinto
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC arch to use the generic PCI setup functions. [bhelgaas: fold in Joao's pci-dma-compat.h & pci-bridge.h build fix (I should have caught this myself, sorry] Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-10i2c: designware: Add device HID for future AMD I2C controllerXiangliang Yu
Add device HID AMDI0010 to match the AMD ACPI Vendor ID (AMDI) that was registered in http://www.uefi.org/acpi_id_list, and the I2C controller on future AMD paltform will use the HID instead of AMD0010. Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-10device property: fix for a case of use-after-freeHeikki Krogerus
In device_remove_property_set(), the secondary fwnode needs to be cleared before the pset is freed. This fixes a use-after-free when a property set is providing the primary fwnode. As a result of the fix, the primary fwnode may end up containing ERR_PTR(-ENODEV), so also adding checks for it to the property handling code. Reported-by: John Youn <John.Youn@synopsys.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-10ACPICA / Interpreter: Fix a regression triggered because of wrong Linux ECDT ↵Lv Zheng
support It is reported that the following commit triggers regressions: Linux commit: efaed9be998b5ae0afb7458e057e5f4402b43fa0 ACPICA commit: 31178590dde82368fdb0f6b0e466b6c0add96c57 Subject: ACPICA: Events: Enhance acpi_ev_execute_reg_method() to ensure no _REG evaluations can happen during OS early boot stages This is because that the ECDT support is not corrected in Linux, and Linux requires to execute _REG for ECDT (though this sounds so wrong), we need to ensure acpi_gbl_namespace_initialized is set before ECDT probing in order for _REG to be executed. Since we have to move "acpi_gbl_namespace_initialized = TRUE" to the initialization step happening before ECDT probing, acpi_load_tables() is the best candidate for now. Thus this patch fixes the regression by doing so. But if the ECDT support is fixed, Linux will not execute _REG for ECDT, and ECDT probing will happen before acpi_load_tables(). At that time, we still want to ensure acpi_gbl_namespace_initialized is set after executing acpi_ns_initialize_objects() (under the condition of acpi_gbl_group_module_level_code = FALSE), this patch also moves acpi_ns_initialize_objects() to acpi_load_tables() accordingly. Since acpi_ns_initialize_objects() doesn't seem to be skippable, this patch also removes ACPI_NO_OBJECT_INIT for the one invoked in acpi_load_tables(). And since the default region handlers should always be installed before loading the tables, this patch also removes useless acpi_gbl_group_module_level_code check accordingly. Reported by Chris Bainbridge, Fixed by Lv Zheng. Fixes: efaed9be998b (ACPICA: Events: Enhance acpi_ev_execute_reg_method() to ensure no _REG evaluations can happen during OS early boot stages) Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-10PCI: Prevent VPD access for buggy devicesBabu Moger
On some devices, reading or writing VPD causes a system panic. This can be easily reproduced by running "lspci -vvv" or "cat /sys/bus/devices/XX../vpd". Blacklist these devices so we don't access VPD data at all. [bhelgaas: changelog, comment, drop pci/access.c changes] Link: https://bugzilla.kernel.org/show_bug.cgi?id=110681 Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Alexander Duyck <alexander.duyck@gmail.com>
2016-03-10PCI: Sleep rather than busy-wait for VPD access completionBjorn Helgaas
Use usleep_range() instead of udelay() while waiting for a VPD access to complete. This is not a performance path, so no need to hog the CPU. Rationale for usleep_range() parameters: We clear PCI_VPD_ADDR_F for a read (or set it for a write), then wait for the device to change it. For a device that updates PCI_VPD_ADDR between our config write and subsequent config read, we won't sleep at all and can get the device's maximum rate. Sleeping a minimum of 10 usec per 4-byte access limits throughput to about 400Kbytes/second. VPD is small (32K bytes at most), and most devices use only a fraction of that. We back off exponentially up to 1024 usec per iteration. If we reach 1024, we've already waited up to 1008 usec (16 + 32 + ... + 512), so if we miss an update and wait an extra 1024 usec, we can still get about 1/2 of the device's maximum rate. Tested-by: Shane Seymour <shane.seymour@hpe.com> Tested-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Hannes Reinecke <hare@suse.com>
2016-03-10cpu/hotplug: Fix smpboot thread orderingThomas Gleixner
Commit 931ef163309e moved the smpboot thread park/unpark invocation to the state machine. The move of the unpark invocation was premature as it depends on work in progress patches. As a result cpu down can fail, because rcu synchronization in takedown_cpu() eventually requires a functional softirq thread. I never encountered the problem in testing, but 0day testing managed to provide a reliable reproducer. Remove the smpboot_threads_park() call from the state machine for now and put it back into the original place after the rcu synchronization. I'm embarrassed as I knew about the dependency and still managed to get it wrong. Hotplug induced brain melt seems to be the only sensible explanation for that. Fixes: 931ef163309e "cpu/hotplug: Unpark smpboot threads from the state machine" Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-03-10perf stat: Add --metric-only support for -AAndi Kleen
Add metric only support for -A too. This requires a new print function that prints the metrics in the right order. v2: Fix manpage v3: Simplify nrcpus computation Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf stat: Implement --metric-only modeAndi Kleen
Add a new mode to only print metrics. Sometimes we don't care about the raw values, just want the computed metrics. This allows more compact printing, so with -I each sample is only a single line. This also allows easier plotting and processing with other tools. The main target is with using --topdown, but it also works with -T and standard perf stat. A few metrics are not supported. To avoiding having to hardcode all the metrics in the code it uses a two pass approach: first compute dummy metrics and only print the headers in the print_metric callback. Then use the callback to print the actual values. There are some additional changes in the stat printout code to handle all metrics being on a single line. One issue is that the column code doesn't know in advance what events are not supported by the CPU, and it would be hard to find out as this could change based on dynamic conditions. That causes empty columns in some cases. The output can be fairly wide, often you may need more than 80 columns. Example: % perf stat -a -I 1000 --metric-only 1.001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches 1.001452803 158.91% 0.66 2.39 2.92% 2.002192321 180.63% 0.76 2.08 2.96% 3.003088282 150.59% 0.62 2.57 2.84% 4.004369835 196.20% 0.98 1.62 3.79% 5.005227314 231.98% 0.84 1.90 4.71% v2: Lots of updates. v3: Use slightly narrower columns v4: Add comment Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf stat: Document CSV format in manpageAndi Kleen
With all the recently added fields in the perf stat CSV output we should finally document them in the man page. Do this here. v2: Fix fields in documentation (Jiri) v3: fix order of fields again (Jiri) v4: Change order again. v5: Document more fields (Jiri) v6: Move time stamp first v7: More fixes (Jiri) Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf hists browser: Check sort keys before hot key actionsNamhyung Kim
The context menu in TUI hists browser checks corresponding sort keys when creating the menu item. But hotkey actions lacks these checks so it can filter using incorrect info. For example, default sort key of 'perf top' doesn't contain 'comm' or 'pid' sort key so each hist entry's thread info is not reliable. Thus it should prohibit using thread filter on 't' key. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf hists browser: Allow thread filtering for comm sort keyNamhyung Kim
The commit 2eafd410e669 ("perf hists browser: Only 'Zoom into thread' only when sort order has 'pid'") disabled thread filtering in hist browser for the default sort key. However the he->thread is still valid even if 'pid' sort key is not given. Only thing it should not use is the pid (or tid) of the thread. So allow to filter by thread when 'comm' sort key is given and show pid only if 'pid' sort key is given. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf tools: Add sort__has_comm variableNamhyung Kim
The sort__has_comm variable is to check whether the comm sort key is given. This is necessary to support thread filtering in the TUI hists browser later. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1457533253-21419-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf tools: Recalc total periods using top-level entries in hierarchyNamhyung Kim
When hierarchy mode is enabled, each entry in a hierarchy level shares the period. IOW an upper level entry's period is the sum of lower level entries. Thus perf uses only one of them to calculate the total period of hists. It was lowest-level (leaf) entries but it has a problem when it comes to filters. If a filter is applied, entries in the same level will be filtered or not. But upper level entries still have period of their sum including filtered one. So total sum of upper level entries will not be same as sum of lower level entries. This resulted in entries having more than 100% of overhead and it can be produced using perf top with filter(s). Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1457531222-18130-8-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf tools: Remove nr_sort_keys fieldNamhyung Kim
The nr_sort_keys field is to carry the number of sort entries in a hpp_list or hists to determine the depth of indentation of a hist entry. As it's only used in hierarchy mode and now we have used nr_hpp_node for this reason, there's no need to keep it anymore. Let's get rid of it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()Namhyung Kim
The hist_browser__fprintf_hierarchy_entry() if to dump current output into a file so it needs to be sync-ed with the corresponding function hist_browser__show_hierarchy_entry(). So use hists->nr_hpp_node to indent width and use first fmt_node to print overhead columns instead of checking whether it's a sort entry (or dynamic entry). Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10Merge branch 'pm-cpufreq-governor' into pm-cpufreqRafael J. Wysocki
2016-03-10perf tools: Remove hist_entry->fmt fieldNamhyung Kim
It's not used anymore and the output format is accessed by the hpp_list pointer instead when hierarchy is enabled. Let's get rid of it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1457531222-18130-5-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf tools: Fix command line filters in hierarchy modeNamhyung Kim
When a command-line filter is applied in hierarchy mode, output is broken especially when filtering on lower level. The higher level entries doesn't show up so it's hard to see the results. Also it needs to handle multi sort keys in a single hierarchy level. Before: $ perf report --hierarchy -s 'cpu,{dso,comm}' --comms swapper --stdio ... # Overhead CPU / Shared Object+Command # ........... ........................... # 13.79% [kernel.vmlinux] swapper 31.71% 000 13.80% [kernel.vmlinux] swapper 0.43% [e1000e] swapper 11.89% [kernel.vmlinux] swapper 9.18% [kernel.vmlinux] swapper After: # Overhead CPU / Shared Object+Command # ........... ............................... # 33.09% 003 13.79% [kernel.vmlinux] swapper 31.71% 000 13.80% [kernel.vmlinux] swapper 0.43% [e1000e] swapper 21.90% 002 11.89% [kernel.vmlinux] swapper 13.30% 001 9.18% [kernel.vmlinux] swapper Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1457531222-18130-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf tools: Add more sort entry check functionsNamhyung Kim
Those functions are for checkinf if a given perf_hpp_fmt is a filter-related sort entry. With hierarchy mode, it needs to check filters on the hist entries with its own hpp format list. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1457531222-18130-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10perf tools: Fix hist_entry__filter() for hierarchyNamhyung Kim
When hierarchy mode is enabled each output format is in a separate hpp list. So when applying a filter it should check all formats in the list. Currently it only checks a single ->fmt field which was not set properly. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1457531222-18130-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10cpufreq: Move scheduler-related code to the sched directoryRafael J. Wysocki
Create cpufreq.c under kernel/sched/ and move the cpufreq code related to the scheduler to that file and to sched.h. Redefine cpufreq_update_util() as a static inline function to avoid function calls at its call sites in the scheduler code (as suggested by Peter Zijlstra). Also move the definition of struct update_util_data and declaration of cpufreq_set_update_util_data() from include/linux/cpufreq.h to include/linux/sched.h. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2016-03-10perf jitdump: Build only on supported archsJiri Olsa
Build jitdump only on architectures defined in util/genelf.h file, to avoid breaking the build on such arches. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@suse.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.com> Cc: He Kuang <hekuang@huawei.com> Cc: Mel Gorman <mgorman@suse.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160310164113.GA11357@krava.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10tools lib traceevent: Add '~' operation within arg_num_eval()Steven Rostedt
When evaluating values for print flags, if the value included a '~' operator, the parsing would fail. This broke kmalloc's parsing of: __print_flags(REC->gfp_flags, "|", {(unsigned long)((((((( gfp_t)(0x400000u|0x2000000u)) | (( gfp_t)0x40u) | (( gfp_t)0x80u) | (( gfp_t)0x20000u)) | (( gfp_t)0x02u)) | (( gfp_t)0x08u)) | (( gfp_t)0x4000u) | (( gfp_t)0x10000u) | (( gfp_t)0x1000u) | (( gfp_t)0x200u)) & ~(( gfp_t)0x2000000u)) ^ | here Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20160226181328.22f47129@gandalf.local.home Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-10MAINTAINERS: add a maintainer for the NAND subsystemBoris BREZILLON
Add myself as the maintainer of the NAND subsystem. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-03-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "A few simple fixes for ARM, x86, PPC and generic code. The x86 MMU fix is a bit larger because the surrounding code needed a cleanup, but nothing worrisome" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo kvm: cap halt polling at exactly halt_poll_ns KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS KVM: VMX: disable PEBS before a guest entry KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
2016-03-10Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I thought we were done for 4.5, but then the 64k-page chaps came crawling out of the woodwork. *sigh* The vmemmap fix I sent for -rc7 caused a regression with 64k pages and sparsemem and at some point during the release cycle the new hugetlb code using contiguous ptes started failing the libhugetlbfs tests with 64k pages enabled. So here are a couple of patches that fix the vmemmap alignment and disable the new hugetlb page sizes whilst a proper fix is being developed: - Temporarily disable huge pages built using contiguous ptes - Ensure vmemmap region is sufficiently aligned for sparsemem sections" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hugetlb: partial revert of 66b3923a1a0f arm64: account for sparsemem section alignment when choosing vmemmap offset
2016-03-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three bug fixes: - The fix for the page table corruption (CVE-2016-2143) - The diagnose statistics introduced a regression for the dasd diag driver - Boot crash on systems without the set-program-parameters facility" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: four page table levels vs. fork s390/cpumf: Fix lpp detection s390/dasd: fix diag 0x250 inline assembly
2016-03-10[media] media-device: map new functions into old types for legacy APIMauro Carvalho Chehab
The legacy media controller userspace API exposes entity types that carry both type and function information. The new API replaces the type with a function. It preserves backward compatibility by defining legacy functions for the existing types and using them in drivers. This works fine, as long as newer entity functions won't be added. Unfortunately, some tools, like media-ctl with --print-dot argument rely on the now legacy MEDIA_ENT_T_V4L2_SUBDEV and MEDIA_ENT_T_DEVNODE numeric ranges to identify what entities will be shown. Also, if the entity doesn't match those ranges, it will ignore the major/minor information on devnodes, and won't be getting the devnode name via udev or sysfs. As we're now adding devices outside the old range, the legacy ioctl needs to map the new entity functions into a type at the old range, or otherwise we'll have a regression. Detected on all released media-ctl versions (e. g. versions <= 1.10). Fix this by deriving the type from the function to emulate the legacy API if the function isn't in the legacy functions range. Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit (git 2.34.1) at 2025-09-18 10:09:42 +0000