| Age | Commit message (Collapse) | Author |
|---|
|
The page table dump code logs spans of entries at the same level
(pgd/pud/pmd/pte) which have the same attributes. While we log the
(decoded) attributes, we don't log the level, which leaves the output
ambiguous and/or confusing in some cases.
For example:
0xffff800800000000-0xffff800980000000 6G RW NX SHD AF BLK UXN MEM/NORMAL
If using 4K pages, this may describe a span of 6 1G block entries at the
PGD/PUD level, or 3072 2M block entries at the PMD level.
This patch adds the page table level to each output line, removing this
ambiguity. For the example above, this will produce:
0xffffffc800000000-0xffffffc980000000 6G PUD RW NX SHD AF BLK UXN MEM/NORMAL
When 3 level tables are in use, and we use the asm-generic/nopud.h
definitions, the dump code treats each entry in the PGD as a 1 element
table at the PUD level, and logs spans as being PUDs, which can be
confusing. To counteract this, the "PUD" mnemonic is replaced with "PGD"
when CONFIG_PGTABLE_LEVELS <= 3. Likewise for "PMD" when
CONFIG_PGTABLE_LEVELS <= 2.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Huang Shijie <shijie.huang@arm.com>
Cc: Laura Abbott <labbott@fedoraproject.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Commit ab893fb9f1b17f02 ("arm64: introduce KIMAGE_VADDR as the virtual
base of the kernel region") logically split KIMAGE_VADDR from
PAGE_OFFSET, and since commit f9040773b7bbbd9e ("arm64: move kernel
image to base of vmalloc area") the two have been distinct values.
Unfortunately, neither commit updated the comment above these
definitions, which now erroneously states that PAGE_OFFSET is the start
of the kernel image rather than the start of the linear mapping.
This patch fixes said comment, and introduces an explanation of
KIMAGE_VADDR.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
pmu->irq_affinity will not be freed if an error occurred within
arm_pmu_device_probe after of_pmu_irq_cfg has been called.
Note that in the case of_pmu_irq_cfg is returning an error,
pmu->irq_affinity will not be set, but it should be NULL as pmu was
kzalloc'd. Therefore the result kfree(NULL) is benign.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The global variable __oprofile_cpu_pmu is set before the PMU is fully
initialized. If an error occurs before the end of the initialization,
the PMU will be freed and the variable will contain an invalid pointer.
This will result in a kernel crash when perf will be used.
Fix it by moving the setting of __oprofile_cpu_pmu when the PMU is fully
initialized (i.e when it is no longer possible to fail).
Cc: <stable@vger.kernel.org>
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
The only function called by of_pmu_irq_cfg that will increment the
reference count on dn is of_parse_phandle.
Each time we successfully parse a possible CPU from an
interrupt-affinity property, we increment the refcount of that CPU node
once via of_parse_handle. After validating the CPU is possible, we
decrement the refcount once. Subsequently, we decrement the refcount
again, either as part of an early break if we don't have a matching SPI,
or as part of the end of the loop body.
This will lead to decrementing twice the refcounnt.
Remove the second pairs of call to of_node_put as nobody is using dn
between the first and second call to of_node_put.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
If we take an exception we don't expect (e.g. SError), we report this in
the bad_mode handler with pr_crit. Depending on the configured log
level, we may or may not log additional information in functions called
subsequently. Notably, the messages in dump_stack (including the CPU
number) are printed with KERN_DEFAULT and may not appear.
Some exceptions have an IMPLEMENTATION DEFINED ESR_ELx.ISS encoding, and
knowing the CPU number is crucial to correctly decode them. To ensure
that this is always possible, we should log the CPU number along with
the ESR_ELx value, so we are not reliant on subsequent logs or
additional printk configuration options.
This patch logs the CPU number in bad_mode such that it is possible for
a developer to decode these exceptions, provided access to sufficient
documentation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Al Grant <Al.Grant@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
After the workqueue cleanup, we're registering workqueues based on
the presence of an ->edac_check function. When that is the case,
we're setting OP_RUNNING_POLL. But we forgot to check that in
edac_mc_reset_delay_period(), leading to:
BUG: unable to handle kernel paging request at 0000000000015d10
IP: [ .. ] queued_spin_lock_slowpath
PGD 3ffcc8067 PUD 3ffc56067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in: ...
CPU: 1 PID: 2792 Comm: edactest Not tainted 4.6.0-dirty #1
Hardware name: HP ProLiant MicroServer, BIOS O41 10/01/2013
Stack:
Call Trace:
? _raw_spin_lock_irqsave
? lock_timer_base.isra.34
? del_timer
? try_to_grab_pending
? mod_delayed_work_on
? edac_mc_reset_delay_period
? edac_set_poll_msec
? param_attr_store
? module_attr_store
? kernfs_fop_write
? __vfs_write
? __vfs_read
? __alloc_fd
? vfs_write
? SyS_write
? entry_SYSCALL_64_fastpath
Code:
RIP [ .. ] queued_spin_lock_slowpath
RSP <>
CR2: 0000000000015d10
---[ end trace 3f286bc71cca15d1 ]---
Kernel panic - not syncing: Fatal exception
Fix it.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
Cc: <stable@vger.kernel.org> # 4.5
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1463697958-13406-1-git-send-email-xerofoify@gmail.com
[ Rewrite commit message. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
A regression was introduced in commit 9c349892ccc9 ("brcmfmac: revise
handling events in receive path") which moves eth_type_trans() call
to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes
brcmf_netif_rx() directly. In such case the Ethernet header was not
stripped out resulting in null pointer dereference in the networking
stack.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
IP: [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: fuse ipt_MASQUERADE nf_nat_masquerade_ipv4
iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype
[...]
rtsx_pci scsi_mod usbcore usb_common i8042 serio nvme nvme_core
CPU: 7 PID: 1340 Comm: irq/136-brcmf_p Not tainted 4.7.0-rc1-mainline #1
Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 01.02.00 04/07/2016
task: ffff8804a0c5bd00 ti: ffff88049e124000 task.ti: ffff88049e124000
RIP: 0010:[<ffffffff814c3ce6>] [<ffffffff814c3ce6>]
enqueue_to_backlog+0x56/0x260
RSP: 0018:ffff88049e127ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff8804bddd7c40 RCX: 000000000000002f
RDX: 0000000000000000 RSI: 0000000000000007 RDI: ffff8804bddd7d4c
RBP: ffff88049e127ce8 R08: 0000000000000000 R09: 0000000000000000
R10: ffff8804bddd12c0 R11: 000000000000149e R12: 0000000000017c40
R13: ffff88049e127d08 R14: ffff8804a9bd6d00 R15: ffff8804bddd7d4c
FS: 0000000000000000(0000) GS:ffff8804bddc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000048 CR3: 0000000001806000 CR4: 00000000003406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffff8804bdddad00 ffff8804ad089e00 0000000000000000 0000000000000282
0000000000000000 ffff8804a9bd6d00 ffff8804a1b27e00 ffff8804a9bd6d00
ffff88002ee88000 ffff88049e127d28 ffffffff814c3f3b ffffffff81311fc3
Call Trace:
[<ffffffff814c3f3b>] netif_rx_internal+0x4b/0x170
[<ffffffff81311fc3>] ? swiotlb_tbl_unmap_single+0xf3/0x120
[<ffffffff814c5467>] netif_rx_ni+0x27/0xc0
[<ffffffffa08519e9>] brcmf_netif_rx+0x49/0x70 [brcmfmac]
[<ffffffffa08564d4>] brcmf_msgbuf_process_rx+0x2b4/0x570 [brcmfmac]
[<ffffffff81020017>] ? __xen_set_pgd_hyper+0x57/0xd0
[<ffffffff810d60b0>] ? irq_forced_thread_fn+0x70/0x70
[<ffffffffa0857381>] brcmf_proto_msgbuf_rx_trigger+0x31/0xe0 [brcmfmac]
[<ffffffffa0861e8f>] brcmf_pcie_isr_thread+0x7f/0x110 [brcmfmac]
[<ffffffff810d60d0>] irq_thread_fn+0x20/0x50
[<ffffffff810d63ad>] irq_thread+0x12d/0x1c0
[<ffffffff815d07d5>] ? __schedule+0x2f5/0x7a0
[<ffffffff810d61d0>] ? wake_threads_waitq+0x30/0x30
[<ffffffff810d6280>] ? irq_thread_dtor+0xb0/0xb0
[<ffffffff81098ea8>] kthread+0xd8/0xf0
[<ffffffff815d4b7f>] ret_from_fork+0x1f/0x40
[<ffffffff81098dd0>] ? kthread_worker_fn+0x170/0x170
Code: 1c f5 60 9a 8e 81 9c 58 0f 1f 44 00 00 48 89 45 d0 fa 66 0f 1f
44 00 00 4c 8d bb 0c 01 00 00 4c 89 ff e8 5e 08 11 00 49 8b 56 20 <48>
8b 52 48 83 e2 01 74 10 8b 8b 08 01 00 00 8b 15 59 c5 42 00
RIP [<ffffffff814c3ce6>] enqueue_to_backlog+0x56/0x260
RSP <ffff88049e127ca0>
CR2: 0000000000000048
Fixes: 9c349892ccc9 ("brcmfmac: revise handling events in receive path")
Reported-by: Rafal Milecki <zajec5@gmail.com>
Reported-by: Grey Christoforo <grey@christoforo.net>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Franky Lin <franky.lin@broadcom.com>
[arend@broadcom.com: rephrased the commit message]
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
|
|
Broadwell made a small change to the rank target register moving the
target rank ID field up from bits 16:19 to bits 20:23.
Also found that the offset field grew by one bit in the IVY_BRIDGE to
HASWELL transition, so fix the RIR_OFFSET() macro too.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org # v3.19+
Cc: Aristeu Rozanski <arozansk@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.com
Signed-off-by: Borislav Petkov <bp@suse.de>
|
|
When both EFI and memblock debugging is enabled on the kernel command line:
'efi=debug memblock=debug'
.. the debug messages for early_con look the following way:
[ 0.000000] efi: 0x0000e1050000-0x0000e105ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC]
[ 0.000000] efi: 0x0000e1300000-0x0000e1300fff [Memory Mapped I/O |RUN| | | | | | | | | | |UC]
[ 0.000000] efi: 0x0000e8200000-0x0000e827ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC]
[ 0.000000] efi: 0x008000000000-0x008001e7ffff [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC]
[ 0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
[ 0.000000] *
...
Note the misplaced '*' line, which happened because the memblock debug message
was printed while the EFI debug message was still being constructed..
This patch fixes the output to be the expected:
[ 0.000000] efi: 0x0000e1050000-0x0000e105ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC]
[ 0.000000] efi: 0x0000e1300000-0x0000e1300fff [Memory Mapped I/O |RUN| | | | | | | | | | |UC]
[ 0.000000] efi: 0x0000e8200000-0x0000e827ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC]
[ 0.000000] efi: 0x008000000000-0x008001e7ffff [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC]*
[ 0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
...
Note how the '*' is now in the proper EFI debug message line.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Steve McIntyre <steve@einval.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1464690224-4503-3-git-send-email-matt@codeblueprint.co.uk
[ Made the changelog more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit:
78ce248faa3c ("efi: Iterate over efi.memmap in for_each_efi_memory_desc()")
introduced a regression for systems booted with the 'noefi' kernel option.
In particular, I observed an early kernel hang in efi_find_mirror()'s
for_each_efi_memory_desc() call. As we don't have efi memmap on this
system we enter this iterator with the following parameters:
efi.memmap.map = 0, efi.memmap.map_end = 0, efi.memmap.desc_size = 28
... then for_each_efi_memory_desc_in_map() does the following comparison:
(md) <= (efi_memory_desc_t *)((m)->map_end - (m)->desc_size);
... where md = 0, (m)->map_end = 0 and (m)->desc_size = 28 but when we subtract
something from a NULL pointer wrap around happens and we end up returning
invalid pointer and crash.
Fix it by using the correct pointer arithmetics.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 78ce248faa3c ("efi: Iterate over efi.memmap in for_each_efi_memory_desc()")
Link: http://lkml.kernel.org/r/1464690224-4503-2-git-send-email-matt@codeblueprint.co.uk
[ Made the changelog more readable. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add the pin configuration value of this machine into the pin_quirk
table to make DELL1_MIC_NO_PRESENCE apply to this machine.
Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now that we have topology_max_smt_threads() use it
to detect the HT workarounds for older CPUs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-6-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add topdown event declarations to Silvermont / Airmont.
These cores do not support the full Top Down metrics, but an useful
subset (FrontendBound, Retiring, Backend Bound/Bad Speculation).
The perf stat tool automatically handles the missing events
and combines the available metrics.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-5-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add declarations for the events needed for topdown to the
Intel big core CPUs starting with Sandy Bridge. We need
to report different values if HyperThreading is on or off.
The only thing this patch does is to export some events
in sysfs.
topdown level 1 uses a set of abstracted metrics which
are generic to out of order CPU cores (although some
CPUs may not implement all of them):
topdown-total-slots Available slots in the pipeline
topdown-slots-issued Slots issued into the pipeline
topdown-slots-retired Slots successfully retired
topdown-fetch-bubbles Pipeline gaps in the frontend
topdown-recovery-bubbles Pipeline gaps during recovery
from misspeculation
A slot is a single operation in the CPU pipe line.
These metrics then allow to compute four useful metrics:
FrontendBound, BackendBound, Retiring, BadSpeculation.
The formulas to compute the metrics are generic, they
only change based on the availability on the abstracted
input values.
The kernel declares the events supported by the current
CPU and their scaling factors (such as the pipeline width)
and perf stat then computes the formulas based on the
available metrics. This is similar how existing
perf metrics, such as TSC metrics or IPC, are implemented.
This abstracts all CPU pipe line specific knowledge in the
kernel driver, but still avoids the need for larger scale perf
interface changes.
For HyperThreading the any bit is needed to get accurate
values when both threads are executing. This implies that
the events can only be collected as root or with
perf_event_paranoid=-1 for now.
The basic scheme is based on the following paper:
Yasin, A Top Down Method for Performance analysis and Counter architecture ISPASS14 (pdf available via google)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add a way to show different sysfs events attributes depending on
HyperThreading is on or off. This is difficult to determine
early at boot, so we just do it dynamically when the sysfs
attribute is read.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For SMT specific workarounds it is useful to know if SMT is active
on any online CPU in the system. This currently requires a loop
over all online CPUs.
Add a global variable that is updated with the maximum number
of smt threads on any CPU on online/offline, and use it for
topology_max_smt_threads()
The single call is easier to use than a loop.
Not exported to user space because user space already can use
the existing sibling interfaces to find this out.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-2-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This allows (with a previous change to the perf error return ABI) for
calling out in userspace the exact reason for perf record failing
when PMU doesn't support overflow interrupts.
Note that this needs to be put ahead of existing precise_ip check as
that gets hit otherwise for the sampling fail case as well.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <acme@redhat.com>
Cc: <linux-snps-arc@lists.infradead.org>
Cc: <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/1462786660-2900-2-git-send-email-vgupta@synopsys.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Change the return code for sampling event not supported from -ENOTSUPP
to -EOPNOTSUPP.
This allows userspace to identify this case specifically, instead of
printing the catch-all error message it did previously.
Technically this is an ABI change, but we think we can get away
with it.
Old behavior:
-------
| # perf record ls
| Error:
| The sys_perf_event_open() syscall returned with 524 (Unknown error 524)
| for event (cycles:ppp).
| /bin/dmesg may provide additional information.
| No CONFIG_PERF_EVENTS=y kernel support configured?
New behavior:
-------
| # perf record ls
| Error:
| PMU Hardware doesn't support sampling/overflow-interrupts.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <acme@redhat.com>
Cc: <linux-snps-arc@lists.infradead.org>
Cc: <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/1462786660-2900-3-git-send-email-vgupta@synopsys.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some platforms, e.g. Knights Landing, use a common PCI device ID for
multiple instances of an uncore PMU device type. So it is impossible to
locate the specific instances only by PCI device ID.
The current code specially handles Knights Landing by arbitrarily pointing
an instance to an unused uncore box. However, we still have no idea
which uncore device is mapped to which box.
Furthermore, there could be more platforms which use a common PCI device ID
for uncore devices. We have to specially handle them one by one.
This patch records full device information (slot, func, and device ID)
in id_table[]. So the probe function can point the instance to a specific
uncore box by checking the full device information.
Tested-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: tglx@linutronix.de
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@suse.de
Cc: harish.chegondi@intel.com
Cc: hubert.chrzaniuk@intel.com
Cc: lawrence.f.meadows@intel.com
Link: http://lkml.kernel.org/r/1463379504-39003-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Due to change in register definition we need to update OCR mask:
MSR_OFFCORE_RESP0 reserved bits: 3,4,18,29,30,33,34, 8,11,14
MSR_OFFCORE_RESP1 reserved bits: 3,4,18,29,30,33,34, 38
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: kan.liang@intel.com
Cc: lukasz.anaczkowski@intel.com
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/1463433419-16893-1-git-send-email-lukasz.odzioba@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add the 'static' keyword to intel_bdw_event_constraints[], snb_events_attrs[],
nhm_events_attrs[] and intel_skl_event_constraints arrays[], because
they are only used locally.
Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: kan.liang@intel.com
Cc: lukasz.anaczkowski@intel.com
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/1463433378-16816-1-git-send-email-lukasz.odzioba@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch fixes an issue which was introduced by commit:
91a612eea9a3 ("perf/core: Fix dynamic interrupt throttle")
... which commit unconditionally sets the perf_sample_allowed_ns value
to !0. But that could trigger a bug in the following corner case:
The user can disable the dynamic interrupt throttle mechanism by setting
perf_cpu_time_max_percent to 0. Then they change perf_event_max_sample_rate.
For this case, the mechanism will be enabled implicitly, because
perf_sample_allowed_ns becomes !0 - which is not what we want.
This patch only updates perf_sample_allowed_ns when the dynamic
interrupt throttle mechanism is enabled.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1462260366-3160-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
separate them from AUX ring-buffer records
There are now two different things called AUX in perf, the
infrastructure to deliver the mmap/comm/task records and the
AUX part in the mmap buffer (with associated AUX_RECORD).
Since the former is internal, rename it to side-band to reduce
the confusion factor.
No change in functionality.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The perf_event_aux() function iterates all PMUs and all events in
their respective per-CPU contexts to find the events to deliver
side-band records to.
For example, the brk test case in lkp triggers many mmap() operations,
which, if we're also running perf, results in many perf_event_aux()
invocations.
If we enable uncore PMU support (even when uncore events are not used),
dozens of uncore PMUs will be iterated, which can significantly
decrease brk_test's throughput.
For example, the brk throughput:
without uncore PMUs: 2647573 ops_per_sec
with uncore PMUs: 1768444 ops_per_sec
... a 33% reduction.
To get at the per-CPU events that need side-band records, this patch
puts these events on a per-CPU list, this avoids iterating the PMUs
and any events that do not need side-band records.
Per task events are unchanged to avoid extra overhead on the context
switch paths.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Huang, Ying <ying.huang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1458757477-3781-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There was a report that on certain Broadwell-EP systems writing any bit of
the SBOX PMU initialization MSR would #GP at boot. This did not happen
on all systems. My test systems booted fine.
Considering both DE and EP may have such issues, this patch removes SBOX
support for all Broadwell platforms for now.
Reported-and-tested-by: Mark van Dijk <mark@voidzero.net>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1464347540-5763-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Recursive locking for ww_mutexes was originally conceived as an
exception. However, it is heavily used by the DRM atomic modesetting
code. Currently, the recursive deadlock is checked after we have queued
up for a busy-spin and as we never release the lock, we spin until
kicked, whereupon the deadlock is discovered and reported.
A simple solution for the now common problem is to move the recursive
deadlock discovery to the first action when taking the ww_mutex.
Suggested-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1464293297-19777-1-git-send-email-chris@chris-wilson.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit 50755bc1c305 ("seqlock: fix raw_read_seqcount_latch()") broke
raw_read_seqcount_latch().
If you look at the comment that was modified; the thing that changes is
the seq count, not the latch pointer.
* void latch_modify(struct latch_struct *latch, ...)
* {
* smp_wmb(); <- Ensure that the last data[1] update is visible
* latch->seq++;
* smp_wmb(); <- Ensure that the seqcount update is visible
*
* modify(latch->data[0], ...);
*
* smp_wmb(); <- Ensure that the data[0] update is visible
* latch->seq++;
* smp_wmb(); <- Ensure that the seqcount update is visible
*
* modify(latch->data[1], ...);
* }
*
* The query will have a form like:
*
* struct entry *latch_query(struct latch_struct *latch, ...)
* {
* struct entry *entry;
* unsigned seq, idx;
*
* do {
* seq = lockless_dereference(latch->seq);
So here we have:
seq = READ_ONCE(latch->seq);
smp_read_barrier_depends();
Which is exactly what we want; the new code:
seq = ({ p = READ_ONCE(latch);
smp_read_barrier_depends(); p })->seq;
is just wrong; because it looses the volatile read on seq, which can now
be torn or worse 'optimized'. And the read_depend barrier is also placed
wrong, we want it after the load of seq, to match the above data[]
up-to-date wmb()s.
Such that when we dereference latch->data[] below, we're guaranteed to
observe the right data.
*
* idx = seq & 0x01;
* entry = data_query(latch->data[idx], ...);
*
* smp_rmb();
* } while (seq != latch->seq);
*
* return entry;
* }
So yes, not passing a pointer is not pretty, but the code was correct,
and isn't anymore now.
Change to explicit READ_ONCE()+smp_read_barrier_depends() to avoid
confusion and allow strict lockless_dereference() checking.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 50755bc1c305 ("seqlock: fix raw_read_seqcount_latch()")
Link: http://lkml.kernel.org/r/20160527111117.GL3192@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If bootloader has set a wrong DPLL then we must trash those values
and re-program it anyways. This fixes USB3 devices not being enumerated
on beagle-x15 if usb was started in u-boot.
We don't re-program SATA DPLL if it is locked as it was causing
SATA failures if device was hotpluged after boot.
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
The values computed during Diffie-Hellman key exchange are often used
in combination with key derivation functions to create cryptographic
keys. Add a placeholder for a later implementation to configure a
key derivation function that will transform the Diffie-Hellman
result returned by the KEYCTL_DH_COMPUTE command.
[This patch was stripped down from a patch produced by Mat Martineau that
had a bug in the compat code - so for the moment Stephan's patch simply
requires that the placeholder argument must be NULL]
Original-signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
|
|
This print can really spam the kernel log in case we are truncating
mem_banks, so just print this info once. It should also not be classified
as warning.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
amdkfd need to destroy the debug manager in case amdkfd's notifier
function is called before the unbind function, because in that case,
the unbind function will exit without destroying debug manager.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CC: Stable <stable@vger.kernel.org>
|
|
When unbinding a process from a device (initiated by amd_iommu_v2), the
driver needs to make sure that process still exists in the process table.
There is a possibility that amdkfd's own notifier handler -
kfd_process_notifier_release() - was called before the unbind function
and it already removed the process from the process table.
v2:
Because there can be only one process with the specified pasid, and
because *p can't be NULL inside the hash_for_each_rcu macro, it is more
reasonable to just put the whole code inside the if statement that
compares the pasid value. That way, when we exit hash_for_each_rcu, we
simply exit the function as well.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
CC: Stable <stable@vger.kernel.org>
|
|
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-fixes
omapdrm fixes for 4.7
* multiple compile break fixes for missing includes, bad kconfig dependencies.
* remove regulator API misuse causing deprecation warnings
* OMAP5 HDMI fixes for DDC and AVI infoframe
* OMAP4 HDMI fix for CEC
* tag 'omapdrm-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
drm/omap: include gpio/consumer.h where needed
drm/omap: include linux/seq_file.h where needed
Revert "drm/omap: no need to select OMAP2_DSS"
drm/omap: Remove regulator API abuse
OMAPDSS: HDMI5: Change DDC timings
OMAPDSS: HDMI5: Fix AVI infoframe
drm/omap: fix OMAP4 hdmi_core_powerdown_disable()
drm/omap: Fix missing includes
drm/omapdrm: include pinctrl/consumer.h where needed
|
|
The last field "flags" of object "minfo" is not initialized.
Copying this object out may leak kernel stack data.
Assign 0 to it to avoid leak.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
link_info.str is a char array of size 60. Memory after the NULL
byte is not initialized. Sending the whole object out can cause
a leak.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm updates
- add support for reading LVDS panel EDID over DDC
- enable UYVY/VYUY support
- add support for pixel clock polarity configuration
- honor the native-mode DT property for LVDS
- various fixes and cleanups
* tag 'imx-drm-next-2016-06-01' of git://git.pengutronix.de/git/pza/linux:
drm/imx: plane: Don't set plane->crtc in ipu_plane_update()
drm/imx: ipuv3-plane: Constify ipu_plane_funcs
drm/imx: imx-ldb: honor 'native-mode' property when selecting video mode from DT
drm/imx: parallel-display: remove dead code
drm/imx: use bus_flags for pixel clock polarity
drm/imx: ipuv3-plane: enable UYVY and VYUY formats
drm/imx: parallel-display: use of_graph_get_endpoint_by_regs helper
drm/imx: imx-ldb: use of_graph_get_endpoint_by_regs helper
dt-bindings: imx: ldb: Add ddc-i2c-bus property
drm/imx: imx-ldb: Add DDC support
|
|
github.com:bbrezillon/linux-at91 into drm-fixes
Two trivial bugfixes for the atmel-hlcdc driver.
The first one is making use of __drm_atomic_helper_crtc_destroy_state()
instead of duplicating its logic in atmel_hlcdc_crtc_reset() and
risking memory leaks if other objects are added to the common CRTC
state.
The second one is fixing a possible NULL pointer dereference.
* tag 'drm-atmel-hlcdc-fixes/for-4.7-rc2' of github.com:bbrezillon/linux-at91:
drm: atmel-hlcdc: fix a NULL check
drm: atmel-hlcdc: fix atmel_hlcdc_crtc_reset() implementation
|
|
"I have accumulated some cleanup patches for HDLCD, partly triggered by
Daniel Vetter's work on non-blocking atomic operations, that I would like
to integrate into v4.7. My first patch is important for the newly enabled
hibernate option for AArch64 on Juno, the others are fixing behaviour in
HDLCD and adding a debugfs entry to help track the underlying framebuffer
usage. I'm also taking one of Daniel's patches from his non-blocking series
to help with the integration of his patches later."
* 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld:
drm: hdlcd: Add information about the underlying framebuffers in debugfs
drm: hdlcd: Cleanup the atomic plane operations
drm/hdlcd: Fix up crtc_state->event handling
drm: hdlcd: Revamp runtime power management
|
|
queueing")
Paul Moore tracked a regression caused by a recent commit, which
mistakenly assumed that sk_filter() could be avoided if socket
had no current BPF filter.
The intent was to avoid udp_lib_checksum_complete() overhead.
But sk_filter() also checks skb_pfmemalloc() and
security_sock_rcv_skb(), so better call it.
Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Paul Moore <paul@paul-moore.com>
Tested-by: Paul Moore <paul@paul-moore.com>
Tested-by: Stephen Smalley <sds@tycho.nsa.gov>
Cc: samanthakumar <samanthakumar@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Grant stepped down as kernel DT maintainer and his linaro.org email will
be bouncing soon, so remove him now. Pawel, Ian and Kumar either said
they don't want to remain maintainers or didn't reply, so removing them
as binding maintainers.
Update the DT git tree to mine. Grant's has not been active for a while
now.
I'm actively using patchwork for binding review tracking, so add its
URL.
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Pull KVM fixes from Radim Krčmář:
"ARM:
- two fixes for 4.6 vgic [Christoffer] (cc stable)
- six fixes for 4.7 vgic [Marc]
x86:
- six fixes from syzkaller reports [Paolo] (two of them cc stable)
- allow OS X to boot [Dmitry]
- don't trust compilers [Nadav]"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGS
KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
KVM: irqfd: fix NULL pointer dereference in kvm_irq_map_gsi
KVM: fail KVM_SET_VCPU_EVENTS with invalid exception number
KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUID
kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDR
KVM: Handle MSR_IA32_PERF_CTL
KVM: x86: avoid write-tearing of TDP
KVM: arm/arm64: vgic-new: Removel harmful BUG_ON
arm64: KVM: vgic-v3: Relax synchronization when SRE==1
arm64: KVM: vgic-v3: Prevent the guest from messing with ICC_SRE_EL1
arm64: KVM: Make ICC_SRE_EL1 access return the configured SRE value
KVM: arm/arm64: vgic-v3: Always resample level interrupts
KVM: arm/arm64: vgic-v2: Always resample level interrupts
KVM: arm/arm64: vgic-v3: Clear all dirty LRs
KVM: arm/arm64: vgic-v2: Clear all dirty LRs
|
|
The cpuidle_devices per-CPU variable is only defined when CPU_IDLE is
enabled. Commit c8cc7d4de7a4 ("sched/idle: Reorganize the idle loop")
removed the #ifdef CONFIG_CPU_IDLE around cpuidle_idle_call() with the
compiler optimising away __this_cpu_read(cpuidle_devices). However, with
CONFIG_UBSAN && !CONFIG_CPU_IDLE, this optimisation no longer happens
and the kernel fails to link since cpuidle_devices is not defined.
This patch introduces an accessor function for the current CPU cpuidle
device (returning NULL when !CONFIG_CPU_IDLE) and uses it in
cpuidle_idle_call().
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: 4.5+ <stable@vger.kernel.org> # 4.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
stmmac_mdio_reset() has been updated to use msleep rather udelay
(as some PHY requires a one second delay there).
It called from stmmac_resume() within the spin_lock_irqsave block
atomic context triggering 'scheduling while atomic'.
The stmmac_priv lock usage is not fully documented, but it seems
to protect the access to the MAC registers / DMA structures rather
than the MDIO bus or the PHY (which have separate locking),
so we can push the spin_lock after the stmmac_mdio_reset call.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0809e3ac6231 ("block: fix plug list flushing for nomerge queues")
updated blk_mq_make_request() to set request_count even when
blk_queue_nomerges() returns true. However, blk_mq_make_request() only
does limited plugging and doesn't use request_count;
blk_sq_make_request() is the one that should have been fixed. Do that
and get rid of the unnecessary work in the mq version.
Fixes: 0809e3ac6231 ("block: fix plug list flushing for nomerge queues")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
self-tests code assumes 4k as the sectorsize and nodesize. This commit
fix hardcoded 4K. Enables the self-tests code to be executed on non-4k
page sized systems (e.g. ppc64).
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On ppc64, bytes_per_bitmap will be (65536*8*65536). Hence append UL to
fix integer overflow.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
entries
On a ppc64 machine using 64K as the block size, assume that the RB
tree at btrfs_free_space_ctl->free_space_offset contains following
two entries:
1. A bitmap entry having an offset value of 0 and having the bits
corresponding to the address range [128M+512K, 128M+768K] set.
2. An extent entry corresponding to the address range
[128M-256K, 128M-128K]
In such a scenario, test_check_exists() invoked for checking the
existence of address range [128M+768K, 256M] can lead to an
infinite loop as explained below:
- Checking for the extent entry fails.
- Checking for a bitmap entry results in the free space info in
range [128M+512K, 128M+768K] beng returned.
- rb_prev(info) returns NULL because the bitmap entry starting from
offset 0 comes first in the RB tree.
- current_node = bitmap node.
- while (current_node)
tmp = rb_next(bitmap_node);/*tmp is extent based free space entry*/
Since extent based free space entry's last address is smaller
than the address being searched for (i.e. 128M+768K) we
incorrectly again obtain the extent node as the "next right node"
of the RB tree and thus end up looping infinitely.
This patch fixes the issue by checking the "tmp" variable which point
to the most recently searched free space node.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Feifei Xu <xufeifei@linux.vnet.ibm.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The wrong external interrupt bits are being set, offset by 1.
Signed-off-by: Joshua Henderson <digitalpeer@digitalpeer.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
