summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-01-09scsi: core: Fix command pass through retry regressionMike Christie
scsi_check_passthrough() is always called, but it doesn't check for if a command completed successfully. As a result, if a command was successful and the caller used SCMD_FAILURE_RESULT_ANY to indicate what failures it wanted to retry, we will end up retrying the command. This will cause delays during device discovery because of the command being sent multiple times. For some USB devices it can also cause the wrong device size to be used. This patch adds a check for if the command was successful. If it is we return immediately instead of trying to match a failure. Fixes: 994724e6b3f0 ("scsi: core: Allow passthrough to request midlayer retries") Reported-by: Kris Karas <bugs-a21@moonlit-rail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219652 Signed-off-by: Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20250107010220.7215-1-michael.christie@oracle.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.g.garry@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: qcom: Power down the controller/device during system suspend for ↵Manivannan Sadhasivam
SM8550/SM8650 SoCs SM8550 and SM8650 SoCs doesn't support UFS PHY retention. So once these SoCs reaches the low power state (CX power collapse) during system suspend, all the PHY hardware state gets lost. This leads to the UFS resume failure: ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5 ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5 ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5 ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5 ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5 With the default system suspend level of UFS_PM_LVL_3, the power domain for UFS PHY needs to be kept always ON to retain the state. But this would prevent these SoCs from reaching the CX power collapse state, leading to poor power saving during system suspend. So to fix this issue without affecting the power saving, set 'ufs_qcom_drvdata::no_phy_retention' to true which sets 'hba->spm_lvl' to UFS_PM_LVL_5 to allow both the controller and device (in turn the PHY) to be powered down during system suspend for these SoCs by default. Cc: stable@vger.kernel.org # 6.3 Fixes: 35cf1aaab169 ("arm64: dts: qcom: sm8550: Add UFS host controller and phy nodes") Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> # on SM8550-HDK Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-4-63c4b95a70b9@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: qcom: Allow passing platform specific OF dataManivannan Sadhasivam
In order to allow platform specific flags and configurations, introduce the platform specific OF data and move the existing quirk UFSHCD_QUIRK_BROKEN_LSDBS_CAP for SM8550 and SM8650 SoCs. Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Tested-by: Amit Pundir <amit.pundir@linaro.org> # on SM8550-HDK Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-3-63c4b95a70b9@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: core: Honor runtime/system PM levels if set by host controller ↵Manivannan Sadhasivam
drivers Otherwise, the default levels will override the levels set by the host controller drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-2-63c4b95a70b9@linaro.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-01-02scsi: ufs: qcom: Power off the PHY if it was already powered on in ↵Manivannan Sadhasivam
ufs_qcom_power_up_sequence() PHY might already be powered on during ufs_qcom_power_up_sequence() in a couple of cases: 1. During UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH quirk 2. Resuming from spm_lvl = 5 suspend In those cases, it is necessary to call phy_power_off() and phy_exit() in ufs_qcom_power_up_sequence() function to power off the PHY before calling phy_init() and phy_power_on(). Case (1) is doing it via ufs_qcom_reinit_notify() callback, but case (2) is not handled. So to satisfy both cases, call phy_power_off() and phy_exit() if the phy_count is non-zero. And with this change, the reinit_notify() callback is no longer needed. This fixes the below UFS resume failure with spm_lvl = 5: ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: Enabling the controller failed ufshcd-qcom 1d84000.ufshc: ufshcd_host_reset_and_restore: Host init failed -5 ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: -5 ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume returns -5 ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error -5 Cc: stable@vger.kernel.org # 6.3 Fixes: baf5ddac90dc ("scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device") Reported-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com> Tested-by: Amit Pundir <amit.pundir@linaro.org> # on SM8550-HDK Reviewed-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20241219-ufs-qcom-suspend-fix-v3-1-63c4b95a70b9@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-09scsi: ufs: core: Update compl_time_stamp_local_clock after completing a cqeliuderong
lrbp->compl_time_stamp_local_clock is set to zero after sending a sqe but it is not updated after completing a cqe. Thus the printed information in ufshcd_print_tr() will always be zero. Update lrbp->cmpl_time_stamp_local_clock after completing a cqe. Log sample: ufshcd-qcom 1d84000.ufshc: UPIU[8] - issue time 8750227249 us ufshcd-qcom 1d84000.ufshc: UPIU[8] - complete time 0 us Fixes: c30d8d010b5e ("scsi: ufs: core: Prepare for completion in MCQ") Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: liuderong <liuderong@oppo.com> Link: https://lore.kernel.org/r/1733470182-220841-1-git-send-email-liuderong@oppo.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: scsi_debug: Fix hrtimer support for ndelayJohn Garry
Since commit 771f712ba5b0 ("scsi: scsi_debug: Fix cmd duration calculation"), ns_from_boot value is only evaluated in schedule_resp() for polled requests. However, ns_from_boot is also required for hrtimer support for when ndelay is less than INCLUSIVE_TIMING_MAX_NS, so fix up the logic to decide when to evaluate ns_from_boot. Fixes: 771f712ba5b0 ("scsi: scsi_debug: Fix cmd duration calculation") Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20241202130045.2335194-1-john.g.garry@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN ↵Cathy Avery
as an error This partially reverts commit 812fe6420a6e ("scsi: storvsc: Handle additional SRB status values"). HyperV does not support MAINTENANCE_IN resulting in FC passthrough returning the SRB_STATUS_DATA_OVERRUN value. Now that SRB_STATUS_DATA_OVERRUN is treated as an error, multipath ALUA paths go into a faulty state as multipath ALUA submits RTPG commands via MAINTENANCE_IN. [ 3.215560] hv_storvsc 1d69d403-9692-4460-89f9-a8cbcc0f94f3: tag#230 cmd 0xa3 status: scsi 0x0 srb 0x12 hv 0xc0000001 [ 3.215572] scsi 1:0:0:32: alua: rtpg failed, result 458752 Make MAINTENANCE_IN return success to avoid the error path as is currently done with INQUIRY and MODE_SENSE. Suggested-by: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Cathy Avery <cavery@redhat.com> Link: https://lore.kernel.org/r/20241127181324.3318443-1-cavery@redhat.com Reviewed-by: Michael Kelley <mhklinux@outlook.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: ufs: core: Add missing post notify for power mode changePeter Wang
When the power mode change is successful but the power mode hasn't actually changed, the post notification was missed. Similar to the approach with hibernate/clock scale/hce enable, having pre/post notifications in the same function will make it easier to maintain. Additionally, supplement the description of power parameters for the pwr_change_notify callback. Fixes: 7eb584db73be ("ufs: refactor configuring power mode") Cc: stable@vger.kernel.org #6.11.x Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: sg: Fix slab-use-after-free read in sg_release()Suraj Sonawane
Fix a use-after-free bug in sg_release(), detected by syzbot with KASAN: BUG: KASAN: slab-use-after-free in lock_release+0x151/0xa30 kernel/locking/lockdep.c:5838 __mutex_unlock_slowpath+0xe2/0x750 kernel/locking/mutex.c:912 sg_release+0x1f4/0x2e0 drivers/scsi/sg.c:407 In sg_release(), the function kref_put(&sfp->f_ref, sg_remove_sfp) is called before releasing the open_rel_lock mutex. The kref_put() call may decrement the reference count of sfp to zero, triggering its cleanup through sg_remove_sfp(). This cleanup includes scheduling deferred work via sg_remove_sfp_usercontext(), which ultimately frees sfp. After kref_put(), sg_release() continues to unlock open_rel_lock and may reference sfp or sdp. If sfp has already been freed, this results in a slab-use-after-free error. Move the kref_put(&sfp->f_ref, sg_remove_sfp) call after unlocking the open_rel_lock mutex. This ensures: - No references to sfp or sdp occur after the reference count is decremented. - Cleanup functions such as sg_remove_sfp() and sg_remove_sfp_usercontext() can safely execute without impacting the mutex handling in sg_release(). The fix has been tested and validated by syzbot. This patch closes the bug reported at the following syzkaller link and ensures proper sequencing of resource cleanup and mutex operations, eliminating the risk of use-after-free errors in sg_release(). Reported-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=7efb5850a17ba6ce098b Tested-by: syzbot+7efb5850a17ba6ce098b@syzkaller.appspotmail.com Fixes: cc833acbee9d ("sg: O_EXCL and other lock handling") Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com> Link: https://lore.kernel.org/r/20241120125944.88095-1-surajsonawane0215@gmail.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: ufs: core: sysfs: Prevent div by zeroGwendal Grignou
Prevent a division by 0 when monitoring is not enabled. Fixes: 1d8613a23f3c ("scsi: ufs: core: Introduce HBA performance monitor sysfs nodes") Cc: stable@vger.kernel.org Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Link: https://lore.kernel.org/r/20241120062522.917157-1-gwendal@chromium.org Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Update version to 10.02.09.400-kNilesh Javali
Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Supported speed displayed incorrectly for VPortsAnil Gurumurthy
The fc_function_template for vports was missing the .show_host_supported_speeds. The base port had the same. Add .show_host_supported_speeds to the vport template as well. Cc: stable@vger.kernel.org Fixes: 2c3dfe3f6ad8 ("[SCSI] qla2xxx: add support for NPIV") Signed-off-by: Anil Gurumurthy <agurumurthy@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Fix NVMe and NPIV connect issueQuinn Tran
NVMe controller fails to send connect command due to failure to locate hw context buffer for NVMe queue 0 (blk_mq_hw_ctx, hctx_idx=0). The cause of the issue is NPIV host did not initialize the vha->irq_offset field. This field is given to blk-mq (blk_mq_pci_map_queues) to help locate the beginning of IO Queues which in turn help locate NVMe queue 0. Initialize this field to allow NVMe to work properly with NPIV host. kernel: nvme nvme5: Connect command failed, errno: -18 kernel: nvme nvme5: qid 0: secure concatenation is not supported kernel: nvme nvme5: NVME-FC{5}: create_assoc failed, assoc_id 2e9100 ret 401 kernel: nvme nvme5: NVME-FC{5}: reset: Reconnect attempt failed (401) kernel: nvme nvme5: NVME-FC{5}: Reconnect attempt in 2 seconds Cc: stable@vger.kernel.org Fixes: f0783d43dde4 ("scsi: qla2xxx: Use correct number of vectors for online CPUs") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cntSaurav Kashyap
Firmware supports multiple sg_cnt for request and response for CT commands, so remove the redundant check. A check is there where sg_cnt for request and response should be same. This is not required as driver and FW have code to handle multiple and different sg_cnt on request and response. Cc: stable@vger.kernel.org Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-5-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Fix use after free on unloadQuinn Tran
System crash is observed with stack trace warning of use after free. There are 2 signals to tell dpc_thread to terminate (UNLOADING flag and kthread_stop). On setting the UNLOADING flag when dpc_thread happens to run at the time and sees the flag, this causes dpc_thread to exit and clean up itself. When kthread_stop is called for final cleanup, this causes use after free. Remove UNLOADING signal to terminate dpc_thread. Use the kthread_stop as the main signal to exit dpc_thread. [596663.812935] kernel BUG at mm/slub.c:294! [596663.812950] invalid opcode: 0000 [#1] SMP PTI [596663.812957] CPU: 13 PID: 1475935 Comm: rmmod Kdump: loaded Tainted: G IOE --------- - - 4.18.0-240.el8.x86_64 #1 [596663.812960] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/20/2012 [596663.812974] RIP: 0010:__slab_free+0x17d/0x360 ... [596663.813008] Call Trace: [596663.813022] ? __dentry_kill+0x121/0x170 [596663.813030] ? _cond_resched+0x15/0x30 [596663.813034] ? _cond_resched+0x15/0x30 [596663.813039] ? wait_for_completion+0x35/0x190 [596663.813048] ? try_to_wake_up+0x63/0x540 [596663.813055] free_task+0x5a/0x60 [596663.813061] kthread_stop+0xf3/0x100 [596663.813103] qla2x00_remove_one+0x284/0x440 [qla2xxx] Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: qla2xxx: Fix abort in bsg timeoutQuinn Tran
Current abort of bsg on timeout prematurely clears the outstanding_cmds[]. Abort does not allow FW to return the IOCB/SRB. In addition, bsg_job_done() is not called to return the BSG (i.e. leak). Abort the outstanding bsg/SRB and wait for the completion. The completion IOCB will wake up the bsg_timeout thread. If abort is not successful, then driver will forcibly call bsg_job_done() and free the srb. Err Inject: - qaucli -z - assign CT Passthru IOCB's NportHandle with another initiator nport handle to trigger timeout. Remote port will drop CT request. - bsg_job_done is properly called as part of cleanup kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject. kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa. kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f0838 msgcode 80000004 vendor cmd fa010000 kernel: qla2xxx [0000:21:00.1]-507c:7: Abort command issued - hdl=4b, type=5 kernel: qla2xxx [0000:21:00.1]-5040:7: ELS-CT pass-through-ct pass-through error hdl=4b comp_status-status=0x5 error subcode 1=0x0 error subcode 2=0xaf882e80. kernel: qla2xxx [0000:21:00.1]-7009:7: qla2x00_bsg_job_done: sp hdl 4b, result=70000 bsg ptr ffff9971a42f0838 kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=4b rval=0 kernel: qla2xxx [0000:21:00.1]-708a:7: bsg abort success. bsg ffff9971a42f0838 sp=ffff99760b87ba80 handle=0x4b kernel: qla2xxx [0000:21:00.1]-7012:7: qla2x00_process_ct : 286 : Error Inject. kernel: qla2xxx [0000:21:00.1]-7016:7: bsg rqst type: FC_BSG_HST_CT else type: 101 - loop-id=1 portid=fffffa. kernel: qla2xxx [0000:21:00.1]-70bb:7: qla24xx_bsg_timeout CMD timeout. bsg ptr ffff9971a42f43b8 msgcode 80000004 vendor cmd fa010000 kernel: qla2xxx [0000:21:00.1]-7012:7: qla_bsg_found : 2206 : Error Inject 2. kernel: qla2xxx [0000:21:00.1]-802c:7: Aborting bsg ffff9971a42f43b8 sp=ffff99762c304440 handle=5e rval=5 kernel: qla2xxx [0000:21:00.1]-704f:7: bsg abort fail. bsg=ffff9971a42f43b8 sp=ffff99762c304440 rval=5. kernel: qla2xxx [0000:21:00.1]-7051:7: qla_bsg_found bsg_job_done : bsg ffff9971a42f43b8 result 0xfffffffa sp ffff99762c304440. Cc: stable@vger.kernel.org Fixes: c449b4198701 ("scsi: qla2xxx: Use QP lock to search for bsg") Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20241115130313.46826-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Update driver version to 8.12.0.3.50Ranjan Kumar
Update driver version to 8.12.0.3.50. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-6-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Handling of fault code for insufficient powerRanjan Kumar
Before retrying initialization, check and abort if the fault code indicates insufficient power. Also mark the controller as unrecoverable instead of issuing reset in the watch dog timer if the fault code indicates insufficient power. Signed-off-by: Prayas Patel <prayas.patel@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-5-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Start controller indexing from 0Ranjan Kumar
Instead of displaying the controller index starting from '1' make the driver display the controller index starting from '0'. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-4-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfsRanjan Kumar
The driver, through the SAS transport, exposes a sysfs interface to enable/disable PHYs in a controller/expander setup. When multiple PHYs are disabled and enabled in rapid succession, the persistent and current config pages related to SAS IO unit/SAS Expander pages could get corrupted. Use separate memory for each config request. Signed-off-by: Prayas Patel <prayas.patel@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpi3mr: Synchronize access to ioctl data bufferRanjan Kumar
The driver serializes ioctls through a mutex lock but access to the ioctl data buffer is not guarded by the mutex. This results in multiple user threads being able to write to the driver's ioctl buffer simultaneously. Protect the ioctl buffer with the ioctl mutex. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110194405.10108-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpt3sas: Update driver version to 51.100.00.00Ranjan Kumar
Update driver version to 51.100.00.00. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110173341.11595-3-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load ↵Ranjan Kumar
time Issue a Diag-Reset when the "Doorbell-In-Use" bit is set during the driver load/initialization. Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20241110173341.11595-2-ranjan.kumar@broadcom.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-02Merge branch '6.13/scsi-queue' into 6.13/scsi-fixesMartin K. Petersen
Pull in outstanding changes from 6.13/scsi-queue. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-01Linux 6.13-rc1v6.13-rc1Linus Torvalds
2024-12-01Merge tag 'i2c-for-6.13-rc1-part3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c component probing support from Wolfram Sang: "Add OF component probing. Some devices are designed and manufactured with some components having multiple drop-in replacement options. These components are often connected to the mainboard via ribbon cables, having the same signals and pin assignments across all options. These may include the display panel and touchscreen on laptops and tablets, and the trackpad on laptops. Sometimes which component option is used in a particular device can be detected by some firmware provided identifier, other times that information is not available, and the kernel has to try to probe each device. Instead of a delicate dance between drivers and device tree quirks, this change introduces a simple I2C component probe function. For a given class of devices on the same I2C bus, it will go through all of them, doing a simple I2C read transfer and see which one of them responds. It will then enable the device that responds" * tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: fix typo in I2C OF COMPONENT PROBER of: base: Document prefix argument for of_get_next_child_with_prefix() i2c: Fix whitespace style issue arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail platform/chrome: Introduce device tree hardware prober i2c: of-prober: Add GPIO support to simple helpers i2c: of-prober: Add simple helpers for regulator support i2c: Introduce OF component probe function of: base: Add for_each_child_of_node_with_prefix() of: dynamic: Add of_changeset_update_prop_string
2024-12-01Merge tag 'trace-printf-v6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull bprintf() removal from Steven Rostedt: - Remove unused bprintf() function, that was added with the rest of the "bin-printf" functions. These are functions that are used by trace_printk() that allows to quickly save the format and arguments into the ring buffer without the expensive processing of converting numbers to ASCII. Then on output, at a much later time, the ring buffer is read and the string processing occurs then. The bprintf() was added for consistency but was never used. It can be safely removed. * tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: printf: Remove unused 'bprintf'
2024-12-01Merge tag 'timers_urgent_for_v6.13_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Borislav Petkov: - Fix a case where posix timers with a thread-group-wide target would miss signals if some of the group's threads are exiting - Fix a hang caused by ndelay() calling the wrong delay function __udelay() - Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO (microsecond resolution) and a negative offset * tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Target group sigqueue to current task only if not exiting delay: Fix ndelay() spuriously treated as udelay() ntp: Remove invalid cast in time offset math
2024-12-01Merge tag 'irq_urgent_for_v6.13_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Move the ->select callback to the correct ops structure in irq-mvebu-sei to fix some Marvell Armada platforms - Add a workaround for Hisilicon ITS erratum 162100801 which can cause some virtual interrupts to get lost - More platform_driver::remove() conversion * tag 'irq_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip: Switch back to struct platform_driver::remove() irqchip/gicv3-its: Add workaround for hip09 ITS erratum 162100801 irqchip/irq-mvebu-sei: Move misplaced select() callback to SEI CP domain
2024-12-01Merge tag 'x86_urgent_for_v6.13_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add a terminating zero end-element to the array describing AMD CPUs affected by erratum 1386 so that the matching loop actually terminates instead of going off into the weeds - Update the boot protocol documentation to mention the fact that the preferred address to load the kernel to is considered in the relocatable kernel case too - Flush the memory buffer containing the microcode patch after applying microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns - Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been disabled * tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Terminate the erratum_1386_microcode array x86/Documentation: Update algo in init_size description of boot protocol x86/microcode/AMD: Flush patch buffer mapping after application x86/mm: Carve out INVLPG inline asm for use by others x86/cpu: Fix PPIN initialization
2024-12-01strscpy: write destination buffer only onceLinus Torvalds
The point behind strscpy() was to once and for all avoid all the problems with 'strncpy()' and later broken "fixed" versions like strlcpy() that just made things worse. So strscpy not only guarantees NUL-termination (unlike strncpy), it also doesn't do unnecessary padding at the destination. But at the same time also avoids byte-at-a-time reads and writes by _allowing_ some extra NUL writes - within the size, of course - so that the whole copy can be done with word operations. It is also stable in the face of a mutable source string: it explicitly does not read the source buffer multiple times (so an implementation using "strnlen()+memcpy()" would be wrong), and does not read the source buffer past the size (like the mis-design that is strlcpy does). Finally, the return value is designed to be simple and unambiguous: if the string cannot be copied fully, it returns an actual negative error, making error handling clearer and simpler (and the caller already knows the size of the buffer). Otherwise it returns the string length of the result. However, there was one final stability issue that can be important to callers: the stability of the destination buffer. In particular, the same way we shouldn't read the source buffer more than once, we should avoid doing multiple writes to the destination buffer: first writing a potentially non-terminated string, and then terminating it with NUL at the end does not result in a stable result buffer. Yes, it gives the right result in the end, but if the rule for the destination buffer was that it is _always_ NUL-terminated even when accessed concurrently with updates, the final byte of the buffer needs to always _stay_ as a NUL byte. [ Note that "final byte is NUL" here is literally about the final byte in the destination array, not the terminating NUL at the end of the string itself. There is no attempt to try to make concurrent reads and writes give any kind of consistent string length or contents, but we do want to guarantee that there is always at least that final terminating NUL character at the end of the destination array if it existed before ] This is relevant in the kernel for the tsk->comm[] array, for example. Even without locking (for either readers or writers), we want to know that while the buffer contents may be garbled, it is always a valid C string and always has a NUL character at 'comm[TASK_COMM_LEN-1]' (and never has any "out of thin air" data). So avoid any "copy possibly non-terminated string, and terminate later" behavior, and write the destination buffer only once. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-11-30printf: Remove unused 'bprintf'Dr. David Alan Gilbert
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753 ("vsprintf: add binary printf") but as far as I can see was never used, unlike the other two functions in that patch. Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org Reviewed-by: Andy Shevchenko <andy@kernel.org> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-11-30Merge tag 'turbostat-2024.11.30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull turbostat updates from Len Brown: - assorted minor bug fixes - assorted platform specific tweaks - initial RAPL PSYS (SysWatt) support * tag 'turbostat-2024.11.30' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: 2024.11.30 tools/power turbostat: Add RAPL psys as a built-in counter tools/power turbostat: Fix child's argument forwarding tools/power turbostat: Force --no-perf in --dump mode tools/power turbostat: Add support for /sys/class/drm/card1 tools/power turbostat: Cache graphics sysfs file descriptors during probe tools/power turbostat: Consolidate graphics sysfs access tools/power turbostat: Remove unnecessary fflush() call tools/power turbostat: Enhance platform divergence description tools/power turbostat: Add initial support for GraniteRapids-D tools/power turbostat: Remove PC3 support on Lunarlake tools/power turbostat: Rename arl_features to lnl_features tools/power turbostat: Add back PC8 support on Arrowlake tools/power turbostat: Remove PC7/PC9 support on MTL tools/power turbostat: Honor --show CPU, even when even when num_cpus=1 tools/power turbostat: Fix trailing '\n' parsing tools/power turbostat: Allow using cpu device in perf counters on hybrid platforms tools/power turbostat: Fix column printing for PMT xtal_time counters tools/power turbostat: fix GCC9 build regression
2024-11-30Merge tag 'pci-v6.13-fixes-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI fix from Bjorn Helgaas: - When removing a PCI device, only look up and remove a platform device if there is an associated device node for which there could be a platform device, to fix a merge window regression (Brian Norris) * tag 'pci-v6.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: PCI/pwrctrl: Unregister platform device only if one actually exists
2024-11-30Merge tag 'lsm-pr-20241129' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull ima fix from Paul Moore: "One small patch to fix a function parameter / local variable naming snafu that went up to you in the current merge window" * tag 'lsm-pr-20241129' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: ima: uncover hidden variable in ima_match_rules()
2024-11-30Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linuxLinus Torvalds
Pull more block updates from Jens Axboe: - NVMe pull request via Keith: - Use correct srcu list traversal (Breno) - Scatter-gather support for metadata (Keith) - Fabrics shutdown race condition fix (Nilay) - Persistent reservations updates (Guixin) - Add the required bits for MD atomic write support for raid0/1/10 - Correct return value for unknown opcode in ublk - Fix deadlock with zone revalidation - Fix for the io priority request vs bio cleanups - Use the correct unsigned int type for various limit helpers - Fix for a race in loop - Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make it easier for actual humans to read - Fix potential UAF when iterating tags - A few fixes for bfq-iosched UAF issues - Fix for brd discard not decrementing the allocated page count - Various little fixes and cleanups * tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits) brd: decrease the number of allocated pages which discarded block, bfq: fix bfqq uaf in bfq_limit_depth() block: Don't allow an atomic write be truncated in blkdev_write_iter() mq-deadline: don't call req_get_ioprio from the I/O completion handler block: Prevent potential deadlock in blk_revalidate_disk_zones() block: Remove extra part pointer NULLify in blk_rq_init() nvme: tuning pr code by using defined structs and macros nvme: introduce change ptpl and iekey definition block: return bool from get_disk_ro and bdev_read_only block: remove a duplicate definition for bdev_read_only block: return bool from blk_rq_aligned block: return unsigned int from blk_lim_dma_alignment_and_pad block: return unsigned int from queue_dma_alignment block: return unsigned int from bdev_io_opt block: req->bio is always set in the merge code block: don't bother checking the data direction for merges block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()" md/raid10: Atomic write support md/raid1: Atomic write support ...
2024-11-30Merge tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linuxLinus Torvalds
Pull more io_uring updates from Jens Axboe: - Remove a leftover struct from when the cqwait registered waiting was transitioned to regions. - Fix for an issue introduced in this merge window, where nop->fd might be used uninitialized. Ensure it's always set. - Add capping of the task_work run in local task_work mode, to prevent bursty and long chains from adding too much latency. - Work around xa_store() leaving ->head non-NULL if it encounters an allocation error during storing. Just a debug trigger, and can go away once xa_store() behaves in a more expected way for this condition. Not a major thing as it basically requires fault injection to trigger it. - Fix a few mapping corner cases - Fix KCSAN complaint on reading the table size post unlock. Again not a "real" issue, but it's easy to silence by just keeping the reading inside the lock that protects it. * tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux: io_uring/tctx: work around xa_store() allocation error issue io_uring: fix corner case forgetting to vunmap io_uring: fix task_work cap overshooting io_uring: check for overflows in io_pin_pages io_uring/nop: ensure nop->fd is always initialized io_uring: limit local tw done io_uring: add io_local_work_pending() io_uring/region: return negative -E2BIG in io_create_region() io_uring: protect register tracing io_uring: remove io_uring_cqwait_reg_arg
2024-11-30Merge tag 'dma-mapping-6.13-2024-11-30' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: - fix physical address calculation for struct dma_debug_entry (Fedor Pchelkin) * tag 'dma-mapping-6.13-2024-11-30' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: fix physical address calculation for struct dma_debug_entry
2024-11-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more kvm updates from Paolo Bonzini: - ARM fixes - RISC-V Svade and Svadu (accessed and dirty bit) extension support for host and guest * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM dt-bindings: riscv: Add Svade and Svadu Entries RISC-V: Add Svade and Svadu Extensions Support KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition KVM: arm64: vgic: Make vgic_get_irq() more robust KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
2024-11-30Merge tag 'sh-for-v6.13-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux Pull sh updates from John Paul Adrian Glaubitz: "Two small fixes. The first one by Huacai Chen addresses a runtime warning when CONFIG_CPUMASK_OFFSTACK and CONFIG_DEBUG_PER_CPU_MAPS are selected which occurs because the cpuinfo code on sh incorrectly uses NR_CPUS when iterating CPUs instead of the runtime limit nr_cpu_ids. A second fix by Dan Carpenter fixes a use-after-free bug in register_intc_controller() which occurred as a result of improper error handling in the interrupt controller driver code when registering an interrupt controller during plat_irq_setup() on sh" * tag 'sh-for-v6.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux: sh: intc: Fix use-after-free bug in register_intc_controller() sh: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
2024-11-30Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Deselect ARCH_CORRECT_STACKTRACE_ON_KRETPROBE so that tests depending on it don't run (and fail) on arm64 - Fix lockdep assert in the Arm SMMUv3 PMU driver - Fix the port and device ID bits setting in the Arm CMN perf driver * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: perf/arm-cmn: Ensure port and device id bits are set properly perf/arm-smmuv3: Fix lockdep assert in ->event_init() arm64: disable ARCH_CORRECT_STACKTRACE_ON_KRETPROBE tests
2024-11-30tools/power turbostat: 2024.11.30Len Brown
since 2024.07.26: assorted minor bug fixes assorted platform specific tweaks initial RAPL PSYS (SysWatt) support Signed-off-by: Len Brown <len.brown@intel.com>
2024-11-30tools/power turbostat: Add RAPL psys as a built-in counterPatryk Wlazlyn
Introduce the counter as a part of global, platform counters structure. We open the counter for only one cpu, but otherwise treat it as an ordinary RAPL counter, allowing for grouped perf read. The counter is disabled by default, because it's interpretation may require additional, platform specific information, making it unsuitable for general use. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-11-30tools/power turbostat: Fix child's argument forwardingPatryk Wlazlyn
Add '+' to optstring when early scanning for --no-msr and --no-perf. It causes option processing to stop as soon as a nonoption argument is encountered, effectively skipping child's arguments. Fixes: 3e4048466c39 ("tools/power turbostat: Add --no-msr option") Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-11-30tools/power turbostat: Force --no-perf in --dump modePatryk Wlazlyn
Force the --no-perf early to prevent using it as a source. User asks for raw values, but perf returns them relative to the opening of the file descriptor. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-11-30tools/power turbostat: Add support for /sys/class/drm/card1Zhang Rui
On some machines, the graphics device is enumerated as /sys/class/drm/card1 instead of /sys/class/drm/card0. The current implementation does not handle this scenario, resulting in the loss of graphics C6 residency and frequency information. Add support for /sys/class/drm/card1, ensuring that turbostat can retrieve and display the graphics columns for these platforms. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-11-30tools/power turbostat: Cache graphics sysfs file descriptors during probeZhang Rui
Snapshots of the graphics sysfs knobs are taken based on file descriptors. To optimize this process, open the files and cache the file descriptors during the graphics probe phase. As a result, the previously cached pathnames become redundant and are removed. This change aims to streamline the code without altering its functionality. No functional change intended. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-11-30tools/power turbostat: Consolidate graphics sysfs accessZhang Rui
Currently, there is an inconsistency in how graphics sysfs knobs are accessed: graphics residency sysfs knobs are opened and closed for each read, while graphics frequency sysfs knobs are opened once and remain open until turbostat exits. This inconsistency is confusing and adds unnecessary code complexity. Consolidate the access method by opening the sysfs files once and reusing the file pointers for subsequent accesses. This approach simplifies the code and ensures a consistent method for accessing graphics sysfs knobs. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-11-30tools/power turbostat: Remove unnecessary fflush() callZhang Rui
The graphics sysfs knobs are read-only, making the use of fflush() before reading them redundant. Remove the unnecessary fflush() call. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
generated by cgit (git 2.34.1) at 2025-09-08 13:59:23 +0000