summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-03-17rtw89: 8852c: add read/write rf register functionChung-Hsuan Hung
Using encoded address which BIT(16) is used to discriminate which region is going to access. Illustrate the calling flow as below rtw89_phy_write_rf_v1() -+-> rtw89_phy_write_rf() // old interface +-> rtw89_phy_write_rf_a() // new interface Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-5-pkshih@realtek.com
2022-03-17rtw89: 8852c: add setting of TB UL TX power offsetYuan-Han Zhang
Configure this TX power to indicate TX power offset that uses to transmit TB (trigger base) uplink frames. Also, shrink the unit of TX power offset changes to suitable type s8. Signed-off-by: Yuan-Han Zhang <yuanhan1020@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-4-pkshih@realtek.com
2022-03-17rtw89: 8852c: add write/read crystal function in CFO trackingYuan-Han Zhang
The CFO tracking algorithm is the same, but control methods are different. Set parameters via xtal serial interfaces (SI). Signed-off-by: Yuan-Han Zhang <yuanhan1020@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-3-pkshih@realtek.com
2022-03-17rtw89: modify dcfo_comp to share with chipsYuan-Han Zhang
The dcfo_comp is digital CFO (central frequency offset) compensation. Since the flow can be shared with all chips, add chip parameters to support variant register address and format. Signed-off-by: Yuan-Han Zhang <yuanhan1020@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220317055543.40514-2-pkshih@realtek.com
2022-03-17rtw89: Fix spelling mistake "Mis-Match" -> "Mismatch"Colin Ian King
There are some spelling mistakes in some literal strings. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220316234242.55515-1-colin.i.king@gmail.com
2022-03-17brcmfmac: p2p: Fix spelling mistake "Comback" -> "Comeback"Colin Ian King
There are some spelling mistakes in comments and brcmf_dbg messages. Fix these. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220316233938.55135-1-colin.i.king@gmail.com
2022-03-17iwlwifi: mei: fix building iwlmeiArnd Bergmann
Building iwlmei without CONFIG_CFG80211 causes a link-time warning: ld.lld: error: undefined symbol: ieee80211_hdrlen >>> referenced by net.c >>> net/wireless/intel/iwlwifi/mei/net.o:(iwl_mei_tx_copy_to_csme) in archive drivers/built-in.a Add an explicit dependency to avoid this. In theory it should not be needed here, but it also seems pointless to allow IWLMEI for configurations without CFG80211. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Emmanuel Grumbach <Emmanuel.grumbach@intel.com> Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220316183617.1470631-1-arnd@kernel.org
2022-03-17cpufreq: powernow-k8: Re-order the init checksMario Limonciello
The powernow-k8 driver will do checks at startup that the current active driver is acpi-cpufreq and show a warning when they're not expected. Because of this the following warning comes up on systems that support amd-pstate and compiled in both drivers: `WTF driver: amd-pstate` The systems that support powernow-k8 will not support amd-pstate, so re-order the checks to validate the CPU model number first to avoid this warning being displayed on modern SOCs. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-17ACPI: bus: Avoid using CPPC if not supported by firmwareRafael J. Wysocki
If the platform firmware indicates that it does not support CPPC by clearing the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits in the platform _OSC capabilities mask, avoid attempting to evaluate _CPC which may fail in that case. Because the OSC_SB_CPC_SUPPORT and OSC_SB_CPCV2_SUPPORT bits are only added to the supported platform capabilities mask on x86, when X86_FEATURE_HWP is supported, allow _CPC to be evaluated regardless in the other cases. Link: https://lore.kernel.org/linux-acpi/CAJZ5v0i=ecAksq0TV+iLVObm-=fUfdqPABzzkgm9K6KxO1ZCcg@mail.gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-03-17Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query ↵Rafael J. Wysocki
flag" Revert commit 159d8c274fd9 ("ACPI: Pass the same capabilities to the _OSC regardless of the query flag") which caused legitimate usage scenarios (when the platform firmware does not want the OS to control certain platform features controlled by the system bus scope _OSC) to break and was misguided by some misleading language in the _OSC definition in the ACPI specification (in particular, Section 6.2.11.1.3 "Sequence of _OSC Calls" that contradicts other perts of the _OSC definition). Link: https://lore.kernel.org/linux-acpi/CAJZ5v0iStA0JmO0H3z+VgQsVuQONVjKPpw0F5HKfiq=Gb6B5yw@mail.gmail.com Reported-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-03-17cpuidle: intel_idle: Drop redundant backslash at line endRafael J. Wysocki
Drop a redundant backslash character at the end of a line in the spr_cstates[] definition. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2022-03-17cpuidle: intel_idle: Update intel_idle() kerneldoc commentRafael J. Wysocki
Commit bf9282dc26e7 ("cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic") moved the leave_mm() call away from intel_idle(), but it didn't update its kerneldoc comment accordingly, so do that now. Fixes: bf9282dc26e7 ("cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-17ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNUWerner Sembach
Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working native and video interface. However the default detection mechanism first registers the video interface before unregistering it again and switching to the native interface during boot. This results in a dangling SBIOS request for backlight change for some reason, causing the backlight to switch to ~2% once per boot on the first power cord connect or disconnect event. Setting the native interface explicitly circumvents this buggy behaviour by avoiding the unregistering process. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-03-17netfilter: nf_tables: validate registers coming from userspace.Pablo Neira Ayuso
Bail out in case userspace uses unsupported registers. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-03-17net: stmmac: clean up impossible conditionDan Carpenter
This code works but it has a static checker warning: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1687 init_dma_rx_desc_rings() warn: always true condition '(queue >= 0) => (0-u32max >= 0)' Obviously, it makes no sense to check if an unsigned int is >= 0. What prevents this code from being a forever loop is that later there is a separate check for if (queue == 0). The "queue" variable is less than MTL_MAX_RX_QUEUES (8) so it can easily fit in an int type. Any larger value for "queue" would lead to an array overflow when we assign "rx_q = &priv->rx_queue[queue]". Fixes: de0b90e52a11 ("net: stmmac: rearrange RX and TX desc init into per-queue basis") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220316083744.GB30941@kili Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17net: dsa: Add missing of_node_put() in dsa_port_parse_ofMiaoqian Lin
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 6d4e5c570c2d ("net: dsa: get port type at parse time") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17net: geneve: support IPv4/IPv6 as inner protocolEyal Birger
This patch adds support for encapsulating IPv4/IPv6 within GENEVE. In order to use this, a new IFLA_GENEVE_INNER_PROTO_INHERIT flag needs to be provided at device creation. This property cannot be changed for the time being. In case IP traffic is received on a non-tun device the drop count is increased. Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Link: https://lore.kernel.org/r/20220316061557.431872-1-eyal.birger@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERSThomas Zimmermann
Fix a number of undefined references to drm_kms_helper.ko in drm_dp_helper.ko: arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state': drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work': drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work': drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event' arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work': drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event' This happens if panel-edp.ko has been configured with DRM_PANEL_EDP=y DRM_DP_HELPER=y DRM_KMS_HELPER=m which builds DP helpers into the kernel and KMS helpers sa a module. Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem. To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers cannot be selected directly by the user, config symbols should avoid depending on it anyway. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP") Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Brian Masney <bmasney@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Linux Kernel Functional Testing <lkft@linaro.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/478296/
2022-03-17dt-bindings: mmc: renesas,sdhi: Document RZ/G2UL SoCBiju Das
Document RZ/G2UL SDHI bindings. RZ/G2UL SDHI is almost identical to one found on the R-Car Gen3. No driver changes are required as generic compatible string "renesas,rcar-gen3-sdhi" will be used as a fallback. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220315153258.21097-1-biju.das.jz@bp.renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-17Merge drm/drm-fixes into drm-misc-fixesThomas Zimmermann
Backmerging drm/drm-fixes for commit 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP"). Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2022-03-17Merge branch 'net-mvneta-armada-98dx2530-soc'Paolo Abeni
Chris Packham says: ==================== net: mvneta: Armada 98DX2530 SoC This is split off from [1] to let it go in via net-next rather than waiting for the rest of the series to land. [1] - https://lore.kernel.org/lkml/20220314213143.2404162-1-chris.packham@alliedtelesis.co.nz/ ==================== Link: https://lore.kernel.org/r/20220315215207.2746793-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17net: mvneta: Add support for 98DX2530 Ethernet portChris Packham
The 98DX2530 SoC is similar to the Armada 3700 except it needs a different MBUS window configuration. Add a new compatible string to identify this device and the required MBUS window configuration. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17dt-bindings: net: mvneta: Add marvell,armada-ac5-netaChris Packham
The out of band port on the 98DX2530 SoC is similar to the armada-3700 except it requires a slightly different MBUS window configuration. Add a new compatible string so this difference can be accounted for. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17ptp: ocp: Fix PTP_PF_* verification requestsJonathan Lemon
Update and check functionality for pin configuration requests: PTP_PF_NONE: requests "IN: None", disabling the pin. # testptp -d /dev/ptp3 -L3,0 -i1 set pin function okay # cat sma4 IN: None PTP_PF_EXTTS: should configure external timestamps, but since the timecard can steer inputs to multiple inputs as well as timestamps, allow the request, but don't change configurations. # testptp -d /dev/ptp3 -L3,1 -i1 set pin function okay (no functional or configuration change here yet) PTP_PF_PEROUT: Channel 0 is the PHC, at 1PPS. Channels 1-4 are the programmable frequency generators. # fails because period is not 1PPS. # testptp -d /dev/ptp3 -L3,2 -i0 -p 500000000 PTP_PEROUT_REQUEST: Invalid argument # testptp -d /dev/ptp3 -L3,2 -i0 -p 1000000000 periodic output request okay # cat sma4 OUT: PHC # testptp -d /dev/ptp3 -L3,2 -i1 -p 500000000 -w 200000000 periodic output request okay # cat sma4 OUT: GEN1 # cat gen1/signal 500000000 40 0 1 2022-03-10T23:55:26 TAI # cat gen1/running 1 # testptp -d /dev/ptp3 -L3,2 -i1 -p 0 periodic output request okay # cat gen1/running 0 Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Link: https://lore.kernel.org/r/20220315194626.1895-1-jonathan.lemon@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-03-17ARM: remove support for NOMMU ARMv4/v5Arnd Bergmann
It is possible to build MMU-less kernels for Cortex-M base microcrontrollers as well as a couple of older platforms that have not been converted to CONFIG_ARCH_MULTIPLATFORM, specifically ep93xx, footbridge, dove, sa1100 and s3c24xx. It seems unlikely that anybody has tested those configurations in recent years, as even building them is frequently broken. A patch I submitted caused another build time regression in this configuration. I sent a patch for that, but it seems better to also remove the option entirely, leaving ARMv7-M as the only supported Arm NOMMU target for simplicity. A couple of platforms have dependencies on CONFIG_MMU, those can all be removed now. Notably, mach-integrator tries to support MMU-less CPU cores, but those have not actually been selectable for a long time. This addresses several build failures in randconfig builds that have accumulated over the years. Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Russell King <linux@armlinux.org.uk> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-03-16smb3: fix incorrect session setup check for multiuser mountsSteve French
A recent change to how the SMB3 server (socket) and session status is managed regressed multiuser mounts by changing the check for whether session setup is needed to the socket (TCP_Server_info) structure instead of the session struct (cifs_ses). Add additional check in cifs_setup_sesion to fix this. Fixes: 73f9bfbe3d81 ("cifs: maintain a state machine for tcp/smb/tcon sessions") Reported-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-03-16Merge branch 'flow_offload-add-tc-vlan-push_eth-and-pop_eth-actions'Jakub Kicinski
Roi Dayan says: ==================== flow_offload: add tc vlan push_eth and pop_eth actions Offloading vlan push_eth and pop_eth actions is needed in order to correctly offload MPLSoUDP encap and decap flows, this series extends the flow offload API to support these actions and updates mlx5 to parse them. ==================== Link: https://lore.kernel.org/r/20220315110211.1581468-1-roid@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16net/mlx5e: MPLSoUDP encap, support action vlan pop_eth explicitlyMaor Dickman
Currently the MPLSoUDP encap offload does the L2 pop implicitly while adding such action explicitly (vlan eth_push) will cause the rule to not be offloaded. Solve it by adding offload support for vlan eth_push in case of MPLSoUDP decap case. Flow example: filter root protocol ip pref 1 flower chain 0 filter root protocol ip pref 1 flower chain 0 handle 0x1 eth_type ipv4 dst_ip 2.2.2.22 src_ip 2.2.2.21 in_hw in_hw_count 1 action order 1: vlan pop_eth pipe index 1 ref 1 bind 1 used_hw_stats delayed action order 2: mpls push protocol mpls_uc label 555 tc 3 ttl 255 pipe index 1 ref 1 bind 1 used_hw_stats delayed action order 3: tunnel_key set src_ip 8.8.8.21 dst_ip 8.8.8.22 dst_port 6635 csum tos 0x4 ttl 6 pipe index 1 ref 1 bind 1 used_hw_stats delayed action order 4: mirred (Egress Redirect to device bareudp0) stolen index 1 ref 1 bind 1 used_hw_stats delayed Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16net/mlx5e: MPLSoUDP decap, use vlan push_eth instead of peditMaor Dickman
Currently action pedit of source and destination MACs is used to fill the MACs in L2 push step in MPLSoUDP decap offload, this isn't aligned to tc SW which use vlan eth_push action to do this. To fix that, offload support for vlan veth_push action is added together with mpls pop action, and deprecate the use of pedit of MACs. Flow example: filter protocol mpls_uc pref 1 flower chain 0 filter protocol mpls_uc pref 1 flower chain 0 handle 0x1 eth_type 8847 mpls_label 555 enc_dst_port 6635 in_hw in_hw_count 1 action order 1: tunnel_key unset pipe index 2 ref 1 bind 1 used_hw_stats delayed action order 2: mpls pop protocol ip pipe index 2 ref 1 bind 1 used_hw_stats delayed action order 3: vlan push_eth dst_mac de:a2:ec:d6:69:c8 src_mac de:a2:ec:d6:69:c8 pipe index 2 ref 1 bind 1 used_hw_stats delayed action order 4: mirred (Egress Redirect to device enp8s0f0_0) stolen index 2 ref 1 bind 1 used_hw_stats delayed Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16net/sched: add vlan push_eth and pop_eth action to the hardware IRMaor Dickman
Add vlan push_eth and pop_eth action to the hardware intermediate representation model which would subsequently allow it to be used by drivers for offload. Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()Nicolas Dichtel
This kind of interface doesn't have a mac header. This patch fixes bpf_redirect() to a PIM interface. Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16net: dsa: Never offload FDB entries on standalone portsTobias Waldekranz
If a port joins a bridge that it can't offload, it will fallback to standalone mode and software bridging. In this case, we never want to offload any FDB entries to hardware either. Previously, for host addresses, we would eventually end up in dsa_port_bridge_host_fdb_add, which would unconditionally dereference dp->bridge and cause a segfault. Fixes: c26933639b54 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220315233033.1468071-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16phy: Remove duplicated include in phy-fsl-lynx-28g.cYang Li
Fix following includecheck warning: ./drivers/phy/freescale/phy-fsl-lynx-28g.c: linux/workqueue.h is included more than once. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20220315235603.59481-1-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16net: mv643xx_eth: undo some opreations in mv643xx_eth_probeMinghao Chi
Cannot directly return platform_get_irq return irq, there are operations that need to be undone. Fixes: bf2b83425b59 ("net: mv643xx_eth: use platform_get_irq() instead of platform_get_resource()") Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220316012444.2126070-1-chi.minghao@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16net: hns3: Fix spelling mistake "does't" -> "doesn't"Colin Ian King
There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220315222914.2960786-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16gve: Fix spelling mistake "droping" -> "dropping"Colin Ian King
There is a spelling mistake in a netdev_warn warning. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220315222615.2960504-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16io_uring: fold evfd signalling under a slower pathPavel Begunkov
Add ->has_evfd flag, which is true IFF there is an eventfd attached, and use it to hide io_eventfd_signal() into __io_commit_cqring_flush() and combine fast checks in a single if. Also, gcc 11.2 wasn't inlining io_cqring_ev_posted() without this change, so helps with that as well. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/f6168471997decded475a063f92915787975a30b.1647481208.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16io_uring: thin down io_commit_cqring()Pavel Begunkov
io_commit_cqring() is currently always under spinlock section, so it's always better to keep it as slim as possible. Move __io_commit_cqring_flush() out of it into ev_posted*(). If fast checks do fail and this post-processing is required, we'll reacquire ->completion_lock, which is fine as we don't care about performance of draining and offset timeouts. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/ec4e81fd720d3bc7bca8cb9152e080dad1a052f1.1647481208.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16io_uring: shuffle io_eventfd_signal() bits aroundPavel Begunkov
A preparation patch, which moves a fast ->io_ev_fd check out of io_eventfd_signal() into ev_posted*(). Compilers are smart enough for it to not change anything, but will need it later. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/ec4091ac76d43912b73917e8db651c2dac4b7b01.1647481208.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16io_uring: remove extra barrier for non-sqpoll iopollPavel Begunkov
smp_mb() in io_cqring_ev_posted_iopoll() is only there because of waitqueue_active(). However, non-SQPOLL IOPOLL ring doesn't wake the CQ and so the barrier there is useless. Kill it, it's usually pretty expensive. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/d72e8ef6f7a3f6a72e18fad8409f7d47afc8da7d.1647481208.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16io_uring: fix provided buffer return on failure for kiocb_done()Pavel Begunkov
Use io_req_complete_failed() in kiocb_done(). This cleans up the code, but also ensures that a provided buffers is correctly freed on failure. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a4880106fcf199d5810707fe2d17126fcdf18bc4.1647481208.git.asml.silence@gmail.com [axboe: split from previous patch] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16io_uring: extend provided buf return to failsPavel Begunkov
It's never a good idea to put provided buffers without notifying the userspace, it'll lead to userspace leaks, so add io_put_kbuf() in io_req_complete_failed(). The fail helper is called by all sorts of requests, but it's still safe to do as io_put_kbuf() will return 0 in for all requests that don't support and so don't expect provided buffers. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a4880106fcf199d5810707fe2d17126fcdf18bc4.1647481208.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16net: ksz884x: optimize netdev_open flow and remove static variablewujunwen
remove the static next_jiffies variable, and reinitialize next_jiffies to simplify netdev_open Signed-off-by: wujunwen <wudaemon@163.com> Link: https://lore.kernel.org/r/20220315122857.78601-1-wudaemon@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16hamradio: Fix wrong assignment of 'bbc->cfg.loopback'Meng Tang
In file hamradio/baycom_epp.c, the baycom_setmode interface, there is a problem with improper use of strstr. Suppose that when modestr="noloopback", both conditions which are 'strstr(modestr,"noloopback")' and 'strstr(modestr,"loopback")' will be true(not NULL), this lead the bc->cfg.loopback variable will be first assigned to 0, and then reassigned to 1. This will cause 'bc->cfg.loopback = 0' will never take effect. That obviously violates the logic of the code, so adjust the order of their execution to solve the problem. Signed-off-by: Meng Tang <tangmeng@uniontech.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220315074851.6456-1-tangmeng@uniontech.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16bareudp: use ipv6_mod_enabled to check if IPv6 enabledHangbin Liu
bareudp_create_sock() use AF_INET6 by default if IPv6 CONFIG enabled. But if user start kernel with ipv6.disable=1, the bareudp sock will created failed, which cause the interface open failed even with ethertype ip. e.g. # ip link add bareudp1 type bareudp dstport 2 ethertype ip # ip link set bareudp1 up RTNETLINK answers: Address family not supported by protocol Fix it by using ipv6_mod_enabled() to check if IPv6 enabled. There is no need to check IS_ENABLED(CONFIG_IPV6) as ipv6_mod_enabled() will return false when CONFIG_IPV6 no enabled in include/linux/ipv6.h. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220315062618.156230-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16io_uring: refactor timeout cancellation cqe postingPavel Begunkov
io_fill_cqe*() is not always the best way to post CQEs just because there is enough of infrastructure on top. Replace a raw call to a variant of it inside of io_timeout_cancel(), which also saves us some bloating and might help with batching later. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/46113ec4345764b4aef3b384ce38cceabaeedcbb.1647481208.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16io_uring: normilise naming for fill_cqe*Pavel Begunkov
Restore consistency in __io_fill_cqe* like helpers, always honouring "io_" prefix and adding "req" when we're passing in a request. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/bd016ff5c1a4f74687828069d2619d8a65e0c6d7.1647481208.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16Merge tag 'linux-can-next-for-5.18-20220316' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2022-03-16 the first 3 patches are by Oliver Hartkopp target the CAN ISOTP protocol and fix a problem found by syzbot in isotp_bind(), return -EADDRNOTAVAIL in unbound sockets in isotp_recvmsg() and add support for MSG_TRUNC to isotp_recvmsg(). Amit Kumar Mahapatra converts the xilinx,can device tree bindings to yaml. The last patch is by Julia Lawall and fixes typos in the ucan driver. * tag 'linux-can-next-for-5.18-20220316' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: ucan: fix typos in comments dt-bindings: can: xilinx_can: Convert Xilinx CAN binding to YAML can: isotp: support MSG_TRUNC flag when reading from socket can: isotp: return -EADDRNOTAVAIL when reading from unbound socket can: isotp: sanitize CAN ID checks in isotp_bind() ==================== Link: https://lore.kernel.org/r/20220316204710.716341-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-16io_uring: cache poll/double-poll state with a request flagJens Axboe
With commit "io_uring: cache req->apoll->events in req->cflags" applied, we now have just io_poll_remove_entries() dipping into req->apoll when it isn't strictly necessary. Mark poll and double-poll with a flag, so we know if we need to look at apoll->double_poll. This avoids pulling in those cachelines if we don't need them. The common case is that the poll wake handler already removed these entries while hot off the completion path. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-16io_uring: cache req->apoll->events in req->cflagsJens Axboe
When we arm poll on behalf of a different type of request, like a network receive, then we allocate req->apoll as our poll entry. Running network workloads shows io_poll_check_events() as the most expensive part of io_uring, and it's all due to having to pull in req->apoll instead of just the request which we have hot already. Cache poll->events in req->cflags, which isn't used until the request completes anyway. This isn't strictly needed for regular poll, where req->poll.events is used and thus already hot, but for the sake of unification we do it all around. This saves 3-4% of overhead in certain request workloads. Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-15 04:13:53 +0000