| Age | Commit message (Collapse) | Author |
|---|
|
Rely on btmtk module to reduce duplicated code
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Chicony Electronics BT device with 04f2:b49f seems to be a missing
entry for Realtek RTL8723BE.
T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04f2 ProdID=b49f Rev= 2.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1196779
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Variable cur_len is being ininitialized with a value in the start of
a for-loop but this is never read, it is being re-assigned a new value
on the first statement in the for-loop. The initialization is redundant
and can be removed.
Cleans up clang scan build warning:
net/bluetooth/mgmt.c:7958:14: warning: Although the value stored to 'cur_len'
is used in the enclosing expression, the value is never actually read
from 'cur_len' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
|
|
Merge ACPICA changes, ACPI OS-layer changes, ACPI bus-type and _OSC
support changes and ACPI tables parsing changes for 5.18-rc1:
- Use uintptr_t and offsetof() in the ACPICA code to avoid compiler
warnings regarding NULL pointer arithmetic (Rafael Wysocki).
- Fix possible NULL pointer dereference in acpi_ns_walk_namespace()
when passed "acpi=off" in the command line (Rafael Wysocki).
- Fix and clean up acpi_os_read/write_port() (Rafael Wysocki).
- Introduce acpi_bus_for_each_dev() and use it for walking all ACPI
device objects in the Type C code (Rafael Wysocki).
- Fix the _OSC platform capabilities negotioation and prevent CPPC
from being used if the platform firmware indicates that it not
supported via _OSC (Rafael Wysocki).
- Add AGDI and CEDT to the list of known ACPI table signatures (Ilkka
Koskinen, Robert Kiraly).
* acpica:
ACPICA: Avoid walking the ACPI Namespace if it is not there
ACPICA: Use uintptr_t and offsetof() in Linux kernel builds
* acpi-osl:
ACPI: OSL: Fix and clean up acpi_os_read/write_port()
* acpi-bus:
ACPI: bus: Avoid using CPPC if not supported by firmware
Revert "ACPI: Pass the same capabilities to the _OSC regardless of the query flag"
ACPI: bus: Introduce acpi_bus_for_each_dev()
* acpi-tables:
ACPI: tables: Add AGDI to the list of known table signatures
ACPI: tables: Add CEDT signature to the list of known tables
|
|
The data transfer routines must poll the status register to
determine when more data can be shifted in or out. If the hardware
gets into a bad state, these polling loops may never exit. Prevent
this by returning an error if a timeout is exceeded.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220317211426.38940-1-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support from RPMH regulators found in SDX65 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1647410837-22537-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add PMX65 compatibles for PMIC found in SDX65 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1647410837-22537-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Shengjiu has been actively working on latest FSL platforms and
keeping upstream effort as well, while I have been working on
other subsystem lately and cannot guarantee audio patch review
in the near term. So replacing with him in the maintainer list.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20220317041806.28230-1-nicoleotsuka@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This will help make the code for getting the mclk and bclk IPC specific.
Add the implementation for IPC3 as well.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-20-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce two new ops, set_up_all_pipelines and tear_down_all_pipelines
in struct ipc_tplg_ops and define these for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-19-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This will be used in IPC3-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-18-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define the dai_link_fixup PCM op for IPC3 and use it
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-17-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the trigger PCM op for IPC3 and use it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-16-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the hw_params op for IPC3 and use it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-15-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the IPC3 PCM ops, define the hw_free op and modify all users to use
the op.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-14-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It will be used in IPC-specific code.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-13-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce the IPC-specific PCM ops that will be used to abstract the
PCM related IPC's.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-12-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the get/put/volatile_get control IPC ops for byte
controls for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-11-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the bytes_get/put IPC control ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-10-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the enum_get/put control IPC ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-9-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the switch_get/put control IPC ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-8-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define and set the volume_get/put control IPC ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-7-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Define the topology control IPC ops for IPC3, implement the
control_notify op and use it.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-6-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce IPC-specific ops for kcontrol IO in struct ipc_tplg_ops.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-5-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a new set of IPC ops for PM with the ctx_save and ctx_restore ops
for suspend/resume and implement the ops for IPC3.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add 3 new topology IPC ops for widget_setup, widget_free and dai_config
in order to make the pipeline management code IPC agnostic and implement
the ops for IPC3.
Use the newly introduced tplg dai_config op to configure the DAI during
BE DAI hw_params and hw_free.
Also, in preparation for IPC4, modify BE hw_params callback to skip
setting up the DAI widget. All widgets will be set up during FW
hw_params and the DAI_CONFIG IPC should be sent only if the widget
use_count is > 0. With setting up/freeing removed from the BE hw_params,
remove the configured flag as it is no longer needed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-3-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For dynamic pipelines, We set up the DAI widget during BE DAI hw_params
and this results in it getting set up before the scheduler widget for the
pipeline it belongs to is set up. Move the scheduler widget set up into
sof_widget_setup() to ensure that the scheduler widget is always the first
widget in a pipeline to be set up and the last one to get freed after all
the other widgets have been freed.
Fixes: 5fcdbb2d45df ('ASoC: SOF: Add support for dynamic pipelines')
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220317175044.1752400-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Throttled bios can't be issued after del_gendisk() is done, thus
it's better to cancel them immediately rather than waiting for
throttle is done.
For example, if user thread is throttled with low bps while it's
issuing large io, and the device is deleted. The user thread will
wait for a long time for io to return.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220318130144.1066064-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the whole lifetime of blkcg_gq instance, ->q will be referred, such
as, ->pd_free_fn() is called in blkg_free, and throtl_pd_free() still
may touch the request queue via &tg->service_queue.pending_timer which
is handled by throtl_pending_timer_fn(), so it is reasonable to grab
request queue's refcnt by blkcg_gq instance.
Previously blkcg_exit_queue() is called from blk_release_queue, and it
is hard to avoid the use-after-free. But recently commit 1059699f87eb ("block:
move blkcg initialization/destroy into disk allocation/release handler")
is merged to for-5.18/block, it becomes simple to fix the issue by simply
grabbing request queue's refcnt.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220318130144.1066064-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In throtl_pending_timer_fn(), request queue is retrieved from throttle
data. And tg's pending timer is deleted synchronously when releasing the
associated blkg, at that time, throttle data may have been freed since
commit 1059699f87eb ("block: move blkcg initialization/destroy into disk
allocation/release handler") moves freeing q->td to disk_release() from
blk_release_queue(). So use-after-free on q->td in throtl_pending_timer_fn
can be triggered.
Fixes the issue by:
- do nothing in case that disk is released, when there isn't any bio to
dispatch
- retrieve request queue from blkg instead of throttle data for
non top-level pending timer.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220318130144.1066064-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add test where sender sends two message, each with own
data pattern. Reader tries to read first to broken buffer:
it has three pages size, but middle page is unmapped. Then,
reader tries to read second message to valid buffer. Test
checks, that uncopied part of first message was dropped
and thus not copied as part of second message.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test for receive timeout check: connection is established,
receiver sets timeout, but sender does nothing. Receiver's
'read()' call must return EAGAIN.
Signed-off-by: Krasnov Arseniy Vladimirovich <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v5.18
Third set of patches for v5.18. Smaller set this time, support for
mt7921u and some work on MBSSID support. Also a workaround for rfkill
userspace event.
Major changes:
mac80211
* MBSSID beacon handling in AP mode
rfkill
* make new event layout opt-in to workaround buggy user space
rtlwifi
* support On Networks N150 device id
mt76
* mt7915: MBSSID and 6 GHz band support
* new driver mt7921u
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Sitnicki says:
====================
I think we have reached a consensus [1] on how the test for the 4-byte load from
bpf_sock->dst_port and bpf_sk_lookup->remote_port should look, so here goes v3.
I will submit a separate set of patches for bpf_sk_lookup->remote_port tests.
This series has been tested on x86_64 and s390 on top of recent bpf-next -
ad13baf45691 ("selftests/bpf: Test subprog jit when toggle bpf_jit_harden
repeatedly").
[1] https://lore.kernel.org/bpf/87k0cwxkzs.fsf@cloudflare.com/
v2 -> v3:
- Split what was previously patch 2 which was doing two things
- Use BPF_TCP_* constants (Martin)
- Treat the result of 4-byte load from dst_port as a 16-bit value (Martin)
- Typo fixup and some rewording in patch 4 description
v1 -> v2:
- Limit read_sk_dst_port only to client traffic (patch 2)
- Make read_sk_dst_port pass on litte- and big-endian (patch 3)
v1: https://lore.kernel.org/bpf/20220225184130.483208-1-jakub@cloudflare.com/
v2: https://lore.kernel.org/bpf/20220227202757.519015-1-jakub@cloudflare.com/
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The check for 4-byte load from dst_port offset into bpf_sock is failing on
big-endian architecture - s390. The bpf access converter rewrites the
4-byte load to a 2-byte load from sock_common at skc_dport offset, as shown
below.
* s390 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 51966 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* s390 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
35: (69) r1 = *(u16 *)(r1 +12)
36: (bc) w1 = w1
37: (b4) w0 = 1
38: (16) if w1 == 0xcafe goto pc+1
39: (b4) w0 = 0
40: (95) exit
* x86_64 / llvm-objdump -S --no-show-raw-insn
00000000000002a0 <sk_dst_port__load_word>:
84: r1 = *(u32 *)(r1 + 48)
85: w0 = 1
86: if w1 == 65226 goto +1 <LBB5_2>
87: w0 = 0
00000000000002c0 <LBB5_2>:
88: exit
* x86_64 / bpftool prog dump xlated
_Bool sk_dst_port__load_word(struct bpf_sock * sk):
33: (69) r1 = *(u16 *)(r1 +12)
34: (b4) w0 = 1
35: (16) if w1 == 0xfeca goto pc+1
36: (b4) w0 = 0
37: (95) exit
This leads to surprises if we treat the destination register contents as a
32-bit value, ignoring the fact that in reality it contains a 16-bit value.
On little-endian the register contents reflect the bpf_sock struct
definition, where the lower 16-bits contain the port number:
struct bpf_sock {
...
__be16 dst_port; /* offset 48 */
__u16 :16;
...
};
However, on big-endian the register contents suggest that field the layout
of bpf_sock struct is as so:
struct bpf_sock {
...
__u16 :16; /* offset 48 */
__be16 dst_port;
...
};
Account for this quirky access conversion in the test case exercising the
4-byte load by treating the result as 16-bit wide.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-5-jakub@cloudflare.com
|
|
Replace magic numbers in BPF code with constants from bpf.h, so that they
don't require an explanation in the comments.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-4-jakub@cloudflare.com
|
|
cgroup_skb/egress programs which sock_fields test installs process packets
flying in both directions, from the client to the server, and in reverse
direction.
Recently added dst_port check relies on the fact that destination
port (remote peer port) of the socket which sends the packet is known ahead
of time. This holds true only for the client socket, which connects to the
known server port.
Filter out any traffic that is not egressing from the client socket in the
BPF program that tests reading the dst_port.
Fixes: 8f50f16ff39d ("selftests/bpf: Extend verifier and bpf_sock tests for dst_port loads")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-3-jakub@cloudflare.com
|
|
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa477 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
|
|
The '.type' field is initialized both in place and in the macro
as reported by this W=1 warning:
arch/arm64/include/asm/cpufeature.h:281:9: error: initialized field overwritten [-Werror=override-init]
281 | (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
| ^
arch/arm64/kernel/cpu_errata.c:136:17: note: in expansion of macro 'ARM64_CPUCAP_LOCAL_CPU_ERRATUM'
136 | .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM, \
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:145:9: note: in expansion of macro 'ERRATA_MIDR_RANGE'
145 | ERRATA_MIDR_RANGE(m, var, r_min, var, r_max)
| ^~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:613:17: note: in expansion of macro 'ERRATA_MIDR_REV_RANGE'
613 | ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
| ^~~~~~~~~~~~~~~~~~~~~
arch/arm64/include/asm/cpufeature.h:281:9: note: (near initialization for 'arm64_errata[18].type')
281 | (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
| ^
Remove the extranous initializer.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1dd498e5e26a ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
Link: https://lore.kernel.org/r/20220316183800.1546731-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220318103729.157574-24-Julia.Lawall@inria.fr
|
|
We currently deal with a set of booleans for VM features,
while they could be better represented as set of flags
contained in an unsigned long, similarily to what we are
doing on the CPU side.
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Oliver: Flag-ify the 'ran_once' boolean]
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220311174001.605719-2-oupton@google.com
|
|
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
The __setup() handler interface isn't meant to handle negative return
values -- they are non-zero, so they mean "handled" (like a return
value of 1 does), but that's just a quirk. So return 1 from
parse_pmtmr(). Also print a warning message if kstrtouint() returns
an error.
Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:
arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
return (char *)TRAMP_VALIAS + SZ_2K * slot;
Change the addition to something clang does not complain about.
Fixes: bd09128d16fa ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Kuniyuki Iwashima says:
====================
af_unix: Fix some OOB implementation.
This series fixes some data-races and adds a missing feature around the
commit 314001f0bf92 ("af_unix: Add OOB support").
Changelog:
- v3:
- Add the first patch
- v2: https://lore.kernel.org/netdev/20220315054801.72035-1-kuniyu@amazon.co.jp/
- Add READ_ONCE() to avoid a race reported by KCSAN (Eric)
- Add IS_ENABLED(CONFIG_AF_UNIX_OOB) (Shoaib)
- v1: https://lore.kernel.org/netdev/20220314052110.53634-1-kuniyu@amazon.co.jp/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The commit 314001f0bf92 ("af_unix: Add OOB support") introduced OOB for
AF_UNIX, but it lacks some changes for POLLPRI. Let's add the missing
piece.
In the selftest, normal datagrams are sent followed by OOB data, so this
commit replaces `POLLIN | POLLPRI` with just `POLLPRI` in the first test
case.
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Out-of-band data automatically places a "mark" showing wherein the
sequence the out-of-band data would have been. If the out-of-band data
implies cancelling everything sent so far, the "mark" is helpful to flush
them. When the socket's read pointer reaches the "mark", the ioctl() below
sets a non zero value to the arg `atmark`:
The out-of-band data is queued in sk->sk_receive_queue as well as ordinary
data and also saved in unix_sk(sk)->oob_skb. It can be used to test if the
head of the receive queue is the out-of-band data meaning the socket is at
the "mark".
While testing that, unix_ioctl() reads unix_sk(sk)->oob_skb locklessly.
Thus, all accesses to oob_skb need some basic protection to avoid
load/store tearing which KCSAN detects when these are called concurrently:
- ioctl(fd_a, SIOCATMARK, &atmark, sizeof(atmark))
- send(fd_b_connected_to_a, buf, sizeof(buf), MSG_OOB)
BUG: KCSAN: data-race in unix_ioctl / unix_stream_sendmsg
write to 0xffff888003d9cff0 of 8 bytes by task 175 on cpu 1:
unix_stream_sendmsg (net/unix/af_unix.c:2087 net/unix/af_unix.c:2191)
sock_sendmsg (net/socket.c:705 net/socket.c:725)
__sys_sendto (net/socket.c:2040)
__x64_sys_sendto (net/socket.c:2048)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
read to 0xffff888003d9cff0 of 8 bytes by task 176 on cpu 0:
unix_ioctl (net/unix/af_unix.c:3101 (discriminator 1))
sock_do_ioctl (net/socket.c:1128)
sock_ioctl (net/socket.c:1242)
__x64_sys_ioctl (fs/ioctl.c:52 fs/ioctl.c:874 fs/ioctl.c:860 fs/ioctl.c:860)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:113)
value changed: 0xffff888003da0c00 -> 0xffff888003da0d00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 176 Comm: unix_race_oob_i Not tainted 5.17.0-rc5-59529-g83dc4c2af682 #12
Hardware name: Red Hat KVM, BIOS 1.11.0-2.amzn2 04/01/2014
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a race between reset and the transmit paths that can lead to
ibmvnic_xmit() accessing an scrq after it has been freed in the reset
path. It can result in a crash like:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000016189f8
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c0080000016189f8] ibmvnic_xmit+0x60/0xb60 [ibmvnic]
LR [c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
Call Trace:
[c008000001618f08] ibmvnic_xmit+0x570/0xb60 [ibmvnic] (unreliable)
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c9cfcc] sch_direct_xmit+0xec/0x330
[c000000000bfe640] __dev_xmit_skb+0x3a0/0x9d0
[c000000000c00ad4] __dev_queue_xmit+0x394/0x730
[c008000002db813c] __bond_start_xmit+0x254/0x450 [bonding]
[c008000002db8378] bond_start_xmit+0x40/0xc0 [bonding]
[c000000000c0046c] dev_hard_start_xmit+0x11c/0x280
[c000000000c00ca4] __dev_queue_xmit+0x564/0x730
[c000000000cf97e0] neigh_hh_output+0xd0/0x180
[c000000000cfa69c] ip_finish_output2+0x31c/0x5c0
[c000000000cfd244] __ip_queue_xmit+0x194/0x4f0
[c000000000d2a3c4] __tcp_transmit_skb+0x434/0x9b0
[c000000000d2d1e0] __tcp_retransmit_skb+0x1d0/0x6a0
[c000000000d2d984] tcp_retransmit_skb+0x34/0x130
[c000000000d310e8] tcp_retransmit_timer+0x388/0x6d0
[c000000000d315ec] tcp_write_timer_handler+0x1bc/0x330
[c000000000d317bc] tcp_write_timer+0x5c/0x200
[c000000000243270] call_timer_fn+0x50/0x1c0
[c000000000243704] __run_timers.part.0+0x324/0x460
[c000000000243894] run_timer_softirq+0x54/0xa0
[c000000000ea713c] __do_softirq+0x15c/0x3e0
[c000000000166258] __irq_exit_rcu+0x158/0x190
[c000000000166420] irq_exit+0x20/0x40
[c00000000002853c] timer_interrupt+0x14c/0x2b0
[c000000000009a00] decrementer_common_virt+0x210/0x220
--- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
The immediate cause of the crash is the access of tx_scrq in the following
snippet during a reset, where the tx_scrq can be either NULL or an address
that will soon be invalid:
ibmvnic_xmit()
{
...
tx_scrq = adapter->tx_scrq[queue_num];
txq = netdev_get_tx_queue(netdev, queue_num);
ind_bufp = &tx_scrq->ind_buf;
if (test_bit(0, &adapter->resetting)) {
...
}
But beyond that, the call to ibmvnic_xmit() itself is not safe during a
reset and the reset path attempts to avoid this by stopping the queue in
ibmvnic_cleanup(). However just after the queue was stopped, an in-flight
ibmvnic_complete_tx() could have restarted the queue even as the reset is
progressing.
Since the queue was restarted we could get a call to ibmvnic_xmit() which
can then access the bad tx_scrq (or other fields).
We cannot however simply have ibmvnic_complete_tx() check the ->resetting
bit and skip starting the queue. This can race at the "back-end" of a good
reset which just restarted the queue but has not cleared the ->resetting
bit yet. If we skip restarting the queue due to ->resetting being true,
the queue would remain stopped indefinitely potentially leading to transmit
timeouts.
IOW ->resetting is too broad for this purpose. Instead use a new flag
that indicates whether or not the queues are active. Only the open/
reset paths control when the queues are active. ibmvnic_complete_tx()
and others wake up the queue only if the queue is marked active.
So we will have:
A. reset/open thread in ibmvnic_cleanup() and __ibmvnic_open()
->resetting = true
->tx_queues_active = false
disable tx queues
...
->tx_queues_active = true
start tx queues
B. Tx interrupt in ibmvnic_complete_tx():
if (->tx_queues_active)
netif_wake_subqueue();
To ensure that ->tx_queues_active and state of the queues are consistent,
we need a lock which:
- must also be taken in the interrupt path (ibmvnic_complete_tx())
- shared across the multiple queues in the adapter (so they don't
become serialized)
Use rcu_read_lock() and have the reset thread synchronize_rcu() after
updating the ->tx_queues_active state.
While here, consolidate a few boolean fields in ibmvnic_adapter for
better alignment.
Based on discussions with Brian King and Dany Madden.
Fixes: 7ed5b31f4a66 ("net/ibmvnic: prevent more than one thread from running in reset")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
When the parameter changes fails, we don't need to keep the old
temporary buffers. Release those (and plugin instances) upon errors
for reducing dead memory footprint. Since we always call it at the
exit of snd_pcm_oss_changes_params_locked(), the explicit calls of
snd_pcm_oss_plugin_clear() can be dropped, too.
Along with it, unify the buffer-free calls to a single helper and call
it from the needed places.
Link: https://lore.kernel.org/r/20220318082157.29769-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We've got syzbot reports hitting INT_MAX overflow at vmalloc()
allocation that is called from snd_pcm_plug_alloc(). Although we
apply the restrictions to input parameters, it's based only on the
hw_params of the underlying PCM device. Since the PCM OSS layer
allocates a temporary buffer for the data conversion, the size may
become unexpectedly large when more channels or higher rates is given;
in the reported case, it went over INT_MAX, hence it hits WARN_ON().
This patch is an attempt to avoid such an overflow and an allocation
for too large buffers. First off, it adds the limit of 1MB as the
upper bound for period bytes. This must be large enough for all use
cases, and we really don't want to handle a larger temporary buffer
than this size. The size check is performed at two places, where the
original period bytes is calculated and where the plugin buffer size
is calculated.
In addition, the driver uses array_size() and array3_size() for
multiplications to catch overflows for the converted period size and
buffer bytes.
Reported-by: syzbot+72732c532ac1454eeee9@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/00000000000085b1b305da5a66f3@google.com
Link: https://lore.kernel.org/r/20220318082036.29699-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
