summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-11-18atl1e: fix error return code in atl1e_probe()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a6a5325239c2 ("atl1e: Atheros L1E Gigabit Ethernet driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605581875-36281-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18atl1c: fix error return code in atl1c_probe()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 43250ddd75a3 ("atl1c: Atheros L1C Gigabit Ethernet driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605581721-36028-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18ah6: fix error return code in ah6_input()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605581105-35295-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18net: usb: qmi_wwan: Set DTR quirk for MR400Filip Moc
LTE module MR400 embedded in TL-MR6400 v4 requires DTR to be set. Signed-off-by: Filip Moc <dev@moc6.cz> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201117173631.GA550981@moc6.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18regulator: ti-abb: Fix array out of bound read access on the first transitionNishanth Menon
At the start of driver initialization, we do not know what bias setting the bootloader has configured the system for and we only know for certain the very first time we do a transition. However, since the initial value of the comparison index is -EINVAL, this negative value results in an array out of bound access on the very first transition. Since we don't know what the setting is, we just set the bias configuration as there is nothing to compare against. This prevents the array out of bound access. NOTE: Even though we could use a more relaxed check of "< 0" the only valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+. Fixes: 40b1936efebd ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver") Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/ Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20201118145009.10492-1-nm@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-18can: m_can: process interrupt only when not runtime suspendedJarkko Nikula
Avoid processing bogus interrupt statuses when the HW is runtime suspended and the M_CAN_IR register read may get all bits 1's. Handler can be called if the interrupt request is shared with other peripherals or at the end of free_irq(). Therefore check the runtime suspended status before processing. Fixes: cdf8259d6573 ("can: m_can: Add PM Support") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20200915134715.696303-1-jarkko.nikula@linux.intel.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-18gfs2: Fix regression in freeze_go_syncBob Peterson
Patch 541656d3a513 ("gfs2: freeze should work on read-only mounts") changed the check for glock state in function freeze_go_sync() from "gl->gl_state == LM_ST_SHARED" to "gl->gl_req == LM_ST_EXCLUSIVE". That's wrong and it regressed gfs2's freeze/thaw mechanism because it caused only the freezing node (which requests the glock in EX) to queue freeze work. All nodes go through this go_sync code path during the freeze to drop their SHared hold on the freeze glock, allowing the freezing node to acquire it in EXclusive mode. But all the nodes must freeze access to the file system locally, so they ALL must queue freeze work. The freeze_work calls freeze_func, which makes a request to reacquire the freeze glock in SH, effectively blocking until the thaw from the EX holder. Once thawed, the freezing node drops its EX hold on the freeze glock, then the (blocked) freeze_func reacquires the freeze glock in SH again (on all nodes, including the freezer) so all nodes go back to a thawed state. This patch changes the check back to gl_state == LM_ST_SHARED like it was prior to 541656d3a513. Fixes: 541656d3a513 ("gfs2: freeze should work on read-only mounts") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2020-11-18can: flexcan: flexcan_chip_start(): fix erroneous ↵Marc Kleine-Budde
flexcan_transceiver_enable() during bus-off recovery If the CAN controller goes into bus off, the do_set_mode() callback with CAN_MODE_START can be used to recover the controller, which then calls flexcan_chip_start(). If configured, this is done automatically by the framework or manually by the user. In flexcan_chip_start() there is an explicit call to flexcan_transceiver_enable(), which does a regulator_enable() on the transceiver regulator. This results in a net usage counter increase, as there is no corresponding flexcan_transceiver_disable() in the bus off code path. This further leads to the transceiver stuck enabled, even if the CAN interface is shut down. To fix this problem the flexcan_transceiver_enable()/flexcan_transceiver_disable() are moved out of flexcan_chip_start()/flexcan_chip_stop() into flexcan_open()/flexcan_close(). Fixes: e955cead0311 ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20201118150148.2664024-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-18can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limitsJimmy Assarsson
Use correct bittiming limits for the KCAN CAN controller. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-2-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-18can: kvaser_pciefd: Fix KCAN bittiming limitsJimmy Assarsson
Use correct bittiming limits for the KCAN CAN controller. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-1-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-17ipv4: use IS_ENABLED instead of ifdefFlorian Klink
Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED instead, which is true for both built-ins and modules. Otherwise, a > ip -4 route add 1.2.3.4/32 via inet6 fe80::2 dev eth1 fails with the message "Error: IPv6 support not enabled in kernel." if CONFIG_IPV6 is `m`. In the spirit of b8127113d01e53adba15b41aefd37b90ed83d631. Fixes: d15662682db2 ("ipv4: Allow ipv6 gateway with ipv4 routes") Cc: Kim Phillips <kim.phillips@arm.com> Signed-off-by: Florian Klink <flokli@flokli.de> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201115224509.2020651-1-flokli@flokli.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17qed: fix ILT configuration of SRC blockDmitry Bogdanov
The code refactoring of ILT configuration was not complete, the old unused variables were used for the SRC block. That could lead to the memory corruption by HW when rx filters are configured. This patch completes that refactoring. Fixes: 8a52bbab39c9 (qed: Debug feature: ilt and mdump) Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com> Link: https://lore.kernel.org/r/20201116132944.2055-1-dbogdanov@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17inet_diag: Fix error path to cancel the meseage in inet_req_diag_fill()Wang Hai
nlmsg_cancel() needs to be called in the error path of inet_req_diag_fill to cancel the message. Fixes: d545caca827b ("net: inet: diag: expose the socket mark to privileged processes.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201116082018.16496-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17tools/testing/scatterlist: Fix test to compile and runMaor Gottlieb
Add missing define of ALIGN_DOWN to make the test build and run. In addition, __sg_alloc_table_from_pages now support unaligned maximum segment, so adapt the test result accordingly. Fixes: 07da1223ec93 ("lib/scatterlist: Add support in dynamic allocation of SG table from pages") Link: https://lore.kernel.org/r/20201115120623.139113-1-leon@kernel.org Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-11-18bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_listJohn Fastabend
When skb has a frag_list its possible for skb_to_sgvec() to fail. This happens when the scatterlist has fewer elements to store pages than would be needed for the initial skb plus any of its frags. This case appears rare, but is possible when running an RX parser/verdict programs exposed to the internet. Currently, when this happens we throw an error, break the pipe, and kfree the msg. This effectively breaks the application or forces it to do a retry. Lets catch this case and handle it by doing an skb_linearize() on any skb we receive with frags. At this point skb_to_sgvec should not fail because the failing conditions would require frags to be in place. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556576837.73229.14800682790808797635.stgit@john-XPS-13-9370
2020-11-18bpf, sockmap: Handle memory acct if skb_verdict prog redirects to selfJohn Fastabend
If the skb_verdict_prog redirects an skb knowingly to itself, fix your BPF program this is not optimal and an abuse of the API please use SK_PASS. That said there may be cases, such as socket load balancing, where picking the socket is hashed based or otherwise picks the same socket it was received on in some rare cases. If this happens we don't want to confuse userspace giving them an EAGAIN error if we can avoid it. To avoid double accounting in these cases. At the moment even if the skb has already been charged against the sockets rcvbuf and forward alloc we check it again and do set_owner_r() causing it to be orphaned and recharged. For one this is useless work, but more importantly we can have a case where the skb could be put on the ingress queue, but because we are under memory pressure we return EAGAIN. The trouble here is the skb has already been accounted for so any rcvbuf checks include the memory associated with the packet already. This rolls up and can result in unnecessary EAGAIN errors in userspace read() calls. Fix by doing an unlikely check and skipping checks if skb->sk == sk. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556574804.73229.11328201020039674147.stgit@john-XPS-13-9370
2020-11-18bpf, sockmap: Avoid returning unneeded EAGAIN when redirecting to selfJohn Fastabend
If a socket redirects to itself and it is under memory pressure it is possible to get a socket stuck so that recv() returns EAGAIN and the socket can not advance for some time. This happens because when redirecting a skb to the same socket we received the skb on we first check if it is OK to enqueue the skb on the receiving socket by checking memory limits. But, if the skb is itself the object holding the memory needed to enqueue the skb we will keep retrying from kernel side and always fail with EAGAIN. Then userspace will get a recv() EAGAIN error if there are no skbs in the psock ingress queue. This will continue until either some skbs get kfree'd causing the memory pressure to reduce far enough that we can enqueue the pending packet or the socket is destroyed. In some cases its possible to get a socket stuck for a noticeable amount of time if the socket is only receiving skbs from sk_skb verdict programs. To reproduce I make the socket memory limits ridiculously low so sockets are always under memory pressure. More often though if under memory pressure it looks like a spurious EAGAIN error on user space side causing userspace to retry and typically enough has moved on the memory side that it works. To fix skip memory checks and skb_orphan if receiving on the same sock as already assigned. For SK_PASS cases this is easy, its always the same socket so we can just omit the orphan/set_owner pair. For backlog cases we need to check skb->sk and decide if the orphan and set_owner pair are needed. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556572660.73229.12566203819812939627.stgit@john-XPS-13-9370
2020-11-18bpf, sockmap: Use truesize with sk_rmem_schedule()John Fastabend
We use skb->size with sk_rmem_scheduled() which is not correct. Instead use truesize to align with socket and tcp stack usage of sk_rmem_schedule. Suggested-by: Daniel Borkman <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556570616.73229.17003722112077507863.stgit@john-XPS-13-9370
2020-11-18bpf, sockmap: Ensure SO_RCVBUF memory is observed on ingress redirectJohn Fastabend
Fix sockmap sk_skb programs so that they observe sk_rcvbuf limits. This allows users to tune SO_RCVBUF and sockmap will honor them. We can refactor the if(charge) case out in later patches. But, keep this fix to the point. Fixes: 51199405f9672 ("bpf: skb_verdict, support SK_PASS on RX BPF path") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556568657.73229.8404601585878439060.stgit@john-XPS-13-9370
2020-11-18bpf, sockmap: Fix partial copy_page_to_iter so progress can still be madeJohn Fastabend
If copy_page_to_iter() fails or even partially completes, but with fewer bytes copied than expected we currently reset sg.start and return EFAULT. This proves problematic if we already copied data into the user buffer before we return an error. Because we leave the copied data in the user buffer and fail to unwind the scatterlist so kernel side believes data has been copied and user side believes data has _not_ been received. Expected behavior should be to return number of bytes copied and then on the next read we need to return the error assuming its still there. This can happen if we have a copy length spanning multiple scatterlist elements and one or more complete before the error is hit. The error is rare enough though that my normal testing with server side programs, such as nginx, httpd, envoy, etc., I have never seen this. The only reliable way to reproduce that I've found is to stream movies over my browser for a day or so and wait for it to hang. Not very scientific, but with a few extra WARN_ON()s in the code the bug was obvious. When we review the errors from copy_page_to_iter() it seems we are hitting a page fault from copy_page_to_iter_iovec() where the code checks fault_in_pages_writeable(buf, copy) where buf is the user buffer. It also seems typical server applications don't hit this case. The other way to try and reproduce this is run the sockmap selftest tool test_sockmap with data verification enabled, but it doesn't reproduce the fault. Perhaps we can trigger this case artificially somehow from the test tools. I haven't sorted out a way to do that yet though. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/160556566659.73229.15694973114605301063.stgit@john-XPS-13-9370
2020-11-17net/tls: Fix wrong record sn in async mode of device resyncTariq Toukan
In async_resync mode, we log the TCP seq of records until the async request is completed. Later, in case one of the logged seqs matches the resync request, we return it, together with its record serial number. Before this fix, we mistakenly returned the serial number of the current record instead. Fixes: ed9b7646b06a ("net/tls: Add asynchronous resync") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Boris Pismenny <borisp@nvidia.com> Link: https://lore.kernel.org/r/20201115131448.2702-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17netdevsim: set .owner to THIS_MODULETaehee Yoo
If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: 82c93a87bf8b ("netdevsim: implement couple of testing devlink health reporters") Fixes: 424be63ad831 ("netdevsim: add UDP tunnel port offload support") Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201115103041.30701-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17enetc: Workaround for MDIO register access issueAlex Marginean
Due to a hardware issue, an access to MDIO registers that is concurrent with other ENETC register accesses may lead to the MDIO access being dropped or corrupted. The workaround introduces locking for all register accesses to the ENETC register space. To reduce performance impact, a readers-writers locking scheme has been implemented. The writer in this case is the MDIO access code (irrelevant whether that MDIO access is a register read or write), and the reader is any access code to non-MDIO ENETC registers. Also, the datapath functions acquire the read lock fewer times and use _hot accessors. All the rest of the code uses the _wa accessors which lock every register access. The commit introducing MDIO support is - commit ebfcb23d62ab ("enetc: Add ENETC PF level external MDIO support") but due to subsequent refactoring this patch is applicable on top of a later commit. Fixes: 6517798dd343 ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201112182608.26177-1-claudiu.manoil@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A fix for use-after-free in the Sun keyboard driver, a fix to firmware updates on newer ICs in the Elan touchpad diver, and a couple misc driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - fix firmware update on newer ICs Input: resistive-adc-touch - fix kconfig dependency on IIO_BUFFER Input: sunkbd - avoid use-after-free in teardown paths Input: i8042 - allow insmod to succeed on devices without an i8042 controller Input: adxl34x - clean up a data type in adxl34x_probe()
2020-11-17net/mlx5: fix error return code in mlx5e_tc_nic_init()Wang Hai
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: aedd133d17bc ("net/mlx5e: Support CT offload for tc nic flows") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabledEli Cohen
Avoid calling mlx5_esw_modify_vport_rate() if qos is not enabled and avoid unnecessary syndrome messages from firmware. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: Disable QoS when min_rates on all VFs are zeroVladyslav Tarasiuk
Currently when QoS is enabled for VF and any min_rate is configured, the driver sets bw_share value to at least 1 and doesn’t allow to set it to 0 to make minimal rate unlimited. It means there is always a minimal rate configured for every VF, even if user tries to remove it. In order to make QoS disable possible, check whether all vports have configured min_rate = 0. If this is true, set their bw_share to 0 to disable min_rate limitations. Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: Clear bw_share upon VF disableVladyslav Tarasiuk
Currently, if user disables VFs with some min and max rates configured, they are cleared. But QoS data is not cleared and restored upon next VF enable placing limits on minimal rate for given VF, when user expects none. To match cleared vport->info struct with QoS-related min and max rates upon VF disable, clear vport->qos struct too. Fixes: 556b9d16d3f5 ("net/mlx5: Clear VF's configuration on disabling SRIOV") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5: Add handling of port type in rule deletionMichael Guralnik
Handle destruction of rules with port destination type to enable full destruction of flow. Without this handling of TX rules the deletion of these rules fails. Dmesg of flow destruction failure: [ 203.714146] mlx5_core 0000:00:0b.0: mlx5_cmd_check:753:(pid 342): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a) [ 210.547387] ------------[ cut here ]------------ [ 210.548663] refcount_t: decrement hit 0; leaking memory. [ 210.550651] WARNING: CPU: 4 PID: 342 at lib/refcount.c:31 refcount_warn_saturate+0x5c/0x110 [ 210.550654] Modules linked in: mlx5_ib mlx5_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [ 210.550675] CPU: 4 PID: 342 Comm: test Not tainted 5.8.0-rc2+ #116 [ 210.550678] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 210.550680] RIP: 0010:refcount_warn_saturate+0x5c/0x110 [ 210.550685] Code: c6 d1 1b 01 00 0f 84 ad 00 00 00 5b 5d c3 80 3d b5 d1 1b 01 00 75 f4 48 c7 c7 20 d1 15 82 c6 05 a5 d1 1b 01 01 e8 a7 eb af ff <0f> 0b eb dd 80 3d 99 d1 1b 01 00 75 d4 48 c7 c7 c0 cf 15 82 c6 05 [ 210.550687] RSP: 0018:ffff8881642e77e8 EFLAGS: 00010282 [ 210.550691] RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 [ 210.550694] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102c85ceef [ 210.550696] RBP: ffff888161720428 R08: ffffffff8124c10e R09: ffffed103243beae [ 210.550698] R10: ffff8881921df56b R11: ffffed103243bead R12: ffff8881841b4180 [ 210.550701] R13: ffff888161720428 R14: ffff8881616d0000 R15: ffff888161720380 [ 210.550704] FS: 00007fc27f025740(0000) GS:ffff888192000000(0000) knlGS:0000000000000000 [ 210.550706] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 210.550708] CR2: 0000557e4b41a6a0 CR3: 0000000002415004 CR4: 0000000000360ea0 [ 210.550711] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 210.550713] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 210.550715] Call Trace: [ 210.550717] mlx5_del_flow_rules+0x484/0x490 [mlx5_core] [ 210.550720] ? mlx5_cmd_set_fte+0xa80/0xa80 [mlx5_core] [ 210.550722] mlx5_ib_destroy_flow+0x17f/0x280 [mlx5_ib] [ 210.550724] uverbs_free_flow+0x4c/0x90 [ib_uverbs] [ 210.550726] destroy_hw_idr_uobject+0x41/0xb0 [ib_uverbs] [ 210.550728] uverbs_destroy_uobject+0xaa/0x390 [ib_uverbs] [ 210.550731] __uverbs_cleanup_ufile+0x129/0x1b0 [ib_uverbs] [ 210.550733] ? uverbs_destroy_uobject+0x390/0x390 [ib_uverbs] [ 210.550735] uverbs_destroy_ufile_hw+0x78/0x190 [ib_uverbs] [ 210.550737] ib_uverbs_close+0x36/0x140 [ib_uverbs] [ 210.550739] __fput+0x181/0x380 [ 210.550741] task_work_run+0x88/0xd0 [ 210.550743] do_exit+0x5f6/0x13b0 [ 210.550745] ? sched_clock_cpu+0x30/0x140 [ 210.550747] ? is_current_pgrp_orphaned+0x70/0x70 [ 210.550750] ? lock_downgrade+0x360/0x360 [ 210.550752] ? mark_held_locks+0x1d/0x90 [ 210.550754] do_group_exit+0x8a/0x140 [ 210.550756] get_signal+0x20a/0xf50 [ 210.550758] do_signal+0x8c/0xbe0 [ 210.550760] ? hrtimer_nanosleep+0x1d8/0x200 [ 210.550762] ? nanosleep_copyout+0x50/0x50 [ 210.550764] ? restore_sigcontext+0x320/0x320 [ 210.550766] ? __hrtimer_init+0xf0/0xf0 [ 210.550768] ? timespec64_add_safe+0x150/0x150 [ 210.550770] ? mark_held_locks+0x1d/0x90 [ 210.550772] ? lockdep_hardirqs_on_prepare+0x14c/0x240 [ 210.550774] __prepare_exit_to_usermode+0x119/0x170 [ 210.550776] do_syscall_64+0x65/0x300 [ 210.550778] ? trace_hardirqs_off+0x10/0x120 [ 210.550781] ? mark_held_locks+0x1d/0x90 [ 210.550783] ? asm_sysvec_apic_timer_interrupt+0xa/0x20 [ 210.550785] ? lockdep_hardirqs_on+0x112/0x190 [ 210.550787] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 210.550789] RIP: 0033:0x7fc27f1cd157 [ 210.550791] Code: Bad RIP value. [ 210.550793] RSP: 002b:00007ffd4db27ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000023 [ 210.550798] RAX: fffffffffffffdfc RBX: ffffffffffffff80 RCX: 00007fc27f1cd157 [ 210.550800] RDX: 00007fc27f025740 RSI: 00007ffd4db27eb0 RDI: 00007ffd4db27eb0 [ 210.550803] RBP: 0000000000000016 R08: 0000000000000000 R09: 000000000000000e [ 210.550805] R10: 00007ffd4db27dc7 R11: 0000000000000246 R12: 0000000000400c00 [ 210.550808] R13: 00007ffd4db285f0 R14: 0000000000000000 R15: 0000000000000000 [ 210.550809] irq event stamp: 49399 [ 210.550812] hardirqs last enabled at (49399): [<ffffffff81172d36>] console_unlock+0x556/0x6f0 [ 210.550815] hardirqs last disabled at (49398): [<ffffffff81172897>] console_unlock+0xb7/0x6f0 [ 210.550818] softirqs last enabled at (48706): [<ffffffff81e0037b>] __do_softirq+0x37b/0x60c [ 210.550820] softirqs last disabled at (48697): [<ffffffff81c00e2f>] asm_call_on_stack+0xf/0x20 [ 210.550822] ---[ end trace ad18c0e6fa846454 ]--- [ 210.581862] mlx5_core 0000:00:0c.0: mlx5_destroy_flow_table:2132:(pid 342): Flow table 262150 wasn't destroyed, refcount > 1 Fixes: a7ee18bdee83 ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table") Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Fix check if netdev is bond slaveMaor Dickman
Bond events handler uses bond_slave_get_rtnl to check if net device is bond slave. bond_slave_get_rtnl return the rcu rx_handler pointer from the netdev which exists for bond slaves but also exists for devices that are attached to linux bridge so using it as indication for bond slave is wrong. Fix by using netif_is_lag_port instead. Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Fix IPsec packet drop by mlx5e_tc_update_skbHuy Nguyen
Both TC and IPsec crypto offload use metadata_regB to store private information. Since TC does not use bit 31 of regB, IPsec will use bit 31 as the IPsec packet marker. The IPsec's regB usage is changed to: Bit31: IPsec marker Bit30-24: IPsec syndrome Bit23-0: IPsec obj id Fixes: b2ac7541e377 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.Huy Nguyen
The IP's checksum partial still requires L4 csum flag on Ethernet WQE. Make the IPsec WAs only for the IP's non checksum partial case (for example icmd packet) Fixes: 5be019040cb7 ("net/mlx5e: IPsec: Add Connect-X IPsec Tx data path offload") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17net/mlx5e: Fix refcount leak on kTLS RX resyncMaxim Mikityanskiy
On resync, the driver calls inet_lookup_established (__inet6_lookup_established) that increases sk_refcnt of the socket. To decrease it, the driver set skb->destructor to sock_edemux. However, it didn't work well, because the TCP stack also sets this destructor for early demux, and the refcount gets decreased only once, while increased two times (in mlx5e and in the TCP stack). It leads to a socket leak, a TLS context leak, which in the end leads to calling tls_dev_del twice: on socket close and on driver unload, which in turn leads to a crash. This commit fixes the refcount leak by calling sock_gen_put right away after using the socket, thus fixing all the subsequent issues. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-11-17Merge tag 's390-5.10-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - fix system call exit path; avoid return to user space with any TIF/CIF/PIF set - fix file permission for cpum_sfb_size parameter - another small defconfig update * tag 's390-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpum_sf.c: fix file permission for cpum_sfb_size s390: update defconfigs s390: fix system call exit path
2020-11-17Merge tag 'mips_fixes_5.10_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix bug preventing booting on several platforms - fix for build error, when modules need has_transparent_hugepage - fix for memleak in alchemy clk setup * tag 'mips_fixes_5.10_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpu MIPS: kernel: Fix for_each_memblock conversion MIPS: export has_transparent_hugepage() for modules
2020-11-17tcp: only postpone PROBE_RTT if RTT is < current min_rtt estimateRyan Sharpelletti
During loss recovery, retransmitted packets are forced to use TCP timestamps to calculate the RTT samples, which have a millisecond granularity. BBR is designed using a microsecond granularity. As a result, multiple RTT samples could be truncated to the same RTT value during loss recovery. This is problematic, as BBR will not enter PROBE_RTT if the RTT sample is <= the current min_rtt sample, meaning that if there are persistent losses, PROBE_RTT will constantly be pushed off and potentially never re-entered. This patch makes sure that BBR enters PROBE_RTT by checking if RTT sample is < the current min_rtt sample, rather than <=. The Netflix transport/TCP team discovered this bug in the Linux TCP BBR code during lab tests. Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Ryan Sharpelletti <sharpelletti@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Link: https://lore.kernel.org/r/20201116174412.1433277-1-sharpelletti.kdev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: ftgmac100: Fix crash when removing driverJoel Stanley
When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific)) in net/core/dev.c due to still having the NC-SI packet handler registered. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind ------------[ cut here ]------------ kernel BUG at net/core/dev.c:10254! Internal error: Oops - BUG: 0 [#1] SMP ARM CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46 Hardware name: Generic DT based system PC is at netdev_run_todo+0x314/0x394 LR is at cpumask_next+0x20/0x24 pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153 sp : 855bbd58 ip : 00000001 fp : 855bbdac r10: 80c03d00 r9 : 80c06228 r8 : 81158c54 r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280 r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85514008 DAC: 00000051 Process sh (pid: 115, stack limit = 0x7cb5703d) ... Backtrace: [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c) r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410 r4:813b9000 [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30) [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8) r5:8115b410 r4:813b9000 [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c) Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201117024448.1170761-1-joel@jms.id.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17net: b44: fix error return code in b44_init_one()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 39a6f4bce6b4 ("b44: replace the ssb_dma API with the generic DMA API") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1605582131-36735-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17Merge tag 'perf-tools-fixes-for-v5.10-2020-11-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix file corruption due to event deletion in 'perf inject'. - Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy', silencing perf build warning. - Avoid an msan warning in a copied stack in 'perf test'. - Correct tracepoint field name "flags" in ARM's CS-ETM hardware tracing 'perf test' entry. - Update branch sample pattern for cs-etm to cope with excluding guest in userspace counting. - Don't free "lock_seq_stat" if read_count isn't zero in 'perf lock'. * tag 'perf-tools-fixes-for-v5.10-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test: Avoid an msan warning in a copied stack. perf inject: Fix file corruption due to event deletion perf test: Update branch sample pattern for cs-etm perf test: Fix a typo in cs-etm testing tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy' perf lock: Don't free "lock_seq_stat" if read_count isn't zero perf lock: Correct field name "flags"
2020-11-17qed: fix error return code in qed_iwarp_ll2_start()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 469981b17a4f ("qed: Add unaligned and packed packet processing") Fixes: fcb39f6c10b2 ("qed: Add mpa buffer descriptors for storing and processing mpa fpdus") Fixes: 1e28eaad07ea ("qed: Add iWARP support for fpdu spanned over more than two tcp packets") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Link: https://lore.kernel.org/r/1605532033-27373-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17Merge branch 'urgent-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "A single commit that fixes a bug that was introduced a couple of merge windows ago, but which rather more recently converged to an agreed-upon fix. The bug is that interrupts can be incorrectly enabled while holding an irq-disabled spinlock. This can of course result in self-deadlocks. The bug is a bit difficult to trigger. It requires that a preempted task be blocking a preemptible-RCU grace period long enough to trigger an RCU CPU stall warning. In addition, an interrupt must occur at just the right time, and that interrupt's handler must acquire that same irq-disabled spinlock. Still, a deadlock is a deadlock. Furthermore, we do now have a fix, and that fix survives kernel test robot, -next, and rcutorture testing. It has also been verified by Sebastian as fixing the bug. Therefore..." * 'urgent-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu: Don't invoke try_invoke_on_locked_down_task() with irqs disabled
2020-11-17spi: npcm-fiu: Don't leak SPI master in probe error pathLukas Wunner
If the calls to of_match_device(), of_alias_get_id(), devm_ioremap_resource(), devm_regmap_init_mmio() or devm_clk_get() fail on probe of the NPCM FIU SPI driver, the spi_controller struct is erroneously not freed. Fix by switching over to the new devm_spi_alloc_master() helper. Fixes: ace55c411b11 ("spi: npcm-fiu: add NPCM FIU controller driver") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: <stable@vger.kernel.org> # v5.4+: 5e844cc37a5c: spi: Introduce device-managed SPI controller allocation Cc: <stable@vger.kernel.org> # v5.4+ Cc: Tomer Maimon <tmaimon77@gmail.com> Link: https://lore.kernel.org/r/a420c23a363a3bc9aa684c6e790c32a8af106d17.1605512876.git.lukas@wunner.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-17spi: dw: Set transfer handler before unmasking the IRQsSerge Semin
It turns out the IRQs most like can be unmasked before the controller is enabled with no problematic consequences. The manual doesn't explicitly state that, but the examples perform the controller initialization procedure in that order. So the commit da8f58909e7e ("spi: dw: Unmask IRQs after enabling the chip") hasn't been that required as I thought. But anyway setting the IRQs up after the chip enabling still worth adding since it has simplified the code a bit. The problem is that it has introduced a potential bug. The transfer handler pointer is now initialized after the IRQs are enabled. That may and eventually will cause an invalid or uninitialized callback invocation. Fix that just by performing the callback initialization before the IRQ unmask procedure. Fixes: da8f58909e7e ("spi: dw: Unmask IRQs after enabling the chip") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20201117094054.4696-1-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2020-11-17xtensa: uaccess: Add missing __user to strncpy_from_user() prototypeLaurent Pinchart
When adding __user annotations in commit 2adf5352a34a, the strncpy_from_user() function declaration for the CONFIG_GENERIC_STRNCPY_FROM_USER case was missed. Fix it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Message-Id: <20200831210937.17938-1-laurent.pinchart@ideasonboard.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2020-11-17Merge branch 'cpufreq/arm/fixes' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull cpufreq-arm fixes for 5.10-rc5 from Viresh Kumar: "- tegra186: Fix ->get() callback. - arm/scmi: Add dummy clock provider to fix failure." * 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: scmi: Fix OPP addition failure with a dummy clock provider cpufreq: tegra186: Fix get frequency callback
2020-11-17MIPS: Alchemy: Fix memleak in alchemy_clk_setup_cpuZhang Qilong
If the clk_register fails, we should free h before function returns to prevent memleak. Fixes: 474402291a0ad ("MIPS: Alchemy: clock framework integration of onchip clocks") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-11-17MIPS: kernel: Fix for_each_memblock conversionThomas Bogendoerfer
The loop over all memblocks works with PFNs and not physical addresses, so we need for_each_mem_pfn_range(). Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
2020-11-17cpufreq: scmi: Fix OPP addition failure with a dummy clock providerSudeep Holla
Commit dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") handles -EPROBE_DEFER for the clock/interconnects within _allocate_opp_table() which is called from dev_pm_opp_add and it now propagates the error back to the caller. SCMI performance domain re-used clock bindings to keep it simple. However with the above mentioned change, if clock property is present in a device node, opps fails to get added with below errors until clk_get succeeds. cpu0: failed to add opp 450000000Hz cpu0: failed to add opps to the device ....(errors on cpu1-cpu4) cpu5: failed to add opp 450000000Hz cpu5: failed to add opps to the device So, in order to fix the issue, we need to register dummy clock provider. With the dummy clock provider, clk_get returns NULL(no errors!), then opp core proceeds to add OPPs for the CPUs. Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Fixes: dd461cd9183f ("opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-17cpufreq: tegra186: Fix get frequency callbackJon Hunter
Commit b89c01c96051 ("cpufreq: tegra186: Fix initial frequency") implemented the CPUFREQ 'get' callback to determine the current operating frequency for each CPU. This implementation used a simple looked up to determine the current operating frequency. The problem with this is that frequency table for different Tegra186 devices may vary and so the default boot frequency for Tegra186 device may or may not be present in the frequency table. If the default boot frequency is not present in the frequency table, this causes the function tegra186_cpufreq_get() to return 0 and in turn causes cpufreq_online() to fail which prevents CPUFREQ from working. Fix this by always calculating the CPU frequency based upon the current 'ndiv' setting for the CPU. Note that the CPU frequency for Tegra186 is calculated by reading the current 'ndiv' setting, multiplying by the CPU reference clock and dividing by a constant divisor. Fixes: b89c01c96051 ("cpufreq: tegra186: Fix initial frequency") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2020-11-16Merge branch 'bnxt_en-bug-fixes'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: Bug fixes. This first patch fixes a module eeprom A2h addressing issue. The next 2 patches fix counter related issues. The last one skips an unsupported firmware call on the VF to avoid the error log. ==================== Link: https://lore.kernel.org/r/1605486472-28156-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-09 09:46:31 +0000