Age | Commit message (Collapse) | Author |
|
The recent changes to store the MSI irqdomain pointer in struct device
missed that Intel DMAR does not register virtual function devices. Due to
that a VF device gets the plain PCI-MSI domain assigned and then issues
compat MSI messages which get caught by the interrupt remapping unit.
Cure that by inheriting the irq domain from the physical function
device.
Ideally the irqdomain would be associated to the bus, but DMAR can have
multiple units and therefore irqdomains on a single bus. The VF 'bus' could
of course inherit the domain from the PF, but that'd be yet another x86
oddity.
Fixes: 85a8dfc57a0b ("iommm/vt-d: Store irq domain in struct device")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/draft-87eekymlpz.fsf@nanos.tec.linutronix.de
|
|
QCOM KRYO2XX Silver cores are Cortex-A53 based and are
susceptible to the 845719 erratum. Add them to the lookup
list to apply the erratum.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20201104232218.198800-5-konrad.dybcio@somainline.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
KRYO2XX silver (LITTLE) CPUs are based on Cortex-A53
and they are not affected by spectre-v2.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20201104232218.198800-4-konrad.dybcio@somainline.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
QCOM KRYO2XX gold (big) silver (LITTLE) CPU cores are based on
Cortex-A73 and Cortex-A53 respectively and are meltdown safe,
hence add them to kpti_safe_list[].
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20201104232218.198800-3-konrad.dybcio@somainline.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add MIDR value for KRYO2XX gold (big) and silver (LITTLE)
CPU cores which are used in Qualcomm Technologies, Inc.
SoCs. This will be used to identify and apply errata
which are applicable for these CPU cores.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20201104232218.198800-2-konrad.dybcio@somainline.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
During memory hotplug process, the linear mapping should not be created for
a given memory range if that would fall outside the maximum allowed linear
range. Else it might cause memory corruption in the kernel virtual space.
Maximum linear mapping region is [PAGE_OFFSET..(PAGE_END -1)] accommodating
both its ends but excluding PAGE_END. Max physical range that can be mapped
inside this linear mapping range, must also be derived from its end points.
This ensures that arch_add_memory() validates memory hot add range for its
potential linear mapping requirements, before creating it with
__create_pgd_mapping().
Fixes: 4ab215061554 ("arm64: Add memory hotplug support")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1605252614-761-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If sta_info_insert_finish() fails, we currently keep the station
around and free it only in the caller, but there's only one such
caller and it always frees it immediately.
As syzbot found, another consequence of this split is that we can
put things that sleep only into __cleanup_single_sta() and not in
sta_info_free(), but this is the only place that requires such of
sta_info_free() now.
Change this to free the station in sta_info_insert_finish(), in
which case we can still sleep. This will also let us unify the
cleanup code later.
Cc: stable@vger.kernel.org
Fixes: dcd479e10a05 ("mac80211: always wind down STA state")
Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com
Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com
Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com
Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com
Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com
Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.10-2020-11-12:
amdgpu:
- Pageflip fix for DCN3
- Declare TA firmware for green sardine
- Headless navi fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113055512.3963-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Pull phys pread/pwrite implementations to the backend (Chris)
- Correctly set SFC capability for video engines (Venkata)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113052551.GA1319429@intel.com
|
|
There is a NULL pointer crash when DCN disabled on headless SKU.
On normal SKU, the variable adev->ddev.mode_config.funcs is
initialized in dm_hw_init(), and it is fine to access it in
amdgpu_device_resume(). But on headless SKU, DCN is disabled,
the funcs variable is not initialized, then crash arises.
Enable DCN to fix this issue.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Tianci.Yin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In preparation to enabling hdcp on green sardine.
[How]
Add green-sardine ta f/w loading in psp_v12
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One Kconfig fix for bridge/cdns, a missing include for hypervb_fb, an
out-of-bound access fix for gma500 and a unbalanced regulator fix for
mcde.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112130726.qwtryqvgspmljkax@gilmour.lan
|
|
The x25_disconnect function in x25_subr.c would decrease the refcount of
"x25->neighbour" (struct x25_neigh) and reset this pointer to NULL.
However, the x25_rx_call_request function in af_x25.c, which is called
when we receive a connection request, does not increase the refcount when
it assigns the pointer.
Fix this issue by increasing the refcount of "struct x25_neigh" in
x25_rx_call_request.
This patch fixes frequent kernel crashes when using AF_X25 sockets.
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/1605180879-2573-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since Grub may align the size of initrd to 4 if user pass
initrd from cpio, we have to check the preceding 3 bytes as well.
Link: https://lkml.kernel.org/r/160520205132.303174.4876760192433315429.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes: 85c46b78da58 ("bootconfig: Add bootconfig magic word for indicating bootconfig explicitly")
Reported-by: Chen Yu <yu.chen.surf@gmail.com>
Tested-by: Chen Yu <yu.chen.surf@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Fix to return a negative error code from the error handling case
instead of 0 in function sel_ib_pkey_sid_slow(), as done elsewhere
in this function.
Cc: stable@vger.kernel.org
Fixes: 409dcf31538a ("selinux: Add a cache for quicker retreival of PKey SIDs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
The ndo_start_xmit() method must return NETDEV_TX_OK if the DMA mapping
fails, after freeing the socket buffer.
Fix the mtk_star_netdev_start_xmit() function accordingly.
Fixes: 8c7bd5a454ff ("net: ethernet: mtk-star-emac: new driver")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20201112084833.21842-1-vincent.stehle@laposte.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a user unbinds and re-binds a NC-SI aware driver the kernel will
attempt to register the netlink interface at runtime. The structure is
marked __ro_after_init so registration fails spectacularly at this point.
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind
# echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind
ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip
ftgmac100 1e660000.ethernet: Using NCSI interface
8<--- cut here ---
Unable to handle kernel paging request at virtual address 80a8f858
pgd = 8c768dd6
[80a8f858] *pgd=80a0841e(bad)
Internal error: Oops: 80d [#1] SMP ARM
CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51
Hardware name: Generic DT based system
PC is at genl_register_family+0x1f8/0x6d4
LR is at 0xff26ffff
pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153
sp : 8553bc80 ip : 81406244 fp : 8553bd04
r10: 8085d12c r9 : 80a8f73c r8 : 85739000
r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858
r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017
Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none
Control: 00c5387d Table: 85524008 DAC: 00000051
Process sh (pid: 116, stack limit = 0x1f1988d6)
...
Backtrace:
[<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48)
r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000
r4:8121c000
[<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210)
r5:8121c400 r4:8121c000
[<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778)
r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88
r4:85739000
[<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8)
r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000
[<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514)
r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10
Jakub pointed out that ncsi_register_dev is obviously broken, because
there is only one family so it would never work if there was more than
one ncsi netdev.
Fix the crash by registering the netlink family once on boot, and drop
the code to unregister it.
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SFC capability of video engines is not set correctly because i915
is testing for incorrect bits.
Fixes: c5d3e39caa45 ("drm/i915: Engine discovery query")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.3+
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106011842.36203-1-daniele.ceraolospurio@intel.com
(cherry picked from commit ad18fa0f5f052046cad96fee762b5c64f42dd86a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Move the specialised interactions with the physical GEM object from the
pread/pwrite ioctl handler into the phys backend.
Currently, if one is able to exhaust the entire aperture and then try to
pwrite into an object not backed by struct page, we accidentally invoked
the phys pwrite handler on a non-phys object; calamitous.
Fixes: c6790dc22312 ("drm/i915: Wean off drm_pci_alloc/drm_pci_free")
Testcase: igt/gem_pwrite/exhaustion
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201105154934.16022-2-chris@chris-wilson.co.uk
(cherry picked from commit 852e1b3644817f071427b83859b889c788a0cf69)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
As there are more and more complicated interactions between the different
backing stores and userspace, push the control into the backends rather
than accumulate them all inside the ioctl handlers.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105154934.16022-1-chris@chris-wilson.co.uk
(cherry picked from commit 0049b688459b846f819b6e51c24cd0781fcfde41)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull fscrypt fix from Eric Biggers:
"Fix a regression where new files weren't using inline encryption when
they should be"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: fix inline encryption not used on new files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Fix jdata data corruption and glock reference leak"
* tag 'gfs2-v5.10-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix case in which ail writes are done to jdata holes
Revert "gfs2: Ignore journal log writes for jdata holes"
gfs2: fix possible reference leak in gfs2_check_blk_type
|
|
A test shows that the output contains a space:
# cat /proc/sgi_uv/archtype
NSGI4 U/UVX
Remove that embedded space by copying the "trimmed" buffer instead of the
untrimmed input character list. Use sizeof to remove size dependency on
copy out length. Increase output buffer size by one character just in case
BIOS sends an 8 character string for archtype.
Fixes: 1e61f5a95f19 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Link: https://lore.kernel.org/r/20201111010418.82133-1-mike.travis@hpe.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"
* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
|
|
Pull NFS client bugfixes from Anna Schumaker:
"Stable fixes:
- Fix failure to unregister shrinker
Other fixes:
- Fix unnecessary locking to clear up some contention
- Fix listxattr receive buffer size
- Fix default mount options for nfsroot"
* tag 'nfs-for-5.10-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Remove unnecessary inode lock in nfs_fsync_dir()
NFS: Remove unnecessary inode locking in nfs_llseek_dir()
NFS: Fix listxattr receive buffer size
NFSv4.2: fix failure to unregister shrinker
nfsroot: Default mount option should ask for built-in NFS version
|
|
As the kernel never sets HCR_EL2.EnSCXT, accesses to SCXTNUM_ELx
will trap to EL2. Let's handle that as gracefully as possible
by injecting an UNDEF exception into the guest. This is consistent
with the guest's view of ID_AA64PFR0_EL1.CSV2 being at most 1.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201110141308.451654-4-maz@kernel.org
|
|
A large number of system register trap handlers only inject an
UNDEF exeption, and yet each class of sysreg seems to provide its
own, identical function.
Let's unify them all, saving us introducing yet another one later.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201110141308.451654-3-maz@kernel.org
|
|
We now expose ID_AA64PFR0_EL1.CSV2=1 to guests running on hosts
that are immune to Spectre-v2, but that don't have this field set,
most likely because they predate the specification.
However, this prevents the migration of guests that have started on
a host the doesn't fake this CSV2 setting to one that does, as KVM
rejects the write to ID_AA64PFR0_EL2 on the grounds that it isn't
what is already there.
In order to fix this, allow userspace to set this field as long as
this doesn't result in a promising more than what is already there
(setting CSV2 to 0 is acceptable, but setting it to 1 when it is
already set to 0 isn't).
Fixes: e1026237f9067 ("KVM: arm64: Set CSV2 for guests on hardware unaffected by Spectre-v2")
Reported-by: Peng Liang <liangpeng10@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201110141308.451654-2-maz@kernel.org
|
|
Linux 5.10-rc1
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Commit 716ad0986cbd ("loop: Switch to set_capacity_revalidate_and_notify")
causes an occasional drop of loop device uevent, which are no longer
triggered in loop_set_size() but in a different part of code.
Bug is reproducible with LTP test uevent01 [1]:
i=0; while true; do
i=$((i+1)); echo "== $i =="
lsmod |grep -q loop && rmmod -f loop
./uevent01 || break
done
Put back triggering through code called in loop_set_size().
Fix required to add yet another parameter to
set_capacity_revalidate_and_notify().
[1] https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/uevents/uevent01.c
[hch: rebased on a different change to the prototype of
set_capacity_revalidate_and_notify]
Cc: stable@vger.kernel.org # v5.9
Fixes: 716ad0986cbd ("loop: Switch to set_capacity_revalidate_and_notify")
Reported-by: <ltp@lists.linux.it>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Return if the function ended up sending an uevent or not.
Cc: stable@vger.kernel.org # v5.9
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Backchannel rpc tasks don't have task->tk_client set, so it's necessary
to check it for NULL before dereferencing.
Fixes: c509f15a5801 ("SUNRPC: Split the xdr_buf event class")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Since the commit 943b69ac1884 ("perf parse-events: Set exclude_guest=1
for user-space counting"), 'exclude_guest=1' is set for user-space
counting; and the branch sample's modifier has been altered, the sample
event name has been changed from "branches:u:" to "branches:uH:", which
gives out info for "user-space and host counting".
But the cs-etm testing's regular expression cannot match the updated
branch sample event and leads to test failure.
This patch updates the branch sample pattern by using a more flexible
expression '.*' to match branch sample's modifiers, so that allows the
testing to work as expected.
Fixes: 943b69ac1884 ("perf parse-events: Set exclude_guest=1 for user-space counting")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20201110063417.14467-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fix a typo: s/devce_name/device_name.
Fixes: fe0aed19b266 ("perf test: Introduce script for Arm CoreSight testing")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight ml <coresight@lists.linaro.org>
Cc: stable@kernel.org
Link: http://lore.kernel.org/lkml/20201110063417.14467-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
mem memcpy'
To bring in the change made in this cset:
4d6ffa27b8e5116c ("x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S")
6dcc5627f6aec4cb ("x86/asm: Change all ENTRY+ENDPROC to SYM_FUNC_*")
I needed to define SYM_FUNC_START_LOCAL() as SYM_L_GLOBAL as
mem{cpy,set}_{orig,erms} are used by 'perf bench'.
This silences these perf tools build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When execute command "perf lock report", it hits failure and outputs log
as follows:
perf: builtin-lock.c:623: report_lock_release_event: Assertion `!(seq->read_count < 0)' failed.
Aborted
This is an imbalance issue. The locking sequence structure
"lock_seq_stat" contains the reader counter and it is used to check if
the locking sequence is balance or not between acquiring and releasing.
If the tool wrongly frees "lock_seq_stat" when "read_count" isn't zero,
the "read_count" will be reset to zero when allocate a new structure at
the next time; thus it causes the wrong counting for reader and finally
results in imbalance issue.
To fix this issue, if detects "read_count" is not zero (means still have
read user in the locking sequence), goto the "end" tag to skip freeing
structure "lock_seq_stat".
Fixes: e4cef1f65061 ("perf lock: Fix state machine to recognize lock sequence")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201104094229.17509-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The tracepoint "lock:lock_acquire" contains field "flags" but not
"flag". Current code wrongly retrieves value from field "flag" and it
always gets zero for the value, thus "perf lock" doesn't report the
correct result.
This patch replaces the field name "flag" with "flags", so can read out
the correct flags for locking.
Fixes: e4cef1f65061 ("perf lock: Fix state machine to recognize lock sequence")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201104094229.17509-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Here's my proposal to fix the use-after-free bugs reported by
Sascha Hauer and Florian Fainelli:
I scrutinized all SPI drivers in the v5.10 tree:
* There are 9 drivers with a use-after-free in the ->remove() hook
caused by accessing driver private data after spi_unregister_controller().
* There are 8 drivers which leak the spi_controller in the ->probe()
error path because of a missing spi_controller_put().
I'm introducing devm_spi_alloc_master/slave() which automatically
calls spi_controller_put() on ->remove(). This fixes both classes
of bugs while at the same time reducing code amount and complexity
in the ->probe() hook.
I propose that spi_controller_unregister() should no longer release
a reference on the spi_controller. Instead, drivers need to either
do it themselves or use one of the devm functions introduced herein.
The vast majority of drivers can be converted to the devm functions.
See the commit message of patch [1/4] for the rationale and details.
Enclosed are patches for 3 Broadcom drivers.
Patches for the other drivers are on this branch:
https://github.com/l1k/linux/commits/spi_fixes
@Florian Fainelli: Could you verify that there are no KASAN splats or
leaks with these patches? Unfortunately I do not have any SPI-capable
hardware at my disposal right now, so can only compile-test. You may
want to augment spi_controller_release() with a printk() to log when
the spi_controller is freed.
@Mark Brown: Patches [2/4] to [4/4] reference the SHA-1 of patch [1/4]
in their stable tags. Because the hash is unknown to me until you apply
the patch, I've used "123456789abc" as a placeholder. You'll have to
replace the hash if/when applying. Alternatively, only apply patch [1/4]
and I'll repost the other patches with the hash fixed up.
Thanks!
Lukas Wunner (4):
spi: Introduce device-managed SPI controller allocation
spi: bcm2835: Fix use-after-free on unbind
spi: bcm2835aux: Fix use-after-free on unbind
spi: bcm-qspi: Fix use-after-free on unbind
drivers/spi/spi-bcm-qspi.c | 34 ++++++++-------------
drivers/spi/spi-bcm2835.c | 24 +++++----------
drivers/spi/spi-bcm2835aux.c | 21 +++++--------
drivers/spi/spi.c | 58 +++++++++++++++++++++++++++++++++++-
include/linux/spi/spi.h | 19 ++++++++++++
5 files changed, 103 insertions(+), 53 deletions(-)
--
2.28.0
|
|
Andrii has been a de-facto maintainer for libbpf and other components.
Update maintainers entry to acknowledge his work de-jure.
The folks with git write permissions will continue to follow the rule
of not applying their own patches unless absolutely trivial.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201112180340.45265-1-alexei.starovoitov@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are mostly docmentation fixes and janitorial changes plus some
new device IDs and a new quirk.
Specifics:
- Fix documentation regarding GPIO properties (Andy Shevchenko)
- Fix spelling mistakes in ACPI documentation (Flavio Suligoi)
- Fix white space inconsistencies in ACPI code (Maximilian Luz)
- Fix string formatting in the ACPI Generic Event Device (GED) driver
(Nick Desaulniers)
- Add Intel Alder Lake device IDs to the ACPI drivers used by the
Dynamic Platform and Thermal Framework (Srinivas Pandruvada)
- Add lid-related DMI quirk for Medion Akoya E2228T to the ACPI
button driver (Hans de Goede)"
* tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: DPTF: Support Alder Lake
Documentation: ACPI: fix spelling mistakes
ACPI: button: Add DMI quirk for Medion Akoya E2228T
ACPI: GED: fix -Wformat
ACPI: Fix whitespace inconsistencies
ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name
Documentation: firmware-guide: gpio-properties: Clarify initial output state
Documentation: firmware-guide: gpio-properties: active_low only for GpioIo()
Documentation: firmware-guide: gpio-properties: Fix factual mistakes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Make the intel_pstate driver behave as expected when it operates in
the passive mode with HWP enabled and the 'powersave' governor on top
of it"
* tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account
cpufreq: Add strict_target to struct cpufreq_policy
cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET
cpufreq: Introduce governor flags
|
|
Normally the last reference on an spi_controller is released by
spi_unregister_controller(). In the case of the i.MX lpspi driver,
the spi_controller is registered with devm_spi_register_controller(),
so spi_unregister_controller() is invoked automatically after the driver
has unbound.
However the driver already releases the last reference in
fsl_lpspi_remove() through a gratuitous call to spi_master_put(),
causing a use-after-free when spi_unregister_controller() is
subsequently invoked by the devres framework.
Fix by dropping the superfluous spi_master_put().
Fixes: 944c01a889d9 ("spi: lpspi: enable runtime pm for lpspi")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: <stable@vger.kernel.org> # v5.2+
Cc: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/ab3c0b18bd820501a12c85e440006e09ec0e275f.1604874488.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When no devicetree is present, the driver will use an
uninitialized variable.
Fix by initializing this variable.
Fixes: 902a66e08cea ("lan743x: correctly handle chips with internal PHY")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Alexander Lobakin says:
====================
net: udp: fix Fast/frag0 UDP GRO
While testing UDP GSO fraglists forwarding through driver that uses
Fast GRO (via napi_gro_frags()), I was observing lots of out-of-order
iperf packets:
[ ID] Interval Transfer Bitrate Jitter
[SUM] 0.0-40.0 sec 12106 datagrams received out-of-order
Simple switch to napi_gro_receive() or any other method without frag0
shortcut completely resolved them.
I've found two incorrect header accesses in GRO receive callback(s):
- udp_hdr() (instead of udp_gro_udphdr()) that always points to junk
in "fast" mode and could probably do this in "regular".
This was the actual bug that caused all out-of-order delivers;
- udp{4,6}_lib_lookup_skb() -> ip{,v6}_hdr() (instead of
skb_gro_network_header()) that potentionally might return odd
pointers in both modes.
Each patch addresses one of these two issues.
This doesn't cover a support for nested tunnels as it's out of the
subject and requires more invasive changes. It will be handled
separately in net-next series.
Credits:
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Since v4 [0]:
- split the fix into two logical ones (Willem);
- replace ternaries with plain ifs to beautify the code (Jakub);
- drop p->data part to reintroduce it later in abovementioned set.
Since v3 [1]:
- restore the original {,__}udp{4,6}_lib_lookup_skb() and use
private versions of them inside GRO code (Willem).
Since v2 [2]:
- dropped redundant check introduced in v2 as it's performed right
before (thanks to Eric);
- udp_hdr() switched to data + off for skbs from list (also Eric);
- fixed possible malfunction of {,__}udp{4,6}_lib_lookup_skb() with
Fast/frag0 due to ip{,v6}_hdr() usage (Willem).
Since v1 [3]:
- added a NULL pointer check for "uh" as suggested by Willem.
[0] https://lore.kernel.org/netdev/Ha2hou5eJPcblo4abjAqxZRzIl1RaLs2Hy0oOAgFs@cp4-web-036.plabs.ch
[1] https://lore.kernel.org/netdev/MgZce9htmEtCtHg7pmWxXXfdhmQ6AHrnltXC41zOoo@cp7-web-042.plabs.ch
[2] https://lore.kernel.org/netdev/0eaG8xtbtKY1dEKCTKUBubGiC9QawGgB3tVZtNqVdY@cp4-web-030.plabs.ch
[3] https://lore.kernel.org/netdev/YazU6GEzBdpyZMDMwJirxDX7B4sualpDG68ADZYvJI@cp4-web-034.plabs.ch
====================
Link: https://lore.kernel.org/r/hjGOh0iCOYyo1FPiZh6TMXcx3YCgNs1T1eGKLrDz8@cp4-web-037.plabs.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the
packet. While it's probably OK for non-frag0 paths, this helpers
will also point to junk on Fast/frag0 GRO when all headers are
located in frags. As a result, sk/skb lookup may fail or give wrong
results. To support both GRO modes, skb_gro_network_header() might
be used. To not modify original functions, add private versions of
udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO.
Present since the introduction of "application-level" UDP GRO
in 4.7-rc1.
Misc: replace totally unneeded ternaries with plain ifs.
Fixes: a6024562ffd7 ("udp: Add GRO functions to UDP socket")
Suggested-by: Willem de Bruijn <willemb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's
probably OK for non-frag0 paths (when all headers or even the entire
frame are already in skb head), this inline points to junk when
using Fast GRO (napi_gro_frags() or napi_gro_receive() with only
Ethernet header in skb head and all the rest in the frags) and breaks
GRO packet compilation and the packet flow itself.
To support both modes, skb_gro_header_fast() + skb_gro_header_slow()
are typically used. UDP even has an inline helper that makes use of
them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr()
to get rid of the out-of-order delivers.
Present since the introduction of plain UDP GRO in 5.0-rc1.
Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Patch b2a846dbef4e ("gfs2: Ignore journal log writes for jdata holes")
tried (unsuccessfully) to fix a case in which writes were done to jdata
blocks, the blocks are sent to the ail list, then a punch_hole or truncate
operation caused the blocks to be freed. In other words, the ail items
are for jdata holes. Before b2a846dbef4e, the jdata hole caused function
gfs2_block_map to return -EIO, which was eventually interpreted as an
IO error to the journal, and then withdraw.
This patch changes function gfs2_get_block_noalloc, which is only used
for jdata writes, so it returns -ENODATA rather than -EIO, and when
-ENODATA is returned to gfs2_ail1_start_one, the error is ignored.
We can safely ignore it because gfs2_ail1_start_one is only called
when the jdata pages have already been written and truncated, so the
ail1 content no longer applies.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
This reverts commit b2a846dbef4ef54ef032f0f5ee188c609a0278a7.
That commit changed the behavior of function gfs2_block_map to return
-ENODATA in cases where a hole (IOMAP_HOLE) is encountered and create is
false. While that fixed the intended problem for jdata, it also broke
other callers of gfs2_block_map such as some jdata block reads. Before
the patch, an encountered hole would be skipped and the buffer seen as
unmapped by the caller. The patch changed the behavior to return
-ENODATA, which is interpreted as an error by the caller.
The -ENODATA return code should be restricted to the specific case where
jdata holes are encountered during ail1 writes. That will be done in a
later patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
dma_virt_ops requires that all pages have a kernel virtual address.
Introduce a INFINIBAND_VIRT_DMA Kconfig symbol that depends on !HIGHMEM
and make all three drivers depend on the new symbol.
Also remove the ARCH_DMA_ADDR_T_64BIT dependency, which has been obsolete
since commit 4965a68780c5 ("arch: define the ARCH_DMA_ADDR_T_64BIT config
symbol in lib/Kconfig")
Fixes: 551199aca1c3 ("lib/dma-virt: Add dma_virt_ops")
Link: https://lore.kernel.org/r/20201106181941.1878556-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|