| Age | Commit message (Collapse) | Author |
|---|
|
If we break out of the loop because an extent buffer doesn't have the bit
EXTENT_BUFFER_TREE_REF set, we end up unlocking the xarray twice, once
before we tested for the bit and break out of the loop, and once again
after the loop.
Fix this by testing the bit and exiting before unlocking the xarray.
The time spent testing the bit is negligible and it's not worth trying
to do that outside the critical section delimited by the xarray lock due
to the code complexity required to avoid it (like using a local boolean
variable to track whether the xarray is locked or not). The xarray unlock
only needs to be done before calling release_extent_buffer(), as that
needs to lock the xarray (through xa_cmpxchg_irq()) and does a more
significant amount of work.
Fixes: 19d7f65f032f ("btrfs: convert the buffer_radix to an xarray")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/linux-btrfs/aDRNDU0GM1_D4Xnw@stanley.mountain/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <maharmstone@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a race between a rename and directory inode logging that if it
happens and we crash/power fail before the rename completes, the next time
the filesystem is mounted, the log replay code will end up deleting the
file that was being renamed.
This is best explained following a step by step analysis of an interleaving
of steps that lead into this situation.
Consider the initial conditions:
1) We are at transaction N;
2) We have directories A and B created in a past transaction (< N);
3) We have inode X corresponding to a file that has 2 hardlinks, one in
directory A and the other in directory B, so we'll name them as
"A/foo_link1" and "B/foo_link2". Both hard links were persisted in a
past transaction (< N);
4) We have inode Y corresponding to a file that as a single hard link and
is located in directory A, we'll name it as "A/bar". This file was also
persisted in a past transaction (< N).
The steps leading to a file loss are the following and for all of them we
are under transaction N:
1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field
is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir();
2) Task A starts a rename for inode Y, with the goal of renaming from
"A/bar" to "A/baz", so we enter btrfs_rename();
3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling
btrfs_insert_inode_ref();
4) Because the rename happens in the same directory, we don't set the
last_unlink_trans field of directoty A's inode to the current
transaction id, that is, we don't cal btrfs_record_unlink_dir();
5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY
and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode()
(actually the dir index item is added as a delayed item, but the
effect is the same);
6) Now before task A adds the new entry "A/baz" to directory A by
calling btrfs_add_link(), another task, task B is logging inode X;
7) Task B starts a fsync of inode X and after logging inode X, at
btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since
inode X has a last_unlink_trans value of N, set at in step 1;
8) At btrfs_log_all_parents() we search for all parent directories of
inode X using the commit root, so we find directories A and B and log
them. Bu when logging direct A, we don't have a dir index item for
inode Y anymore, neither the old name "A/bar" nor for the new name
"A/baz" since the rename has deleted the old name but has not yet
inserted the new name - task A hasn't called yet btrfs_add_link() to
do that.
Note that logging directory A doesn't fallback to a transaction
commit because its last_unlink_trans has a lower value than the
current transaction's id (see step 4);
9) Task B finishes logging directories A and B and gets back to
btrfs_sync_file() where it calls btrfs_sync_log() to persist the log
tree;
10) Task B successfully persisted the log tree, btrfs_sync_log() completed
with success, and a power failure happened.
We have a log tree without any directory entry for inode Y, so the
log replay code deletes the entry for inode Y, name "A/bar", from the
subvolume tree since it doesn't exist in the log tree and the log
tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY
item that covers the index range for the dentry that corresponds to
"A/bar").
Since there's no other hard link for inode Y and the log replay code
deletes the name "A/bar", the file is lost.
The issue wouldn't happen if task B synced the log only after task A
called btrfs_log_new_name(), which would update the log with the new name
for inode Y ("A/bar").
Fix this by pinning the log root during renames before removing the old
directory entry, and unpinning after btrfs_log_new_name() is called.
Fixes: 259c4b96d78d ("btrfs: stop doing unnecessary log updates during a rename")
CC: stable@vger.kernel.org # 5.18+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a "scrub: " prefix to all messages logged by scrub so that it's
easy to filter them from dmesg for analysis.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a warning for leaked delayed_nodes when putting a root. We currently
do this for inodes, but not delayed_nodes.
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ Remove the changelog from the commit message. ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the delayed_root is not empty we are increasing the number of
references to a delayed_node without decreasing it, causing a leak. Fix
by decrementing the delayed_node reference count.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Leo Martins <loemra.dev@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ Remove the changelog from the commit message. ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
To help debugging include the root number in the error message, and since
this is a critical error that implies a metadata inconsistency and results
in a transaction abort change the log message level from "info" to
"critical", which is a much better fit.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The VHE hyp code has recently gained a few ISBs. Simplify this to one
unconditional ISB in __kvm_vcpu_run_vhe(), and remove the unnecessary
ISB from the kvm_call_hyp_ret() macro.
While kvm_call_hyp_ret() is also used to invoke
__vgic_v3_get_gic_config(), but no ISB is necessary in that case either.
For the moment, an ISB is left in kvm_call_hyp(), as there are many more
users, and removing the ISB would require a more thorough audit.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
We no longer use cpacr_clear_set().
Remove cpacr_clear_set() and its helper functions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The hyp code FPSIMD/SVE/SME trap handling logic has some rather messy
open-coded manipulation of CPTR/CPACR. This is benign for non-nested
guests, but broken for nested guests, as the guest hypervisor's CPTR
configuration is not taken into account.
Consider the case where L0 provides FPSIMD+SVE to an L1 guest
hypervisor, and the L1 guest hypervisor only provides FPSIMD to an L2
guest (with L1 configuring CPTR/CPACR to trap SVE usage from L2). If the
L2 guest triggers an FPSIMD trap to the L0 hypervisor,
kvm_hyp_handle_fpsimd() will see that the vCPU supports FPSIMD+SVE, and
will configure CPTR/CPACR to NOT trap FPSIMD+SVE before returning to the
L2 guest. Consequently the L2 guest would be able to manipulate SVE
state even though the L1 hypervisor had configured CPTR/CPACR to forbid
this.
Clean this up, and fix the nested virt issue by always using
__deactivate_cptr_traps() and __activate_cptr_traps() to manage the CPTR
traps. This removes the need for the ad-hoc fixup in
kvm_hyp_save_fpsimd_host(), and ensures that any guest hypervisor
configuration of CPTR/CPACR is taken into account.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-6-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There's no need for fpsimd_sve_sync() to write to CPTR/CPACR. All
relevant traps are always disabled earlier within __kvm_vcpu_run(), when
__deactivate_cptr_traps() configures CPTR/CPACR.
With irrelevant details elided, the flow is:
handle___kvm_vcpu_run(...)
{
flush_hyp_vcpu(...) {
fpsimd_sve_flush(...);
}
__kvm_vcpu_run(...) {
__activate_traps(...) {
__activate_cptr_traps(...);
}
do {
__guest_enter(...);
} while (...);
__deactivate_traps(....) {
__deactivate_cptr_traps(...);
}
}
sync_hyp_vcpu(...) {
fpsimd_sve_sync(...);
}
}
Remove the unnecessary write to CPTR/CPACR. An ISB is still necessary,
so a comment is added to describe this requirement.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The NVHE/HVHE and VHE modes have separate implementations of
__activate_cptr_traps() and __deactivate_cptr_traps() in their
respective switch.c files. There's some duplication of logic, and it's
not currently possible to reuse this logic elsewhere.
Move the logic into the common switch.h header so that it can be reused,
and de-duplicate the common logic.
This rework changes the way SVE traps are deactivated in VHE mode,
aligning it with NVHE/HVHE modes:
* Before this patch, VHE's __deactivate_cptr_traps() would
unconditionally enable SVE for host EL2 (but not EL0), regardless of
whether the ARM64_SVE cpucap was set.
* After this patch, VHE's __deactivate_cptr_traps() will take the
ARM64_SVE cpucap into account. When ARM64_SVE is not set, SVE will be
trapped from EL2 and below.
The old and new behaviour are both benign:
* When ARM64_SVE is not set, the host will not touch SVE state, and will
not reconfigure SVE traps. Host EL0 access to SVE will be trapped as
expected.
* When ARM64_SVE is set, the host will configure EL0 SVE traps before
returning to EL0 as part of reloading the EL0 FPSIMD/SVE/SME state.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-4-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently there is no ISB between __deactivate_cptr_traps() disabling
traps that affect EL2 and fpsimd_lazy_switch_to_host() manipulating
registers potentially affected by CPTR traps.
When NV is not in use, this is safe because the relevant registers are
only accessed when guest_owns_fp_regs() && vcpu_has_sve(vcpu), and this
also implies that SVE traps affecting EL2 have been deactivated prior to
__guest_entry().
When NV is in use, a guest hypervisor may have configured SVE traps for
a nested context, and so it is necessary to have an ISB between
__deactivate_cptr_traps() and fpsimd_lazy_switch_to_host().
Due to the current lack of an ISB, when a guest hypervisor enables SVE
traps in CPTR, the host can take an unexpected SVE trap from within
fpsimd_lazy_switch_to_host(), e.g.
| Unhandled 64-bit el1h sync exception on CPU1, ESR 0x0000000066000000 -- SVE
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| pstate: 604023c9 (nZCv DAIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __kvm_vcpu_run+0x6f4/0x844
| lr : __kvm_vcpu_run+0x150/0x844
| sp : ffff800083903a60
| x29: ffff800083903a90 x28: ffff000801f4a300 x27: 0000000000000000
| x26: 0000000000000000 x25: ffff000801f90000 x24: ffff000801f900f0
| x23: ffff800081ff7720 x22: 0002433c807d623f x21: ffff000801f90000
| x20: ffff00087f730730 x19: 0000000000000000 x18: 0000000000000000
| x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
| x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
| x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
| x8 : 0000000000000000 x7 : 0000000000000000 x6 : ffff000801f90d70
| x5 : 0000000000001000 x4 : ffff8007fd739000 x3 : ffff000801f90000
| x2 : 0000000000000000 x1 : 00000000000003cc x0 : ffff800082f9d000
| Kernel panic - not syncing: Unhandled exception
| CPU: 1 UID: 0 PID: 164 Comm: kvm-vcpu-0 Not tainted 6.15.0-rc4-00138-ga05e0f012c05 #3 PREEMPT
| Hardware name: FVP Base RevC (DT)
| Call trace:
| show_stack+0x18/0x24 (C)
| dump_stack_lvl+0x60/0x80
| dump_stack+0x18/0x24
| panic+0x168/0x360
| __panic_unhandled+0x68/0x74
| el1h_64_irq_handler+0x0/0x24
| el1h_64_sync+0x6c/0x70
| __kvm_vcpu_run+0x6f4/0x844 (P)
| kvm_arm_vcpu_enter_exit+0x64/0xa0
| kvm_arch_vcpu_ioctl_run+0x21c/0x870
| kvm_vcpu_ioctl+0x1a8/0x9d0
| __arm64_sys_ioctl+0xb4/0xf4
| invoke_syscall+0x48/0x104
| el0_svc_common.constprop.0+0x40/0xe0
| do_el0_svc+0x1c/0x28
| el0_svc+0x30/0xcc
| el0t_64_sync_handler+0x10c/0x138
| el0t_64_sync+0x198/0x19c
| SMP: stopping secondary CPUs
| Kernel Offset: disabled
| CPU features: 0x0000,000002c0,02df4fb9,97ee773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: Unhandled exception ]---
Fix this by adding an ISB between __deactivate_traps() and
fpsimd_lazy_switch_to_host().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250617133718.4014181-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When KVM runs in non-protected VHE mode, there's no context
synchronization event between __debug_switch_to_host() restoring the
host debug registers and __kvm_vcpu_run() unmasking debug exceptions.
Due to this, it's theoretically possible for the host to take an
unexpected debug exception due to the stale guest configuration.
This cannot happen in NVHE/HVHE mode as debug exceptions are masked in
the hyp code, and the exception return to the host will provide the
necessary context synchronization before debug exceptions can be taken.
For now, avoid the problem by adding an ISB after VHE hyp code restores
the host debug registers.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250617133718.4014181-2-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Since in v6.8-rc1, the of_node symlink under tty devices is
missing. This breaks any udev rules relying on this information.
Link the of_node information in the serial controller device with the
parent defined in the device tree. This will also apply to the serial
device which takes the serial controller as a parent device.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan Stewart <astewart@tektelic.com>
Link: https://lore.kernel.org/r/20250617164819.13912-1-astewart@tektelic.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the correct function parameter name in ucs_get_fallback() to prevent
kernel-doc warnings:
Warning: drivers/tty/vt/ucs.c:218 function parameter 'cp' not described in 'ucs_get_fallback'
Warning: drivers/tty/vt/ucs.c:218 Excess function parameter 'base' description in 'ucs_get_fallback'
Fixes: fe26933cf1e1 ("vt: add ucs_get_fallback()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Nicolas Pitre <npitre@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>.
Link: https://lore.kernel.org/r/20250611020229.2650595-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Programs using poll() on /dev/vcsa to be notified when VT changes occur
were missing one case: the switch from gfx to text mode.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This reverts commit 6ccb83d6c4972ebe6ae49de5eba051de3638362c.
Commit 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state()
helper") was introduced to workaround watchdog timeout issues on some
platforms, allowing xhci_reset() to bail out early without waiting
for the reset to complete.
Skipping the xhci handshake during a reset is a dangerous move. The
xhci specification explicitly states that certain registers cannot
be accessed during reset in section 5.4.1 USB Command Register (USBCMD),
Host Controller Reset (HCRST) field:
"This bit is cleared to '0' by the Host Controller when the reset
process is complete. Software cannot terminate the reset process
early by writinga '0' to this bit and shall not write any xHC
Operational or Runtime registers until while HCRST is '1'."
This behavior causes a regression on SNPS DWC3 USB controller with
dual-role capability. When the DWC3 controller exits host mode and
removes xhci while a reset is still in progress, and then tries to
configure its hardware for device mode, the ongoing reset leads to
register access issues; specifically, all register reads returns 0.
These issues extend beyond the xhci register space (which is expected
during a reset) and affect the entire DWC3 IP block, causing the DWC3
device mode to malfunction.
Cc: stable <stable@kernel.org>
Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper")
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20250522190912.457583-3-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
xhci_reset() currently returns -ENODEV if XHCI_STATE_REMOVING is
set, without completing the xhci handshake, unless the reset completes
exceptionally quickly. This behavior causes a regression on Synopsys
DWC3 USB controllers with dual-role capabilities.
Specifically, when a DWC3 controller exits host mode and removes xhci
while a reset is still in progress, and then attempts to configure its
hardware for device mode, the ongoing, incomplete reset leads to
critical register access issues. All register reads return zero, not
just within the xHCI register space (which might be expected during a
reset), but across the entire DWC3 IP block.
This patch addresses the issue by preventing xhci_reset() from being
called in xhci_resume() and bailing out early in the reinit flow when
XHCI_STATE_REMOVING is set.
Cc: stable <stable@kernel.org>
Fixes: 6ccb83d6c497 ("usb: xhci: Implement xhci_handshake_check_state() helper")
Suggested-by: Mathias Nyman <mathias.nyman@intel.com>
Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20250522190912.457583-2-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
Example
CPU1: CPU2:
gserial_connect() // lock
gs_close() // await lock
gs_start_rx() // unlock
usb_ep_queue()
gs_close() // lock, reset port.tty and unlock
gs_start_rx() // lock
tty_wakeup() // NPE
Fixes: 35f95fd7f234 ("TTY: usb/u_serial, use tty from tty_port")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/linux-usb/20240116141801.396398-1-khtsai@google.com/
Link: https://lore.kernel.org/r/20250617050844.1848232-2-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit ffd603f214237e250271162a5b325c6199a65382.
Commit ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in
gs_start_io") adds null pointer checks at the beginning of the
gs_start_io() function to prevent a null pointer dereference. However,
these checks are redundant because the function's comment already
requires callers to hold the port_lock and ensure port.tty and port_usb
are not null. All existing callers already follow these rules.
The true cause of the null pointer dereference is a race condition. When
gs_start_io() calls either gs_start_rx() or gs_start_tx(), the port_lock
is temporarily released for usb_ep_queue(). This allows port.tty and
port_usb to be cleared.
Fixes: ffd603f21423 ("usb: gadget: u_serial: Add null pointer check in gs_start_io")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Reviewed-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250617050844.1848232-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Shawn and John reported a hang issue during system suspend as below:
- USB gadget is enabled as Ethernet
- There is data transfer over USB Ethernet (scp a big file between host
and device)
- Device is going in/out suspend (echo mem > /sys/power/state)
The root cause is the USB device controller is suspended but the USB bus
is still active which caused the USB host continues to transfer data with
device and the device continues to queue USB requests (in this case, a
delayed TCP ACK packet trigger the issue) after controller is suspended,
however the USB controller clock is already gated off. Then if udc driver
access registers after that point, the system will hang.
The correct way to avoid such issue is to disconnect device from host when
the USB bus is not at suspend state. Then the host will receive disconnect
event and stop data transfer in time. To continue make USB gadget device
work after system resume, this will reconnect device automatically.
To make usb wakeup work if USB bus is already at suspend state, this will
keep connection for it only when USB device controller has enabled wakeup
capability.
Reported-by: Shawn Guo <shawnguo@kernel.org>
Reported-by: John Ernberg <john.ernberg@actia.se>
Closes: https://lore.kernel.org/linux-usb/aEZxmlHmjeWcXiF3@dragon/
Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP
Fixes: 235ffc17d014 ("usb: chipidea: udc: add suspend/resume support for device controller")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250614124914.207540-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device link to the USB4 host interface has to be removed
manually since it's no longer auto removed.
Fixes: 623dae3e7084 ("usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links")
Cc: stable <stable@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20250611111415.2707865-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
USB3 devices connected behind several external suspended hubs may not
be detected when plugged in due to aggressive hub runtime pm suspend.
The hub driver immediately runtime-suspends hubs if there are no
active children or port activity.
There is a delay between the wake signal causing hub resume, and driver
visible port activity on the hub downstream facing ports.
Most of the LFPS handshake, resume signaling and link training done
on the downstream ports is not visible to the hub driver until completed,
when device then will appear fully enabled and running on the port.
This delay between wake signal and detectable port change is even more
significant with chained suspended hubs where the wake signal will
propagate upstream first. Suspended hubs will only start resuming
downstream ports after upstream facing port resumes.
The hub driver may resume a USB3 hub, read status of all ports, not
yet see any activity, and runtime suspend back the hub before any
port activity is visible.
This exact case was seen when conncting USB3 devices to a suspended
Thunderbolt dock.
USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating
USB3 devices expect to be resumed within 100ms after signaling wake.
if not then device will resend the wake signal.
Give the USB3 hubs twice this time (200ms) to detect any port
changes after resume, before allowing hub to runtime suspend again.
Cc: stable <stable@kernel.org>
Fixes: 2839f5bcfcfc ("USB: Turn on auto-suspend for USB 3.0 hubs.")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250611112441.2267883-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some varieties of this device don't work with
RESET_RESUME alone.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250605122852.1440382-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When dwc3_gadget_soft_disconnect() fails, dwc3_suspend_common() keeps
going with the suspend, resulting in a period where the power domain is
off, but the gadget driver remains connected. Within this time frame,
invoking vbus_event_work() will cause an error as it attempts to access
DWC3 registers for endpoint disabling after the power domain has been
completely shut down.
Abort the suspend sequence when dwc3_gadget_suspend() cannot halt the
controller and proceeds with a soft connect.
Fixes: 9f8a67b65a49 ("usb: dwc3: gadget: fix gadget suspend/resume")
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250528100315.2162699-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It doesn't need to do it, and the related command event returns
'Slot Not Enabled Error' status.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Suggested-by: Hongliang Yang <hongliang.yang@cixtech.com>
Reviewed-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Link: https://lore.kernel.org/r/20250619013413.35817-1-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The semantics are that caller of fbnic_mbx_map_msg() retains
the ownership of the message on error. All existing callers
dutifully free the page.
Fixes: da3cde08209e ("eth: fbnic: Add FW communication mechanism")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250616195510.225819-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Using the of_fwnode_handle() means that local 'node' variables are unused
whenever CONFIG_OF is disabled for compile testing:
drivers/mfd/88pm860x-core.c: In function 'device_irq_init':
drivers/mfd/88pm860x-core.c:576:29: error: unused variable 'node' [-Werror=unused-variable]
576 | struct device_node *node = i2c->dev.of_node;
| ^~~~
drivers/mfd/max8925-core.c: In function 'max8925_irq_init':
drivers/mfd/max8925-core.c:659:29: error: unused variable 'node' [-Werror=unused-variable]
659 | struct device_node *node = chip->dev->of_node;
| ^~~~
drivers/mfd/twl4030-irq.c: In function 'twl4030_init_irq':
drivers/mfd/twl4030-irq.c:679:46: error: unused variable 'node' [-Werror=unused-variable]
679 | struct device_node *node = dev->of_node;
| ^~~~
Replace these with the corresponding dev_fwnode() lookups that
keep the code simpler in addition to avoiding the warnings.
Fixes: e3d44f11da04 ("mfd: Switch to irq_domain_create_*()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250520154106.2019525-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Close the GIC FD to free the reference it holds to the VM so that we can
correctly clean up the VM. This also gets rid of the
"KVM: debugfs: duplicate directory 395722-4"
warning when running arch_timer_edge_cases.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250608095402.1131-1-yuzenghui@huawei.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-
Note, the same bug was fixed in x86 by commit bcda70c56f3e ("KVM: x86:
Explicitly treat routing entry type changes as changes").
Fixes: 4bf3693d36af ("KVM: arm64: Unmap vLPIs affected by changes to GSI routing information")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250611224604.313496-3-seanjc@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Wei-Lin reports that the tracking of shadow list registers is
majorly broken when resync'ing the L2 state after a run, as
we confuse the guest's LR index with the host's, potentially
losing the interrupt state.
While this could be fixed by adding yet another side index to
track it (Wei-Lin's fix), it may be better to refactor this
code to avoid having a side index altogether, limiting the
risk to introduce this class of bugs.
A key observation is that the shadow index is always the number
of bits in the lr_map bitmap. With that, the parallel indexing
scheme can be completely dropped.
While doing this, introduce a couple of helpers that abstract
the index conversion and some of the LR repainting, making the
whole exercise much simpler.
Reported-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250614145721.2504524-1-r09922117@csie.ntu.edu.tw
Link: https://lore.kernel.org/r/86qzzkc5xa.wl-maz@kernel.org
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.16-2025-06-18:
amdgpu:
- DP tunneling fix
- LTTPR fix
- DSC fix
- DML2.x ABGR16161616 fix
- RMCM fix
- Backlight fixes
- GFX11 kicker support
- SDMA reset fixes
- VCN 5.0.1 fix
- Reset fix
- Misc small fixes
amdkfd:
- SDMA reset fix
- Fix race in GWS scheduling
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250618203115.1533451-1-alexander.deucher@amd.com
|
|
Crafted encoded extents could record out-of-range `lstart`, which should
not happen in normal cases.
It caused an iomap_iter_done() complaint [1] reported by syzbot.
[1] https://lore.kernel.org/r/684cb499.a00a0220.c6bd7.0010.GAE@google.com
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Reported-and-tested-by: syzbot+d8f000c609f05f52d9b5@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d8f000c609f05f52d9b5
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250619032839.2642193-1-hsiangkao@linux.alibaba.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aFJfykDpUwtmpilE@jlahtine-mobl
|
|
BPF_MAP_TYPE_LRU_HASH can recycle most recent elements well before the
map is full, due to percpu reservations and force shrink before
neighbor stealing. Once a CPU is unable to borrow from the global map,
it will once steal one elem from a neighbor and after that each time
flush this one element to the global list and immediately recycle it.
Batch value LOCAL_FREE_TARGET (128) will exhaust a 10K element map
with 79 CPUs. CPU 79 will observe this behavior even while its
neighbors hold 78 * 127 + 1 * 15 == 9921 free elements (99%).
CPUs need not be active concurrently. The issue can appear with
affinity migration, e.g., irqbalance. Each CPU can reserve and then
hold onto its 128 elements indefinitely.
Avoid global list exhaustion by limiting aggregate percpu caches to
half of map size, by adjusting LOCAL_FREE_TARGET based on cpu count.
This change has no effect on sufficiently large tables.
Similar to LOCAL_NR_SCANS and lru->nr_scans, introduce a map variable
lru->free_target. The extra field fits in a hole in struct bpf_lru.
The cacheline is already warm where read in the hot path. The field is
only accessed with the lru lock held.
Tested-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250618215803.3587312-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
David Wei says:
====================
net: fix passive TFO socket having invalid NAPI ID
Found a bug where an accepted passive TFO socket returns an invalid NAPI
ID (i.e. 0) from SO_INCOMING_NAPI_ID. Add a selftest for this using
netdevsim and fix the bug.
Patch 1 is a drive-by fix for the lib.sh include in an existing
drivers/net/netdevsim/peer.sh selftest.
Patch 2 adds a test binary for a simple TFO server/client.
Patch 3 adds a selftest for checking that the NAPI ID of a passive TFO
socket is valid. This will currently fail.
Patch 4 adds a fix for the bug.
====================
Link: https://patch.msgid.link/20250617212102.175711-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a bug with passive TFO sockets returning an invalid NAPI ID 0
from SO_INCOMING_NAPI_ID. Normally this is not an issue, but zero copy
receive relies on a correct NAPI ID to process sockets on the right
queue.
Fix by adding a sk_mark_napi_id_set().
Fixes: e5907459ce7e ("tcp: Record Rx hash and NAPI ID in tcp_child_process")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250617212102.175711-5-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a test that checks that the NAPI ID of a passive TFO socket is valid
i.e. not zero.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250617212102.175711-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a simple passive TFO server and client test binary. This will be
used to test the SO_INCOMING_NAPI_ID of passive TFO accepted sockets.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250617212102.175711-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the peer.sh test to run from INSTALL_PATH.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250617212102.175711-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull smb server fixes from Steve French:
- Fix alternate data streams bug
- Important fix for null pointer deref with Kerberos authentication
- Fix oops in smbdirect (RDMA) in free_transport
* tag '6.16-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: handle set/get info file for streamed file
ksmbd: fix null pointer dereference in destroy_previous_session
ksmbd: add free_transport ops in ksmbd connection
|
|
fstest reports a f2fs bug:
generic/363 42s ... [failed, exit status 1]- output mismatch (see /share/git/fstests/results//generic/363.out.bad)
--- tests/generic/363.out 2025-01-12 21:57:40.271440542 +0800
+++ /share/git/fstests/results//generic/363.out.bad 2025-05-19 19:55:58.000000000 +0800
@@ -1,2 +1,78 @@
QA output created by 363
fsx -q -S 0 -e 1 -N 100000
+READ BAD DATA: offset = 0xd6fb, size = 0xf044, fname = /mnt/f2fs/junk
+OFFSET GOOD BAD RANGE
+0x1540d 0x0000 0x2a25 0x0
+operation# (mod 256) for the bad data may be 37
+0x1540e 0x0000 0x2527 0x1
...
(Run 'diff -u /share/git/fstests/tests/generic/363.out /share/git/fstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
The root cause is user can update post-eof page via mmap [1], however, f2fs
missed to zero post-eof page in below operations, so, once it expands i_size,
then it will include dummy data locates previous post-eof page, so during
below operations, we need to zero post-eof page.
Operations which can include dummy data after previous i_size after expanding
i_size:
- write
- mapwrite [1]
- truncate
- fallocate
* preallocate
* zero_range
* insert_range
* collapse_range
- clone_range (doesn’t support in f2fs)
- copy_range (doesn’t support in f2fs)
[1] https://man7.org/linux/man-pages/man2/mmap.2.html 'BUG section'
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix a race condition in Devres::drop(). This depends on two other
patches:
- (Minimal) Rust abstractions for struct completion
- Let Revocable indicate whether its data is already being revoked
- Fix Devres to avoid exposing the internal Revocable
- Add .mailmap entry for Danilo Krummrich
- Add Madhavan Srinivasan to embargoed-hardware-issues.rst
* tag 'driver-core-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
mailmap: add entry for Danilo Krummrich
rust: devres: do not dereference to the internal Revocable
rust: devres: fix race in Devres::drop()
rust: revocable: indicate whether `data` has been revoked already
rust: completion: implement initial abstraction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fix from Tejun Heo:
- In cgroup1 freezer, a task migrating into a frozen cgroup might not
get frozen immediately due to the wrong operation order. Fix it.
* tag 'cgroup-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup,freezer: fix incomplete freezing when attaching tasks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
- Fix missed early init of wq_isolated_cpumask
* tag 'wq-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Initialize wq_isolated_cpumask in workqueue_init_early()
|
|
The reproduction steps:
1. create a tun interface
2. enable l2 bearer
3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun
tipc: Started in network mode
tipc: Node identity 8af312d38a21, cluster identity 4711
tipc: Enabled bearer <eth:syz_tun>, priority 1
Oops: general protection fault
KASAN: null-ptr-deref in range
CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT
Hardware name: QEMU Ubuntu 24.04 PC
RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0
the ub was in fact a struct dev.
when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or
other media when other thread changes it.
fix this by checking media_id.
Fixes: 832629ca5c313 ("tipc: add UDP remoteip dump to netlink API")
Signed-off-by: Haixia Qu <hxqu@hillstonenet.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20250617055624.2680-1-hxqu@hillstonenet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NIX block can receive packets from multiple links such as
MAC (RPM), LBK and CPT.
-----------------
RPM --| NIX |
-----------------
|
|
LBK
Each link supports multiple channels for example RPM link supports
16 channels. In case of link oversubsribe, NIX will assert backpressure
on receive channels.
The previous patch considered a single channel per link, resulting in
backpressure not being enabled on the remaining channels
Fixes: a7ef63dbd588 ("octeontx2-af: Disable backpressure between CPT and NIX")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617063403.3582210-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix a couple bugs in cgroup cpu.weight support
- Add the new sched-ext@lists.linux.dev to MAINTAINERS
* tag 'sched_ext-for-6.16-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext, sched/core: Don't call scx_group_set_weight() prematurely from sched_create_group()
sched_ext: Make scx_group_set_weight() always update tg->scx.weight
sched_ext: Update mailing list entry in MAINTAINERS
|
