| Age | Commit message (Collapse) | Author |
|---|
|
David Howells <dhowells@redhat.com> says:
Here are a couple of patches that fix the use of fscaching with ceph:
(1) Fix the read collector to mark the write request that it creates to copy
data to the cache with NETFS_RREQ_OFFLOAD_COLLECTION so that it will run
the write collector on a workqueue as it's meant to run in the background
and the app isn't going to wait for it.
(2) Fix the read collector to wake up the copy-to-cache write request after
it sets NETFS_RREQ_ALL_QUEUED if the write request doesn't have any
subrequests left on it. ALL_QUEUED indicates that there won't be any
more subreqs coming and the collector should clean up - except that an
event is needed to trigger that, but it only gets events from subreq
termination and so the last event can beat us to setting ALL_QUEUED.
* patches from https://lore.kernel.org/20250711151005.2956810-1-dhowells@redhat.com:
netfs: Fix race between cache write completion and ALL_QUEUED being set
netfs: Fix copy-to-cache so that it performs collection with ceph+fscache
Link: https://lore.kernel.org/20250711151005.2956810-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When netfslib is issuing subrequests, the subrequests start processing
immediately and may complete before we reach the end of the issuing
function. At the end of the issuing function we set NETFS_RREQ_ALL_QUEUED
to indicate to the collector that we aren't going to issue any more subreqs
and that it can do the final notifications and cleanup.
Now, this isn't a problem if the request is synchronous
(NETFS_RREQ_OFFLOAD_COLLECTION is unset) as the result collection will be
done in-thread and we're guaranteed an opportunity to run the collector.
However, if the request is asynchronous, collection is primarily triggered
by the termination of subrequests queuing it on a workqueue. Now, a race
can occur here if the app thread sets ALL_QUEUED after the last subrequest
terminates.
This can happen most easily with the copy2cache code (as used by Ceph)
where, in the collection routine of a read request, an asynchronous write
request is spawned to copy data to the cache. Folios are added to the
write request as they're unlocked, but there may be a delay before
ALL_QUEUED is set as the write subrequests may complete before we get
there.
If all the write subreqs have finished by the ALL_QUEUED point, no further
events happen and the collection never happens, leaving the request
hanging.
Fix this by queuing the collector after setting ALL_QUEUED. This is a bit
heavy-handed and it may be sufficient to do it only if there are no extant
subreqs.
Also add a tracepoint to cross-reference both requests in a copy-to-request
operation and add a trace to the netfs_rreq tracepoint to indicate the
setting of ALL_QUEUED.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/CAKPOu+8z_ijTLHdiCYGU_Uk7yYD=shxyGLwfe-L7AV3DhebS3w@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250711151005.2956810-3-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The netfs copy-to-cache that is used by Ceph with local caching sets up a
new request to write data just read to the cache. The request is started
and then left to look after itself whilst the app continues. The request
gets notified by the backing fs upon completion of the async DIO write, but
then tries to wake up the app because NETFS_RREQ_OFFLOAD_COLLECTION isn't
set - but the app isn't waiting there, and so the request just hangs.
Fix this by setting NETFS_RREQ_OFFLOAD_COLLECTION which causes the
notification from the backing filesystem to put the collection onto a work
queue instead.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/CAKPOu+8z_ijTLHdiCYGU_Uk7yYD=shxyGLwfe-L7AV3DhebS3w@mail.gmail.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250711151005.2956810-2-dhowells@redhat.com
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Viacheslav Dubeyko <slava@dubeyko.com>
cc: Alex Markuze <amarkuze@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: netfs@lists.linux.dev
cc: ceph-devel@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
[into #fixes, unless somebody objects]
Lifetime of new_dn_mark is controlled by that of its ->fsn_mark,
pointed to by new_fsn_mark. Unfortunately, a failure exit had
been inserted between the allocation of new_dn_mark and the
call of fsnotify_init_mark(), ending up with a leak.
Fixes: 1934b212615d "file: reclaim 24 bytes from f_owner"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250712171843.GB1880847@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In the buffer write path, iomap_set_range_uptodate() is called every
time iomap_end_write() is called. But if folio_test_uptodate() holds, we
know that all blocks in this folio are already in the uptodate state, so
there is no need to go deep into the critical section of state_lock to
execute bitmap_set().
This is because the folios always creep towards ifs_is_fully_uptodate()
state and once they've gotten there folio_mark_uptodate() is called, which
means the folio is uptodate.
Then once a folio is uptodate, there is no route back to !uptodate without
going through the removal of the folio from the page cache. Therefore, it's
fine to use folio_test_uptodate() to short-circuit unnecessary code paths.
Although state_lock may not have significant lock contention due to
folio lock, this patch at least reduces the number of instructions,
especially the expensive lock-prefixed instructions.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Link: https://lore.kernel.org/20250711081207.1782667-1-alexjlzheng@tencent.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Verify that the inode mode is sane when loading it from the disk to
avoid complaints from VFS about setting up invalid inodes.
Reported-by: syzbot+895c23f6917da440ed0d@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250709095545.31062-2-jack@suse.cz
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In __cachefiles_write(), if the return value of the write operation > 0, it
is set to 0. This makes it impossible to distinguish scenarios where a
partial write has occurred, and will affect the outer calling functions:
1) cachefiles_write_complete() will call "term_func" such as
netfs_write_subrequest_terminated(). When "ret" in __cachefiles_write()
is used as the "transferred_or_error" of this function, it can not
distinguish the amount of data written, makes the WARN meaningless.
2) cachefiles_ondemand_fd_write_iter() can only assume all writes were
successful by default when "ret" is 0, and unconditionally return the full
length specified by user space.
Fix it by modifying "ret" to reflect the actual number of bytes written.
Furthermore, returning a value greater than 0 from __cachefiles_write()
does not affect other call paths, such as cachefiles_issue_write() and
fscache_write().
Fixes: 047487c947e8 ("cachefiles: Implement the I/O routines")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Link: https://lore.kernel.org/20250703024418.2809353-1-wozizhi@huaweicloud.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Anonymous inodes may never ever be exectuable and the only way to
enforce this is to raise SB_I_NOEXEC on the superblock which can never
be unset. I've made the exec code yell at anyone who does not abide by
this rule.
For good measure also kill any pretense that device nodes are supported
on the secretmem filesystem.
> WARNING: fs/exec.c:119 at path_noexec+0x1af/0x200 fs/exec.c:118, CPU#1: syz-executor260/5835
> Modules linked in:
> CPU: 1 UID: 0 PID: 5835 Comm: syz-executor260 Not tainted 6.16.0-rc4-next-20250703-syzkaller #0 PREEMPT(full)
> Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
> RIP: 0010:path_noexec+0x1af/0x200 fs/exec.c:118
> Code: 02 31 ff 48 89 de e8 f0 b1 89 ff d1 eb eb 07 e8 07 ad 89 ff b3 01 89 d8 5b 41 5e 41 5f 5d c3 cc cc cc cc cc e8 f2 ac 89 ff 90 <0f> 0b 90 e9 48 ff ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c a6
> RSP: 0018:ffffc90003eefbd8 EFLAGS: 00010293
> RAX: ffffffff8235f22e RBX: ffff888072be0940 RCX: ffff88807763bc00
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
> RBP: 0000000000080000 R08: ffff88807763bc00 R09: 0000000000000003
> R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000011
> R13: 1ffff920007ddf90 R14: 0000000000000000 R15: dffffc0000000000
> FS: 000055556832d380(0000) GS:ffff888125d1e000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f21e34810d0 CR3: 00000000718a8000 CR4: 00000000003526f0
> Call Trace:
> <TASK>
> do_mmap+0xa43/0x10d0 mm/mmap.c:472
> vm_mmap_pgoff+0x31b/0x4c0 mm/util.c:579
> ksys_mmap_pgoff+0x51f/0x760 mm/mmap.c:607
> do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
> do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
> entry_SYSCALL_64_after_hwframe+0x77/0x7f
> RIP: 0033:0x7f21e340a9f9
> Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
> RSP: 002b:00007ffd23ca3468 EFLAGS: 00000246 ORIG_RAX: 0000000000000009
> RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f21e340a9f9
> RDX: 0000000000000000 RSI: 0000000000004000 RDI: 0000200000ff9000
> RBP: 00007f21e347d5f0 R08: 0000000000000003 R09: 0000000000000000
> R10: 0000000000000011 R11: 0000000000000246 R12: 0000000000000001
> R13: 431bde82d7b634db R14: 0000000000000001 R15: 0000000000000001
Link: https://lore.kernel.org/686ba948.a00a0220.c7b3.0080.GAE@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In Commit 1d8db6fd698de1f73b1a7d72aea578fdd18d9a87 ("pidfs,
coredump: add PIDFD_INFO_COREDUMP"), the following code was added:
if (mask & PIDFD_INFO_COREDUMP) {
kinfo.mask |= PIDFD_INFO_COREDUMP;
kinfo.coredump_mask = READ_ONCE(pidfs_i(inode)->__pei.coredump_mask);
}
[...]
if (!(kinfo.mask & PIDFD_INFO_COREDUMP)) {
task_lock(task);
if (task->mm)
kinfo.coredump_mask = pidfs_coredump_mask(task->mm->flags);
task_unlock(task);
}
The second bit in particular looks off to me - the condition in essence
checks whether PIDFD_INFO_COREDUMP was **not** requested, and if so
fetches the coredump_mask in kinfo, since it's checking !(kinfo.mask &
PIDFD_INFO_COREDUMP), which is unconditionally set in the earlier hunk.
I'm tempted to assume the idea in the second hunk was to calculate the
coredump mask if one was requested but fetched in the first hunk, in
which case the check should be
if ((kinfo.mask & PIDFD_INFO_COREDUMP) && !(kinfo.coredump_mask))
which might be more legibly written as
if ((mask & PIDFD_INFO_COREDUMP) && !(kinfo.coredump_mask))
This could also instead be achieved by changing the first hunk to be:
if (mask & PIDFD_INFO_COREDUMP) {
kinfo.coredump_mask = READ_ONCE(pidfs_i(inode)->__pei.coredump_mask);
if (kinfo.coredump_mask)
kinfo.mask |= PIDFD_INFO_COREDUMP;
}
and the second hunk to:
if ((mask & PIDFD_INFO_COREDUMP) && !(kinfo.mask & PIDFD_INFO_COREDUMP)) {
task_lock(task);
if (task->mm) {
kinfo.coredump_mask = pidfs_coredump_mask(task->mm->flags);
kinfo.mask |= PIDFD_INFO_COREDUMP;
}
task_unlock(task);
}
However, when looking at this, the supposition that the second hunk
means to cover cases where the coredump info was requested but the first
hunk failed to get it starts getting doubtful, so apologies if I'm
completely off-base.
This patch addresses the issue by fixing the check in the second hunk.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Link: https://lore.kernel.org/20250703120244.96908-3-laurabrehm@hey.com
Cc: brauner@kernel.org
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
Pull /proc/sys dcache lookup fix from Al Viro:
"Fix for the breakage spotted by Neil in the interplay between
/proc/sys ->d_compare() weirdness and parallel lookups"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix proc_sys_compare() handling of in-lookup dentries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix the calculation of the deadline server task's runtime as this
mishap was preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
* tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server runtime calculation formula
sched/core: Fix migrate_swap() vs. hotplug
sched: Fix preemption string of preempt_dynamic_none
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
- Fix the compilation of an x86 kernel on a big engian machine due to a
missed endianness conversion
* tag 'objtool_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add missing endian conversion to read_annotate()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Revert uprobes to using CAP_SYS_ADMIN again as currently they can
destructively modify kernel code from an unprivileged process
- Move a warning to where it belongs
* tag 'perf_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Revert to requiring CAP_SYS_ADMIN for uprobes
perf/core: Fix the WARN_ON_ONCE is out of lock protected region
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
- Make sure AMD SEV guests using secure TSC, include a TSC_FACTOR which
prevents their TSCs from going skewed from the hypervisor's
* tag 'x86_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Disable FUTEX_PRIVATE_HASH for this cycle due to a performance
regression
- Add a selftests compilation product to the corresponding .gitignore
file
* tag 'locking_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Add futex_numa to .gitignore
futex: Temporary disable FUTEX_PRIVATE_HASH
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Initialize sysfs attributes properly to avoid lockdep complaining
about an uninitialized lock class
* tag 'edac_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC: Initialize EDAC features sysfs attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS fixes from Borislav Petkov:
- Do not remove the MCE sysfs hierarchy if thresholding sysfs nodes
init fails due to new/unknown banks present, which in itself is not
fatal anyway; add default names for new banks
- Make sure MCE polling settings are honored after CMCI storms
- Make sure MCE threshold limit is reset after the thresholding
interrupt has been serviced
- Clean up properly and disable CMCI banks on shutdown so that a
second/kexec-ed kernel can rediscover those banks again
* tag 'ras_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Make sure CMCI banks are cleared during shutdown on Intel
x86/mce/amd: Fix threshold limit reset
x86/mce/amd: Add default names for MCA banks and blocks
x86/mce: Ensure user polling settings are honored when restarting timer
x86/mce: Don't remove sysfs if thresholding sysfs init fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Have irq-msi-lib select CONFIG_GENERIC_MSI_IRQ explicitly as it uses
its facilities
* tag 'irq_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-msi-lib: Select CONFIG_GENERIC_MSI_IRQ
|
|
futex_numa was never added to the .gitignore file.
Add it.
Fixes: 9140f57c1c13 ("futex,selftests: Add another FUTEX2_NUMA selftest")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/all/20250704103749.10341-1-terry.tritton@linaro.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- Memory corruption fixes in hid-appletb-kbd driver (Qasim Ijaz)
- New device ID in hid-elecom driver (Leonard Dizon)
- Fixed several HID debugfs contants (Vicki Pfau)
* tag 'hid-for-linus-2025070502' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: appletb-kbd: fix slab use-after-free bug in appletb_kbd_probe
HID: Fix debug name for BTN_GEAR_DOWN, BTN_GEAR_UP, BTN_WHEEL
HID: elecom: add support for ELECOM HUGE 019B variant
HID: appletb-kbd: fix memory corruption of input_handler_list
|
|
Pull smb client fixes from Steve French:
- Two reconnect fixes including one for a reboot/reconnect race
- Fix for incorrect file type that can be returned by SMB3.1.1 POSIX
extensions
- tcon initialization fix
- Fix for resolving Windows symlinks with absolute paths
* tag 'v6.16-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix native SMB symlink traversal
smb: client: fix race condition in negotiate timeout by using more precise timing
cifs: all initializations for tcon should happen in tcon_info_alloc
smb: client: fix warning when reconnecting channel
smb: client: fix readdir returning wrong type with POSIX extensions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- designware: initialise msg_write_idx during transfer
- microchip: check return value from core xfer call
- realtek: add 'reg' property constraint to the device tree
* tag 'i2c-for-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: realtek,rtl9301: Fix missing 'reg' constraint
i2c: microchip-core: re-fix fake detections w/ i2cdetect
i2c/designware: Fix an initialization issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address system suspend failures under memory pressure in some
configurations, fix up RAPL handling on platforms where PL1 cannot be
disabled, and fix a documentation typo:
- Prevent the Intel RAPL power capping driver from allowing PL1 to be
exceeded by mistake on systems when PL1 cannot be disabled (Zhang
Rui)
- Fix a typo in the ABI documentation (Sumanth Gavini)
- Allow swap to be used a bit longer during system suspend and
hibernation to avoid suspend failures under memory pressure (Mario
Limonciello)"
* tag 'pm-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: docs: Replace "diasble" with "disable"
powercap: intel_rapl: Do not change CLAMPING bit if ENABLE bit cannot be changed
PM: Restrict swap use to later in the suspend sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert a problematic ACPI battery driver change merged recently"
* tag 'acpi-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: battery: negate current when discharging"
|
|
Merge fixes related to system sleep for 6.16-rc5:
- Fix typo in the ABI documentation (Sumanth Gavini).
- Allow swap to be used a bit longer during system suspend and
hibernation to avoid suspend failures under memory pressure (Mario
Limonciello).
* pm-sleep:
PM: sleep: docs: Replace "diasble" with "disable"
PM: Restrict swap use to later in the suspend sequence
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"A couple of fixes for firmware drivers have come up, addressing kernel
side bugs in op-tee and ff-a code, as well as compatibility issues
with exynos-acpm and ff-a protocols.
The only devicetree fixes are for the Apple platform, addressing
issues with conformance to the bindings for the wlan, spi and mipi
nodes"
* tag 'soc-fixes-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: apple: Move touchbar mipi {address,size}-cells from dtsi to dts
arm64: dts: apple: Drop {address,size}-cells from SPI NOR
arm64: dts: apple: t8103: Fix PCIe BCM4377 nodename
optee: ffa: fix sleep in atomic context
firmware: exynos-acpm: fix timeouts on xfers handling
arm64: defconfig: update renamed PHY_SNPS_EUSB2
firmware: arm_ffa: Fix the missing entry in struct ffa_indirect_msg_hdr
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
firmware: arm_ffa: Move memory allocation outside the mutex locking
firmware: arm_ffa: Fix memory leak by freeing notifier callback node
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- kCFI is restricted to clang-17 or newer, as earlier versions have
known bugs
- sbi_hsm_hart_start is now staticly allocated, to avoid tripping up
the SBI HSM page mapping on sparse systems.
* tag 'riscv-for-linus-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: cpu_ops_sbi: Use static array for boot_data
riscv: Require clang-17 or newer for kCFI
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few driver fixes (the GPIO one being potentially nasty, though it
has been there for a while without anyone reporting it), and one core
fix for the rarely used combination of coupled regulators and
unbinding"
* tag 'regulator-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: gpio: Fix the out-of-bounds access to drvdata::gpiods
regulator: mp886x: Fix ID table driver_data
regulator: sy8824x: Fix ID table driver_data
regulator: tps65219: Fix devm_kmalloc size allocation
regulator: core: fix NULL dereference on unbind due to stale coupling data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"As well as a few driver specific fixes we've got a core change here
which raises the hard coded limit on the number of devices we can
support on one SPI bus since some FPGA based systems are running into
the existing limit. This is not a good solution but it's one suitable
for this point in the release cycle, we should dynamically size the
relevant data structures which I hope will happen in the next couple
of merge windows.
We also pull in a MTD fix for the Qualcomm SNAND driver, the two fixes
cover the same issue and merging them together minimises bisection
issues"
* tag 'spi-fix-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cadence-quadspi: fix cleanup of rx_chan on failure paths
spi: spi-fsl-dspi: Clear completion counter before initiating transfer
spi: Raise limit on number of chip selects to 24
mtd: nand: qpic_common: prevent out of bounds access of BAM arrays
spi: spi-qpic-snand: reallocate BAM transactions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers fixes from Ilpo Järvinen:
"Mostly a few lines fixed here and there except amd/isp4 which improves
swnodes relationships but that is a new driver not in any stable
kernels yet. The think-lmi driver changes also look relatively large
but there are just many fixes to it.
The i2c/piix4 change is a effectively a revert of the commit
7e173eb82ae9 ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on
CONFIG_X86") but that required moving the header out from arch/x86
under include/linux/platform_data/
Summary:
- amd/isp4: Improve swnode graph (new driver exception)
- asus-nb-wmi: Use duo keyboard quirk for Zenbook Duo UX8406CA
- dell-lis3lv02d: Add Latitude 5500 accelerometer address
- dell-wmi-sysman: Fix WMI data block retrieval and class dev unreg
- hp-bioscfg: Fix class device unregistration
- i2c: piix4: Re-enable on non-x86 + move FCH header under platform_data/
- intel/hid: Wildcat Lake support
- mellanox:
- mlxbf-pmc: Fix duplicate event ID
- mlxbf-tmfifo: Fix vring_desc.len assignment
- mlxreg-lc: Fix bit-not-set logic check
- nvsw-sn2201: Fix bus number in error message & spelling errors
- portwell-ec: Move watchdog device under correct platform hierarchy
- think-lmi: Error handling fixes (sysfs, kset, kobject, class dev unreg)
- thinkpad_acpi: Handle HKEY 0x1402 event (2025 Thinkpads)
- wmi: Fix WMI event enablement"
* tag 'platform-drivers-x86-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (22 commits)
platform/x86: think-lmi: Fix sysfs group cleanup
platform/x86: think-lmi: Fix kobject cleanup
platform/x86: think-lmi: Create ksets consecutively
platform/mellanox: mlxreg-lc: Fix logic error in power state check
i2c: Re-enable piix4 driver on non-x86
Move FCH header to a location accessible by all archs
platform/x86/intel/hid: Add Wildcat Lake support
platform/x86: dell-wmi-sysman: Fix class device unregistration
platform/x86: think-lmi: Fix class device unregistration
platform/x86: hp-bioscfg: Fix class device unregistration
platform/x86: Update swnode graph for amd isp4
platform/x86: dell-wmi-sysman: Fix WMI data block retrieval in sysfs callbacks
platform/x86: wmi: Update documentation of WCxx/WExx ACPI methods
platform/x86: wmi: Fix WMI event enablement
platform/mellanox: nvsw-sn2201: Fix bus number in adapter error message
platform/mellanox: Fix spelling and comment clarity in Mellanox drivers
platform/mellanox: mlxbf-pmc: Fix duplicate event ID for CACHE_DATA1
platform/x86: thinkpad_acpi: handle HKEY 0x1402 event
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8406CA
platform/x86: dell-lis3lv02d: Add Latitude 5500
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 6.16-rc5. I originally wanted this
to get into -rc4, but there were some regressions that had to be
handled first. Now all looks good. Included in here are the following
fixes:
- cdns3 driver fixes
- xhci driver fixes
- typec driver fixes
- USB hub fixes (this is what took the longest to get right)
- new USB driver quirks added
- chipidea driver fixes
All of these have been in linux-next for a while and now we have no
more reported problems with them"
* tag 'usb-6.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: hub: Fix flushing of delayed work used for post resume purposes
xhci: dbc: Flush queued requests before stopping dbc
xhci: dbctty: disable ECHO flag by default
xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS
usb: xhci: quirk for data loss in ISOC transfers
usb: dwc3: gadget: Fix TRB reclaim logic for short transfers and ZLPs
usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm
usb: typec: displayport: Fix potential deadlock
usb: typec: altmodes/displayport: do not index invalid pin_assignments
usb: cdnsp: Fix issue with CV Bad Descriptor test
usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach
Revert "usb: xhci: Implement xhci_handshake_check_state() helper"
usb: xhci: Skip xhci_reset in xhci_resume if xhci is being removed
usb: gadget: u_serial: Fix race condition in TTY wakeup
Revert "usb: gadget: u_serial: Add null pointer check in gs_start_io"
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume
usb: acpi: fix device link removal
usb: hub: fix detection of high tier USB3 devices behind suspended hubs
Logitech C-270 even more broken
usb: dwc3: Abort suspend on soft disconnect failure
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for Acer NGR 200 Controller added to xpad driver
- xpad driver will no longer log errors about URBs at sudden disconnect
- a fix for potential NULL dereference in cs40l50-vibra driver
- several drivers have been switched to using scnprintf() to suppress
warnings about potential output truncation
* tag 'input-for-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cs40l50-vibra - fix potential NULL dereference in cs40l50_upload_owt()
Input: alps - use scnprintf() to suppress truncation warning
Input: iqs7222 - explicitly define number of external channels
Input: xpad - support Acer NGR 200 Controller
Input: xpad - return errors from xpad_try_sending_next_out_packet() up
Input: xpad - adjust error handling for disconnect
Input: apple_z2 - drop default ARCH_APPLE in Kconfig
Input: Fully open-code compatible for grepping
dt-bindings: HID: i2c-hid: elan: Introduce Elan eKTH8D18
Input: psmouse - switch to use scnprintf() to suppress truncation warning
Input: lifebook - switch to use scnprintf() to suppress truncation warning
Input: alps - switch to use scnprintf() to suppress truncation warning
Input: atkbd - switch to use scnprintf() to suppress truncation warning
Input: fsia6b - suppress buffer truncation warning for phys
Input: iqs626a - replace snprintf() with scnprintf()
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, bit of a bumper crop, the usual amdgpu/xe/i915
suspects, then there is a large scattering of fixes across core and
drivers. I think the simple panel lookup fix is probably the largest,
the sched race fix is also fun, but I don't see anything standing out
too badly.
dma-buf:
- fix timeout handling
gem:
- fix framebuffer object references
sched:
- fix spsc queue job count race
bridge:
- fix aux hpd bridge of node
- panel: move missing flag handling
- samsung-dsim: fix %pK usage to %p
panel:
- fix problem with simple panel lookup
ttm:
- fix error path handling
amdgpu:
- SDMA 5.x reset fix
- Add missing firmware declaration
- Fix leak in amdgpu_ctx_mgr_entity_fini()
- Freesync fix
- OLED backlight fix
amdkfd:
- mtype fix for ext coherent system memory
- MMU notifier fix
- gfx7/8 fix
xe:
- Fix chunking the PTE updates and overflowing the maximum number of
dwords with with MI_STORE_DATA_IMM
- Move WA BB to the LRC BO to mitigate hangs on context switch
- Fix frequency/flush WAs for BMG
- Fix kconfig prompt title and description
- Do not require kunit
- Extend 14018094691 WA to BMG
- Fix wedging the device on signal
i915:
- Make mei interrupt top half irq disabled to fix RT builds
- Fix timeline left held on VMA alloc error
- Fix NULL pointer deref in vlv_dphy_param_init()
- Fix selftest mock_request() to avoid NULL deref
exynos:
- switch to using %p instead of %pK
- fix vblank NULL ptr race
- fix lockup on samsung peach-pit/pi chromebooks
vesadrm:
- NULL ptr fix
vmwgfx:
- fix encrypted memory allocation bug
v3d:
- fix irq enabled during reset"
* tag 'drm-fixes-2025-07-04' of https://gitlab.freedesktop.org/drm/kernel: (41 commits)
drm/xe: Do not wedge device on killed exec queues
drm/xe: Extend WA 14018094691 to BMG
drm/v3d: Disable interrupts before resetting the GPU
drm/gem: Acquire references on GEM handles for framebuffers
drm/sched: Increment job count before swapping tail spsc queue
drm/xe: Allow dropping kunit dependency as built-in
drm/xe: Fix kconfig prompt
drm/xe/bmg: Update Wa_22019338487
drm/xe/bmg: Update Wa_14022085890
drm/xe: Split xe_device_td_flush()
drm/xe/xe_guc_pc: Lock once to update stashed frequencies
drm/xe/guc_pc: Add _locked variant for min/max freq
drm/xe: Make WA BB part of LRC BO
drm/xe: Fix out-of-bounds field write in MI_STORE_DATA_IMM
drm/i915/gsc: mei interrupt top half should be in irq disabled context
drm/i915/gt: Fix timeline left held on VMA alloc error
drm/vmwgfx: Fix guests running with TDX/SEV
drm/amd/display: Don't allow OLED to go down to fully off
drm/amd/display: Added case for when RR equals panel's max RR using freesync
drm/amdkfd: add hqd_sdma_get_doorbell callbacks for gfx7/8
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Rockchip: fix infinite loop caused by probing race condition
- Intel VT-d: assign devtlb cache tag on ATS enablement
* tag 'iommu-fixes-v6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Assign devtlb cache tag on ATS enablement
iommu/rockchip: prevent iommus dead loop when two masters share one IOMMU
|
|
Pull block fixes from Jens Axboe:
- NVMe fixes via Christoph:
- fix incorrect cdw15 value in passthru error logging (Alok Tiwari)
- fix memory leak of bio integrity in nvmet (Dmitry Bogdanov)
- refresh visible attrs after being checked (Eugen Hristev)
- fix suspicious RCU usage warning in the multipath code (Geliang Tang)
- correctly account for namespace head reference counter (Nilay Shroff)
- Fix for a regression introduced in ublk in this cycle, where it would
attempt to queue a canceled request.
- brd RCU sleeping fix, also introduced in this cycle. Bare bones fix,
should be improved upon for the next release.
* tag 'block-6.16-20250704' of git://git.kernel.dk/linux:
brd: fix sleeping function called from invalid context in brd_insert_page()
ublk: don't queue request if the associated uring_cmd is canceled
nvme-multipath: fix suspicious RCU usage warning
nvme-pci: refresh visible attrs after being checked
nvmet: fix memory leak of bio integrity
nvme: correctly account for namespace head reference counter
nvme: Fix incorrect cdw15 value in passthru error logging
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.16-rc5
designware: initialise msg_write_idx during transfer
microchip: check return value from core xfer call
realtek: add 'reg' property constraint to the device tree
|
|
Pull bcachefs fixes from Kent Overstreet:
"The 'opts.casefold_disabled' patch is non critical, but would be a
6.15 backport; it's to address the casefolding + overlayfs
incompatibility that was discovvered late.
It's late because I was hoping that this would be addressed on the
overlayfs side (and will be in 6.17), but user reports keep coming in
on this one (lots of people are using docker these days)"
* tag 'bcachefs-2025-07-03' of git://evilpiepirate.org/bcachefs:
bcachefs: opts.casefold_disabled
bcachefs: Work around deadlock to btree node rewrites in journal replay
bcachefs: Fix incorrect transaction restart handling
bcachefs: fix btree_trans_peek_prev_journal()
bcachefs: mark invalid_btree_id autofix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a regression caused by the anonymous inode rework. Making them
regular files causes various places in the kernel to tip over
starting with io_uring.
Revert to the former status quo and port our assertion to be based on
checking the inode so we don't lose the valuable VFS_*_ON_*()
assertions that have already helped discover weird behavior our
outright bugs.
- Fix the the upper bound calculation in fuse_fill_write_pages()
- Fix priority inversion issues in the eventpoll code
- Make secretmen use anon_inode_make_secure_inode() to avoid bypassing
the LSM layer
- Fix a netfs hang due to missing case in final DIO read result
collection
- Fix a double put of the netfs_io_request struct
- Provide some helpers to abstract out NETFS_RREQ_IN_PROGRESS flag
wrangling
- Fix infinite looping in netfs_wait_for_pause/request()
- Fix a netfs ref leak on an extra subrequest inserted into a request's
list of subreqs
- Fix various cifs RPC callbacks to set NETFS_SREQ_NEED_RETRY if a
subrequest fails retriably
- Fix a cifs warning in the workqueue code when reconnecting a channel
- Fix the updating of i_size in netfs to avoid a race between testing
if we should have extended the file with a DIO write and changing
i_size
- Merge the places in netfs that update i_size on write
- Fix coredump socket selftests
* tag 'vfs-6.16-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
anon_inode: rework assertions
netfs: Update tracepoints in a number of ways
netfs: Renumber the NETFS_RREQ_* flags to make traces easier to read
netfs: Merge i_size update functions
netfs: Fix i_size updating
smb: client: set missing retry flag in cifs_writev_callback()
smb: client: set missing retry flag in cifs_readv_callback()
smb: client: set missing retry flag in smb2_writev_callback()
netfs: Fix ref leak on inserted extra subreq in write retry
netfs: Fix looping in wait functions
netfs: Provide helpers to perform NETFS_RREQ_IN_PROGRESS flag wangling
netfs: Fix double put of request
netfs: Fix hang due to missing case in final DIO read result collection
eventpoll: Fix priority inversion problem
fuse: fix fuse_fill_write_pages() upper bound calculation
fs: export anon_inode_make_secure_inode() and fix secretmem LSM bypass
selftests/coredump: Fix "socket_detect_userspace_client" test failure
|
|
In our testing with 6.12 based kernel on a big.LITTLE system, we were
seeing instances of RT tasks being blocked from running on the LITTLE
cpus for multiple seconds of time, apparently by the dl_server. This
far exceeds the default configured 50ms per second runtime.
This is due to the fair dl_server runtime calculation being scaled
for frequency & capacity of the cpu.
Consider the following case under a Big.LITTLE architecture:
Assume the runtime is: 50,000,000 ns, and Frequency/capacity
scale-invariance defined as below:
Frequency scale-invariance: 100
Capacity scale-invariance: 50
First by Frequency scale-invariance,
the runtime is scaled to 50,000,000 * 100 >> 10 = 4,882,812
Then by capacity scale-invariance,
it is further scaled to 4,882,812 * 50 >> 10 = 238,418.
So it will scaled to 238,418 ns.
This smaller "accounted runtime" value is what ends up being
subtracted against the fair-server's runtime for the current period.
Thus after 50ms of real time, we've only accounted ~238us against the
fair servers runtime. This 209:1 ratio in this example means that on
the smaller cpu the fair server is allowed to continue running,
blocking RT tasks, for over 10 seconds before it exhausts its supposed
50ms of runtime. And on other hardware configurations it can be even
worse.
For the fair deadline_server, to prevent realtime tasks from being
unexpectedly delayed, we really do want to use fixed time, and not
scaled time for smaller capacity/frequency cpus. So remove the scaling
from the fair server's accounting to fix this.
Fixes: a110a81c52a9 ("sched/deadline: Deferrable dl server")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: John Stultz <jstultz@google.com>
Signed-off-by: kuyo chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: John Stultz <jstultz@google.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/r/20250702021440.2594736-1-kuyo.chang@mediatek.com
|
|
Commit <4f1492efb495> ("iommu/vt-d: Revert ATS timing change to fix boot
failure") placed the enabling of ATS in the probe_finalize callback. This
occurs after the default domain attachment, which is when the ATS cache
tag is assigned. Consequently, the device TLB cache tag is missed when the
domain is attached, leading to the device TLB not being invalidated in the
iommu_unmap paths.
Fix this by assigning the CACHE_TAG_DEVTLB cache tag when ATS is enabled.
Fixes: 4f1492efb495 ("iommu/vt-d: Revert ATS timing change to fix boot failure")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Tested-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250625050135.3129955-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20250628100351.3198955-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The cs40l50_upload_owt() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Fixes: c38fe1bb5d21 ("Input: cs40l50 - Add support for the CS40L50 haptic driver")
Link: https://lore.kernel.org/r/20250704024010.2353841-1-jiangyunshui@kylinos.cn
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There's one case where ->d_compare() can be called for an in-lookup
dentry; usually that's nothing special from ->d_compare() point of
view, but... proc_sys_compare() is weird.
The thing is, /proc/sys subdirectories can look differently for
different processes. Up to and including having the same name
resolve to different dentries - all of them hashed.
The way it's done is ->d_compare() refusing to admit a match unless
this dentry is supposed to be visible to this caller. The information
needed to discriminate between them is stored in inode; it is set
during proc_sys_lookup() and until it's done d_splice_alias() we really
can't tell who should that dentry be visible for.
Normally there's no negative dentries in /proc/sys; we can run into
a dying dentry in RCU dcache lookup, but those can be safely rejected.
However, ->d_compare() is also called for in-lookup dentries, before
they get positive - or hashed, for that matter. In case of match
we will wait until dentry leaves in-lookup state and repeat ->d_compare()
afterwards. In other words, the right behaviour is to treat the
name match as sufficient for in-lookup dentries; if dentry is not
for us, we'll see that when we recheck once proc_sys_lookup() is
done with it.
While we are at it, fix the misspelled READ_ONCE and WRITE_ONCE there.
Fixes: d9171b934526 ("parallel lookups machinery, part 4 (and last)")
Reported-by: NeilBrown <neilb@brown.name>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Fix chunking the PTE updates and overflowing the maximum number of
dwords with with MI_STORE_DATA_IMM (Jia Yao)
- Move WA BB to the LRC BO to mitigate hangs on context switch (Matthew
Brost)
- Fix frequency/flush WAs for BMG (Vinay / Lucas)
- Fix kconfig prompt title and description (Lucas)
- Do not require kunit (Harry Austen / Lucas)
- Extend 14018094691 WA to BMG (Daniele)
- Fix wedging the device on signal (Matthew Brost)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/o5662wz6nrlf6xt5sjgxq5oe6qoujefzywuwblm3m626hreifv@foqayqydd6ig
|
|
We've seen customers having shares mounted in paths like /??/C:/ or
/??/UNC/foo.example.com/share in order to get their native SMB
symlinks successfully followed from different mounts.
After commit 12b466eb52d9 ("cifs: Fix creating and resolving absolute NT-style symlinks"),
the client would then convert absolute paths from "/??/C:/" to "/mnt/c/"
by default. The absolute paths would vary depending on the value of
symlinkroot= mount option.
Fix this by restoring old behavior of not trying to convert absolute
paths by default. Only do this if symlinkroot= was _explicitly_ set.
Before patch:
$ mount.cifs //w22-fs0/test2 /mnt/1 -o vers=3.1.1,username=xxx,password=yyy
$ ls -l /mnt/1/symlink2
lrwxr-xr-x 1 root root 15 Jun 20 14:22 /mnt/1/symlink2 -> /mnt/c/testfile
$ mkdir -p /??/C:; echo foo > //??/C:/testfile
$ cat /mnt/1/symlink2
cat: /mnt/1/symlink2: No such file or directory
After patch:
$ mount.cifs //w22-fs0/test2 /mnt/1 -o vers=3.1.1,username=xxx,password=yyy
$ ls -l /mnt/1/symlink2
lrwxr-xr-x 1 root root 15 Jun 20 14:22 /mnt/1/symlink2 -> '/??/C:/testfile'
$ mkdir -p /??/C:; echo foo > //??/C:/testfile
$ cat /mnt/1/symlink2
foo
Cc: linux-cifs@vger.kernel.org
Reported-by: Pierguido Lambri <plambri@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: 12b466eb52d9 ("cifs: Fix creating and resolving absolute NT-style symlinks")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
timing
When the SMB server reboots and the client immediately accesses the mount
point, a race condition can occur that causes operations to fail with
"Host is down" error.
Reproduction steps:
# Mount SMB share
mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx
ls /mnt
# Reboot server
ssh root@192.168.245.109 reboot
ssh root@192.168.245.109 /path/to/cifs_server_setup.sh
ssh root@192.168.245.109 systemctl stop firewalld
# Immediate access fails
ls /mnt
ls: cannot access '/mnt': Host is down
# But works if there is a delay
The issue is caused by a race condition between negotiate and reconnect.
The 20-second negotiate timeout mechanism can interfere with the normal
recovery process when both are triggered simultaneously.
ls cifsd
---------------------------------------------------
cifs_getattr
cifs_revalidate_dentry
cifs_get_inode_info
cifs_get_fattr
smb2_query_path_info
smb2_compound_op
SMB2_open_init
smb2_reconnect
cifs_negotiate_protocol
smb2_negotiate
cifs_send_recv
smb_send_rqst
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
server_unresponsive
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->mid_state = MID_RETRY_NEEDED
cifs_wake_up_task
cifs_sync_mid_result
// case MID_RETRY_NEEDED
rc = -EAGAIN;
// In smb2_negotiate()
rc = -EHOSTDOWN;
The server_unresponsive() timeout triggers cifs_reconnect(), which aborts
ongoing mid requests and causes the ls command to receive -EAGAIN, leading
to -EHOSTDOWN.
Fix this by introducing a dedicated `neg_start` field to
precisely tracks when the negotiate process begins. The timeout check
now uses this accurate timestamp instead of `lstrp`, ensuring that:
1. Timeout is only triggered after negotiate has actually run for 20s
2. The mechanism doesn't interfere with concurrent recovery processes
3. Uninitialized timestamps (value 0) don't trigger false timeouts
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
- Fixed raw pointer leakage and unsafe behavior in printk()
. Switch from %pK to %p for pointer formatting, as %p is now safer
and prevents issues like raw pointer leakage and acquiring sleeping
locks in atomic contexts.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250629091742.29956-1-inki.dae@samsung.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fixups
- Fixed raw pointer leakage and unsafe behavior in printk()
. Switch from %pK to %p for pointer formatting, as %p is now safer
and prevents issues like raw pointer leakage and acquiring sleeping
locks in atomic contexts.
- Fixed kernel panic during boot
. A NULL pointer dereference issue occasionally occurred
when the vblank interrupt handler was called before
the DRM driver was fully initialized during boot.
So this patch fixes the issue by adding a check in the interrupt handler
to ensure the DRM driver is properly initialized.
- Fixed a lockup issue on Samsung Peach-Pit/Pi Chromebooks
. The issue occurred after commit c9b1150a68d9 changed
the call order of CRTC enable/disable and bridge pre_enable/post_disable
methods, causing fimd_dp_clock_enable() to be called
before the FIMD device was activated. To fix this,
runtime PM guards were added to fimd_dp_clock_enable()
to ensure proper operation even when CRTC is not enabled.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://lore.kernel.org/r/20250629083554.28628-1-inki.dae@samsung.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Make mei interrupt top half irq disabled to fix RT builds
- Fix timeline left held on VMA alloc error
- Fix NULL pointer deref in vlv_dphy_param_init()
- Fix selftest mock_request() to avoid NULL deref
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://lore.kernel.org/r/aGYVPAA4KvsZqDFx@jlahtine-mobl
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc5:
- Replace simple panel lookup hack with proper fix.
- nullpointer deref in vesadrm fix.
- fix dma_resv_wait_timeout.
- fix error handling in ttm_buffer_object_transfer.
- bridge fixes.
- Fix vmwgfx accidentally allocating encrypted memory.
- Fix race in spsc_queue_push()
- Add refcount on backing GEM objects during fb creation.
- Fix v3d irq's being enabled during gpu reset.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/a7461418-08dc-4b7c-b2fa-264155f66d5e@linux.intel.com
|
