| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix regression in pwm-stm32 driver when converting to new waveform
support
Fabrice Gasnier found and fixed a regression I introduced with
v6.13-rc1 when converting the stm32 pwm driver to support the new
waveform stuff. On some hardware variants this completely broke the
driver"
* tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: stm32: Fix complementary output in round_waveform_tohw()
|
|
Pull smb server fixes from Steve French:
- Two fixes for better handling maximum outstanding requests
- Fix simultaneous negotiate protocol race
* tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: conn lock to serialize smb2 negotiate
ksmbd: fix broken transfers when exceeding max simultaneous operations
ksmbd: count all requests in req_running counter
|
|
If a PCIe port only supports a single speed, enabling bandwidth control
is pointless: There's no need to monitor autonomous speed changes, nor
can the speed be changed.
Not enabling it saves a small amount of memory and compute resources,
but also fixes a boot hang reported by Niklas: It occurs when enabling
bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018"
Thunderbolt controllers. The ports only support 2.5 GT/s in accordance
with USB4 v2 sec 11.2.1, so the present commit works around the issue.
PCIe r6.2 sec 8.2.1 prescribes that:
"A device must support 2.5 GT/s and is not permitted to skip support
for any data rates between 2.5 GT/s and the highest supported rate."
Consequently, bandwidth control is currently only disabled if a port
doesn't support higher speeds than 2.5 GT/s. However the Implementation
Note in PCIe r6.2 sec 7.5.3.18 cautions:
"It is strongly encouraged that software primarily utilize the
Supported Link Speeds Vector instead of the Max Link Speed field,
so that software can determine the exact set of supported speeds on
current and future hardware. This can avoid software being confused
if a future specification defines Links that do not require support
for all slower speeds."
In other words, future revisions of the PCIe Base Spec may allow gaps
in the Supported Link Speeds Vector. To be future-proof, don't just
check whether speeds above 2.5 GT/s are supported, but rather check
whether *more than one* speed is supported.
Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@kernel.org
Link: https://lore.kernel.org/r/3564908a9c99fc0d2a292473af7a94ebfc8f5820.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The Supported Link Speeds Vector in the Link Capabilities 2 Register
indicates the *supported* link speeds. The Max Link Speed field in the
Link Capabilities Register indicates the *maximum* of those speeds.
pcie_get_supported_speeds() neglects to honor the Max Link Speed field and
will thus incorrectly deem higher speeds as supported. Fix it.
One user-visible issue addressed here is an incorrect value in the sysfs
attribute "max_link_speed".
But the main motivation is a boot hang reported by Niklas: Intel JHL7540
"Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds,
but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more
devices. It can be explained by the controller's Downstream Ports
supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s
if the port interfaces to a PCIe Adapter, in accordance with USB4 v2
sec 11.2.1:
"This section defines the functionality of an Internal PCIe Port that
interfaces to a PCIe Adapter. [...]
The Logical sub-block shall update the PCIe configuration registers
with the following characteristics: [...]
Max Link Speed field in the Link Capabilities Register set to 0001b
(data rate of 2.5 GT/s only).
Note: These settings do not represent actual throughput. Throughput
is implementation specific and based on the USB4 Fabric performance."
The present commit is not sufficient on its own to fix Niklas' boot hang,
but it is a prerequisite: A subsequent commit will fix the boot hang by
enabling bandwidth control only if more than one speed is supported.
The GENMASK() macro used herein specifies 0 as lowest bit, even though
the Supported Link Speeds Vector ends at bit 1. This is done on purpose
to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro
would be invalid as the lowest bit is greater than the highest bit.
Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated
Endpoints in particular, so it does occur in practice. (The Link
Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.)
Fixes: d2bd39c0456b ("PCI: Store all PCIe Supported Link Speeds")
Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org
Link: https://lore.kernel.org/r/fe03941e3e1cc42fb9bf4395e302bff53ee2198b.1734428762.git.lukas@wunner.de
Reported-by: Niklas Schnelle <niks@kernel.org>
Tested-by: Niklas Schnelle <niks@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
With DEFER_TASKRUN, we know the ring can't be both waited upon and
resized at the same time. This is important for CQ resizing. Allowing SQ
ring resizing is more trivial, but isn't the interesting use case. Hence
limit ring resizing in general to DEFER_TASKRUN only for now. This isn't
a huge problem as CQ ring resizing is generally the most useful on
networking type of workloads where it can be hard to size the ring
appropriately upfront, and those should be using DEFER_TASKRUN for
better performance.
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
!WQ_MEM_RECLAIM worker
After commit
746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")
amdgpu started seeing the following warning:
[ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu]
...
[ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched]
...
[ ] Call Trace:
[ ] <TASK>
...
[ ] ? check_flush_dependency+0xf5/0x110
...
[ ] cancel_delayed_work_sync+0x6e/0x80
[ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu]
[ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu]
[ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu]
[ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched]
[ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu]
[ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched]
[ ] process_one_work+0x217/0x720
...
[ ] </TASK>
The intent of the verifcation done in check_flush_depedency is to ensure
forward progress during memory reclaim, by flagging cases when either a
memory reclaim process, or a memory reclaim work item is flushed from a
context not marked as memory reclaim safe.
This is correct when flushing, but when called from the
cancel(_delayed)_work_sync() paths it is a false positive because work is
either already running, or will not be running at all. Therefore
cancelling it is safe and we can relax the warning criteria by letting the
helper know of the calling context.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: fca839c00a12 ("workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue")
References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM")
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Remove the redundant .hwapic_irr_update() ops.
If a vCPU has APICv enabled, KVM updates its RVI before VM-enter to L1
in vmx_sync_pir_to_irr(). This guarantees RVI is up-to-date and aligned
with the vIRR in the virtual APIC. So, no need to update RVI every time
the vIRR changes.
Note that KVM never updates vmcs02 RVI in .hwapic_irr_update() or
vmx_sync_pir_to_irr(). So, removing .hwapic_irr_update() has no
impact to the nested case.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241111085947.432645-1-chao.gao@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move the handling of a nested posted interrupt notification that is
unblocked by nested VM-Enter (unblocks L1 IRQs when ack-on-exit is enabled
by L1) from VM-Enter emulation to vmx_check_nested_events(). To avoid a
pointless forced immediate exit, i.e. to not regress IRQ delivery latency
when a nested posted interrupt is pending at VM-Enter, block processing of
the notification IRQ if and only if KVM must block _all_ events. Unlike
injected events, KVM doesn't need to actually enter L2 before updating the
vIRR and vmcs02.GUEST_INTR_STATUS, as the resulting L2 IRQ will be blocked
by hardware itself, until VM-Enter to L2 completes.
Note, very strictly speaking, moving the IRQ from L2's PIR to IRR before
entering L2 is still technically wrong. But, practically speaking, only
an L1 hypervisor or an L0 userspace that is deliberately checking event
priority against PIR=>IRR processing can even notice; L2 will see
architecturally correct behavior, as KVM ensures the VM-Enter is finished
before doing anything that would effectively preempt the PIR=>IRR movement.
Reported-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241101191447.1807602-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use vmcs01's execution controls shadow to check for IRQ/NMI windows after
a successful nested VM-Enter, instead of snapshotting the information prior
to emulating VM-Enter. It's quite difficult to see that the entire reason
controls are snapshot prior nested VM-Enter is to read them from vmcs01
(vmcs02 is loaded if nested VM-Enter is successful).
That could be solved with a comment, but explicitly using vmcs01's shadow
makes the code self-documenting to a certain extent.
No functional change intended (vmcs01's execution controls must not be
modified during emulation of nested VM-Enter).
Link: https://lore.kernel.org/r/20241101191447.1807602-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Drop the manual check for a pending IRQ in vmcs01's RVI field during
nested VM-Enter, as the recently added call to kvm_apic_has_interrupt()
when checking for pending events after successful VM-Enter is a superset
of the RVI check (IRQs that are pending in RVI are also pending in L1's
IRR).
Link: https://lore.kernel.org/r/20241101191447.1807602-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly check for a pending INIT or SIPI after entering non-root mode
during nested VM-Enter emulation, as no VMCS information is quered as part
of the check, i.e. there is no need to check for INIT/SIPI while vmcs01 is
still loaded.
Link: https://lore.kernel.org/r/20241101191447.1807602-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Always request pending event evaluation after successful nested VM-Enter
if L1 has a pending IRQ, as KVM will effectively do so anyways when APICv
is enabled, by way of vmx_has_apicv_interrupt(). This will allow dropping
the aforementioned APICv check, and will also allow handling nested Posted
Interrupt processing entirely within vmx_check_nested_events(), which is
necessary to honor priority between concurrent events.
Note, checking for pending IRQs has a subtle side effect, as it results in
a PPR update for L1's vAPIC (PPR virtualization does happen at VM-Enter,
but for nested VM-Enter that affects L2's vAPIC, not L1's vAPIC). However,
KVM updates PPR _constantly_, even when PPR technically shouldn't be
refreshed, e.g. kvm_vcpu_has_events() re-evaluates PPR if IRQs are
unblocked, by way of the same kvm_apic_has_interrupt() check. Ditto for
nested VM-Enter itself, when nested posted interrupts are enabled. Thus,
trying to avoid a PPR update on VM-Enter just to be pedantically accurate
is ridiculous, given the behavior elsewhere in KVM.
Link: https://lore.kernel.org/kvm/20230312180048.1778187-1-jason.cj.chen@intel.com
Closes: https://lore.kernel.org/all/20240920080012.74405-1-mankku@gmail.com
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241101191447.1807602-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allow toggling other bits in MSR_IA32_RTIT_CTL if the enable bit is being
cleared, the existing logic simply ignores the enable bit. E.g. KVM will
incorrectly reject a write of '0' to stop tracing.
Fixes: bf8c55d8dc09 ("KVM: x86: Implement Intel PT MSRs read/write emulation")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
[sean: rework changelog, drop stable@]
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241101185031.1799556-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
If KVM emulates an EOI for L1's virtual APIC while L2 is active, defer
updating GUEST_INTERUPT_STATUS.SVI, i.e. the VMCS's cache of the highest
in-service IRQ, until L1 is active, as vmcs01, not vmcs02, needs to track
vISR. The missed SVI update for vmcs01 can result in L1 interrupts being
incorrectly blocked, e.g. if there is a pending interrupt with lower
priority than the interrupt that was EOI'd.
This bug only affects use cases where L1's vAPIC is effectively passed
through to L2, e.g. in a pKVM scenario where L2 is L1's depriveleged host,
as KVM will only emulate an EOI for L1's vAPIC if Virtual Interrupt
Delivery (VID) is disabled in vmc12, and L1 isn't intercepting L2 accesses
to its (virtual) APIC page (or if x2APIC is enabled, the EOI MSR).
WARN() if KVM updates L1's ISR while L2 is active with VID enabled, as an
EOI from L2 is supposed to affect L2's vAPIC, but still defer the update,
to try to keep L1 alive. Specifically, KVM forwards all APICv-related
VM-Exits to L1 via nested_vmx_l1_wants_exit():
case EXIT_REASON_APIC_ACCESS:
case EXIT_REASON_APIC_WRITE:
case EXIT_REASON_EOI_INDUCED:
/*
* The controls for "virtualize APIC accesses," "APIC-
* register virtualization," and "virtual-interrupt
* delivery" only come from vmcs12.
*/
return true;
Fixes: c7c9c56ca26f ("x86, apicv: add virtual interrupt delivery support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/kvm/20230312180048.1778187-1-jason.cj.chen@intel.com
Reported-by: Markku Ahvenjärvi <mankku@gmail.com>
Closes: https://lore.kernel.org/all/20240920080012.74405-1-mankku@gmail.com
Cc: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
[sean: drop request, handle in VMX, write changelog]
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241128000010.4051275-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.")
fixed a netns UAF by manually enabled socket refcounting
(sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)).
The reason the patch worked for that bug was because we now hold
references to the netns (get_net_track() gets a ref internally)
and they're properly released (internally, on __sk_destruct()),
but only because sk->sk_net_refcnt was set.
Problem:
(this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless
if init_net or other)
Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not
only out of cifs scope, but also technically wrong -- it's set conditionally
based on user (=1) vs kernel (=0) sockets. And net/ implementations
seem to base their user vs kernel space operations on it.
e.g. upon TCP socket close, the TCP timers are not cleared because
sk->sk_net_refcnt=1:
(cf. commit 151c9c724d05 ("tcp: properly terminate timers for kernel sockets"))
net/ipv4/tcp.c:
void tcp_close(struct sock *sk, long timeout)
{
lock_sock(sk);
__tcp_close(sk, timeout);
release_sock(sk);
if (!sk->sk_net_refcnt)
inet_csk_clear_xmit_timers_sync(sk);
sock_put(sk);
}
Which will throw a lockdep warning and then, as expected, deadlock on
tcp_write_timer().
A way to reproduce this is by running the reproducer from ef7134c7fc48
and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep
warning shows up.
Fix:
We shouldn't mess with socket internals ourselves, so do not set
sk_net_refcnt manually.
Also change __sock_create() to sock_create_kern() for explicitness.
As for non-init_net network namespaces, we deal with it the best way
we can -- hold an extra netns reference for server->ssocket and drop it
when it's released. This ensures that the netns still exists whenever
we need to create/destroy server->ssocket, but is not directly tied to
it.
Fixes: ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.")
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Repeating automatically selected options in Kconfig files is redundant, so
let's delete repeated "select NETFS_SUPPORT" that was added accidentally.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
value
Replace default hardcoded value for cifsAttrs with ATTR_ARCHIVE macro
Use SMB2_LEASE_KEY_SIZE macro for leasekey size in smb2_lease_break
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Commit baf4afc5831438 ("drm/sched: Improve teardown documentation")
added a list of drm_sched_fini()'s problems. The list triggers htmldocs
warning (but renders correctly in htmldocs output):
Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation.
Separate the list from the preceding paragraph by a blank line to fix
the warning. While at it, also end the aforementioned paragraph by a
colon.
Fixes: baf4afc58314 ("drm/sched: Improve teardown documentation")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
[phasta: Adjust commit message]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
|
|
The genpd device, which is really only used as a handle to lookup
OPP, but not even registered to the device core otherwise and thus
lifetime linked to the genpd struct it is contained in, is missing
a release function. After b8f7bbd1f4ec ("pmdomain: core: Add
missing put_device()") the device will be cleaned up going through
the driver core device_release() function, which will warn when no
release callback is present for the device. Add a dummy release
function to shut up the warning.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: b8f7bbd1f4ec ("pmdomain: core: Add missing put_device()")
Cc: stable@vger.kernel.org
Message-ID: <20241218184433.1930532-1-l.stach@pengutronix.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
imx_gpcv2_probe() leaks an OF node reference obtained by
of_get_child_by_name(). Fix it by declaring the device node with the
__free(device_node) cleanup construct.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Message-ID: <20241215030159.1526624-1-joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Encoding file handles is usually performed by a filesystem >encode_fh()
method that may fail for various reasons.
The legacy users of exportfs_encode_fh(), namely, nfsd and
name_to_handle_at(2) syscall are ready to cope with the possibility
of failure to encode a file handle.
There are a few other users of exportfs_encode_{fh,fid}() that
currently have a WARN_ON() assertion when ->encode_fh() fails.
Relax those assertions because they are wrong.
The second linked bug report states commit 16aac5ad1fa9 ("ovl: support
encoding non-decodable file handles") in v6.6 as the regressing commit,
but this is not accurate.
The aforementioned commit only increases the chances of the assertion
and allows triggering the assertion with the reproducer using overlayfs,
inotify and drop_caches.
Triggering this assertion was always possible with other filesystems and
other reasons of ->encode_fh() failures and more particularly, it was
also possible with the exact same reproducer using overlayfs that is
mounted with options index=on,nfs_export=on also on kernels < v6.6.
Therefore, I am not listing the aforementioned commit as a Fixes commit.
Backport hint: this patch will have a trivial conflict applying to
v6.6.y, and other trivial conflicts applying to stable kernels < v6.6.
Reported-by: syzbot+ec07f6f5ce62b858579f@syzkaller.appspotmail.com
Tested-by: syzbot+ec07f6f5ce62b858579f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-unionfs/671fd40c.050a0220.4735a.024f.GAE@google.com/
Reported-by: Dmitry Safonov <dima@arista.com>
Closes: https://lore.kernel.org/linux-fsdevel/CAGrbwDTLt6drB9eaUagnQVgdPBmhLfqqxAf3F+Juqy_o6oP8uw@mail.gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20241219115301.465396-1-amir73il@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit c7eed31e235c ("mmc: sdhci-msm: Switch to the new ICE API")
introduced an incorrect check of the algorithm ID into the key eviction
path, and thus qcom_ice_evict_key() is no longer ever called. Fix it.
Fixes: c7eed31e235c ("mmc: sdhci-msm: Switch to the new ICE API")
Cc: stable@vger.kernel.org
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Message-ID: <20241213041958.202565-6-ebiggers@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
into HEAD
KVM selftests "tree"-wide changes for 6.14:
- Rework vcpu_get_reg() to return a value instead of using an out-param, and
update all affected arch code accordingly.
- Convert the max_guest_memory_test into a more generic mmu_stress_test.
The basic gist of the "conversion" is to have the test do mprotect() on
guest memory while vCPUs are accessing said memory, e.g. to verify KVM
and mmu_notifiers are working as intended.
- Play nice with treewrite builds of unsupported architectures, e.g. arm
(32-bit), as KVM selftests' Makefile doesn't do anything to ensure the
target architecture is actually one KVM selftests supports.
- Use the kernel's $(ARCH) definition instead of the target triple for arch
specific directories, e.g. arm64 instead of aarch64, mainly so as not to
be different from the rest of the kernel.
|
|
In get_uprobe_offset(), the call to procmap_query() use the constant
PROCMAP_QUERY_VMA_EXECUTABLE, even if PROCMAP_QUERY is not defined.
Define PROCMAP_QUERY_VMA_EXECUTABLE when PROCMAP_QUERY isn't.
Fixes: 4e9e07603ecd ("selftests/bpf: make use of PROCMAP_QUERY ioctl if available")
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20241218175724.578884-1-jmarchan@redhat.com
|
|
Move pm_runtime_set_active() to ivpu_pm_init() so when
ivpu_ipc_send_receive_internal() is executed before ivpu_pm_enable()
it already has correct runtime state, even if last resume was
not successful.
Fixes: 8ed520ff4682 ("accel/ivpu: Move set autosuspend delay to HW specific code")
Cc: stable@vger.kernel.org # v6.7+
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-4-jacek.lawrynowicz@linux.intel.com
|
|
Add appropriate error handling to ensure all allocated resources are
released upon encountering an error.
Fixes: a74f4d991352 ("accel/ivpu: Defer MMU root page table allocation")
Cc: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-3-jacek.lawrynowicz@linux.intel.com
|
|
Check if ctx is not NULL before accessing its fields.
Fixes: 37dee2a2f433 ("accel/ivpu: Improve buffer object debug logs")
Cc: stable@vger.kernel.org # v6.8
Reviewed-by: Karol Wachowski <karol.wachowski@intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241210130939.1575610-2-jacek.lawrynowicz@linux.intel.com
|
|
Currently, LoongArch LLVM does not support the constraint "o" and no plan
to support it, it only supports the similar constraint "m", so change the
constraints from "nor" in the "else" case to arch-specific "nmr" to avoid
the build error such as "unexpected asm memory constraint" for LoongArch.
Fixes: 630301b0d59d ("selftests/bpf: Add basic USDT selftests")
Suggested-by: Weining Lu <luweining@loongson.cn>
Suggested-by: Li Chen <chenli@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: stable@vger.kernel.org
Link: https://llvm.org/docs/LangRef.html#supported-constraint-code-list
Link: https://github.com/llvm/llvm-project/blob/main/llvm/lib/Target/LoongArch/LoongArchISelDAGToDAG.cpp#L172
Link: https://lore.kernel.org/bpf/20241219111506.20643-1-yangtiezhu@loongson.cn
|
|
QP table handling is synchronized with destroy QP and Async
event from the HW. The same needs to be synchronized
during create_qp also. Use the same lock in create_qp also.
Fixes: 76d3ddff7153 ("RDMA/bnxt_re: synchronize the qp-handle table array")
Fixes: f218d67ef004 ("RDMA/bnxt_re: Allow posting when QPs are in error")
Fixes: 84cf229f4001 ("RDMA/bnxt_re: Fix the qp table indexing")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-6-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For variable size wqe mode, the MSN table size should be
half the size of the SQ depth. Fixing this to avoid wrap
around problems in the retransmission path.
Fixes: de1d364c3815 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-5-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
For the fixed WQE case, HW supports 0xFFFF WQEs.
For variable Size WQEs, HW treats this number as
the 16 bytes slots. The maximum supported WQEs
needs to be adjusted based on the number of slots.
Set a maximum WQE limit for variable WQE scenario.
Fixes: de1d364c3815 ("RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-4-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Disabling the reserved wqes logic for Gen P5/P7 devices
because this workaround is required only for legacy devices.
Fixes: ecb53febfcad ("RDMA/bnxt_en: Enable RDMA driver support for 57500 chip")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-3-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
While creating qps, driver adds one extra entry to the sq size
passed by the ULPs in order to avoid queue full condition.
When ULPs creates QPs with max_qp_wr reported, driver creates
QP with 1 more than the max_wqes supported by HW. Create QP fails
in this case. To avoid this error, reduce 1 entry in max_qp_wqes
and report it to the stack.
Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://patch.msgid.link/20241217102649.1377704-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v6.13-rc4
This includes following USB4/Thunderbolt fixes for v6.13-rc4:
- Add Intel Panther Lake PCI IDs
- Do not show nvm_version for retimers that are not supported
- Fix redrive mode handling.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.13-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Improve redrive mode handling
thunderbolt: Don't display nvm_version unless upgrade supported
thunderbolt: Add support for Intel Panther Lake-M/P
|
|
The regulator bindings don't document regulator-uv-survival-time-ms, but
the more descriptive regulator-uv-less-critical-window-ms instead.
Looking back at v3[1] and v4[2] of the series adding the support,
the property was indeed renamed between these patch series, but
unfortunately the rename only made it into the DT bindings with the
driver code still using the old name.
Let's therefore rename the property in the driver code to follow suit.
This will break backwards compatibility, but there are no upstream
device trees using the property and we never documented the old name
of the property anyway. ¯\_(ツ)_/¯"
[1]: https://lore.kernel.org/all/20231025084614.3092295-7-o.rempel@pengutronix.de/
[2]: https://lore.kernel.org/all/20231026144824.4065145-5-o.rempel@pengutronix.de/
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://patch.msgid.link/20241218-regulator-uv-survival-time-ms-rename-v1-1-6cac9c3c75da@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Chromebooks based on Mediatek MT8195 or MT8188, the audio frontend
(AFE) is limited to accessing a very small window (1 MiB) of memory,
which is described as a reserved memory region in the device tree.
On these two platforms, the maximum buffer size is given as 512 KiB.
The MediaTek common code uses the same value for preallocations. This
means that only the first two PCM substreams get preallocations, and
then the whole space is exhausted, barring any other substreams from
working. Since the substreams used are not always the first two, this
means audio won't work correctly.
This is observed on the MT8188 Geralt Chromebooks, on which the
"mediatek,dai-link" property was dropped when it was upstreamed. That
property causes the driver to only register the PCM substreams listed
in the property, and in the order given.
Instead of trying to compute an optimal value and figuring out which
streams are used, simply disable preallocation. The PCM buffers are
managed by the core and are allocated and released on the fly. There
should be no impact to any of the other MediaTek platforms.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20241219105303.548437-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently, we don't use the return value from sock_queue_rcv_skb, which
means we may leak skbs if a message is not successfully queued to a
socket.
Instead, ensure that we're freeing the skb where the sock hasn't
otherwise taken ownership of the skb by adding checks on the
sock_queue_rcv_skb() to invoke a kfree on failure.
In doing so, rather than using the 'rc' value to trigger the
kfree_skb(), use the skb pointer itself, which is more explicit.
Also, add a kunit test for the sock delivery failure cases.
Fixes: 4a992bbd3650 ("mctp: Implement message fragmentation & reassembly")
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20241218-mctp-next-v2-1-1c1729645eaa@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fwnode_find_mii_timestamper() calls of_parse_phandle_with_fixed_args()
but does not decrement the refcount of the obtained OF node. Add an
of_node_put() call before returning from the function.
This bug was detected by an experimental static analysis tool that I am
developing.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241218035106.1436405-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Reset engine utilization buffer before registration (Umesh Nerlige Ramappa)
- Ensure busyness counter increases motonically (Umesh Nerlige Ramappa)
- Accumulate active runtime on gt reset (Umesh Nerlige Ramappa)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z2LppUZudGKXwWjW@linux
|
|
Do not manage a per device direct link to net_device. Rely
on associated ib_devices net_device management, not doubling
the effort locally. A badly managed local link to net_device
was causing a 'KASAN: slab-use-after-free' exception during
siw_query_port() call.
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Reported-by: syzbot+4b87489410b4efd181bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4b87489410b4efd181bf
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://patch.msgid.link/20241212151848.564872-1-bmt@zurich.ibm.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
In case of error set the error code before the goto.
Fixes: 6ff57a2ea7c2 ("RDMA/nldev: Fix NULL pointer dereferences issue in rdma_nl_notify_event")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-rdma/a84a2fc3-33b6-46da-a1bd-3343fa07eaf9@stanley.mountain/
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/13eb25961923f5de9eb9ecbbc94e26113d6049ef.1733815944.git.leonro@nvidia.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following series contains two fixes for Netfilter/IPVS:
1) Possible build failure in IPVS on systems with less than 512MB
memory due to incorrect use of clamp(), from David Laight.
2) Fix bogus lockdep nesting splat with ipset list:set type,
from Phil Sutter.
netfilter pull request 24-12-19
* tag 'nf-24-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: Fix for recursive locking warning
ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems
====================
Link: https://patch.msgid.link/20241218234137.1687288-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Unregister the devlink port when register_netdev() fails.
Fixes: 9ed0343f561e ("octeontx2-pf: Add devlink port support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241217052326.1086191-2-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When rvu_rep_devlink_port_register() fails, free_netdev(ndev) for this
incomplete iteration before going to "exit:" label.
Fixes: 9ed0343f561e ("octeontx2-pf: Add devlink port support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20241217052326.1086191-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If PSAMPLE_ATTR_SAMPLE_PROBABILITY flag is to be sent, the available
size for the packet data has to be adjusted accordingly.
Also, check the error code returned by nla_put_flag.
Fixes: 7b1b2b60c63f ("net: psample: allow using rate as probability")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241217113739.3929300-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Empty netlink responses from do() are not correct (as opposed to
dump() where not dumping anything is perfectly fine).
We should return an error if the target object does not exist,
in this case if the netdev is down it has no queues.
Fixes: 6b6171db7fc8 ("netdev-genl: Add netlink framework functions for queue")
Reported-by: syzbot+0a884bc2d304ce4af70f@syzkaller.appspotmail.com
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241218022508.815344-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
VLAN-untagged traffic
Robert Hodaszi reports that locally terminated traffic towards
VLAN-unaware bridge ports is broken with ocelot-8021q. He is describing
the same symptoms as for commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges").
For context, the set merged as "VLAN fixes for Ocelot driver":
https://lore.kernel.org/netdev/20240815000707.2006121-1-vladimir.oltean@nxp.com/
was developed in a slightly different form earlier this year, in January.
Initially, the switch was unconditionally configured to set OCELOT_ES0_TAG
when using ocelot-8021q, regardless of port operating mode.
This led to the situation where VLAN-unaware bridge ports would always
push their PVID - see ocelot_vlan_unaware_pvid() - a negligible value
anyway - into RX packets. To strip this in software, we would have needed
DSA to know what private VID the switch chose for VLAN-unaware bridge
ports, and pushed into the packets. This was implemented downstream, and
a remnant of it remains in the form of a comment mentioning
ds->ops->get_private_vid(), as something which would maybe need to be
considered in the future.
However, for upstream, it was deemed inappropriate, because it would
mean introducing yet another behavior for stripping VLAN tags from
VLAN-unaware bridge ports, when one already existed (ds->untag_bridge_pvid).
The latter has been marked as obsolete along with an explanation why it
is logically broken, but still, it would have been confusing.
So, for upstream, felix_update_tag_8021q_rx_rule() was developed, which
essentially changed the state of affairs from "Felix with ocelot-8021q
delivers all packets as VLAN-tagged towards the CPU" into "Felix with
ocelot-8021q delivers all packets from VLAN-aware bridge ports towards
the CPU". This was done on the premise that in VLAN-unaware mode,
there's nothing useful in the VLAN tags, and we can avoid introducing
ds->ops->get_private_vid() in the DSA receive path if we configure the
switch to not push those VLAN tags into packets in the first place.
Unfortunately, and this is when the trainwreck started, the selftests
developed initially and posted with the series were not re-ran.
dsa_software_vlan_untag() was initially written given the assumption
that users of this feature would send _all_ traffic as VLAN-tagged.
It was only partially adapted to the new scheme, by removing
ds->ops->get_private_vid(), which also used to be necessary in
standalone ports mode.
Where the trainwreck became even worse is that I had a second opportunity
to think about this, when the dsa_software_vlan_untag() logic change
initially broke sja1105, in commit 1f9fc48fd302 ("net: dsa: sja1105: fix
reception from VLAN-unaware bridges"). I did not connect the dots that
it also breaks ocelot-8021q, for pretty much the same reason that not
all received packets will be VLAN-tagged.
To be compatible with the optimized Felix control path which runs
felix_update_tag_8021q_rx_rule() to only push VLAN tags when useful (in
VLAN-aware mode), we need to restore the old dsa_software_vlan_untag()
logic. The blamed commit introduced the assumption that
dsa_software_vlan_untag() will see only VLAN-tagged packets, assumption
which is false. What corrupts RX traffic is the fact that we call
skb_vlan_untag() on packets which are not VLAN-tagged in the first
place.
Fixes: 93e4649efa96 ("net: dsa: provide a software untagging function on RX for VLAN-aware bridges")
Reported-by: Robert Hodaszi <robert.hodaszi@digi.com>
Closes: https://lore.kernel.org/netdev/20241215163334.615427-1-robert.hodaszi@digi.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241216135059.1258266-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
idpf: trigger SW interrupt when exiting wb_on_itr mode
Joshua Hay says:
This patch series introduces SW triggered interrupt support for idpf,
then uses said interrupt to fix a race condition between completion
writebacks and re-enabling interrupts.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: trigger SW interrupt when exiting wb_on_itr mode
idpf: add support for SW triggered interrupts
====================
Link: https://patch.msgid.link/20241217225715.4005644-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the way tcpdump is executed by:
- Using the right variable for the namespace. Currently the use of the
empty "ns" makes the command fail.
- Waiting until it starts to capture to ensure the interesting traffic
is caught on slow systems.
- Using line-buffered output to ensure logs are available when the test
is paused with "-p". Otherwise the last chunk of data might only be
written when tcpdump is killed.
Fixes: 74cc26f416b9 ("selftests: openvswitch: add interface support")
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20241217211652.483016-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
split_huge_pages_write() does not handle the case where strsep finds no
delimiter in the given string and sets the input buffer to NULL, which
allows this reproducer to trigger a protection fault.
Link: https://lkml.kernel.org/r/20241216042752.257090-2-leocstone@gmail.com
Signed-off-by: Leo Stone <leocstone@gmail.com>
Reported-by: syzbot+8a3da2f1bbf59227c289@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8a3da2f1bbf59227c289
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
