| Age | Commit message (Collapse) | Author |
|---|
|
Change system_call_exception arguments to pass a pointer to a stack
frame container caller state, as well as the original r0, which
determines the number of the syscall. This has been observed to yield
improved performance to passing them by registers, circumventing the
need to allocate a stack frame.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Retain clearing of high bits of args for compat tasks]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-21-rmclure@linux.ibm.com
|
|
Cause syscall handlers to be typed as follows when called indirectly
throughout the kernel. This is to allow for better type checking.
typedef long (*syscall_fn)(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
Since both 32 and 64-bit abis allow for at least the first six
machine-word length parameters to a function to be passed by registers,
even handlers which admit fewer than six parameters may be viewed as
having the above type.
Coercing syscalls to syscall_fn requires a cast to void* to avoid
-Wcast-function-type.
Fixup comparisons in VDSO to avoid pointer-integer comparison. Introduce
explicit cast on systems with SPUs.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-19-rmclure@linux.ibm.com
|
|
The table of syscall handlers and registered compatibility syscall
handlers has in past been produced using assembly, with function
references resolved at link time. This moves link-time errors to
compile-time, by rewriting systbl.S in C, and including the
linux/syscalls.h, linux/compat.h and asm/syscalls.h headers for
prototypes.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-18-rmclure@linux.ibm.com
|
|
Forward declare all syscall handler prototypes where a generic prototype
is not provided in either linux/syscalls.h or linux/compat.h in
asm/syscalls.h. This is required for compile-time type-checking for
syscall handlers, which is implemented later in this series.
32-bit compatibility syscall handlers are expressed in terms of types in
ppc32.h. Expose this header globally.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Use standard include guard naming for syscalls_32.h]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-17-rmclure@linux.ibm.com
|
|
Arch-specific implementations of syscall handlers are currently used
over generic implementations for the following reasons:
1. Semantics unique to powerpc
2. Compatibility syscalls require 'argument padding' to comply with
64-bit argument convention in ELF32 abi.
3. Parameter types or order is different in other architectures.
These syscall handlers have been defined prior to this patch series
without invoking the SYSCALL_DEFINE or COMPAT_SYSCALL_DEFINE macros with
custom input and output types. We remove every such direct definition in
favour of the aforementioned macros.
Also update syscalls.tbl in order to refer to the symbol names generated
by each of these macros. Since ppc64_personality can be called by both
64 bit and 32 bit binaries through compatibility, we must generate both
both compat_sys_ and sys_ symbols for this handler.
As an aside:
A number of architectures including arm and powerpc agree on an
alternative argument order and numbering for most of these arch-specific
handlers. A future patch series may allow for asm/unistd.h to signal
through its defines that a generic implementation of these syscall
handlers with the correct calling convention be emitted, through the
__ARCH_WANT_COMPAT_SYS_... convention.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-16-rmclure@linux.ibm.com
|
|
Avoid duplication in future patch that will define the ppc64_personality
syscall handler in terms of the SYSCALL_DEFINE and COMPAT_SYSCALL_DEFINE
macros, by extracting the common body of ppc64_personality into a helper
function.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-15-rmclure@linux.ibm.com
|
|
Syscall handlers should not be invoked internally by their symbol names,
as these symbols defined by the architecture-defined SYSCALL_DEFINE
macro. Move the compatibility syscall definition for mmap2 to
syscalls.c, so that all mmap implementations can share a helper function.
Remove 'inline' on static mmap helper.
Signed-off-by: Rohan McLure <rmclure@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fix compat_sys_mmap2() prototype and offset handling]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220921065605.1051927-14-rmclure@linux.ibm.com
|
|
This field was added in commit 44510d6fa0c0 ("s390/pci: Handling
multifunctions") but is an unused remnant of an earlier version where
the devices on the virtual bus were connected in a linked list instead
of a fixed 256 entry array of pointers.
It is also not used for the list of busses as that is threaded through
struct zpci_bus not through struct zpci_dev.
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
ccw_device_force_console() has been removed by
commit 8cc0dcfdc1c0 ("s390/cio: remove pm support from
ccw bus driver"), so remove the declaration, too.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Replace DRM_DEBUG_KMS() with drm_dbg_kms() which allows specifying
the DRM device to provide more context.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905103559.118561-1-contact@emersion.fr
|
|
Edward Cree says:
====================
sfc: bare bones TC offload
This series begins the work of supporting TC flower offload on EF100 NICs.
This is the absolute minimum viable TC implementation to get traffic to
VFs and allow them to be tested; it supports no match fields besides
ingress port, no actions besides mirred and drop, and no stats.
More matches, actions, and counters will be added in subsequent patches.
Changed in v2:
- Add missing 'static' on declarations (kernel test robot, sparse)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is the absolute minimum viable TC implementation to get traffic to
VFs and allow them to be tested; it supports no match fields besides
ingress port, no actions besides mirred and drop, and no stats.
Example usage:
tc filter add dev $PF parent ffff: flower skip_sw \
action mirred egress mirror dev $VFREP
tc filter add dev $VFREP parent ffff: flower skip_sw \
action mirred egress redirect dev $PF
gives a VF unfiltered access to the network out the physical port ($PF
acts here as a physical port representor).
More matches, actions, and counters will be added in subsequent patches.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Different versions of EF100 firmware and FPGA bitstreams support different
matching capabilities in the Match-Action Engine. Probe for these at
start of day; subsequent patches will validate TC offload requests
against the reported capabilities.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nothing inserts into this table yet, but we have code to remove rules
on FLOW_CLS_DESTROY or at driver teardown time, in both cases also
attempting to remove the corresponding hardware rules.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TC offload support will involve complex limitations on what matches and
actions a rule can do, in some cases potentially depending on rules
already offloaded. So add an ethtool private flag "log-tc-errors" which
controls reporting the reasons for un-offloadable TC rules at NETIF_INFO.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bind indirect blocks for recognised tunnel netdevices.
Currently these connect to a stub efx_tc_flower() that only returns
-EOPNOTSUPP; subsequent patches will implement flower offloads to the
Match-Action Engine.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bind direct blocks for the MAE-admin PF and each VF representor.
Currently these connect to a stub efx_tc_flower() that only returns
-EOPNOTSUPP; subsequent patches will implement flower offloads to the
Match-Action Engine.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for flexible-array members in unions.
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/221
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both is_bpf and is_ebpf are boolean types, so
(!is_bpf && !is_ebpf) || (is_bpf && is_ebpf) can be reduced to
is_bpf == is_ebpf in tcf_bpf_init().
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Horatiu Vultur says:
====================
net: lan966x: Add tbf, cbs, ets support
Add support for offloading QoS features with tc command to lan966x.
The offloaded Qos features are tbf, cbs and ets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ets qdisc which allows to mix strict priority with bandwidth-sharing
bands. The ets qdisc needs to be attached as root qdisc.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lan966x switch supports credit based shaper in hardware according to
IEEE Std 802.1Q-2018 Section 8.6.8.2. Add support for cbs configuration
on egress port of lan966x switch.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tbf qdisc allows to attach a shaper on traffic egress on a port or
on a queue. On port they are attached directly to the root and on queue
they are attached on one of the classes of the parent qdisc.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As Jacob noticed, the optimization introduced in 387da6bc7a82 ("can:
c_can: cache frames to operate as a true FIFO") doesn't properly work
on C_CAN, but on D_CAN IP cores. The exact reasons are still unknown.
For now disable caching if CAN frames in the TX path for C_CAN cores.
Fixes: 387da6bc7a82 ("can: c_can: cache frames to operate as a true FIFO")
Link: https://lore.kernel.org/all/20220928083354.1062321-1-mkl@pengutronix.de
Link: https://lore.kernel.org/all/15a8084b-9617-2da1-6704-d7e39d60643b@gmail.com
Reported-by: Jacob Kroon <jacob.kroon@gmail.com>
Tested-by: Jacob Kroon <jacob.kroon@gmail.com>
Cc: stable@vger.kernel.org # v5.15
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Merge the mmc fixes for v6.0rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.1.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Centralize CMD and DATA reset handling so that is more obvious how reset
is handled in different situations.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220926192022.85660-5-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS is used by only ENE controllers but can
be replaced by driver code.
Amend the ENE code to hook the ->set_ios() mmc host operation and do the
reset there.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220926192022.85660-4-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
In SDHCI specification section 3.10.1 Error Interrupt Recovery, the flow
chart shows Software Reset for CMD separately and before Software Reset for
DAT, so the comment "Spec says we should do both at the same time" is not
correct. Remove it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220926192022.85660-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Tidy sdhci_do_reset() slightly by separating out sdhci_reset_for_all()
which removes the need to test the mask in sdhci_do_reset().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220926192022.85660-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Zhengchao Shao says:
====================
net: add tc-testing qdisc test cases
For this patchset, test cases of the qdisc modules are added to the
tc-testing test suite.
Last, thanks to Victor for testing and suggestion.
After a test case is added locally, the test result is as follows:
./tdc.py -c atm
ok 1 7628 - Create ATM with default setting
ok 2 390a - Delete ATM with valid handle
ok 3 32a0 - Show ATM class
ok 4 6310 - Dump ATM stats
./tdc.py -c choke
ok 1 8937 - Create CHOKE with default setting
ok 2 48c0 - Create CHOKE with min packet setting
ok 3 38c1 - Create CHOKE with max packet setting
ok 4 234a - Create CHOKE with ecn setting
ok 5 4380 - Create CHOKE with burst setting
ok 6 48c7 - Delete CHOKE with valid handle
ok 7 4398 - Replace CHOKE with min setting
ok 8 0301 - Change CHOKE with limit setting
./tdc.py -c codel
ok 1 983a - Create CODEL with default setting
ok 2 38aa - Create CODEL with limit packet setting
ok 3 9178 - Create CODEL with target setting
ok 4 78d1 - Create CODEL with interval setting
ok 5 238a - Create CODEL with ecn setting
ok 6 939c - Create CODEL with ce_threshold setting
ok 7 8380 - Delete CODEL with valid handle
ok 8 289c - Replace CODEL with limit setting
ok 9 0648 - Change CODEL with limit setting
./tdc.py -c etf
ok 1 34ba - Create ETF with default setting
ok 2 438f - Create ETF with delta nanos setting
ok 3 9041 - Create ETF with deadline_mode setting
ok 4 9a0c - Create ETF with skip_sock_check setting
ok 5 2093 - Delete ETF with valid handle
./tdc.py -c fq
ok 1 983b - Create FQ with default setting
ok 2 38a1 - Create FQ with limit packet setting
ok 3 0a18 - Create FQ with flow_limit setting
ok 4 2390 - Create FQ with quantum setting
ok 5 845b - Create FQ with initial_quantum setting
ok 6 9398 - Create FQ with maxrate setting
ok 7 342c - Create FQ with nopacing setting
ok 8 6391 - Create FQ with refill_delay setting
ok 9 238b - Create FQ with low_rate_threshold setting
ok 10 7582 - Create FQ with orphan_mask setting
ok 11 4894 - Create FQ with timer_slack setting
ok 12 324c - Create FQ with ce_threshold setting
ok 13 424a - Create FQ with horizon time setting
ok 14 89e1 - Create FQ with horizon_cap setting
ok 15 32e1 - Delete FQ with valid handle
ok 16 49b0 - Replace FQ with limit setting
ok 17 9478 - Change FQ with limit setting
./tdc.py -c gred
ok 1 8942 - Create GRED with default setting
ok 2 5783 - Create GRED with grio setting
ok 3 8a09 - Create GRED with limit setting
ok 4 48cb - Create GRED with ecn setting
ok 5 763a - Change GRED setting
ok 6 8309 - Show GRED class
./tdc.py -c hhf
ok 1 4812 - Create HHF with default setting
ok 2 8a92 - Create HHF with limit setting
ok 3 3491 - Create HHF with quantum setting
ok 4 ba04 - Create HHF with reset_timeout setting
ok 5 4238 - Create HHF with admit_bytes setting
ok 6 839f - Create HHF with evict_timeout setting
ok 7 a044 - Create HHF with non_hh_weight setting
ok 8 32f9 - Change HHF with limit setting
ok 9 385e - Show HHF class
./tdc.py -c pfifo_fast
ok 1 900c - Create pfifo_fast with default setting
ok 2 7470 - Dump pfifo_fast stats
ok 3 b974 - Replace pfifo_fast with different handle
ok 4 3240 - Delete pfifo_fast with valid handle
ok 5 4385 - Delete pfifo_fast with invalid handle
./tdc.py -c plug
ok 1 3289 - Create PLUG with default setting
ok 2 0917 - Create PLUG with block setting
ok 3 483b - Create PLUG with release setting
ok 4 4995 - Create PLUG with release_indefinite setting
ok 5 389c - Create PLUG with limit setting
ok 6 384a - Delete PLUG with valid handle
ok 7 439a - Replace PLUG with limit setting
ok 8 9831 - Change PLUG with limit setting
./tdc.py -c sfb
ok 1 3294 - Create SFB with default setting
ok 2 430a - Create SFB with rehash setting
ok 3 3410 - Create SFB with db setting
ok 4 49a0 - Create SFB with limit setting
ok 5 1241 - Create SFB with max setting
ok 6 3249 - Create SFB with target setting
ok 7 30a9 - Create SFB with increment setting
ok 8 239a - Create SFB with decrement setting
ok 9 9301 - Create SFB with penalty_rate setting
ok 10 2a01 - Create SFB with penalty_burst setting
ok 11 3209 - Change SFB with rehash setting
ok 12 5447 - Show SFB class
./tdc.py -c sfq
ok 1 7482 - Create SFQ with default setting
ok 2 c186 - Create SFQ with limit setting
ok 3 ae23 - Create SFQ with perturb setting
ok 4 a430 - Create SFQ with quantum setting
ok 5 4539 - Create SFQ with divisor setting
ok 6 b089 - Create SFQ with flows setting
ok 7 99a0 - Create SFQ with depth setting
ok 8 7389 - Create SFQ with headdrop setting
ok 9 6472 - Create SFQ with redflowlimit setting
ok 10 8929 - Show SFQ class
./tdc.py -c skbprio
ok 1 283e - Create skbprio with default setting
ok 2 c086 - Create skbprio with limit setting
ok 3 6733 - Change skbprio with limit setting
ok 4 2958 - Show skbprio class
./tdc.py -c taprio
ok 1 ba39 - Add taprio Qdisc to multi-queue device (8 queues)
ok 2 9462 - Add taprio Qdisc with multiple sched-entry
ok 3 8d92 - Add taprio Qdisc with txtime-delay
ok 4 d092 - Delete taprio Qdisc with valid handle
ok 5 8471 - Show taprio class
ok 6 0a85 - Add taprio Qdisc to single-queue device
./tdc.py -c tbf
ok 1 6430 - Create TBF with default setting
ok 2 0518 - Create TBF with mtu setting
ok 3 320a - Create TBF with peakrate setting
ok 4 239b - Create TBF with latency setting
ok 5 c975 - Create TBF with overhead setting
ok 6 948c - Create TBF with linklayer setting
ok 7 3549 - Replace TBF with mtu
ok 8 f948 - Change TBF with latency time
ok 9 2348 - Show TBF class
./tdc.py -c teql
ok 1 84a0 - Create TEQL with default setting
ok 2 7734 - Create TEQL with multiple device
ok 3 34a9 - Delete TEQL with valid handle
ok 4 6289 - Show TEQL stats
---
v3: add config
v2: modify subject prefix
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 84a0: Create TEQL with default setting
Test 7734: Create TEQL with multiple device
Test 34a9: Delete TEQL with valid handle
Test 6289: Show TEQL stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 6430: Create TBF with default setting
Test 0518: Create TBF with mtu setting
Test 320a: Create TBF with peakrate setting
Test 239b: Create TBF with latency setting
Test c975: Create TBF with overhead setting
Test 948c: Create TBF with linklayer setting
Test 3549: Replace TBF with mtu
Test f948: Change TBF with latency time
Test 2348: Show TBF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test ba39: Add taprio Qdisc to multi-queue device (8 queues)
Test 9462: Add taprio Qdisc with multiple sched-entry
Test 8d92: Add taprio Qdisc with txtime-delay
Test d092: Delete taprio Qdisc with valid handle
Test 8471: Show taprio class
Test 0a85: Add taprio Qdisc to single-queue device
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 283e: Create skbprio with default setting
Test c086: Create skbprio with limit setting
Test 6733: Change skbprio with limit setting
Test 2958: Show skbprio class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 7482: Create SFQ with default setting
Test c186: Create SFQ with limit setting
Test ae23: Create SFQ with perturb setting
Test a430: Create SFQ with quantum setting
Test 4539: Create SFQ with divisor setting
Test b089: Create SFQ with flows setting
Test 99a0: Create SFQ with depth setting
Test 7389: Create SFQ with headdrop setting
Test 6472: Create SFQ with redflowlimit setting
Test 8929: Show SFQ class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 3294: Create SFB with default setting
Test 430a: Create SFB with rehash setting
Test 3410: Create SFB with db setting
Test 49a0: Create SFB with limit setting
Test 1241: Create SFB with max setting
Test 3249: Create SFB with target setting
Test 30a9: Create SFB with increment setting
Test 239a: Create SFB with decrement setting
Test 9301: Create SFB with penalty_rate setting
Test 2a01: Create SFB with penalty_burst setting
Test 3209: Change SFB with rehash setting
Test 5447: Show SFB class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 3289: Create PLUG with default setting
Test 0917: Create PLUG with block setting
Test 483b: Create PLUG with release setting
Test 4995: Create PLUG with release_indefinite setting
Test 389c: Create PLUG with limit setting
Test 384a: Delete PLUG with valid handle
Test 439a: Replace PLUG with limit setting
Test 9831: Change PLUG with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 900c: Create pfifo_fast with default setting
Test 7470: Dump pfifo_fast stats
Test b974: Replace pfifo_fast with different handle
Test 3240: Delete pfifo_fast with valid handle
Test 4385: Delete pfifo_fast with invalid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 4812: Create HHF with default setting
Test 8a92: Create HHF with limit setting
Test 3491: Create HHF with quantum setting
Test ba04: Create HHF with reset_timeout setting
Test 4238: Create HHF with admit_bytes setting
Test 839f: Create HHF with evict_timeout setting
Test a044: Create HHF with non_hh_weight setting
Test 32f9: Change HHF with limit setting
Test 385e: Show HHF class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 8942: Create GRED with default setting
Test 5783: Create GRED with grio setting
Test 8a09: Create GRED with limit setting
Test 48cb: Create GRED with ecn setting
Test 763a: Change GRED setting
Test 8309: Show GRED class
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 983b: Create FQ with default setting
Test 38a1: Create FQ with limit packet setting
Test 0a18: Create FQ with flow_limit setting
Test 2390: Create FQ with quantum setting
Test 845b: Create FQ with initial_quantum setting
Test 9398: Create FQ with maxrate setting
Test 342c: Create FQ with nopacing setting
Test 6391: Create FQ with refill_delay setting
Test 238b: Create FQ with low_rate_threshold setting
Test 7582: Create FQ with orphan_mask setting
Test 4894: Create FQ with timer_slack setting
Test 324c: Create FQ with ce_threshold setting
Test 424a: Create FQ with horizon time setting
Test 89e1: Create FQ with horizon_cap setting
Test 32e1: Delete FQ with valid handle
Test 49b0: Replace FQ with limit setting
Test 9478: Change FQ with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 34ba: Create ETF with default setting
Test 438f: Create ETF with delta nanos setting
Test 9041: Create ETF with deadline_mode setting
Test 9a0c: Create ETF with skip_sock_check setting
Test 2093: Delete ETF with valid handle
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 983a: Create CODEL with default setting
Test 38aa: Create CODEL with limit packet setting
Test 9178: Create CODEL with target setting
Test 78d1: Create CODEL with interval setting
Test 238a: Create CODEL with ecn setting
Test 939c: Create CODEL with ce_threshold setting
Test 8380: Delete CODEL with valid handle
Test 289c: Replace CODEL with limit setting
Test 0648: Change CODEL with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 8937: Create CHOKE with default setting
Test 48c0: Create CHOKE with min packet setting
Test 38c1: Create CHOKE with max packet setting
Test 234a: Create CHOKE with ecn setting
Test 4380: Create CHOKE with burst setting
Test 48c7: Delete CHOKE with valid handle
Test 4398: Replace CHOKE with min setting
Test 0301: Change CHOKE with limit setting
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test 7628: Create ATM with default setting
Test 390a: Delete ATM with valid handle
Test 32a0: Show ATM class
Test 6310: Dump ATM stats
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Miguel, Alex and Wedson will be maintaining the Rust support.
Boqun, Gary and Björn will be reviewers.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
The following warning is displayed when the tcp6-multi-diffip11 stress
test case of the LTP test suite is tested:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ns-tcpserver:48198]
CPU: 0 PID: 48198 Comm: ns-tcpserver Kdump: loaded Not tainted 6.0.0-rc6+ #39
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : des3_ede_encrypt+0x27c/0x460 [libdes]
lr : 0x3f
sp : ffff80000ceaa1b0
x29: ffff80000ceaa1b0 x28: ffff0000df056100 x27: ffff0000e51e5280
x26: ffff80004df75030 x25: ffff0000e51e4600 x24: 000000000000003b
x23: 0000000000802080 x22: 000000000000003d x21: 0000000000000038
x20: 0000000080000020 x19: 000000000000000a x18: 0000000000000033
x17: ffff0000e51e4780 x16: ffff80004e2d1448 x15: ffff80004e2d1248
x14: ffff0000e51e4680 x13: ffff80004e2d1348 x12: ffff80004e2d1548
x11: ffff80004e2d1848 x10: ffff80004e2d1648 x9 : ffff80004e2d1748
x8 : ffff80004e2d1948 x7 : 000000000bcaf83d x6 : 000000000000001b
x5 : ffff80004e2d1048 x4 : 00000000761bf3bf x3 : 000000007f1dd0a3
x2 : ffff0000e51e4780 x1 : ffff0000e3b9a2f8 x0 : 00000000db44e872
Call trace:
des3_ede_encrypt+0x27c/0x460 [libdes]
crypto_des3_ede_encrypt+0x1c/0x30 [des_generic]
crypto_cbc_encrypt+0x148/0x190
crypto_skcipher_encrypt+0x2c/0x40
crypto_authenc_encrypt+0xc8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp6_output_tail+0x1c8/0x5d0 [esp6]
esp6_output+0x120/0x278 [esp6]
xfrm_output_one+0x458/0x4ec
xfrm_output_resume+0x6c/0x1f0
xfrm_output+0xac/0x4ac
__xfrm6_output+0x130/0x270
xfrm6_output+0x60/0xec
ip6_xmit+0x2ec/0x5bc
inet6_csk_xmit+0xbc/0x10c
__tcp_transmit_skb+0x460/0x8c0
tcp_write_xmit+0x348/0x890
__tcp_push_pending_frames+0x44/0x110
tcp_rcv_established+0x3c8/0x720
tcp_v6_do_rcv+0xdc/0x4a0
tcp_v6_rcv+0xc24/0xcb0
ip6_protocol_deliver_rcu+0xf0/0x574
ip6_input_finish+0x48/0x7c
ip6_input+0x48/0xc0
ip6_rcv_finish+0x80/0x9c
xfrm_trans_reinject+0xb0/0xf4
tasklet_action_common.constprop.0+0xf8/0x134
tasklet_action+0x30/0x3c
__do_softirq+0x128/0x368
do_softirq+0xb4/0xc0
__local_bh_enable_ip+0xb0/0xb4
put_cpu_fpsimd_context+0x40/0x70
kernel_neon_end+0x20/0x40
sha1_base_do_update.constprop.0.isra.0+0x11c/0x140 [sha1_ce]
sha1_ce_finup+0x94/0x110 [sha1_ce]
crypto_shash_finup+0x34/0xc0
hmac_finup+0x48/0xe0
crypto_shash_finup+0x34/0xc0
shash_digest_unaligned+0x74/0x90
crypto_shash_digest+0x4c/0x9c
shash_ahash_digest+0xc8/0xf0
shash_async_digest+0x28/0x34
crypto_ahash_digest+0x48/0xcc
crypto_authenc_genicv+0x88/0xcc [authenc]
crypto_authenc_encrypt+0xd8/0xfc [authenc]
crypto_aead_encrypt+0x2c/0x40
echainiv_encrypt+0x144/0x1a0 [echainiv]
crypto_aead_encrypt+0x2c/0x40
esp6_output_tail+0x1c8/0x5d0 [esp6]
esp6_output+0x120/0x278 [esp6]
xfrm_output_one+0x458/0x4ec
xfrm_output_resume+0x6c/0x1f0
xfrm_output+0xac/0x4ac
__xfrm6_output+0x130/0x270
xfrm6_output+0x60/0xec
ip6_xmit+0x2ec/0x5bc
inet6_csk_xmit+0xbc/0x10c
__tcp_transmit_skb+0x460/0x8c0
tcp_write_xmit+0x348/0x890
__tcp_push_pending_frames+0x44/0x110
tcp_push+0xb4/0x14c
tcp_sendmsg_locked+0x71c/0xb64
tcp_sendmsg+0x40/0x6c
inet6_sendmsg+0x4c/0x80
sock_sendmsg+0x5c/0x6c
__sys_sendto+0x128/0x15c
__arm64_sys_sendto+0x30/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x170/0x194
do_el0_svc+0x38/0x4c
el0_svc+0x28/0xe0
el0t_64_sync_handler+0xbc/0x13c
el0t_64_sync+0x180/0x184
Get softirq info by bcc tool:
./softirqs -NT 10
Tracing soft irq event time... Hit Ctrl-C to end.
15:34:34
SOFTIRQ TOTAL_nsecs
block 158990
timer 20030920
sched 46577080
net_rx 676746820
tasklet 9906067650
15:34:45
SOFTIRQ TOTAL_nsecs
block 86100
sched 38849790
net_rx 676532470
timer 1163848790
tasklet 9409019620
15:34:55
SOFTIRQ TOTAL_nsecs
sched 58078450
net_rx 475156720
timer 533832410
tasklet 9431333300
The tasklet software interrupt takes too much time. Therefore, the
xfrm_trans_reinject executor is changed from tasklet to workqueue. Add add
spin lock to protect the queue. This reduces the processing flow of the
tcp_sendmsg function in this scenario.
Fixes: acf568ee859f0 ("xfrm: Reinject transport-mode packets through tasklet")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The beginning of a set of Rust modules that showcase how Rust
modules look like and how to use the abstracted kernel features.
It also includes an example of a Rust host program with
several modules.
These samples also double as tests in the CI.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Milan Landaverde <milan@mdaverde.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Note that only x86_64 is covered and not all features nor mitigations
are handled, but it is enough as a starting point and showcases
the basics needed to add Rust support for a new architecture.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Most of the documentation for Rust is written within the source code
itself, as it is idiomatic for Rust projects. This applies to both
the shared infrastructure at `rust/` as well as any other Rust module
(e.g. drivers) written across the kernel.
However, these documents contain general information that does not
fit particularly well in the source code, like the Quick Start guide.
It also contains a few other small changes elsewhere in the
documentation folder.
Reviewed-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com>
Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com>
Co-developed-by: Finn Behrens <me@kloenk.de>
Signed-off-by: Finn Behrens <me@kloenk.de>
Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com>
Co-developed-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Co-developed-by: Wu XiangCheng <bobwxc@email.cn>
Signed-off-by: Wu XiangCheng <bobwxc@email.cn>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de>
Co-developed-by: Yuki Okushi <jtitor@2k36.org>
Signed-off-by: Yuki Okushi <jtitor@2k36.org>
Co-developed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Co-developed-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Co-developed-by: Julian Merkle <me@jvmerkle.de>
Signed-off-by: Julian Merkle <me@jvmerkle.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
