| Age | Commit message (Collapse) | Author |
|---|
|
linux/arm-smccc.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/1599643682-10404-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.9
Most of this is various driver specific fixes, none of which are
terribly exciting in themselves, plus one core fix adding and using a
new DAI lookup function to deal with a lockdep warning.
|
|
Similar to how CONT_PTE_SHIFT is determined, this introduces a new
kernel option (CONFIG_CONT_PMD_SHIFT) to determine CONT_PMD_SHIFT.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200910095936.20307-3-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
CONT_PTE_SHIFT actually depends on CONFIG_ARM64_CONT_SHIFT. It's
reasonable to reflect the dependency:
* This renames CONFIG_ARM64_CONT_SHIFT to CONFIG_ARM64_CONT_PTE_SHIFT,
so that we can introduce CONFIG_ARM64_CONT_PMD_SHIFT later.
* CONT_{SHIFT, SIZE, MASK}, defined in page-def.h are removed as they
are not used by anyone.
* CONT_PTE_SHIFT is determined by CONFIG_ARM64_CONT_PTE_SHIFT.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200910095936.20307-2-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The macro was introduced by commit <ecf35a237a85> ("arm64: PTE/PMD
contiguous bit definition") at the beginning. It's only used by
commit <348a65cdcbbf> ("arm64: Mark kernel page ranges contiguous"),
which was reverted later by commit <667c27597ca8>. This makes the
macro unused.
This removes the unused macro (CONT_RANGE_OFFSET).
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20200910095936.20307-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
HWCAP name arrays (hwcap_str, compat_hwcap_str, compat_hwcap2_str) that are
scanned for /proc/cpuinfo are detached from their bit definitions making it
vulnerable and difficult to correlate. It is also bit problematic because
during /proc/cpuinfo dump these arrays get traversed sequentially assuming
they reflect and match actual HWCAP bit sequence, to test various features
for a given CPU. This redefines name arrays per their HWCAP bit definitions
. It also warns after detecting any feature which is not expected on arm64.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1599630535-29337-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
* powercap:
powercap: make documentation reflect code
powercap/intel_rapl: add support for AlderLake
powercap/intel_rapl: add support for RocketLake
powercap/intel_rapl: add support for TigerLake Desktop
|
|
In certain page migration situations, a THP page can be migrated without
being split into it's constituent subpages. This saves time required to
split a THP and put it back together when required. But it also saves an
wider address range translation covered by a single TLB entry, reducing
future page fault costs.
A previous patch changed platform THP helpers per generic memory semantics,
clearing the path for THP migration support. This adds two more THP helpers
required to create PMD migration swap entries. Now enable THP migration via
ARCH_ENABLE_THP_MIGRATION.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1599627183-14453-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pmd_present() and pmd_trans_huge() are expected to behave in the following
manner during various phases of a given PMD. It is derived from a previous
detailed discussion on this topic [1] and present THP documentation [2].
pmd_present(pmd):
- Returns true if pmd refers to system RAM with a valid pmd_page(pmd)
- Returns false if pmd refers to a migration or swap entry
pmd_trans_huge(pmd):
- Returns true if pmd refers to system RAM and is a trans huge mapping
-------------------------------------------------------------------------
| PMD states | pmd_present | pmd_trans_huge |
-------------------------------------------------------------------------
| Mapped | Yes | Yes |
-------------------------------------------------------------------------
| Splitting | Yes | Yes |
-------------------------------------------------------------------------
| Migration/Swap | No | No |
-------------------------------------------------------------------------
The problem:
PMD is first invalidated with pmdp_invalidate() before it's splitting. This
invalidation clears PMD_SECT_VALID as below.
PMD Split -> pmdp_invalidate() -> pmd_mkinvalid -> Clears PMD_SECT_VALID
Once PMD_SECT_VALID gets cleared, it results in pmd_present() return false
on the PMD entry. It will need another bit apart from PMD_SECT_VALID to re-
affirm pmd_present() as true during the THP split process. To comply with
above mentioned semantics, pmd_trans_huge() should also check pmd_present()
first before testing presence of an actual transparent huge mapping.
The solution:
Ideally PMD_TYPE_SECT should have been used here instead. But it shares the
bit position with PMD_SECT_VALID which is used for THP invalidation. Hence
it will not be there for pmd_present() check after pmdp_invalidate().
A new software defined PMD_PRESENT_INVALID (bit 59) can be set on the PMD
entry during invalidation which can help pmd_present() return true and in
recognizing the fact that it still points to memory.
This bit is transient. During the split process it will be overridden by a
page table page representing normal pages in place of erstwhile huge page.
Other pmdp_invalidate() callers always write a fresh PMD value on the entry
overriding this transient PMD_PRESENT_INVALID bit, which makes it safe.
[1]: https://lkml.org/lkml/2018/10/17/231
[2]: https://www.kernel.org/doc/Documentation/vm/transhuge.txt
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/1599627183-14453-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi device tree lacks DMA
channels for DSPI, so naturally, the driver fails to probe:
[ 2.945302] fsl-dspi 2100000.spi: rx dma channel not available
[ 2.951134] fsl-dspi 2100000.spi: can't get dma channels
In retrospect, this should have been obvious, because LS2080A, LS2085A
LS2088A and LX2160A don't appear to have an eDMA module at all. Looking
again at their datasheets, the CTARE register (which is specific to XSPI
functionality) seems to be documented, so switch them to XSPI mode
instead.
Fixes: 0feaf8f5afe0 ("spi: spi-fsl-dspi: Convert the instantiations that support it to DMA")
Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Tested-by: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20200910121532.1138596-1-olteanv@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Centaur family >=7 CPUs specific initialization support.
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1599562666-31351-3-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
Use a normal if statements instead of a two-condition switch-case.
[ bp: Massage commit message. ]
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1599562666-31351-2-git-send-email-TonyWWang-oc@zhaoxin.com
|
|
If an exception needs to be handled while reading an MSR - which is in
most of the cases caused by a #GP on a non-existent MSR - then this
is most likely the incarnation of a BIOS or a hardware bug. Such bug
violates the architectural guarantee that MCA banks are present with all
MSRs belonging to them.
The proper fix belongs in the hardware/firmware - not in the kernel.
Handling an #MC exception which is raised while an NMI is being handled
would cause the nasty NMI nesting issue because of the shortcoming of
IRET of reenabling NMIs when executed. And the machine is in an #MC
context already so <Deity> be at its side.
Tracing MSR accesses while in #MC is another no-no due to tracing being
inherently a bad idea in atomic context:
vmlinux.o: warning: objtool: do_machine_check()+0x4a: call to mce_rdmsrl() leaves .noinstr.text section
so remove all that "additional" functionality from mce_rdmsrl() and
provide it with a special exception handler which panics the machine
when that MSR is not accessible.
The exception handler prints a human-readable message explaining what
the panic reason is but, what is more, it panics while in the #GP
handler and latter won't have executed an IRET, thus opening the NMI
nesting issue in the case when the #MC has happened while handling
an NMI. (#MC itself won't be reenabled until MCG_STATUS hasn't been
cleared).
Suggested-by: Andy Lutomirski <luto@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
[ Add missing prototypes for ex_handler_* ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20200906212130.GA28456@zn.tnic
|
|
Remove link to litmus tests that didn't make it to upstream. Fix ringbuf
benchmark link.
I wasn't able to test this with `make htmldocs`, unfortunately, because of
Sphinx dependencies. But bench_ringbufs.c path is certainly correct now.
Fixes: 97abb2b39682 ("docs/bpf: Add BPF ring buffer design notes")
Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200910225245.2896991-1-andriin@fb.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.9-rc5:
- Fix double free in virtio.
- Add missing put_device in sun4i, and other fixes.
- Small ingenic fixes.
- Handle sun4i alpha on lowest plane correctly.
- Remove output->enabled from virtio, as it should use crtc_state.
- Fix tve200 enable/disable.
- Documentation fix.
- Fix virtio unblank.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/478b49d1-b1b3-c983-7056-8a89249be435@mblankhorst.nl
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc5:
- Fix regression leading to audio probe failure
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875z8m2hss.fsf@intel.com
|
|
Increase Rx ring size to address issue where hardware is reaching
the receive work limit.
Before:
[ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached
Signed-off-by: Lucy Yan <lucyyan@google.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no @validate argument.
CC: Johannes Berg <johannes.berg@intel.com>
Fixes: 3de644035446 ("netlink: re-add parse/validate functions in strict mode")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The
field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where
each value is a number of a buffer to direct that priority's traffic to.
That value is however never validated to lie within the bounds set by
DCBX_MAX_BUFFERS. The only driver that currently implements the callback is
mlx5 (maintainers CCd), and that does not do any validation either, in
particual allowing incorrect configuration if the prio2buffer value does
not fit into 4 bits.
Instead of offloading the need to validate the buffer index to drivers, do
it right there in core, and bounce the request if the value is too large.
CC: Parav Pandit <parav@nvidia.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
Fixes: e549f6f9c098 ("net/dcb: Add dcbnl buffer attribute")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
net: Fix bridge enslavement failure
Patch #1 fixes an issue in which an upper netdev cannot be enslaved to a
bridge when it has multiple netdevs with different parent identifiers
beneath it.
Patch #2 adds a test case using two netdevsim instances.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Test that an upper device of netdevs with different parent IDs can be
enslaved to a bridge.
The test fails without previous commit.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a netdev is enslaved to a bridge, its parent identifier is queried.
This is done so that packets that were already forwarded in hardware
will not be forwarded again by the bridge device between netdevs
belonging to the same hardware instance.
The operation fails when the netdev is an upper of netdevs with
different parent identifiers.
Instead of failing the enslavement, have dev_get_port_parent_id() return
'-EOPNOTSUPP' which will signal the bridge to skip the query operation.
Other callers of the function are not affected by this change.
Fixes: 7e1146e8c10c ("net: devlink: introduce devlink_compat_switch_id_get() helper")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Release first buffer as last one since it contains references
to subsequent fragments. This code will be optimized introducing
multi-buffer bit in xdp_buff structure.
Fixes: ca0e014609f05 ("net: mvneta: move skb build after descriptors processing")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checking for the lack of epitems refering to the epoll we want to insert into
is not enough; we might have an insertion of that epoll into another one that
has already collected the set of files to recheck for excessive reverse paths,
but hasn't gotten to creating/inserting the epitem for it.
However, any such insertion in progress can be detected - it will update the
generation count in our epoll when it's done looking through it for files
to check. That gets done under ->mtx of our epoll and that allows us to
detect that safely.
We are *not* holding epmutex here, so the generation count is not stable.
However, since both the update of ep->gen by loop check and (later)
insertion into ->f_ep_link are done with ep->mtx held, we are fine -
the sequence is
grab epmutex
bump loop_check_gen
...
grab tep->mtx // 1
tep->gen = loop_check_gen
...
drop tep->mtx // 2
...
grab tep->mtx // 3
...
insert into ->f_ep_link
...
drop tep->mtx // 4
bump loop_check_gen
drop epmutex
and if the fastpath check in another thread happens for that
eventpoll, it can come
* before (1) - in that case fastpath is just fine
* after (4) - we'll see non-empty ->f_ep_link, slow path
taken
* between (2) and (3) - loop_check_gen is stable,
with ->mtx providing barriers and we end up taking slow path.
Note that ->f_ep_link emptiness check is slightly racy - we are protected
against insertions into that list, but removals can happen right under us.
Not a problem - in the worst case we'll end up taking a slow path for
no good reason.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
lpass_core_sc7180_probe() misses to call pm_clk_destroy() and
pm_runtime_disable() in error paths. Correct goto target to fix it.
This issue is found by code inspection.
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20200827141629.101802-1-jingxiangfeng@huawei.com
Fixes: edab812d802d ("clk: qcom: lpass: Add support for LPASS clock controller for SC7180")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Wait until the QDIO data connection is severed. Otherwise the device
might still be processing the buffers, and end up accessing skb data
that we already freed.
Fixes: 8b5026bc1693 ("s390/qeth: fix qdio teardown after early init error")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the weird space inside the NETIF_F_CSUM_MASK.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), we use blackhole_netdev to invalidate dst entries
instead of loopback device anymore.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs fixes from Jaegeuk Kim:
"Small bug fixes for:
- SMR drive fix
- infinite loop when building free node ids
- EOF at DIO read"
* tag 'f2fs-for-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: Return EOF on unaligned end of file DIO read
f2fs: fix indefinite loop scanning for free nid
f2fs: Fix type of section block count variables
|
|
There are a couple bugs here:
1) If opt[1] is zero then this results in a forever loop. If the value
is less than 2 then it is invalid.
2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can
result in memory corruption.
In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead
of "len" because, if "opt[1]" is less than sizeof(valid_accm) then
"nak_len" gets out of sync and it can lead to memory corruption in the
next iterations through the loop. In case of LCP_OPTION_MAGIC, the
only valid value for opt[1] is 6, but the code is trying to log invalid
data so we should only discard the data when "len" is less than 6
because that leads to a read overflow.
Reported-by: ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com>
Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the micrel phy driver calls phy_init_hw() as a workaround,
the commit 9886a4dbd2aa ("net: phy: call phy_disable_interrupts()
in phy_init_hw()") disables the interrupt unexpectedly. So,
call phy_disable_interrupts() in phy_attach_direct() instead.
Otherwise, the phy cannot link up after the ethernet cable was
disconnected.
Note that other drivers (like at803x.c) also calls phy_init_hw().
So, perhaps, the driver caused a similar issue too.
Fixes: 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous change "hv_netvsc: Switch the data path at the right time
during hibernation" adds the call of netvsc_vf_changed() upon
NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message
when the VF is brought UP or DOWN.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When netvsc_resume() is called, the mlx5 VF NIC has not been resumed yet,
so in the future the host might sliently fail the call netvsc_vf_changed()
-> netvsc_switch_datapath() there, even if the call works now.
Call netvsc_vf_changed() in the NETDEV_CHANGE event handler: at that time
the mlx5 VF NIC has been resumed.
Fixes: 19162fd4063a ("hv_netvsc: Fix hibernation for mlx5 VF driver")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently there is concurrent reset and enqueue operation for the
same lockless qdisc when there is no lock to synchronize the
q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in
qdisc_deactivate() called by dev_deactivate_queue(), which may cause
out-of-bounds access for priv->ring[] in hns3 driver if user has
requested a smaller queue num when __dev_xmit_skb() still enqueue a
skb with a larger queue_mapping after the corresponding qdisc is
reset, and call hns3_nic_net_xmit() with that skb later.
Reused the existing synchronize_net() in dev_deactivate_many() to
make sure skb with larger queue_mapping enqueued to old qdisc(which
is saved in dev_queue->qdisc_sleeping) will always be reset when
dev_reset_queue() is called.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
property should be specified on port nodes. However, the microchip
drivers read it from the switch node.
Let the driver use the per-port property and fall back to the old
location with a warning.
Fix in-tree users.
Signed-off-by: Helmut Grohne <helmut.grohne@intenta.de>
Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mptcp_pm_nl_get_local_id may be called in interrupt context, so we need to
use GFP_ATOMIC flag to allocate memory to avoid sleeping in atomic context.
[ 280.209809] BUG: sleeping function called from invalid context at mm/slab.h:498
[ 280.209812] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1680, name: kworker/1:3
[ 280.209814] INFO: lockdep is turned off.
[ 280.209816] CPU: 1 PID: 1680 Comm: kworker/1:3 Tainted: G W 5.9.0-rc3-mptcp+ #146
[ 280.209818] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 280.209820] Workqueue: events mptcp_worker
[ 280.209822] Call Trace:
[ 280.209824] <IRQ>
[ 280.209826] dump_stack+0x77/0xa0
[ 280.209829] ___might_sleep.cold+0xa6/0xb6
[ 280.209832] kmem_cache_alloc_trace+0x1d1/0x290
[ 280.209835] mptcp_pm_nl_get_local_id+0x23c/0x410
[ 280.209840] subflow_init_req+0x1e9/0x2ea
[ 280.209843] ? inet_reqsk_alloc+0x1c/0x120
[ 280.209845] ? kmem_cache_alloc+0x264/0x290
[ 280.209849] tcp_conn_request+0x303/0xae0
[ 280.209854] ? printk+0x53/0x6a
[ 280.209857] ? tcp_rcv_state_process+0x28f/0x1374
[ 280.209859] tcp_rcv_state_process+0x28f/0x1374
[ 280.209864] ? tcp_v4_do_rcv+0xb3/0x1f0
[ 280.209866] tcp_v4_do_rcv+0xb3/0x1f0
[ 280.209869] tcp_v4_rcv+0xed6/0xfa0
[ 280.209873] ip_protocol_deliver_rcu+0x28/0x270
[ 280.209875] ip_local_deliver_finish+0x89/0x120
[ 280.209877] ip_local_deliver+0x180/0x220
[ 280.209881] ip_rcv+0x166/0x210
[ 280.209885] __netif_receive_skb_one_core+0x82/0x90
[ 280.209888] process_backlog+0xd6/0x230
[ 280.209891] net_rx_action+0x13a/0x410
[ 280.209895] __do_softirq+0xcf/0x468
[ 280.209899] asm_call_on_stack+0x12/0x20
[ 280.209901] </IRQ>
[ 280.209903] ? ip_finish_output2+0x240/0x9a0
[ 280.209906] do_softirq_own_stack+0x4d/0x60
[ 280.209908] do_softirq.part.0+0x2b/0x60
[ 280.209911] __local_bh_enable_ip+0x9a/0xa0
[ 280.209913] ip_finish_output2+0x264/0x9a0
[ 280.209916] ? rcu_read_lock_held+0x4d/0x60
[ 280.209920] ? ip_output+0x7a/0x250
[ 280.209922] ip_output+0x7a/0x250
[ 280.209925] ? __ip_finish_output+0x330/0x330
[ 280.209928] __ip_queue_xmit+0x1dc/0x5a0
[ 280.209931] __tcp_transmit_skb+0xa0f/0xc70
[ 280.209937] tcp_connect+0xb03/0xff0
[ 280.209939] ? lockdep_hardirqs_on_prepare+0xe7/0x190
[ 280.209942] ? ktime_get_with_offset+0x125/0x150
[ 280.209944] ? trace_hardirqs_on+0x1c/0xe0
[ 280.209948] tcp_v4_connect+0x449/0x550
[ 280.209953] __inet_stream_connect+0xbb/0x320
[ 280.209955] ? mark_held_locks+0x49/0x70
[ 280.209958] ? lockdep_hardirqs_on_prepare+0xe7/0x190
[ 280.209960] ? __local_bh_enable_ip+0x6b/0xa0
[ 280.209963] inet_stream_connect+0x32/0x50
[ 280.209966] __mptcp_subflow_connect+0x1fd/0x242
[ 280.209972] mptcp_pm_create_subflow_or_signal_addr+0x2db/0x600
[ 280.209975] mptcp_worker+0x543/0x7a0
[ 280.209980] process_one_work+0x26d/0x5b0
[ 280.209984] ? process_one_work+0x5b0/0x5b0
[ 280.209987] worker_thread+0x48/0x3d0
[ 280.209990] ? process_one_work+0x5b0/0x5b0
[ 280.209993] kthread+0x117/0x150
[ 280.209996] ? kthread_park+0x80/0x80
[ 280.209998] ret_from_fork+0x22/0x30
Fixes: 01cacb00b35cb ("mptcp: add netlink-based PM")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Geliang Tang says:
====================
mptcp: fix subflow's local_id/remote_id issues
v2:
- add Fixes tags;
- simply with 'return addresses_equal';
- use 'reversed Xmas tree' way.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch set the init remote_id to zero, otherwise it will be a random
number.
Then it added the missing subflow's remote_id setting code both in
__mptcp_subflow_connect and in subflow_ulp_clone.
Fixes: 01cacb00b35cb ("mptcp: add netlink-based PM")
Fixes: ec3edaa7ca6ce ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: f296234c98a8f ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In mptcp_pm_nl_get_local_id, skc_local is the same as msk_local, so it
always return 0. Thus every subflow's local_id is 0. It's incorrect.
This patch fixed this issue.
Also, we need to ignore the zero address here, like 0.0.0.0 in IPv4. When
we use the zero address as a local address, it means that we can use any
one of the local addresses. The zero address is not a new address, we don't
need to add it to PM, so this patch added a new function address_zero to
check whether an address is the zero address, if it is, we ignore this
address.
Fixes: 01cacb00b35cb ("mptcp: add netlink-based PM")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.
----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>
int main(int argc, char *argv[])
{
int fds[2] = { -1, -1 };
socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
if (fork() == 0)
_exit(read(fds[0], NULL, 1));
shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
wait(NULL); /* To be woken up by _exit(). */
return 0;
}
----------
Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix up the documentation of the struct powercap_control_type members
to match the code.
Also fixup stray whitespace.
Signed-off-by: Amit Kucheria <amitk@kernel.org>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix kernel-doc warning in <linux/device.h>:
../include/linux/device.h:613: warning: Function parameter or member 'em_pd' not described in 'device'
Fixes: 1bc138c62295 ("PM / EM: add support for other devices than CPUs in Energy Model")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add intel_rapl support for the AlderLake platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add intel_rapl support for the RocketLake platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add intel_rapl support for the TigerLake desktop platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 14775b04964264189caa4a0862eac05dab8c0502 as there
were still some parsing problems with it, and the follow-on patch for
it.
Let's revisit it later, just drop it for now.
Cc: <jbaron@akamai.com>
Cc: Jim Cromie <jim.cromie@gmail.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 14775b049642 ("dyndbg: accept query terms like file=bar and module=foo")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 42f07816ac0cc797928119cc039c414ae2b95d34 as it
still causes problems. It will be resolved later, let's revert it so we
can also revert the original patch this was supposed to be helping with.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 42f07816ac0c ("dyndbg: fix problem parsing format="foo bar"")
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private symbol namespace so there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2a7 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200909225354.3118328-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Evgeniy does not have the time nor capacity to maintain the
connector subsystem any longer, so just move it under networking
as that is effectively what has been happening lately.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NVMe fixes from Christoph.
"nvme fixes for 5.9
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)"
* tag 'nvme-5.9-2020-09-10' of git://git.infradead.org/nvme:
nvme-fabrics: allow to queue requests for live queues
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
|
