| Age | Commit message (Collapse) | Author |
|---|
|
In case the uvc gadget is super speed plus, the corresponding config
descriptor wasn't initialized. As a result, the host will not recognize
the devices when using super speed plus connection.
This patch initializes them to super speed descriptors.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shuzhen Wang <shuzhenwang@google.com>
Link: https://lore.kernel.org/r/20231027183440.1994315-1-shuzhenwang@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
compatibility
Change lower bcdDevice value for "Super Top USB 2.0 SATA BRIDGE" to match
1.50. I have such an older device with bcdDevice=1.50 and it will not work
otherwise.
Cc: stable@vger.kernel.org
Signed-off-by: Liha Sikanen <lihasika@gmail.com>
Link: https://lore.kernel.org/r/ccf7d12a-8362-4916-b3e0-f4150f54affd@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update tsx_cycles_per_elision as per:
https://github.com/intel/perfmon/pull/116
Prefer the el-start event rather than cycles-t for detecting whether
the metric will work as HLE may be disabled. Remove the metric from
sapphirerapids that has no el-start event.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-9-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Spelling fixes were already incorporated in the Linux perf tree,
update the version number to reflect this.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-8-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Update westmereex events from v3 to v4 fixing a spelling issue.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-7-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Update meteorlake from v1.04 to v1.06 adding the changes from:
https://github.com/intel/perfmon/commit/bc84df043091ec7c98c0629f3d074d9d7a108194
https://github.com/intel/perfmon/commit/405d3ee987d756b5b5d9a64d8a8fa77559822ecf
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-6-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Update knightslanding from v10 to v16 adding the changes from:
https://github.com/intel/perfmon/commit/6c1f169f6ed63ee1fd75ebb303d0fd06d71196f5
https://github.com/intel/perfmon/commit/b22ca587ec8b5ac20471ea2f14924f63e63afe9d
https://github.com/intel/perfmon/commit/e685286f083ee81cb7dafd0cd8546c79ee433187
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-5-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add a missed space.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The spelling of "in-flight" was switched to "inflight".
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Update emeraldrapids to v1.01 from v1.00 adding the changes from:
https://github.com/intel/perfmon/commit/3993b600e032a9fd443ffd828aab73de7cb167e5
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Update alderlake and alderlaken events from v1.21 to v1.23 adding the
changes from:
https://github.com/intel/perfmon/commit/8df4db9433a2aab59dbbac1a70281032d1af7734
https://github.com/intel/perfmon/commit/846bd247c6e04acc572ca56c992e9e65852bbe63
The tsx_cycles_per_elision metric is updated from PR:
https://github.com/intel/perfmon/pull/116
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Edward Baker <edward.baker@intel.com>
Cc: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20231026003149.3287633-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Some of the routines in ACPI driver/acpi/tables.c can be shared with
parsing CDAT. CDAT is a device-provided data structure that is formatted
similar to a platform provided ACPI table. CDAT is used by CXL and can
exist on platforms that do not use ACPI. Split out the common routine
from ACPI to accommodate platforms that do not support ACPI and move that
to /lib. The common routines can be built outside of ACPI if
FIRMWARE_TABLES is selected.
Link: https://lore.kernel.org/linux-cxl/CAJZ5v0jipbtTNnsA0-o5ozOk8ZgWnOg34m34a9pPenTyRLj=6A@mail.gmail.com/
Suggested-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/169713683430.2205276.17899451119920103445.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add read_cdat_data() call in cxl_switch_port_probe() to allow
reading of CDAT data for CXL switches. read_cdat_data() needs
to be adjusted for the retrieving of the PCIe device depending
on if the passed in port is endpoint or switch.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169713682855.2205276.6418370379144967443.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
A CDAT table is available from a CXL device. The table is read by the
driver and cached in software. With the CXL subsystem needing to parse the
CDAT table, the checksum should be verified. Add checksum verification
after the CDAT table is read from device.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169713682277.2205276.2687265961314933628.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Export the QoS Throttling Group ID from the CXL Fixed Memory Window
Structure (CFMWS) under the root decoder sysfs attributes as qos_class.
CXL rev3.0 9.17.1.3 CXL Fixed Memory Window Structure (CFMWS)
cxl cli will use this id to match with the _DSM retrieved id for a
hot-plugged CXL memory device DPA memory range to make sure that the
DPA range is under the right CFMWS window.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169713681699.2205276.14475306324720093079.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This attribute allows cxl-cli to determine whether there are decoders
committed to a memdev. This is only a snapshot of the state, and
doesn't offer any protection or serialization against a concurrent
disable-region operation.
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/169747907439.272156.10261062080830155662.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Add a helper to retrieve the number of decoders committed for the port.
Replace all the open coding of the calculation with the helper.
Link: https://lore.kernel.org/linux-cxl/651c98472dfed_ae7e729495@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/169747906849.272156.1729290904857372335.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
struct cxl_register_map carries a @dev parameter for devm operations.
Simplify the function interface to use that instead of a separate @dev
argument.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-21-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Trivial change that renames variable phys_addr in
cxl_map_component_regs() to shorten its length to keep the 80 char
size limit for the line and also for consistency between the different
paths.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-20-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
handling
AER corrected and uncorrectable internal errors (CIE/UIE) are masked
in their corresponding mask registers per default once in power-up
state. [1][2] Enable internal errors for RCECs to receive CXL
downstream port errors of Restricted CXL Hosts (RCHs).
[1] CXL 3.0 Spec, 12.2.1.1 - RCH Downstream Port Detected Errors
[2] PCIe Base Spec r6.0, 7.8.4.3 Uncorrectable Error Mask Register,
7.8.4.6 Correctable Error Mask Register
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-19-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
In Restricted CXL Device (RCD) mode a CXL device is exposed as an
RCiEP, but CXL downstream and upstream ports are not enumerated and
not visible in the PCIe hierarchy. [1] Protocol and link errors from
these non-enumerated ports are signaled as internal AER errors, either
Uncorrectable Internal Error (UIE) or Corrected Internal Errors (CIE)
via an RCEC.
Restricted CXL host (RCH) downstream port-detected errors have the
Requester ID of the RCEC set in the RCEC's AER Error Source ID
register. A CXL handler must then inspect the error status in various
CXL registers residing in the dport's component register space (CXL
RAS capability) or the dport's RCRB (PCIe AER extended
capability). [2]
Errors showing up in the RCEC's error handler must be handled and
connected to the CXL subsystem. Implement this by forwarding the error
to all CXL devices below the RCEC. Since the entire CXL device is
controlled only using PCIe Configuration Space of device 0, function
0, only pass it there [3]. The error handling is limited to currently
supported devices with the Memory Device class code set (CXL Type 3
Device, PCI_CLASS_MEMORY_CXL, 502h), handle downstream port errors in
the device's cxl_pci driver. Support for other CXL Device Types
(e.g. a CXL.cache Device) can be added later.
To handle downstream port errors in addition to errors directed to the
CXL endpoint device, a handler must also inspect the CXL RAS and PCIe
AER capabilities of the CXL downstream port the device is connected
to.
Since CXL downstream port errors are signaled using internal errors,
the handler requires those errors to be unmasked. This is subject of a
follow-on patch.
The reason for choosing this implementation is that the AER service
driver claims the RCEC device, but does not allow it to register a
custom specific handler to support CXL. Connecting the RCEC hard-wired
with a CXL handler does not work, as the CXL subsystem might not be
present all the time. The alternative to add an implementation to the
portdrv to allow the registration of a custom RCEC error handler isn't
worth doing it as CXL would be its only user. Instead, just check for
an CXL RCEC and pass it down to the connected CXL device's error
handler. With this approach the code can entirely be implemented in
the PCIe AER driver and is independent of the CXL subsystem. The CXL
driver only provides the handler.
[1] CXL 3.0 spec: 9.11.8 CXL Devices Attached to an RCH
[2] CXL 3.0 spec, 12.2.1.1 RCH Downstream Port-detected Errors
[3] CXL 3.0 spec, 8.1.3 PCIe DVSEC for CXL Devices
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-pci@vger.kernel.org
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-18-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The RCH root port contains root command AER registers that should not be
enabled.[1] Disable these to prevent root port interrupts.
[1] CXL 3.0 - 12.2.1.1 RCH Downstream Port-detected Errors
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-17-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
RCH downstream port error logging is missing in the current CXL driver. The
missing AER and RAS error logging is needed for communicating driver error
details to userspace. Update the driver to include PCIe AER and CXL RAS
error logging.
Add RCH downstream port error handling into the existing RCiEP handler.
The downstream port error handler is added to the RCiEP error handler
because the downstream port is implemented in a RCRB, is not PCI
enumerable, and as a result is not directly accessible to the PCI AER
root port driver. The AER root port driver calls the RCiEP handler for
handling RCD errors and RCH downstream port protocol errors.
Update existing RCiEP correctable and uncorrectable handlers to also call
the RCH handler. The RCH handler will read the RCH AER registers, check for
error severity, and if an error exists will log using an existing kernel
AER trace routine. The RCH handler will also log downstream port RAS errors
if they exist.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-16-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The restricted CXL host (RCH) error handler will log protocol errors
using AER and RAS status registers. The AER and RAS registers need to
be virtually memory mapped before enabling interrupts. Create the
initializer function devm_cxl_setup_parent_dport() for this when the
endpoint is connected with the dport. The initialization sets up the
RCH RAS and AER mappings.
Add 'struct cxl_regs' to 'struct cxl_dport' for saving a pointer to
the RCH downstream port's AER and RAS registers.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-15-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL error handler currently only logs endpoint RAS status. The CXL
topology includes several components providing RAS details to be logged
during error handling.[1] Update the current handler's RAS logging to use a
RAS register address. Also, update the error handler function names to be
consistent with correctable and uncorrectable RAS. This will allow for
adding support to log other CXL component's RAS details in the future.
[1] CXL3.0 Table 8-22 CXL_Capability_ID Assignment
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-14-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The CXL driver plans to use cper_print_aer() for logging restricted CXL
host (RCH) AER errors. cper_print_aer() is not currently exported and
therefore not usable by the CXL drivers built as loadable modules. Export
the cper_print_aer() function. Use the EXPORT_SYMBOL_NS_GPL() variant
to restrict the export to CXL drivers.
The CONFIG_ACPI_APEI_PCIEAER kernel config is currently used to enable
cper_print_aer(). cper_print_aer() logs the AER registers and is
useful in PCIE AER logging outside of APEI. Remove the
CONFIG_ACPI_APEI_PCIEAER dependency to enable cper_print_aer().
The cper_print_aer() function name implies CPER specific use but is useful
in non-CPER cases as well. Rename cper_print_aer() to pci_print_aer().
Also, update cxl_core to import CXL namespace imports.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Cc: Mahesh J Salgaonkar <mahesh@linux.ibm.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-13-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Restricted CXL host (RCH) downstream port AER information is not currently
logged while in the error state. One problem preventing the error logging
is the AER and RAS registers are not accessible. The CXL driver requires
changes to find RCH downstream port AER and RAS registers for purpose of
error logging.
RCH downstream ports are not enumerated during a PCI bus scan and are
instead discovered using system firmware, ACPI in this case.[1] The
downstream port is implemented as a Root Complex Register Block (RCRB).
The RCRB is a 4k memory block containing PCIe registers based on the PCIe
root port.[2] The RCRB includes AER extended capability registers used for
reporting errors. Note, the RCH's AER Capability is located in the RCRB
memory space instead of PCI configuration space, thus its register access
is different. Existing kernel PCIe AER functions can not be used to manage
the downstream port AER capabilities and RAS registers because the port was
not enumerated during PCI scan and the registers are not PCI config
accessible.
Discover RCH downstream port AER extended capability registers. Use MMIO
accesses to search for extended AER capability in RCRB register space.
[1] CXL 3.0 Spec, 9.11.2 - System Firmware View of CXL 1.1 Hierarchy
[2] CXL 3.0 Spec, 8.2.1.1 - RCH Downstream Port RCRB
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-12-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The Component Register base address @component_reg_phys is no longer
used after the rework of the Component Register setup which now uses
struct member @reg_map instead. Remove the base address.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-10-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The Component Register base address @component_reg_phys is no longer
used after the rework of the Component Register setup which now uses
struct member @reg_map instead. Remove the base address.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-9-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Now, that the Component Register mappings are stored, use them to
enable and map the HDM decoder capabilities. The Component Registers
do not need to be probed again for this, remove probing code.
The HDM capability applies to Endpoints, USPs and VH Host Bridges. The
Endpoint's component register mappings are located in the cxlds and
else in the port's structure. Duplicate the cxlds->reg_map in
port->reg_map for endpoint ports.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
[rework to drop cxl_port_get_comp_map()]
Link: https://lore.kernel.org/r/20231018171713.1883517-8-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
cxl_dev_state
Same as for ports and dports, also store the endpoint's Component
Register mappings, use struct cxl_dev_state for that.
Keep the Component Register base address @component_reg_phys a bit to
not break functionality. It will be removed after the transition in a
later patch.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-7-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The component registers of a component may not exist and
cxl_setup_comp_regs() will fail for that reason. In another case,
Software may not use and set those registers up. cxl_setup_comp_regs()
is then called with a base address of CXL_RESOURCE_NONE. Both are
valid cases, but the function returns without initializing the
register map.
Now, a missing component register block is not necessarily a reason to
fail (feature is optional or its existence checked later). Change
cxl_setup_comp_regs() to also use components with the component
register block missing. Thus, always initialize struct
cxl_register_map with valid values, set @dev and make @resource
CXL_RESOURCE_NONE.
The change is in preparation of follow-on patches.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-6-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Name the field @reg_map, because @reg_map->host will be used for
mapping operations beyond component registers (i.e. AER registers).
This is valid for all occurrences of @comp_map. Change them all.
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-5-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
commit 5d2ffbe4b81a ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
...moved the dport component registers from a raw component_reg_phys
passed in at dport instantiation time to a 'struct cxl_register_map'
populated with both the component register data *and* the "host" device
for mapping operations.
While typical CXL switch dports are mapped by their associated 'struct
cxl_port', an RCH host bridge dport registered by cxl_acpi needs to wait
until the cxl_mem driver makes the attachment to map the registers. This
is because there are no intervening 'struct cxl_port' instances between
the root cxl_port and the endpoint port in an RCH topology.
For now just mark the host as NULL in the RCH dport case until code that
needs to map the dport registers arrives.
This patch is not flagged for -stable since nothing in the current
driver uses the dport->comp_map.
Now, I am slightly uneasy that cxl_setup_comp_regs() sets map->host to a
wrong value and then cxl_dport_setup_regs() fixes it up, but the
alternatives I came up with are more messy. For example, adding an
@logdev to 'struct cxl_register_map' that the dev_printk()s can fall
back to when @host is NULL. I settled on "post-fixup+comment" since it
is only RCH dports that have this special case where register probing is
split between a host-bridge RCRB lookup and when cxl_mem_probe() does
the association of the cxl_memdev and endpoint port.
[moved rename of @comp_map to @reg_map into next patch]
Fixes: 5d2ffbe4b81a ("cxl/port: Store the downstream port's Component Register mappings in struct cxl_dport")
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-4-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The primary role of @dev is to host the mappings for devm operations.
@dev is too ambiguous as a name. I.e. when does @dev refer to the
'struct device *' instance that the registers belong, and when does
@dev refer to the 'struct device *' instance hosting the mapping for
devm operations?
Clarify the role of @dev in cxl_register_map by renaming it to @host.
Also, rename local variables to 'host' where map->host is used.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-3-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Both cros host command and irq disable were moved to suspend
prepare stage from late suspend recently. This is causing EC
to report MKBP event timeouts during suspend stress testing.
When the MKBP event timeouts happen during suspend, subsequent
wakeup of AP by EC using MKBP doesn't happen properly. Move the
irq disabling part back to late suspend stage which is a general
suggestion from the suspend kernel documentaiton to do irq
disable as late as possible.
Fixes: 4b9abbc132b8 ("platform/chrome: cros_ec_lpc: Move host command to prepare/complete")
Signed-off-by: Lalith Rajendran <lalithkraj@chromium.org>
Link: https://lore.kernel.org/r/20231027160221.v4.1.I1725c3ed27eb7cd9836904e49e8bfa9fb0200a97@changeid
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
The CXL subsystem, at cxl_mem ->probe() time, establishes a lineage of
ports (struct cxl_port objects) between an endpoint and the root of a
CXL topology. Each port including the endpoint port is attached to the
cxl_port driver.
Given that setup, it follows that when either any port in that lineage
goes through a cxl_port ->remove() event, or the memdev goes through a
cxl_mem ->remove() event. The hierarchy below the removed port, or the
entire hierarchy if the memdev is removed needs to come down.
The delete_endpoint() callback is careful to check whether it is being
called to tear down the hierarchy, or if it is only being called to
teardown the memdev because an ancestor port is going through
->remove().
That care needs to take the device_lock() of the endpoint's parent.
Which requires 2 bugs to be fixed:
1/ A reference on the parent is needed to prevent use-after-free
scenarios like this signature:
BUG: spinlock bad magic on CPU#0, kworker/u56:0/11
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc38 05/24/2023
Workqueue: cxl_port detach_memdev [cxl_core]
RIP: 0010:spin_bug+0x65/0xa0
Call Trace:
do_raw_spin_lock+0x69/0xa0
__mutex_lock+0x695/0xb80
delete_endpoint+0xad/0x150 [cxl_core]
devres_release_all+0xb8/0x110
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1d2/0x210
detach_memdev+0x15/0x20 [cxl_core]
process_one_work+0x1e3/0x4c0
worker_thread+0x1dd/0x3d0
2/ In the case of RCH topologies, the parent device that needs to be
locked is not always @port->dev as returned by cxl_mem_find_port(), use
endpoint->dev.parent instead.
Fixes: 8dd2bc0f8e02 ("cxl/mem: Add the cxl_mem driver")
Cc: <stable@vger.kernel.org>
Reported-by: Robert Richter <rrichter@amd.com>
Closes: http://lore.kernel.org/r/20231018171713.1883517-2-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Three fixes, one for the clk framework and two for clk drivers:
- Avoid an oops in possible_parent_show() by checking for no parent
properly when a DT index based lookup is used
- Handle errors returned from divider_ro_round_rate() in
clk_stm32_composite_determine_rate()
- Fix clk_ops::determine_rate() implementation of socfpga's
gateclk_ops that was ruining uart output because the divider
was forgotten about"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate()
clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name
clk: socfpga: gate: Account for the divider in determine_rate
|
|
Pull misc filesystem fixes from Al Viro:
"Assorted fixes all over the place: literally nothing in common, could
have been three separate pull requests.
All are simple regression fixes, but not for anything from this cycle"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock
io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed
sparc32: fix a braino in fault handling in csum_and_copy_..._user()
|
|
While building on a wide range of distros and clang versions it was
noticed that at least version 12.0.1 (noticed on Alpine 3.15 with
"Alpine clang version 12.0.1") is needed to not fail with BTF generation
errors such as:
Debian:10
Debian clang version 11.0.1-2~deb10u1:
CLANG /tmp/build/perf/util/bpf_skel/.tmp/sample_filter.bpf.o
<SNIP>
GENSKEL /tmp/build/perf/util/bpf_skel/sample_filter.skel.h
libbpf: failed to find BTF for extern 'bpf_cast_to_kern_ctx' [21] section: -2
Error: failed to open BPF object file: No such file or directory
make[2]: *** [Makefile.perf:1121: /tmp/build/perf/util/bpf_skel/sample_filter.skel.h] Error 254
make[2]: *** Deleting file '/tmp/build/perf/util/bpf_skel/sample_filter.skel.h'
Amazon Linux 2:
clang version 11.1.0 (Amazon Linux 2 11.1.0-1.amzn2.0.2)
GENSKEL /tmp/build/perf/util/bpf_skel/sample_filter.skel.h
libbpf: elf: skipping unrecognized data section(18) .eh_frame
libbpf: elf: skipping relo section(19) .rel.eh_frame for section(18) .eh_frame
libbpf: failed to find BTF for extern 'bpf_cast_to_kern_ctx' [21] section: -2
Error: failed to open BPF object file: No such file or directory
make[2]: *** [/tmp/build/perf/util/bpf_skel/sample_filter.skel.h] Error 254
make[2]: *** Deleting file `/tmp/build/perf/util/bpf_skel/sample_filter.skel.h'
Ubuntu 20.04:
clang version 10.0.0-4ubuntu1
CLANG /tmp/build/perf/util/bpf_skel/.tmp/augmented_raw_syscalls.bpf.o
GENSKEL /tmp/build/perf/util/bpf_skel/bench_uprobe.skel.h
GENSKEL /tmp/build/perf/util/bpf_skel/bperf_leader.skel.h
libbpf: sec '.reluprobe': corrupted symbol #27 pointing to invalid section #65522 for relo #0
GENSKEL /tmp/build/perf/util/bpf_skel/bperf_follower.skel.h
Error: failed to open BPF object file: BPF object format invalid
make[2]: *** [Makefile.perf:1121: /tmp/build/perf/util/bpf_skel/bench_uprobe.skel.h] Error 95
make[2]: *** Deleting file '/tmp/build/perf/util/bpf_skel/bench_uprobe.skel.h'
So check if the version is at least 12.0.1 otherwise disable building
BPF skels and provide a message about it, continuing the build.
The message, when running on amazonlinux:2:
Makefile.config:698: Warning: Disabled BPF skeletons as reliable BTF generation needs at least clang version 12.0.1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/ZTvGx/Ou6BVnYBqi@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There are a couple of spelling mistakes in perror messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20231027084633.1167530-1-colin.i.king@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There is a spelling mistake in a ui error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lore.kernel.org/r/20231027084011.1167091-1-colin.i.king@gmail.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
evsel__increase_rlimit()
The changes in ("perf evsel: Rename evsel__increase_rlimit to
rlimit__increase_nofile") ended up breaking the python binding that now
references the rlimit__increase_nofile function, add the util/rlimit.o
to the tools/perf/util/python-ext-sources to cure that.
This was detected by the 'perf test python' regression test:
$ perf test python
14: 'import perf' in python : FAILED!
$ perf test -v python
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
14: 'import perf' in python :
--- start ---
test child forked, pid 2912462
python usage test: "echo "import sys ; sys.path.insert(0, '/tmp/build/perf-tools-next/python'); import perf" | '/usr/bin/python3' "
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: /tmp/build/perf-tools-next/python/perf.cpython-311-x86_64-linux-gnu.so: undefined symbol: rlimit__increase_nofile
test child finished with -1
---- end ----
'import perf' in python: FAILED!
$
Fixes: e093a222d7cba1eb ("perf evsel: Rename evsel__increase_rlimit to rlimit__increase_nofile")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/lkml/ZTrCS5Z3PZAmfPdV@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The clk gate kunit test checks that the implementation of the basic clk
gate reads and writes the proper bits in an MMIO register. The
implementation of the basic clk gate type uses writel() and readl()
which operate on little-endian registers. This test fails on big-endian
CPUs because the clk gate implementation writes to 'fake_reg' with
writel(), which converts the value to be written to little-endian before
storing the value in the fake register. When the test checks the bits in
the fake register on a big-endian machine it falsely assumes the format
of the register is also big-endian, when it is really always
little-endian. Suffice to say things don't work very well.
Mark 'fake_reg' as __le32 and push through endian accessor fixes
wherever the value is inspected to make this test endian agnostic.
There's a CLK_GATE_BIG_ENDIAN flag for big-endian MMIO devices, which
this test isn't using. A follow-up patch will test with and without that
flag.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Closes: https://lore.kernel.org/r/ZTLH5o0GlFBYsAHq@boqun-archlinux
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231027225821.95833-1-sboyd@kernel.org
|
|
Recent changes to count number of matching symbols when creating
a kprobe event failed to take into account kernel modules. As such, it
breaks kprobes on kernel module symbols, by assuming there is no match.
Fix this my calling module_kallsyms_on_each_symbol() in addition to
kallsyms_on_each_match_symbol() to perform a proper counting.
Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/
Cc: Francis Laniel <flaniel@linux.microsoft.com>
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Fixes: b022f0c7e404 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Use of dget() after we'd dropped ->d_lock is too late - dentry might
be gone by that point.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
failed
->ki_pos value is unreliable in such cases. For an obvious example,
consider O_DSYNC write - we feed the data to page cache and start IO,
then we make sure it's completed. Update of ->ki_pos is dealt with
by the first part; failure in the second ends up with negative value
returned _and_ ->ki_pos left advanced as if sync had been successful.
In the same situation write(2) does not advance the file position
at all.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull io_uring fixes from Jens Axboe:
"Fix for an issue reported where reading fdinfo could find a NULL
thread as we didn't properly synchronize, and then a disable for the
IOCB_DIO_CALLER_COMP optimization as a recent reported highlighted how
that could lead to deadlocks if the task issued async O_DIRECT writes
and then proceeded to do sync fallocate() calls"
* tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux:
io_uring/rw: disable IOCB_DIO_CALLER_COMP
io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
|
|
Fault handler used to make non-trivial calls, so it needed
to set a stack frame up. Used to be
save ... - grab a stack frame, old %o... become %i...
....
ret - go back to address originally in %o7, currently %i7
restore - switch to previous stack frame, in delay slot
Non-trivial calls had been gone since ab5e8b331244 and that code should
have become
retl - go back to address in %o7
clr %o0 - have return value set to 0
What it had become instead was
ret - go back to address in %i7 - return address of *caller*
clr %o0 - have return value set to 0
which is not good, to put it mildly - we forcibly return 0 from
csum_and_copy_{from,to}_iter() (which is what the call of that
thing had been inlined into) and do that without dropping the
stack frame of said csum_and_copy_..._iter(). Confuses the
hell out of the caller of csum_and_copy_..._iter(), obviously...
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: ab5e8b331244 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull block fix from Jens Axboe:
"Just a single fix for a potential divide-by-zero, introduced in this
cycle"
* tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux:
blk-throttle: check for overflow in calculate_bytes_allowed
|
