| Age | Commit message (Collapse) | Author |
|---|
|
In commit 892f7237b3ff ("arm64: Delay initialisation of
cpuinfo_arm64::reg_{zcr,smcr}") we moved access to ZCR, SMCR and SMIDR
later in the boot process in order to ensure that we don't attempt to
interact with them if SVE or SME is disabled on the command line.
Unfortunately when initialising the boot CPU in init_cpu_features() we work
on a copy of the struct cpuinfo_arm64 for the boot CPU used only during
boot, not the percpu copy used by the sysfs code. The expectation of the
feature identification code was that the ID registers would be read in
__cpuinfo_store_cpu() and the values not modified by init_cpu_features().
The main reason for the original change was to avoid early accesses to
ZCR on practical systems that were seen shipping with SVE reported in ID
registers but traps enabled at EL3 and handled as fatal errors, SME was
rolled in due to the similarity with SVE. Since then we have removed the
early accesses to ZCR and SMCR in commits:
abef0695f9665c3d ("arm64/sve: Remove ZCR pseudo register from cpufeature code")
391208485c3ad50f ("arm64/sve: Remove SMCR pseudo register from cpufeature code")
so only the SMIDR_EL1 part of the change remains. Since SMIDR_EL1 is
only trapped via FEAT_IDST and not the SME trap it is less likely to be
affected by similar issues, and the factors that lead to issues with SVE
are less likely to apply to SME.
Since we have not yet seen practical SME systems that need to use a
command line override (and are only just beginning to see SME systems at
all) and the ID register read is much more likely to be safe let's just
store SMIDR_EL1 along with all the other ID register reads in
__cpuinfo_store_cpu().
This issue wasn't apparent when testing on emulated platforms that do not
report values in SMIDR_EL1.
Fixes: 892f7237b3ff ("arm64: Delay initialisation of cpuinfo_arm64::reg_{zcr,smcr}")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241217-arm64-fix-boot-cpu-smidr-v3-1-7be278a85623@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When booting with a dock connected, the igc driver may get stuck for ~40
seconds if PCIe link is lost during initialization.
This happens because the driver access device after EECD register reads
return all F's, indicating failed reads. Consequently, hw->hw_addr is set
to NULL, which impacts subsequent rd32() reads. This leads to the driver
hanging in igc_get_hw_semaphore_i225(), as the invalid hw->hw_addr
prevents retrieving the expected value.
To address this, a validation check and a corresponding return value
catch is added for the EECD register read result. If all F's are
returned, indicating PCIe link loss, the driver will return -ENXIO
immediately. This avoids the 40-second hang and significantly improves
boot time when using a dock with an igc NIC.
Log before the patch:
[ 0.911913] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 0.912386] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.571098] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 43.449095] igc_get_hw_semaphore_i225: igc 0000:70:00.0 (unnamed net_device) (uninitialized): Driver can't access device - SMBI bit is set.
[ 43.449186] igc 0000:70:00.0: probe with driver igc failed with error -13
[ 46.345701] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 46.345777] igc 0000:70:00.0: PTM enabled, 4ns granularity
Log after the patch:
[ 1.031000] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 1.032097] igc 0000:70:00.0: PTM enabled, 4ns granularity
[ 1.642291] igc 0000:70:00.0 (unnamed net_device) (uninitialized): PCIe link lost, device now detached
[ 5.480490] igc 0000:70:00.0: enabling device (0000 -> 0002)
[ 5.480516] igc 0000:70:00.0: PTM enabled, 4ns granularity
Fixes: ab4056126813 ("igc: Add NVM support")
Cc: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
ptp4l application reports too high offset when ran on E823 device
with a 100GB/s link. Those values cannot go under 100ns, like in a
working case when using 100 GB/s cable.
This is due to incorrect frequency settings on the PHY clocks for
100 GB/s speed. Changes are introduced to align with the internal
hardware documentation, and correctly initialize frequency in PHY
clocks with the frequency values that are in our HW spec.
To reproduce the issue run ptp4l as a Time Receiver on E823 device,
and observe the offset, which will never approach values seen
in the PTP working case.
Reproduction output:
ptp4l -i enp137s0f3 -m -2 -s -f /etc/ptp4l_8275.conf
ptp4l[5278.775]: master offset 12470 s2 freq +41288 path delay -3002
ptp4l[5278.837]: master offset 10525 s2 freq +39202 path delay -3002
ptp4l[5278.900]: master offset -24840 s2 freq -20130 path delay -3002
ptp4l[5278.963]: master offset 10597 s2 freq +37908 path delay -3002
ptp4l[5279.025]: master offset 8883 s2 freq +36031 path delay -3002
ptp4l[5279.088]: master offset 7267 s2 freq +34151 path delay -3002
ptp4l[5279.150]: master offset 5771 s2 freq +32316 path delay -3002
ptp4l[5279.213]: master offset 4388 s2 freq +30526 path delay -3002
ptp4l[5279.275]: master offset -30434 s2 freq -28485 path delay -3002
ptp4l[5279.338]: master offset -28041 s2 freq -27412 path delay -3002
ptp4l[5279.400]: master offset 7870 s2 freq +31118 path delay -3002
Fixes: 3a7496234d17 ("ice: implement basic E822 PTP support")
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Mask admin command returned max phase adjust value for both input and
output pins. Only 31 bits are relevant, last released data sheet wrongly
points that 32 bits are valid - see [1] 3.2.6.4.1 Get CCU Capabilities
Command for reference. Fix of the datasheet itself is in progress.
Fix the min/max assignment logic, previously the value was wrongly
considered as negative value due to most significant bit being set.
Example of previous broken behavior:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
Correct behavior with the fix:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":1}'| grep phase-adjust
'phase-adjust': 0,
'phase-adjust-max': 2147466925,
'phase-adjust-min': -2147466925,
[1] https://cdrdv2.intel.com/v1/dl/getContent/613875?explicitVersion=true
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During fuzz testing, the following warning was discovered:
different return values (15 and 11) from vsnprintf("%*pbl
", ...)
test:keyward is WARNING in kvasprintf
WARNING: CPU: 55 PID: 1168477 at lib/kasprintf.c:30 kvasprintf+0x121/0x130
Call Trace:
kvasprintf+0x121/0x130
kasprintf+0xa6/0xe0
bitmap_print_to_buf+0x89/0x100
core_siblings_list_read+0x7e/0xb0
kernfs_file_read_iter+0x15b/0x270
new_sync_read+0x153/0x260
vfs_read+0x215/0x290
ksys_read+0xb9/0x160
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
The call trace shows that kvasprintf() reported this warning during the
printing of core_siblings_list. kvasprintf() has several steps:
(1) First, calculate the length of the resulting formatted string.
(2) Allocate a buffer based on the returned length.
(3) Then, perform the actual string formatting.
(4) Check whether the lengths of the formatted strings returned in
steps (1) and (2) are consistent.
If the core_cpumask is modified between steps (1) and (3), the lengths
obtained in these two steps may not match. Indeed our test includes cpu
hotplugging, which should modify core_cpumask while printing.
To fix this issue, cache the cpumask into a temporary variable before
calling cpumap_print_{list, cpumask}_to_buf(), to keep it unchanged
during the printing process.
Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI")
Cc: stable <stable@kernel.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20241114110141.94725-1-lihuafei1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 2045a3b8911b ("mm/sparse-vmemmap: generalise vmemmap_populate_hugepages()")
introduces the vmemmap_check_pmd() while does not verify if the entry is a
section mapping, as is already done for Loongarch & X86.
The update includes a check for pmd_sect(). Only if pmd_sect() returns true,
further vmemmap population for the addr is skipped.
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20250102074047.674156-1-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
[pgd|p4d]_bad() helpers have open encodings for their respective table bits
which can be replaced with corresponding macros. This makes things clearer,
thus improving their readability as well.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20250107015529.798319-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
pte_present() is no longer synonymous with pte_valid() as it also tests for
pte_present_invalid() as well. Hence pte_mkpresent() is misleading, because
all that does is make an entry mapped, via setting PTE_VALID. Hence rename
the helper as pte_mkvalid() which reflects its functionality appropriately.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250107023016.829416-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In some scenarios, some multipath software setup places the
REQ_FAILFAST_DEV flag on I/O to prevent retries and immediately
switch to other paths for issuing I/O commands. This will reflect
on the NVMe read and write commands with the limited retry flag.
However, the current NVMe target side does not handle the limited
retry flag, and the target's underlying driver still retries the
I/O. This will result in the I/O not being quickly switched to
other paths, ultimately leading to increased I/O latency.
When the nvme target receive an rw command with limited retry flag,
handle it in block backend by setting the REQ_FAILFAST_DEV flag to
bio.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Fixup the uc_attr_mem_limit test case to also cover the
KVM_HAS_DEVICE_ATTR ioctl.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-7-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-7-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a selftests for the interrupt routing configuration when using
ucontrol VMs.
Calling the test may trigger a null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-5-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-5-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Prevent null pointer dereference when processing
KVM_IRQ_ROUTING_S390_ADAPTER routing entries.
The ioctl cannot be processed for ucontrol VMs.
Fixes: f65470661f36 ("KVM: s390/interrupt: do not pin adapter interrupt pages")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-4-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-4-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some superficial selftests for the floating interrupt controller
when using ucontrol VMs. These tests are intended to cover very basic
calls only.
Some of the calls may trigger null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-3-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-3-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Prevent null pointer dereference when processing the
KVM_DEV_FLIC_APF_ENABLE and KVM_DEV_FLIC_APF_DISABLE_WAIT ioctls in the
interrupt controller.
Fixes: 3c038e6be0e2 ("KVM: async_pf: Async page fault support on s390")
Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-2-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-2-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
In commit 77b533411595 ("KVM: s390: VSIE: sort out virtual/physical
address in pin_guest_page"), only pin_scb() has been updated. This
means that in unpin_scb() a virtual address was still used directly as
physical address without conversion. The resulting physical address is
obviously wrong and most of the time also invalid.
Since commit d0ef8d9fbebe ("KVM: s390: Use kvm_release_page_dirty() to
unpin "struct page" memory"), unpin_guest_page() will directly use
kvm_release_page_dirty(), instead of kvm_release_pfn_dirty(), which has
since been removed.
One of the checks that were performed by kvm_release_pfn_dirty() was to
verify whether the page was valid at all, and silently return
successfully without doing anything if the page was invalid.
When kvm_release_pfn_dirty() was still used, the invalid page was thus
silently ignored. Now the check is gone and the result is an Oops.
This also means that when running with a V!=R kernel, the page was not
released, causing a leak.
The solution is simply to add the missing virt_to_phys().
Fixes: 77b533411595 ("KVM: s390: VSIE: sort out virtual/physical address in pin_guest_page")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20241210083948.23963-1-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20241210083948.23963-1-imbrenda@linux.ibm.com>
|
|
In pmc_core_ssram_get_pmc(), the physical addresses for hidden SSRAM
devices are retrieved from the MMIO region of the primary SSRAM device.
If additional devices are not present, the address returned is zero.
Currently, the code does not check for this condition, resulting in
ioremap() incorrectly attempting to map address 0.
Add a check for a zero address and return 0 if no additional devices
are found, as it is not an error for the device to be absent.
Fixes: a01486dc4bb1 ("platform/x86/intel/pmc: Cleanup SSRAM discovery")
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250106174653.1497128-1-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Clearwater Forest (INTEL_ATOM_DARKMONT_X) to SST support list by
adding to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add Clearwater Forest support (INTEL_ATOM_DARKMONT_X) to tpmi_cpu_ids
to support domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250103155255.1488139-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
we need that in ->real_fops == NULL, ->short_fops != NULL case
Fixes: 8dc6d81c6b2a "debugfs: add small file operations for most files"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20241229081223.3193228-1-viro@zeniv.linux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Geert reported that my previous short fops debugfs changes
broke m68k, because it only has mandatory alignement of two,
so we can't stash the "is it short" information into the
pointer (as we already did with the "is it real" bit.)
Instead, exploit the fact that debugfs_file_get() called on
an already open file will already find that the fsdata is
no longer the real fops but rather the allocated data that
already distinguishes full/short ops, so only open() needs
to be able to distinguish. We can achieve that by using two
different open functions.
Unfortunately this requires another set of full file ops,
increasing the size by 536 bytes (x86-64), but that's still
a reasonable trade-off given that only converting some of
the wireless stack gained over 28k. This brings the total
cost of this to around 1k, for wins of 28k (all x86-64).
Reported-and-tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/CAMuHMdWu_9-L2Te101w8hU7H_2yobJFPXSwwUmGHSJfaPWDKiQ@mail.gmail.com
Fixes: 8dc6d81c6b2a ("debugfs: add small file operations for most files")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20241129121536.30989-2-johannes@sipsolutions.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DDI0601 2024-09 introduces new features which are enumerated via
ID_AA64ISAR2_EL1, update the sysreg file to reflect these updates.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-6-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 introduces SVE 2.2 as well as a few new optional features,
update sysreg to reflect the changes in ID_AA64ZFR0_EL1 enumerating them.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-4-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 defines two new feature flags in ID_AA64FPFR0_EL1
describing new FP8 operations, describe them in sysreg.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-3-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 defines several new feature flags in ID_AA64ISAR3_EL1,
update our description in sysreg to reflect these.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-2-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
DDI0601 2024-09 defines a new feature flags in ID_AA64PFR2_EL1
describing support for injecting UNDEF exceptions, update sysreg to
include this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241211-arm64-2024-dpisa-v4-1-0fd403876df2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that VirtualBox is able to run as a host on arm64 (e.g. the Apple M3
processors) we can enable VBOXSF_FS (and in turn VBOXGUEST) for this
architecture. Tested with various runs of bonnie++ and dbench on an Apple
MacBook Pro with the latest Virtualbox 7.1.4 r165100 installed.
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
Link: https://lore.kernel.org/r/7384d96c-2a77-39b0-2306-90129bae9342@nerdbynature.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The kafs filesystem limits the maximum length of a cell to 256 bytes, but a
problem occurs if someone actually does that: kafs tries to create a
directory under /proc/net/afs/ with the name of the cell, but that fails
with a warning:
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405
because procfs limits the maximum filename length to 255.
However, the DNS limits the maximum lookup length and, by extension, the
maximum cell name, to 255 less two (length count and trailing NUL).
Fix this by limiting the maximum acceptable cellname length to 253. This
also allows us to be sure we can create the "/afs/.<cell>/" mountpoint too.
Further, split the YFS VL record cell name maximum to be the 256 allowed by
the protocol and ignore the record retrieved by YFSVL.GetCellName if it
exceeds 253.
Fixes: c3e9f888263b ("afs: Implement client support for the YFSVL.GetCellName RPC op")
Reported-by: syzbot+7848fee1f1e5c53f912b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/6776d25d.050a0220.3a8527.0048.GAE@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/376236.1736180460@warthog.procyon.org.uk
Tested-by: syzbot+7848fee1f1e5c53f912b@syzkaller.appspotmail.com
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Macbook 5,1 with MCP79 lost its backlight control since the recent
change for supporting GSP-RM; it rewrote the whole nv50 backlight
control code and each display engine is supposed to have an entry for
IOR bl callback, but it didn't cover mcp77.
This patch adds the missing bl entry initialization for mcp77 display
engine to recover the backlight control.
Fixes: 2274ce7e3681 ("drm/nouveau/disp: add output backlight control methods")
Cc: stable@vger.kernel.org
Link: https://bugzilla.suse.com/show_bug.cgi?id=1223838
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250102114944.11499-1-tiwai@suse.de
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi <mszeredi@redhat.com>:
- Fix fuse_get_user_pages() allocation failure handling.
- Fix direct-io folio offset and length calculation.
* tag 'fuse-fixes-6.13-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Set *nbytesp=0 in fuse_get_user_pages on allocation failure
fuse: fix direct io folio offset and length calculation
Link: https://lore.kernel.org/r/CAJfpegu7o_X%3DSBWk_C47dUVUQ1mJZDEGe1MfD0N3wVJoUBWdmg@mail.gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 79d2e1919a27 ("staging: gpib: fix Makefiles") uses the corresponding
config symbols to let Makefiles include the driver sources appropriately in
the kernel build.
Unfortunately, the Makefile in the tnt4882 directory refers to the
non-existing config GPIB_TNT4882. The actual config name for this driver is
GPIB_NI_PCI_ISA, as can be observed in the gpib Makefile.
Probably, this is caused by the subtle differences between the config
names, directory names and file names in ./drivers/staging/gpib/, where
often config names and directory names are identical or at least close in
naming, but in this case, it is not.
Change the reference in the tnt4882 Makefile from the non-existing config
GPIB_TNT4882 to the existing config GPIB_NI_PCI_ISA.
Fixes: 79d2e1919a27 ("staging: gpib: fix Makefiles")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20250107135032.34424-1-lukas.bulwahn@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If we kill a ring and then immediately exit the task, we'll get
cancellattion running by the task and a kthread in io_ring_exit_work.
For DEFER_TASKRUN, we do want to limit it to only one entity executing
it, however it's currently not an issue as it's protected by uring_lock.
Silence lockdep assertions for now, we'll return to it later.
Reported-by: syzbot+1bcb75613069ad4957fc@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7e5f68281acb0f081f65fde435833c68a3b7e02f.1736257837.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We use NAPI ID as the key for continuing dumps. We also depend
on the NAPIs being sorted by ID within the driver list. Tx NAPIs
(which don't have an ID assigned) break this expectation, it's
not currently possible to dump them reliably. Since Tx NAPIs
are relatively rare, and can't be used in doit (GET or SET)
hide them from the dump API as well.
Fixes: 27f91aaf49b3 ("netdev-genl: Add netlink framework functions for napi")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250103183207.1216004-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Anything selecting SND_SOC_WM8994 should also select MFD_WM8994, as
SND_SOC_WM8994 does not automatically do so. Add the missing selects.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501071530.UwIXs7OL-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250107104134.12147-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For 48Mhz MCLK systems the calculation of the HW rate is broken,
and will not produce even one sane rate. Since es83xx supports
the option to halve MCLK, calculate also rates with MCLK/2.
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://patch.msgid.link/20241227202751.244954-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASoC driver should not be used without the MFD component. This was
causing randconfig issues with regmap IRQ which is selected by the MFD
part of the wm8994 driver.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501061337.R0DlBUoD-lkp@intel.com/
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250106154639.3999553-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The root cause is that TAS2781 internal register is not unlocked
before writing data into TAS2781_PRM_TEST_57_REG.
Fixes: 49e2e353fb0d ("ASoC: tas2781: Add Calibration Kcontrols for Chromebook")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20241227074909.1974-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The error handling for the case `con_index == 0` should involve dropping
the pm usage counter, as ucsi_ccg_sync_control() gets it at the
beginning. Fix it.
Cc: stable <stable@kernel.org>
Fixes: e56aac6e5a25 ("usb: typec: fix potential array underflow in ucsi_ccg_sync_control()")
Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250107015750.2778646-1-gongruiqi1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This fixes data corruption when accessing the internal SD card in mass
storage mode.
I am actually not too sure why. I didn't figure a straightforward way to
reproduce the issue, but i seem to get garbage when issuing a lot (over 50)
of large reads (over 120 sectors) are done in a quick succession. That is,
time seems to matter here -- larger reads are fine if they are done with
some delay between them.
But I'm not great at understanding this sort of things, so I'll assume
the issue other, smarter, folks were seeing with similar phones is the
same problem and I'll just put my quirk next to theirs.
The "Software details" screen on the phone is as follows:
V 04.06
07-08-13
RM-849
(c) Nokia
TL;DR version of the device descriptor:
idVendor 0x0421 Nokia Mobile Phones
idProduct 0x06c2
bcdDevice 4.06
iManufacturer 1 Nokia
iProduct 2 Nokia 208
The patch assumes older firmwares are broken too (I'm unable to test, but
no biggie if they aren't I guess), and I have no idea if newer firmware
exists.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250101212206.2386207-1-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should do reverse selection of other components from
CONFIG_USB_F_MIDI2 which is tristate, instead of
CONFIG_USB_CONFIGFS_F_MIDI2 which is bool, for satisfying subtle
module dependencies.
Fixes: 8b645922b223 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250101131124.27599-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-5-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-4-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-3-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-2-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20241211-sysfs-const-bin_attr-s390-v1-1-be01f66bfcf7@weissschuh.net
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
During ARP failure, tid is not inserted but _c4iw_free_ep()
attempts to remove tid which results in error.
This patch fixes the issue by avoiding removal of uninserted tid.
Fixes: 59437d78f088 ("cxgb4/chtls: fix ULD connection failures due to wrong TID base")
Signed-off-by: Anumula Murali Mohan Reddy <anumula@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://patch.msgid.link/20250103092327.1011925-1-anumula@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Michael Chan says:
====================
bnxt_en: 2 Bug fixes
The first patch fixes a potential memory leak when sending a FW
message for the RoCE driver. The second patch fixes the potential
issue of DIM modifying the coalescing parameters of a ring that has
been freed.
====================
Link: https://patch.msgid.link/20250104043849.3482067-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DIM work will call the firmware to adjust the coalescing parameters on
the RX rings. We should cancel DIM work before we call the firmware
to free the RX rings. Otherwise, FW will reject the call from DIM
work if the RX ring has been freed. This will generate an error
message like this:
bnxt_en 0000:21:00.1 ens2f1np1: hwrm req_type 0x53 seq id 0x6fca error 0x2
and cause unnecessary concern for the user. It is also possible to
modify the coalescing parameters of the wrong ring if the ring has
been re-allocated.
To prevent this, cancel DIM work right before freeing the RX rings.
We also have to add a check in NAPI poll to not schedule DIM if the
RX rings are shutting down. Check that the VNIC is active before we
schedule DIM. The VNIC is always disabled before we free the RX rings.
Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown")
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250104043849.3482067-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When hwrm_req_replace() fails, the driver is not invoking bnxt_req_drop()
which could cause a memory leak.
Fixes: bbf33d1d9805 ("bnxt_en: update all firmware calls to use the new APIs")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250104043849.3482067-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add an array size limit to the for-loop to be sure we don't try
to reference a fw_version string off the end of the fw info names
array. We know that our firmware only has a limited number
of firmware slot names, but we shouldn't leave this unchecked.
Fixes: 45d76f492938 ("pds_core: set up device and adminq")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250103195147.7408-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
