summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-07clk: renesas: r9a06g032: Drop __packed for portabilityGeert Uytterhoeven
The R9A06G032 clock driver uses an array of packed structures to reduce kernel size. However, this array contains pointers, which are no longer aligned naturally, and cannot be relocated on PPC64. Hence when compile-testing this driver on PPC64 with CONFIG_RELOCATABLE=y (e.g. PowerPC allyesconfig), the following warnings are produced: WARNING: 136 bad relocations c000000000616be3 R_PPC64_UADDR64 .rodata+0x00000000000cf338 c000000000616bfe R_PPC64_UADDR64 .rodata+0x00000000000cf370 ... Fix this by dropping the __packed attribute from the r9a06g032_clkdesc definition, trading a small size increase for portability. This increases the 156-entry clock table by 1 byte per entry, but due to the compiler generating more efficient code for unpacked accesses, the net size increase is only 76 bytes (gcc 9.3.0 on arm32). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 4c3d88526eba2143 ("clk: renesas: Renesas R9A06G032 clock driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201130085743.1656317-1-geert+renesas@glider.be Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # PowerPC allyesconfig build Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07clk: imx: scu: fix MXC_CLK_SCU module build breakDong Aisheng
This issue can be reproduced by having a kernel config with CONFIG_IMX_MBOX=m and CONFIG_MXC_CLK_SCU=m. It's caused by the Makefile wanting to build clk-scu.o and clk-imx8qxp.o as different targets but that doesn't work (e.g. MXC_CLK_SCU = y while CLK_IMX8QXP = n) "obj-$(CONFIG_MXC_CLK_SCU) += clk-imx-scu.o clk-imx-lpcg-scu.o clk-imx-scu-$(CONFIG_CLK_IMX8QXP) += clk-scu.o clk-imx8qxp.o" Having MXC_CLK_SCU=y/m while CLK_IMX8QXP=n will cause a linker problem like below: LD [M] drivers/clk/imx/clk-imx-scu.o arm-poky-linux-gnueabi-ld: no input files Make MXC_CLK_SCU be un-selectable by users so it can only be selected by the CLK_IMX8QXP option, ensuring the two symbols are built together. Drop COMPILE_TEST too because this option isn't selectable anymore. We can remove it from MXC_CLK_SCU because CLK_IMX8QXP selects MXC_CLK_SCU which already has COMPILE_TEST. Fixes: e0d0d4d86c766 ("clk: imx8qxp: Support building i.MX8QXP clock driver as module") Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/20201130084624.21113-1-aisheng.dong@nxp.com [sboyd@kernel.org: Rework commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-07RDMA/core: Fix empty gid table for non IB/RoCE devicesGal Pressman
The query_gid_table ioctl skips non IB/RoCE ports, which as a result returns an empty gid table for devices such as EFA which have a GID table, but are not IB/RoCE. Fixes: c4b4d548fabc ("RDMA/core: Introduce new GID table query API") Link: https://lore.kernel.org/r/20201206153238.34878-1-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07x86/platform/uv: Update sysfs documentationMike Travis
Update sysfs documentation file to include moved /proc leaves. Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/20201128034227.120869-6-mike.travis@hpe.com
2020-12-07lwt_bpf: Replace preempt_disable() with migrate_disable()Cong Wang
migrate_disable() is just a wrapper for preempt_disable() in non-RT kernel. It is safe to replace it, and RT kernel will benefit. Note that it is introduced since Feb 2020. Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201205075946.497763-2-xiyou.wangcong@gmail.com
2020-12-07lwt: Disable BH too in run_lwt_bpf()Dongdong Wang
The per-cpu bpf_redirect_info is shared among all skb_do_redirect() and BPF redirect helpers. Callers on RX path are all in BH context, disabling preemption is not sufficient to prevent BH interruption. In production, we observed strange packet drops because of the race condition between LWT xmit and TC ingress, and we verified this issue is fixed after we disable BH. Although this bug was technically introduced from the beginning, that is commit 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure"), at that time call_rcu() had to be call_rcu_bh() to match the RCU context. So this patch may not work well before RCU flavor consolidation has been completed around v5.0. Update the comments above the code too, as call_rcu() is now BH friendly. Signed-off-by: Dongdong Wang <wangdongdong.6@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/bpf/20201205075946.497763-1-xiyou.wangcong@gmail.com
2020-12-07Merge tag 'trace-v5.10-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Fix userstacktrace option for instances While writing an application that requires user stack trace option to work in instances, I found that the instance option has a bug that makes it a nop. The check for performing the user stack trace in an instance, checks the top level options (not the instance options) to determine if a user stack trace should be performed or not. This is not only incorrect, but also confusing for users. It confused me for a bit!" * tag 'trace-v5.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix userstacktrace option for instances
2020-12-07clocksource/drivers/sh_cmt: Fix potential deadlock when calling runtime PMNiklas Söderlund
The ch->lock is used to protect the whole enable() and read() of sh_cmt's implementation of struct clocksource. The enable() implementation calls pm_runtime_get_sync() which may result in the clock source to be read() triggering a cyclic lockdep warning for the ch->lock. The sh_cmt driver implement its own balancing of calls to sh_cmt_{enable,disable}() with flags in sh_cmt_{start,stop}(). It does this to deal with that start and stop are shared between the clock source and clock event providers. While this could be improved on verifying corner cases based on any substantial rework on all devices this driver supports might prove hard. As a first step separate the PM handling for clock event and clock source. Always put/get the device when enabling/disabling the clock source but keep the clock event logic unchanged. This allows the sh_cmt implementation of struct clocksource to call PM without holding the ch->lock and avoiding the deadlock. Triggering and log of the deadlock warning, # echo e60f0000.timer > /sys/devices/system/clocksource/clocksource0/current_clocksource [ 46.948370] ====================================================== [ 46.954730] WARNING: possible circular locking dependency detected [ 46.961094] 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 Not tainted [ 46.967985] ------------------------------------------------------ [ 46.974342] migration/0/11 is trying to acquire lock: [ 46.979543] ffff0000403ed220 (&dev->power.lock){-...}-{2:2}, at: __pm_runtime_resume+0x40/0x74 [ 46.988445] [ 46.988445] but task is already holding lock: [ 46.994441] ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.002173] [ 47.002173] which lock already depends on the new lock. [ 47.002173] [ 47.010573] [ 47.010573] the existing dependency chain (in reverse order) is: [ 47.018262] [ 47.018262] -> #3 (&ch->lock){....}-{2:2}: [ 47.024033] lock_acquire.part.0+0x120/0x330 [ 47.028970] lock_acquire+0x64/0x80 [ 47.033105] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.038130] sh_cmt_start+0x28/0x210 [ 47.042352] sh_cmt_clocksource_enable+0x28/0x50 [ 47.047644] change_clocksource+0x9c/0x160 [ 47.052402] multi_cpu_stop+0xa4/0x190 [ 47.056799] cpu_stopper_thread+0x90/0x154 [ 47.061557] smpboot_thread_fn+0x244/0x270 [ 47.066310] kthread+0x154/0x160 [ 47.070175] ret_from_fork+0x10/0x20 [ 47.074390] [ 47.074390] -> #2 (tk_core.seq.seqcount){----}-{0:0}: [ 47.081136] lock_acquire.part.0+0x120/0x330 [ 47.086070] lock_acquire+0x64/0x80 [ 47.090203] seqcount_lockdep_reader_access.constprop.0+0x74/0x100 [ 47.097096] ktime_get+0x28/0xa0 [ 47.100960] hrtimer_start_range_ns+0x210/0x2dc [ 47.106164] generic_sched_clock_init+0x70/0x88 [ 47.111364] sched_clock_init+0x40/0x64 [ 47.115853] start_kernel+0x494/0x524 [ 47.120156] [ 47.120156] -> #1 (hrtimer_bases.lock){-.-.}-{2:2}: [ 47.126721] lock_acquire.part.0+0x120/0x330 [ 47.136042] lock_acquire+0x64/0x80 [ 47.144461] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.153721] hrtimer_start_range_ns+0x68/0x2dc [ 47.163054] rpm_suspend+0x308/0x5dc [ 47.171473] rpm_idle+0xc4/0x2a4 [ 47.179550] pm_runtime_work+0x98/0xc0 [ 47.188209] process_one_work+0x294/0x6f0 [ 47.197142] worker_thread+0x70/0x45c [ 47.205661] kthread+0x154/0x160 [ 47.213673] ret_from_fork+0x10/0x20 [ 47.221957] [ 47.221957] -> #0 (&dev->power.lock){-...}-{2:2}: [ 47.236292] check_noncircular+0x128/0x140 [ 47.244907] __lock_acquire+0x13b0/0x204c [ 47.253332] lock_acquire.part.0+0x120/0x330 [ 47.262033] lock_acquire+0x64/0x80 [ 47.269826] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.278430] __pm_runtime_resume+0x40/0x74 [ 47.286758] sh_cmt_start+0x84/0x210 [ 47.294537] sh_cmt_clocksource_enable+0x28/0x50 [ 47.303449] change_clocksource+0x9c/0x160 [ 47.311783] multi_cpu_stop+0xa4/0x190 [ 47.319720] cpu_stopper_thread+0x90/0x154 [ 47.328022] smpboot_thread_fn+0x244/0x270 [ 47.336298] kthread+0x154/0x160 [ 47.343708] ret_from_fork+0x10/0x20 [ 47.351445] [ 47.351445] other info that might help us debug this: [ 47.351445] [ 47.370225] Chain exists of: [ 47.370225] &dev->power.lock --> tk_core.seq.seqcount --> &ch->lock [ 47.370225] [ 47.392003] Possible unsafe locking scenario: [ 47.392003] [ 47.405314] CPU0 CPU1 [ 47.413569] ---- ---- [ 47.421768] lock(&ch->lock); [ 47.428425] lock(tk_core.seq.seqcount); [ 47.438701] lock(&ch->lock); [ 47.447930] lock(&dev->power.lock); [ 47.455172] [ 47.455172] *** DEADLOCK *** [ 47.455172] [ 47.471433] 3 locks held by migration/0/11: [ 47.479099] #0: ffff8000113c9278 (timekeeper_lock){-.-.}-{2:2}, at: change_clocksource+0x2c/0x160 [ 47.491834] #1: ffff8000113c8f88 (tk_core.seq.seqcount){----}-{0:0}, at: multi_cpu_stop+0xa4/0x190 [ 47.504727] #2: ffff000040ad0298 (&ch->lock){....}-{2:2}, at: sh_cmt_start+0x28/0x210 [ 47.516541] [ 47.516541] stack backtrace: [ 47.528480] CPU: 0 PID: 11 Comm: migration/0 Not tainted 5.10.0-rc6-arm64-renesas-00001-g0e5fd7414e8b #36 [ 47.542147] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 47.554241] Call trace: [ 47.560832] dump_backtrace+0x0/0x190 [ 47.568670] show_stack+0x14/0x30 [ 47.576144] dump_stack+0xe8/0x130 [ 47.583670] print_circular_bug+0x1f0/0x200 [ 47.592015] check_noncircular+0x128/0x140 [ 47.600289] __lock_acquire+0x13b0/0x204c [ 47.608486] lock_acquire.part.0+0x120/0x330 [ 47.616953] lock_acquire+0x64/0x80 [ 47.624582] _raw_spin_lock_irqsave+0x7c/0xc4 [ 47.633114] __pm_runtime_resume+0x40/0x74 [ 47.641371] sh_cmt_start+0x84/0x210 [ 47.649115] sh_cmt_clocksource_enable+0x28/0x50 [ 47.657916] change_clocksource+0x9c/0x160 [ 47.666165] multi_cpu_stop+0xa4/0x190 [ 47.674056] cpu_stopper_thread+0x90/0x154 [ 47.682308] smpboot_thread_fn+0x244/0x270 [ 47.690560] kthread+0x154/0x160 [ 47.697927] ret_from_fork+0x10/0x20 [ 47.708447] clocksource: Switched to clocksource e60f0000.timer Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201205021921.1456190-2-niklas.soderlund+renesas@ragnatech.se
2020-12-07x86/platform/uv: Add deprecated messages to /proc info leavesMike Travis
Add "deprecated" message to any access to old /proc/sgi_uv/* leaves. [ bp: Do not have a trailing function opening brace and the arguments continuing on the next line and align them on the opening brace. ] Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/20201128034227.120869-5-mike.travis@hpe.com
2020-12-07x86/platform/uv: Add sysfs hubless leavesMike Travis
Add uv_sysfs hubless leaves for UV hubless systems. Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/20201128034227.120869-4-mike.travis@hpe.com
2020-12-07x86/platform/uv: Add sysfs leaves to replace those in procfsMike Travis
Add uv_sysfs leaves to display the info. Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/20201128034227.120869-3-mike.travis@hpe.com
2020-12-07x86/platform/uv: Add kernel interfaces for obtaining system infoMike Travis
Add kernel interfaces used to obtain info for the uv_sysfs driver to display. Signed-off-by: Mike Travis <mike.travis@hpe.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lkml.kernel.org/r/20201128034227.120869-2-mike.travis@hpe.com
2020-12-07media: ccs: Add support for obtaining C-PHY configuration from firmwareSakari Ailus
Try parsing the firmware also as C-PHY. Do this only after D-PHY as older firmware may not explicitly specify bus-type in which case D-PHY is the default. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Print pixel ratesSakari Ailus
Print pixel rates on CSI-2 bus as well as in pixel array as the variation allowed in PLL capabilities makes this non-trivial to figure out otherwise. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Print written register valuesSakari Ailus
This helps debugging register writes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Add support for DDR OP SYS and OP PIX clocksSakari Ailus
Support dual data rate operational system and pixel clocks by conveying the flags to the PLL calculator and updating how the link rate is calculated. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support for DDR OP system and pixel clocksSakari Ailus
Add support for dual data rate operational system and pixel clocks. This is implemented using two PLL flags. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07io_uring: fix mis-seting personality's credsPavel Begunkov
After io_identity_cow() copies an work.identity it wants to copy creds to the new just allocated id, not the old one. Otherwise it's akin to req->work.identity->creds = req->work.identity->creds. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-07docs: nios2: add missing ReST fileMauro Carvalho Chehab
changeset ed13a92d0fde ("docs: archis: add a per-architecture features list") besides having a typo on its title, it was missing the feature file. Add it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: ed13a92d0fde ("docs: archis: add a per-architecture features list") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/e51c4692c4420d28bca35f553a9a3f3d78404d99.1607331056.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-07media: ccs: Dual PLL supportSakari Ailus
Add support for sensors that either require dual PLL or support single or dual PLL but use dual PLL as default. Use sensor default configuration for sensors that support both modes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add trivial dual PLL supportSakari Ailus
Add support for sensors that have separate VT and OP domain PLLs. This support is trivial in the sense that it aims for the same VT pixel rate than that on the CSI-2 bus. The vast majority of sensors is better supported by higher frequencies in VT domain in binned and possibly scaled configurations. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Separate VT divisor limit calculation from the restSakari Ailus
Separate VT divisor limit calculation from the rest of the VT PLL branch calculation. This way it can be used for dual PLL support as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Fix VT post-PLL divisor calculationSakari Ailus
The PLL calculator only searched even total divisor values apart from one, but this is wrong: the total divisor is odd in cases where system divisor is one. Fix this by including odd total PLL values where system divisor is one to the search. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Make VT divisors 16-bitSakari Ailus
Make VT divisors 16-bit unsigned numbers. They don't need 32 bits after all. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Rework bounds checksSakari Ailus
Refactor bounds checks so that the caller can decide what to check. This allows doing the checks early, when the values are available. This also adds front OP PLL configuration and limits. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Print relevant information on PLL treeSakari Ailus
Print information on PLL tree configuration based on the flags. This also adds support for printing dual PLL trees, and better separates between OP and VT PLL trees. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Better separate OP and VT sub-tree calculationSakari Ailus
Better separate OP PLL branch calculation from VT branch calculation. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Check for derating and overrating, support non-derating sensorsSakari Ailus
Some sensors support derating (VT domain speed faster than OP) or overrating (VT domain speed slower than OP). While this was supported for the driver, the hardware support for the feature was never verified. Do that now, and for those devices without that support, VT and OP speeds have to match. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Split off VT subtree calculationSakari Ailus
Split off the VT sub clock tree calculation from the rest, into its own function. Also call the op_pll_fr argument pll_fr, since soon these may not be OP tree values. This paves way for additional features in the future such as dual PLL support. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add C-PHY supportSakari Ailus
Add C-PHY support for the CCS PLL calculator. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add sanity checksSakari Ailus
Add sanity checks for fields that could cause division by zero. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support flexible OP PLL pixel clock dividerSakari Ailus
Flexible OP PLL pixel clock divider allows a higher OP pixel clock than what the bus can transfer. This generally makes it easier to select pixel clock dividers. This changes how the pixel rate on the bus and minimum VT divisor are calculated, as the pixel rate is no longer directly determined by the OP pixel clock and the number of the lanes. Also add a sanity check for sensors that do not support flexible OP PLL pixel clock divider. This could have caused the PLL calculator to come up with an invalid configuration for those devices. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Support two cycles per pixel on OP domainSakari Ailus
The l parameter defines the number of clock cycles to process a single pixel per OP lane. It is calculated based on a new register op_bits_per_lane. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support for extended input PLL clock dividerSakari Ailus
CCS allows odd PLL dividers other than 1, granted that the corresponding capability bit is set. Support this both in the PLL calculator and the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support for decoupled OP domain calculationSakari Ailus
Add support for decoupled OP domain clock calculation. This means that the number of VT and OP domain clocks are no longer dependent on the number of CSI-2 lanes in the lane speed mode. The support also replaces the existing quirk flag to calculate OP domain clocks per lane. Also support decoupled OP domain calculation in the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs: Add support for lane speed modelSakari Ailus
Convey the relevant PLL flags to the PLL calculator. Also the lane speed model affects how the link rate is calculated on the CSI-2 bus, as the rate is total of all lanes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Add support for lane speed modelSakari Ailus
CCS PLL includes a capability to calculate the VT clocks on per-lane basis. Add support for this feature. Move calculation of the pixel rate on the CSI-2 bus early in the function as everything needed to calculate it is already available. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Use explicit 32-bit unsigned typeSakari Ailus
Use uint32_t instead of unsigned int for a variable that contains explicitly 32-bit numbers. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Fix check for PLL multiplier upper boundSakari Ailus
The additional multiplier (for higher VT timing) of the PLL multiplier was checked against the upper limit but the result was rounded up, possibly producing too high additional multiplier. Round down instead to keep within hardware limits. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Fix comment on check against maximum PLL multiplierSakari Ailus
The comment is about minimum PLL multiplier but the related check really deals with the maximum PLL multiplier. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Avoid overflow in pre-PLL divisor lower bound searchSakari Ailus
The external clock frequency times the PLL multiplier may exceed the value range of 32-bit unsigned integers. Instead perform the same calculation y using two divisions. The result has some potential to be different, but that's ok: this number is used to limit the range of pre-PLL divisors to find optimal values. So the effect of the rare case of a different result here would mean an invalid pre-PLL divisor is tried. That will be found out a little later in any case. Also guard against dividing by zero if the external clock frequency is higher than the maximum OP PLL output clock --- a rather improbable case. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Fix condition for pre-PLL divider lower boundSakari Ailus
The lower bound of the pre-PLL divider was calculated based on OP SYS clock frequency which is also affected by the OP SYS clock divider. This is wrong. The right clock frequency is that of the PLL output clock. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Begin calculation from OP system clock frequencySakari Ailus
The OP system clock frequency defines the CSI-2 bus clock frequency, not the PLL output clock frequency. Both values were overwritten in the end, but the wrong limit value was used for the OP system clock frequency, possibly leading to too high frequencies being used. Also remove now duplicated calculation of OP system clock frequency later in the PLL calculator. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Use the BIT macroSakari Ailus
Use the BIT macro for setting individual bits. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Document the structs in the header as well as the functionSakari Ailus
The CCS pll is used by the CCS driver at the moment, but documenting the interface makes sense. It's non-trivial and the calculator could be used elsewhere. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Move the flags field down, away from 8-bit fieldsSakari Ailus
This way the struct will use less memory, with better packing and no waste due to unsigned long. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Differentiate between CSI-2 D-PHY and C-PHYSakari Ailus
Differentiate between CSI-2 D-PHY and C-PHY. This does not yet include support for C-PHY. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Remove parallel bus supportSakari Ailus
The parallel bus PLL calculation has no users. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: End search if there are no better values availableSakari Ailus
The VT divisor search can be ended if we've already found the value that corresponds exactly the total divisor, as there are no better (lower) values available. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07media: ccs-pll: Use correct VT divisor for calculating VT SYS divisorSakari Ailus
Use the correct video timing divisor to calculate the SYS divisor. Instead of the current value, the minimum was used. This could have resulted in a too low SYS divisor. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-15 20:33:33 +0000