| Age | Commit message (Collapse) | Author |
|---|
|
Applications which use virtual LUN's that are backed by a physical LUN
over both adapter ports may experience an I/O failure in the event of a
link loss (e.g. cable pull).
Virtual LUNs may be accessed through one or both ports of the adapter.
This access is encoded in the translation entries that comprise the
virtual LUN and used by the AFU for load-balancing I/O and handling
failover scenarios. In a link loss scenario, even though the AFU is able
to maintain connectivity to the LUN, it is up to the application to
retry the failed I/O. When applications are unaware of the virtual LUN's
underlying topology, they are unable to make a sound decision of when to
retry an I/O and therefore are forced to make their reaction to a failed
I/O absolute. The result is either a failure to retry I/O or increased
latency for scenarios where a retry is pointless.
To remedy this scenario, provide feedback back to the application on
virtual LUN creation as to which ports the LUN may be accessed. LUN's
spanning both ports are candidates for a retry in a presence of an I/O
failure.
Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Manoj Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The original fix to escalate a 'login timed out' error to a LINK_RESET
was only made for one of the two ports on the card. This fix resolves
the same issue for the second port (port 1).
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Merge several improvements to Goodix touchscreen driver:
- power management support
- configuration upload
- axis swapping and inversion
|
|
Add DT bindings for NAND devices connected to the NEMC on JZ4780 SoCs,
as well as the hardware BCH controller, used by the jz4780_{nand,bch}
drivers.
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
kmalloc needs to be handled when failing in memory pressure.
Also, it has memory leak in error routine.
Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
On Micron and Numonyx devices, the status register write command
(WRSR), raises a work-in-progress bit (WIP) on the status register.
The datasheets for these devices specify that while the status
register write is in progress, the status register WIP bit can still
be read to check the end of the operation.
This commit adds a wait_till_ready call on lock/unlock operations,
which is required for Micron and Numonyx but should be harmless for
others. This is needed to prevent applications from issuing erase or
program operations before the unlock operation is completed.
Reported-by: Stas Sergeev <stsp@list.ru>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Pull networking fixes from David Miller:
"As usual, there are a couple straggler bug fixes:
1) qlcnic_alloc_mbx_args() error returns are not checked in qlcnic
driver. Fix from Insu Yun.
2) SKB refcounting bug in connector, from Florian Westphal.
3) vrf_get_saddr() has to propagate fib_lookup() errors to it's
callers, from David Ahern.
4) Fix AF_UNIX splice/bind deadlock, from Rainer Weikusat.
5) qdisc_rcu_free() fails to free the per-cpu qstats. Fix from John
Fastabend.
6) vmxnet3 driver passes wrong page to dma_map_page(), fix from
Shrikrishna Khare.
7) Don't allow zero cwnd in tcp_cwnd_reduction(), from Yuchung Cheng"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
tcp: fix zero cwnd in tcp_cwnd_reduction
Driver: Vmxnet3: Fix regression caused by 5738a09
net: qmi_wwan: Add WeTelecom-WPD600N
mkiss: fix scribble on freed memory
net: possible use after free in dst_release
net: sched: fix missing free per cpu on qstats
ARM: net: bpf: fix zero right shift
6pack: fix free memory scribbles
net: filter: make JITs zero A for SKF_AD_ALU_XOR_X
bridge: Only call /sbin/bridge-stp for the initial network namespace
af_unix: Fix splice-bind deadlock
net: Propagate lookup failure in l3mdev_get_saddr to caller
r8152: add reset_resume function
connector: bump skb->users before callback invocation
cxgb4: correctly handling failed allocation
qlcnic: correctly handle qlcnic_alloc_mbx_args
|
|
This patch moves v3 pinnacle code for trackstick detection from
alps_hw_init_v3() to alps_set_protocol() so ALPS_DUALPOINT flag can be
cleared before registering trackstick input device in kernel.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This patch adds detection of trackstick for v7 protocol devices. Code in
this patch is used in official Dell touchpad linux drivers for Dell models:
Dell Latitude E5250/5250, E5450/5450, E5550/5550
Detection code and base reg for alps v3 rushmore and v7 devices is exacly
same.
Also user in bug https://bugzilla.kernel.org/show_bug.cgi?id=94801 reported
that Toshiba Sattellite Z30-A-1DG has only alps v7 touchpad device without
trackstick and kernel reports to userspace also redundant trackstick
device.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This is an API consolidation only. The use of kmalloc + memset to 0
is equivalent to kzalloc.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Use to_delayed_work() instead of open-coding it.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
This patch fixes a bug in __perf_pmu__new_alias() whereby the
alias->snapshot field was not initialized to false. This led to random
alias->snapshot value for an alias and was breaking some measurements
such as:
$ perf stat -a -e uncore_imc/data_reads/ -I 1000 sleep 100
Because the event ended up being treated as snapshot mode, when it is
not.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1452106201-13073-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding stat-cpi.py as an example of how to do stat scripting.
It computes the CPI metrics from cycles and instructions events.
The CPI is based performance metric showing the Cycles Per Instructions
ratio, which helps to identify cycles-hungry code.
Following stat record/report/script combinations could be used:
- get CPI for given workload
$ perf stat -e cycles,instructions record ls
SNIP
Performance counter stats for 'ls':
2,904,431 cycles
3,346,878 instructions # 1.15 insns per cycle
0.001782686 seconds time elapsed
$ perf script -s ./scripts/python/stat-cpi.py
0.001783: cpu -1, thread -1 -> cpi 0.867803 (2904431/3346878)
$ perf stat -e cycles,instructions record ls | perf script -s ./scripts/python/stat-cpi.py
SNIP
0.001730: cpu -1, thread -1 -> cpi 0.869026 (2928292/3369627)
- get CPI systemwide:
$ perf stat -e cycles,instructions -a -I 1000 record sleep 3
# time counts unit events
1.000158618 594,274,711 cycles (100.00%)
1.000158618 441,898,250 instructions
2.000350973 567,649,705 cycles (100.00%)
2.000350973 432,669,206 instructions
3.000559210 561,940,430 cycles (100.00%)
3.000559210 420,403,465 instructions
3.000670798 780,105 cycles (100.00%)
3.000670798 326,516 instructions
$ perf script -s ./scripts/python/stat-cpi.py
1.000159: cpu -1, thread -1 -> cpi 1.344823 (594274711/441898250)
2.000351: cpu -1, thread -1 -> cpi 1.311972 (567649705/432669206)
3.000559: cpu -1, thread -1 -> cpi 1.336669 (561940430/420403465)
3.000671: cpu -1, thread -1 -> cpi 2.389178 (780105/326516)
$ perf stat -e cycles,instructions -a -I 1000 record sleep 3 | perf script -s ./scripts/python/stat-cpi.py
1.000202: cpu -1, thread -1 -> cpi 1.035091 (940778881/908885530)
2.000392: cpu -1, thread -1 -> cpi 1.442600 (627493992/434974455)
3.000545: cpu -1, thread -1 -> cpi 1.353612 (741463930/547766890)
3.000622: cpu -1, thread -1 -> cpi 2.642110 (784083/296764)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If no script is specified for stat data, display stat events in raw
form.
$ perf stat record ls
SNIP
Performance counter stats for 'ls':
0.851585 task-clock (msec) # 0.717 CPUs utilized
0 context-switches # 0.000 K/sec
0 cpu-migrations # 0.000 K/sec
114 page-faults # 0.134 M/sec
2,620,918 cycles # 3.078 GHz
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
2,714,111 instructions # 1.04 insns per cycle
542,434 branches # 636.970 M/sec
15,946 branch-misses # 2.94% of all branches
0.001186954 seconds time elapsed
$ perf script
CPU THREAD VAL ENA RUN TIME EVENT
-1 26185 851585 851585 851585 1186954 task-clock
-1 26185 0 851585 851585 1186954 context-switches
-1 26185 0 851585 851585 1186954 cpu-migrations
-1 26185 114 851585 851585 1186954 page-faults
-1 26185 2620918 853340 853340 1186954 cycles
-1 26185 0 0 0 1186954 stalled-cycles-frontend
-1 26185 0 0 0 1186954 stalled-cycles-backend
-1 26185 2714111 853340 853340 1186954 instructions
-1 26185 542434 853340 853340 1186954 branches
-1 26185 15946 853340 853340 1186954 branch-misses
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-3-git-send-email-jolsa@kernel.org
[ Rename 'time' parameter to 'tstamp' to fix build on older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We can't convert u16 cpu_map_entries::cpu[x] value directly to int,
because it could hold -1, which would be converted as 65535.
Adding special treatment for -1, which is not real cpu number, to be
converted to (int -1).
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452077397-31958-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support to get stat events data in perf python scripts.
The python script shall implement the following new interface to process
stat data:
def stat__<event_name>_[<modifier>](cpu, thread, time, val, ena, run):
- is called for every stat event for given counter,
if user monitors 'cycles,instructions:u" following
callbacks should be defined:
def stat__cycles(cpu, thread, time, val, ena, run):
def stat__instructions_u(cpu, thread, time, val, ena, run):
def stat__interval(time):
- is called for every interval with its time,
in non interval mode it's called after last
stat event with total measured time in ns
The rest of the current interface stays untouched..
Please check example CPI metrics script in following patch
with command line examples in changelogs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-8-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Implement struct scripting_ops::(process_stat|process_stat_interval)
handlers - calling scripting handlers from stat events handlers.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-6-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Python and perl scripting code will define those callbacks and get stat
data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-5-git-send-email-jolsa@kernel.org
[ Rename 'time' parameters to 'tstamp', to fix the build in older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding processing of stat config event and initialize stat_config
object.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding processing of cpu/threads maps. Configuring session's evlist with
these maps.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Kan Liang <kan.liang@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For pipe sessions we need to keep sample_type zero, because script's
perf_evsel__check_attr is triggered by sample_type != 0, and the check
would fail on stat session.
I was tempted to keep it zero unconditionally, but the pipe session is
sufficient. In perf.data session we are guarded by HEADER_STAT feature.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1452028152-26762-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1451991518-25673-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When a perf.data file has multiple events, it's likely to be similar
(tracepoint) events. In that case, they might have same field name so
add all of them to sort keys instead of bailing out.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1451991518-25673-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using FEATURE-DUMP in bpf subproject for features detection in case bpf
is built via perf. Keeping the current features detection otherwise.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Changing the contents of the FEATURE-DUMP file, so it looks like:
feature-backtrace=1
feature-dwarf=0
feature-fortify-source=1
feature-sync-compare-and-swap=0
This way it could get included in sub projects, so they won't be forced
to redo features detection.
Also now storing the complete set of features.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature_assign macro generates feature value
assignment for name, like:
$(call feature_assign,dwarf) == feature-dwarf=1
This will be used more in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-4-git-send-email-jolsa@kernel.org
[ Rename it to feature_assign, the original shorter name was misleading, to say the least ;-) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We decide what dwarf unwind to choose way after the Makefile.feature
makefile is included. The $(dwarf-post-unwind) is not even set at that
time. For the same reason it was never included in FEATURE-DUMP file.
Moving it into perf VF=1 verbose display.
$ make VF=1
BUILD: Doing 'make -j4' parallel build
Auto-detecting system features:
... dwarf: [ on ]
...
... LIBUNWIND_DIR:
... LIBDW_DIR:
... DWARF post unwind library: libunwind
...
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This function is cursed.. ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama <pi3orama@163.com>
Link: http://lkml.kernel.org/r/1450893514-9158-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
events
When an evlist contains tracepoint events only, use 'trace' sort key as
default. If --raw-trace option was given, use 'trace_fields' instead.
This will make users more convenient to see trace result.
Suggested-and-Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-14-git-send-email-namhyung@kernel.org
[ Check evlist in get_default_sort_order() fixing a segfault in 'perf test hists' reported by Jiri Olsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'trace_fields' sort key is similar as 'trace' sort key, but it shows
each fields separately. Each event will get different columns as their
fields.
$ perf report -s trace_fields --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 20K of event 'kmem:kmalloc'
# Event count (approx.): 20533
#
# Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags
# ........ ....... .................. .................. ......... ........... ...................
#
99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO
0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL
0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO
0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL
0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL
0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL
0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL
# Samples: 20K of event 'kmem:kfree'
# Event count (approx.): 20597
#
# Overhead call_site ptr
# ........ .................. ..................
#
99.58% ffffffffa01d85ad 0xffff8803ffb79720
0.07% ffffffff81443f5c 0xffff8803f7669400
0.02% ffffffff811d5753 0xffff8803f7678f00
0.01% ffffffff81443f5c 0xffff8803f766be00
0.01% ffffffff8114e359 0xffff8803d228a000
0.01% ffffffff81443f5c 0xffff8800d156dc00
0.01% ffffffff81443f5c 0xffff8803f7669400
0.01% ffffffff8114e359 0xffff8803d228a000
0.01% ffffffff8114e359 0xffff8803d228a000
0.01% ffffffff8114e359 0xffff8803d228a000
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-13-git-send-email-namhyung@kernel.org
[ Combined with "perf tools: Fix segfault when using -s trace_fields" ]
Link: http://lkml.kernel.org/r/1451991518-25673-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When there are multiple events, each dynamic sort key is defined just
for one event. In this case other events will always show "N/A" for
those fields. But they are meaningless and consume precious screen
width.
Let's skip those undefined dynamic fields.
$ perf record -e kmem:kmalloc,kmem:kfree -a sleep 1
$ perf report -s 'comm,kmalloc.*' --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 20K of event 'kmem:kmalloc'
# Event count (approx.): 20533
#
# Overhead Command call_site ptr bytes_req bytes_alloc gfp_flags
# ........ ....... .................. .................. ......... ........... ...................
#
99.89% perf ffffffffa01d4396 0xffff8803ffb79720 96 96 GFP_NOFS|GFP_ZERO
0.06% sleep ffffffff8114e1cd 0xffff8803d228a000 4096 4096 GFP_KERNEL
0.03% perf ffffffff811d6ae6 0xffff8803f7678f00 240 256 GFP_KERNEL|GFP_ZERO
0.00% perf ffffffff812263c1 0xffff880406172380 128 128 GFP_KERNEL
0.00% perf ffffffff812264b9 0xffff8803ffac1600 504 512 GFP_KERNEL
0.00% perf ffffffff81226634 0xffff880401dc5280 28 32 GFP_KERNEL
0.00% sleep ffffffff81226da9 0xffff8803ffac3a00 392 512 GFP_KERNEL
# Samples: 20K of event 'kmem:kfree'
# Event count (approx.): 20597
#
# Overhead Command
# ........ ..............
#
99.63% perf
0.14% sleep
0.11% irq/36-iwlwifi
0.11% kworker/u16:0
0.01% Xorg
0.00% firefox
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-12-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support '*' character for field name to add all (non-common) fields as
sort keys easily.
$ perf report -s 'switch.*' --stdio
...
# Overhead prev_comm prev_pid prev_prio prev_state next_comm next_pid next_prio
# ........ ........... ......... ......... .......... ............ ........ .........
#
3.82% swapper/0 0 120 0 netctl-auto 18711 120
3.75% netctl-auto 18711 120 1 swapper/0 0 120
2.24% swapper/1 0 120 0 netctl-auto 18709 120
2.24% netctl-auto 18709 120 1 swapper/1 0 120
1.80% swapper/2 0 120 0 rcu_preempt 7 120
1.80% swapper/2 0 120 0 netctl-auto 18711 120
1.80% rcu_preempt 7 120 1 swapper/2 0 120
1.80% netctl-auto 18711 120 1 swapper/2 0 120
...
Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The dynamic sort key requires event name but specifying full event name
is rather inconvenient. This patch adds more ways to identify the event
in a more compact way.
1. If session has just one event, event name can be omitted.
2. Events can be accessed by index preceded by a percent sign.
3. A part of the name can be used, if it's not ambiguous. The partial
name should not contain ':' in it.
4. Full system + event name is still used, it should contain ':'.
So in the below example all does same thing:
$ perf record -e sched:sched_switch -a sleep 1
$ perf report -s next_pid,next_comm
$ perf report -s %1.next_pid,%1.next_comm
$ perf report -s switch.next_pid,switch.next_comm
$ perf report -s sched:sched_switch.next_pid,sched:sched_switch.next_comm
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The --raw-trace option allows disabling pretty printing by the event's
print_fmt or plugin. Besides that, each dynamic sort key now can
receive a 'raw' suffix separated by '/' to ask for the raw trace of a
specific field.
$ perf report -s comm,kmem:kmalloc.gfp_flags
...
# Overhead Command gfp_flags
# ........ ....... ...................
#
99.89% perf GFP_NOFS|GFP_ZERO
0.06% sleep GFP_KERNEL
0.03% perf GFP_KERNEL|GFP_ZERO
0.01% perf GFP_KERNEL
Now
$ perf report -s comm,kmem:kmalloc.gfp_flags --raw-trace
or
$ perf report -s comm,kmem:kmalloc.gfp_flags/raw
...
# Overhead Command gfp_flags
# ........ ....... ..........
#
99.89% perf 32848
0.06% sleep 208
0.03% perf 32976
0.01% perf 208
Suggested-and-Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 'trace' sort key is to show tracepoint event output using either
print fmt or plugin. For example sched_switch event (using plugin) will
show output like below:
# perf record -e sched:sched_switch -a usleep 10
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.197 MB perf.data (69 samples) ]
#
$ perf report -s trace --stdio
...
# Overhead Trace output
# ........ ...................................................
#
9.48% swapper/0:0 [120] R ==> transmission-gt:17773 [120]
9.48% transmission-gt:17773 [120] S ==> swapper/0:0 [120]
9.04% swapper/2:0 [120] R ==> transmission-gt:17773 [120]
8.92% transmission-gt:17773 [120] S ==> swapper/2:0 [120]
5.25% swapper/0:0 [120] R ==> kworker/0:1H:109 [100]
5.21% kworker/0:1H:109 [100] S ==> swapper/0:0 [120]
1.78% swapper/3:0 [120] R ==> transmission-gt:17773 [120]
1.78% transmission-gt:17773 [120] S ==> swapper/3:0 [120]
1.53% Xephyr:6524 [120] S ==> swapper/0:0 [120]
1.53% swapper/0:0 [120] R ==> Xephyr:6524 [120]
1.17% swapper/2:0 [120] R ==> irq/33-iwlwifi:233 [49]
1.13% irq/33-iwlwifi:233 [49] S ==> swapper/2:0 [120]
Note that the 'trace' sort key works only for tracepoint events. If
it's used to other type of events, just "N/A" will be printed.
Suggested-and-acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Each tracepoint event has format string for print to improve
readability. Try to parse the output and match the field name. If it
finds one, use that for the result. If not, fallbacks to the original
output.
For example, sort on kmem:kmalloc.gfp_flags looks like below:
(Note: libtraceevent plugins are not installed on my system. They might
affect the output below)
Before:
# Overhead Command gfp_flags
# ........ ....... ..........
#
99.89% perf 32848
0.06% sleep 208
0.03% perf 32976
0.01% perf 208
After:
# Overhead Command gfp_flags
# ........ ....... ...................
#
99.89% perf GFP_NOFS|GFP_ZERO
0.06% sleep GFP_KERNEL
0.03% perf GFP_KERNEL|GFP_ZERO
0.01% perf GFP_KERNEL
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-7-git-send-email-namhyung@kernel.org
[ Fixed clash with earlier, updated patch in this patchkit ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The existing sort keys are less useful for tracepoint events in that
they are always sampled at the same place, the function where the
tracepoint is located.
For example, a 'perf report' on sched:sched_switch event looks like the
following:
# Overhead Command Shared Object Symbol
# ........ ............... ................ ..............
#
47.22% swapper [kernel.vmlinux] [k] __schedule
21.67% transmission-gt [kernel.vmlinux] [k] __schedule
8.23% netctl-auto [kernel.vmlinux] [k] __schedule
5.53% kworker/0:1H [kernel.vmlinux] [k] __schedule
1.98% Xephyr [kernel.vmlinux] [k] __schedule
1.33% irq/33-iwlwifi [kernel.vmlinux] [k] __schedule
1.17% wpa_cli [kernel.vmlinux] [k] __schedule
1.13% rcu_preempt [kernel.vmlinux] [k] __schedule
0.85% ksoftirqd/0 [kernel.vmlinux] [k] __schedule
0.77% Timer [kernel.vmlinux] [k] __schedule
In fact, tracepoints have meaningful information in their fields but
there's no way to use in 'perf report' currently. The dynamic sort keys
are introduced in this patc to overcome this limitation.
The sched:sched_switch events have following fields:
# sudo cat /sys/kernel/debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 268
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:char prev_comm[16]; offset:8; size:16; signed:1;
field:pid_t prev_pid; offset:24; size:4; signed:1;
field:int prev_prio; offset:28; size:4; signed:1;
field:long prev_state; offset:32; size:8; signed:1;
field:char next_comm[16]; offset:40; size:16; signed:1;
field:pid_t next_pid; offset:56; size:4; signed:1;
field:int next_prio; offset:60; size:4; signed:1;
print fmt: "prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s%s ==>
next_comm=%s next_pid=%d next_prio=%d",
REC->prev_comm, REC->prev_pid, REC->prev_prio,
REC->prev_state & (2048-1) ? __print_flags(REC->prev_state & (2048-1),
"|", { 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" }, { 16, "Z" }, { 32, "X" },
{ 64, "x" }, { 128, "K"}, { 256, "W" }, { 512, "P" }, { 1024, "N" }) : "R",
REC->prev_state & 2048 ? "+" : "", REC->next_comm, REC->next_pid, REC->next_prio
With dynamic sort keys, you can use <event.field> as a sort key. Those
dynamic keys are checked and created on demand. For instance, below is
to sort by next_pid field output on the same data file:
$ perf report -s comm,sched:sched_switch.next_pid --stdio
...
# Overhead Command next_pid
# ........ ............... ..........
#
21.23% transmission-gt 0
20.86% swapper 17773
6.62% netctl-auto 0
5.25% swapper 109
5.21% kworker/0:1H 0
1.98% Xephyr 0
1.98% swapper 6524
1.98% swapper 27478
1.37% swapper 27476
1.17% swapper 233
Multiple dynamic sort keys are also supported:
$ perf report -s comm,sched:sched_switch.next_pid,sched:sched_switch.next_comm --stdio
...
# Overhead Command next_pid next_comm
# ........ ............... .......... ................
#
20.86% swapper 17773 transmission-gt
9.64% transmission-gt 0 swapper/0
9.16% transmission-gt 0 swapper/2
5.25% swapper 109 kworker/0:1H
5.21% kworker/0:1H 0 swapper/0
2.14% netctl-auto 0 swapper/2
1.98% netctl-auto 0 swapper/0
1.98% swapper 6524 Xephyr
1.98% swapper 27478 netctl-auto
1.78% transmission-gt 0 swapper/3
1.53% Xephyr 0 swapper/0
1.29% netctl-auto 0 swapper/1
1.29% swapper 27476 netctl-auto
1.21% netctl-auto 0 swapper/3
1.17% swapper 233 irq/33-iwlwifi
Note that pid 0 exists for each cpu so have comm of 'swapper/N'.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a preparation to support dynamic sort keys for tracepoint
events. Dynamic sort keys can be created for specific fields in trace
events so it needs the event information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-5-git-send-email-namhyung@kernel.org
[ Moving the evlist creation earlier in top was split to a previous patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a preparation to support dynamic sort keys for tracepoint
events. Dynamic sort keys can be created for specific fields in trace
events so it needs the event information, so we need to pass the evlist
to the sort routines, create it sooner so that the next patch can do
that.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-5-git-send-email-namhyung@kernel.org
[ Split from the patch passing the evlist to the sort routines ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The print_event_field() and print_event_fields() functions print basic
information of a given field or event without the print format. They'll
be used by dynamic sort keys later.
Committer note:
Rename it to pevent_print_field[s]() to get proper namespacing, as
discussed with Steven Rostedt.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450876121-22494-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The raw_data and raw_size fields are to provide tracepoint specific
information. They will be used by dynamic sort keys later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450923377-18641-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This is a preparation to add more info into the hist_entry. Also it
already passes too many argument, so passing sample directly will reduce
the overhead of the function call.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1450804030-29193-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Commits such as commit 853f1c58c4b2 ("mtd: nand: omap2: show parent
device structure in sysfs") attempt to rely on the core MTD code to set
the MTD name based on the parent device. However, nand_base tries to set
a different default name according to the flash name (e.g., extracted
from the ONFI parameter page), which means NAND drivers will never make
use of the MTD defaults. This is not the intention of commit
853f1c58c4b2.
This results in problems when trying to use the cmdline partition
parser, since the MTD name is different than expected. Let's fix this by
providing a default NAND name, where possible.
Note that this is not really a great default name in the long run, since
this means that if there are multiple MTDs attached to the same
controller device, they will have the same name. But that is an existing
issue and requires future work on a better controller vs. flash chip
abstraction to fix properly.
Fixes: 853f1c58c4b2 ("mtd: nand: omap2: show parent device structure in sysfs")
Reported-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Heiko Schocher <hs@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Frans Klaver <fransklaver@gmail.com>
Cc: <stable@vger.kernel.org>
|
|
Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode
conditionally") introduced a bug that cwnd may become 0 when both
inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead
to a div-by-zero if the connection starts another cwnd reduction
phase by setting tp->prior_cwnd to the current cwnd (0) in
tcp_init_cwnd_reduction().
To prevent this we skip PRR operation when nothing is acked or
sacked. Then cwnd must be positive in all cases as long as ssthresh
is positive:
1) The proportional reduction mode
inflight > ssthresh > 0
2) The reduction bound mode
a) inflight == ssthresh > 0
b) inflight < ssthresh
sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh
Therefore in all cases inflight and sndcnt can not both be 0.
We check invalid tp->prior_cwnd to avoid potential div0 bugs.
In reality this bug is triggered only with a sequence of less common
events. For example, the connection is terminating an ECN-triggered
cwnd reduction with an inflight 0, then it receives reordered/old
ACKs or DSACKs from prior transmission (which acks nothing). Or the
connection is in fast recovery stage that marks everything lost,
but fails to retransmit due to local issues, then receives data
packets from other end which acks nothing.
Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally")
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A repeating pattern in drivers has become to use OF node information
and, if not found, platform specific host information to extract the
ethernet address for a given device.
Currently this is done with a call to of_get_mac_address() and then
some ifdef'd stuff for SPARC.
Consolidate this into a portable routine, and provide the
arch_get_platform_mac_address() weak function hook for all
architectures to implement if they want.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reported-by: Bingkuo Liu <bingkuol@vmware.com>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TX fast path uses ndo_start_xmit(), ndo_features_check() and
ndo_select_queue().
Move ndo_features_check() close to ndo_start_xmit() to increase
data locality.
All "struct net_device_ops" should now be using C99 initializers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On the interrupt path, we repeatedly establish the pointer to the
storvsc_device. While the compiler does inline get_in_stor_device() (and
other static functions) in the call chain in the interrupt path, the
compiler is repeatedly inlining the call to get_in_stor_device() each
time it is invoked. The return value of get_in_stor_device() can be
cached in the interrupt path since there is higher level serialization
in place to ensure correct handling when the module unload races with
the processing of an incoming message from the host. Optimize this code
path by caching the pointer to storvsc_device and passing it as an
argument.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The function storvsc_channel_init() repeatedly interacts with the host
to extract various channel properties. Refactor this code to eliminate
code repetition.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
For FC devices managed by this driver, atttach the appropriate transport
template. This will allow us to create the appropriate sysfs files for
these devices. With this we can publish the wwn for both the port and the node.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Tested-by: Alex Ng <alexng@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
