| Age | Commit message (Collapse) | Author |
|---|
|
Use devm_add_action_or_reset() instead of devres_alloc() and
devres_add(), which works the same. This will simplify the
code. There is no functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
There are no users and seems no will come of the devm_pwm_put().
Remove the function.
While at it, slightly update documentation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Historically we have two different approaches on how to check type of fwnode.
Unify them using the latest and greatest fwnode related APIs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
In ACPI case we may use matching by fwnode as provided via
fwnode_to_pwmchip(). This makes device_to_pwmchip() not needed
anymore.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
When we traverse the list of the registered PWM controllers,
use fwnode to match. This will help for further cleanup.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
When PWM support for ACPI has been added into the kernel, it missed
the documentation update. Hence update documentation here.
Fixes: 4a6ef8e37c4d ("pwm: Add support referencing PWMs from ACPI")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add compatible string for AM64 SoC in device tree binding.
IP is compatible with ti,am3352-ecap, so adding the AM64 compatible
under enum of one of the compatible list entry.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Convert the tiecap binding to DT schema format using json-schema.
Along with this conversion the following changes are included:
- 'clock' and 'clock-names' properties are marked required as
driver fails to probe without these properties
- Dropped ti,am33xx-ecap as it is no longer applicable.
- 'power-domains' property is introduced and marked as optional.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
pwmchip_remove() returns always 0. Don't use the value to make it
possible to eventually change the function to return void. This is a
good thing as pwmchip_remove() is usually called from a remove function
(mostly for platform devices) and their return value is ignored by the
device core anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
In most functions the driver data variable is called pc. Do the same in
the two remaining functions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The .remove() function is only called after .probe() returned
successfully. In this case platform_set_drvdata() was called with a
non-NULL argument and so platfrom_get_drvdata() returns the same
non-NULL value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
pwmchip_remove() always returns 0. Don't use the value to make it
possible to eventually change the function to return void. This is a
good thing as pwmchip_remove() is usually called from a remove function
(mostly for platform devices) and their return value is ignored by the
device core anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply(). This just pushes down a slightly
optimized variant of how legacy drivers are handled in the core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
A struct berlin_pwm_chip * is now always called "bpc" (instead of "pwm"
which is usually used for struct pwm_device * or "chip" which is usually
used for struct pwm_chip *). The struct pwm_device * variables were
named "pwm_dev" or "pwm"; they are now always called "pwm".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Now that all users of ->stop_cpu() have been migrated to using other
callbacks, drop it from the core.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor edits in the subject and changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 367dc4aa932b ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.
At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.
This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
->exit(), as everything can be done from the ->exit() callback
itself.
Migrate to using the ->exit() callback instead of ->stop_cpu().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 367dc4aa932b ("cpufreq: Add stop CPU callback to cpufreq_driver
interface") added the ->stop_cpu() callback to allow the drivers to do
clean up before the CPU is completely down and its state can't be
modified.
At that time the CPU hotplug framework used to call the cpufreq core's
registered notifier for different events like CPU_DOWN_PREPARE and
CPU_POST_DEAD. The ->stop_cpu() callback was called during the
CPU_DOWN_PREPARE event.
This is no longer the case, cpuhp_cpufreq_offline() is called only
once by the CPU hotplug core now and we don't really need two
separate callbacks for cpufreq drivers, i.e. ->stop_cpu() and
-<exit(), as everything can be done from the ->exit() callback
itself.
Migrate to using the ->exit() callback instead of ->stop_cpu().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Minor edits in the changelog and subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Combine the ->stop_cpu() and ->offline() callback routines for
intel_pstate in the active mode so as to avoid setting the
->stop_cpu callback pointer which is going to be dropped from
the framework.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Export jbd2_journal_[un]register_shrinker() to fix this error when
ext4 is built as a module:
ERROR: modpost: "jbd2_journal_unregister_shrinker" undefined!
ERROR: modpost: "jbd2_journal_register_shrinker" undefined!
Fixes: 4ba3fcdde7e3 ("jbd2,ext4: add a shrinker to release checkpointed buffers")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210630083638.140218-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The tgid_map array records a mapping from pid to tgid, where the index
of an entry within the array is the pid & the value stored at that index
is the tgid.
The saved_tgids_next() function iterates over pointers into the tgid_map
array & dereferences the pointers which results in the tgid, but then it
passes that dereferenced value to trace_find_tgid() which treats it as a
pid & does a further lookup within the tgid_map array. It seems likely
that the intent here was to skip over entries in tgid_map for which the
recorded tgid is zero, but instead we end up skipping over entries for
which the thread group leader hasn't yet had its own tgid recorded in
tgid_map.
A minimal fix would be to remove the call to trace_find_tgid, turning:
if (trace_find_tgid(*ptr))
into:
if (*ptr)
..but it seems like this logic can be much simpler if we simply let
seq_read() iterate over the whole tgid_map array & filter out empty
entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that
approach, removing the incorrect logic here entirely.
Link: https://lkml.kernel.org/r/20210630003406.4013668-1-paulburton@google.com
Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Paul Burton <paulburton@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The __assign_str macro has an unusual ending semicolon but the vast
majority of uses of the macro already have semicolon termination.
$ git grep -P '\b__assign_str\b' | wc -l
551
$ git grep -P '\b__assign_str\b.*;' | wc -l
480
Add semicolons to the __assign_str() uses without semicolon termination
and all the other uses without semicolon termination via additional defines
that are equivalent to __assign_str() with the eventual goal of removing
the semicolon from the __assign_str() macro definition.
Link: https://lore.kernel.org/lkml/1e068d21106bb6db05b735b4916bb420e6c9842a.camel@perches.com/
Link: https://lkml.kernel.org/r/48a056adabd8f70444475352f617914cef504a45.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The wakeup_rt wakeup_dl, tracing_dl is only set to 0, 1.
So changing type of wakeup_rt wakeup_dl, tracing_dl as bool
makes relevant routine be more readable.
Link: https://lkml.kernel.org/r/20210629140548.GA1627@raspberrypi
Signed-off-by: Austin Kim <austin.kim@lge.com>
[ Removed unneeded initialization of static bool tracing_dl ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
https://git.linaro.org/people/daniel.lezcano/linux
Pull ARM cpuidle updates for v5.14 from Daniel Lezcano:
"- Add support for Qcom MSM8226 (Bartosz Dudziak)"
* tag 'cpuidle-v5.14-rc1' of https://git.linaro.org/people/daniel.lezcano/linux:
cpuidle: qcom: Add SPM register data for MSM8226
dt-bindings: arm: msm: Add SAW2 for MSM8226
|
|
When 32-bit MIPS huge page support is enabled, we halve the number of
pointers a PTE page holds, making its last half go to waste.
Correspondingly, we should halve the number of kmap entries, as we just
initialized only a single pte table for that in pagetable_init().
Fixes: 35476311e529 ("MIPS: Add partial 32-bit huge page support")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
1.Add a new TCU channel as the percpu timer of core1, this is to
prepare for the subsequent SMP support. The newly added channel
will not adversely affect the current single-core state.
2.Adjust the position of TCU node to make it consistent with the
order in jz4780.dtsi file.
Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The original clock (3 MHz) is too fast for the clocksource,
there will be a chance that the system may get stuck.
Reported-by: Nikolaus Schaller <hns@goldelico.com>
Tested-by: Nikolaus Schaller <hns@goldelico.com> # on CI20
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add MAC syscon nodes for X1000 SoC and X1830 SoC from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Update the CGU binding documentation, add mac-phy-ctrl as a
pattern property.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N * X) cells.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Code which runs with interrupts enabled should be moved above
__end_soft_masked where possible, because maskable interrupts that hit
below that symbol will need to consult the soft mask table, which is an
extra cost.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-10-npiggin@gmail.com
|
|
Normal kernel-interrupt exits can get interrupt_return_srr_user_restart
in their backtrace, which is an unusual and notable function, and it is
part of the user-interrupt exit path, which is doubly confusing.
Add non-local labels for both user and kernel interrupt exit cases to
address this and make the user and kernel cases more symmetric. Also get
rid of an unused label.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-9-npiggin@gmail.com
|
|
If one interrupt exit symbol must not be kprobed, none of them can be,
without more justification for why it's safe. Disallow kprobing on any
of the (non-local) labels in the exit paths.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-8-npiggin@gmail.com
|
|
Similar to commit 2b48e96be2f9f ("powerpc/64: fix irq replay
pt_regs->softe value"), enable MSR_EE in pt_regs->msr. This makes the
regs look more normal. It also allows some extra debug checks to be
added to interrupt handler entry.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-7-npiggin@gmail.com
|
|
If an NMI interrupt hits in an implicit soft-masked region, regs->softe
is modified to reflect that. This may not be necessary for correctness
at the moment, but it is less surprising and it's unhelpful when
debugging or adding checks.
Make sure this is changed back to how it was found before returning.
Fixes: 4ec5feec1ad0 ("powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-6-npiggin@gmail.com
|
|
Commit 9d1988ca87dd ("powerpc/64: treat low kernel text as irqs
soft-masked") ends up catching too much code, including ret_from_fork,
and parts of interrupt and syscall return that do not expect to be
interrupts to be soft-masked. If an interrupt gets marked pending,
and then the code proceeds out of the implicit soft-masked region it
will fail to deal with the pending interrupt.
Fix this by adding a new table of addresses which explicitly marks
the regions of code that are soft masked. This table is only checked
for interrupts that below __end_soft_masked, so most kernel interrupts
will not have the overhead of the table search.
Fixes: 9d1988ca87dd ("powerpc/64: treat low kernel text as irqs soft-masked")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-5-npiggin@gmail.com
|
|
The implicit soft-masking to speed up interrupt return was going to be
used by 64e as well, but it has not been extensively tested on that
platform and is not considered ready. It was intended to be disabled
before merge. Disable it for now.
Most of the restart code is common with 64s, so with more correctness
and performance testing this could be re-enabled again by adding the
extra soft-mask checks to interrupt handlers and flipping
exit_must_hard_disable().
Fixes: 9d1988ca87dd ("powerpc/64: treat low kernel text as irqs soft-masked")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-4-npiggin@gmail.com
|
|
CONFIG_RELOCATABLE=y causes build warnings from unresolved relocations.
Fix these by using TOC addressing for these cases.
Commit 24d33ac5b8ff ("powerpc/64s: Make prom_init require RELOCATABLE")
caused some 64e configs to select RELOCATABLE resulting in these
warnings, but the underlying issue was already there.
This passes basic qemu testing.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-3-npiggin@gmail.com
|
|
The early bad fault or key fault test in do_hash_fault() ends up calling
into ___do_page_fault without having gone through an interrupt handler
wrapper (except the initial _RAW one). This can end up calling local irq
functions while the interrupt has not been reconciled, which will likely
cause crashes and it trips up on a later patch that adds more assertions.
pkey_exec_prot from selftests causes this path to be executed.
There is no real reason to run the in_nmi() test should be performed
before the key fault check. In fact if a perf interrupt in the hash
fault code did a stack walk that was made to take a key fault somehow
then running ___do_page_fault could possibly cause another hash fault
causing problems. Move the in_nmi() test first, and then do everything
else inside the regular interrupt handler function.
Fixes: 3a96570ffceb ("powerpc: convert interrupt handlers to use wrappers")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210630074621.2109197-2-npiggin@gmail.com
|
|
On SMP, setup_kuep() is also called from start_secondary() since
commit 86f46f343272 ("powerpc/32s: Initialise KUAP and KUEP in C").
start_secondary() is not an __init function.
Remove the __init marker from setup_kuep() and bail out when
not caller on the first CPU as the work is already done.
Fixes: 10248dcba120 ("powerpc/44x: Implement Kernel Userspace Exec Protection (KUEP)")
Fixes: 86f46f343272 ("powerpc/32s: Initialise KUAP and KUEP in C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ee05934288994a65743a987acb1558f12c0c8c1.1624969450.git.christophe.leroy@csgroup.eu
|
|
On SMP, setup_kup() is also called from start_secondary().
start_secondary() is not an __init function.
Remove the __init marker from setup_kuep() and setup_kuap().
Fixes: 86f46f343272 ("powerpc/32s: Initialise KUAP and KUEP in C")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42f4bd12b476942e4d5dc81c0e839d8871b20b1c.1624863319.git.christophe.leroy@csgroup.eu
|
|
SPI NOR core changes:
- Ability to dump SFDP tables via sysfs
- Support for erasing OTP regions on Winbond and similar flashes
- Few API doc updates and fixes
- Locking support for MX25L12805D
SPI NOR controller drivers changes:
- Use SPI_MODE_X_MASK in nxp-spifi
- Intel Alder Lake-M SPI serial flash support
|
|
Pick up a fix for a warning that several people reported.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
radeon_ttm_bo_destroy() is attempting to access the resource object to
update memory counters. However, the resource object is already freed when
ttm calls this function via the destroy callback. This causes an oops when
a bo is freed:
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:radeon_ttm_bo_destroy+0x2c/0x100 [radeon]
Call Trace:
radeon_bo_unref+0x1a/0x30 [radeon]
radeon_gem_object_free+0x33/0x50 [radeon]
drm_gem_object_release_handle+0x69/0x70 [drm]
drm_gem_handle_delete+0x62/0xa0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
drm_ioctl_kernel+0xb2/0xf0 [drm]
drm_ioctl+0x30a/0x3c0 [drm]
? drm_mode_destroy_dumb+0x40/0x40 [drm]
radeon_drm_ioctl+0x49/0x80 [radeon]
__x64_sys_ioctl+0x8e/0xd0
Avoid the issue by updating the counters in the delete_mem_notify callback
instead. Also, fix memory statistic updating in radeon_bo_move() to
identify the source type correctly. The source type needs to be saved
before the move, because the moved from object may be altered by the move.
Fixes: bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210624045121.15643-1-mikel@mikelr.com
|
|
When unused memory map is freed the preserved part of the memory map is
extended to match pageblock boundaries because lots of core mm
functionality relies on homogeneity of the memory map within pageblock
boundaries.
Since pfn_valid() is used to check whether there is a valid memory map
entry for a PFN, make it return true also for PFNs that have memory map
entries even if there is no actual memory populated there.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Tony Lindgren <tony@atomide.com>
|
|
There maybe an overflow in memblock_overlaps_region() if it is called with
base and size such that
base + size > PHYS_ADDR_MAX
Make sure that memblock_overlaps_region() caps the size to prevent such
overflow and remove now duplicated call to memblock_cap_size() from
memblock_is_region_reserved().
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
|
|
When CONFIG_SPARSEMEM=y the ranges of the memory map that are freed are not
aligned to the pageblock boundaries which breaks assumptions about
homogeneity of the memory map throughout core mm code.
Make sure that the freed memory map is always aligned on pageblock
boundaries regardless of the memory model selection.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
|
|
The code that frees unused memory map uses rounds start and end of the
holes that are freed to MAX_ORDER_NR_PAGES to preserve continuity of the
memory map for MAX_ORDER regions.
Lots of core memory management functionality relies on homogeneity of the
memory map within each pageblock which size may differ from MAX_ORDER in
certain configurations.
Although currently, for the architectures that use free_unused_memmap(),
pageblock_order and MAX_ORDER are equivalent, it is cleaner to have common
notation thought mm code.
Replace MAX_ORDER_NR_PAGES with pageblock_nr_pages and update the comments
to make it more clear why the alignment to pageblock boundaries is
required.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
|
|
- patch series that ensures that hid-multitouch driver disables touch and
button-press reporting on hid-mt devices during suspend when the device is
not configured as a wakeup-source, from Hans de Goede
|
|
- support for LCD menu keys + LCD brightness control on the Logitech Z-10
speakers (with LCD) which use the same protocol as the G15 keyboards
from Hans de Goede
|
