summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-26mm/hmm: add missing call to hmm_pte_need_fault in HMM_PFN_SPECIAL handlingJason Gunthorpe
Currently if a special PTE is encountered hmm_range_fault() immediately returns EFAULT and sets the HMM_PFN_SPECIAL error output (which nothing uses). EFAULT should only be returned after testing with hmm_pte_need_fault(). Also pte_devmap() and pte_special() are exclusive, and there is no need to check IS_ENABLED, pte_special() is stubbed out to return false on unsupported architectures. Fixes: 992de9a8b751 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem") Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: return -EFAULT when setting HMM_PFN_ERROR on requested valid pagesJason Gunthorpe
hmm_range_fault() should never return 0 if the caller requested a valid page, but the pfns output for that page would be HMM_PFN_ERROR. hmm_pte_need_fault() must always be called before setting HMM_PFN_ERROR to detect if the page is in faulting mode or not. Fix two cases in hmm_vma_walk_pmd() and reorganize some of the duplicated code. Fixes: d08faca018c4 ("mm/hmm: properly handle migration pmd") Fixes: da4c3c735ea4 ("mm/hmm/mirror: helper to snapshot CPU page table") Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: reorganize how !pte_present is handled in hmm_vma_handle_pte()Jason Gunthorpe
The intention with this code is to determine if the caller required the pages to be valid, and if so, then take some action to make them valid. The action varies depending on the page type. In all cases, if the caller doesn't ask for the page, then hmm_range_fault() should not return an error. Revise the implementation to be clearer, and fix some bugs: - hmm_pte_need_fault() must always be called before testing fault or write_fault otherwise the defaults of false apply and the if()'s don't work. This was missed on the is_migration_entry() branch - -EFAULT should not be returned unless hmm_pte_need_fault() indicates fault is required - ie snapshotting should not fail. - For !pte_present() the cpu_flags are always 0, except in the special case of is_device_private_entry(), calling pte_to_hmm_pfn_flags() is confusing. Reorganize the flow so that it always follows the pattern of calling hmm_pte_need_fault() and then checking fault || write_fault. Fixes: 2aee09d8c116 ("mm/hmm: change hmm_vma_fault() to allow write fault on page basis") Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: add missing call to hmm_range_need_fault() before returning EFAULTJason Gunthorpe
All return paths that do EFAULT must call hmm_range_need_fault() to determine if the user requires this page to be valid. If the page cannot be made valid if the user later requires it, due to vma flags in this case, then the return should be HMM_PFN_ERROR. Fixes: a3e0d41c2b1f ("mm/hmm: improve driver API to work and wait over a range") Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: add missing pfns set to hmm_vma_walk_pmd()Jason Gunthorpe
All success exit paths from the walker functions must set the pfns array. A migration entry with no required fault is a HMM_PFN_NONE return, just like the pte case. Fixes: d08faca018c4 ("mm/hmm: properly handle migration pmd") Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: do not call hmm_vma_walk_hole() while holding a spinlockJason Gunthorpe
This eventually calls into handle_mm_fault() which is a sleeping function. Release the lock first. hmm_vma_walk_hole() does not touch the contents of the PUD, so it does not need the lock. Fixes: 3afc423632a1 ("mm: pagewalk: add p4d_entry() and pgd_entry()") Cc: Steven Price <steven.price@arm.com> Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26mm/hmm: add missing unmaps of the ptep during hmm_vma_handle_pte()Jason Gunthorpe
Many of the direct returns of error skipped doing the pte_unmap(). All non zero exit paths must unmap the pte. The pte_unmap() is split unnaturally like this because some of the error exit paths trigger a sleep and must release the lock before sleeping. Fixes: 992de9a8b751 ("mm/hmm: allow to mirror vma of a file on a DAX backed filesystem") Fixes: 53f5c3f489ec ("mm/hmm: factor out pte and pmd handling to simplify hmm_vma_walk_pmd()") Reviewed-by: Ralph Campbell <rcampbell@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-26drm/i915/display: Fix mode private_flags comparison at atomic_checkUma Shankar
This patch fixes the private_flags of mode to be checked and compared against uapi.mode and not from hw.mode. This helps properly trigger modeset at boot if desired by driver. It helps resolve audio_codec initialization issues if display is connected at boot. Initial discussion on this issue has happened on below thread: https://patchwork.freedesktop.org/series/74828/ v2: No functional change. Fixed the Closes tag and added Maarten's RB. v3: Added Fixes tag. Cc: Ville Syrjä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Souza, Jose <jose.souza@intel.com> Fixes: 58d124ea2739 ("drm/i915: Complete crtc hw/uapi split, v6.") Closes: https://gitlab.freedesktop.org/drm/intel/issues/1363 Suggested-by: Ville Syrjä <ville.syrjala@linux.intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: SweeAun Khor <swee.aun.khor@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200326125111.11081-1-uma.shankar@intel.com (cherry picked from commit d5e56705927e00f703b2eb5a98299dd6622d16e5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-03-26drm/i915/gt: Stage the transfer of the virtual breadcrumbChris Wilson
We move the virtual breadcrumb from one physical engine to the next, if the next virtual request is scheduled on a new physical engine. Since the virtual context can only be in one signal queue, we need it to track the current physical engine for the new breadcrumbs. However, to move the list we need both breadcrumb locks -- and since we cannot take both at the same time (unless we are careful and always ensure consistent ordering) stage the movement of the signaler via the current virtual request. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1510 Fixes: 6d06779e8672 ("drm/i915: Load balancing across a virtual engine") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200325130059.30600-1-chris@chris-wilson.co.uk (cherry picked from commit 6c81e21a4742385c00713137c6fdcade0412e93c) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-03-26drm/i915/gt: Select the deepest available parking mode for rc6Chris Wilson
On Ivybridge, we can go lower than rc6 to rc6p. And this is required for Ivybridge to hit the same minimum power consumption as rc6 on other platforms, so make it so. v2: Update selftest to include all rc6 residency counters Note that Andi did mention that we should be converting the magic numbers into opaque magic macros, so if they ever get reused (unlikely given only Ivybridge used the extra modes) we'll need to pay back the technical debt. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1518 Fixes: 730eaeb52426 ("drm/i915/gt: Manual rc6 entry upon parking") Testcase: igt/i915_pm_rc6_residency/rc6-idle Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200324134232.8773-1-chris@chris-wilson.co.uk (cherry picked from commit 13c5a577b342d80ea06b7300ce69420a2d0928ca) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-03-26drm/i915: Avoid live-lock with i915_vma_parked()Chris Wilson
Abuse^W Take advantage that we know we are inside the GT wakeref and that prevents any client execbuf from reopening the i915_vma in order to claim all the vma to close without having to drop the spinlock to free each one individually. By keeping the spinlock, we do not have to restart if we run concurrently with i915_gem_free_objects -- which causes them both to restart continually and make very very slow progress. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1361 Fixes: 77853186e547 ("drm/i915: Claim vma while under closed_lock in i915_vma_parked()") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200323092841.22240-2-chris@chris-wilson.co.uk (cherry picked from commit 3447c4c55d0edc95742fdcd91c3efb050546b907) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-03-26drm/i915/gt: Treat idling as a RPS downclock eventChris Wilson
If we park/unpark faster than we can respond to RPS events, we never will process a downclock event after expiring a waitboost, and thus we will forever restart the GPU at max clocks even if the workload switches and doesn't justify full power. Closes: https://gitlab.freedesktop.org/drm/intel/issues/1500 Fixes: 3e7abf814193 ("drm/i915: Extract GT render power state management") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200322163225.28791-1-chris@chris-wilson.co.uk Cc: <stable@vger.kernel.org> # v5.5+ (cherry picked from commit 21abf0bf168dffff1192e0f072af1dc74ae1ff0e) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-03-26drm/i915/gt: Cancel a hung context if already closedChris Wilson
Use the restored ability to check if a context is closed to decide whether or not to immediately ban the context from further execution after a hang. Fixes: be90e344836a ("drm/i915/gt: Cancel banned contexts after GT reset") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-2-chris@chris-wilson.co.uk (cherry picked from commit 8e37d699139128139c0468e005c2f0d6215b0c55) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-03-26drm/i915: Use explicit flag to mark unreachable intel_contextChris Wilson
I need to keep the GEM context around a bit longer so adding an explicit flag for syncing execbuf with closed/abandonded contexts. v2: * Use already available context flags. (Chris) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200319170707.8262-1-chris@chris-wilson.co.uk (cherry picked from commit 207e4a71fb53e761be72daaeb78a49225bc31c69) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2020-03-26Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v5.7. Major changes: ath11k * handle RX fragments * enable PN offload * add support for HE BSS color
2020-03-26ata: make "libata.force" kernel parameter optionalBartlomiej Zolnierkiewicz
Add ATA_FORCE config option (visible only if EXPERT config option is enabled) and make "libata.force" kernel parameter optional. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename w/ CONFIG_ATA_FORCE=y: 31983 572 40 32595 7f53 drivers/ata/libata-core.o w/ CONFIG_ATA_FROCE=n: 28958 316 32 29306 727a drivers/ata/libata-core.o Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.cBartlomiej Zolnierkiewicz
* move ata_eh_analyze_ncq_error() and ata_eh_read_log_10h() to libata-sata.c * add static inline for ata_eh_analyze_ncq_error() for CONFIG_SATA_HOST=n case (link->sactive is non-zero only if NCQ commands are actually queued so empty function body is sufficient) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o after: 15446 18 0 15464 3c68 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-eh.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-eh.c: * move sata_async_notification() to libata-sata.c: Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 16243 18 0 16261 3f85 drivers/ata/libata-eh.o after: 16164 18 0 16182 3f36 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_sas_*() to libata-sata.cBartlomiej Zolnierkiewicz
* un-inline: - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * un-static: - ata_scsi_sdev_config() - ata_scsi_dev_config() - ata_scsi_dump_cdb() - __ata_scsi_queuecmd() * move ata_sas_*() to libata-sata.c: * add static inlines for CONFIG_SATA_HOST=n case for ata_sas_{allocate,free}_tag() Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o after: 18330 23 576 18929 49f1 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-scsi.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-scsi.c: * un-static ata_scsi_find_dev() * move following code to libata-sata.c: - SATA only sysfs device attributes handling - __ata_change_queue_depth() - ata_scsi_change_queue_depth() * cover with CONFIG_SATA_HOST ifdef SATA only sysfs device attributes handling code and ATA_SHT_NCQ() macro in <linux/libata.h> Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20702 105 576 21383 5387 drivers/ata/libata-scsi.o after: 19137 23 576 19736 4d18 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_deb_timing_*() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_deb_timing_*() to libata-sata.c * add static inline for sata_ehc_deb_timing() for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32158 572 40 32770 8002 drivers/ata/libata-core.o after: 32015 572 40 32627 7f73 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move ata_qc_complete_multiple() to libata-sata.cBartlomiej Zolnierkiewicz
* move ata_qc_complete_multiple() to libata-sata.c Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32559 572 40 33171 8193 drivers/ata/libata-core.o after: 32162 572 40 32774 8006 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_hardreset() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_link_hardreset() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case * make sata_set_spd_needed() static Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32724 572 40 33336 8238 drivers/ata/libata-core.o after: 32559 572 40 33171 8193 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_link_{debounce,resume}() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_link_{debounce,resume}() to libata-sata.c * add static inline for CONFIG_SATA_HOST=n case (only one, for sata_link_resume() is needed) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32816 572 40 33428 8294 drivers/ata/libata-core.o after: 32724 572 40 33336 8238 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move *sata_set_spd*() to libata-sata.cBartlomiej Zolnierkiewicz
* move *sata_set_spd*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 32842 572 40 33458 82ae drivers/ata/libata-core.o after: 32812 572 40 33428 8290 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move sata_scr_*() to libata-sata.cBartlomiej Zolnierkiewicz
* move sata_scr_*() to libata-sata.c * add static inlines for CONFIG_SATA_HOST=n case Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 35642 572 40 36254 8d9e drivers/ata/libata-core.o 16607 18 0 16625 40f1 drivers/ata/libata-eh.o after: 32846 572 40 33458 82b2 drivers/ata/libata-core.o 16243 18 0 16261 3f85 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: start separating SATA specific code from libata-core.cBartlomiej Zolnierkiewicz
Start separating SATA specific code from libata-core.c: * move following functions to libata-sata.c: - ata_tf_to_fis() - ata_tf_from_fis() - sata_link_scr_lpm() - ata_slave_link_init() - sata_lpm_ignore_phy_events() * group above functions together in <linux/libata.h> * include libata-sata.c in the build when CONFIG_SATA_HOST=y Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36762 572 40 37374 91fe drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hostsBartlomiej Zolnierkiewicz
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_eh_set_lpm() to allow compiler to optimize out the function for non-SATA configs (for PATA hosts "ap && !ap->ops->set_lpm" condition is always true so it's sufficient for the function to return zero). Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 17353 18 0 17371 43db drivers/ata/libata-eh.o after: 16607 18 0 16625 40f1 drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hostsBartlomiej Zolnierkiewicz
Add !IS_ENABLED(CONFIG_SATA_HOST) to ata_dev_config_ncq() to allow compiler to optimize out the function for non-SATA configs. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37582 572 40 38194 9532 drivers/ata/libata-core.o after: 36462 572 40 37074 90d2 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled()Bartlomiej Zolnierkiewicz
When CONFIG_SATA_HOST=n there are no NCQ capable host drivers built so it is safe to hardwire ata_ncq_enabled() to always return zero. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 37820 572 40 38432 9620 drivers/ata/libata-core.o 21040 105 576 21721 54d9 drivers/ata/libata-scsi.o 17405 18 0 17423 440f drivers/ata/libata-eh.o after: 37582 572 40 38194 9532 drivers/ata/libata-core.o 20702 105 576 21383 5387 drivers/ata/libata-scsi.o 17353 18 0 17371 43db drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: separate PATA timings code from libata-core.cBartlomiej Zolnierkiewicz
Separate PATA timings code from libata-core.c: * add PATA_TIMINGS config option and make corresponding PATA host drivers (and ATA ACPI code) select it * move following PATA timings code to libata-pata-timings.c: - ata_timing_quantize() - ata_timing_merge() - ata_timing_find_mode() - ata_timing_compute() * group above functions together in <linux/libata.h> * include libata-pata-timings.c in the build when PATA_TIMINGS config option is enabled * cover ata_timing_cycle2mode() with CONFIG_ATA_ACPI ifdef (it depends on code from libata-core.c and libata-pata-timings.c while its only user is ATA ACPI) Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39688 573 40 40301 9d6d drivers/ata/libata-core.o after: 37820 572 40 38432 9620 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: fix CodingStyle issues in PATA timings codeBartlomiej Zolnierkiewicz
* fix the overly long line in ata_timing_quantize() * use standard kernel CodingStyle in ata_timing_merge() * do not use assignment in if condition in ata_timing_compute() * fix non-standard comment style in ata_timing_compute() Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: remove EXPORT_SYMBOL_GPL()s not used by modulesBartlomiej Zolnierkiewicz
Remove EXPORT_SYMBOL_GPL()s for functions used only by the core libata code. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 39838 573 40 40451 9e03 drivers/ata/libata-core.o 21071 105 576 21752 54f8 drivers/ata/libata-scsi.o 17519 18 0 17537 4481 drivers/ata/libata-eh.o after: 39688 573 40 40301 9d6d drivers/ata/libata-core.o 21040 105 576 21721 54d9 drivers/ata/libata-scsi.o 17405 18 0 17423 440f drivers/ata/libata-eh.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: move EXPORT_SYMBOL_GPL()s close to exported codeBartlomiej Zolnierkiewicz
Move EXPORT_SYMBOL_GPL()s close to exported code like it is done in other kernel subsystems. As a nice side effect this results in the removal of few ifdefs. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize ata_scsi_rbuf[] sizeBartlomiej Zolnierkiewicz
Currently the maximum required size of the ata_scsi_rbuf[] is 576 bytes in ata_scsiop_inq_89() so modify ATA_SCSI_RBUF_SIZE define accordingly. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20782 105 4096 24983 6197 drivers/ata/libata-scsi.o after: 20782 105 576 21463 53d7 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: optimize struct ata_force_param sizeBartlomiej Zolnierkiewicz
Optimize struct ata_force_param size by: - using u8 for cbl and spd_limit fields - using u16 for lflags field Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 573 40 41677 a2cd drivers/ata/libata-core.o after: 40654 573 40 41267 a133 drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] sizeBartlomiej Zolnierkiewicz
Use COMMAND_LINE_SIZE instead PAGE_SIZE for ata_force_param_buf[] size as libata parameters buffer doesn't need to be bigger than the command line buffer. For many architectures this results in decreased libata-core.o size (COMMAND_LINE_SIZE varies from 256 to 4096 while the minimum PAGE_SIZE is 4096). Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 41064 4413 40 45517 b1cd drivers/ata/libata-core.o after: 41064 573 40 41677 a2cd drivers/ata/libata-core.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: simplify ata_scsiop_inq_89()Bartlomiej Zolnierkiewicz
Initialize rbuf[] directly instead of using ata_tf_to_fis(). This results in simpler and smaller code. It also allows separating ata_tf_to_fis() into SATA specific libata part in the future. Code size savings on m68k arch using (modified) atari_defconfig: text data bss dec hex filename before: 20824 105 4096 25025 61c1 drivers/ata/libata-scsi.o after: 20782 105 4096 24983 6197 drivers/ata/libata-scsi.o Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26sata_promise: use ata_cable_sata()Bartlomiej Zolnierkiewicz
Use core helper instead of open-coding it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: make SATA_PMP option selectable only if any SATA host driver is enabledBartlomiej Zolnierkiewicz
There is no reason to expose SATA_PMP config option when no SATA host drivers are enabled. To fix it add SATA_HOST config option, make all SATA host drivers select it and finally make SATA_PMP config options depend on it. This also serves as preparation for the future changes which optimize libata core code size on PATA only setups. CC: "James E.J. Bottomley" <jejb@linux.ibm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # for SCSI bits Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hostsBartlomiej Zolnierkiewicz
There is no point in exposing ncq_enable_prio sysfs attribute for devices on PATA and non-NCQ capable SATA hosts so: * remove dev_attr_ncq_prio_enable from ata_common_sdev_attrs[] * add ata_ncq_sdev_attrs[] * update ATA_NCQ_SHT() macro to use ata_ncq_sdev_attrs[] Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26ata: remove stale maintainership information from core codeBartlomiej Zolnierkiewicz
In commit 7634ccd2da97 ("libata: maintainership update") from 2018 Jens has officially taken over libata maintainership from Tejun so remove stale information from core libata code. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-26staging: wilc1000: Use crc7 in lib/ rather than a private copyGeorge Spelvin
The code in lib/ is the desired polynomial, and even includes the 1-bit left shift in the table rather than needing to code it explicitly. While I'm in Kconfig, add a description of what a WILC1000 is. Kconfig questions that require me to look up a data sheet to find out that I probably don't have one are a pet peeve. Cc: Adham Abozaeid <adham.abozaeid@microchip.com> Cc: linux-wireless@vger.kernel.org Reviewed-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200326152251.19094-1-ajay.kathat@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_alert().Sam Muhammed
Replace printk(KERN_ALERT ...) with netdev_alert() when a network device is available. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/70e8781cd2a9512cb6b3c42400a10323f3024f3c.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_info() with network devices.Sam Muhammed
netdev_info() should be used instead of printk(KERN_INFO ...) since it's specific to and preferable for printing messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/ce20980cc1947255b8a2de3c1f1364c11c163b9e.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices.Sam Muhammed
Use netdev_warn() over printk(). netdev_warn() is specific for printing warning messages for network devices, and preferable over printk(KERN_WARNING ...). Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/02fe0666cb737a3b0581081c9e7c179bfb820cac.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages.Sam Muhammed
Replace printk(KERN_DEBUG ...) with netdev_dbg() across the driver. since netdev_dbg() is preferable and specific for printing debug messages for network devices. Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com> Link: https://lore.kernel.org/r/84dc7e33954509457efce2a35fb293e631845a96.1585233434.git.jane.pnx9@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-26xfs: prohibit fs freezing when using empty transactionsDarrick J. Wong
I noticed that fsfreeze can take a very long time to freeze an XFS if there happens to be a GETFSMAP caller running in the background. I also happened to notice the following in dmesg: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs] Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs] CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs] Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54 RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000 R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8 FS: 00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0 Call Trace: xfs_fs_freeze+0x25/0x40 [xfs] freeze_super+0xc8/0x180 do_vfs_ioctl+0x70b/0x750 ? __fget_files+0x135/0x210 ksys_ioctl+0x3a/0xb0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe These two things appear to be related. The assertion trips when another thread initiates a fsmap request (which uses an empty transaction) after the freezer waited for m_active_trans to hit zero but before the the freezer executes the WARN_ON just prior to calling xfs_log_quiesce. The lengthy delays in freezing happen because the freezer calls xfs_wait_buftarg to clean out the buffer lru list. Meanwhile, the GETFSMAP caller is continuing to grab and release buffers, which means that it can take a very long time for the buffer lru list to empty out. We fix both of these races by calling sb_start_write to obtain freeze protection while using empty transactions for GETFSMAP and for metadata scrubbing. The other two users occur during mount, during which time we cannot fs freeze. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2020-03-26xfs: shutdown on failure to add page to log bioBrian Foster
If the bio_add_page() call fails, we proceed to write out a partially constructed log buffer. This corrupts the physical log such that log recovery is not possible. Worse, persistent occurrences of this error eventually lead to a BUG_ON() failure in bio_split() as iclogs wrap the end of the physical log, which triggers log recovery on subsequent mount. Rather than warn about writing out a corrupted log buffer, shutdown the fs as is done for any log I/O related error. This preserves the consistency of the physical log such that log recovery succeeds on a subsequent mount. Note that this was observed on a 64k page debug kernel without upstream commit 59bb47985c1d ("mm, sl[aou]b: guarantee natural alignment for kmalloc(power-of-two)"), which demonstrated frequent iclog bio overflows due to unaligned (slab allocated) iclog data buffers. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-26xfs: directory bestfree check should release buffersDarrick J. Wong
When we're checking bestfree information in directory blocks, always drop the block buffer at the end of the function. We should always release resources when we're done using them. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-19 07:54:05 +0000