summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-08-25clk: tegra: Fix some static checker problemsStephen Boyd
The latest Tegra clk pull had some problems. Fix them. drivers/clk/tegra/clk-tegra124.c:1450:6: warning: symbol 'tegra124_clock_assert_dfll_dvco_reset' was not declared. Should it be static? drivers/clk/tegra/clk-tegra124.c:1466:6: warning: symbol 'tegra124_clock_deassert_dfll_dvco_reset' was not declared. Should it be static? drivers/clk/tegra/clk-tegra124.c:1476:5: warning: symbol 'tegra124_reset_assert' was not declared. Should it be static? drivers/clk/tegra/clk-tegra124.c:1486:5: warning: symbol 'tegra124_reset_deassert' was not declared. Should it be static? drivers/clk/tegra/clk-dfll.c:590 dfll_load_i2c_lut() warn: inconsistent indenting drivers/clk/tegra/clk-dfll.c:1448 dfll_build_i2c_lut() warn: unsigned 'td->i2c_lut[0]' is never less than zero. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-25r8169: Add values missing in @get_stats64 from HW countersCorinna Vinschen
The r8169 driver collects statistical information returned by @get_stats64 by counting them in the driver itself, even though many (but not all) of the values are already collected by tally counters (TCs) in the NIC. Some of these TC values are not returned by @get_stats64. Especially the received multicast packages are missing from /proc/net/dev. Rectify this by fetching the TCs and returning them from rtl8169_get_stats64. The counters collected in the driver obviously disappear as soon as the driver is unloaded so after a driver is loaded the counters always start at 0. The TCs on the other hand are only reset by a power cycle. Without further considerations the values collected by the driver would not match up against the TC values. This patch introduces a new function rtl8169_reset_counters which resets the TCs. Also, since rtl8169_reset_counters shares most of its code with rtl8169_update_counters, refactor the shared code into two new functions rtl8169_map_counters and rtl8169_unmap_counters. Unfortunately chip versions prior to RTL_GIGA_MAC_VER_19 don't allow to reset the TCs programatically. Therefore introduce an addition to the rtl8169_private struct and a function rtl8169_init_counter_offsets to store the TCs at first rtl_open. Use these values as offsets in rtl8169_get_stats64. Propagate a failure to reset *and* update the counters up to rtl_open and emit a warning message, if so. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25Merge tag 'tegra-for-4.3-clk' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next clk: tegra: Changes for v4.3-rc1 This contains the DFLL driver needed to implement CPU frequency scaling on Tegra.
2015-08-25rds: Fix improper gfp_t usage.David S. Miller
>> net/rds/ib_recv.c:382:28: sparse: incorrect type in initializer (different base types) net/rds/ib_recv.c:382:28: expected int [signed] can_wait net/rds/ib_recv.c:382:28: got restricted gfp_t net/rds/ib_recv.c:828:23: sparse: cast to restricted __le64 Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25MAINTAINERS: update vmxnet3 driver maintainerShrikrishna Khare
Shreyas Bhatewara would no longer maintain the vmxnet3 driver. Taking over the role of vmxnet3 maintainer. Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25ip6_gre: release cached dst on tunnel removalhuaibin Wang
When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <xeb@mail.ru> Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: huaibin Wang <huaibin.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25vxlan: fix multiple inclusion of vxlan.hJiri Benc
The vxlan_get_sk_family inline function was added after the last #endif, making multiple inclusion of net/vxlan.h fail. Move it to the proper place. Reported-by: Mark Rustad <mark.d.rustad@intel.com> Fixes: 705cc62f6728c ("vxlan: provide access function for vxlan socket address family") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25MAINTAINERS: Add VRF entryDavid Ahern
Add entry for new VRF device driver. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25route: fix a use-after-freeWANG Cong
This patch fixes the following crash: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc7+ #166 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88010656d280 ti: ffff880106570000 task.ti: ffff880106570000 RIP: 0010:[<ffffffff8182f91b>] [<ffffffff8182f91b>] dst_destroy+0xa6/0xef RSP: 0018:ffff880107603e38 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff8800d225a000 RCX: ffffffff82250fd0 RDX: 0000000000000001 RSI: ffffffff82250fd0 RDI: 6b6b6b6b6b6b6b6b RBP: ffff880107603e58 R08: 0000000000000001 R09: 0000000000000001 R10: 000000000000b530 R11: ffff880107609000 R12: 0000000000000000 R13: ffffffff82343c40 R14: 0000000000000000 R15: ffffffff8182fb4f FS: 0000000000000000(0000) GS:ffff880107600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fcabd9d3000 CR3: 00000000d7279000 CR4: 00000000000006e0 Stack: ffffffff82250fd0 ffff8801077d6f00 ffffffff82253c40 ffff8800d225a000 ffff880107603e68 ffffffff8182fb5d ffff880107603f08 ffffffff810d795e ffffffff810d7648 ffff880106574000 ffff88010656d280 ffff88010656d280 Call Trace: <IRQ> [<ffffffff8182fb5d>] dst_destroy_rcu+0xe/0x1d [<ffffffff810d795e>] rcu_process_callbacks+0x618/0x7eb [<ffffffff810d7648>] ? rcu_process_callbacks+0x302/0x7eb [<ffffffff8182fb4f>] ? dst_gc_task+0x1eb/0x1eb [<ffffffff8107e11b>] __do_softirq+0x178/0x39f [<ffffffff8107e52e>] irq_exit+0x41/0x95 [<ffffffff81a4f215>] smp_apic_timer_interrupt+0x34/0x40 [<ffffffff81a4d5cd>] apic_timer_interrupt+0x6d/0x80 <EOI> [<ffffffff8100b968>] ? default_idle+0x21/0x32 [<ffffffff8100b966>] ? default_idle+0x1f/0x32 [<ffffffff8100bf19>] arch_cpu_idle+0xf/0x11 [<ffffffff810b0bc7>] default_idle_call+0x1f/0x21 [<ffffffff810b0dce>] cpu_startup_entry+0x1ad/0x273 [<ffffffff8102fe67>] start_secondary+0x135/0x156 dst is freed right before lwtstate_put(), this is not correct... Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry") Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25net-next: Fix warning while make xmldocs caused by skbuff.cMasanari Iida
This patch fix following warnings. .//net/core/skbuff.c:407: warning: No description found for parameter 'len' .//net/core/skbuff.c:407: warning: Excess function parameter 'length' description in '__netdev_alloc_skb' .//net/core/skbuff.c:476: warning: No description found for parameter 'len' .//net/core/skbuff.c:476: warning: Excess function parameter 'length' description in '__napi_alloc_skb' Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25ACPICA: Update version to 20150818Bob Moore
ACPICA commit d93470de8febeecdc20633fde11cb0b200fa773b Version 20150818. Link: https://github.com/acpica/acpica/commit/d93470de Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Debugger: Cleanup debugging outputs to dump name path without ↵Lv Zheng
trailing underscores ACPICA commit 51a49c2fb4a73f302a6df2b8ddc1350dd261684d It is better to use unified ASL path name to interact with the developers. There are following acpi_ns_build_normalized_pathname() users invoking it for debugging purposes (acpiexec test results are attached): 1. acpi_ut_display_init_pathname (acpi_ns_handle_to_pathname): --------------------------------------------- Initializing Region \_SB.H_EC.ECF2 --------------------------------------------- 2. acpi_ns_print_node_pathname (acpi_ns_handle_to_pathname): --------------------------------------------- - ex \_SB.H_EC._STA Evaluating \_SB.H_EC._STA --------------------------------------------- 3. acpi_ds_print_node_pathname (acpi_ns_handle_to_pathname): --------------------------------------------- - level 211b console - execute \M1 ... **** Exception AE_AML_UNINITIALIZED_ARG during execution of method [\M1] (Node 009CB6B8) --------------------------------------------- 4. acpi_ex_dump_reference_obj (acpi_ns_handle_to_pathname): --------------------------------------------- - dump \_TZ.FAN4._PR0 ... [00] 00835E98 [Object Reference] Type [Named Object] 05 00828878 \_TZ.FN04 --------------------------------------------- 5. acpi_db_bus_walk (acpi_ns_handle_to_pathname): --------------------------------------------- - businfo \_SB.PCI0 Type 6 ... --------------------------------------------- 6. acpi_db_walk_and_match_name (acpi_ns_handle_to_pathname): --------------------------------------------- - find _PR0 \_TZ.FAN4._PR0 Package 002D8DF8 01 Elements 01 --------------------------------------------- 7. acpi_db_walk_for_specific_objects (acpi_ns_handle_to_pathname): --------------------------------------------- - methods ... \_SB.PCI0._PRT Method 0026D918 01 Args 0 Len 0005 Aml 0026B199 ... --------------------------------------------- 8. acpi_db_decode_and_dispaly_object (acpi_get_name): --------------------------------------------- - gpes Block 0 - Info 003AC7B0 device_node 003A0E08 [\_GPE] - FADT-defined GPE block ... --------------------------------------------- 9. acpi_db_display_gpes (acpi_get_name): --------------------------------------------- - dump \_GPE Object (003A0E08) Pathname: \_GPE --------------------------------------------- 10.ae_miscellaneous_tests (acpi_get_name): No output available This patch cleans up all of the above usages. ACPICA BZ 1178, Lv Zheng. Linux kernel's ACPICA debugging messages may also be changed. Link: https://github.com/acpica/acpica/commit/51a49c2f Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_verbose acpiexec usageLv Zheng
ACPICA commit 42d7ad7bfb1cfb95183c1386c77509f2036f521d When acpi_gbl_db_opt_verbose is used in acpi_dm_descending_op() (invoked by acpi_dm_disassemble()), it is actually exported by the disassembler but used by the debugger to distinguish the output of the disassembler for different debugger commands. It is by default TRUE but is set to FALSE for control method disassembly command - "disassemble". So it's initialization should be a part of the ACPI_DISASSEMBLER conditioned code. This patch uses ACPI_INIT_GLOBAL to achieve a clean manner so that when ACPI_DISASSEMBLER is not defined, ACPI_DEBUGGER conditioned code needn't link to this option. Since it is a disassembler exported variable, it is renamed to acpi_gbl_dm_opt_Verbose in this patch. As VERBOSE_PRINT() macro has only one user, this patch also removes the definition of this macro. Lv Zheng. This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/42d7ad7b Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_disasmLv Zheng
ACPICA commit 969989cf7f85e2a2a0cd048cd25fc706246a48a2 This patch cleans up the following global variable - acpi_gbl_db_opt_disasm: The setting is used to control the full disassembly feature for iasl. ACPI debugger (acpiexec) shall have nothing to do with it. Actually, acpiexec never links to ad_aml_disassemble(). This patch thus renames this global option to acpi_gbl_dm_opt_disasm and removes all acpiexec and debugger references on it. Lv Zheng. This patch doesn't affect Linux kernel. Link: https://github.com/acpica/acpica/commit/969989cf Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Debugger: Split debugger initialization/termination APIsLv Zheng
ACPICA commit 7a3f22baab000b186779dac64ad71d9776b8f432 It is likely that the debugger is enabled only when a userspace program explicitly tells a kernel to do so, so it shouldn't be initialized as early as current implementation. The only tool requiring ACPI_DEBUGGER is acpiexec, so acpiexec need to call the new APIs by itself. And BSD developers may also get notified to invoke the APIs for DDB enabling. Lv Zheng. This patch doesn't affect Linux kernel as debugger is currently not enabled in the Linux kernel. Link: https://github.com/acpica/acpica/commit/7a3f22ba Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Header support to improve compatibility with MSVCBob Moore
ACPICA commit 5b4087fba991d8383046b550bbe22f3d8d9b9c8f Needed to improve MSVC editor support for symbols. For Linux kernel, this change is a no-op. Link: https://github.com/acpica/acpica/commit/5b4087fb Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Make the max-number-of-loops runtime configurableBob Moore
ACPICA commit a9d9c2d0c2d077bb3175ec9c252cf0e5da3efd45 Was previously compile-time only. Add support option for acpiexec. Link: https://github.com/acpica/acpica/commit/a9d9c2d0 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Debugger: Add option to display namespace summary/countsBob Moore
ACPICA commit bba222c15c2ce79076eb3a5e9d4d5f7120db8a00 If "Objects" command is invoked with no arguments, the counts for each object type are displayed. Linux kernel is not affected by this commit as currently debugger is not enabled in the Linux kernel. Link: https://github.com/acpica/acpica/commit/bba222c1 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Add additional debug info/statementsBob Moore
ACPICA commit 74094ca9f51e2652a9b5f01722d8640a653cc75a For _REG methods and module-level code blocks. For acpiexec, add deletion of module-level blocks in case of an early abort. Link: https://github.com/acpica/acpica/commit/74094ca9 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Table handling: Cleanup and update debug output for toolsBob Moore
ACPICA commit 93862bd7a227543bc617d822ef5c4f8a5d68b519 Add output of table OEM ID along with signature to support lots of SSDTs. Cleanup use of table pointers. Link: https://github.com/acpica/acpica/commit/93862bd7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: acpiexec/acpinames: Support very large number of ACPI tablesBob Moore
ACPICA commit ca3bd4c5cdc39a9009280032adbbc20f34e94c47 Fix a couple of issues with >40 ACPI tables. Return exit error for acpinames to enable use with BIOS builds. The new exported function is used by acpinames. For Linux kernel, this change is a no-op. Link: https://github.com/acpica/acpica/commit/ca3bd4c5 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: acpinames: Add new options and wildcard supportBob Moore
ACPICA commit 0ecf5b5a41c3d2e09af48f0fdbc9ae784f631788 - Add wilcard support for input filenames. - Add -l option to load tables and exit, no display. This is useful for validation of the namespace during BIOS generation. - Add -x option for specifying debug level. Linux kernel is not affected by this commit. Link: https://github.com/acpica/acpica/commit/0ecf5b5a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Headers: Fix some comments, no functional changeBob Moore
ACPICA commit 539f8c03fe64305725bd85343e42f3b6c42aad14 A couple typos and long lines. Link: https://github.com/acpica/acpica/commit/539f8c03 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Tables: Cleanup to reduce FACS globalsLv Zheng
ACPICA commit 3f42ba76e2a0453976d3108296d5f656fdf2bd6e In this patch, FACS table mapping is also tuned a bit so that only the selected FACS table will be mapped by the OSPM (mapped on demand) and the FACS related global variables can be reduced. Lv Zheng. Link: https://github.com/acpica/acpica/commit/3f42ba76 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Tables: Fix global table list issues by removing fixed table indexesLv Zheng
ACPICA commit c0b38b4c3982c2336ee92a2a14716107248bd941 The fixed table indexes leave holes in the global table list: 1. One hole can be seen when there is only 1 FACS provided by the BIOS. 2. Tow holes can be seen when it is a reduced hardware platform. The holes do not break OSPMs but have broken ACPI debugger "tables" command. Also the "fixed table indexes" mechanism may make the descriptors of the standard tables installed earlier than DSDT to be overwritten by the descriptors of the fixed tables. For example, FACP disappears from the global table list after DSDT is installed. This patch fixes all above issues by removing the "fixed table indexes" mechanism which is too complicated to be maintained in a regression safe manner. After removal, the table loader will determine the indexes of the fixed tables. Lv Zheng. Link: https://github.com/acpica/acpica/commit/c0b38b4c Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Update info messages during ACPICA initBob Moore
ACPICA commit 4ccf8a1cc499ec8f00345f662a5887483980e1dd Small cleanup of messages. Link: https://github.com/acpica/acpica/commit/4ccf8a1c Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Disassembler: Update for new listing modeBob Moore
ACPICA commit 2ed09bb7619d25f5a5c065c33a8a775a6db3a856 ACPICA commit 2fefacf73825b0ec96bbfc4f70a256735b715d6c This mode emits AML code along with the ASL code. A new global was needed to ensure the listing mode is completely separate from the debugger verbose mode. Emits the correct AML offset for the AML code. The -l option now works for both the compiler and disassembler. Linux kernel is not affected by this commit. Link: https://github.com/acpica/acpica/commit/2fefacf7 Link: https://github.com/acpica/acpica/commit/2ed09bb7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Update parameter validation for data_table_region and load_tableBob Moore
ACPICA commit 51ab555e60b4a3de3cc4a846e86d0de255be441a Add additional validation for the table signature and the OEM strings. Eliminates buffer read overrun in data_table_region. ACPICA BZ 1184. Link: https://bugs.acpica.org/show_bug.cgi?id=1184 Link: https://github.com/acpica/acpica/commit/51ab555e Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Disassembler: Remove duplicate code in _PLD processing.Bob Moore
ACPICA commit 6d9c827b540837b6e54059e17756a06985e4a196 ACPICA BZ 1176. Link: https://bugs.acpica.org/show_bug.cgi?id=1176 Link: https://github.com/acpica/acpica/commit/6d9c827b Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ACPICA: Correctly cleanup after a ACPI table load failureBob Moore
ACPICA commit ed7769e832de6c7ba90615480d916c85fd100422 If a table load fails, delete all namespace objects created by the table, otherwise these objects will be uninitialized, causing problems later. This appears to be a very rare problem. Also handle the unitialized node problem to prevent possible faults. ACPICA BZ 1185. Link: https://github.com/acpica/acpica/commit/ed7769e8 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-08-25ppp: implement x-netns supportGuillaume Nault
Let packets move from one netns to the other at PPP encapsulation and decapsulation time. PPP units and channels remain in the netns in which they were originally created. Only the net_device may move to a different namespace. Cross netns handling is thus transparent to lower PPP layers (PPPoE, L2TP, etc.). PPP devices are automatically unregistered when their netns gets removed. So read() and poll() on the unit file descriptor will respectively receive EOF and POLLHUP. Channels aren't affected. Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25mtd: blkdevs: fix switch-bool compilation warningTomer Barletz
With gcc 5.1 I get: warning: switch condition has boolean value [-Wswitch-bool] Signed-off-by: Tomer Barletz <barletz@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-25net: sun4i-emac: Claim emac sramHans de Goede
Claim the emac sram ourselves, rather then relying on the bootloader having mapped the sram to the emac controller during boot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25inetpeer: remove dead codeDavid Ahern
Remove various inlined functions not referenced in the kernel. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25net/mlx5e: Avoid accessing NULL pointer at ndo_select_queueRana Shahout
To avoid multiply/division operations on the data path, we hold a {channel, tc}==>txq mapping table. We held this mapping table inside the channel object that is being destroyed upon some configuration operations (e.g MTU change). So in case ndo_select_queue occurs during such a configuration operation, it may access a NULL channel pointer, resulting in kernel panic. To fix this issue we moved the {channel, tc}==>txq mapping table outside the channel object so that it will be available also during such configuration operations. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25mtd: spi-nor: stop (ab)using struct spi_device_idRafał Miłecki
Using struct spi_device_id for storing list of flash devices comes from early SPI NOR framework days. Thanks to the commit 70f3ce0510af ("mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id") we can stop using spi_device_id and just switch to our own struct. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-25ah4: Fix error return in ah_input().David S. Miller
Noticed by Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25ah6: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25mlxsw: fix error return codeJulia Lawall
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25net: davinci_emac: fix error return codeJulia Lawall
Propagate error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25mtip32x: fix regression introduced by blk-mq per-hctx flushJeff Moyer
Hi, After commit f70ced091707 (blk-mq: support per-distpatch_queue flush machinery), the mtip32xx driver may oops upon module load due to walking off the end of an array in mtip_init_cmd. On initialization of the flush_rq, init_request is called with request_index >= the maximum queue depth the driver supports. For mtip32xx, this value is used to index into an array. What this means is that the driver will walk off the end of the array, and either oops or cause random memory corruption. The problem is easily reproduced by doing modprobe/rmmod of the mtip32xx driver in a loop. I can typically reproduce the problem in about 30 seconds. Now, in the case of mtip32xx, it actually doesn't support flush/fua, so I think we can simply return without doing anything. In addition, no other mq-enabled driver does anything with the request_index passed into init_request(), so no other driver is affected. However, I'm not really sure what is expected of drivers. Ming, what did you envision drivers would do when initializing the flush requests? Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-25Merge branch 'rds-assorted-bug-fixes'David S. Miller
Santosh Shilimkar says: ==================== RDS: Assorted bug fixes We would like to improve RDS upstream support and in that context, I started playing with it. But run into number of issues including as basic is RDS IB RDMA doesn't work. As part of the debug, I ended up creating the $subject series which has bunch of assorted fixes. At least with this series I can run RDS IB RDMA and other tests successfully. Some of these fixes have been done by Chris Meson, Andy Grover and Zach Brown while at Oracle. There are still more kinks with FMR and error handling and I plan to address them in a follow up series. Series generated against Linus's master(v4.2-rc-7) but also applies against next-next cleanly. Its tested on Oracle hardware with IB fabric for both bcopy as well as RDMA mode. I don't have access to iWARP hardware so any testing help on iWARP hardware appreciated. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: check for valid cm_id before initiating connectionsantosh.shilimkar@oracle.com
Connection could have been dropped while the route is being resolved so check for valid cm_id before initiating the connection. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: return EMSGSIZE for oversize requests before processing/queueingMukesh Kacker
rds_send_queue_rm() allows for the "current datagram" being queued to exceed SO_SNDBUF thresholds by checking bytes queued without counting in length of current datagram. (Since sk_sndbuf is set to twice requested SO_SNDBUF value as a kernel heuristic this is usually fine!) If this "current datagram" squeezing past the threshold is itself many times the size of the sk_sndbuf threshold itself then even twice the SO_SNDBUF does not save us and it gets queued but cannot be transmitted. Threads block and deadlock and device becomes unusable. The check for this datagram not exceeding SNDBUF thresholds (EMSGSIZE) is not done on this datagram as that check is only done if queueing attempt fails. (Datagrams that follow this datagram fail queueing attempts, go through the check and eventually trip EMSGSIZE error but zero length datagrams silently fail!) This fix moves the check for datagrams exceeding SNDBUF limits before any processing or queueing is attempted and returns EMSGSIZE early in the rds_sndmsg() code. This change also ensures that all datagrams get checked for exceeding SNDBUF/sk_sndbuf size limits and the large datagrams that exceed those limits do not get to rds_send_queue_rm() code for processing. Signed-off-by: Mukesh Kacker <mukesh.kacker@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: make sure rds_send_drop_to properly takes the m_rs_locksantosh.shilimkar@oracle.com
rds_send_drop_to() is used during socket tear down to find all the messages on the socket and flush them . It can race with the acking code unless it takes the m_rs_lock on each and every message. This plugs a hole where we didn't take m_rs_lock on any message that didn't have the RDS_MSG_ON_CONN set. Taking m_rs_lock avoids double frees and other memory corruptions as the ack code trusts the message m_rs pointer on a socket that had actually been freed. We must take m_rs_lock to access m_rs. Because of lock nesting and rs access, we also need to acquire rs_lock. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Don't destroy the rdma id until after we're done using itSantosh Shilimkar
During connection resets, we are destroying the rdma id too soon. We can't destroy it when it is still in use. So lets move rdma_destroy_id() after we clear the rings. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Fix assertion level from fatal to warningsantosh.shilimkar@oracle.com
Fix the asserion level since its not fatal and can be hit in normal execution paths. There is no need to take the system down. We keep the WARN_ON() to detect the condition if we get here with bad pages. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Make sure we do a signaled send for large-sendsantosh.shilimkar@oracle.com
WR(Work Requests )always generate a WC(Work Completion) with signaled send. Default RDS ib code is setup for un-signaled completion. Since RDS connction is persistent, we can end up sending the data even after large-send when the remote end is not active(for any reason). By doing a signaled send at least once per large-send, we can at least detect the problem in work completion handler there by avoiding sending more data to inactive remote. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: Mark message mapped before transmitsantosh.shilimkar@oracle.com
rds_send_xmit() marks the rds message map flag after xmit_[rdma/atomic]() which is clearly wrong. We need to maintain the ownership between transport and rds. Also take care of error path. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-25RDS: add a sock_destruct callback debug aidsantosh.shilimkar@oracle.com
This helps to detect the accidental processes/apps trying to destroy the RDS socket which they are sharing with other processes/apps. Reviewed-by: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-18 15:25:32 +0000