| Age | Commit message (Collapse) | Author |
|---|
|
If nvmet receives commands with metadata there is a continuous memory
leak of kmalloc-128 slab or more precisely bio->bi_integrity.
Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
each user of bio_init has to use bio_uninit as well. Otherwise the bio
integrity is not getting free. Nvmet uses bio_init for inline bios.
Uninit the inline bio to complete deallocation of integrity in bio.
Fixes: bf4c89fc8797 ("block: don't call bio_uninit from bio_endio")
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The blktests nvme/058 manifests an issue where the NVMe subsystem
kobject entry remains stale in sysfs, causing a failure during
subsequent NVMe module reloads[1]. Specifically, when attempting to
register a new NVMe subsystem, the driver encounters a kobejct name
collision because a stale kobject still exists. Though, please note
that nvme/058 doesn't report any failure and test case passes and
it's only during subsequent NVMe module reloads, the stale nvme sub-
system kobject entry in sysfs causes the observed symptom[1].
This issue stems from an imbalance in the get/put usage of the namespace
head (nshead) reference counter. The nshead holds a reference to the
associated NVMe subsystem. If the nshead reference is not properly
released, it prevents the cleanup of the subsystem's kobject, leaving
nvme subsystem stale entry behind in sysfs.
During the failure case, the last namespace path referencing a nshead
is removed, but the nshead reference was not released. This occurs
because the release logic currently only puts the nshead reference
when its state is LIVE. However, in configurations where ANA (Asymmetric
Namespace Access) is enabled, a namespace may be associated with an ANA
state that is neither optimized nor non-optimized. In this case, the
nshead may never transition to LIVE, and the corresponding nshead
reference is then never dropped. In fact nvme/058 associates some of
nvme namespaces to an inaccessible ANA state and with that nshead is
created but it's state is not transitioned to LIVE. So the current
logic would then causes nshead reference to be leaked for non-LIVE
states.
Another scenario, during namespace allocation, the driver first
allocates a nshead and then issues an Identify Namespace command. If
this command fails — which can happen in tests like nvme/058 that
rapidly enables and disables namespaces — we must release the reference
to the newly allocated nshead. However this reference release is
currently missing in the failure, causing a nshead reference leak.
To fix this, we now unconditionally release the nshead reference when
the last nvme path referencing to the nshead is removed, regardless of
the head’s state. Also during identify namespace failure case we now
properly release the nshead reference. So this ensures proper cleanup
of the nshead, and consequently, the NVMe subsystem and its associated
kobject.
This change prevents stale kobject entries from lingering in sysfs and
eliminates the module reload failures observed just after running
nvme/058.
[1] https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Reported-by: yi.zhang@redhat.com
Closes: https://lore.kernel.org/all/CAHj4cs8fOBS-eSjsd5LUBzy7faKXJtgLkCN+mDy_-ezCLLLq+Q@mail.gmail.com/
Fixes: 62188639ec16 ("nvme-multipath: introduce delayed removal of the multipath head node")
Tested-by: yi.zhang@redhat.com
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Fix an error in nvme_log_err_passthru() where cdw14 was incorrectly
printed twice instead of cdw15. This fix ensures accurate logging of
the full passthrough command payload.
Fixes: 9f079dda1433 ("nvme: allow passthru cmd error logging")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commit 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct
intel_display") added a to_intel_display(connector) call to
vlv_dphy_param_init() but when vlv_dphy_param_init() gets called
the connector object has not been initialized yet, so this leads
to a NULL pointer deref:
BUG: kernel NULL pointer dereference, address: 000000000000000c
...
Hardware name: ASUSTeK COMPUTER INC. T100TA/T100TA, BIOS T100TA.314 08/13/2015
RIP: 0010:vlv_dsi_init+0x4e6/0x1600 [i915]
...
Call Trace:
<TASK>
? intel_step_name+0x4be8/0x5c30 [i915]
intel_setup_outputs+0x2d6/0xbd0 [i915]
intel_display_driver_probe_nogem+0x13f/0x220 [i915]
i915_driver_probe+0x3d9/0xaf0 [i915]
Use to_intel_display(&intel_dsi->base) instead to fix this.
Fixes: 77ba0b856225 ("drm/i915/dsi: convert vlv_dsi.[ch] to struct intel_display")
Signed-off-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250626143317.101706-1-hansg@kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 0dc6bfb50a5d0759e726cd36a3d3b7529fd2a627)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Watchdog doesn't work on NXP ls1046ardb board because in commit
7c8ffc5555cb("arm64: dts: layerscape: remove big-endian for mmc nodes"),
it intended to remove the big-endian from mmc node, but the big-endian of
watchdog node is also removed by accident. So, add watchdog big-endian
property back.
In addition, add compatible string fsl,ls1046a-wdt, which allow big-endian
property.
Fixes: 7c8ffc5555cb ("arm64: dts: layerscape: remove big-endian for mmc nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The overshoot of MDIO, MDC, ENET1_TDx and ENET2_TDx is too high, so
reduce the drive strength of these pins.
Fixes: e3e8b199aff8 ("arm64: dts: imx95: Add imx95-15x15-evk support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The overshoot of MDIO, MDC and ENET1_TDx is too high, so reduce the drive
strength these pins.
Fixes: 025cf78938c2 ("arm64: dts: imx95-19x19-evk: add ENETC 0 support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The number of external channels is assumed to be a multiple of 10,
but this is not the case for IQS7222D. As a result, some CRx pins
are wrongly prevented from being assigned to some channels.
Address this problem by explicitly defining the number of external
channels for cases in which the number of external channels is not
equal to the total number of available channels.
Fixes: dd24e202ac72 ("Input: iqs7222 - add support for Azoteq IQS7222D")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/aGHVf6HkyFZrzTPy@nixie71
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
io_uring marks a request as dealing with a regular file on S_ISREG. This
drives things like retries on short reads or writes, which is generally
not expected on a regular file (or bdev). Applications tend to not
expect that, so io_uring tries hard to ensure it doesn't deliver short
IO on regular files.
However, a recent commit added S_IFREG to anonymous inodes. When
io_uring is used to read from various things that are backed by anon
inodes, like eventfd, timerfd, etc, then it'll now all of a sudden wait
for more data when rather than deliver what was read or written in a
single operation. This breaks applications that issue reads on anon
inodes, if they ask for more data than a single read delivers.
Add a check for !S_ANON_INODE as well before setting REQ_F_ISREG to
prevent that.
Cc: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/ghostty-org/ghostty/discussions/7720
Fixes: cfd86ef7e8e7 ("anon_inode: use a proper mode internally")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When SMB 3.1.1 POSIX Extensions are negotiated, userspace applications
using readdir() or getdents() calls without stat() on each individual file
(such as a simple "ls" or "find") would misidentify file types and exhibit
strange behavior such as not descending into directories. The reason for
this behavior is an oversight in the cifs_posix_to_fattr conversion
function. Instead of extracting the entry type for cf_dtype from the
properly converted cf_mode field, it tries to extract the type from the
PDU. While the wire representation of the entry mode is similar in
structure to POSIX stat(), the assignments of the entry types are
different. Applying the S_DT macro to cf_mode instead yields the correct
result. This is also what the equivalent function
smb311_posix_info_to_fattr in inode.c already does for stat() etc.; which
is why "ls -l" would give the correct file type but "ls" would not (as
identified by the colors).
Cc: stable@vger.kernel.org
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have a system which uses 24 SPI chip selects, raise the hard coded
limit accordingly.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250629-spi-increase-number-of-cs-v2-1-85a0a09bab32@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The common QPIC code does not do any boundary checking when it handles
the command elements and scatter gater list arrays of a BAM transaction,
thus it allows to access out of bounds elements in those.
Although it is the responsibility of the given driver to allocate enough
space for all possible BAM transaction variations, however there can be
mistakes in the driver code which can lead to hidden memory corruption
issues which are hard to debug.
This kind of problem has been observed during testing the 'spi-qpic-snand'
driver. Although the driver has been fixed with a preceding patch, but it
still makes sense to reduce the chance of having such errors again later.
In order to prevent such errors, change the qcom_alloc_bam_transaction()
function to store the number of elements of the arrays in the
'bam_transaction' strucutre during allocation. Also, add sanity checks to
the qcom_prep_bam_dma_desc_{cmd,data}() functions to avoid using out of
bounds indices for the arrays.
Tested-by: Lakshmi Sowjanya D <quic_laksd@quicinc.com> # on SDX75
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-2-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Using the mtd_nandbiterrs module for testing the driver occasionally
results in weird things like below.
1. swiotlb mapping fails with the following message:
[ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots)
[ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc
[ 87.999314] qcom_snand 79b0000.spi: failure to write raw page
[ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110)
Rebooting the board after this causes a panic due to a NULL pointer
dereference.
2. If the swiotlb mapping does not fail, rebooting the board may result
in a different panic due to a bad spinlock magic:
[ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241
[ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b
...
Investigating the issue revealed that these symptoms are results of
memory corruption which is caused by out of bounds access within the
driver.
The driver uses a dynamically allocated structure for BAM transactions,
which structure must have enough space for all possible variations of
different flash operations initiated by the driver. The required space
heavily depends on the actual number of 'codewords' which is calculated
from the pagesize of the actual NAND chip.
Although the qcom_nandc_alloc() function allocates memory for the BAM
transactions during probe, but since the actual number of 'codewords'
is not yet know the allocation is done for one 'codeword' only.
Because of this, whenever the driver does a flash operation, and the
number of the required transactions exceeds the size of the allocated
arrays the driver accesses memory out of the allocated range.
To avoid this, change the code to free the initially allocated BAM
transactions memory, and allocate a new one once the actual number of
'codewords' required for a given NAND chip is known.
Fixes: 7304d1909080 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://patch.msgid.link/20250618-qpic-snand-avoid-mem-corruption-v3-1-319c71296cda@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In probe(), two arrays of structs are allocated with the devm_kmalloc()
function, but the memory size of the allocations were given as the arrays'
length (pmic->common_irq_size for the first call and pmic->dev_irq_size for
the second devm_kmalloc call). The memory size should have been the total
memory needed.
This led to a heap overflow when the struct array was used. The issue was
first discovered with the PocketBeagle2 and BeaglePlay. The common and
device-specific structs are now allocated one at a time within the loop.
Fixes: 38c9f98db20a ("regulator: tps65219: Add support for TPS65215 Regulator IRQs")
Reported-by: Dhruva Gole <d-gole@ti.com>
Closes: https://lore.kernel.org/all/20250619153526.297398-1-d-gole@ti.com/
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://patch.msgid.link/20250620154541.2713036-1-s-ramamoorthy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can
lead to NULL pointer dereference when regulators are accessed post-unbind.
This can happen during runtime PM or other regulator operations that rely
on coupling metadata.
For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers
a panic in regulator_lock_recursive() due to stale coupling state.
Ensure n_coupled is set to 0 to prevent access to invalid pointers.
Signed-off-by: Alessandro Carminati <acarmina@redhat.com>
Link: https://patch.msgid.link/20250626083809.314842-1-acarmina@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When __regmap_init() is called from __regmap_init_i2c() and
__regmap_init_spi() (and their devm versions), the bus argument
obtained from regmap_get_i2c_bus() and regmap_get_spi_bus(), may be
allocated using kmemdup() to support quirks. In those cases, the
bus->free_on_exit field is set to true.
However, inside __regmap_init(), buf is not freed on any error path.
This could lead to a memory leak of regmap_bus when __regmap_init()
fails. Fix that by freeing bus on error path when free_on_exit is set.
Fixes: ea030ca68819 ("regmap-i2c: Set regmap max raw r/w from quirks")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Link: https://patch.msgid.link/20250626172823.18725-1-abdun.nihaal@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Matches should go from more specific to less specific, correct the
ordering of two cs42l43 entries.
Fixes: c0524067653d ("ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250626141841.77780-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of the codec drivers like wcd939x are missing in the MAINTAINERS
which is resulting in incorrect list from get_maintainers script.
Fix this by using wildcard matching on both wcd93* and wsa88* codec and
bindings.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250627160329.442795-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.
It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.
This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.
Signed-off-by: Arun Raghavan <arun@asymptotic.io>
Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com>
Fixes: 3e3f8bd56955 ("ASoC: fsl_sai: fix no frame clk in master mode")
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The helpers that are provided by SND_SOC_ACPI_INTEL_MATCH
(soc-acpi-intel-ssp-common) are used in SND_SOC_INTEL_SOF_BOARD_HELPERS
(sof_board_helpers).
SND_SOC_ACPI_INTEL_MATCH is selected by machine drivers. When
skl_hda_dsp_generic uses the board helpers, it select
SND_SOC_INTEL_SOF_BOARD_HELPERS only but not SND_SOC_ACPI_INTEL_MATCH
which initroduce the undefined symbol errors. However, it makes more
sense that SND_SOC_INTEL_SOF_BOARD_HELPERS select
SND_SOC_ACPI_INTEL_MATCH itself.
Fixes: b28b23dea314 ("ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506141543.dN0JJyZC-lkp@intel.com/
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20250626064420.450334-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When USRC=0, there is underrun issue for the non-ideal ratio mode;
according to the reference mannual, the internal measured ratio can be
used with USRC=1 and IDRC=0.
Fixes: d0250cf4f2ab ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250625020504.2728161-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
The match pattern for a optional trailing comma in the list of generics
is erroneously repeated in the code block resulting in following error:
| error: attempted to repeat an expression containing no syntax variables matched as repeating at this depth
| --> rust/kernel/init.rs:301:73
| |
| 301 | ::pin_init::try_pin_init!($(&$this in)? $t $(::<$($generics),* $(,)?>)? {
| | ^^^
Remove "$(,)?" from all code blocks in the try_init! and try_pin_init!
definitions.
Cc: stable@vger.kernel.org
Fixes: 578eb8b6db13 ("rust: pin-init: move the default error behavior of `try_[pin_]init`")
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250628-rust_init_trailing_comma-v1-1-2d162ae1a757@jannau.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix for 6.16-rc4. It resolves a build
error in the rtl8723bs driver for some versions of clang on arm64 when
checking the frame size with -Wframe-larger-than.
It has been in linux-next for a while now with no reported issues"
* tag 'staging-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: Avoid memset() in aes_cipher() and aes_decipher()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are five small serial and tty and vt fixes for 6.16-rc4. Included
in here are:
- kerneldoc fixes for recent vt changes
- imx serial driver fix
- of_node sysfs fix for a regression
- vt missing notification fix
- 8250 dt bindings fix
All of these have been in linux-next for a while with no reported issues"
* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
serial: imx: Restore original RXTL for console to fix data loss
serial: core: restore of_node information in sysfs
vt: fix kernel-doc warnings in ucs_get_fallback()
vt: add missing notification when switching back to text mode
|
|
In the current implementation of ad3530r_set_dac_powerdown() function,
the macro AD3530R_OP_MODE_CHAN_MSK(chan->channel) is used to generate
the bitmask for the operating mode of a specific channel. However, this
macro does not account for channels 4-7, which map to the second
register AD3530R_OUTPUT_OPERATING_MODE_1 for the 8 channeled device. As
a result, the bitmask is incorrectly calculated for these channels,
leading to improper configuration of the powerdown mode. Resolve this
issue by adjusting the channel index for channels 4-7 by subtracting 4
before applying the macro. This ensures that the correct bitmask is
generated for the second register.
Fixes: 93583174a3df ("iio: dac: ad3530r: Add driver for AD3530R and AD3531R")
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250626-bug_fix-v1-1-eb3c2b370f10@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Change the data type of the "adi,gain-milli" property from u32 to u16.
The devicetree binding specifies it as uint16, so we need to read it as
such to avoid an -EOVERFLOW error when parsing the property.
Fixes: c904e6dcf402 ("iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250619-iio-adc-ad7380-fix-adi-gain-milli-parsing-v1-1-4c27fb426860@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use spi_is_bpw_supported() instead of directly accessing spi->controller
->bits_per_word_mask. bits_per_word_mask may be 0, which implies that
8-bits-per-word is supported. spi_is_bpw_supported() takes this into
account while spi_ctrl_mask == SPI_BPW_MASK(8) does not.
Fixes: 0b2a740b424e ("iio: adc: ad7949: enable use with non 14/16-bit controllers")
Closes: https://lore.kernel.org/linux-spi/c8b8a963-6cef-4c9b-bfef-dab2b7bd0b0f@sirena.org.uk/
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250611-iio-adc-ad7949-use-spi_is_bpw_supported-v1-1-c4e15bfd326e@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
fxls8962af_fifo_flush() uses indio_dev->active_scan_mask (with
iio_for_each_active_channel()) without making sure the indio_dev
stays in buffer mode.
There is a race if indio_dev exits buffer mode in the middle of the
interrupt that flushes the fifo. Fix this by calling
synchronize_irq() to ensure that no interrupt is currently running when
disabling buffer mode.
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
[...]
_find_first_bit_le from fxls8962af_fifo_flush+0x17c/0x290
fxls8962af_fifo_flush from fxls8962af_interrupt+0x80/0x178
fxls8962af_interrupt from irq_thread_fn+0x1c/0x7c
irq_thread_fn from irq_thread+0x110/0x1f4
irq_thread from kthread+0xe0/0xfc
kthread from ret_from_fork+0x14/0x2c
Fixes: 79e3a5bdd9ef ("iio: accel: fxls8962af: add hw buffered sampling")
Cc: stable@vger.kernel.org
Suggested-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://patch.msgid.link/20250603-fxlsrace-v2-1-5381b36ba1db@geanix.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AXP717 ADC channel maps is missing a sentinel entry at the end. This
causes a KASAN warning.
Add the missing sentinel entry.
Fixes: 5ba0cb92584b ("iio: adc: axp20x_adc: add support for AXP717 ADC")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The mpu3050 datasheet describes that this IC only supports one INT pin,
which means one item with two cells inside binding.
Change max to match this description.
Signed-off-by: Rodrigo Gobbi <rodrigo.gobbi.7@gmail.com>
Fixes: 749787477ae4 ("dt-bindings:iio:gyro:invensense,mpu3050: txt to yaml format conversion.")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250527215818.13000-1-rodrigo.gobbi.7@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Throughout the various probe functions &indio_dev->dev is used before it
is initialized. This caused a kernel panic in st_sensors_power_enable()
when the call to devm_regulator_bulk_get_enable() fails and then calls
dev_err_probe() with the uninitialized device.
This seems to only cause a panic with dev_err_probe(), dev_err(),
dev_warn() and dev_info() don't seem to cause a panic, but are fixed
as well.
The issue is reported and traced here: [1]
Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ [1]
Cc: stable@vger.kernel.org
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://... [1]
Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Mask the value read before returning it. The value read over the
parallel bus via the AXI ADC IP block contains both the address and
the data, but callers expect val to only contain the data.
axi_adc_raw_write() takes a u32 parameter, so addr was the wrong type.
This wasn't causing any issues but is corrected anyway since we are
touching the same line to add a new variable.
Cc: stable@vger.kernel.org
Fixes: 79c47485e438 ("iio: adc: adi-axi-adc: add support for AD7606 register writing")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250530-iio-adc-adi-axi-adc-fix-ad7606_bus_reg_read-v2-1-ad2dfc0694ce@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix following dt_schema warning when offload is used:
DTC [C] arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb
/home/angelo/dev-baylibre/linux-iio/arch/arm/boot/dts/xilinx/zynq-zed-adv7511-ad7606.dtb: adc@0: 'oneOf' conditional failed, one must be fixed:
'interrupts' is a required property
'io-backends' is a required property
from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
There isn't any reason that we couldn't have interrupts wired up at the
same time we are using io-backends or SPI offload, so dropping off the
related "oneOf" block entirely.
Fixes: 81fe5529e812 ("dt-bindings: iio: adc: adi,ad7606: add SPI offload properties")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250526-wip-bl-ad7606-dtschema-fixes-v2-1-9bd56d039489@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Consider secondary address mask registers in amd64_edac in order to
get the correct total memory size of the system
* tag 'edac_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/amd64: Fix size calculation for Non-Power-of-Two DIMMs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure DR6 and DR7 are initialized to their architectural values
and not accidentally cleared, leading to misconfigurations
* tag 'x86_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Initialize DR7 by writing its architectural reset value
x86/traps: Initialize DR6 by writing its architectural reset value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Make sure an AUX perf event is really disabled when it overruns
* tag 'perf_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/aux: Fix pending disable flow when the AUX ring buffer overruns
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Make sure the new futex phash is not copied during fork in order to
avoid a double-free
* tag 'locking_urgent_for_v6.16_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Initialize futex_phash_new during fork().
|
|
If a TOP reset were to ever be erroneously requested on HW
prior to SC, the code warns and returns, but doesn't take
care to unlock the mutex in this case. Fix that.
Fixes: 909e1be65462 ("wifi: iwlwifi: implement TOP reset")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202506100707.WAnP5ePA-lkp@intel.com/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250625204210.19a0378838b1.I6bdc58d4996e995e1358ad94d4cc5017f3abf47b@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
|
|
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on my friend's Victus 15-fb2xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250627203415.56785-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add codec IDs for several NVIDIA products with HDA controllers to the
snd_hda_id_hdmi[] patch table.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/aF24rqwMKFWoHu12@ddadap-lakeline.nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Commit c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable
and post-disable") changed the call sequence to the CRTC enable/disable
and bridge pre_enable/post_disable methods, so those bridge methods are
now called when CRTC is not yet enabled.
This causes a lockup observed on Samsung Peach-Pit/Pi Chromebooks. The
source of this lockup is a call to fimd_dp_clock_enable() function, when
FIMD device is not yet runtime resumed. It worked before the mentioned
commit only because the CRTC implemented by the FIMD driver was always
enabled what guaranteed the FIMD device to be runtime resumed.
This patch adds runtime PM guards to the fimd_dp_clock_enable() function
to enable its proper operation also when the CRTC implemented by FIMD is
not yet enabled.
Fixes: 196e059a8a6a ("drm/exynos: convert clock_enable crtc callback to pipeline clock")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
If there's support for another console device (such as a TTY serial),
the kernel occasionally panics during boot. The panic message and a
relevant snippet of the call stack is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 000000000000000
Call trace:
drm_crtc_handle_vblank+0x10/0x30 (P)
decon_irq_handler+0x88/0xb4
[...]
Otherwise, the panics don't happen. This indicates that it's some sort
of race condition.
Add a check to validate if the drm device can handle vblanks before
calling drm_crtc_handle_vblank() to avoid this.
Cc: stable@vger.kernel.org
Fixes: 96976c3d9aff ("drm/exynos: Add DECON driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- imx: fix SMBus protocol compliance during block read
- omap: fix error handling path in probe
- robotfuzz, tiny-usb: prevent zero-length reads
- x86, designware, amdisp: fix build error when modules are disabled
(agreed to go in via i2c)
- scx200_acb: fix build error because of missing HAS_IOPORT
* tag 'i2c-for-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: scx200_acb: depends on HAS_IOPORT
i2c: omap: Fix an error handling path in omap_i2c_probe()
platform/x86: Use i2c adapter name to fix build errors
i2c: amd-isp: Initialize unique adapter name
i2c: designware: Initialize adapter name only when not set
i2c: tiny-usb: disable zero-length read messages
i2c: robotfuzz-osif: disable zero-length read messages
i2c: imx: fix emulated smbus block read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix possible UAF on error path in filter_free_subsystem_filters()
When freeing a subsystem filter, the filter for the subsystem is
passed in to be freed and all the events within the subsystem will
have their filter freed too. In order to free without waiting for RCU
synchronization, list items are allocated to hold what is going to be
freed to free it via a call_rcu(). If the allocation of these items
fails, it will call the synchronization directly and free after that
(causing a bit of delay for the user).
The subsystem filter is first added to this list and then the filters
for all the events under the subsystem. The bug is if one of the
allocations of the list items for the event filters fail to allocate,
it jumps to the "free_now" label which will free the subsystem
filter, then all the items on the allocated list, and then the event
filters that were not added to the list yet. But because the
subsystem filter was added first, it gets freed twice.
The solution is to add the subsystem filter after the events, and
then if any of the allocations fail it will not try to free any of
them twice
* tag 'trace-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix filter logic error
|
