| Age | Commit message (Collapse) | Author |
|---|
|
Currently, if a VF is disabled using the
'ip link set dev $ETHX vf $VF_NUM state disable' command, the VF is still
able to receive traffic.
Fix the behavior of the 'ip link set dev $ETHX vf $VF_NUM state disable'
to completely shutdown the VF's queues making it entirely disabled and
not able to receive or send any traffic.
Modify the behavior of the 'ip link set $ETHX vf $VF_NUM state enable'
command to make a VF do reinitialization bringing the queues back up.
Co-developed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Change returning codes to the kernel ones instead of
the internal ones for the entire ixgbe driver.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently ixgbe driver is notified of overheating events
via internal IXGBE_ERR_OVERTEMP error code.
Change the approach for handle_lasi() to use freshly introduced
is_overtemp function parameter which set when such event occurs.
Change check_overtemp() to bool and return true if overtemp
event occurs.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The link state of VF devices can be controlled via "ip link set", but the
current state (auto/disabled) is not reported by "ip link show".
Update ixgbe_ndo_get_vf_config() to make this info available to userspace.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
A flag was needed to denote which eventfs_inode was the "events"
directory, so a bit was taken from the "nr_entries" field, as there's not
that many entries, and 2^30 is plenty. But the bit number for nr_entries
was not updated to reflect the bit taken from it, which would add an
unnecessary integer to the structure.
Link: https://lore.kernel.org/linux-trace-kernel/20240102151832.7ca87275@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 7e8358edf503e ("eventfs: Fix file and directory uid and gid ownership")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
If a getdents() is called on the tracefs directory but does not get all
the files, it can leave a "cursor" dentry in the d_subdirs list of tracefs
dentry. This cursor dentry does not have a d_inode for it. Before
referencing tracefs_inode from the dentry, the d_inode must first be
checked if it has content. If not, then it's not a tracefs_inode and can
be ignored.
The following caused a crash:
#define getdents64(fd, dirp, count) syscall(SYS_getdents64, fd, dirp, count)
#define BUF_SIZE 256
#define TDIR "/tmp/file0"
int main(void)
{
char buf[BUF_SIZE];
int fd;
int n;
mkdir(TDIR, 0777);
mount(NULL, TDIR, "tracefs", 0, NULL);
fd = openat(AT_FDCWD, TDIR, O_RDONLY);
n = getdents64(fd, buf, BUF_SIZE);
ret = mount(NULL, TDIR, NULL, MS_NOSUID|MS_REMOUNT|MS_RELATIME|MS_LAZYTIME,
"gid=1000");
return 0;
}
That's because the 256 BUF_SIZE was not big enough to read all the
dentries of the tracefs file system and it left a "cursor" dentry in the
subdirs of the tracefs root inode. Then on remounting with "gid=1000",
it would cause an iteration of all dentries which hit:
ti = get_tracefs(dentry->d_inode);
if (ti && (ti->flags & TRACEFS_EVENT_INODE))
eventfs_update_gid(dentry, gid);
Which crashed because of the dereference of the cursor dentry which had a NULL
d_inode.
In the subdir loop of the dentry lookup of set_gid(), if a child has a
NULL d_inode, simply skip it.
Link: https://lore.kernel.org/all/20240102135637.3a21fb10@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240102151249.05da244d@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 7e8358edf503e ("eventfs: Fix file and directory uid and gid ownership")
Reported-by: "Ubisectech Sirius" <bugreport@ubisectech.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fixes: d938a8cca88a ("ice: Auxbus devices & driver for E822 TS")
Cc: Kunwu Chan <kunwu.chan@hotmail.com>
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add const modifier to function parameters and variables where appropriate
in ice_base.c and corresponding declarations in ice_base.h.
The reason for starting the change is that read-only pointers should be
marked as const when possible to allow for smoother and more optimal code
generation and optimization as well as allowing the compiler to warn the
developer about potentially unwanted modifications, while not carrying
noticeable negative impact.
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Reviewed-by: Sachin Bahadur <sachin.bahadur@intel.com>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It was found that this statistic is incorrectly
reported by HW and thus, useless.
As RX length error statistics are shown to the
end user when requested, the values reported
are misleading.
Thus, that value is no longer reported and
doesn't count anymore when adding all rx errors.
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The ice_vf_create_vsi() function and its VF ops helper introduced by commit
a4c785e8162e ("ice: convert vf_ops .vsi_rebuild to .create_vsi") are used
during an individual VF reset to re-create the VSI. This was done in order
to ensure that the VSI gets properly reconfigured within the hardware.
This is somewhat heavy handed as we completely release the VSI memory and
structure, and then create a new VSI. This can also potentially force a
change of the VSI index as we will re-use the first open slot in the VSI
array which may not be the same.
As part of implementing devlink reload, commit 6624e780a577 ("ice: split
ice_vsi_setup into smaller functions") split VSI setup into smaller
functions, introducing both ice_vsi_cfg() and ice_vsi_decfg() which can be
used to configure or deconfigure an existing software VSI structure.
Rather than completely removing the VSI and adding a new one using the
.create_vsi() VF operation, simply use ice_vsi_decfg() to remove the
current configuration. Save the VSI type and then call ice_vsi_cfg() to
reconfigure the VSI as the same type that it was before.
The existing reset logic assumes that all hardware filters will be removed,
so also call ice_fltr_remove_all() before re-configuring the VSI.
This new operation does not re-create the VSI, so rename it to
ice_vf_reconfig_vsi().
The new approach can safely share the exact same flow for both SR-IOV VFs
as well as the Scalable IOV VFs being worked on. This uses less code and is
a better abstraction over fully deleting the VSI and adding a new one.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Petr Oros <poros@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Switchdev mode allows to add mirroring rules to mirror incoming and
outgoing packets to the interface's port representor. Previously, this was
available only using software functionality. Add possibility to offload
this functionality to the NIC hardware.
Introduce ICE_MIRROR_PACKET filter action to the ice_sw_fwd_act_type enum
to identify the desired action and pass it to the hardware as well as the
VSI to mirror.
Example of tc mirror command using hardware:
tc filter add dev ens1f0np0 ingress protocol ip prio 1 flower src_mac
b4:96:91:a5:c7:a7 skip_sw action mirred egress mirror dev eth1
ens1f0np0 - PF
b4:96:91:a5:c7:a7 - source MAC address
eth1 - PR of a VF to mirror to
Co-developed-by: Marcin Szycik <marcin.szycik@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Introduce new capability - Low Latency Timestamping with Interrupt.
On supported devices, driver can request a single timestamp from FW
without polling the register afterwards. Instead, FW can issue
a dedicated interrupt when the timestamp was read from the PHY register
and its value is available to read from the register.
This eliminates the need of bottom half scheduling, which results in
minimal delay for timestamping.
For this mode, allocate TS indices sequentially, so that timestamps are
always completed in FIFO manner.
Co-developed-by: Yochai Hagvi <yochai.hagvi@intel.com>
Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Schedule service task and EXTTS in the top half to avoid bottom half
scheduling if possible, which significantly reduces timestamping delay.
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/52826a50250304ab0af14c594009f7b901c2cd31.1703596577.git.u.kleine-koenig@pengutronix.de
|
|
Decoding an invalid address with certain firmware decoders could
cause a #PF (Page Fault) in the EFI runtime context, which could
subsequently hang the system. To make {i10nm,skx}_edac more robust
against such bogus firmware decoders, filter out invalid addresses
before allowing the firmware decoder to process them.
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20231207014512.78564-1-qiuxu.zhuo@intel.com
|
|
The kernel thread function jfs_lazycommit() and jfs_sync() invoke the
try_to_freeze() in its loop. But all the kernel threads are no-freezable
by default. So if we want to make a kernel thread to be freezable, we have
to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
[Syz report]
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_imap.c:2360:2
index -878706688 is out of range for type 'struct iagctl[128]'
CPU: 1 PID: 5065 Comm: syz-executor282 Not tainted 6.7.0-rc4-syzkaller-00009-gbee0e7762ad2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:217 [inline]
__ubsan_handle_out_of_bounds+0x11c/0x150 lib/ubsan.c:348
diNewExt+0x3cf3/0x4000 fs/jfs/jfs_imap.c:2360
diAllocExt fs/jfs/jfs_imap.c:1949 [inline]
diAllocAG+0xbe8/0x1e50 fs/jfs/jfs_imap.c:1666
diAlloc+0x1d3/0x1760 fs/jfs/jfs_imap.c:1587
ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
jfs_mkdir+0x1c5/0xb90 fs/jfs/namei.c:225
vfs_mkdir+0x2f1/0x4b0 fs/namei.c:4106
do_mkdirat+0x264/0x3a0 fs/namei.c:4129
__do_sys_mkdir fs/namei.c:4149 [inline]
__se_sys_mkdir fs/namei.c:4147 [inline]
__x64_sys_mkdir+0x6e/0x80 fs/namei.c:4147
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7fcb7e6a0b57
Code: ff ff 77 07 31 c0 c3 0f 1f 40 00 48 c7 c2 b8 ff ff ff f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 b8 53 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd83023038 EFLAGS: 00000286 ORIG_RAX: 0000000000000053
RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fcb7e6a0b57
RDX: 00000000000a1020 RSI: 00000000000001ff RDI: 0000000020000140
RBP: 0000000020000140 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000286 R12: 00007ffd830230d0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[Analysis]
When the agstart is too large, it can cause agno overflow.
[Fix]
After obtaining agno, if the value is invalid, exit the subsequent process.
Reported-and-tested-by: syzbot+553d90297e6d2f50dbc7@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Modified the test from agno > MAXAG to agno >= MAXAG based on linux-next
report by kernel test robot (Dan Carpenter).
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
|
|
When KASLR is enabled, the KASLR_FLAG bit in boot_params->hdr.loadflags
should be set to 1 to propagate KASLR status from compressed kernel to
kernel, just as the choose_random_location() function does.
Currently, when the kernel is booted via the EFI stub, the KASLR_FLAG
bit in boot_params->hdr.loadflags is not set, even though it should be.
This causes some functions, such as kernel_randomize_memory(), not to
execute as expected. Fix it.
Fixes: a1b87d54f4e4 ("x86/efistub: Avoid legacy decompressor when doing EFI boot")
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ardb: drop 'else' branch clearing KASLR_FLAG]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
of_property_match_string returns an int; either an index from 0 or
greater if successful or negative on failure. Even it's very
unlikely that the DT CPU node contains multiple enable-methods
these checks should be fixed.
This patch was inspired by the work of Nick Desaulniers.
Link: https://lore.kernel.org/lkml/20230516-sunxi-v1-1-ac4b9651a8c1@google.com/T/
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-2-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+
with enabled CONFIG_UBSAN triggers the following warning:
UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29
index 2 is out of range for type 'sunxi_mc_smp_data [2]'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d
Hardware name: BCM2835
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x40/0x4c
dump_stack_lvl from ubsan_epilogue+0x8/0x34
ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80
__ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc
sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc
do_one_initcall from kernel_init_freeable+0xf4/0x2f4
kernel_init_freeable from kernel_init+0x18/0x158
kernel_init from ret_from_fork+0x14/0x28
Since the enabled method couldn't match with any entry from
sunxi_mc_smp_data, the value of the index shouldn't be used right after
the loop. So move it after the check of ret in order to have a valid
index.
Fixes: 1631090e34f5 ("ARM: sun9i: smp: Add is_a83t field")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-1-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
There is a HP ZBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED
and micmute LED work.
[ confirmed that the new entries are for new models that have no
proper name, so the strings are left as "HP" which will be updated
eventually later -- tiwai ]
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240102024916.19093-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Jamal Hadi Salim says:
====================
net/sched: Remove UAPI support for retired TC qdiscs and classifiers
Classifiers RSVP and tcindex as well as qdiscs dsmark, CBQ and ATM have already
been deleted. This patchset removes their UAPI support.
User space - with a focus on iproute2 - typically copies these UAPI headers for
different kernels.
These deletion patches are coordinated with the iproute2 maintainers to make
sure that they delete any user space code referencing removed objects at their
leisure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 051d44209842 ("net/sched: Retire CBQ qdisc") retired the CBQ qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit fb38306ceb9e ("net/sched: Retire ATM qdisc") retired the ATM qdisc.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit bbe77c14ee61 ("net/sched: Retire dsmark qdisc") retired the dsmark
classifier. Remove UAPI support for it.
Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 8c710f75256b ("net/sched: Retire tcindex classifier") retired the TC
tcindex classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 265b4da82dbf ("net/sched: Retire rsvp classifier") retired the TC RSVP
classifier.
Remove UAPI for it. Iproute2 will sync by equally removing it from user space.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Shinas Rasheed says:
====================
add octeon_ep_vf driver
This driver implements networking functionality of Marvell's Octeon
PCI Endpoint NIC VF.
This driver support following devices:
* Network controller: Cavium, Inc. Device b203
* Network controller: Cavium, Inc. Device b403
* Network controller: Cavium, Inc. Device b103
* Network controller: Cavium, Inc. Device b903
* Network controller: Cavium, Inc. Device ba03
* Network controller: Cavium, Inc. Device bc03
* Network controller: Cavium, Inc. Device bd03
Changes:
V2:
- Removed linux/version.h header file from inclusion in
octep_vf_main.c
- Corrected Makefile entry to include building octep_vf_mbox.c in
[6/8] patch.
- Removed redundant vzalloc pointer cast and vfree pointer check in
[6/8] patch.
V1: https://lore.kernel.org/all/20231221092844.2885872-1-srasheed@marvell.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
add MAINTAINERS for octeon_ep_vf driver.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the following ethtool commands:
ethtool -i|--driver devname
ethtool devname
ethtool -S|--statistics devname
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to enable MSI-x and register interrupts.
Add support to process Tx and Rx traffic. Includes processing
Tx completions and Rx refill.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for ndo ops to set MAC address, change MTU, get stats.
Add control path support to set MAC address, change MTU, get stats,
set speed, get and set link mode.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement Tx/Rx ring resource allocation and cleanup.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement VF-PF mailbox to send all control commands from VF to PF
and receive responses and notifications from PF to VF.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement hardware resource init and shutdown helper APIs, like
hardware Tx/Rx queue init/enable/disable/reset.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC VF.
Add implementation to load module, initialize, register network device,
cleanup and unload module.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to commit be809424659c ("selftests: bonding: do not set port down
before adding to bond"). The bond-arp-interval-causes-panic test failed
after commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing
it up") as the kernel will set the port down _after_ adding to bond if setting
port down specifically.
Fix it by removing the link down operation when adding to bond.
Fixes: 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In an effort to make the PS3 gelic driver easier to maintain, create two
new structures, struct gelic_hw_regs and struct gelic_chain_link, and
replace the corresponding members of struct gelic_descr with the new
structures.
The new struct gelic_hw_regs holds the register variables used by the
gelic hardware device. The new struct gelic_chain_link holds variables
used to manage the driver's linked list of gelic descr structures.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we register a cn_proc listening event, the proc_event_num_listener
variable will be incremented by one, but if PROC_CN_MCAST_IGNORE is
not called, the count will not decrease.
This will cause the proc_*_connector function to take the wrong path.
It will reappear when the forkstat tool exits via ctrl + c.
We solve this problem by determining whether
there are still listeners to clear proc_event_num_listener.
Signed-off-by: wangkeqi <wangkeqiwang@didiglobal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the @phy_timer: line to prevent the kernel-doc warning:
include/linux/phy.h:768: warning: Excess struct member 'phy_timer' description in 'phy_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michael Chan says:
====================
bnxt_en: Add basic ntuple filter support
The current driver only supports ntuple filters added by aRFS. This
patch series adds basic support for user defined TCP/UDP ntuple filters
added by the user using ethtool. Many of the patches are refactoring
patches to make the existing code more general to support both aRFS
and user defined filters. aRFS filters always have the Toeplitz hash
value from the NIC. A Toepliz hash function is added in patch 5 to
get the same hash value for user defined filters. The hash is used
to store all ntuple filters in the table and all filters must be
hashed identically using the same function and key.
v2: Fix compile error in patch #4 when CONFIG_BNXT_SRIOV is disabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add logic to delete a user specified ntuple filter from ethtool.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for adding user defined ntuple TCP/UDP filters. These
filters are similar to aRFS filters except that they don't get aged.
Source IP, destination IP, source port, or destination port can be
unspecifed as wildcard. At least one of these tuples must be specifed.
If a tuple is specified, the full mask must be specified.
All ntuple related ethtool functions are now no longer compiled only
for CONFIG_RFS_ACCEL.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
aRFS filters match all 5 tuples. User defined ntuple filters may
specify some of the tuples as wildcards. To support that, we add the
ntuple_flags to the bnxt_ntuple_filter struct to specify which tuple
fields are to be matched. The matching tuple fields will then be
passed to the firmware in bnxt_hwrm_cfa_ntuple_filter_alloc() to create
the proper filter.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Refactor the logic into a new function bnxt_del_ntp_filters(). The
same call will be used when the user deletes an ntuple filter.
The bnxt_hwrm_cfa_ntuple_filter_free() function to call fw to free
the ntuple filter is exported so that the ethtool logic can call it.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Generalize the ethtool logic that walks the ntuple hash table now that
we have the common bnxt_filter_base structure. This will allow the code
to easily extend to cover user defined ntuple or ether filters.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new function bnxt_insert_ntp_filter() to insert the ntuple filter
into the hash table and other basic setup. We'll use this function
to insert a user defined filter from ethtool.
Also, export bnxt_lookup_ntp_filter_from_idx() and bnxt_get_ntp_filter_idx()
for similar purposes. All ntuple related functions are now no longer
compiled only for CONFIG_RFS_ACCEL
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the unused flag to BNXT_FLTR_INSERTED. To prepare for multiple
pathways that an ntuple filter can be deleted, we add this flag. These
filter structures can be retreived from the RCU hash table but only
the caller that sees that the BNXT_FLTR_INSERTED flag is set can delete
the filter structure and clear the flag under spinlock.
Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the helper function to look up the ntuple filter from the
hash index and use it in bnxt_rx_flow_steer(). The helper function
will also be used by user defined ntuple filters in the next
patches.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For ntuple filters added by aRFS, the Toeplitz hash calculated by our
NIC is available and is used to store the ntuple filter for quick
retrieval. In the next patches, user defined ntuple filter support
will be added and we need to calculate the same hash for these
filters. The same hash function needs to be used so we can detect
duplicates.
Add the function bnxt_toeplitz() to calculate the Toeplitz hash for
user defined ntuple filters. bnxt_toeplitz() uses the same Toeplitz
key and the same key length as the NIC.
bnxt_get_ntp_filter_idx() is added to return the hash index. For
aRFS, the hash comes from the NIC. For user defined ntuple, we call
bnxt_toeplitz() to calculate the hash index.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
