summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-07-15Merge tag 'drm-fixes-for-v4.7-rc8-vmware' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm vmware fixes from Dave Airlie: "These are some fixes for the vmware graphics driver, that fix some black screen issues on at least Ubuntu 16.04, I think VMware would like to get these in so stable can pick them up ASAP" * tag 'drm-fixes-for-v4.7-rc8-vmware' of git://people.freedesktop.org/~airlied/linux: drm/vmwgfx: Fix error paths when mapping framebuffer drm/vmwgfx: Fix corner case screen target management drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set drm/vmwgfx: Check pin count before attempting to move a buffer drm/ttm: Make ttm_bo_mem_compat available drm/vmwgfx: Add an option to change assumed FB bpp drm/vmwgfx: Work around mode set failure in 2D VMs drm/vmwgfx: Add a check to handle host message failure
2016-07-15Merge tag 'drm-fixes-for-v4.7-rc8' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "These are just some i915 and amdgpu fixes that shows up, the amdgpu ones are polaris fixes, and the i915 one is a major regression fix" * tag 'drm-fixes-for-v4.7-rc8' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: fix power distribution issue for Polaris10 XT drm/amdgpu: Add a missing register to Polaris golden setting drm/i915: Ignore panel type from OpRegion on SKL drm/i915: Update ifdeffery for mutex->owner
2016-07-15Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Fix a CPU hotplug related corruption of the load average that got introduced in this merge window" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Correct off by one bug in load migration calculation
2016-07-15m32r: fix build warning about putcSudip Mukherjee
We were getting build warning: arch/m32r/boot/compressed/m32r_sio.c:11:13: warning: conflicting types for built-in function 'putc' Here putc is used as a static function so lets just rename it to avoid the conflict with the builtin putc. Link: http://lkml.kernel.org/r/1466977046-24724-1-git-send-email-sudipm.mukherjee@gmail.com Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm: workingset: printk missing log level, use pr_info()Anton Blanchard
Commit 612e44939c3c ("mm: workingset: eviction buckets for bigmem/lowbit machines") added a printk without a log level. Quieten it by using pr_info(). Link: http://lkml.kernel.org/r/1466982072-29836-2-git-send-email-anton@ozlabs.org Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm: thp: refix false positive BUG in page_move_anon_rmap()Hugh Dickins
The VM_BUG_ON_PAGE in page_move_anon_rmap() is more trouble than it's worth: the syzkaller fuzzer hit it again. It's still wrong for some THP cases, because linear_page_index() was never intended to apply to addresses before the start of a vma. That's easily fixed with a signed long cast inside linear_page_index(); and Dmitry has tested such a patch, to verify the false positive. But why extend linear_page_index() just for this case? when the avoidance in page_move_anon_rmap() has already grown ugly, and there's no reason for the check at all (nothing else there is using address or index). Remove address arg from page_move_anon_rmap(), remove VM_BUG_ON_PAGE, remove CONFIG_DEBUG_VM PageTransHuge adjustment. And one more thing: should the compound_head(page) be done inside or outside page_move_anon_rmap()? It's usually pushed down to the lowest level nowadays (and mm/memory.c shows no other explicit use of it), so I think it's better done in page_move_anon_rmap() than by caller. Fixes: 0798d3c022dc ("mm: thp: avoid false positive VM_BUG_ON_PAGE in page_move_anon_rmap()") Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1607120444540.12528@eggly.anvils Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@vger.kernel.org> [4.5+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm: rmap: call page_check_address() with sync enabled to avoid racy checkNaoya Horiguchi
The previous patch addresses the race between split_huge_pmd_address() and someone changing the pmd. The fix is only for splitting of normal thp (i.e. pmd-mapped thp,) and for splitting of pte-mapped thp there still is the similar race. For splitting pte-mapped thp, the pte's conversion is done by try_to_unmap_one(TTU_MIGRATION). This function checks page_check_address() to get the target pte, but it can return NULL under some race, leading to VM_BUG_ON() in freeze_page(). Fortunately, page_check_address() already has an argument to decide whether we do a quick/racy check or not, so let's flip it when called from freeze_page(). Link: http://lkml.kernel.org/r/1466990929-7452-2-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm: thp: move pmd check inside ptl for freeze_page()Naoya Horiguchi
I found a race condition triggering VM_BUG_ON() in freeze_page(), when running a testcase with 3 processes: - process 1: keep writing thp, - process 2: keep clearing soft-dirty bits from virtual address of process 1 - process 3: call migratepages for process 1, The kernel message is like this: kernel BUG at /src/linux-dev/mm/huge_memory.c:3096! invalid opcode: 0000 [#1] SMP Modules linked in: cfg80211 rfkill crc32c_intel ppdev serio_raw pcspkr virtio_balloon virtio_console parport_pc parport pvpanic acpi_cpufreq tpm_tis tpm i2c_piix4 virtio_blk virtio_net ata_generic pata_acpi floppy virtio_pci virtio_ring virtio CPU: 0 PID: 28863 Comm: migratepages Not tainted 4.6.0-v4.6-160602-0827-+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff880037320000 ti: ffff88007cdd0000 task.ti: ffff88007cdd0000 RIP: 0010:[<ffffffff811f8e06>] [<ffffffff811f8e06>] split_huge_page_to_list+0x496/0x590 RSP: 0018:ffff88007cdd3b70 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffff88007c7b88c0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000700000200 RDI: ffffea0003188000 RBP: ffff88007cdd3bb8 R08: 0000000000000001 R09: 00003ffffffff000 R10: ffff880000000000 R11: ffffc000001fffff R12: ffffea0003188000 R13: ffffea0003188000 R14: 0000000000000000 R15: 0400000000000080 FS: 00007f8ec241d740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8ec1f3ed20 CR3: 000000003707b000 CR4: 00000000000006f0 Call Trace: ? list_del+0xd/0x30 queue_pages_pte_range+0x4d1/0x590 __walk_page_range+0x204/0x4e0 walk_page_range+0x71/0xf0 queue_pages_range+0x75/0x90 ? queue_pages_hugetlb+0x190/0x190 ? new_node_page+0xc0/0xc0 ? change_prot_numa+0x40/0x40 migrate_to_node+0x71/0xd0 do_migrate_pages+0x1c3/0x210 SyS_migrate_pages+0x261/0x290 entry_SYSCALL_64_fastpath+0x1a/0xa4 Code: e8 b0 87 fb ff 0f 0b 48 c7 c6 30 32 9f 81 e8 a2 87 fb ff 0f 0b 48 c7 c6 b8 46 9f 81 e8 94 87 fb ff 0f 0b 85 c0 0f 84 3e fd ff ff <0f> 0b 85 c0 0f 85 a6 00 00 00 48 8b 75 c0 4c 89 f7 41 be f0 ff RIP split_huge_page_to_list+0x496/0x590 I'm not sure of the full scenario of the reproduction, but my debug showed that split_huge_pmd_address(freeze=true) returned without running main code of pmd splitting because pmd_present(*pmd) in precheck somehow returned 0. If this happens, the subsequent try_to_unmap() fails and returns non-zero (because page_mapcount() still > 0), and finally VM_BUG_ON() fires. This patch tries to fix it by prechecking pmd state inside ptl. Link: http://lkml.kernel.org/r/1466990929-7452-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15vmlinux.lds: account for destructor sectionsDmitry Vyukov
If CONFIG_KASAN is enabled and gcc is configured with --disable-initfini-array and/or gold linker is used, gcc emits .ctors/.dtors and .text.startup/.text.exit sections instead of .init_array/.fini_array. .dtors section is not explicitly accounted in the linker script and messes vvar/percpu layout. We want: ffffffff822bfd80 D _edata ffffffff822c0000 D __vvar_beginning_hack ffffffff822c0000 A __vvar_page ffffffff822c0080 0000000000000098 D vsyscall_gtod_data ffffffff822c1000 A __init_begin ffffffff822c1000 D init_per_cpu__irq_stack_union ffffffff822c1000 A __per_cpu_load ffffffff822d3000 D init_per_cpu__gdt_page We got: ffffffff8279a600 D _edata ffffffff8279b000 A __vvar_page ffffffff8279c000 A __init_begin ffffffff8279c000 D init_per_cpu__irq_stack_union ffffffff8279c000 A __per_cpu_load ffffffff8279e000 D __vvar_beginning_hack ffffffff8279e080 0000000000000098 D vsyscall_gtod_data ffffffff827ae000 D init_per_cpu__gdt_page This happens because __vvar_page and .vvar get different addresses in arch/x86/kernel/vmlinux.lds.S: . = ALIGN(PAGE_SIZE); __vvar_page = .; .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) { /* work around gold bug 13023 */ __vvar_beginning_hack = .; Discard .dtors/.fini_array/.text.exit, since we don't call dtors. Merge .text.startup into init text. Link: http://lkml.kernel.org/r/1467386363-120030-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15gcov: add support for gcc version >= 6Florian Meier
Link: http://lkml.kernel.org/r/20160701130914.GA23225@styxhp Signed-off-by: Florian Meier <Florian.Meier@informatik.uni-erlangen.de> Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Tested-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm, meminit: ensure node is online before checking whether pages are ↵Mel Gorman
uninitialised early_page_uninitialised looks up an arbitrary PFN. While a machine without node 0 will boot with "mm, page_alloc: Always return a valid node from early_pfn_to_nid", it works because it assumes that nodes are always in PFN order. This is not guaranteed so this patch adds robustness by always checking if the node being checked is online. Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm, meminit: always return a valid node from early_pfn_to_nidMel Gorman
early_pfn_to_nid can return node 0 if a PFN is invalid on machines that has no node 0. A machine with only node 1 was observed to crash with the following message: BUG: unable to handle kernel paging request at 000000000002a3c8 PGD 0 Modules linked in: Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011 06/30/2006 task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 RIP: reserve_bootmem_region+0x6a/0xef CR2: 000000000002a3c8 CR3: 0000000001c06000 CR4: 00000000000006b0 Call Trace: free_all_bootmem+0x4b/0x12a mem_init+0x70/0xa3 start_kernel+0x25b/0x49b The problem is that early_page_uninitialised uses the early_pfn_to_nid helper which returns node 0 for invalid PFNs. No caller of early_pfn_to_nid cares except early_page_uninitialised. This patch has early_pfn_to_nid always return a valid node. Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> [4.2+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15kasan/quarantine: fix bugs on qlist_move_cache()Joonsoo Kim
There are two bugs on qlist_move_cache(). One is that qlist's tail isn't set properly. curr->next can be NULL since it is singly linked list and NULL value on tail is invalid if there is one item on qlist. Another one is that if cache is matched, qlist_put() is called and it will set curr->next to NULL. It would cause to stop the loop prematurely. These problems come from complicated implementation so I'd like to re-implement it completely. Implementation in this patch is really simple. Iterate all qlist_nodes and put them to appropriate list. Unfortunately, I got this bug sometime ago and lose oops message. But, the bug looks trivial and no need to attach oops. Fixes: 55834c59098d ("mm: kasan: initial memory quarantine implementation") Link: http://lkml.kernel.org/r/1467766348-22419-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Alexander Potapenko <glider@google.com> Cc: Kuthonuzo Luruo <poll.stdin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15uapi: export lirc.h headerMauro Carvalho Chehab
This header contains the userspace API for lirc. This is a fixup for commit b7be755733dc ("[media] bz#75751: Move internal header file lirc.h to uapi/"). It moved the header to the right place, but it forgot to add it at Kbuild. So, despite being at uapi, it is not copied to the right place. Fixes: b7be755733dc44c72 ("[media] bz#75751: Move internal header file lirc.h to uapi/") Link: http://lkml.kernel.org/r/320c765d32bfc82c582e336d52ffe1026c73c644.1468439021.git.mchehab@s-opensource.com Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Alec Leamas <leamas.alec@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15madvise_free, thp: fix madvise_free_huge_pmd return value after splittingHuang Ying
madvise_free_huge_pmd should return 0 if the fallback PTE operations are required. In madvise_free_huge_pmd, if part pages of THP are discarded, the THP will be split and fallback PTE operations should be used if splitting succeeds. But the original code will make fallback PTE operations skipped, after splitting succeeds. Fix that via make madvise_free_huge_pmd return 0 after splitting successfully, so that the fallback PTE operations will be done. Link: http://lkml.kernel.org/r/1467135452-16688-1-git-send-email-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15Revert "scripts/gdb: add documentation example for radix tree"Kieran Bingham
This reverts commit 9b5580359a84 ("scripts/gdb: add documentation example for radix tree") The python implementation of radix tree was merged at the same time as a refactoring of the radix tree implementation and doesn't work. The feature is being reverted, thus we revert the documentation as well. Link: http://lkml.kernel.org/r/1467127337-11135-7-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15Revert "scripts/gdb: add a Radix Tree Parser"Kieran Bingham
This reverts commit e127a73d41ac ("scripts/gdb: add a Radix Tree Parser") The python implementation of radix-tree was merged at the same time as the radix-tree system was heavily reworked from commit e9256efcc8e3 ("radix-tree: introduce radix_tree_empty") to 3bcadd6fa6c4 ("radix-tree: free up the bottom bit of exceptional entries for reuse") and no longer functions, but also prevents other gdb scripts from loading. This functionality has not yet hit a release, so simply remove it for now Link: http://lkml.kernel.org/r/1467127337-11135-6-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: Perform path expansion to lx-symbol's argumentsNikolay Borisov
Python doesn't do automatic expansion of paths. In case one passes path of the from ~/foo/bar the gdb scripts won't automatically expand that and as a result the symbols files won't be loaded. Fix this by explicitly expanding all paths which begin with "~" Link: http://lkml.kernel.org/r/1467127337-11135-5-git-send-email-kieran@bingham.xyz Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: add constants.py to .gitignoreOmar Sandoval
Since scripts/gdb/linux/constants.py is autogenerated, this should have been added to .gitignore when it was introduced. Fixes: f197d75fcad1 ("scripts/gdb: provide linux constants") Link: http://lkml.kernel.org/r/1467127337-11135-4-git-send-email-kieran@bingham.xyz Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: rebuild constants.py on dependancy changeKieran Bingham
The autogenerated constants.py file was only being built on the initial call, and if the constants.py.in file changed. As we are utilising the CPP hooks, we can successfully use the call if_changed_dep rules to determine when to rebuild the file based on it's inclusions. Link: http://lkml.kernel.org/r/1467127337-11135-3-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Reported-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15scripts/gdb: silence 'nothing to do' messageKieran Bingham
The constants.py generation, involves a rule to link into the main makefile. This rule has no command and generates a spurious warning message in the build logs when CONFIG_SCRIPTS_GDB is enabled. Fix simply by giving a no-op action Link: http://lkml.kernel.org/r/1467127337-11135-2-git-send-email-kieran@bingham.xyz Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15kasan: add newline to messagesDmitry Vyukov
Currently GPF messages with KASAN look as follows: kasan: GPF could be caused by NULL-ptr deref or user memory accessgeneral protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Add newlines. Link: http://lkml.kernel.org/r/1467294357-98002-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15mm, compaction: prevent VM_BUG_ON when terminating freeing scannerDavid Rientjes
It's possible to isolate some freepages in a pageblock and then fail split_free_page() due to the low watermark check. In this case, we hit VM_BUG_ON() because the freeing scanner terminated early without a contended lock or enough freepages. This should never have been a VM_BUG_ON() since it's not a fatal condition. It should have been a VM_WARN_ON() at best, or even handled gracefully. Regardless, we need to terminate anytime the full pageblock scan was not done. The logic belongs in isolate_freepages_block(), so handle its state gracefully by terminating the pageblock loop and making a note to restart at the same pageblock next time since it was not possible to complete the scan this time. [rientjes@google.com: don't rescan pages in a pageblock] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1607111244150.83138@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606291436300.145590@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Minchan Kim <minchan@kernel.org> Tested-by: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Hugh Dickins <hughd@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-15Merge tag 'stm-for-greg-20160714' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next Alexander writes: intel_th: Fixes -t://git.kernel.org/pub/scm/linux/kernel/git/ash/stm.git tags/stm-for-greg-20160714 stable These are: * a fix for a modprobe time deadlock * a new PCI ID for Kaby Lake PCH-H
2016-07-15Merge branch 'drm-vmwgfx-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~syeh/repos_linux into drm-fixes A bunch of vmwgfx fixes that fix a black screen issue on latest distros/hw combos. * 'drm-vmwgfx-fixes' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Fix error paths when mapping framebuffer drm/vmwgfx: Fix corner case screen target management drm/vmwgfx: Delay pinning fbdev framebuffer until after mode set drm/vmwgfx: Check pin count before attempting to move a buffer drm/ttm: Make ttm_bo_mem_compat available drm/vmwgfx: Add an option to change assumed FB bpp drm/vmwgfx: Work around mode set failure in 2D VMs drm/vmwgfx: Add a check to handle host message failure
2016-07-15Merge tag 'drm-intel-fixes-2016-07-14' of ↵Dave Airlie
git://anongit.freedesktop.org/drm-intel into drm-fixes I've also realized that a pile of hang fixes for kbl landed in next, and no one thought of backporting it to 4.7 - kbl has lost prelim_hw_support tagging in 4.7-rc1 already. Mika is prepping a topic branch for those, will send you a separate pull request since it's quite a bit (but should be all well restricted to kbl code, so similar to polaris in amdgpu). * tag 'drm-intel-fixes-2016-07-14' of git://anongit.freedesktop.org/drm-intel: drm/i915: Ignore panel type from OpRegion on SKL drm/i915: Update ifdeffery for mutex->owner
2016-07-14bonding: set carrier off for devices created through netlinkBeniamino Galvani
Commit e826eafa65c6 ("bonding: Call netif_carrier_off after register_netdevice") moved netif_carrier_off() from bond_init() to bond_create(), but the latter is called only for initial default devices and ones created through sysfs: $ modprobe bonding $ echo +bond1 > /sys/class/net/bonding_masters $ ip link add bond2 type bond $ grep "MII Status" /proc/net/bonding/* /proc/net/bonding/bond0:MII Status: down /proc/net/bonding/bond1:MII Status: down /proc/net/bonding/bond2:MII Status: up Ensure that carrier is initially off also for devices created through netlink. Signed-off-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-15Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Two more polaris fixes. * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: fix power distribution issue for Polaris10 XT drm/amdgpu: Add a missing register to Polaris golden setting
2016-07-14drm/amdgpu: fix power distribution issue for Polaris10 XTKen Wang
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-14drm/amdgpu: Add a missing register to Polaris golden settingKen Wang
Signed-off-by: Ken Wang <Qingqing.Wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-07-14Input: synaptics-rmi4 - use of_get_child_by_name() to fix refcountAndrew Duggan
Calling of_find_node_by_name() assumes that the caller has incremented the refcount of the of_node being passed in. Currently, the caller is not incrementing the refcount of the of_node which results in the node being prematurely freed when of_find_node_by_name() calls of_node_put() on it. Instead use of_get_child_by_name() which does not call put on the of_node. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-14Revert "Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE"Dmitry Torokhov
This reverts commit 5f7e5445a2de848c66d2d80ba5479197e8287c33 because removal of input_mt_report_slot_state() means we no longer generate tracking IDs for the reported contacts. Cc: stable@vger.kernel.org Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Ping Cheng <pinglinux@gmail.com>
2016-07-14mtd: nand: omap2: Add check for old elm bindingTeresa Remmet
commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support") removes the check for the old elm phandle binding. Add it again to keep backward compatibility. Fixes: commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support") Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-14nvme: Remove RCU namespace protectionKeith Busch
We can't sleep with RCU read lock held, but we need to do potentially blocking stuff to namespace queues when iterating the list. This patch removes the RCU locking and holds a mutex instead. To prevent deadlocks, this patch removes holding the mutex during namespace scanning and removal. The unlocked namespace scanning is made safe by holding a reference to the namespace being scanned. List iteration that does IO has to be unlocked to allow error recovery. The caller must ensure the list can not be manipulated during such an event, so this patch adds a comment explaining this requirement to the only function that iterates an unlocked list. All callers currently meet this requirement, so no further changes required. List iterations that do not do IO can safely use the lock since it couldn't block recovery from missing forced IO completions. Reported-by: Ming Lin <mlin at kernel.org> [fixes 0bf77e9 nvme: switch to RCU freeing the namespace] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-14drm/i915: Ignore panel type from OpRegion on SKLVille Syrjälä
Dell XPS 13 9350 apparently doesn't like it when we use the panel type from OpRegion. The OpRegion panel type (0) tells us to use use low vswing for eDP, whereas the VBT panel type (2) tells us to use normal vswing. The problem is that low vswing results in some display flickers. Since no one seems to know how this stuff is supposed to be handled, let's just ignore the OpRegion panel type on SKL for now. v2: Print the panel type correctly in the debug output Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: drm-intel-fixes@lists.freedesktop.org References: https://lists.freedesktop.org/archives/intel-gfx/2016-June/098826.html Fixes: a05628195a0d ("drm/i915: Get panel_type from OpRegion panel details") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1468324837-29237-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit bb10d4ec3be4b069bfb61c60ca4f708f58f440f1) [danvet: Fix up cherry-pick conflict with an s/dev_priv/dev/.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-07-14drm/i915: Update ifdeffery for mutex->ownerChris Wilson
In commit 7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate") the owner field in the mutex was updated from being dependent upon CONFIG_SMP to using optimistic spin. Update our peek function to suite. Fixes:7608a43d8f2e ("locking/mutexes: Use MUTEX_SPIN_ON_OWNER...") Reported-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1468244777-4888-1-git-send-email-chris@chris-wilson.co.uk Reviewed-by: Matthew Auld <matthew.auld@intel.com> (cherry picked from commit 4f074a5393431a7d2cc0de7fcfe2f61d24854628) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-07-14intel_th: pci: Add Kaby Lake PCH-H supportAlexander Shishkin
This adds Intel(R) Trace Hub PCI ID for Kaby Lake PCH-H. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: <stable@vger.kernel.org>
2016-07-14intel_th: Fix a deadlock in modprobingAlexander Shishkin
Driver initialization tries to request a hub (GTH) driver module from its probe callback, resulting in a deadlock. This patch solves the problem by adding a deferred work for requesting the hub module. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: <stable@vger.kernel.org> # 4.4.x-
2016-07-14dsp56k: prevent a harmless underflowDan Carpenter
There is a mistake here where we don't allow "len" to be zero but we allow negative lengths. It's basically harmless in this case, but the underflow makes my static checker complain. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-14chardev: add missing line break in pr_warnFengguang Wu
To fix super long dmesg error lines like CHRDEV "dummy_stm.0" major number 224 goes below the dynamic allocation rangeCHRDEV "dummy_stm.1" major number 223 goes below the dynamic allocation rangeswapper: page allocation failure: order:8, mode:0x26040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK) After fix, it should look like CHRDEV "dummy_stm.0" major number 224 goes below the dynamic allocation range CHRDEV "dummy_stm.1" major number 223 goes below the dynamic allocation range swapper: page allocation failure: order:8, mode:0x26040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK) Reported-by: Philip Li <philip.li@intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-14Merge tag 'iio-for-4.8c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Third set of IIO new device support, features and cleanups for the 4.8 cycle. New core features - Selection of the clock source for IIO timestamps. This is done per device as it makes little sense to have events in one timebase and data timestamped on another. Biggest reason for this is that we currently use a clock source which is non monotonic which can result in 'interesting' data sets. (Includes export for get_monotonic_corse64 which Thomas Gleixner didn't mind in an earlier version.) - MAINTAINERS add the git tree to the list for IIO. New device support + a kind of indirect staging graduation. * Broadcom iproc-static-adc - new driver * mcp4531 - support for MCP454x, MCP456x, MCP464x and MCP466x potentiometers * mpu6050 - support the IC20608 6 axis motion tracking device * st-sensors - support the lis3l02dq + drop the lis3l02dq driver from staging. The general purpose driver is missing event support, but good to get rid of this driver which was rather long in the tooth. New driver features * ak8975 - Add vid regulator support and refactor handling in general. - Allow a delay after enabling regulators. - Runtime and system PM. * bmg160 - filter frequency control support. * bmp280 - SPI device support. - EOC interrupt support for the BMP085 - power management support. - supply regulator support. - reset gpio support - dt bindings for reset gpio and regulators. - of table to support device tree registration * max1363 - Device tree bindings. * mcp4531 - Device tree bindings. * st-pressure - temperature channels as part of triggered buffer (previously not due probably to alignment issues - see below). - lps22hb open drain interrupt support. - lps22hb temperature channel support Cleanups and reworkings. * numerous ADC drivers - ensure the iio_dev->dev.of_node is set to the parent dev.of_node so as to allow client bindings to find the device. * ak8975 - Fix incorrect handling of missing regulator - make sure power is down and remove. * bmp280 - read the calibration data only once as it doesn't change. * isl29125 - Use a few macros to make code a touch more readable. * mma8452 - fix a memory leak on error. - drop an unecessary bit of return value handling. * potentiometer kconfig - typo fix. * st-pressure - drop some uninformative default assignments of elements of the channel array structure (aids readability). * st-sensors - Harden interrupt handling considerably. These are actually all using level interrupts, but at least two known boards have them wired to edge only interrupt chips. Hence a slightly interesting bit of handling is needed in which we first allow for the easy option (level triggered) and secondly check the status registers before reenabling edge interrupts and fall back to a tight loop in the thread until we successfully clear the interrupt. No harm is done if we never succeed in doing so. It's an odd patch that has been through a lot of revisions to reach a consensus on how to handle what is basically broken hardware (which the previous defaults allowed to kind of work). - Fix alignment to defined storagebytes boundaries. - Ensure alignment of power of 2 byte boundaries. This has always in theory been part of the ABI of IIO, but we missed a few that snuck in that need fixing. The effect was minor as they were only followed by timestamp channels which were correctly aligned, - Add some docs to explain the gain calculations.
2016-07-14Merge tag 'phy-for-4.8-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-testing Kishon writes: phy: for 4.8 -rc1 *) Add a new phy_ops for setting the phy mode *) Add a new phy driver for DA8xx SoC USB PHY *) Minor fixes and cleanups Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2016-07-14Merge tag 'stm-for-greg-20160701' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-testing Alexander writes: stm class/intel_th: Updates for 4.8 These are: * runtime power management implementation for both intel_th and stm class * semi-random kerneldoc fixes
2016-07-14Merge tag 'extcon-next-for-4.8' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-testing Chanwoo writes: Update extcot://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon.git tags/extcon-next-for-4.8 n for 4.8 Detailed description for patchset: 1. Update the extcon-gpio.c driver - Use PM wakeirq APIs and support to check the state of external connector when wake-up from suspend state if the interrupt of external connector is not used as wakeup source. - Support for ACPI gpio interface 2. Remove deprecated extcon APIs using the legacy cable name - The extcon framework handle the external connector only by unique id instead of legacy cable name to prevent the problem. - Removed functions : extcon_get_cable_state() : extcon_set_cable_state() : extcon_register_interest() : extcon_unregister_interest() - It has the dependency on the axp288_charger.c driver. So, this pull request includes the 'ib-extcon-powersupply-4.8' immutable branch to protect the merge conflict. 3. Support the resource-managed function for extcon_register_notifier - Add the devm_extcon_register/unregister_notifier() funticon to handle the resource automatically by resource managed functions and split out the resource-managed function from extcon core to seprate file(devres.c). 4. Supprot the suspend/resume for extcon-adc-jack.c driver - Add the support the suspend/resume function to use extcon-adc-jack.c as wakeup source. 5. Fix the minor issue - Check the return value of find_cable_index_by_id() - Move the struct extcon_cable to extcon core from header file because it should be only handled on extcon core. - Add the missing of_node_put() after calling of_parse_phandle() to decrement the reference count.
2016-07-14Merge tag 'lkdtm-next' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-testing Kees writes: refactoring for multiple source files and better layout
2016-07-14usb: quirks: Add no-lpm quirk for ElanJoseph Salisbury
BugLink: http://bugs.launchpad.net/bugs/1498667 As reported in BugLink, this device has an issue with Linux Power Management so adding a quirk. This quirk was reccomended by Alan Stern: http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.html Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-14Merge branches 'perf-urgent-for-linus' and 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf and timer fixes from Ingo Molnar: "A fix for a posix CPU timers bug, and a perf printk message fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Fix bogus kernel printk, again * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix_cpu_timer: Exit early when process has been reaped
2016-07-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "This contains three commits to fix memory corruption bugs with certain Apple AirPort cards, plus a fix for a X86_BUG() ID definitions collision bug in asm/cpufeatures.h" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/quirks: Add early quirk to reset Apple AirPort card x86/quirks: Reintroduce scanning of secondary buses x86/quirks: Apply nvidia_bugs quirk only on root bus x86/cpu: Fix duplicated X86_BUG(9) macro
2016-07-14Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Ingo Molnar: "Fix an objtool false positive plus an UP kernel memory corruption bug on certain configs" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribble objtool: Fix STACK_FRAME_NON_STANDARD macro checking for function symbols
2016-07-13Merge branch 'sk_filter-trim-limit'David S. Miller
Willem de Bruijn says: ==================== limit sk_filter trim to payload Sockets can apply a filter to incoming packets to drop or trim them. Fix two codepaths that call skb_pull/__skb_pull after sk_filter without checking for packet length. Reading beyond skb->tail after trimming happens in more codepaths, but safety of reading in the linear segment is based on minimum allocation size (MAX_HEADER, GRO_MAX_HEAD, ..). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 15:33:55 +0000