| Age | Commit message (Collapse) | Author |
|---|
|
The riscv selftests (which were modeled after the arm64 selftests) are
improperly declaring the "emit_tests" target to depend upon the "all"
target. This approach, when combined with commit 9fc96c7c19df
("selftests: error out if kernel header files are not yet built"), has
caused build failures [1] on arm64, and is likely to cause similar
failures for riscv.
To fix this, simply remove the unnecessary "all" dependency from the
emit_tests target. The dependency is still effectively honored, because
again, invocation is via "install", which also depends upon "all".
An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.
[1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org
Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- fix a formatting error in the hwprobe documentation
- fix a spurious warning in the RISC-V PMU driver
- fix memory detection on rv32 (problem does not manifest on any known
system)
- avoid parsing legacy parsing of I in ACPI ISA strings
* tag 'riscv-for-linus-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Don't include Zicsr or Zifencei in I from ACPI
riscv: mm: fix truncation warning on RV32
perf: RISC-V: Remove PERF_HES_STOPPED flag checking in riscv_pmu_start()
Documentation: RISC-V: hwprobe: Fix a formatting error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix hibernation (after recent changes), frequency QoS and the
sparc cpufreq driver.
Specifics:
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
- Remove __init from cpufreq callbacks in the sparc driver, because
they may be called after initialization too (Viresh Kumar)"
* tag 'pm-6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: sparc: Don't mark cpufreq callbacks with __init
PM: QoS: Restore support for default value on frequency QoS
PM: hibernate: Fix writing maj:min to /sys/power/resume
|
|
Merge a PM QoS fix and a hibernation fix for 6.5-rc2.
- Unbreak the /sys/power/resume interface after recent changes (Azat
Khuzhin).
- Allow PM_QOS_DEFAULT_VALUE to be used with frequency QoS (Chungkai
Yang).
* pm-sleep:
PM: hibernate: Fix writing maj:min to /sys/power/resume
* pm-qos:
PM: QoS: Restore support for default value on frequency QoS
|
|
The current code assumes that the CSC3551(multiple cs35l41) always have
its interrupt pin connected to GPIO thus the IRQ can be acquired with
acpi_dev_gpio_irq_get. However on some newer laptop models this is no
longer the case as they have the CSC3551's interrupt pin connected to
APIC. This causes smi_i2c_probe to fail on these machines.
To support these machines, a new macro IRQ_RESOURCE_AUTO was introduced
for cs35l41 smi_node, and smi_get_irq function was modified so it tries
to get GPIO irq resource first and if failed, tries to get
APIC irq resource for cs35l41.
This patch affects only the cs35l41's probing and brings no negative
influence on machines that indeed have the cs35l41's interrupt pin
connected to GPIO.
Signed-off-by: David Xu <xuwd1@hotmail.com>
Link: https://lore.kernel.org/r/SY4P282MB18350CD8288687B87FFD2243E037A@SY4P282MB1835.AUSP282.PROD.OUTLOOK.COM
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Calling ethtool during reload can lead to call trace, because VSI isn't
configured for some time, but netdev is alive.
To fix it add rtnl lock for VSI deconfig and config. Set ::num_q_vectors
to 0 after freeing and add a check for ::tx/rx_rings in ring related
ethtool ops.
Add proper unroll of filters in ice_start_eth().
Reproduction:
$watch -n 0.1 -d 'ethtool -g enp24s0f0np0'
$devlink dev reload pci/0000:18:00.0 action driver_reinit
Call trace before fix:
[66303.926205] BUG: kernel NULL pointer dereference, address: 0000000000000000
[66303.926259] #PF: supervisor read access in kernel mode
[66303.926286] #PF: error_code(0x0000) - not-present page
[66303.926311] PGD 0 P4D 0
[66303.926332] Oops: 0000 [#1] PREEMPT SMP PTI
[66303.926358] CPU: 4 PID: 933821 Comm: ethtool Kdump: loaded Tainted: G OE 6.4.0-rc5+ #1
[66303.926400] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018
[66303.926446] RIP: 0010:ice_get_ringparam+0x22/0x50 [ice]
[66303.926649] Code: 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 48 8b 87 c0 09 00 00 c7 46 04 e0 1f 00 00 c7 46 10 e0 1f 00 00 48 8b 50 20 <48> 8b 12 0f b7 52 3a 89 56 14 48 8b 40 28 48 8b 00 0f b7 40 58 48
[66303.926722] RSP: 0018:ffffad40472f39c8 EFLAGS: 00010246
[66303.926749] RAX: ffff98a8ada05828 RBX: ffff98a8c46dd060 RCX: ffffad40472f3b48
[66303.926781] RDX: 0000000000000000 RSI: ffff98a8c46dd068 RDI: ffff98a8b23c4000
[66303.926811] RBP: ffffad40472f3b48 R08: 00000000000337b0 R09: 0000000000000000
[66303.926843] R10: 0000000000000001 R11: 0000000000000100 R12: ffff98a8b23c4000
[66303.926874] R13: ffff98a8c46dd060 R14: 000000000000000f R15: ffffad40472f3a50
[66303.926906] FS: 00007f6397966740(0000) GS:ffff98b390900000(0000) knlGS:0000000000000000
[66303.926941] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[66303.926967] CR2: 0000000000000000 CR3: 000000011ac20002 CR4: 00000000007706e0
[66303.926999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[66303.927029] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[66303.927060] PKRU: 55555554
[66303.927075] Call Trace:
[66303.927094] <TASK>
[66303.927111] ? __die+0x23/0x70
[66303.927140] ? page_fault_oops+0x171/0x4e0
[66303.927176] ? exc_page_fault+0x7f/0x180
[66303.927209] ? asm_exc_page_fault+0x26/0x30
[66303.927244] ? ice_get_ringparam+0x22/0x50 [ice]
[66303.927433] rings_prepare_data+0x62/0x80
[66303.927469] ethnl_default_doit+0xe2/0x350
[66303.927501] genl_family_rcv_msg_doit.isra.0+0xe3/0x140
[66303.927538] genl_rcv_msg+0x1b1/0x2c0
[66303.927561] ? __pfx_ethnl_default_doit+0x10/0x10
[66303.927590] ? __pfx_genl_rcv_msg+0x10/0x10
[66303.927615] netlink_rcv_skb+0x58/0x110
[66303.927644] genl_rcv+0x28/0x40
[66303.927665] netlink_unicast+0x19e/0x290
[66303.927691] netlink_sendmsg+0x254/0x4d0
[66303.927717] sock_sendmsg+0x93/0xa0
[66303.927743] __sys_sendto+0x126/0x170
[66303.927780] __x64_sys_sendto+0x24/0x30
[66303.928593] do_syscall_64+0x5d/0x90
[66303.929370] ? __count_memcg_events+0x60/0xa0
[66303.930146] ? count_memcg_events.constprop.0+0x1a/0x30
[66303.930920] ? handle_mm_fault+0x9e/0x350
[66303.931688] ? do_user_addr_fault+0x258/0x740
[66303.932452] ? exc_page_fault+0x7f/0x180
[66303.933193] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since commit 6624e780a577fc ("ice: split ice_vsi_setup into smaller
functions") ice_vsi_release does things twice. There is unregister
netdev which is unregistered in ice_deinit_eth also.
It also unregisters the devlink_port twice which is also unregistered
in ice_deinit_eth(). This double deregistration is hidden because
devl_port_unregister ignores the return value of xa_erase.
[ 68.642167] Call Trace:
[ 68.650385] ice_devlink_destroy_pf_port+0xe/0x20 [ice]
[ 68.655656] ice_vsi_release+0x445/0x690 [ice]
[ 68.660147] ice_deinit+0x99/0x280 [ice]
[ 68.664117] ice_remove+0x1b6/0x5c0 [ice]
[ 171.103841] Call Trace:
[ 171.109607] ice_devlink_destroy_pf_port+0xf/0x20 [ice]
[ 171.114841] ice_remove+0x158/0x270 [ice]
[ 171.118854] pci_device_remove+0x3b/0xc0
[ 171.122779] device_release_driver_internal+0xc7/0x170
[ 171.127912] driver_detach+0x54/0x8c
[ 171.131491] bus_remove_driver+0x77/0xd1
[ 171.135406] pci_unregister_driver+0x2d/0xb0
[ 171.139670] ice_module_exit+0xc/0x55f [ice]
Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When the number of responses with status of STATUS_IO_TIMEOUT
exceeds a specified threshold (NUM_STATUS_IO_TIMEOUT), we reconnect
the connection. But we do not return the mid, or the credits
returned for the mid, or reduce the number of in-flight requests.
This bug could result in the server->in_flight count to go bad,
and also cause a leak in the mids.
This change moves the check to a few lines below where the
response is decrypted, even of the response is read from the
transform header. This way, the code for returning the mids
can be reused.
Also, the cifs_reconnect was reconnecting just the transport
connection before. In case of multi-channel, this may not be
what we want to do after several timeouts. Changed that to
reconnect the session and the tree too.
Also renamed NUM_STATUS_IO_TIMEOUT to a more appropriate name
MAX_STATUS_IO_TIMEOUT.
Fixes: 8e670f77c4a5 ("Handle STATUS_IO_TIMEOUT gracefully")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When run under run_vmtests.sh, test scripts were failing to run with
"permission denied" due to the scripts not being executable.
It is also annoying not to be able to directly invoke run_vmtests.sh,
which is solved by giving also it the execute permission.
Link: https://lkml.kernel.org/r/20230713135440.3651409-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.
Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If get_user_pages_fast() allocates some pages but not as many as we
wanted, then the current code leaks those pages. Call put_page() on
the pages before returning.
Fixes: 129776ac2e38 ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Dafna Hirschfeld <dhirschfeld@habana.ai>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q+ZuONTsBG+1T@moroto
|
|
The encode_dma() function has integer overflow checks. The
encode_passthrough(), encode_activate() and encode_status() functions
did not. I added integer overflow checking everywhere. I also
updated the integer overflow checking in encode_dma() to use size_add()
so everything is consistent.
Fixes: 129776ac2e38 ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
[jhugo: tweak if in encode_dma() to match existing style]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q7IsPkj6WSCcL@moroto
|
|
Pull drm fixes from Dave Airlie:
"There were a bunch of fixes lined up for 2 weeks, so we have quite a
few scattered fixes, mostly amdgpu and i915, but ttm has a bunch and
nouveau makes an appearance.
So a bit busier than usual for rc2, but nothing seems out of the
ordinary.
fbdev:
- dma: Fix documented default preferred_bpp value
ttm:
- fix warning that we shouldn't mix && and ||
- never consider pinned BOs for eviction&swap
- Don't leak a resource on eviction error
- Don't leak a resource on swapout move error
- fix bulk_move corruption when adding a entry
client:
- Send hotplug event after registering a client
dma-buf:
- keep the signaling time of merged fences v3
- fix an error pointer vs NULL bug
sched:
- wait for all deps in kill jobs
- call set fence parent from scheduled
i915:
- Don't preserve dpll_hw_state for slave crtc in Bigjoiner
- Consider OA buffer boundary when zeroing out reports
- Remove dead code from gen8_pte_encode
- Fix one wrong caching mode enum usage
amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms
don't support it)
nouveau:
- disp: fix HDMI on gt215+
- disp/g94: enable HDMI
- acr: Abort loading ACR if no firmware was found
- bring back blit subchannel for pre nv50 GPUs
- Fix drm_dp_remove_payload() invocation
ivpu:
- Fix VPU register access in irq disable
- Clear specific interrupt status bits on C0
bridge:
- dw_hdmi: fix connector access for scdc
- ti-sn65dsi86: Fix auxiliary bus lifetime
panel:
- simple: Add connector_type for innolux_at043tn24
- simple: Add Powertip PH800480T013 drm_display_mode flags"
* tag 'drm-fixes-2023-07-14-1' of git://anongit.freedesktop.org/drm/drm: (32 commits)
drm/nouveau: bring back blit subchannel for pre nv50 GPUs
drm/nouveau/acr: Abort loading ACR if no firmware was found
drm/amd: Align SMU11 SMU_MSG_OverridePcieParameters implementation with SMU13
drm/amd: Move helper for dynamic speed switch check out of smu13
drm/amd/pm: conditionally disable pcie lane/speed switching for SMU13
drm/amd/pm: share the code around SMU13 pcie parameters update
drm/amdgpu: avoid restore process run into dead loop.
drm/amd/pm: fix smu i2c data read risk
drm/nouveau/disp/g94: enable HDMI
drm/nouveau/disp: fix HDMI on gt215+
drm/client: Send hotplug event after registering a client
drm/i915: Fix one wrong caching mode enum usage
drm/i915: Remove dead code from gen8_pte_encode
drm/i915/perf: Consider OA buffer boundary when zeroing out reports
drm/i915: Don't preserve dpll_hw_state for slave crtc in Bigjoiner
drm/ttm: never consider pinned BOs for eviction&swap
drm/fbdev-dma: Fix documented default preferred_bpp value
dma-buf: fix an error pointer vs NULL bug
accel/ivpu: Clear specific interrupt status bits on C0
accel/ivpu: Fix VPU register access in irq disable
...
|
|
Pull ceph fix from Ilya Dryomov:
"A fix to prevent a potential buffer overrun in the messenger, marked
for stable"
* tag 'ceph-for-6.5-rc2' of https://github.com/ceph/ceph-client:
libceph: harden msgr2.1 frame segment length checks
|
|
Copy the bounds checking from encode_message() to decode_message().
This patch addresses the following concerns. Ensure that there is
enough space for at least one header so that we don't have a negative
size later.
if (msg_hdr_len < sizeof(*trans_hdr))
Ensure that we have enough space to read the next header from the
msg->data.
if (msg_len > msg_hdr_len - sizeof(*trans_hdr))
return -EINVAL;
Check that the trans_hdr->len is not below the minimum size:
if (hdr_len < sizeof(*trans_hdr))
This minimum check ensures that we don't corrupt memory in
decode_passthrough() when we do.
memcpy(out_trans->data, in_trans->data, len - sizeof(in_trans->hdr));
And finally, use size_add() to prevent an integer overflow:
if (size_add(msg_len, hdr_len) > msg_hdr_len)
Fixes: 129776ac2e38 ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK0Q5nbLyDO7kJa+@moroto
|
|
There are several issues in this code. The check at the start of the
loop:
if (user_len >= user_msg->len) {
This check does not ensure that we have enough space for the trans_hdr
(8 bytes). Instead the check needs to be:
if (user_len > user_msg->len - sizeof(*trans_hdr)) {
That subtraction is done as an unsigned long we want to avoid
negatives. Add a lower bound to the start of the function.
if (user_msg->len < sizeof(*trans_hdr))
There is a second integer underflow which can happen if
trans_hdr->len is zero inside the encode_passthrough() function.
memcpy(out_trans->data, in_trans->data, in_trans->hdr.len - sizeof(in_trans->hdr));
Instead of adding a check to encode_passthrough() it's better to check
in this central place. Add that check:
if (trans_hdr->len < sizeof(trans_hdr)
The final concern is that the "user_len + trans_hdr->len" might have an
integer overflow bug. Use size_add() to prevent that.
- if (user_len + trans_hdr->len > user_msg->len) {
+ if (size_add(user_len, trans_hdr->len) > user_msg->len) {
Fixes: 129776ac2e38 ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9a0cb0c1-a974-4f10-bc8d-94437983639a@moroto.mountain
|
|
request_mem_region_muxed()
Muxed (mem) regions will wait in request_mem_region_muxed() if the region
is busy (in use by another consumer) during the call.
In order to wake-up possibly waiting other consumers of the region,
it must be released by a release_mem_region() call, which will actually
wake up any waiters.
release_mem_region() also frees the resource created by
request_mem_region_muxed(), avoiding the need for the unmatched kfree().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230711095920.264308-1-hdegoede@redhat.com
|
|
We used to insert the data commands following a pre-flush to the head
of the queue until commit 1e82fadfc6b ("blk-mq: do not do head insertions
post-pre-flush commands"). Not doing this seems to cause hangs of
such commands on NFS workloads when exported from file systems with
SATA SSDs. I have no idea why this would starve these workloads,
but doing a semantic revert of this patch (which looks quite different
due to various other changes) fixes the hangs.
Fixes: 1e82fadfc6b ("blk-mq: do not do head insertions post-pre-flush commands")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230714143014.11879-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the axes and add home button support as suggested by Hans de Goede.
Signed-off-by: Thomas GENTY <tomlohave@gmail.com>
Link: https://lore.kernel.org/r/20230714105117.192938-1-tomlohave@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Remove the class-D internal register setting during initialization
to be compatible with most speaker designs to avoid noise.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20230712062553.31066-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To get the changes in:
e910baa9c1efdf76 ("KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch don't affect things that are used in
arm-spe.c (things like MIDR_NEOVERSE_N1, etc). Unsure if Apple M2 has
SPE (Statistical Profiling Extension) :-)
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Picking the changes from:
01dfa8e969dbbc72 ("ALSA: ump: Add info flag bit for static blocks")
e375b8a045873cf5 ("ALSA: ump: Add more attributes to UMP EP and FB info")
30fc139260d46e9b ("ALSA: ump: Add ioctls to inquiry UMP EP and Block info via control API")
127ae6f6dad2edb2 ("ALSA: rawmidi: Skip UMP devices at SNDRV_CTL_IOCTL_RAWMIDI_NEXT_DEVICE")
e3a8a5b726bdd903 ("ALSA: rawmidi: UMP support")
a4bb75c4f19db711 ("ALSA: uapi: pcm: control the filling of the silence samples for drain")
That harvests some new ioctls:
$ tools/perf/trace/beauty/sndrv_ctl_ioctl.sh > before.ctl
$ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh > before.pcm
$ cp include/uapi/sound/asound.h tools/include/uapi/sound/asound.h
$ tools/perf/trace/beauty/sndrv_ctl_ioctl.sh > after.ctl
$ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh > after.pcm
$ diff -u before.ctl after.ctl
--- before.ctl 2023-07-14 10:17:00.319591889 -0300
+++ after.ctl 2023-07-14 10:17:24.668248373 -0300
@@ -22,6 +22,9 @@
[0x40] = "RAWMIDI_NEXT_DEVICE",
[0x41] = "RAWMIDI_INFO",
[0x42] = "RAWMIDI_PREFER_SUBDEVICE",
+ [0x43] = "UMP_NEXT_DEVICE",
+ [0x44] = "UMP_ENDPOINT_INFO",
+ [0x45] = "UMP_BLOCK_INFO",
[0xd0] = "POWER",
[0xd1] = "POWER_STATE",
};
$ diff -u before.pcm after.pcm
$
Now those will be decoded when they appear, see a system wide 'perf
trace' session example here:
# perf trace -e ioctl --max-events=10
0.000 ( 0.010 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffc0041d54c) = 0
2.444 ( 0.005 ms): wireplumber/2304 ioctl(fd: 47, cmd: TIOCOUTQ, arg: 0x7f16e9afea24) = 0
2.452 ( 0.002 ms): wireplumber/2304 ioctl(fd: 47, cmd: TIOCOUTQ, arg: 0x7f16e9afea24) = 0
11.348 ( 0.010 ms): gnome-shell/2240 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffc0041ccf0) = 0
11.406 ( 0.037 ms): gnome-shel:cs0/2259 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f3cf69fdc60) = 0
11.476 ( 0.009 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffc0041ce50) = 0
11.497 ( 0.019 ms): gnome-shell/2240 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffc0041cdf0) = 0
12.481 ( 0.020 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365fea60) = 0
12.529 ( 0.009 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365feab0) = 0
12.624 ( 0.018 ms): firefox:cs0/3651 ioctl(fd: 40, cmd: DRM_I915_IRQ_EMIT, arg: 0x7f1c365fea30) = 0
#
Silencing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/lkml/ZLFOrTE2+xZBgHGe@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To get the changes in:
228a27cf78afc63a ("vhost: Allow worker switching while work is queueing")
c1ecd8e950079774 ("vhost: allow userspace to create workers")
To pick up these changes and support them:
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
$ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
$ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
$ diff -u before after
--- before 2023-07-14 09:58:14.268249807 -0300
+++ after 2023-07-14 09:58:23.041493892 -0300
@@ -10,6 +10,7 @@
[0x12] = "SET_VRING_BASE",
[0x13] = "SET_VRING_ENDIAN",
[0x14] = "GET_VRING_ENDIAN",
+ [0x15] = "ATTACH_VRING_WORKER",
[0x20] = "SET_VRING_KICK",
[0x21] = "SET_VRING_CALL",
[0x22] = "SET_VRING_ERR",
@@ -31,10 +32,12 @@
[0x7C] = "VDPA_SET_GROUP_ASID",
[0x7D] = "VDPA_SUSPEND",
[0x7E] = "VDPA_RESUME",
+ [0x9] = "FREE_WORKER",
};
static const char *vhost_virtio_ioctl_read_cmds[] = {
[0x00] = "GET_FEATURES",
[0x12] = "GET_VRING_BASE",
+ [0x16] = "GET_VRING_WORKER",
[0x26] = "GET_BACKEND_FEATURES",
[0x70] = "VDPA_GET_DEVICE_ID",
[0x71] = "VDPA_GET_STATUS",
@@ -44,6 +47,7 @@
[0x79] = "VDPA_GET_CONFIG_SIZE",
[0x7A] = "VDPA_GET_AS_NUM",
[0x7B] = "VDPA_GET_VRING_GROUP",
+ [0x8] = "NEW_WORKER",
[0x80] = "VDPA_GET_VQS_COUNT",
[0x81] = "VDPA_GET_GROUP_NUM",
};
$
For instance, see how those 'cmd' ioctl arguments get translated, now
ATTACH_VRING_WORKER, GET_VRING_WORKER and NEW_WORKER, will be as well:
# perf trace -a -e ioctl --max-events=10
0.000 ( 0.011 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
21.353 ( 0.014 ms): pipewire/2261 ioctl(fd: 60, cmd: SNDRV_PCM_HWSYNC, arg: 0x1) = 0
25.766 ( 0.014 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
25.845 ( 0.034 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
25.916 ( 0.011 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
25.941 ( 0.025 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ATOMIC, arg: 0x7ffe4a22c840) = 0
32.915 ( 0.009 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_RMFB, arg: 0x7ffe4a22cf9c) = 0
42.522 ( 0.013 ms): gnome-shell/2196 ioctl(fd: 14, cmd: DRM_I915_IRQ_WAIT, arg: 0x7ffe4a22c740) = 0
42.579 ( 0.031 ms): gnome-shel:cs0/2212 ioctl(fd: 14, cmd: DRM_I915_IRQ_EMIT, arg: 0x7fd43915dc70) = 0
42.644 ( 0.010 ms): gnome-shell/2196 ioctl(fd: 9, cmd: DRM_MODE_ADDFB2, arg: 0x7ffe4a22c8a0) = 0
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZLFJ%2FRsDGYiaH5nj@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick the changes in:
b848b26c6672c9b9 ("net: Kill MSG_SENDPAGE_NOTLAST")
5e2ff6704a275be0 ("scm: add SO_PASSPIDFD and SCM_PIDFD")
4fe38acdac8a71f7 ("net: Block MSG_SENDPAGE_* from being passed to sendmsg() by userspace")
b841b901c452d926 ("net: Declare MSG_SPLICE_PAGES internal sendmsg() flag")
That don't result in any changes in the tables generated from that
header.
But while updating I noticed we were not handling MSG_BATCH and MSG_ZEROCOPY in the
hard coded table for the msg flags table, add them.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Mikhalitsyn <alexander@mihalicyn.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZLFGuHDwUGDGXdoR@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The ida_alloc_range() function returns negative error codes on error.
On success it returns values in the min to max range (inclusive). It
never returns more then INT_MAX even if "max" is higher. It never
returns values in the 0 to (min - 1) range.
The bug is that "min" is an unsigned int so negative error codes will
be promoted to high positive values errors treated as success.
Fixes: 1a14bf0fc7ed ("iommu/sva: Use GFP_KERNEL for pasid allocation")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/6b32095d-7491-4ebb-a850-12e96209eaaf@kili.mountain
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The err_restore_domain flow was accidently inserted into the success path
in commit 1000dccd5d13 ("iommu: Allow IOMMU_RESV_DIRECT to work on
ARM"). It should only happen if iommu_create_device_direct_mappings()
fails. This caused the domains the be wrongly changed and freed whenever
the sysfs is used, resulting in an oops:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 3417 Comm: avocado Not tainted 6.4.0-rc4-next-20230602 #3
Hardware name: Dell Inc. PowerEdge R6515/07PXPY, BIOS 2.3.6 07/06/2021
RIP: 0010:__iommu_attach_device+0xc/0xa0
Code: c0 c3 cc cc cc cc 48 89 f0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 48 8b 47 08 <48> 8b 00 48 85 c0 74 74 48 89 f5 e8 64 12 49 00 41 89 c4 85 c0 74
RSP: 0018:ffffabae0220bd48 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9ac04f70e410 RCX: 0000000000000001
RDX: ffff9ac044db20c0 RSI: ffff9ac044fa50d0 RDI: ffff9ac04f70e410
RBP: ffff9ac044fa50d0 R08: 1000000100209001 R09: 00000000000002dc
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9ac043d54700
R13: ffff9ac043d54700 R14: 0000000000000001 R15: 0000000000000001
FS: 00007f02e30ae000(0000) GS:ffff9afeb2440000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000012afca006 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? __iommu_queue_command_sync+0x80/0xc0
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? __iommu_attach_device+0xc/0xa0
? __iommu_attach_device+0x1c/0xa0
__iommu_device_set_domain+0x42/0x80
__iommu_group_set_domain_internal+0x5d/0x160
iommu_setup_default_domain+0x318/0x400
iommu_group_store_type+0xb1/0x200
kernfs_fop_write_iter+0x12f/0x1c0
vfs_write+0x2a2/0x3b0
ksys_write+0x63/0xe0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0033:0x7f02e2f14a6f
Reorganize the error flow so that the success branch and error branches
are clearer.
Fixes: 1000dccd5d13 ("iommu: Allow IOMMU_RESV_DIRECT to work on ARM")
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/0-v1-5bd8cc969d9e+1f1-iommu_set_def_fix_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4
packets.") checks DODGY bit for UDP, but for packets that can be fed
directly to the device after gso_segs reset, it actually falls through
to fragmentation:
https://lore.kernel.org/all/CAJPywTKDdjtwkLVUW6LRA2FU912qcDmQOQGt2WaDo28KzYDg+A@mail.gmail.com/
This change restores the expected behavior of GSO_UDP_L4 packets.
Fixes: 1fd54773c267 ("udp: allow header check for dodgy GSO_UDP_L4 packets.")
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Identify issues that arise by using the tests/doublebitand.cocci
semantic patch. Need to remove duplicate expression in if statement.
Signed-off-by: Wang Ming <machel@vivo.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is expected that most callers should _ignore_ the errors return by
debugfs_create_dir() in bnad_debugfs_init().
Signed-off-by: Wang Ming <machel@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fails
Fix to record 0-length data to data_loc in fetch_store_string*() if it fails
to get the string data.
Currently those expect that the data_loc is updated by store_trace_args() if
it returns the error code. However, that does not work correctly if the
argument is an array of strings. In that case, store_trace_args() only clears
the first entry of the array (which may have no error) and leaves other
entries. So it should be cleared by fetch_store_string*() itself.
Also, 'dyndata' and 'maxlen' in store_trace_args() should be updated
only if it is used (ret > 0 and argument is a dynamic data.)
Link: https://lore.kernel.org/all/168908496683.123124.4761206188794205601.stgit@devnote2/
Fixes: 40b53b771806 ("tracing: probeevent: Add array type support")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Move the call to of_get_ethdev_address to mtk_add_mac which is part of
the probe function and can hence itself return -EPROBE_DEFER should
of_get_ethdev_address return -EPROBE_DEFER. This allows us to entirely
get rid of the mtk_init function.
The problem of of_get_ethdev_address returning -EPROBE_DEFER surfaced
in situations in which the NVMEM provider holding the MAC address has
not yet be loaded at the time mtk_eth_soc is initially probed. In this
case probing of mtk_eth_soc should be deferred instead of falling back
to use a random MAC address, so once the NVMEM provider becomes
available probing can be repeated.
Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we create an L2 loop on a bridge in netns, we will see packets storm
even if STP is enabled.
# unshare -n
# ip link add br0 type bridge
# ip link add veth0 type veth peer name veth1
# ip link set veth0 master br0 up
# ip link set veth1 master br0 up
# ip link set br0 type bridge stp_state 1
# ip link set br0 up
# sleep 30
# ip -s link show br0
2: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b6:61:98:1c:1c:b5 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped missed mcast
956553768 12861249 0 0 0 12861249 <-. Keep
TX: bytes packets errors dropped carrier collsns | increasing
1027834 11951 0 0 0 0 <-' rapidly
This is because llc_rcv() drops all packets in non-root netns and BPDU
is dropped.
Let's add extack warning when enabling STP in netns.
# unshare -n
# ip link add br0 type bridge
# ip link set br0 type bridge stp_state 1
Warning: bridge: STP does not work in non-root netns.
Note this commit will be reverted later when we namespacify the whole LLC
infra.
Fixes: e730c15519d0 ("[NET]: Make packet reception network namespace safe")
Suggested-by: Harry Coin <hcoin@quietfountain.com>
Link: https://lore.kernel.org/netdev/0f531295-e289-022d-5add-5ceffa0df9bc@quietfountain.com/
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CPSW ALE has 75 bit ALE entries which are stored within three 32 bit words.
The cpsw_ale_get_field() and cpsw_ale_set_field() functions assume that the
field will be strictly contained within one word. However, this is not
guaranteed to be the case and it is possible for ALE field entries to span
across up to two words at the most.
Fix the methods to handle getting/setting fields spanning up to two words.
Fixes: db82173f23c5 ("netdev: driver: ethernet: add cpsw address lookup engine support")
Signed-off-by: Tanmay Patil <t-patil@ti.com>
[s-vadapalli@ti.com: rephrased commit message and added Fixes tag]
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The at9331 is only able to read or write a single register at once. The
driver has a custom regmap bus and chooses to tell the regmap core about
this by reporting the maximum transfer sizes rather than the explicit
flags that exist at the regmap level. Since there are a number of
problems with the raw transfer limits and the regmap level flags are
better integrated anyway convert the driver to use the flags.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The register abstraction has wrappers around both the normal writel()
and its writel_relaxed() counterpart, but this has led to a lot of users
ending up with the relaxed version.
There is sometimes a need to intentionally pick the relaxed accessor for
performance critical functions, but I noticed that each hantro_reg_write()
call also contains a non-relaxed readl(), which is typically much more
expensive than a writel, so there is little benefit here but an added
risk of missing a serialization against DMA.
To make this behave like other interfaces, use the normal accessor by
default and only provide the relaxed version as an alternative for
performance critical code. hantro_postproc.c is the only place that
used both the relaxed and normal writel, but this does not seem
cricital either, so change it all to the normal ones.
[hverkuil: fix function prototype alignment]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In some configurations, gcc decides not to inline the register accessor
functions, which in turn leads to lots of temporary hantro_reg structures
on the stack that cannot be eliminated because they escape into an
uninlined function:
drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c:1022:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Mark all of these as __always_inline so the compiler is able to completely
eliminate the temporary structures instead, which brings the stack usage
back down to just the normal local variables.
Closes: https://lore.kernel.org/oe-kbuild-all/202306151506.goHEegOd-lkp@intel.com/
[hverkuil: fix function prototype alignment, wrap commit log]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 727a400686a2 ("media: verisilicon: Add Rockchip AV1 decoder")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Will cause below warning then reboot when exercising the decoder with
fluster on mt8192-asurada-spherion.
This deinit function is called on the v4l2 release callback, even though
the work might not have been initialized as that only happens if/when the
codec specific 'decode' callback is called (as a result of device_run m2m
callback).
CPU: 5 PID: 2338 Comm: gst-launch-1.0 Tainted: G W 6.4.0-rc5-next-20230607+ #475
Hardware name: Google Spherion (rev0 - 3) (DT)
pstate: 00400009 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __flush_work.isra.0+0x23c/0x258
lr : __cancel_work_timer+0x14c/0x1c8
sp : ffff8000896e3b00
x29: ffff8000896e3b00 x28: ffff57c3d4079f80 x27: 0000000000000000
x26: ffff57c3d4079f80 x25: ffffb76395b59dc8 x24: 0000000000000001
x23: ffffb763928daab8 x22: ffff57c3d4079f80 x21: 0000000000000000
x20: ffffb763955f6778 x19: ffff57c3cf06f4a0 x18: 0000000000000000
x17: 000000040044ffff x16: 005000f2b5503510 x15: 0000000000000000
x14: ffff57c3c03a1f80 x13: ffffa0616a2fc000 x12: 000000003464d91d
x11: 0000000000000000 x10: 0000000000001b10 x9 : ffffb763928de61c
x8 : ffff57c3d407baf0 x7 : 0000000000000000 x6 : ffff57c3d4079f80
x5 : ffff57c3d4079f80 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff8000896e3bf0 x1 : 0000000000000011 x0 : 0000000000000000
Call trace:
__flush_work.isra.0+0x23c/0x258
__cancel_work_timer+0x14c/0x1c8
cancel_work_sync+0x1c/0x30
vdec_msg_queue_deinit+0xac/0xc8
vdec_h264_slice_deinit+0x64/0xb8
vdec_if_deinit+0x3c/0x68
mtk_vcodec_dec_release+0x20/0x40
fops_vcodec_release+0x50/0xd8
v4l2_release+0x7c/0x100
__fput+0x80/0x270
____fput+0x18/0x30
task_work_run+0x78/0xe0
do_notify_resume+0x29c/0x7f8
el0_svc+0xa4/0xb8
el0t_64_sync_handler+0xc0/0xc8
el0t_64_sync+0x1a8/0x1b0
---[ end trace 0000000000000000 ]---
Fixes: 297160d411e3 ("media: mediatek: vcodec: move core context from device to each instance")
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
After having been assigned to NULL value at cx23885-dvb.c:1202,
pointer '0' is dereferenced at cx23885-dvb.c:2469.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Nikolay Burykin <burikin@ivk.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Handle (and warn about) possible error waiting for MSGCODE_PING result.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The mtk8195_jpegenc_drvdata object was added outside of an #ifdef causing
a harmless build warning.
drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c:1879:32: error: 'mtk8195_jpegenc_drvdata' defined but not used [-Werror=unused-variable]
1879 | static struct mtk_jpeg_variant mtk8195_jpegenc_drvdata = {
| ^~~~~~~~~~~~~~~~~~~~~~~
A follow-up patch moved it inside of an #ifdef, which caused more
warnings, and a third patch ended up adding even more #ifdefs. These
were all bogus, since the actual problem here is the incorrect use
of of_ptr(). Since the driver (like any other modern platform driver)
only works in combination with CONFIG_OF, there is no point in hiding
the reference, so just remove that along with all the pointless #ifdef
checks in the driver.
This improves build coverage and avoids running into the same problem
again when another part of the driver gets changed that relies on
the #ifdef blocks to be completely matched.
Fixes: 934e8bccac95 ("mtk-jpegenc: support jpegenc multi-hardware")
Fixes: 4ae47770d57b ("media: mtk-jpegenc: Fix a compilation issue")
Fixes: da4ede4b7fd6 ("media: mtk-jpeg: move data/code inside CONFIG_OF blocks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
imx jpeg encoder and decoder support 4 slots each,
aim to support some virtualization scenarios.
driver should only enable one slot one time.
but due to some hardware issue,
only slot 0 can be enabled in imx8q platform,
and they may be fixed in imx9 platform.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The path did not match the one it was submitted into linux-firmware
which prevented generic distribution from having working CODEC.
Fixes: 9f599f351e86 ("media: amphion: add vpu core driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This simplifies the code and silences -517 error messages. Also
the reason is listed in /sys/kernel/debug/devices_deferred.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: ming_qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Select V4L2_FWNODE as the driver depends on it.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: aa31f6514047 ("media: atomisp: allow building the driver again")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Address these compiler warnings by initialising the m_best and p_best
values to 0 and 1 respectively (as latter is used as a divisor):
drivers/media/i2c/tc358746.c: In function 'tc358746_find_pll_settings':
>> drivers/media/i2c/tc358746.c:817:13: warning: 'p_best' is used uninitialized
[-Wuninitialized]
817 | u16 p_best, p;
| ^~~~~~
>> drivers/media/i2c/tc358746.c:816:13: warning: 'm_best' is used uninitialized
[-Wuninitialized]
816 | u16 m_best, mul;
| ^~~~~~
The warnings may well be a false positive but it is difficult for a
compiler to find out whether that truly is the case.
Closes: https://lore.kernel.org/oe-kbuild-all/202305301627.fLT3Bkds-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 80a21da3605 ("media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This was the ALC283 depop procedure.
Maybe this procedure wasn't suitable with new codec.
So, let us remove it. But HP 15z-fc000 must do 3k pull low. If it
reboot with plugged headset,
it will have errors show don't find codec error messages. Run 3k pull
low will solve issues.
So, let AMD chipset will run this for workarround.
Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Reported-by: Joseph C. Sible <josephcsible@gmail.com>
Closes: https://lore.kernel.org/r/CABpewhE4REgn9RJZduuEU6Z_ijXNeQWnrxO1tg70Gkw=F8qNYg@mail.gmail.com/
Link: https://lore.kernel.org/r/4678992299664babac4403d9978e7ba7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The syzbot fuzzer identified a problem in the usbnet driver:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18 e8 2c b4 5b fb 48 8b 7c 24 18 e8 42 07 f0 fe 41 89 d8 44 89 e1 4c 89 ea 48 89 c6 48 c7 c7 a0 c9 fc 8a e8 5a 6f 23 fb <0f> 0b e9 58 f8 ff ff e8 fe b3 5b fb 48 81 c5 c0 05 00 00 e9 84 f7
RSP: 0018:ffffc9000463f568 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
RDX: ffff88801eb28000 RSI: ffffffff814c03b7 RDI: 0000000000000001
RBP: ffff8881443b7190 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000003
R13: ffff88802a77cb18 R14: 0000000000000003 R15: ffff888018262500
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556a99c15a18 CR3: 0000000028c71000 CR4: 0000000000350ef0
Call Trace:
<TASK>
usbnet_start_xmit+0xfe5/0x2190 drivers/net/usb/usbnet.c:1453
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3578 [inline]
dev_hard_start_xmit+0x187/0x700 net/core/dev.c:3594
...
This bug is caused by the fact that usbnet trusts the bulk endpoint
addresses its probe routine receives in the driver_info structure, and
it does not check to see that these endpoints actually exist and have
the expected type and directions.
The fix is simply to add such a check.
Reported-and-tested-by: syzbot+63ee658b9a100ffadbe2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000a56e9105d0cec021@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/ea152b6d-44df-4f8a-95c6-4db51143dcc1@rowland.harvard.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I get sporadic timeouts from the driver when using the
MV88E6352. Reading the status again after the loop fixes the
problem: the operation is successful but goes undetected.
Some added prints show things like this:
[ 58.356209] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1b reg 0b, mask 8000, val 0000, data c000
[ 58.367487] mv88e6085 mdio_mux-0.1:00: Timeout waiting for
ATU op 4000, fid 0001
(...)
[ 61.826293] mv88e6085 mdio_mux-0.1:00: Timeout while waiting
for switch, addr 1c reg 18, mask 8000, val 0000, data 9860
[ 61.837560] mv88e6085 mdio_mux-0.1:00: Timeout waiting
for PHY command 1860 to complete
The reason is probably not the commands: I think those are
mostly fine with the 50+50ms timeout, but the problem
appears when OpenWrt brings up several interfaces in
parallel on a system with 7 populated ports: if one of
them take more than 50 ms and waits one or more of the
others can get stuck on the mutex for the switch and then
this can easily multiply.
As we sleep and wait, the function loop needs a final
check after exiting the loop if we were successful.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Fixes: 35da1dfd9484 ("net: dsa: mv88e6xxx: Improve performance of busy bit polling")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230712223405.861899-1-linus.walleij@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.5-2023-07-12:
amdgpu:
- SMU i2c locking fix
- Fix a possible deadlock in process restoration for ROCm apps
- Disable PCIe lane/speed switching on Intel platforms (the platforms don't support it)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712184009.7740-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Don't preserve dpll_hw_state for slave crtc in Bigjoiner (Stanislav Lisovskiy)
- Consider OA buffer boundary when zeroing out reports [perf] (Umesh Nerlige Ramappa)
- Remove dead code from gen8_pte_encode (Tvrtko Ursulin)
- Fix one wrong caching mode enum usage (Tvrtko Ursulin)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZK+nHLCltaxoxVw/@tursulin-desk
|
