summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-05mfd: sprd: Add support for SC2730 PMICChunyan Zhang
SC2730 is a PMIC SoC integrated in UMS512. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05dt-bindings: mfd: qcom,tcsr: Document ipq6018 compatibleBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: da9063: Add support for latest EA silicon revisionCarlos de Paula
This update adds new regmap to support the latest EA silicon which will be selected based on the chip and variant information read from the device. Signed-off-by: Carlos de Paula <me@carlosedp.com> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: rk808: Add support for power off on RK817Ondrej Jirman
RK817 has a power-off bit in SYS_CFG3. Add support for powering off the PMIC. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: intel_pmt: Only compile on x86Prarit Bhargava
The intel_pmt driver shows up as a compile option for all arches but is 32-bit and 64-bit x86 specific. Add a CONFIG dependency on X86 for intel_pmt. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05mfd: ti_am335x_tscadc: Fix spelling mistake "atleast" -> "at least"Colin Ian King
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05dt-bindings: mfd: brcm,cru: Add USB 2.0 PHYRafał Miłecki
Northstar's USB 2.0 PHY is part of the CRU MFD. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05dt-bindings: mfd: brcm,cru: Add clkset sysconRafał Miłecki
CRU has a shared register that is used e.g. to control USB 2.0 PHY block access. It's a single 32 b register. Document it as syscon so it can be used with a regmap. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05dt-bindings: mfd: Add Broadcom's MISC blockRafał Miłecki
Broadcom's MISC is an MFD hardware block used on some of their SoCs like bcm63xx and bcm4908. At this point only PCIe reset is fully understood and documented. More functions may be added later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-11-05Merge branches 'ib-mfd-iio-touchscreen-clk-5.16', ↵Lee Jones
'ib-mfd-misc-regulator-5.16' and 'tb-mfd-from-regulator-5.16' into ibs-for-mfd-merged
2021-11-05block: use new bdev_nr_bytes() helper for blkdev_{read,write}_iter()Jens Axboe
We have new helpers for this, use them rather than the slower inode size reads. This makes the read/write path consistent with most of the rest of block as well. Signed-off-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/a72767cd-3c6d-47f7-80f4-aa025a17b2cb@kernel.dk Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-05net: marvell: prestera: fix patchwork build problemsVolodymyr Mytnyk
fix the remaining build issues reported by patchwork in firmware v4.0 support commit which has been already merged. Fix patchwork issues: - source inline - checkpatch Fixes: bb5dbf2cc64d ("net: marvell: prestera: add firmware v4.0 support") Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05amt: remove duplicate include in amt.cZhang Mingyu
'net/protocol.h' included in 'drivers/net/amt.c' is duplicated. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Zhang Mingyu <zhang.mingyu@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05octeontx2-nicvf: fix ioctl callbackArnd Bergmann
The mii ioctls are now handled by the ndo_eth_ioctl() callback, not the old ndo_do_ioctl(), but octeontx2-nicvf introduced the function for the old way. Move it over to ndo_eth_ioctl() to actually allow calling it from user space. Fixes: 43510ef4ddad ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF") Fixes: a76053707dbf ("dev_ioctl: split out ndo_eth_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05ax88796c: fix ioctl callbackArnd Bergmann
The timestamp ioctls are now handled by the ndo_eth_ioctl() callback, not the old ndo_do_ioctl(), but oax88796 introduced the function for the old way. Move it over to ndo_eth_ioctl() to actually allow calling it from user space. Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Fixes: a76053707dbf ("dev_ioctl: split out ndo_eth_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Lukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05MAINTAINERS: Add some information to PARAVIRT_OPS entryJuergen Gross
Most patches for paravirt_ops are going through the tip tree, as those patches tend to touch x86 specific files a lot. Add the x86 ML and the tip tree to the PARAVIRT_OPS MAINTAINERS entry in order to reflect that. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20211104095955.4813-1-jgross@suse.com
2021-11-05ASoC: DAPM: Cover regression by kctl change notification fixTakashi Iwai
The recent fix for DAPM to correct the kctl change notification by the commit 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change notifications") caused other regressions since it changed the behavior of snd_soc_dapm_set_pin() that is called from several API functions. Formerly it returned always 0 for success, but now it returns 0 or 1. This patch addresses it, restoring the old behavior of snd_soc_dapm_set_pin() while keeping the fix in snd_soc_dapm_put_pin_switch(). Fixes: 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change notifications") Reported-by: Yu-Hsuan Hsu <yuhsuan@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-05ASoC: SOF: Intel: hda: fix hotplug when only codec is suspendedKai Vehmanen
If codec is in runtime suspend, but controller is not, hotplug events are missed as the codec has no way to alert the controller. Problem does not occur if both controller and codec are active, or when both are suspended. An easy way to reproduce is to play an audio stream on one codec (e.g. to HDMI/DP display codec), wait for other HDA codec to go to runtime suspend, and then plug in a headset to the suspended codec. The jack event is not reported correctly in this case. Another way to reproduce is to force controller to stay active with "snd_sof_pci.sof_pci_debug=0x1" Fix the issue by reconfiguring the WAKEEN register when powering up/down individual links, and handling control events in the interrupt handler. Fixes: 87fc20e4a0cb ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management") Reported-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211105111655.668777-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-05Merge branch 'for-5.16/xiaomi' into for-linusJiri Kosina
- proper support of Xiaomi Mi buttons (Ilya Skriblovsky)
2021-11-05Merge branch 'for-5.16/wacom' into for-linusJiri Kosina
- improvement of device management handling (Cai Huoqing, Jason Gerecke)
2021-11-05Merge branch 'for-5.16/u2fzero' into for-linusJiri Kosina
- support for new revision of the NitroKey U2F device firmware (Andrej Shadura)
2021-11-05Merge branch 'for-5.16/nintendo' into for-linusJiri Kosina
- support for Nintendo Switch Pro Controllers and Joy-Cons (Daniel J. Ogorchock)
2021-11-05Merge branch 'for-5.16/playstation' into for-linusJiri Kosina
- LED handling improvements (Roderick Colenbrander)
2021-11-05Merge branch 'for-5.16/core' into for-linusJiri Kosina
- update to handle TransducerSerialNumber2 which has been recently added to the specification (Felipe Balbi)
2021-11-05Merge branch 'for-5.16/asus' into for-linusJiri Kosina
2021-11-05Merge branch 'for-5.16/apple' into for-linusJiri Kosina
- support for 2021 Magic Keyboard (Alex Henrie) - tidle key quirk handling improvement (Alex Henrie)
2021-11-05Merge branch 'for-5.16/amd-sfh' into for-linusJiri Kosina
- code cleanups (Basavaraj Natikar, Christophe JAILLET)
2021-11-05PCI: Add ACS quirk for Pericom PI7C9X2G switchesNathan Rossi
The Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 PCIe switches have an erratum for ACS P2P Request Redirect behaviour when used in the cut-through forwarding mode. The recommended work around for this issue is to use the switch in store and forward mode. The erratum results in packets being queued and not being delivered upstream, which can be observed as very poor downstream device performance and/or dropped device-generated data/interrupts. Add a fixup so that when enabling or resuming the downstream port we check if it has enabled ACS P2P Request Redirect, and if so, change the device (via the upstream port) to use the store and forward operating mode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=177471 Link: https://lore.kernel.org/r/20210910025823.196508-1-nathan@nathanrossi.com Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-11-05pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specificUwe Kleine-König
The pwm_ prefix suggests that pwm_busy_wait() is a function provided by the pwm core. Use the otherwise consistently used driver prefix for this function, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindingsWolfram Sang
Add device tree bindings for TPU found on R-Car M3-W+ SoCs. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05dt-bindings: pwm: tpu: Add R-Car V3U device tree bindingsDuc Nguyen
Add device tree bindings for TPU with the PWM controller found on R-Car V3U SoCs. Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: pwm-samsung: Trigger manual update when disabling PWMMårten Lindahl
When duty-cycle is at full level (100%), the TCNTn and TCMPn registers needs to be flushed in order to disable the signal. The PWM manual does not say anything about this, but states that only clearing the TCON auto-reload bit should be needed, and this seems to be true when the PWM duty-cycle is not at full level. This can be observed on an Axis ARTPEC-8, by running: echo <period> > pwm/period echo <period> > pwm/duty_cycle echo 1 > pwm/enable echo 0 > pwm/enable Since the TCNTn and TCMPn registers are activated when enabling the PWM (setting TCON auto-reload bit), and are not touched when disabling the PWM, the double buffered auto-reload function seems to be still active. Lowering duty-cycle, and restoring it again in between the enabling and disabling, makes the disable work since it triggers a reload of the TCNTn and TCMPn registers. Fix this by securing a reload of the TCNTn and TCMPn registers when disabling the PWM and having a full duty-cycle. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: visconti: Simplify using devm_pwmchip_add()zhaoxiao
This allows to drop the platform_driver's remove function. This is the only user of driver data so this can go away, too. Signed-off-by: zhaoxiao <long870912@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: samsung: Describe driver in KconfigKrzysztof Kozlowski
Describe better which driver applies to which SoC, to make configuring kernel for Samsung SoC easier. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: Make it explicit that pwm_apply_state() might sleepUwe Kleine-König
At least some implementations sleep. So mark pwm_apply_state() with a might_sleep() to make callers aware. In the worst case this uncovers a valid atomic user, then we revert this patch and at least gained some more knowledge and then can work on a concept similar to gpio_get_value/gpio_get_value_cansleep. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: Add might_sleep() annotations for !CONFIG_PWM API functionsUwe Kleine-König
The normal implementations of these functions make use of mutexes. To make it obvious that these functions might sleep also add annotations to the dummy implementations in the !CONFIG_PWM case. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05pwm: atmel: Drop unused headerUwe Kleine-König
Since commit 52eaba4cedbd ("pwm: atmel: Rework tracking updates pending in hardware") the driver doesn't make use of mutexes any more, so the header defining these doesn't need to be included. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2021-11-05amt: Fix NULL but dereferenced coccicheck errorYang Li
Eliminate the following coccicheck warning: ./drivers/net/amt.c:2795:6-9: ERROR: amt is NULL but dereferenced. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05net: ax88796c: hide ax88796c_dt_ids if !CONFIG_OFJakub Kicinski
Build bot says: >> drivers/net/ethernet/asix/ax88796c_main.c:1116:34: warning: unused variable 'ax88796c_dt_ids' [-Wunused-const-variable] static const struct of_device_id ax88796c_dt_ids[] = { ^ The only reference to this array is wrapped in of_match_ptr(). Reported-by: kernel test robot <lkp@intel.com> Fixes: a97c69ba4f30 ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05net: udp: correct the document for udp_memMenglong Dong
udp_mem is a vector of 3 INTEGERs, which is used to limit the number of pages allowed for queueing by all UDP sockets. However, sk_has_memory_pressure() in __sk_mem_raise_allocated() always return false for udp, as memory pressure is not supported by udp, which means that __sk_mem_raise_allocated() will fail once pages allocated for udp socket exceeds udp_mem[0]. Therefor, udp_mem[0] is the only one that limit the number of pages. However, the document of udp_mem just express that udp_mem[2] is the limitation. So, just fix it. Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05ALSA: timer: Unconditionally unlink slave instances, tooTakashi Iwai
Like the previous fix (commit c0317c0e8709 "ALSA: timer: Fix use-after-free problem"), we have to unlink slave timer instances immediately at snd_timer_stop(), too. Otherwise it may leave a stale entry in the list if the slave instance is freed before actually running. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211105091517.21733-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-05ALSA: memalloc: Catch call with NULL snd_dma_buffer pointerTakashi Iwai
Although we've covered all calls with NULL dma buffer pointer, so far, there may be still some else in the wild. For catching such a case more easily, add a WARN_ON_ONCE() in snd_dma_get_ops(). Fixes: 37af81c5998f ("ALSA: core: Abstract memory alloc helpers") Link: https://lore.kernel.org/r/20211105102103.28148-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-11-05MAINTAINERS: dri-devel is for all of drivers/gpuDaniel Vetter
Somehow we only have a list of subdirectories, which apparently made it harder for folks to find the gpu maintainers. Fix that. References: https://lore.kernel.org/dri-devel/YXrAAZlxxStNFG%2FK@phenom.ffwll.local/ Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211028170857.4029606-1-daniel.vetter@ffwll.ch
2021-11-05net: ethernet: litex: Remove unnecessary print function dev_err()Xu Wang
The print function dev_err() is redundant because platform_get_irq() already prints an error. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Reviewed-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05drm/udl: fix control-message timeoutJohan Hovold
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)") Cc: stable@vger.kernel.org # 3.4 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20211025115353.5089-1-johan@kernel.org
2021-11-05octeontx2-pf: select CONFIG_NET_DEVLINKArnd Bergmann
The octeontx2 pf nic driver failsz to link when the devlink support is not reachable: aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get': otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate': otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set': otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get': otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv' This is already selected by the admin function driver, but not the actual nic, which might be built-in when the af driver is not. Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05sfc: use swap() to make code cleanerYang Guang
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05octeontx2-af: use swap() to make code cleanerYang Guang
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05tg3: Remove redundant assignmentsluo penghao
The assignment of err will be overwritten next, so this statement should be deleted. The clang_analyzer complains as follows: drivers/net/ethernet/broadcom/tg3.c:5506:2: warning: Value stored to 'expected_sg_dig_ctrl' is never read Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: luo penghao <luo.penghao@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05net/smc: Print function name in smcr_link_down tracepointTony Lu
This makes the output of smcr_link_down tracepoint easier to use and understand without additional translating function's pointer address. It prints the function name with offset: <idle>-0 [000] ..s. 69.087164: smcr_link_down: lnk=00000000dab41cdc lgr=000000007d5d8e24 state=0 rc=1 dev=mlx5_0 location=smc_wr_tx_tasklet_fn+0x5ef/0x6f0 [smc] Link: https://lore.kernel.org/netdev/11f17a34-fd35-f2ec-3f20-dd0c34e55fde@linux.ibm.com/ Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-23 19:21:09 +0000