| Age | Commit message (Collapse) | Author |
|---|
|
Add handlers for the .ndo_hwtstamp_get and .ndo_hwtstamp_set ops which
allow userspace to request timestamp enablement for the device. This
support allows standard Linux applications to request the timestamping
desired.
As with other devices that support timestamping all packets, the driver
will upgrade any request for timestamping of a specific type of packet
to HWTSTAMP_FILTER_ALL.
The current configuration is stored, so that it can be retrieved by
calling .ndo_hwtstamp_get
The Tx timestamps are not implemented yet so calling set ops for
Tx path will end with EOPNOTSUPP error code.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Rx timestamping introduced in PF driver caused the need of refactoring
the VF driver mechanism to check packet fields.
The function to check errors in descriptor has been removed and from
now only previously set struct fields are being checked. The field DD
(descriptor done) needs to be checked at the very beginning, before
extracting other fields.
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Using VIRTCHNL_VF_OFFLOAD_FLEX_DESC, the iAVF driver is capable of
negotiating to enable the advanced flexible descriptor layout. Add the
flexible NIC layout (RXDID=2) as a member of the Rx descriptor union.
Also add bit position definitions for the status and error indications
that are needed.
The iavf_clean_rx_irq function needs to extract a few fields from the Rx
descriptor, including the size, rx_ptype, and vlan_tag.
Move the extraction to a separate function that decodes the fields into
a structure. This will reduce the burden for handling multiple
descriptor types by keeping the relevant extraction logic in one place.
To support handling an additional descriptor format with minimal code
duplication, refactor Rx checksum handling so that the general logic
is separated from the bit calculations. Introduce an iavf_rx_desc_decoded
structure which holds the relevant bits decoded from the Rx descriptor.
This will enable implementing flexible descriptor handling without
duplicating the general logic twice.
Introduce an iavf_extract_flex_rx_fields, iavf_flex_rx_hash, and
iavf_flex_rx_csum functions which operate on the flexible NIC descriptor
format instead of the legacy 32 byte format. Based on the negotiated
RXDID, select the correct function for processing the Rx descriptors.
With this change, the Rx hot path should be functional when using either
the default legacy 32byte format or when we switch to the flexible NIC
layout.
Modify the Rx hot path to add support for the flexible descriptor
format and add request enabling Rx timestamps for all queues.
As in ice, make sure we bump the checksum level if the hardware detected
a packet type which could have an outer checksum. This is important
because hardware only verifies the inner checksum.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The union iavf_32byte_rx_desc consists of two unnamed structs defined
inside. One of them represents legacy 32 byte descriptor and second the
16 byte descriptor (extended to 32 byte). Each of them consists of
bunch of unions, structs and __le fields that represent specific fields
in descriptor.
This commit changes the representation of iavf_32byte_rx_desc union
to store four __le64 fields (qw0, qw1, qw2, qw3) that represent
quad-words. Those quad-words will be then accessed by calling
leXY_get_bits macros in upcoming commits.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Structs idpf_rx_csum_decoded and idpf_rx_extracted are used both in
idpf and iavf Intel drivers. Change the prefix from idpf_* to libeth_*
and move mentioned structs to libeth's rx.h header file.
Adjust usage in idpf driver.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The Rx timestamps reported by hardware may only have 32 bits of storage
for nanosecond time. These timestamps cannot be directly reported to the
Linux stack, as it expects 64bits of time.
To handle this, the timestamps must be extended using an algorithm that
calculates the corrected 64bit timestamp by comparison between the PHC
time and the timestamp. This algorithm requires the PHC time to be
captured within ~2 seconds of when the timestamp was captured.
Instead of trying to read the PHC time in the Rx hotpath, the algorithm
relies on a cached value that is periodically updated.
Keep this cached time up to date by using the PTP .do_aux_work kthread
function.
The iavf_ptp_do_aux_work will reschedule itself about twice a second,
and will check whether or not the cached PTP time needs to be updated.
If so, it issues a VIRTCHNL_OP_1588_PTP_GET_TIME to request the time
from the PF. The jitter and latency involved with this command aren't
important, because the cached time just needs to be kept up to date
within about ~2 seconds.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Implement support for reading the PHC time indirectly via the
VIRTCHNL_OP_1588_PTP_GET_TIME operation.
Based on some simple tests with ftrace, the latency of the indirect
clock access appears to be about ~110 microseconds. This is due to the
cost of preparing a message to send over the virtchnl queue.
This is expected, due to the increased jitter caused by sending messages
over virtchnl. It is not easy to control the precise time that the
message is sent by the VF, or the time that the message is responded to
by the PF, or the time that the message sent from the PF is received by
the VF.
For sending the request, note that many PTP related operations will
require sending of VIRTCHNL messages. Instead of adding a separate AQ
flag and storage for each operation, setup a simple queue mechanism for
queuing up virtchnl messages.
Each message will be converted to a iavf_ptp_aq_cmd structure which ends
with a flexible array member. A single AQ flag is added for processing
messages from this queue. In principle this could be extended to handle
arbitrary virtchnl messages. For now it is kept to PTP-specific as the
need is primarily for handling PTP-related commands.
Use this to implement .gettimex64 using the indirect method via the
virtchnl command. The response from the PF is processed and stored into
the cached_phc_time. A wait queue is used to allow the PTP clock gettime
request to sleep until the message is sent from the PF.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add the iavf_ptp.c file and fill it in with a skeleton framework to
allow registering the PTP clock device.
Add implementation of helper functions to check if a PTP capability
is supported and handle change in PTP capabilities.
Enabling virtual clock would be possible, though it would probably
perform poorly due to the lack of direct time access.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Co-developed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add a new extended capabilities negotiation to exchange information from
the PF about what PTP capabilities are supported by this VF. This
requires sending a VIRTCHNL_OP_1588_PTP_GET_CAPS message, and waiting
for the response from the PF. Handle this early on during the VF
initialization.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Enable support for VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC, to enable the VF
driver the ability to determine what Rx descriptor formats are
available. This requires sending an additional message during
initialization and reset, the VIRTCHNL_OP_GET_SUPPORTED_RXDIDS. This
operation requests the supported Rx descriptor IDs available from the
PF.
This is treated the same way that VLAN V2 capabilities are handled. Add
a new set of extended capability flags, used to process send and receipt
of the VIRTCHNL_OP_GET_SUPPORTED_RXDIDS message.
This ensures we finish negotiating for the supported descriptor formats
prior to beginning configuration of receive queues.
This change stores the supported format bitmap into the iavf_adapter
structure. Additionally, if VIRTCHNL_VF_OFFLOAD_RX_FLEX_DESC is enabled
by the PF, we need to make sure that the Rx queue configuration
specifies the format.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Support for allowing VF to negotiate the descriptor format requires that
the VF specify which descriptor format to use when requesting Rx queues.
The VF is supposed to request the set of supported formats via the new
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS, and then set one of the supported
formats in the rxdid field of the virtchnl_rxq_info structure.
The virtchnl.h header does not provide an enumeration of the format
values. The existing implementations in the PF directly use the values
from the DDP package.
Make the formats explicit by defining an enumeration of the RXDIDs.
Provide an enumeration for the values as well as the bit positions as
returned by the supported_rxdids data from the
VIRTCHNL_OP_GET_SUPPORTED_RXDIDS.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fix from Tejun Heo:
- Fix a regression where a worker pool can be freed before rescuer
workers are done with it leading to user-after-free
* tag 'wq-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Put the pwq after detaching the rescuer from the pool
|
|
To support Rx timestamp offload, VIRTCHNL_OP_1588_PTP_CAPS is sent by
the VF to request PTP capability and responded by the PF what capability
is enabled for that VF.
Hardware captures timestamps which contain only 32 bits of nominal
nanoseconds, as opposed to the 64bit timestamps that the stack expects.
To convert 32b to 64b, we need a current PHC time.
VIRTCHNL_OP_1588_PTP_GET_TIME is sent by the VF and responded by the
PF with the current PHC time.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Co-developed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The clock-names property is required because the driver requests
the clock by name and not the index.
Update the example to use &clk instead of &nf_clk for the clocks
property to avoid confusion with the clock-names property "nf_clk".
Fixes: 1f05f823a16c (dt-bindings: mtd: cadence: convert cadence-nand-controller.txt to yaml)
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix kexec and hibernation when using 5-level page-table configuration
- Remove references to non-existent SF8MM4 and SF8MM8 ID register
fields, hooking up hwcaps for the FPRCVT, F8MM4 and F8MM8 fields
instead
- Drop unused .ARM.attributes ELF sections
- Fix array indexing when probing CPU cache topology from firmware
- Fix potential use-after-free in AMU initialisation code
- Work around broken GTDT entries by tolerating excessively large timer
arrays
- Force use of Rust's "softfloat" target to avoid a threatening warning
about the NEON target feature
- Typo fix in GCS documentation and removal of duplicate Kconfig select
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: rust: clean Rust 1.85.0 warning using softfloat target
arm64: Add missing registrations of hwcaps
ACPI: GTDT: Relax sanity checking on Platform Timers array count
arm64: amu: Delay allocating cpumask for AMU FIE support
arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array
arm64: Handle .ARM.attributes section in linker scripts
arm64/hwcap: Remove stray references to SF8MMx
arm64/gcs: Fix documentation for HWCAP
arm64: Kconfig: Remove selecting replaced HAVE_FUNCTION_GRAPH_RETVAL
arm64: Fix 5-level paging support in kexec/hibernate trampoline
|
|
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home
Fixes: c76883f18e59b ("ring-buffer: Add test if range of boot buffer is valid")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Currently if __tracing_resize_ring_buffer() returns an error, the
tracing_resize_ringbuffer() returns -ENOMEM. But it may not be a memory
issue that caused the function to fail. If the ring buffer is memory
mapped, then the resizing of the ring buffer will be disabled. But if the
user tries to resize the buffer, it will get an -ENOMEM returned, which is
confusing because there is plenty of memory. The actual error returned was
-EBUSY, which would make much more sense to the user.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250213134132.7e4505d7@gandalf.local.home
Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Memory mapping the tracing ring buffer will disable resizing the buffer.
But if there's an error in the memory mapping like an invalid parameter,
the function exits out without re-enabling the resizing of the ring
buffer, preventing the ring buffer from being resized after that.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250213131957.530ec3c5@gandalf.local.home
Fixes: 117c39200d9d7 ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Add support for allowing a VF to enable PTP feature - Rx timestamps
The new capability is gated by VIRTCHNL_VF_CAP_PTP, which must be
set by the VF to request access to the new operations. In addition, the
VIRTCHNL_OP_1588_PTP_CAPS command is used to determine the specific
capabilities available to the VF.
This support includes the following additional capabilities:
* Rx timestamps enabled in the Rx queues (when using flexible advanced
descriptors)
* Read access to PHC time over virtchnl using
VIRTCHNL_OP_1588_PTP_GET_TIME
Extra space is reserved in most structures to allow for future
extension (like set clock, Tx timestamps). Additional opcode numbers
are reserved and space in the virtchnl_ptp_caps structure is
specifically set aside for this.
Additionally, each structure has some space reserved for future
extensions to allow some flexibility.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- core: fix potential memory leak in iopf_queue_remove_device()
- Intel VT-d: handle faults correctly in intel_iommu_drain_pasid_prq()
- AMD-Vi: fix faults happening in resume path
- typo and spelling fixes
* tag 'iommu-fixes-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Make intel_iommu_drain_pasid_prq() cover faults for RID
iommu/exynos: Fix typos
iommu: Fix a spelling error
iommu/amd: Expicitly enable CNTRL.EPHEn bit in resume path
iommu: Fix potential memory leak in iopf_queue_remove_device()
|
|
Syzbot regularly runs into the following warning on arm64:
| WARNING: CPU: 1 PID: 6023 at kernel/workqueue.c:2257 current_wq_worker kernel/workqueue_internal.h:69 [inline]
| WARNING: CPU: 1 PID: 6023 at kernel/workqueue.c:2257 is_chained_work kernel/workqueue.c:2199 [inline]
| WARNING: CPU: 1 PID: 6023 at kernel/workqueue.c:2257 __queue_work+0xe50/0x1308 kernel/workqueue.c:2256
| Modules linked in:
| CPU: 1 UID: 0 PID: 6023 Comm: klogd Not tainted 6.13.0-rc2-syzkaller-g2e7aff49b5da #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
| pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : __queue_work+0xe50/0x1308 kernel/workqueue_internal.h:69
| lr : current_wq_worker kernel/workqueue_internal.h:69 [inline]
| lr : is_chained_work kernel/workqueue.c:2199 [inline]
| lr : __queue_work+0xe50/0x1308 kernel/workqueue.c:2256
[...]
| __queue_work+0xe50/0x1308 kernel/workqueue.c:2256 (L)
| delayed_work_timer_fn+0x74/0x90 kernel/workqueue.c:2485
| call_timer_fn+0x1b4/0x8b8 kernel/time/timer.c:1793
| expire_timers kernel/time/timer.c:1839 [inline]
| __run_timers kernel/time/timer.c:2418 [inline]
| __run_timer_base+0x59c/0x7b4 kernel/time/timer.c:2430
| run_timer_base kernel/time/timer.c:2439 [inline]
| run_timer_softirq+0xcc/0x194 kernel/time/timer.c:2449
The warning is probably because we are trying to queue work into a
destroyed workqueue, but the softirq context makes it hard to pinpoint
the problematic caller.
Extend the warning diagnostics to print both the function we are trying
to queue as well as the name of the workqueue.
Cc: Tejun Heo <tj@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Link: https://syzkaller.appspot.com/bug?extid=e13e654d315d4da1277c
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.14-rc3
- Mukesh and Viken take over maintainership of the Qualcomm I2C
driver.
- Krzysztof Adamski is removed as maintainer of the Axxia I2C
driver.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Three fixes to xen-swiotlb driver:
- two fixes for issues coming up due to another fix in 6.12
- addition of an __init annotation"
* tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/swiotlb: mark xen_swiotlb_fixup() __init
x86/xen: allow larger contiguous memory regions in PV guests
xen/swiotlb: relax alignment requirements
|
|
Fix several issues in partition probing:
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20250214-partition-mac-v1-1-c1c626dffbd5@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case we have to retry the loop, we are missing to unlock+put the
folio. In that case, we will keep failing make_device_exclusive_range()
because we cannot grab the folio lock, and even return from the function
with the folio locked and referenced, effectively never succeeding the
make_device_exclusive_range().
While at it, convert the other unlock+put to use a folio as well.
This was found by code inspection.
Fixes: 8f187163eb89 ("nouveau/svm: implement atomic SVM access")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124181524.3584236-2-david@redhat.com
|
|
OP-TEE supplicant is a user-space daemon and it's possible for it
be hung or crashed or killed in the middle of processing an OP-TEE
RPC call. It becomes more complicated when there is incorrect shutdown
ordering of the supplicant process vs the OP-TEE client application which
can eventually lead to system hang-up waiting for the closure of the
client application.
Allow the client process waiting in kernel for supplicant response to
be killed rather than indefinitely waiting in an unkillable state. Also,
a normal uninterruptible wait should not have resulted in the hung-task
watchdog getting triggered, but the endless loop would.
This fixes issues observed during system reboot/shutdown when supplicant
got hung for some reason or gets crashed/killed which lead to client
getting hung in an unkillable state. It in turn lead to system being in
hung up state requiring hard power off/on to recover.
Fixes: 4fb0a5eb364d ("tee: add OP-TEE driver")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a
dependency on ARCH_MVEBU, to prevent asking the user about these drivers
when configuring a kernel that cannot run on an affected CZ.NIC Turris
system.
Fixes: 992f1a3d4e88498d ("platform: cznic: Add preliminary support for Turris Omnia MCU")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The i.MX System Controller Management Interface firmware is only present
on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale i.MX platform support.
Fixes: 514b2262ade48a05 ("firmware: arm_scmi: Fix i.MX build dependency")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into HEAD
TI K3 defconfig fixes for v6.14
- Enable TISCI Interrupt Router, Interrupt Aggregator and related drivers.
* tag 'ti-k3-config-fixes-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
Link: https://lore.kernel.org/r/20250212112857.pm6ptaqbx545qnv7@eternity
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Sven and I have agreed to share the maintainership for the ARM/APPLE
platform after Marcan's step down. I'm handling the downstream Asahi
Linux tree since April 2024 and worked on or wrote several drivers for
the platform.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250208-maint-soc-apple-v1-1-a7f7337baec0@jannau.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
From discussion in [1] and in-person with Joel, flip my entry from R:
to M:.
Link: https://lore.kernel.org/all/CACPK8Xe8yZLXzEQPp=1D2f0TsKA7hBZG=pHHW6U51FMpp_BiRQ@mail.gmail.com/ [1]
Cc: Joel Stanley <joel@jms.id.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: soc@lists.linux.dev
Cc: linux-aspeed@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into HEAD
Fixes for the IOMMU used together with the PCIe controllers on rk3588,
some board-level fixes for wrong pins, pinctrl and regulators, and
disabling DMA on a board where the DMA+uart causes the dma controller to
hang, as well as improved network stability for the OrangePi R1.
* tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Link: https://lore.kernel.org/r/3004814.3ZeAukHxDK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As defined in the specification, the `controls` field in the configuration
space is only valid/present if VIRTIO_SND_F_CTLS is negotiated.
From https://docs.oasis-open.org/virtio/virtio/v1.3/virtio-v1.3.html:
5.14.4 Device Configuration Layout
...
controls
(driver-read-only) indicates a total number of all available control
elements if VIRTIO_SND_F_CTLS has been negotiated.
Let's use the same style used in virtio_blk.h to clarify this and to avoid
confusion as happened in QEMU (see link).
Link: https://gitlab.com/qemu-project/qemu/-/issues/2805
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250213161825.139952-1-sgarzare@redhat.com
|
|
In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the
logic was converted to using the new folio readahead code, which drops
the reference on the folio once it is locked, using an inferred
reference on the folio. Previously we held a reference on the folio for
the entire duration of the readpages call.
This is fine, however for the case for splice pipe responses where we
will remove the old folio and splice in the new folio (see
fuse_try_move_page()), we assume that there is a reference held on the
folio for ap->folios, which is no longer the case.
To fix this, revert back to __readahead_folio() which allows us to hold
the reference on the folio for the duration of readpages until either we
drop the reference ourselves in fuse_readpages_end() or the reference is
dropped after it's replaced in the page cache in the splice case.
This will fix the UAF bug that was reported.
Link: https://lore.kernel.org/linux-fsdevel/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/
Fixes: 3eab9d7bc2f4 ("fuse: convert readahead to use folios")
Reported-by: Christian Heusel <christian@heusel.eu>
Closes: https://lore.kernel.org/all/2f681f48-00f5-4e09-8431-2b3dbfaa881e@heusel.eu/
Closes: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/110
Reported-by: Mantas Mikulėnas <grawity@gmail.com>
Closes: https://lore.kernel.org/all/34feb867-09e2-46e4-aa31-d9660a806d1a@gmail.com/
Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1236660
Cc: <stable@vger.kernel.org> # v6.13
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the brand new xfstest that tries to swapon on a recently unshared
file and use the chance to document the other bit of magic in this
function.
The big comment is taken from a mailinglist post by Dave Chinner.
Fixes: 5e672cd69f0a53 ("xfs: introduce xfs_inodegc_push()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Match the method name and the naming convention or address_space
operations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Mounting a filesystem that requires quota state changing will generate a
transaction.
We already check for a read-only device; we should do that for
norecovery too.
A quotacheck on a norecovery mount, and with the right log size, will cause
the mount process to hang on:
[<0>] xlog_grant_head_wait+0x5d/0x2a0 [xfs]
[<0>] xlog_grant_head_check+0x112/0x180 [xfs]
[<0>] xfs_log_reserve+0xe3/0x260 [xfs]
[<0>] xfs_trans_reserve+0x179/0x250 [xfs]
[<0>] xfs_trans_alloc+0x101/0x260 [xfs]
[<0>] xfs_sync_sb+0x3f/0x80 [xfs]
[<0>] xfs_qm_mount_quotas+0xe3/0x2f0 [xfs]
[<0>] xfs_mountfs+0x7ad/0xc20 [xfs]
[<0>] xfs_fs_fill_super+0x762/0xa50 [xfs]
[<0>] get_tree_bdev_flags+0x131/0x1d0
[<0>] vfs_get_tree+0x26/0xd0
[<0>] vfs_cmd_create+0x59/0xe0
[<0>] __do_sys_fsconfig+0x4e3/0x6b0
[<0>] do_syscall_64+0x82/0x160
[<0>] entry_SYSCALL_64_after_hwframe+0x76/0x7e
This is caused by a transaction running with bogus initialized head/tail
I initially hit this while running generic/050, with random log
sizes, but I managed to reproduce it reliably here with the steps
below:
mkfs.xfs -f -lsize=1025M -f -b size=4096 -m crc=1,reflink=1,rmapbt=1, -i
sparse=1 /dev/vdb2 > /dev/null
mount -o usrquota,grpquota,prjquota /dev/vdb2 /mnt
xfs_io -x -c 'shutdown -f' /mnt
umount /mnt
mount -o ro,norecovery,usrquota,grpquota,prjquota /dev/vdb2 /mnt
Last mount hangs up
As we add yet another validation if quota state is changing, this also
add a new helper named xfs_qm_validate_state_change(), factoring the
quota state changes out of xfs_qm_newmount() to reduce cluttering
within it.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
If there is corrutpion on the filesystem andxfs_repair
fails to repair it. The last resort of getting the data
is to use norecovery,ro mount. But if the NEEDSREPAIR is
set the filesystem cannot be mounted. The flag must be
cleared out manually using xfs_db, to get access to what
left over of the corrupted fs.
Signed-off-by: Lukas Herbolt <lukas@herbolt.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Coverity noticed that xrep_dinode_bad_metabt_fork never runs because
XFS_DINODE_FMT_META_BTREE is always filtered out in the mode selection
switch of xrep_dinode_check_dfork.
Metadata btrees are allowed only in the data forks of regular files, so
add this case explicitly. I guess this got fubard during a refactoring
prior to 6.13 and I didn't notice until now. :/
Coverity-id: 1617714
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
I received a report from the release engineering side of the house that
xfs_scrub without the -n flag (aka fix it mode) would try to fix a
broken filesystem even on a kernel that doesn't have online repair built
into it:
# xfs_scrub -dTvn /mnt/test
EXPERIMENTAL xfs_scrub program in use! Use at your own risk!
Phase 1: Find filesystem geometry.
/mnt/test: using 1 threads to scrub.
Phase 1: Memory used: 132k/0k (108k/25k), time: 0.00/ 0.00/ 0.00s
<snip>
Phase 4: Repair filesystem.
<snip>
Info: /mnt/test/some/victimdir directory entries: Attempting repair. (repair.c line 351)
Corruption: /mnt/test/some/victimdir directory entries: Repair unsuccessful; offline repair required. (repair.c line 204)
Source: https://blogs.oracle.com/linux/post/xfs-online-filesystem-repair
It is strange that xfs_scrub doesn't refuse to run, because the kernel
is supposed to return EOPNOTSUPP if we actually needed to run a repair,
and xfs_io's repair subcommand will perror that. And yet:
# xfs_io -x -c 'repair probe' /mnt/test
#
The first problem is commit dcb660f9222fd9 (4.15) which should have had
xchk_probe set the CORRUPT OFLAG so that any of the repair machinery
will get called at all.
It turns out that some refactoring that happened in the 6.6-6.8 era
broke the operation of this corner case. What we *really* want to
happen is that all the predicates that would steer xfs_scrub_metadata()
towards calling xrep_attempt() should function the same way that they do
when repair is compiled in; and then xrep_attempt gets to return the
fatal EOPNOTSUPP error code that causes the probe to fail.
Instead, commit 8336a64eb75cba (6.6) started the failwhale swimming by
hoisting OFLAG checking logic into a helper whose non-repair stub always
returns false, causing scrub to return "repair not needed" when in fact
the repair is not supported. Prior to that commit, the oflag checking
that was open-coded in scrub.c worked correctly.
Similarly, in commit 4bdfd7d15747b1 (6.8) we hoisted the IFLAG_REPAIR
and ALREADY_FIXED logic into a helper whose non-repair stub always
returns false, so we never enter the if test body that would have called
xrep_attempt, let alone fail to decode the OFLAGs correctly.
The final insult (yes, we're doing The Naked Gun now) is commit
48a72f60861f79 (6.8) in which we hoisted the "are we going to try a
repair?" predicate into yet another function with a non-repair stub
always returns false.
Fix xchk_probe to trigger xrep_probe if repair is enabled, or return
EOPNOTSUPP directly if it is not. For all the other scrub types, we
need to fix the header predicates so that the ->repair functions (which
are all xrep_notsupported) get called to return EOPNOTSUPP. Commit
48a72 is tagged here because the scrub code prior to LTS 6.12 are
incomplete and not worth patching.
Reported-by: David Flynn <david.flynn@oracle.com>
Cc: <stable@vger.kernel.org> # v6.8
Fixes: 8336a64eb75c ("xfs: don't complain about unfixed metadata when repairs were injected")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
As PD2.0 spec ("6.5.6.2 PSSourceOffTimer")，the PSSourceOffTimer is
used by the Policy Engine in Dual-Role Power device that is currently
acting as a Sink to timeout on a PS_RDY Message during a Power Role
Swap sequence. This condition leads to a Hard Reset for USB Type-A and
Type-B Plugs and Error Recovery for Type-C plugs and return to USB
Default Operation.
Therefore, after PSSourceOffTimer timeout, the tcpm state machine should
switch from PR_SWAP_SNK_SRC_SINK_OFF to ERROR_RECOVERY. This can also
solve the test items in the USB power delivery compliance test:
TEST.PD.PROT.SNK.12 PR_Swap – PSSourceOffTimer Timeout
[1] https://usb.org/document-library/usb-power-delivery-compliance-test-specification-0/USB_PD3_CTS_Q4_2025_OR.zip
Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable <stable@kernel.org>
Signed-off-by: Jos Wang <joswang@lenovo.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Amit Sunil Dhamne <amitsd@google.com>
Link: https://lore.kernel.org/r/20250213134921.3798-1-joswang1221@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The role switch registration and set_role() can happen in parallel as they
are invoked independent of each other. There is a possibility that a driver
might spend significant amount of time in usb_role_switch_register() API
due to the presence of time intensive operations like component_add()
which operate under common mutex. This leads to a time window after
allocating the switch and before setting the registered flag where the set
role notifications are dropped. Below timeline summarizes this behavior
Thread1 | Thread2
usb_role_switch_register() |
| |
---> allocate switch |
| |
---> component_add() | usb_role_switch_set_role()
| | |
| | --> Drop role notifications
| | since sw->registered
| | flag is not set.
| |
--->Set registered flag.|
To avoid this, set the registered flag early on in the switch register
API.
Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The behaviour of kthread_create_worker() was recently changed to align
with the one of kthread_create(). The kthread worker is created but not
awaken by default. This is to allow the use of kthread_affine_preferred()
and kthread_bind[_mask]() with kthread workers. In order to keep the
old behaviour and wake the kthread up, kthread_run_worker() must be
used. All the pre-existing users have been converted, except for UVC
that was introduced in the same merge window as the API change.
This results in hangs:
INFO: task UVCG:82 blocked for more than 491 seconds.
Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1
task:UVCG state:D stack:0 pid:82
Call Trace:
__schedule
schedule
schedule_preempt_disabled
kthread
? kthread_flush_work
ret_from_fork
ret_from_fork_asm
entry_INT80_32
Fix this with converting UVCG kworker to the new API.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com
Fixes: f0bbfbd16b3b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue")
Cc: stable <stable@kernel.org>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Teclast disk used on Huawei hisi platforms doesn't work well,
losing connectivity intermittently if LPM is enabled.
Add quirk disable LPM to resolve the issue.
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250212093829.7379-1-huanglei814@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Roy Luo <royluo@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using USB MIDI, a lock is attempted to be acquired twice through a
re-entrant call to f_midi_transmit, causing a deadlock.
Fix it by using queue_work() to schedule the inner f_midi_transmit() via
a high priority work queue from the completion handler.
Link: https://lore.kernel.org/all/CAArt=LjxU0fUZOj06X+5tkeGT+6RbXzpWg1h4t4Fwa_KGVAX6g@mail.gmail.com/
Fixes: d5daf49b58661 ("USB: gadget: midi: add midi function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Jill Donahue <jilliandonahue58@gmail.com>
Link: https://lore.kernel.org/r/20250211174805.1369265-1-jdonahue@fender.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When usb_control_msg is used in the get_bMaxPacketSize0 function, the
USB pipe does not include the endpoint device number. This can cause
failures when a usb hub port is reinitialized after encountering a bad
cable connection. As a result, the system logs the following error
messages:
usb usb2-port1: cannot reset (err = -32)
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: attempt power cycle
usb 2-1: new high-speed USB device number 5 using ci_hdrc
usb 2-1: device descriptor read/8, error -71
The problem began after commit 85d07c556216 ("USB: core: Unite old
scheme and new scheme descriptor reads"). There
usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike
usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the
macro usb_rcvaddr0pipe, which does not include the endpoint device
number. usb_get_device_descriptor, on the other hand, used the macro
usb_rcvctrlpipe, which includes the endpoint device number.
By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe
instead of usb_rcvaddr0pipe, the issue can be resolved. This change will
ensure that the endpoint device number is included in the USB pipe,
preventing reinitialization failures. If the endpoint has not set the
device number yet, it will still work because the device number is 0 in
udev.
Cc: stable <stable@kernel.org>
Fixes: 85d07c556216 ("USB: core: Unite old scheme and new scheme descriptor reads")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building the test creates binaries 'wait-pipe' and
'sandbox-and-launch' which need to be gitignore'd.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Link: https://lore.kernel.org/r/20250210161101.6024-1-bharadwaj.raju777@gmail.com
[mic: Sort entries]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
|
