| Age | Commit message (Collapse) | Author |
|---|
|
thunderx enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-3-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
ismt enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_region() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Replace the call to sometimes-managed pci_request_region() with one to
the always-managed pcim_request_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417082511.22272-2-phasta@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The driver do support I2C_M_IGNORE_NAK, so add
I2C_FUNC_PROTOCOL_MANGLING to the feature list.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250326-i2c-v1-1-82409ebe9f2b@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Document I2C controllers integrated in RK3528, which are compatible with
the RK3399 variant.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250417120118.17610-4-ziyao@disroot.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Some SMBus controllers may restrict writes to addresses where SPD sensors
may reside. This may lead to some SPD sensors not functioning correctly,
and might need extra handling. Introduce new SPD-instantiating functions
that are aware of this, and use them instead.
Signed-off-by: Yo-Jung Lin (Leo) <leo.lin@canonical.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250430-for-upstream-i801-spd5118-no-instantiate-v2-1-2f54d91ae2c7@canonical.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Document support for the I2C Bus Interface (RIIC) found on the Renesas
RZ/V2N (R9A09G056) SoC. The RIIC IP is identical to that on RZ/V2H(P),
so `renesas,riic-r9a09g057` will be used as a fallback compatible,
enabling reuse of the existing driver without changes.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250501203310.140137-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Implement I2C bus recovery support for the RIIC controller by making use
of software-controlled SCL and SDA line manipulation. The controller allows
forcing SCL and SDA levels through control bits, which enables generation
of manual clock pulses and a stop condition to free a stuck bus.
This implementation wires up the bus recovery mechanism using
i2c_generic_scl_recovery and provides get/set operations for SCL and SDA.
This allows the RIIC driver to recover from bus hang scenarios where SDA
is held low by a slave.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20250501204003.141134-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add compatible string for Sophgo SG2044 SoC I2C controller which can be
used specifically for the SG2044 SoC.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250413223507.46480-9-inochiama@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Each vendor have an items entry of its own compatible, It is needless
and some can be merged as it share the same base "snps,designware-i2c"
compatible.
Merge the duplicate compatible entry into one item entry.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250413223507.46480-2-inochiama@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
For SMBUS block read, do not continue to read if the message length
passed from the device is '0' or greater than the maximum allowed bytes.
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250424053320.19211-1-akhilrajeev@nvidia.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This ensures we get all information we need to debug issues when users
forward us their logs.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-4-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add handling for all the missing error condition, and better recovery in
pasemi_smb_clear().
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
Co-developed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-3-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The hardware (supposedly) has a 25ms timeout for clock stretching
and the driver uses 100ms which should be plenty.
The interrupt path however misses handling for errors while waiting for
the completion and the polling path uses an open-coded readx_poll_timeout.
Note that we drop reg_write(smbus, REG_SMSTA, status) while fixing those
issues here which will be done anyway whenever the next transaction starts
via pasemi_smb_clear.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-2-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The I2C bus can get stuck under some conditions (desync between
controller and device). The pasemi controllers include an unjam feature
that is enabled on reset, but was being disabled by the driver. Keep it
enabled by explicitly setting the UJM bit in the CTL register. This
should help recover the bus from certain conditions, which would
otherwise remain stuck forever.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20250427-pasemi-fixes-v3-1-af28568296c0@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
True is true when greater than '0', no need for double negation
inside the if statement.
Link: https://lore.kernel.org/r/20250418211635.2666234-11-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
If the xfer fails, it indicates a real error. Log it with an
error message instead of a debug message to reflect its severity.
Link: https://lore.kernel.org/r/20250418211635.2666234-10-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Shuffle a bit the code in order to avoid prototypes.
Link: https://lore.kernel.org/r/20250426201920.272135-1-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Adjust the indentation of the bcm_iproc_i2c_slave_init() function
definition to match standard kernel coding style. Don't end the
line with an open parenthesis.
Link: https://lore.kernel.org/r/20250418211635.2666234-8-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Replace udelay(100) with usleep_range(100, 200) as recommended
by kernel documentation. The delay is not in atomic context, so
busy-waiting is unnecessary.
Also update the comment for clarity.
Link: https://lore.kernel.org/r/20250418211635.2666234-7-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Drop an unnecessary blank line in bcm_iproc_i2c_slave_isr().
Link: https://lore.kernel.org/r/20250418211635.2666234-6-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Alignment should match the open parenthesis but in some places it
didn't
Link: https://lore.kernel.org/r/20250418211635.2666234-5-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
In the kernel u32 should be used instead of unit32_t.
Link: https://lore.kernel.org/r/20250418211635.2666234-4-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Use dev_err_probe() instead of dev_err() and then return.
Link: https://lore.kernel.org/r/20250418211635.2666234-3-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The 'ret' variable doesn't need to be initialised, as it is
always assigned before use.
While here, reorder the variable declarations in reverse
Christmas tree style, by line length.
Link: https://lore.kernel.org/r/20250418211635.2666234-2-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The camera sensor is connected via ISP I2C bus in AMD SOC
architectures. Add new I2C designware driver to support
new camera sensors on AMD HW.
Co-developed-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Signed-off-by: Venkata Narendra Kumar Gutta <vengutta@amd.com>
Co-developed-by: Bin Du <bin.du@amd.com>
Signed-off-by: Bin Du <bin.du@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250424184952.1290019-1-pratap.nirujogi@amd.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add support for the MediaTek Dimensity 1200 (MT6893) SoC; this
chip's multiple I2C controller instances are fully compatible
with the ones found in the MT8192 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120303.148017-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add functions to perform block read and write operations. This applies
for cases where the requested operation is for >8 bytes of data.
When not using the block mode transfer, the driver will attempt a series
of 8 byte i2c operations until it reaches the desired total. For
example, for a 40 byte request the driver will complete 5 separate
transactions. This results in large transactions taking a significant
amount of time to process.
Add block mode such that the driver can request larger transactions, up
to 1024 bytes per transfer.
Many aspects of the block mode transfer is common with the regular 8
byte operations. Use generic functions for parts of the message
construction and sending the message. The key difference for the block
mode is the usage of separate FIFO buffer to store data.
Write to this buffer in the case of a write (before command send).
Read from this buffer in the case of a read (after command send).
Data is written into this buffer by placing data into the MSB onwards.
This means the bottom 8 bits of the data will match the top 8 bits, and
so on and so forth.
Set specific bits in message for block mode, enable block mode transfers
from global i2c management registers, construct message, send message,
read or write from FIFO buffer as required.
The block-mode transactions result in a significant speed increase in
large i2c requests.
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20250324192946.3078712-2-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
No functional changes.
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250415-pasemi-fixes-v2-2-c543bf53151a@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
When changing the #defines to use BIT and GENMASK the bitfield.h include
was added instead of the correct bits.h include.
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250415-pasemi-fixes-v2-1-c543bf53151a@svenpeter.dev
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
When we use constants in a time or frequency related contexts,
it's better to utilise the respective definitions that have
encoded units in them. This will make code better to read and
understand.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250416101702.2128740-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-11-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-10-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-8-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-7-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-6-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-4-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-3-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
This simplifies the code while improving log.
Signed-off-by: Enrico Zanda <e.zanda1@gmail.com>
Link: https://lore.kernel.org/r/20250415183447.396277-2-e.zanda1@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
During init of the bus, the module checks that the bus is idle.
If one of the lines are stuck try to recover them first before failing.
Sometimes SDA and SCL are low if improper reset occurs (e.g., reboot).
Signed-off-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Mohammed Elbadry <mohammed.0.elbadry@gmail.com>
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250328193252.1570811-1-mohammed.0.elbadry@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
'struct i2c_algorithm' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
11027 646 16 11689 2da9 drivers/i2c/busses/i2c-rzv2m.o
After:
=====
text data bss dec hex filename
11107 566 16 11689 2da9 drivers/i2c/busses/i2c-rzv2m.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/537d93441ced53bffa6553b8ec93d007e64cb9a5.1743258995.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add corresponding error messages if DMA channels are not available during
probe. Using dev_err_probe adds deferred probe messages as well.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250408100300.556703-1-alexander.stein@ew.tq-group.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The PCC driver now handles mapping and unmapping of shared memory
areas as part of pcc_mbox_{request,free}_channel(). Without these before,
this xgene-slimpro I2C driver did handling of those mappings like several
other PCC mailbox client drivers.
There were redundant operations, leading to unnecessary code. Maintaining
the consistency across these driver was harder due to scattered handling
of shmem.
Just use the mapped shmem and remove all redundant operations from this
driver.
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: linux-i2c@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411112303.1149086-1-sudeep.holla@arm.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Add check for the return value of clk_enable() to catch
the potential error.
This is similar to the commit 8332e6670997
("spi: zynq-qspi: Add check for clk_enable()").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250412193713.105838-1-chenyuan0y@gmail.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Return value from npcm_i2c_get_slave_addr() directly instead of taking
this in another redundant variable.
This improvement has been suggested by Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Zhang Songyi <zhang.songyi@zte.com.cn>
Link: https://lore.kernel.org/r/20250320004321.1914366-1-andi.shyti@kernel.org
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Since we have generic definitions for bus frequencies, let's use them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org>
Reviewed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Link: https://lore.kernel.org/r/20250322144736.472777-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"This has a bunch of idxd driver fixes, dmatest revert and bunch of
smaller driver fixes:
- a bunch of idxd potential mem leak fixes
- dmatest revert for waiting for interrupt fix as that causes issue
- a couple of ti k3 udma fixes for locking and cap_mask
- mediatek deadlock fix and unused variable cleanup fix"
* tag 'dmaengine-fix-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: mediatek: drop unused variable
dmaengine: fsl-edma: Fix return code for unhandled interrupts
dmaengine: mediatek: Fix a possible deadlock error in mtk_cqdma_tx_status()
dmaengine: idxd: Fix ->poll() return value
dmaengine: idxd: Refactor remove call with idxd_cleanup() helper
dmaengine: idxd: Add missing idxd cleanup to fix memory leak in remove call
dmaengine: idxd: fix memory leak in error handling path of idxd_pci_probe
dmaengine: idxd: fix memory leak in error handling path of idxd_alloc
dmaengine: idxd: Add missing cleanups in cleanup internals
dmaengine: idxd: Add missing cleanup for early error out in idxd_setup_internals
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_groups
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_engines
dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs
dmaengine: ptdma: Move variable condition check to the first place and remove redundancy
dmaengine: idxd: Fix allowing write() from different address spaces
dmaengine: ti: k3-udma: Add missing locking
dmaengine: ti: k3-udma: Use cap_mask directly from dma_device structure instead of a local copy
dmaengine: Revert "dmaengine: dmatest: Fix dmatest waiting less when interrupted"
dmaengine: idxd: cdev: Fix uninitialized use of sva in idxd_cdev_open
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
"A bunch of renesas fixes and few smaller fixes in other drivers:
- Rensas fixes for unbind ole detection, irq, locking etc
- tegra fixes for error handling at init and UTMI power states and
stray unlock fix
- rockchip missing assignment and pll output fixes
- startfive usb host detection fixes"
* tag 'phy-fixes-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: Fix error handling in tegra_xusb_port_init
phy: renesas: rcar-gen3-usb2: Set timing registers only once
phy: renesas: rcar-gen3-usb2: Assert PLL reset on PHY power off
phy: renesas: rcar-gen3-usb2: Lock around hardware registers and driver data
phy: renesas: rcar-gen3-usb2: Move IRQ request in probe
phy: renesas: rcar-gen3-usb2: Fix role detection on unbind/bind
phy: tegra: xusb: remove a stray unlock
phy: phy-rockchip-samsung-hdptx: Fix PHY PLL output 50.25MHz error
phy: starfive: jh7110-usb: Fix USB 2.0 host occasional detection failure
phy: rockchip-samsung-dcphy: Add missing assignment
phy: can-transceiver: Re-instate "mux-states" property presence check
phy: qcom-qmp-ufs: check for mode type for phy setting
phy: tegra: xusb: Use a bitmask for UTMI pad power state tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire fix from Vinod Koul:
- Fix for irq domain creation race in the core
* tag 'soundwire-6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: Fix race on the creation of the IRQ domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Nine singleton hotfixes, all MM. Four are cc:stable"
* tag 'mm-hotfixes-stable-2025-05-17-09-41' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: userfaultfd: correct dirty flags set for both present and swap pte
zsmalloc: don't underflow size calculation in zs_obj_write()
mm/page_alloc: fix race condition in unaccepted memory handling
mm/page_alloc: ensure try_alloc_pages() plays well with unaccepted memory
MAINTAINERS: add mm GUP section
mm/codetag: move tag retrieval back upfront in __free_pages()
mm/memory: fix mapcount / refcount sanity check for mTHP reuse
kernel/fork: only call untrack_pfn_clear() on VMAs duplicated for fork()
mm: hugetlb: fix incorrect fallback for subpool
|
