| Age | Commit message (Collapse) | Author |
|---|
|
Check that suppression is not indicated on injection of a key checked
protection exception caused by a memop after it already modified guest
memory, as that violates the definition of suppression.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512131019.2594948-3-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
If user space uses a memop to emulate an instruction and that
memop fails, the execution of the instruction ends.
Instruction execution can end in different ways, one of which is
suppression, which requires that the instruction execute like a no-op.
A writing memop that spans multiple pages and fails due to key
protection may have modified guest memory, as a result, the likely
correct ending is termination. Therefore, do not indicate a
suppressing instruction ending in this case.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512131019.2594948-2-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Adds some selftests to test ioctl error paths of the uv-uapi.
The Kconfig S390_UV_UAPI must be selected and the Ultravisor facility
must be available. The test can be executed by non-root, however, the
uvdevice special file /dev/uv must be accessible for reading and
writing which may imply root privileges.
./test-uv-device
TAP version 13
1..6
# Starting 6 tests from 3 test cases.
# RUN uvio_fixture.att.fault_ioctl_arg ...
# OK uvio_fixture.att.fault_ioctl_arg
ok 1 uvio_fixture.att.fault_ioctl_arg
# RUN uvio_fixture.att.fault_uvio_arg ...
# OK uvio_fixture.att.fault_uvio_arg
ok 2 uvio_fixture.att.fault_uvio_arg
# RUN uvio_fixture.att.inval_ioctl_cb ...
# OK uvio_fixture.att.inval_ioctl_cb
ok 3 uvio_fixture.att.inval_ioctl_cb
# RUN uvio_fixture.att.inval_ioctl_cmd ...
# OK uvio_fixture.att.inval_ioctl_cmd
ok 4 uvio_fixture.att.inval_ioctl_cmd
# RUN attest_fixture.att_inval_request ...
# OK attest_fixture.att_inval_request
ok 5 attest_fixture.att_inval_request
# RUN attest_fixture.att_inval_addr ...
# OK attest_fixture.att_inval_addr
ok 6 attest_fixture.att_inval_addr
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220510144724.3321985-3-seiden@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220510144724.3321985-3-seiden@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.
The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> (whitespace and tristate fixes, pick)
|
|
Some (most?) drivers emit the inactive state when the PWM is disabled.
However there are exceptions, so document that a consumer better doesn't
depend on this behaviour.
Some known exceptions:
- imx27 emits 0 independent of the configured polarity
- mxs just drives the output to the last emitted state.
- iqs620a makes the output tristated on disable, so an external
pull-down would be required.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This pushes a variant of pwm_apply_legacy into the driver that was slightly
simplified because the .set_polarity callback was a noop.
There is no change in behavior.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The MediaTek Helio X10 MT6795 SoC has 7 PWMs: add a compatible string
to use the right match data.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Add binding documentation for the MT6795 Helio X10 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local cm_wq.
Link: https://lore.kernel.org/r/22f7183b-cc16-5a34-e879-7605f5efc6e6@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Dividing by the result of a division looses precision because the result is
rounded twice. E.g. with clk_rate = 48000000 and period = 32760033 the
following numbers result:
rate = pc->clk_rate >> PWM_DUTY_WIDTH = 187500
hz = DIV_ROUND_CLOSEST_ULL(100ULL * NSEC_PER_SEC, period_ns) = 3052
rate = DIV_ROUND_CLOSEST_ULL(100ULL * rate, hz) = 6144
The exact result would be 6142.5061875 and (apart from rounding) this is
found by using a single division. As a side effect is also a tad
cheaper to calculate.
Also using clk_rate >> PWM_DUTY_WIDTH looses precision. Consider for
example clk_rate = 47999999 and period = 106667:
mul_u64_u64_div_u64(pc->clk_rate >> PWM_DUTY_WIDTH, period_ns,
NSEC_PER_SEC) = 19
mul_u64_u64_div_u64(pc->clk_rate, period_ns,
NSEC_PER_SEC << PWM_DUTY_WIDTH) = 20
(The exact result is 20.000062083332033.)
With this optimizations also switch from round-closest to round-down for
the period calculation. Given that the calculations were non-optimal for
quite some time now with variations in both directions which nobody
reported as a problem, this is the opportunity to align the driver's
behavior to the requirements of new drivers. This has several upsides:
- Implementation is easier as there are no round-nearest variants of
mul_u64_u64_div_u64().
- Requests for too small periods are now consistently refused. This was
kind of arbitrary before, where period_ns < min_period_ns was
refused, but in some cases min_period_ns isn't actually implementable
and then values between min_period_ns and the actual minimum were
rounded up to the actual minimum.
Note that the duty_cycle calculation isn't using the usual round-down
approach yet.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Dividing by the result of a division looses precision. Consider for example
clk_rate = 33000000 and period_ns = 500001. Then
clk_rate / (NSEC_PER_SEC / period_ns)
has the exact value 16500.033, but in C this evaluates to 16508. It gets
worse for even bigger values of period_ns, so with period_ns = 500000001,
the exact result is 16500000.033 while in C we get 33000000.
For that reason use
clk_rate * period_ns / NSEC_PER_SEC
instead which doesn't suffer from this problem. To ensure this doesn't
overflow add a safeguard check for clk_rate.
Note that duty > period can never happen, so the respective check can be
dropped.
Incidentally this fixes a division by zero if period_ns > NSEC_PER_SEC.
Another side effect is that values bigger than INT_MAX for period and
duty_cyle are not wrongly discarded any more.
Fixes: 99b82abb0a35 ("pwm: Add Renesas TPU PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The newly computed register values are intended to exactly match the
previously computed values. The main improvement is that the prescaler
is computed without a loop that involves two divisions in each step.
This uses the fact, that prescalers[i] = 1 << (2 * i).
Assuming a moderately smart compiler, the needed number of divisions for
the case where the requested period is too big, is reduced from 5 to 2.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The driver used "pwm" for struct tpu_pwm_device pointers. This name is
usually only used for struct pwm_device pointers which this driver calls
"_pwm". So rename to the driver data pointers to "tpd" which then allows
to drop the underscore from "_pwm".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
As pwm->state might not be updated in tpu_pwm_apply() before calling
tpu_pwm_config(), an additional parameter is needed for tpu_pwm_config()
to not change the implemented logic.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
This simplifies an error path in .probe() and allows to drop the .remove()
function.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The added benefit is that the error code is mentioned in the error message
and its usage is a bit more compact than open coding it. This also
improves behaviour in case devm_clk_get() returns -EPROBE_DEFER.
While touching this code, consistently start error messages with upper
case.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
The commit 94dbfd6781a0e87b ("perf parse-events: Architecture specific
leader override") introduced a feature to reorder the slots event to
fulfill the restriction of the perf metrics topdown group. But the
feature doesn't work on the hybrid machine.
$ perf stat -e "{cpu_core/instructions/,cpu_core/slots/,cpu_core/topdown-retiring/}" -a sleep 1
Performance counter stats for 'system wide':
<not counted> cpu_core/instructions/
<not counted> cpu_core/slots/
<not supported> cpu_core/topdown-retiring/
1.002871801 seconds time elapsed
A hybrid platform has a different PMU name for the core PMUs, while
current perf hard code the PMU name "cpu".
Introduce a new function to check whether the system supports the perf
metrics feature. The result is cached for the future usage.
For X86, the core PMU name always has "cpu" prefix.
With the patch:
$ perf stat -e "{cpu_core/instructions/,cpu_core/slots/,cpu_core/topdown-retiring/}" -a sleep 1
Performance counter stats for 'system wide':
76,337,010 cpu_core/slots/
10,416,809 cpu_core/instructions/
11,692,372 cpu_core/topdown-retiring/
1.002805453 seconds time elapsed
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-5-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The evsel->name may have a different format for a topdown event, a pure
topdown name (e.g., topdown-fe-bound), or a PMU name + a topdown name
(e.g., cpu/topdown-fe-bound/). The cpu/topdown-fe-bound/ kind format
isn't supported by the arch_evlist__leader(). This format is a very
common format for a hybrid platform, which requires specifying the PMU
name for each event.
Without the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> instructions
<not counted> slots
<not supported> cpu/topdown-fe-bound/
1.003482041 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The events in group usually have to be from the same PMU. Try reorganizing the group.
With the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
157,383,996 slots
25,011,711 instructions
27,441,686 cpu/topdown-fe-bound/
1.003530890 seconds time elapsed
Fixes: bc355822f0d9623b ("perf parse-events: Move slots only with topdown")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If any member in a group has a different cpu mask than the other
members, the current perf stat disables group. when the perf metrics
topdown events are part of the group, the below <not supported> error
will be triggered.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
141,465,174 slots
<not supported> topdown-retiring
1,605,330,334 uncore_imc_free_running_0/dclk/
The perf metrics topdown events must always be grouped with a slots
event as leader.
Factor out evsel__remove_from_group() to only remove the regular events
from the group.
Remove evsel__must_be_in_group(), since no one use it anymore.
With the patch, the topdown events aren't broken from the group for the
splitting.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
346,110,588 slots
124,608,256 topdown-retiring
1,606,869,976 uncore_imc_free_running_0/dclk/
1.003877592 seconds time elapsed
Fixes: a9a1790247bdcf3b ("perf stat: Ensure group is defined on top of the same cpu mask")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The patch ("perf evlist: Keep topdown counters in weak group") fixes the
perf metrics topdown event issue when the topdown events are in a weak
group on a non-hybrid platform. However, it doesn't work for the hybrid
platform.
$./perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
751,765,068 cpu_core/slots/ (84.07%)
<not supported> cpu_core/topdown-bad-spec/
<not supported> cpu_core/topdown-be-bound/
<not supported> cpu_core/topdown-fe-bound/
<not supported> cpu_core/topdown-retiring/
12,398,197 cpu_core/branch-instructions/ (84.07%)
1,054,218 cpu_core/branch-misses/ (84.24%)
539,764,637 cpu_core/bus-cycles/ (84.64%)
14,683 cpu_core/cache-misses/ (84.87%)
7,277,809 cpu_core/cache-references/ (77.30%)
222,299,439 cpu_core/cpu-cycles/ (77.28%)
63,661,714 cpu_core/instructions/ (84.85%)
0 cpu_core/mem-loads/ (77.29%)
12,271,725 cpu_core/mem-stores/ (77.30%)
542,241,102 cpu_core/ref-cycles/ (84.85%)
8,854 cpu_core/cache-misses/ (76.71%)
7,179,013 cpu_core/cache-references/ (76.31%)
1.003245250 seconds time elapsed
A hybrid platform has a different PMU name for the core PMUs, while
the current perf hard code the PMU name "cpu".
The evsel->pmu_name can be used to replace the "cpu" to fix the issue.
For a hybrid platform, the pmu_name must be non-NULL. Because there are
at least two core PMUs. The PMU has to be specified.
For a non-hybrid platform, the pmu_name may be NULL. Because there is
only one core PMU, "cpu". For a NULL pmu_name, we can safely assume that
it is a "cpu" PMU.
In case other PMUs also define the "slots" event, checking the PMU type
as well.
With the patch,
$ perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
766,620,266 cpu_core/slots/ (84.06%)
73,172,129 cpu_core/topdown-bad-spec/ # 9.5% bad speculation (84.06%)
193,443,341 cpu_core/topdown-be-bound/ # 25.0% backend bound (84.06%)
403,940,929 cpu_core/topdown-fe-bound/ # 52.3% frontend bound (84.06%)
102,070,237 cpu_core/topdown-retiring/ # 13.2% retiring (84.06%)
12,364,429 cpu_core/branch-instructions/ (84.03%)
1,080,124 cpu_core/branch-misses/ (84.24%)
564,120,383 cpu_core/bus-cycles/ (84.65%)
36,979 cpu_core/cache-misses/ (84.86%)
7,298,094 cpu_core/cache-references/ (77.30%)
227,174,372 cpu_core/cpu-cycles/ (77.31%)
63,886,523 cpu_core/instructions/ (84.87%)
0 cpu_core/mem-loads/ (77.31%)
12,208,782 cpu_core/mem-stores/ (77.31%)
566,409,738 cpu_core/ref-cycles/ (84.87%)
23,118 cpu_core/cache-misses/ (76.71%)
7,212,602 cpu_core/cache-references/ (76.29%)
1.003228667 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local isert_login_wq.
Link: https://lore.kernel.org/r/fbe5e9a8-0110-0c22-b7d6-74d53948d042@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Kernel doc validator is not happy:
pinctrl-intel.c:865: warning: No description found for return value of 'intel_gpio_to_pin'
pinctrl-intel.c:904: warning: No description found for return value of 'intel_pin_to_gpio'
2 warnings
Add return sections to the kernel documentation of the above mentioned
functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
The size check for state->period is moved to .apply() to make sure that
the values of state->duty_cycle and state->period are passed to
pwm_samsung_config without change while they are discarded to int.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
From the kernel point of view there are only few ops that needs to be exposed:
Hi,
SOF is using dma-trace (or dtrace) as a firmware tracing method, which is only
supported with IPC3 and it is not applicable for IPC4.
Currently the dtrace is 'open managed' regardless of IPC version (we do force
disable it for IPC4, but the dtrace calls remain in place).
From the kernel point of view there are only few ops that needs to be exposed
by the firmware tracing support and everything else is IPC private, should not
be known by the core.
This series converts the current dma-trace as ipc3 specific firmware tracing
sub-component and moves all private data out from generic code.
Regards,
Peter
---
Peter Ujfalusi (8):
ASoC: SOF: Introduce IPC independent ops for firmware tracing support
ASoC: SOF: Rename dtrace_is_supported flag to fw_trace_is_supported
ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing
implementation
ASoC: SOF: Switch to IPC generic firmware tracing
ASoC: SOF: ipc3-dtrace: Move host ops wrappers from generic header to
private
ASoC: SOF: Modify the host trace_init parameter list to include dmab
ASoC: SOF: Introduce opaque storage of private data for firmware
tracing
ASoC: SOF: ipc3-dtrace: Move dtrace related variables local from
sof_dev
sound/soc/sof/Makefile | 1 +
sound/soc/sof/amd/acp-trace.c | 4 +-
sound/soc/sof/amd/acp.h | 2 +-
sound/soc/sof/core.c | 13 +-
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/intel/hda-dsp.c | 2 +-
sound/soc/sof/intel/hda-trace.c | 4 +-
sound/soc/sof/intel/hda.h | 2 +-
sound/soc/sof/ipc.c | 6 +
sound/soc/sof/ipc3-dtrace.c | 649 ++++++++++++++++++++++++++++++++
sound/soc/sof/ipc3-priv.h | 38 ++
sound/soc/sof/ipc3.c | 3 +-
sound/soc/sof/ops.c | 2 +-
sound/soc/sof/ops.h | 26 --
sound/soc/sof/pm.c | 8 +-
sound/soc/sof/sof-priv.h | 53 +--
sound/soc/sof/trace.c | 621 ++----------------------------
17 files changed, 767 insertions(+), 669 deletions(-)
create mode 100644 sound/soc/sof/ipc3-dtrace.c
--
2.36.1
|
|
Renamed hte dt binding directory to timestamp according review comment.
Addressed minor comment about having HTE acronym first in the common dt
binding document.
The change reflects above renaming in MAINTAINERS files too.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The "free_name" variable is sometimes used without being initialized.
Fixes: 31ab09b42188 ("drivers: Add hardware timestamp engine (HTE) subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.
Add the CPU to index translation, alongside validity checking.
Discussion thread:
https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/
Fixes: 7ac0089d138f80dc ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The splat below can be seen when running kvm-unit-test:
=============================
WARNING: suspicious RCU usage
5.18.0-rc7 #5 Tainted: G IOE
-----------------------------
/home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
4 locks held by qemu-system-x86/35124:
#0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm]
#1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm]
#2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm]
#3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm]
stack backtrace:
CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5
Call Trace:
<TASK>
dump_stack_lvl+0x6c/0x9b
irqfd_resampler_ack+0xfd/0x110 [kvm]
kvm_notify_acked_gsi+0x32/0x90 [kvm]
kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm]
kvm_hv_set_msr_common+0xec1/0x1160 [kvm]
kvm_set_msr_common+0x7c3/0xf60 [kvm]
vmx_set_msr+0x394/0x1240 [kvm_intel]
kvm_set_msr_ignored_check+0x86/0x200 [kvm]
kvm_emulate_wrmsr+0x4f/0x1f0 [kvm]
vmx_handle_exit+0x6fb/0x7e0 [kvm_intel]
vcpu_enter_guest+0xe5a/0x1900 [kvm]
kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm]
kvm_vcpu_ioctl+0x279/0x710 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix
the false positive by using list_for_each_entry_srcu().
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1652950153-12489-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
for-5.19/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.19
- set non-mdts limits in nvme_scan_work (Chaitanya Kulkarni)
- add support for TP4084 - Time-to-Ready Enhancements (me)"
* tag 'nvme-5.19-2022-05-19' of git://git.infradead.org/nvme:
nvme: set non-mdts limits in nvme_scan_work
nvme: add support for TP4084 - Time-to-Ready Enhancements
|
|
Avi Kivity reported a problem where the __weak
btf__load_from_kernel_by_id() in tools/perf/util/bpf-event.c was being
used and it called btf__get_from_id() in tools/lib/bpf/btf.c that in
turn called back to btf__load_from_kernel_by_id(), resulting in an
endless loop.
Fix this by adding a feature test to check if
btf__load_from_kernel_by_id() is available when building perf with
LIBBPF_DYNAMIC=1, and if not then provide the fallback to the old
btf__get_from_id(), that doesn't call back to btf__load_from_kernel_by_id()
since at that time it didn't exist at all.
Tested on Fedora 35 where we have libbpf-devel 0.4.0 with LIBBPF_DYNAMIC
where we don't have btf__load_from_kernel_by_id() and thus its feature
test fail, not defining HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID:
$ cat /tmp/build/perf-urgent/feature/test-libbpf-btf__load_from_kernel_by_id.make.output
test-libbpf-btf__load_from_kernel_by_id.c: In function ‘main’:
test-libbpf-btf__load_from_kernel_by_id.c:6:16: error: implicit declaration of function ‘btf__load_from_kernel_by_id’ [-Werror=implicit-function-declaration]
6 | return btf__load_from_kernel_by_id(20151128, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
$ nm /tmp/build/perf-urgent/perf | grep btf__load_from_kernel_by_id
00000000005ba180 T btf__load_from_kernel_by_id
$
$ objdump --disassemble=btf__load_from_kernel_by_id -S /tmp/build/perf-urgent/perf
/tmp/build/perf-urgent/perf: file format elf64-x86-64
<SNIP>
00000000005ba180 <btf__load_from_kernel_by_id>:
#include "record.h"
#include "util/synthetic-events.h"
#ifndef HAVE_LIBBPF_BTF__LOAD_FROM_KERNEL_BY_ID
struct btf *btf__load_from_kernel_by_id(__u32 id)
{
5ba180: 55 push %rbp
5ba181: 48 89 e5 mov %rsp,%rbp
5ba184: 48 83 ec 10 sub $0x10,%rsp
5ba188: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
5ba18f: 00 00
5ba191: 48 89 45 f8 mov %rax,-0x8(%rbp)
5ba195: 31 c0 xor %eax,%eax
struct btf *btf;
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
int err = btf__get_from_id(id, &btf);
5ba197: 48 8d 75 f0 lea -0x10(%rbp),%rsi
5ba19b: e8 a0 57 e5 ff call 40f940 <btf__get_from_id@plt>
5ba1a0: 89 c2 mov %eax,%edx
#pragma GCC diagnostic pop
return err ? ERR_PTR(err) : btf;
5ba1a2: 48 98 cltq
5ba1a4: 85 d2 test %edx,%edx
5ba1a6: 48 0f 44 45 f0 cmove -0x10(%rbp),%rax
}
<SNIP>
Fixes: 218e7b775d368f38 ("perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions")
Reported-by: Avi Kivity <avi@scylladb.com>
Link: https://lore.kernel.org/linux-perf-users/f0add43b-3de5-20c5-22c4-70aff4af959f@scylladb.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/linux-perf-users/YobjjFOblY4Xvwo7@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
max98090_put_enab_tlv()
Validation of signed input should be done before casting to unsigned int.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Suggested-by: Mark Brown <broonie@kernel.org>
Fixes: 2fbe467bcbfc ("ASoC: max98090: Reject invalid values in custom control put()")
Link: https://lore.kernel.org/r/1652999486-29653-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The driver missed the default value of register 0xc320.
This patch adds that default value to avoid the error messages
when the driver went to suspend mode already.
BugLink: https://github.com/thesofproject/linux/issues/3651
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20220520090205.25857-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add two new opcodes that userspace can use for admin commands:
NVME_URING_CMD_ADMIN : non-vectroed
NVME_URING_CMD_ADMIN_VEC : vectored variant
Wire up support when these are issued on controller node(/dev/nvmeX).
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-3-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Factor out a helper consolidating the error checks, and fix typo in a
comment too. This is in preparation to support admin commands on this
path.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220520090630.70394-2-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We get new interesting formating with clang-format greater or equal to 6
as stated in the removed comments. Miguel Ojeda suggested to even move
the minimal clang-format version to 11, which is the minimum LLVM
supported at the moment [1].
Automatically updated with:
sed -i 's/^\(\s*\)#\(\S*\s\+\S*\) # Unknown to clang-format.*/\1\2/' .clang-format
Link: https://lore.kernel.org/r/CANiq72nLOfmEt-CZBmm2ouEB_x6Jm9ggDVFCVJxYxKw7O0LTzQ@mail.gmail.com [1]
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-3-mic@digikod.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add tools/ to the shell fragment generating the for_each list and update
it. This is useful to format files in the tools directory (e.g.
selftests) with the same coding style as the kernel.
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220506160106.522341-2-mic@digikod.net
[Reworded and rebased on top of previous commits]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Convert the rk808 bindings into yaml format. clock-output-names varies
in maxItems depending on whether or not the clock-cells is 0 or 1. For
the rk805, rk809, and rk817. This preserves behavior with the existing
driver handling setting the clock for these specific PMICs. When this
driver is corrected and the devicetrees updated this logic can be
removed (since the rk805, rk808, and rk817 only have one actual clock).
Note this patch was previously sent as a series, all of the patches in
the series except this one have been committed to mainline.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com
|
|
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
This avoids differences when different people run the command,
which is relevant for our use case, e.g.:
$ LC_ALL=en_US.UTF-8 sort test
ata_for_each_link
__ata_qc_for_each
ata_qc_for_each
$ LC_ALL=C sort test
__ata_qc_for_each
ata_for_each_link
ata_qc_for_each
Link: https://lore.kernel.org/lkml/CANiq72=7=ZpAObWRmposOmnyZ8XR_eNHCBtA3bu3fusmcPUwDA@mail.gmail.com/
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
NAND core:
* Print offset instead of page number for bad blocks
Raw NAND controller drivers:
* Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe()
* CS553X: simplify the return expression of cs553x_write_ctrl_byte()
* Davinci: Remove redundant unsigned comparison to zero
* Denali: Use managed device resources
* GPMI:
- Add large oob bch setting support
- Rename the variable ecc_chunk_size
- Uninline the gpmi_check_ecc function
- Add strict ecc strength check
- Refactor BCH geometry settings function
* Intel: Fix possible null-ptr-deref in ebu_nand_probe()
* MPC5121: Check before clk_disable_unprepare() not needed
* Mtk:
- MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK
- Also parse the default nand-ecc-engine property if available
- Make mtk_ecc.c a separated module
* OMAP ELM:
- Convert the bindings to yaml
- Describe the bindings for AM64 ELM
- Add support for its compatible
* Renesas: Use runtime PM instead of the raw clock API and update the
bindings accordingly
* Rockchip: Check before clk_disable_unprepare() not needed
* TMIO: Check return value after calling platform_get_resource()
Raw NAND chip driver:
* Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00
SPI-NAND chip drivers:
* Gigadevice:
- Add support for:
- GD5FxGM7xExxG
- GD5F{2,4}GQ5xExxG
- GD5F1GQ5RExxG
- GD5FxGQ4xExxG
- Fix Quad IO for GD5F1GQ5UExxG
* XTX: Add support for XT26G0xA
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
SPI NOR core changes:
- Read back written SR value to make sure the write was done correctly.
- Introduce a common function for Read ID that manufacturer drivers can
use to verify the Octal DTR switch worked correctly.
- Add helpers for read/write any register commands so manufacturer
drivers don't open code it every time.
- Clarify rdsr dummy cycles documentation.
- Add debugfs entry to expose internal flash parameters and state.
SPI NOR manufacturer drivers changes:
- Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A.
- Move spi_nor_write_ear() to Winbond module since only Winbond flashes
use it.
- Rework Micron and Cypress Octal DTR enable methods to improve
readability.
- Use the common Read ID function to verify switch to Octal DTR mode for
Micron and Cypress flashes.
- Skip polling status on volatile register writes for Micron and Cypress
flashes since the operation is instant.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Re-run the shell fragment that generated the original list.
This brings it up to date, so that the next patches that tweak it
further are more clear on what they change.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
For EABI stack unwinding, when loading .ko module
the EXIDX sections will be added to a unwind_table list.
However not all EXIDX sections are added because EXIDX
sections are searched by hardcoded section names.
For functions in other sections such as .ref.text
or .kprobes.text, gcc generates seprated EXIDX sections
(such as .ARM.exidx.ref.text or .ARM.exidx.kprobes.text).
These extra EXIDX sections are not loaded, so when unwinding
functions in these sections, we will failed with:
unwind: Index not found xxx
To fix that, I refactor the code for searching and adding
EXIDX sections:
- Check section type to search EXIDX tables (0x70000001)
instead of strcmp() the hardcoded names. Then find the
corresponding text sections by their section names.
- Add a unwind_table list in module->arch to save their own
unwind_table instead of the fixed-lenth array.
- Save .ARM.exidx.init.text section ptr, because it should
be cleaned after module init.
Now all EXIDX sections of .ko can be added correctly.
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
