summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-07net: dsa: mt7530: detect PHY muxing when PHY is defined on switch MDIO busArınç ÜNAL
Currently, the MT7530 DSA subdriver configures the MT7530 switch to provide direct access to switch PHYs, meaning, the switch PHYs listen on the MDIO bus the switch listens on. The PHY muxing feature makes use of this. This is problematic as the PHY may be attached before the switch is initialised, in which case, the PHY will fail to be attached. Since commit 91374ba537bd ("net: dsa: mt7530: support OF-based registration of switch MDIO bus"), we can describe the switch PHYs on the MDIO bus of the switch on the device tree. Extend the check to detect PHY muxing when the PHY is defined on the MDIO bus of the switch on the device tree. When the PHY is described this way, the switch will be initialised first, then the switch MDIO bus will be registered. Only after these steps, the PHY will be attached. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/20240430-b4-for-netnext-mt7530-use-switch-mdio-bus-for-phy-muxing-v2-1-9104d886d0db@arinc9.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07Merge branch 'rtnetlink-more-rcu-conversions-for-rtnl_fill_ifinfo'Paolo Abeni
Eric Dumazet says: ==================== rtnetlink: more rcu conversions for rtnl_fill_ifinfo() We want to no longer rely on RTNL for "ip link show" command. This is a long road, this series takes care of some parts. ==================== Link: https://lore.kernel.org/r/20240503192059.3884225-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07rtnetlink: allow rtnl_fill_link_netnsid() to run under RCU protectionEric Dumazet
We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. All rtnl_link_ops->get_link_net() methods already using dev_net() are ready. I added READ_ONCE() annotations on others. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07rtnetlink: do not depend on RTNL in rtnl_xdp_prog_skb()Eric Dumazet
dev->xdp_prog is protected by RCU, we can lift RTNL requirement from rtnl_xdp_prog_skb(). Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07rtnetlink: do not depend on RTNL in rtnl_fill_proto_down()Eric Dumazet
Change dev_change_proto_down() and dev_change_proto_down_reason() to write once on dev->proto_down and dev->proto_down_reason. Then rtnl_fill_proto_down() can use READ_ONCE() annotations and run locklessly. rtnl_proto_down_size() should assume worst case, because readng dev->proto_down_reason multiple times would be racy without RTNL in the future. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07rtnetlink: do not depend on RTNL for many attributesEric Dumazet
Following device fields can be read locklessly in rtnl_fill_ifinfo() : type, ifindex, operstate, link_mode, mtu, min_mtu, max_mtu, group, promiscuity, allmulti, num_tx_queues, gso_max_segs, gso_max_size, gro_max_size, gso_ipv4_max_size, gro_ipv4_max_size, tso_max_size, tso_max_segs, num_rx_queues. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: write once on dev->allmulti and dev->promiscuityEric Dumazet
In the following patch we want to read dev->allmulti and dev->promiscuity locklessly from rtnl_fill_ifinfo() In this patch I change __dev_set_promiscuity() and __dev_set_allmulti() to write these fields (and dev->flags) only if they succeed, with WRITE_ONCE() annotations. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07rtnetlink: do not depend on RTNL for IFLA_TXQLEN outputEric Dumazet
rtnl_fill_ifinfo() can read dev->tx_queue_len locklessly, granted we add corresponding READ_ONCE()/WRITE_ONCE() annotations. Add missing READ_ONCE(dev->tx_queue_len) in teql_enqueue() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07rtnetlink: do not depend on RTNL for IFLA_IFNAME outputEric Dumazet
We can use netdev_copy_name() to no longer rely on RTNL to fetch dev->name. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07rtnetlink: do not depend on RTNL for IFLA_QDISC outputEric Dumazet
dev->qdisc can be read using RCU protection. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07Merge branch 'net-qede-don-t-restrict-error-codes'Paolo Abeni
says: ==================== net: qede: don't restrict error codes This series fixes the qede driver, so that when a helper function fails, then the callee should return the returned error code, instead just assuming that the error is eg. -EINVAL. The patches in this series, reduces the change of future bugs, so new error codes can be returned from the helpers, without having to update the call sites. This is a follow-up to my recent series "net: qede: avoid overruling error codes", which fixed the cases where the implicit assumption of failing with specific error codes had been broken. https://lore.kernel.org/netdev/20240426091227.78060-1-ast@fiberby.net/ Asbjørn Sloth Tønnesen (3): net: qede: use return from qede_parse_actions() for flow_spec net: qede: use return from qede_flow_spec_validate_unused() net: qede: use return from qede_flow_parse_ports() .../net/ethernet/qlogic/qede/qede_filter.c | 27 ++++++++++++------- 1 file changed, 18 insertions(+), 9 deletions(-) ==================== Link: https://lore.kernel.org/r/20240503105505.839342-1-ast@fiberby.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: qede: use return from qede_flow_parse_ports()Asbjørn Sloth Tønnesen
When calling qede_flow_parse_ports(), then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_flow_parse_ports() can currently fail with: * -EINVAL This patch changes qede_flow_parse_v{4,6}_common() to use the actual return code from qede_flow_parse_ports(), so it's no longer assumed that all errors are -EINVAL. Only compile tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: qede: use return from qede_flow_spec_validate_unused()Asbjørn Sloth Tønnesen
When calling qede_flow_spec_validate_unused() then the return code was only used for a non-zero check, and then -EOPNOTSUPP was returned. qede_flow_spec_validate_unused() can currently fail with: * -EOPNOTSUPP This patch changes qede_flow_spec_to_rule() to use the actual return code from qede_flow_spec_validate_unused(), so it's no longer assumed that all errors are -EOPNOTSUPP. Only compile tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07net: qede: use return from qede_parse_actions() for flow_specAsbjørn Sloth Tønnesen
In qede_flow_spec_to_rule(), when calling qede_parse_actions() then the return code was only used for a non-zero check, and then -EINVAL was returned. qede_parse_actions() can currently fail with: * -EINVAL * -EOPNOTSUPP Commit 319a1d19471e ("flow_offload: check for basic action hw stats type") broke the implicit assumption that it could only fail with -EINVAL, by changing it to return -EOPNOTSUPP, when hardware stats are requested. However AFAICT it's not possible to trigger qede_parse_actions() to return -EOPNOTSUPP, when called from qede_flow_spec_to_rule(), as hardware stats can't be requested by ethtool_rx_flow_rule_create(). This patch changes qede_flow_spec_to_rule() to use the actual return code from qede_parse_actions(), so it's no longer assumed that all errors are -EINVAL. Only compile tested. Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-07Merge tag 'riscv-config-for-v6.10' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V SoC Kconfig Updates for v6.10 A few different bits of SoC-related Kconfig work. The first part of this is shared with the DT updates - the modification of all SOC_CANAAN users to SOC_CANAAN_K210 to split the existing m-mode nommu k210 away from the k230 that is able to be used in a "common" kernel. The other thing here is the removal of most of the SOC_VENDOR options, with their ARCH_VENDOR equivalents that've been waiting in the wings for 1 year+ now made visible. Due a lapse on my part when originally adding the ARCH_VENDOR stuff, the Microchip transition isn't complete - the _POLARFIRE was a mistake to keep as there's gonna be non-PolarFire RISC-V stuff from Microchip soonTM. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-config-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: config: enable ARCH_CANAAN in defconfig RISC-V: drop SOC_VIRT for ARCH_VIRT RISC-V: drop SOC_SIFIVE for ARCH_SIFIVE RISC-V: drop SOC_MICROCHIP_POLARFIRE for ARCH_MICROCHIP RISC-V: Drop unused SOC_CANAAN reset: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 pinctrl: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 clk: k210: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 soc: canaan: Deprecate SOC_CANAAN and use SOC_CANAAN_K210 for K210 riscv: Kconfig.socs: Split ARCH_CANAAN and SOC_CANAAN_K210 Link: https://lore.kernel.org/r/20240503-mardi-underling-3d81a9f97329@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'amlogic-defconfig-for-v6.10' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/defconfig Amlogic defconfig changes for v6.10: - Enable Khadas TS050 driver as module * tag 'amlogic-defconfig-for-v6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: defconfig: enable Khadas TS050 panel as module Link: https://lore.kernel.org/r/13bf8bc4-1cb7-4b94-8c98-9d1cdae5e1f8@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'mvebu-arm-6.10-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/arm mvebu arm for 6.10 (part 1) Decrease the usage of global GPIO numbers for LEDs for Orion5x boards * tag 'mvebu-arm-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: orion5x: Convert TS409 board to GPIO descriptors for LEDs ARM: orion5x: Convert Net2big board to GPIO descriptors for LEDs ARM: orion5x: Convert MV2120 board to GPIO descriptors for LEDs ARM: orion5x: Convert DNS323 board to GPIO descriptors for LEDs ARM: orion5x: Convert D2Net board to GPIO descriptors for LEDs Link: https://lore.kernel.org/r/87h6fcndxj.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'samsung-dt64-6.10-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.10, part two Few changes exclusively for Google GS101: 1. Add HSI0 and HSI2 clock controllers (CMUs). 2. Add USB 3.1 Dual Role Device (DRD) support. 3. Add UFS (Universal Flash Storage) support. 4. Document bus clocks in pin controllers necessary for accessing registers. * tag 'samsung-dt64-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: gs101: specify empty clocks for remaining pinctrl arm64: dts: exynos: gs101: specify bus clock for pinctrl_hsi2 arm64: dts: exynos: gs101: specify bus clock for pinctrl_peric[01] arm64: dts: exynos: gs101: specify bus clock for pinctrl (far) alive arm64: dts: exynos: gs101: enable ufs, phy on oriole & define ufs regulator arm64: dts: exynos: gs101: Add ufs and ufs-phy dt nodes arm64: dts: exynos: gs101: Add the hsi2 sysreg node dt-bindings: soc: google: exynos-sysreg: add dedicated hsi2 sysreg compatible arm64: dts: exynos: gs101-oriole: enable USB on this board arm64: dts: exynos: gs101: add USB & USB-phy nodes arm64: dts: exynos: gs101: enable cmu-hsi2 clock controller arm64: dts: exynos: gs101: enable cmu-hsi0 clock controller dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit Link: https://lore.kernel.org/r/20240504121233.7589-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07Merge tag 'v6.10-rockchip-dts64-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Radxa Rock 3C board. More gpu+usb enablement on rk3588 boards as well as two new iommus on rk3588. * tag 'v6.10-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add rk3588 pcie and php IOMMUs arm64: dts: rockchip: enable onboard spi flash for rock-3a arm64: dts: rockchip: add USB-C support to rk3588s-orangepi-5 arm64: dts: rockchip: Enable GPU on Orange Pi 5 arm64: dts: rockchip: enable GPU on khadas-edge2 arm64: dts: rockchip: Add USB3 on Edgeble NCM6A-IO board arm64: dts: rockchip: Support poweroff on Edgeble Neural Compute Module arm64: dts: rockchip: Add Radxa ROCK 3C dt-bindings: arm: rockchip: add Radxa ROCK 3C Link: https://lore.kernel.org/r/13810480.dW097sEU6C@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07HID: i2c-hid: Remove unused label in i2c_hid_set_powerKenny Levinsen
This label was left behind when the wake-up logic was moved from i2c_hid_set_power to i2c_hid_probe_address. Clean it up as it causes warnings-as-errors builds to fail. Fixes: bb1033c8a3ea ("HID: i2c-hid: Use address probe to wake on resume") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Kenny Levinsen <kl@kl.wtf> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-05-07printk: cleanup deprecated uses of strncpy/strcpyJustin Stitt
Cleanup some deprecated uses of strncpy() and strcpy() [1]. There doesn't seem to be any bugs with the current code but the readability of this code could benefit from a quick makeover while removing some deprecated stuff as a benefit. The most interesting replacement made in this patch involves concatenating "ttyS" with a digit-led user-supplied string. Instead of doing two distinct string copies with carefully managed offsets and lengths, let's use the more robust and self-explanatory scnprintf(). scnprintf will 1) respect the bounds of @buf, 2) null-terminate @buf, 3) do the concatenation. This allows us to drop the manual NUL-byte assignment. Also, since isdigit() is used about a dozen lines after the open-coded version we'll replace it for uniformity's sake. All the strcpy() --> strscpy() replacements are trivial as the source strings are literals and much smaller than the destination size. No behavioral change here. Use the new 2-argument version of strscpy() introduced in Commit e6584c3964f2f ("string: Allow 2-argument strscpy()"). However, to make this work fully (since the size must be known at compile time), also update the extern-qualified declaration to have the proper size information. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1] Link: https://github.com/KSPP/linux/issues/90 [2] Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [3] Cc: linux-hardening@vger.kernel.org Signed-off-by: Justin Stitt <justinstitt@google.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20240429-strncpy-kernel-printk-printk-c-v1-1-4da7926d7b69@google.com [pmladek@suse.com: Removed obsolete brackets and added empty lines.] Signed-off-by: Petr Mladek <pmladek@suse.com>
2024-05-07Merge tag 'mvebu-dt64-6.10-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.10 (part 1) Few dts fix for dt validation * tag 'mvebu-dt64-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: espressobin-ultra: fix Ethernet Switch unit address arm64: dts: marvell: turris-mox: drop unneeded flash address/size-cells arm64: dts: marvell: eDPU: drop redundant address/size-cells arm64: dts: marvell: cn9130-crb: drop unneeded "status" arm64: dts: marvell: cn9130-crb: drop wrong unit-addresses arm64: dts: marvell: cn9130-db: drop wrong unit-addresses arm64: dts: marvell: cn9131-db: drop unneeded flash address/size-cells arm64: dts: marvell: cn9130-db: drop unneeded flash address/size-cells arm64: dts: marvell: ap80x: fix IOMMU unit address Link: https://lore.kernel.org/r/87jzk8ndyy.fsf@BLaptop.bootlin.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-07gpio: nuvoton: Fix sgpio irq handle errorJim Liu
The generic_handle_domain_irq() function calls irq_resolve_mapping(). Thus delete a duplicative irq_find_mapping() call so that a stack trace and an RCU stall will be avoided. Fixes: c4f8457d17ce ("gpio: nuvoton: Add Nuvoton NPCM sgpio driver") Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240506064244.1645922-1-JJLIU0@nuvoton.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-05-07gpiolib: Discourage to use formatting strings in line namesAndy Shevchenko
Currently the documentation for line names allows to use %u inside the alternative name. This is broken in character device approach from day 1 and being in use solely in sysfs. Character device interface has a line number as a part of its address, so the users better rely on it. Hence remove the misleading documentation. On top of that, there are no in-kernel users (out of 6, if I'm correct) for such names and moreover if one exists it won't help in distinguishing lines with the same naming as '%u' will also be in them and we will get a warning in gpiochip_set_desc_names() for such cases. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Kent Gibson <warthog618@gmail.com> Link: https://lore.kernel.org/r/20240505141420.627398-1-andy.shevchenko@gmail.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-05-07Merge tag 'intel-gpio-v6.10-1' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next intel-gpio for v6.10-1 * New driver for vGPIO controller on Intel Granite Rapids-D * Update ACPI GPIO library to unify the IRQ code path * Better GPIO IRQ line labeling for ACPI * Switched Intel SCH driver to use "mapped" I/O accessors The following is an automated git shortlog grouped by driver: Add Intel Granite Rapids-D vGPIO driver: - Add Intel Granite Rapids-D vGPIO driver crystalcove: - Use -ENOTSUPP consistently gpiolib: - acpi: Set label for IRQ only lines - acpi: Add fwnode name to the GPIO interrupt label - acpi: Pass con_id instead of property into acpi_dev_gpio_irq_get_by() - acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio() - acpi: Simplify error handling in __acpi_find_gpio() - acpi: Extract __acpi_find_gpio() helper - acpi: Check for errors first in acpi_find_gpio() - acpi: Remove never true check in acpi_get_gpiod_by_index() sch: - Utilise temporary variable for struct device - Switch to memory mapped IO accessors wcove: - Use -ENOTSUPP consistently
2024-05-07Merge tag 'qcom-arm64-fixes-for-6.9-2' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes One more Qualcomm Arm64 DeviceTree fix for v6.9 On ths SA8155P automotive platform, the wrong gpio controller is defined for the SD-card detect pin, which depending on probe ordering of things cause ethernet to be broken. The card detect pin reference is corrected to solve this problem. * tag 'qcom-arm64-fixes-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sa8155p-adp: fix SDHC2 CD pin configuration Link: https://lore.kernel.org/r/20240427153817.1430382-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-05-06block: set default max segment size in case of virt_boundaryMing Lei
For devices with virt_boundary limit, the driver may provide zero max segment size, we have to set it as UINT_MAX at default. Otherwise, it may cause warning in driver when handling sglist. Fix it by setting default max segment size as UINT_MAX. Cc: Christoph Hellwig <hch@lst.de> Cc: Mike Snitzer <snitzer@kernel.org> Fixes: b561ea56a264 ("block: allow device to have both virt_boundary_mask and max segment size") Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Closes: https://lore.kernel.org/linux-block/7e38b67c-9372-a42d-41eb-abdce33d3372@linux-m68k.org/ Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20240424134722.2584284-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-06Merge tag 'ipsec-next-2024-05-03' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2024-05-03 1) Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support. This was defined by an early version of an IETF draft that did not make it to a standard. 2) Introduce direction attribute for xfrm states. xfrm states have a direction, a stsate can be used either for input or output packet processing. Add a direction to xfrm states to make it clear for what a xfrm state is used. * tag 'ipsec-next-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Restrict SA direction attribute to specific netlink message types xfrm: Add dir validation to "in" data path lookup xfrm: Add dir validation to "out" data path lookup xfrm: Add Direction to the SA in or out udpencap: Remove Obsolete UDP_ENCAP_ESPINUDP_NON_IKE Support ==================== Link: https://lore.kernel.org/r/20240503082732.2835810-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06mptcp: fix typos in commentsShi-Sheng Yang
This patch fixes the spelling mistakes in comments. The changes were generated using codespell and reviewed manually. eariler -> earlier greceful -> graceful Signed-off-by: Shi-Sheng Yang <fourcolor4c@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240502154740.249839-1-fourcolor4c@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06octeontx2-pf: Treat truncation of IRQ name as an errorSimon Horman
According to GCC, the constriction of irq_name in otx2_open() may, theoretically, be truncated. This patch takes the approach of treating such a situation as an error which it detects by making use of the return value of snprintf, which is the total number of bytes, excluding the trailing '\0', that would have been written. Based on the approach taken to a similar problem in commit 54b909436ede ("rtc: fix snprintf() checking in is_rtc_hctosys()") Flagged by gcc-13 W=1 builds as: .../otx2_pf.c:1933:58: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] 1933 | snprintf(irq_name, NAME_SIZE, "%s-rxtx-%d", pf->netdev->name, | ^ .../otx2_pf.c:1933:17: note: 'snprintf' output between 8 and 33 bytes into a destination of size 32 1933 | snprintf(irq_name, NAME_SIZE, "%s-rxtx-%d", pf->netdev->name, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1934 | qidx); | ~~~~~ Compile tested only. Tested-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240503-octeon2-pf-irq_name-truncation-v2-1-91099177b942@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06netlink: specs: Add missing bridge linkinfo attrsDonald Hunter
Attributes for FDB learned entries were added to the if_link netlink api for bridge linkinfo but are missing from the rt_link.yaml spec. Add the missing attributes to the spec. Fixes: ddd1ad68826d ("net: bridge: Add netlink knobs for number / max learned FDB entries") Signed-off-by: Donald Hunter <donald.hunter@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240503164304.87427-1-donald.hunter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-06Merge patch series "Update lpfc to revision 14.4.0.2"Martin K. Petersen
Justin Tee <justintee8345@gmail.com> says: Update lpfc to revision 14.4.0.2 This patch set contains updates to log messaging, a bug fix related to unloading of the driver, clean up patches regarding the abuse of a global spinlock, and support for 32 byte CDBs. Link: https://lore.kernel.org/r/20240429221547.6842-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Copyright updates for 14.4.0.2 patchesJustin Tee
Update copyrights to 2024 for files modified in the 14.4.0.2 patch set. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-9-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Update lpfc version to 14.4.0.2Justin Tee
Update lpfc version to 14.4.0.2 Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-8-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Add support for 32 byte CDBsJustin Tee
The driver's I/O path is updated to support 32 byte CDBs. Changes to accommodate 32 byte CDBs include: - Updating various size fields to allow for the larger 32 byte CDB. - Starting the FCP command payload at an earlier offset in WQE submission to fit the 32 byte CDB. - Redefining relevant structs to __le32/__be32 data types for proper cpu endianness macro usage. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-7-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Change lpfc_hba hba_flag member into a bitmaskJustin Tee
In attempt to reduce the amount of unnecessary phba->hbalock acquisitions in the lpfc driver, change hba_flag into an unsigned long bitmask and use clear_bit/test_bit bitwise atomic APIs instead of reliance on phba->hbalock for synchronization. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-6-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_listJustin Tee
Instead of using the generic object wide phba->hbalock, an explicit lock should be used to synchronize mutations to the phba->active_rrq_list. Update all accesses to the phba->active_rrq_list with a new phba->rrq_list_lock. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-5-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Clear deferred RSCN processing flag when driver is unloadingJustin Tee
Device recovery logic is skipped when the RSCN processing flag is set. However during rmmod, the flag is not cleared leading to unnecessary delays in waiting for completions on a link that is being offlined. Move clearing of the RSCN deferred flag to a refactored routine when called from device recovery, and set the IA flag when issuing an abort during unload. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-4-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Update logging of protection type for T10 DIF I/OJustin Tee
A struct scsi_cmnd already contains T10 DIF protection type information in prot_type. So, instead of manually checking a CDBs' RD/WRPROTECT fields with (byte[1] >> 5) utilize scsi_get_prot_type(). Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-3-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: lpfc: Change default logging level for unsolicited CT MIB commandsJustin Tee
For diagnostic purposes, it is convenient to automatically log unexpected CT MIB events without the need to set lpfc_log_verbose flags. So, change lpfc_ct_handle_mibreq's logging level from KERN_INFO to KERN_WARNING. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240429221547.6842-2-justintee8345@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06Merge branch '6.9/s/lpfc2' into 6.10/s/lpfcMartin K. Petersen
Pull in bug fix update from 6.9/scsi-fixes to accommodate 14.4.0.2 series. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: target: Remove unused list 'device_list'Dr. David Alan Gilbert
Commit be50f538e9a5 ("target: remove g_device_list") made 'g_device_list' local as 'device_list' but also removed the last use of it, the code that added the device to it. Build tested only. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240503234419.171823-1-linux@treblig.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: iscsi: Remove unused list 'connlist_err'Dr. David Alan Gilbert
I think the last use of this list was removed by commit 23d6fefbb3f6 ("scsi: iscsi: Fix in-kernel conn failure handling"). Build tested only. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Link: https://lore.kernel.org/r/20240503232309.152320-1-linux@treblig.org Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-07ASoC: use 'time_left' instead of 'timeout' withMark Brown
Merge series from Wolfram Sang <wsa+renesas@sang-engineering.com>: There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_*() functions causing patterns like: timeout = wait_for_completion_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code obvious and self explaining. This is part of a tree-wide series. The rest of the patches can be found here (some parts may still be WIP): git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/time_left Because these patches are generated, I audit them before sending. This is why I will send series step by step. Build bot is happy with these patches, though. No functional changes intended.
2024-05-07ASoC: Use snd_soc_substream_to_rtd() for accessingMark Brown
Merge series from Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>: Do not open-code snd_soc_substream_to_rtd() when accessing snd_pcm_substream->private_data. This makes code more consistent with rest of ASoC and allows in the future to move the field to any other place or add additional checks in snd_soc_substream_to_rtd().
2024-05-07ALSA/ASoC: Intel: clarify Copyright informationMark Brown
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset does not change any functionality. It only clarifies the Copyright information in ASoC/HDAudio contributions, where an "All rights reserved" notice was mistakenly added in a number of files over the years, likely due to copy/paste. The Intel template never included this statement.
2024-05-06Merge patch series "ufs-exynos support for Tensor GS101"Martin K. Petersen
Peter Griffin <peter.griffin@linaro.org> says: Hi Martin, James & Alim, This series adds support to the ufs-exynos driver for Tensor gs101 found in Pixel 6. It was send previously in [1] and [2] but included the other clock, phy and DTS parts. This series has been split into just the ufs-exynos part to hopefully make things easier. With this series, plus the phy, clock and dts changes UFS is functional upstream for Pixel 6. The SKhynix HN8T05BZGKX015 can be enumerated, partitions mounted etc. The series is split into some prepatory patches for ufs-exynos and a final patch that adds the gs101 support. Note the sysreg clock has been moved to ufs node as fine grained clock control around the syscon sysreg register accesses doesn't result in functional UFS. regards, Peter Link: https://lore.kernel.org/r/20240426122004.2249178-1-peter.griffin@linaro.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: ufs: exynos: Add support for Tensor gs101 SoCPeter Griffin
Add a dedicated compatible and drv_data with associated hooks for gs101 SoC found on Pixel 6. Note we make use of the previously added EXYNOS_UFS_OPT_UFSPR_SECURE option, to skip initialisation of UFSPR registers as these are only accessible via SMC call. EXYNOS_UFS_OPT_TIMER_TICK_SELECT option is also set to select tick source. This has been done so as not to effect any existing platforms. DBG_OPTION_SUITE on gs101 has different address offsets to other SoCs so these register offsets now come from uic_attr struct. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240426122004.2249178-7-peter.griffin@linaro.org Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdataPeter Griffin
This allows these registers to be at different offsets or not exist at all on some SoCs variants. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240426122004.2249178-6-peter.griffin@linaro.org Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-05-06scsi: ufs: exynos: Allow max frequencies up to 267MhzPeter Griffin
Platforms such as Tensor gs101 the pclk frequency is 267Mhz. Increase PCLK_AVAIL_MAX so we don't fail the frequency check. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Link: https://lore.kernel.org/r/20240426122004.2249178-5-peter.griffin@linaro.org Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Will McVicker <willmcvicker@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-09-15 23:36:23 +0000