| Age | Commit message (Collapse) | Author |
|---|
|
vsc_tp.tx_buf and vsc_tp.rx_buf point to a struct vsc_tp_packet, use
the correct type instead of "void *" and use sizeof(*ptr) when allocating
memory for these buffers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[]
and the vsc-tp.c code is using this in a wrong way. len does not contain
the available size in the buffer, it contains the actual packet length
*without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to
buf[] the fortify-panic handler gets triggered:
[ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0
[ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50
...
[ 80.843175] __fortify_panic+0x9/0xb
[ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw]
[ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110
[ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc]
[ 80.843270] mei_reset+0x11d/0x420 [mei]
The easiest fix would be to just drop the counted-by but with the exception
of the ack buffer in vsc_tp_xfer_helper() which only contains enough room
for the packet-header, all other uses of vsc_tp_packet always use a buffer
of VSC_TP_MAX_XFER_SIZE bytes for the packet.
Instead of just dropping the counted-by, split the vsc_tp_packet struct
definition into a header and a full-packet definition and use a fixed
size buf[] in the packet definition, this way fortify-source buffer
overrun checking still works when enabled.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Cc: stable@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
platform_set_drvdata() is setting a double pointer to struct pps_tio as
driver_data, which will point to the local stack of probe function instead
of intended data. Set driver_data correctly and fix illegal memory access
by its user.
BUG: unable to handle page fault for address: ffffc9000117b738
RIP: 0010:hrtimer_active+0x2b/0x60
Call Trace:
? hrtimer_active+0x2b/0x60
hrtimer_cancel+0x19/0x50
pps_gen_tio_remove+0x1e/0x80 [pps_gen_tio]
Fixes: c89755d1111f ("pps: generators: Add PPS Generator TIO Driver")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250318114038.2058677-1-raag.jadav@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev'
would be released in mcb_device_register() via put_device().
Thus, goto 'err' label and free 'mdev' again causes a double free.
Just return if mcb_device_register() fails.
Fixes: 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus")
Cc: stable <stable@kernel.org>
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/6201d09e2975ae5789879f79a6de4c38de9edd4a.1741596225.git.jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
for_each_present_section_nr() was introduced to add_boot_memory_block()
by commit 61659efdb35c ("drivers/base/memory: improve add_boot_memory_block()").
It causes unnecessary overhead when the present sections are really
sparse. next_present_section_nr() called by the macro to find the next
present section, which is far away from the spanning sections in the
specified block. Too much time consumed by next_present_section_nr()
in this case, which can lead to softlockup as observed by Aditya Gupta
on IBM Power10 machine.
watchdog: BUG: soft lockup - CPU#248 stuck for 22s! [swapper/248:1]
Modules linked in:
CPU: 248 UID: 0 PID: 1 Comm: swapper/248 Not tainted 6.15.0-rc1-next-20250408 #1 VOLUNTARY
Hardware name: 9105-22A POWER10 (raw) 0x800200 opal:v7.1-107-gfda75d121942 PowerNV
NIP: c00000000209218c LR: c000000002092204 CTR: 0000000000000000
REGS: c00040000418fa30 TRAP: 0900 Not tainted (6.15.0-rc1-next-20250408)
MSR: 9000000002009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 28000428 XER: 00000000
CFAR: 0000000000000000 IRQMASK: 0
GPR00: c000000002092204 c00040000418fcd0 c000000001b08100 0000000000000040
GPR04: 0000000000013e00 c000c03ffebabb00 0000000000c03fff c000400fff587f80
GPR08: 0000000000000000 00000000001196f7 0000000000000000 0000000028000428
GPR12: 0000000000000000 c000000002e80000 c00000000001007c 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR28: c000000002df7f70 0000000000013dc0 c0000000011dd898 0000000008000000
NIP [c00000000209218c] memory_dev_init+0x114/0x1e0
LR [c000000002092204] memory_dev_init+0x18c/0x1e0
Call Trace:
[c00040000418fcd0] [c000000002092204] memory_dev_init+0x18c/0x1e0 (unreliable)
[c00040000418fd50] [c000000002091348] driver_init+0x78/0xa4
[c00040000418fd70] [c0000000020063ac] kernel_init_freeable+0x22c/0x370
[c00040000418fde0] [c0000000000100a8] kernel_init+0x34/0x25c
[c00040000418fe50] [c00000000000cd94] ret_from_kernel_user_thread+0x14/0x1c
Avoid the overhead by folding for_each_present_section_nr() to the outer
loop. add_boot_memory_block() is dropped after that.
Fixes: 61659efdb35c ("drivers/base/memory: improve add_boot_memory_block()")
Closes: https://lore.kernel.org/linux-mm/20250409180344.477916-1-adityag@linux.ibm.com
Reported-by: Aditya Gupta <adityag@linux.ibm.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Tested-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20250410125110.1232329-1-gshan@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
count imbalance
syzbot reported a uaf in software_node_notify_remove. [1]
When any of the two sysfs_create_link() in software_node_notify() fails,
the swnode->kobj reference count will not increase normally, which will
cause swnode to be released incorrectly due to the imbalance of kobj reference
count when executing software_node_notify_remove().
Increase the reference count of kobj before creating the link to avoid uaf.
[1]
BUG: KASAN: slab-use-after-free in software_node_notify_remove+0x1bc/0x1c0 drivers/base/swnode.c:1108
Read of size 1 at addr ffff888033c08908 by task syz-executor105/5844
Freed by task 5844:
software_node_notify_remove+0x159/0x1c0 drivers/base/swnode.c:1106
device_platform_notify_remove drivers/base/core.c:2387 [inline]
Fixes: 9eb59204d519 ("iommufd/selftest: Add set_dev_pasid in mock iommu")
Reported-by: syzbot+2ff22910687ee0dfd48e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2ff22910687ee0dfd48e
Tested-by: syzbot+2ff22910687ee0dfd48e@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250414071123.1228331-1-lizhi.xu@windriver.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a note to the fwnode.h that the header should not be used
directly in the leaf drivers, they all should use the higher
level APIs and the respective headers.
The purpose of this note is to give guidance to driver writers
to avoid repeating a common mistake.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250408095229.1298005-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As the one who participated in initial development of auxiliary bus
and later reviewed many of existing auxiliary bus consumers, I would
like to be CCed on all auxiliary bus changes.
Add myself as a reviewer to do not miss new development in that area.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Link: https://lore.kernel.org/r/b60e74e286b1d3935de46092470f716701c924a1.1743510317.git.leon@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the preferred way to use auxiliary bus.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Link: https://lore.kernel.org/r/206e8c249f630abd3661deb36b84b26282241040.1743510317.git.leon@kernel.org
[ reworded the text a bit - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Let users know if incompatible features aren't enabled
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
extent poisoning is partly so that we don't keep spewing the dmesg log
when we've got unreadable data - we don't want to print these.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes to the AMD translation library for the MI300 side of things:
- Use the row[13] bit when calculating the memory row to retire
- Mask the physical row address in order to avoid creating duplicate
error records"
* tag 'edac_urgent_for_v6.15_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/FMPM: Get masked address
RAS/AMD/ATL: Include row[13] bit in row retirement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs fix from Jan Kara:
"Fix a case where isofs could be reading beyond end of the passed
file handle if its type was incorrectly set"
* tag 'fs_for_v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: Prevent the use of too small fid
|
|
If userspace reads "uevent" device attribute at the same time as another
threads unbinds the device from its driver, change to dev->driver from a
valid pointer to NULL may result in crash. Fix this by using READ_ONCE()
when fetching the pointer, and take bus' drivers klist lock to make sure
driver instance will not disappear while we access it.
Use WRITE_ONCE() when setting the driver pointer to ensure there is no
tearing.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-3-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation to closing a race when reading driver pointer in
dev_uevent() code, instead of setting device->driver pointer directly
introduce device_set_driver() helper.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-2-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit c0a40097f0bc81deafc15f9195d1fb54595cd6d0.
Probing a device can take arbitrary long time. In the field we observed
that, for example, probing a bad micro-SD cards in an external USB card
reader (or maybe cards were good but cables were flaky) sometimes takes
longer than 2 minutes due to multiple retries at various levels of the
stack. We can not block uevent_show() method for that long because udev
is reading that attribute very often and that blocks udev and interferes
with booting of the system.
The change that introduced locking was concerned with dev_uevent()
racing with unbinding the driver. However we can handle it without
locking (which will be done in subsequent patch).
There was also claim that synchronization with probe() is needed to
properly load USB drivers, however this is a red herring: the change
adding the lock was introduced in May of last year and USB loading and
probing worked properly for many years before that.
Revert the harmful locking.
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250311052417.1846985-1-dmitry.torokhov@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The original commit message and the wording "uncork" in the code comment
indicate that it is expected that the suppressed event instances are
automatically sent after unsuppressing.
This is not the case, instead they are discarded.
In effect this means that no "changed" events are emitted on the device
itself by default.
While each discovered partition does trigger a changed event on the
device, devices without partitions don't have any event emitted.
This makes udev miss the device creation and prompted workarounds in
userspace. See the linked util-linux/losetup bug.
Explicitly emit the events and drop the confusingly worded comments.
Link: https://github.com/util-linux/util-linux/issues/2434
Fixes: 498ef5c777d9 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v2-1-0c4e6a923b2a@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set cmd->iocb.ki_ioprio to the ioprio of loop device's request.
The purpose is to inherit the original request ioprio in the aio
flow.
Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Under irq_ack, pci1xxxx_assign_bit reads the current interrupt status,
modifies and writes the entire value back. Since, the IRQ status bit
gets cleared on writing back, the better approach is to directly write
the bitmask to the register in order to preserve the value.
Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolve kernel panic while accessing IRQ handler associated with the
generated IRQ. This is done by acquiring the spinlock and storing the
current interrupt state before handling the interrupt request using
generic_handle_irq.
A previous fix patch was submitted where 'generic_handle_irq' was
replaced with 'handle_nested_irq'. However, this change also causes
the kernel panic where after determining which GPIO triggered the
interrupt and attempting to call handle_nested_irq with the mapped
IRQ number, leads to a failure in locating the registered handler.
Fixes: 194f9f94a516 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
register_chrdev will only register the first 256 minors of a major chrdev.
That means that dynamically allocated misc devices with minor above 255
will fail to open with -ENXIO.
This was found by kernel test robot when testing a different change that
makes all dynamically allocated minors be above 255. This has, however,
been separately tested by creating 256 serio_raw devices with the help of
userio driver.
Ever since allowing misc devices with minors above 128, this has been
possible.
Fix it by registering all minor numbers from 0 to MINORMASK + 1 for
MISC_MAJOR.
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/oe-lkp/202503171507.6c8093d0-lkp@intel.com
Fixes: ab760791c0cf ("char: misc: Increase the maximum number of dynamic misc devices to 1048448")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Link: https://lore.kernel.org/r/20250317-misc-chrdev-v1-1-6cd05da11aef@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Panther Lake H device id.
Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250408130005.1358140-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When ngbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent
error paths after ngbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when ngbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 02338c484ab6 ("net: ngbe: Initialize sw info and register netdev")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250412154927.25908-1-abdun.nihaal@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Rename the "data" variable inside msi_wmi_platform_read() to avoid
a name collision when the driver adds support for a state container
struct (that is to be called "data" too) in the future.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250414140453.7691-1-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Extend thermal control support to:
- Alienware Area-51m R2
- Alienware m16 R1
- Alienware m16 R2
- Dell G16 7630
- Dell G5 5505 SE
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-2-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Some users report the Alienware m16 R1 models, support G-Mode. This was
manually verified by inspecting their ACPI tables.
Cc: stable@vger.kernel.org
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250411-awcc-support-v1-1-09a130ec4560@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
It'll likely change how page pools store memory providers, so in
preparation for that, keep accesses in one place in io_uring by
introducing a helper.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3522eb8fa9b4e21bcf32e7e9ae656c616b282210.1744722526.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IORING_OP_RECV_ZC requests take a zcrx object id via sqe::zcrx_ifq_idx,
which binds it to the corresponding if / queue. However, we don't return
that id back to the user. It's fine as currently there can be only one
zcrx and the user assumes that its id should be 0, but as we'll need
multiple zcrx objects in the future let's explicitly pass it back on
registration.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8714667d370651962f7d1a169032e5f02682a73e.1744722517.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When `jr3_pci_detach()` is called during device removal, it calls
`timer_delete_sync()` to stop the timer, but the timer expiry function
always reschedules the timer, so the synchronization is ineffective.
Call `timer_shutdown_sync()` instead. It does not matter that the timer
expiry function pointer is cleared, because the device is being removed.
Fixes: 07b509e6584a5 ("Staging: comedi: add jr3_pci driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250415123901.13483-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The vma start address should be substracted from the buffer's user data
address and not the other way around.
Cc: Tiffany Y. Yang <ynaffit@google.com>
Cc: stable <stable@kernel.org>
Fixes: 162c79731448 ("binder: avoid user addresses in debug logs")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Tiffany Y. Yang <ynaffit@google.com>
Link: https://lore.kernel.org/r/20250325184902.587138-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS.
The register is also accessed from write() callback.
If console were printing and startup()/shutdown() callback
gets called, its access to the register could be overwritten.
Add port->lock to startup()/shutdown() callbacks to make sure
their access to SIFIVE_SERIAL_IE_OFFS is synchronized against
write() callback.
Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
Signed-off-by: Ryo Takakura <ryotkkr98@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Rule: add
Link: https://lore.kernel.org/stable/20250330003522.386632-1-ryotkkr98%40gmail.com
Link: https://lore.kernel.org/r/20250412001847.183221-1-ryotkkr98@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We recently added some locking to this function but this error path
was accidentally missed. Unlock before returning.
Fixes: ec27386de23a ("usb: typec: class: Fix NULL pointer access")
Cc: stable <stable@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/Z_44tOtmml89wQcM@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SanDisk 3.2Gen1 Flash Drive, which VID:PID is in 0781:55a3,
just like Silicon Motion Flash Drive:
https://lore.kernel.org/r/20250401023027.44894-1-limiao870622@163.com
also needs the DELAY_INIT quirk, or it will randomly work incorrectly
(e.g.: lsusb and can't list this device info) when connecting Huawei
hisi platforms and doing thousand of reboot test circles.
Cc: stable <stable@kernel.org>
Signed-off-by: Miao Li <limiao@kylinos.cn>
Signed-off-by: Lei Huang <huanglei@kylinos.cn>
Link: https://lore.kernel.org/r/20250414062935.159024-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core git tree has moved, so properly document it.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/2025041447-showbiz-other-7130@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct page->mapping, index fields are deprecated and soon to be only
available as part of a folio.
It is likely the intel_th code which sets page->mapping, index is was
implemented out of concern that some aspect of the page fault logic may
encounter unexpected problems should they not.
However, the appropriate interface for inserting kernel-allocated memory is
vm_insert_page() in a VM_MIXEDMAP. By using the helper function
vmf_insert_mixed() we can do this with minimal churn in the existing fault
handler.
By doing so, we bypass the remainder of the faulting logic. The pages are
still pinned so there is no possibility of anything unexpected being done
with the pages once established.
It would also be reasonable to pre-map everything on fault, however to
minimise churn we retain the fault handler.
We also eliminate all code which clears page->mapping on teardown as this
has now become unnecessary.
The MSU code relies on faulting to function correctly, so is by definition
dependent on CONFIG_MMU. We avoid spurious reports about compilation
failure for unsupported platforms by making this requirement explicit in
Kconfig as part of this change too.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250331125608.60300-1-lorenzo.stoakes@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
First get the devtype_data then check quirks.
Fixes: bbdffb341498 ("can: rockchip_canfd: add quirk for broken CAN-FD support")
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250324114416.10160-1-o451686892@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Like other protocols on top of AF_CAN family, also j1939_proto.inuse_idx
needs to be decremented on socket dismantle.
Fixes: 6bffe88452db ("can: add protocol counter for AF_CAN sockets")
Reported-by: Oliver Hartkopp <socketcan@hartkopp.net>
Closes: https://lore.kernel.org/linux-can/7e35b13f-bbc4-491e-9081-fb939e1b8df0@hartkopp.net/
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/09ce71f281b9e27d1e3d1104430bf3fceb8c7321.1742292636.git.dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The audit code relies on the fact that kern_path_locked() returned a
path even for a negative dentry. If it doesn't find a valid dentry it
immediately calls:
audit_find_parent(d_backing_inode(parent_path.dentry));
which assumes that parent_path.dentry is still valid. But it isn't since
kern_path_locked() has been changed to path_put() also for a negative
dentry.
Fix this by adding a helper that implements the required audit semantics
and allows us to fix the immediate bleeding. We can find a unified
solution for this afterwards.
Link: https://lore.kernel.org/20250414-rennt-wimmeln-f186c3a780f1@brauner
Fixes: 1c3cb50b58c3 ("VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry")
Reported-and-tested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Both the hfs and hfsplus filesystem have been orphaned since at least
2014, i.e., over 10 years. It's time to remove them from the kernel as
they're exhibiting more and more issues and no one is stepping up to
fixing them.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This odd system call will be removed in the future. Let's decouple it
from CONFIG_EXPERT and switch the default to n as a first step.
Link: https://lore.kernel.org/20250415-dezimieren-wertpapier-9fd18a211a41@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
DSC 12 slices configuration is used for some specific cases with
Ultrajoiner. This can be supported only when each of the 4 joined pipes
have 3 DSC engines each.
Add the missing check for 3 DSC engines support before using 3 DSC
slices per pipe.
Fixes: be7f5fcdf4a0 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414024256.2782702-3-ankit.k.nautiyal@intel.com
(cherry picked from commit da9b1c61e7f7b327dd70c5f073ba04d419a55ef8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
3 DSC engines per pipe is currently supported only for BMG.
Add a macro to check whether a platform supports 3 DSC engines per pipe.
v2:Fix Typo in macro argument. (Suraj).
Added fixes tag.
Bspec: 50175
Fixes: be7f5fcdf4a0 ("drm/i915/dp: Enable 3 DSC engines for 12 slices")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250414085701.2802374-1-ankit.k.nautiyal@intel.com
(cherry picked from commit 6998cfce0e1db58c730d08cadc6bfd71e26e2de0)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Fix niu_try_msix() to not cause a fatal trap on sparc systems.
Set PCI_DEV_FLAGS_MSIX_TOUCH_ENTRY_DATA_FIRST on the struct pci_dev to
work around a bug in the hardware or firmware.
For each vector entry in the msix table, niu chips will cause a fatal
trap if any registers in that entry are read before that entries'
ENTRY_DATA register is written to. Testing indicates writes to other
registers are not sufficient to prevent the fatal trap, however the value
does not appear to matter. This only needs to happen once after power up,
so simply rebooting into a kernel lacking this fix will NOT cause the
trap.
NON-RESUMABLE ERROR: Reporting on cpu 64
NON-RESUMABLE ERROR: TPC [0x00000000005f6900] <msix_prepare_msi_desc+0x90/0xa0>
NON-RESUMABLE ERROR: RAW [4010000000000016:00000e37f93e32ff:0000000202000080:ffffffffffffffff
NON-RESUMABLE ERROR: 0000000800000000:0000000000000000:0000000000000000:0000000000000000]
NON-RESUMABLE ERROR: handle [0x4010000000000016] stick [0x00000e37f93e32ff]
NON-RESUMABLE ERROR: type [precise nonresumable]
NON-RESUMABLE ERROR: attrs [0x02000080] < ASI sp-faulted priv >
NON-RESUMABLE ERROR: raddr [0xffffffffffffffff]
NON-RESUMABLE ERROR: insn effective address [0x000000c50020000c]
NON-RESUMABLE ERROR: size [0x8]
NON-RESUMABLE ERROR: asi [0x00]
CPU: 64 UID: 0 PID: 745 Comm: kworker/64:1 Not tainted 6.11.5 #63
Workqueue: events work_for_cpu_fn
TSTATE: 0000000011001602 TPC: 00000000005f6900 TNPC: 00000000005f6904 Y: 00000000 Not tainted
TPC: <msix_prepare_msi_desc+0x90/0xa0>
g0: 00000000000002e9 g1: 000000000000000c g2: 000000c50020000c g3: 0000000000000100
g4: ffff8000470307c0 g5: ffff800fec5be000 g6: ffff800047a08000 g7: 0000000000000000
o0: ffff800014feb000 o1: ffff800047a0b620 o2: 0000000000000011 o3: ffff800047a0b620
o4: 0000000000000080 o5: 0000000000000011 sp: ffff800047a0ad51 ret_pc: 00000000005f7128
RPC: <__pci_enable_msix_range+0x3cc/0x460>
l0: 000000000000000d l1: 000000000000c01f l2: ffff800014feb0a8 l3: 0000000000000020
l4: 000000000000c000 l5: 0000000000000001 l6: 0000000020000000 l7: ffff800047a0b734
i0: ffff800014feb000 i1: ffff800047a0b730 i2: 0000000000000001 i3: 000000000000000d
i4: 0000000000000000 i5: 0000000000000000 i6: ffff800047a0ae81 i7: 00000000101888b0
I7: <niu_try_msix.constprop.0+0xc0/0x130 [niu]>
Call Trace:
[<00000000101888b0>] niu_try_msix.constprop.0+0xc0/0x130 [niu]
[<000000001018f840>] niu_get_invariants+0x183c/0x207c [niu]
[<00000000101902fc>] niu_pci_init_one+0x27c/0x2fc [niu]
[<00000000005ef3e4>] local_pci_probe+0x28/0x74
[<0000000000469240>] work_for_cpu_fn+0x8/0x1c
[<000000000046b008>] process_scheduled_works+0x144/0x210
[<000000000046b518>] worker_thread+0x13c/0x1c0
[<00000000004710e0>] kthread+0xb8/0xc8
[<00000000004060c8>] ret_from_fork+0x1c/0x2c
[<0000000000000000>] 0x0
Kernel panic - not syncing: Non-resumable error.
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-3-dullfire@yahoo.com
|
|
Commit 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") introduced a
readl() from ENTRY_VECTOR_CTRL before the writel() to ENTRY_DATA.
This is correct, however some hardware, like the Sun Neptune chips, the NIU
module, will cause an error and/or fatal trap if any MSIX table entry is
read before the corresponding ENTRY_DATA field is written to.
Add an optional early writel() in msix_prepare_msi_desc().
Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries")
Signed-off-by: Jonathan Currier <dullfire@yahoo.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241117234843.19236-2-dullfire@yahoo.com
|
|
Commit 3d45a3d0d2e6 ("powerpc: Define config option for processors with broadcast TLBIE")
added a config option PPC_RADIX_BROADCAST_TLBIE to support processors with
broadcast TLBIE. Since this option is relevant only for RADIX_MMU, add
a check as a dependency to enable PPC_RADIX_BROADCAST_TLBIE in both
powernv and pseries configs. This fixes the unmet config dependency
warning reported
WARNING: unmet direct dependencies detected for PPC_RADIX_BROADCAST_TLBIE
Depends on [n]: PPC_RADIX_MMU [=n]
Selected by [y]:
- PPC_PSERIES [=y] && PPC64 [=y] && PPC_BOOK3S [=y]
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504051857.jRqxM60c-lkp@intel.com/
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250407084029.357710-1-maddy@linux.ibm.com
|
|
get_stubs_size assumes that there must always be at least one patchable
function entry, which is not always the case (modules that export data
but no code), otherwise it returns -ENOEXEC and thus the section header
sh_size is set to that value. During module_memory_alloc() the size is
passed to execmem_alloc() after being page-aligned and thus set to zero
which will cause it to fail the allocation (and thus module loading) as
__vmalloc_node_range() checks for zero-sized allocs and returns null:
[ 115.466896] module_64: cast_common: doesn't contain __patchable_function_entries.
[ 115.469189] ------------[ cut here ]------------
[ 115.469496] WARNING: CPU: 0 PID: 274 at mm/vmalloc.c:3778 __vmalloc_node_range_noprof+0x8b4/0x8f0
...
[ 115.478574] ---[ end trace 0000000000000000 ]---
[ 115.479545] execmem: unable to allocate memory
Fix this by removing the check completely, since it is anyway not
helpful to propagate this as an error upwards.
Fixes: eec37961a56a ("powerpc64/ftrace: Move ftrace sequence out of line")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Acked-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250204231821.39140-1-ailiop@suse.com
|
|
A vmemmap altmap is a device-provided region used to provide
backing storage for struct pages. For each namespace, the altmap
should belong to that same namespace. If the namespaces are
created unaligned, there is a chance that the section vmemmap
start address could also be unaligned. If the section vmemmap
start address is unaligned, the altmap page allocated from the
current namespace might be used by the previous namespace also.
During the free operation, since the altmap is shared between two
namespaces, the previous namespace may detect that the page does
not belong to its altmap and incorrectly assume that the page is a
normal page. It then attempts to free the normal page, which leads
to a kernel crash.
Kernel attempted to read user page (18) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000018
Faulting instruction address: 0xc000000000530c7c
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 32 PID: 2104 Comm: ndctl Kdump: loaded Tainted: G W
NIP: c000000000530c7c LR: c000000000530e00 CTR: 0000000000007ffe
REGS: c000000015e57040 TRAP: 0300 Tainted: G W
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 84482404
CFAR: c000000000530dfc DAR: 0000000000000018 DSISR: 40000000 IRQMASK: 0
GPR00: c000000000530e00 c000000015e572e0 c000000002c5cb00 c00c000101008040
GPR04: 0000000000000000 0000000000000007 0000000000000001 000000000000001f
GPR08: 0000000000000005 0000000000000000 0000000000000018 0000000000002000
GPR12: c0000000001d2fb0 c0000060de6b0080 0000000000000000 c0000060dbf90020
GPR16: c00c000101008000 0000000000000001 0000000000000000 c000000125b20f00
GPR20: 0000000000000001 0000000000000000 ffffffffffffffff c00c000101007fff
GPR24: 0000000000000001 0000000000000000 0000000000000000 0000000000000000
GPR28: 0000000004040201 0000000000000001 0000000000000000 c00c000101008040
NIP [c000000000530c7c] get_pfnblock_flags_mask+0x7c/0xd0
LR [c000000000530e00] free_unref_page_prepare+0x130/0x4f0
Call Trace:
free_unref_page+0x50/0x1e0
free_reserved_page+0x40/0x68
free_vmemmap_pages+0x98/0xe0
remove_pte_table+0x164/0x1e8
remove_pmd_table+0x204/0x2c8
remove_pud_table+0x1c4/0x288
remove_pagetable+0x1c8/0x310
vmemmap_free+0x24/0x50
section_deactivate+0x28c/0x2a0
__remove_pages+0x84/0x110
arch_remove_memory+0x38/0x60
memunmap_pages+0x18c/0x3d0
devm_action_release+0x30/0x50
release_nodes+0x68/0x140
devres_release_group+0x100/0x190
dax_pmem_compat_release+0x44/0x80 [dax_pmem_compat]
device_for_each_child+0x8c/0x100
[dax_pmem_compat_remove+0x2c/0x50 [dax_pmem_compat]
nvdimm_bus_remove+0x78/0x140 [libnvdimm]
device_remove+0x70/0xd0
Another issue is that if there is no altmap, a PMD-sized vmemmap
page will be allocated from RAM, regardless of the alignment of
the section start address. If the section start address is not
aligned to the PMD size, a VM_BUG_ON will be triggered when
setting the PMD-sized page to page table.
In this patch, we are aligning the section vmemmap start address
to PAGE_SIZE. After alignment, the start address will not be
part of the current namespace, and a normal page will be allocated
for the vmemmap mapping of the current section. For the remaining
sections, altmaps will be allocated. During the free operation,
the normal page will be correctly freed.
In the same way, a PMD_SIZE vmemmap page will be allocated only if
the section start address is PMD_SIZE-aligned; otherwise, it will
fall back to a PAGE-sized vmemmap allocation.
Without this patch
==================
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------
| Altmap| Altmap | .....|Altmap| Altmap | ...........
| NS1 | NS1 | | NS2 | NS2 |
In the above scenario, NS1 and NS2 are two namespaces. The vmemmap
for NS1 comes from Altmap NS1, which belongs to NS1, and the
vmemmap for NS2 comes from Altmap NS2, which belongs to NS2.
The vmemmap start for NS2 is not aligned, so Altmap NS2 is shared
by both NS1 and NS2. During the free operation in NS1, Altmap NS2
is not part of NS1's altmap, causing it to attempt to free an
invalid page.
With this patch
===============
NS1 start NS2 start
_________________________________________________________
| NS1 | NS2 |
---------------------------------------------------------
| Altmap| Altmap | .....| Normal | Altmap | Altmap |.......
| NS1 | NS1 | | Page | NS2 | NS2 |
If the vmemmap start for NS2 is not aligned then we are allocating
a normal page. NS1 and NS2 vmemmap will be freed correctly.
Fixes: 368a0590d954 ("powerpc/book3s64/vmemmap: switch radix to use a different vmemmap handling function")
Co-developed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8f98ec2b442977c618f7256cec88eb17dde3f2b9.1741609795.git.donettom@linux.ibm.com
|
|
Fix compile errors when CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=n
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8231763344223c193e3452eab0ae8ea966aff466.1741609795.git.donettom@linux.ibm.com
|
|
The user can set any value for 'deadtime'. This affects the arithmetic
expression 'req->deadtime * SMB_ECHO_INTERVAL', which is subject to
overflow. The added check makes the server behavior more predictable.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
