summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-08-01xfs: refactor log recovery checkDarrick J. Wong
Add a predicate to decide if the log is actively in recovery and use that instead of open-coding a pagf_init check in the attr leaf verifier. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2018-08-01spi: spi-gpio: add SPI_3WIRE supportLorenzo Bianconi
Add SPI_3WIRE support to spi-gpio controller introducing set_line_direction function pointer in spi_bitbang data structure. Spi-gpio controller has been tested using hts221 temp/rh iio sensor running in 3wire mode and lsm6dsm running in 4wire mode Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01spi: add flags parameter to txrx_word function pointersLorenzo Bianconi
Add the capability to specify the flag parameter used in bitbang_txrx_be_cpha{0,1} through the txrx_word function pointers of spi_bitbang data structure. That feature will be used to add spi-3wire support to the spi-gpio controller Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01powerpc/64s/radix: Fix missing global invalidations when removing coproFrederic Barrat
With the optimizations for TLB invalidation from commit 0cef77c7798a ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask"), the scope of a TLBI (global vs. local) can now be influenced by the value of the 'copros' counter of the memory context. When calling mm_context_remove_copro(), the 'copros' counter is decremented first before flushing. It may have the unintended side effect of sending local TLBIs when we explicitly need global invalidations in this case. Thus breaking any nMMU user in a bad and unpredictable way. Fix it by flushing first, before updating the 'copros' counter, so that invalidations will be global. Fixes: 0cef77c7798a ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask") Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-01spi: add SPI controller driver for UniPhier SoCKeiji Hayashibara
Add SPI controller driver implemented in Socionext UniPhier SoCs. UniPhier SoCs have two types SPI controllers; SCSSI supports a single channel, and MCSSI supports multiple channels. This driver supports SCSSI only. This controller has 32bit TX/RX FIFO with depth of eight entry, and supports the SPI master mode only. This commit is implemented in PIO transfer mode, not DMA transfer. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01gpiolib-acpi: make sure we trigger edge events at least once on bootBenjamin Tissoires
On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-01spi: add DT bindings for UniPhier SPI controllerKunihiko Hayashi
Add DT bindings for SPI controller implemented in UniPhier SoCs. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-01Merge branch 'pm-tools'Rafael J. Wysocki
Merge turbostat utility fixes for final 4.18: - Fix the -S option on 1-CPU systems. - Fix computations using incorrect processor core counts. - Fix the x2apic debug message. - Fix logical node enumeration to allow for non-sequential physical nodes. - Fix reported family on modern AMD processors. - Clarify the RAPL column information in the man page. * pm-tools: tools/power turbostat: version 18.07.27 tools/power turbostat: Read extended processor family from CPUID tools/power turbostat: Fix logical node enumeration to allow for non-sequential physical nodes tools/power turbostat: fix x2apic debug message output file tools/power turbostat: fix bogus summary values tools/power turbostat: fix -S on UP systems tools/power turbostat: Update turbostat(8) RAPL throttling column description
2018-08-01MAINTAINERS: drop Wenyou Yang from Atmel NAND driver supportMiquel Raynal
Mails to wenyou.yang@microchip.com are not deliverable. Drop him as Microchip/Atmel NAND controller driver maintainer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-08-01mtd: rawnand: allocate dynamically ONFI parameters during detectionMiquel Raynal
Now that it is possible to do dynamic allocations during the identification phase, convert the onfi_params structure (which is only needed with ONFI compliant chips) into a pointer that will be allocated only if needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: only apply reset hacks to broken hardwareBrian Norris
Commit 59b356ffd0b0 ("mtd: m25p80: restore the status of SPI flash when exiting") is the latest from a long history of attempts to add reboot handling to handle stateful addressing modes on SPI flash. Some prior mostly-related discussions: http://lists.infradead.org/pipermail/linux-mtd/2013-March/046343.html [PATCH 1/3] mtd: m25p80: utilize dedicated 4-byte addressing commands http://lists.infradead.org/pipermail/barebox/2014-September/020682.html [RFC] MTD m25p80 3-byte addressing and boot problem http://lists.infradead.org/pipermail/linux-mtd/2015-February/057683.html [PATCH 2/2] m25p80: if supported put chip to deep power down if not used Previously, attempts to add reboot-time software reset handling were rejected, but the latest attempt was not. Quick summary of the problem: Some systems (e.g., boot ROM or bootloader) assume that they can read initial boot code from their SPI flash using 3-byte addressing. If the flash is left in 4-byte mode after reset, these systems won't boot. The above patch provided a shutdown/remove hook to attempt to reset the addressing mode before we reboot. Notably, this patch misses out on huge classes of unexpected reboots (e.g., crashes, watchdog resets). Unfortunately, it is essentially impossible to solve this problem 100%: if your system doesn't know how to reset the SPI flash to power-on defaults at initialization time, no amount of software can really rescue you -- there will always be a chance of some unexpected reset that leaves your flash in an addressing mode that your boot sequence didn't expect. While it is not directly harmful to perform hacks like the aforementioned commit on all 4-byte addressing flash, a properly-designed system should not need the hack -- and in fact, providing this hack may mask the fact that a given system is indeed broken. So this patch attempts to apply this unsound hack more narrowly, providing a strong suggestion to developers and system designers that this is truly a hack. With luck, system designers can catch their errors early on in their development cycle, rather than applying this hack long term. But apparently enough systems are out in the wild that we still have to provide this hack. Document a new device tree property to denote systems that do not have a proper hardware (or software) reset mechanism, and apply the hack (with a loud warning) only in this case. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: cadence-quadspi: fix timeout handlingNicholas Mc Guire
wait_for_completion_timeout returns an unsigned long not an int, so let's check its return value directly instead of storing it in ret, and avoid checking for negative values since this cannot happen. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.hBoris Brezillon
GPIO consumers now include <linux/gpio/consumer.h> instead of <linux/gpio.h> if they can. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: intel-spi: use mtd_device_register()Rafał Miłecki
This driver doesn't specify parsers so it can use that little helper. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK"Benjamin Gaignard
The format specifier "%p" can leak kernel addresses. Use "%pK" instead. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01mtd: spi-nor: atmel-quadspi: add suspend/resume hooksClaudiu Beznea
Implement suspend/resume hooks. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-01s390/numa: move initial setup of node_to_cpumask_mapMartin Schwidefsky
The numa_init_early initcall sets the node_to_cpumask_map[0] to the full cpu_possible_mask. Unfortunately this early_initcall is too late, the NUMA setup for numa=emu is done even earlier. The order of calls is numa_setup() -> emu_update_cpu_topology(), then the early_initcalls(), followed by sched_init_domains(). Starting with git commit 051f3ca02e46432c0965e8948f00c07d8a2f09c0 "sched/topology: Introduce NUMA identity node sched domain" the incorrect node_to_cpumask_map[0] really screws up the domain setup and the kernel panics with the follow oops: Cc: <stable@vger.kernel.org> # v4.15+ Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-08-01Merge tag 'drm-misc-fixes-2018-07-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes pull request for v4.18-rc7: - Small fixes to drm_atomic_helper_async_check(). (bbrezillon) - Fix error handling in drm_legacy_addctx(). (Nicholas) - Handle register reset on hotplug in adv7511. (seanpaul) Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/90e0e966-bce5-15a4-286a-eda908788b03@linux.intel.com
2018-07-31enic: do not call enic_change_mtu in enic_probeGovindarajulu Varadarajan
In commit ab123fe071c9 ("enic: handle mtu change for vf properly") ASSERT_RTNL() is added to _enic_change_mtu() to prevent it from being called without rtnl held. enic_probe() calls enic_change_mtu() without rtnl held. At this point netdev is not registered yet. Remove call to enic_change_mtu and assign the mtu to netdev->mtu. Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31ipv4: frags: handle possible skb truesize changeEric Dumazet
ip_frag_queue() might call pskb_pull() on one skb that is already in the fragment queue. We need to take care of possible truesize change, or we might have an imbalance of the netns frags memory usage. IPv6 is immune to this bug, because RFC5722, Section 4, amended by Errata ID 3089 states : When reassembling an IPv6 datagram, if one or more its constituent fragments is determined to be an overlapping fragment, the entire datagram (and any constituent fragments) MUST be silently discarded. Fixes: 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31inet: frag: enforce memory limits earlierEric Dumazet
We currently check current frags memory usage only when a new frag queue is created. This allows attackers to first consume the memory budget (default : 4 MB) creating thousands of frag queues, then sending tiny skbs to exceed high_thresh limit by 2 to 3 order of magnitude. Note that before commit 648700f76b03 ("inet: frags: use rhashtables for reassembly units"), work queue could be starved under DOS, getting no cpu cycles. After commit 648700f76b03, only the per frag queue timer can eventually remove an incomplete frag queue and its skbs. Fixes: b13d3cbfb8e8 ("inet: frag: move eviction of queues to work queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jann Horn <jannh@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Oskolkov <posk@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31Merge tag 'mlx5-fixes-2018-07-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-07-31 The following series includes four mlx5 fixes. Please pull and let me know if there's any problem. For -stable v4.14 net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager For -stable v4.16 net/mlx5e: Set port trust mode to PCP as default For -stable v4.17 net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flow ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31xfs: move extent busy tree initialization to xfs_initialize_peragDarrick J. Wong
Move the per-AG busy extent tree initialization to the per-ag structure initialization since we don't want online repair to leak the old tree. We only deconstruct the tree at unmount time, so this should be safe. This also enables us to eliminate the commented out initialization in the xfsprogs libxfs. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-31xfs: avoid COW fork extent lookups in writeback if the fork didn't changeChristoph Hellwig
Used the per-fork sequence counter to avoid lookups in the writeback code unless the COW fork actually changed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-31xfs: maintain a sequence count for inode fork manipulationsChristoph Hellwig
Add a simple 32-bit unsigned integer as the sequence count for modifications to the extent list in the inode fork. This will be used to optimize away extent list lookups in the writeback code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-07-31xfs: check for unknown v5 feature bits in superblock write verifierDarrick J. Wong
Make sure we never try to write the superblock with unknown feature bits set. We checked those at mount time, so if they're set now then memory is corrupt. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2018-07-31xfs: verify icount in superblock writeDarrick J. Wong
Add a helper predicate to check the inode count for sanity, then use it in the superblock write verifier to inspect sb_icount. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2018-07-31libxfs: add more bounds checking to sb sanity checksBill O'Donnell
Current sb verifier doesn't check bounds on sb_fdblocks and sb_ifree. Add sanity checks for these parameters. Signed-off-by: Bill O'Donnell <billodo@redhat.com> [darrick: port to refactored sb validation predicates] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2018-07-31xfs: refactor superblock verifiersDarrick J. Wong
Split the superblock verifier into the common checks, the read-time checks, and the write-time check functions. No functional changes, but we're setting up to add more write-only checks. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2018-07-31xfs: refactor the xrep_extent_list into xfs_bitmapDarrick J. Wong
As mentioned previously, the xrep_extent_list basically implements a bitmap with two functions: set and disjoint union. Rename all these functions to xfs_bitmap to shorten the name and make it more obvious what we're doing. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-07-31Merge tag 'audit-pr-20180731' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "A single small audit fix to guard against memory allocation failures when logging information about a kernel module load. It's small, easy to understand, and self-contained; while nothing is zero risk, this should be pretty low" * tag 'audit-pr-20180731' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix potential null dereference 'context->module.name'
2018-07-31nohz: Fix local_timer_softirq_pending()Anna-Maria Gleixner
local_timer_softirq_pending() checks whether the timer softirq is pending with: local_softirq_pending() & TIMER_SOFTIRQ. This is wrong because TIMER_SOFTIRQ is the softirq number and not a bitmask. So the test checks for the wrong bit. Use BIT(TIMER_SOFTIRQ) instead. Fixes: 5d62c183f9e9 ("nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()") Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Cc: bigeasy@linutronix.de Cc: peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180731161358.29472-1-anna-maria@linutronix.de
2018-07-31net/mlx5e: IPoIB, Set the netdevice sw mtu in ipoib enhanced flowFeras Daoud
After introduction of the cited commit, mlx5e_build_nic_params receives the netdevice mtu in order to set the sw_mtu of mlx5e_params. For enhanced IPoIB, the netdevice mtu is not set in this stage, therefore, the initial sw_mtu equals zero. As a result, the hw_mtu of the receive queue will be calculated incorrectly causing traffic issues. To fix this issue, query for port mtu before building the nic params. Fixes: 472a1e44b349 ("net/mlx5e: Save MTU in channels params") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-31net/mlx5e: Fix null pointer access when setting MTU of vport representorAdi Nissim
MTU helper function is used by both conventional mlx5e instances (PF/VF) and the eswitch representors. The representor shouldn't change the nic vport context MTU, the VF is responsible for that. Therefore set_mtu_cb has a null value when changing the representor MTU. Fixes: 250a42b6a764 ("net/mlx5e: Support configurable MTU for vport representors") Signed-off-by: Adi Nissim <adin@mellanox.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-31net/mlx5e: Set port trust mode to PCP as defaultOr Gerlitz
The hairpin offload code has dependency on the trust mode being PCP. Hence we should set PCP as the default for handling cases where we are disallowed to read the trust mode from the FW, or failed to initialize it. Fixes: 106be53b6b0a ('net/mlx5e: Set per priority hairpin pairs') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-31net/mlx5e: E-Switch, Initialize eswitch only if eswitch managerEli Cohen
Execute mlx5_eswitch_init() only if we have MLX5_ESWITCH_MANAGER capabilities. Do the same for mlx5_eswitch_cleanup(). Fixes: a9f7705ffd66 ("net/mlx5: Unify vport manager capability check") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-31net: dsa: mv88e6xxx: Fix SERDES support on 88E6141/6341Andrew Lunn
Version 1 of the patch adding SERDES support to the 88E6141/6341 correctly added the ops to the 88E6141/6341. However, by the time version 3 was committed, the ops had moved to the 88E6085/6175. Put them back where they belong. Fixes: 5bafeb6e7e87 ("net: dsa: mv88e6xxx: 88E6141/6341 SERDES support") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31mips: dts: mscc: enable spi and NOR flash support on ocelot PCB123Alexandre Belloni
Ocelot PCB123 has a SPI NOR connected on its SPI bus. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20103/ Cc: Mark Brown <broonie@kernel.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-spi@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Allan Nielsen <allan.nielsen@microsemi.com>
2018-07-31mips: dts: mscc: Add spi on OcelotAlexandre Belloni
Add support for the SPI controller Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/20101/ Cc: Mark Brown <broonie@kernel.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-spi@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Allan Nielsen <allan.nielsen@microsemi.com>
2018-07-31Merge tag 'wireless-drivers-for-davem-2018-07-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.18 Last set of fixes before 4.18 is released iwlwifi * add new IDs for cards already available on the market brcmfmac * fix a regression introduced in v4.17 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-31Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Nine fixes, five in the qla2xxx driver, the most serious of which is the uninitialized list head crash which can be observed in most systems under a sufficiently loaded low memory environment. The two sg fixes are minor but obvious and two target ones which seem reasonable but not high impact" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Return error when TMF returns scsi: qla2xxx: Fix ISP recovery on unload scsi: qla2xxx: Fix driver unload by shutting down chip scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion scsi: qla2xxx: Fix unintialized List head crash scsi: sg: update comment for blk_get_request() scsi: sg: fix minor memory leak in error path scsi: libiscsi: fix possible NULL pointer dereference in case of TMF scsi: target: iscsi: cxgbit: fix max iso npdu calculation
2018-07-31Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Some bugfixes that seem important and safe enough to merge at the last minute" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix another race between migration and ballooning tools/virtio: add kmalloc_array stub tools/virtio: add dma barrier stubs
2018-07-31Merge tag 'acpi-urgent-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix a recent ACPICA regression affecting control method execution at the table level and an earlier hibernation regression in the ACPI driver for Intel SoCs (LPSS) that was missed by a previous fix in this cycle. Specifics: - Fix a recent ACPICA regression introduced by a previous fix that caused control method execution at the table level to be mishandled by mistake (Erik Schmauss). - Fix a hibernation regression from the 4.15 cycle in the ACPI driver for Intel SoCs (LPSS) that caused the platform firmware to be confused during resume from hibernation by the driver's PM quirks which was fixed for system-wide suspend/resume (ACPI S3) earlier in this cycle, but that previous fix missed the hibernation (ACPI S4) case (Rafael Wysocki)" * tag 'acpi-urgent-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: AML Parser: ignore control method status in module-level code ACPI / LPSS: Avoid PM quirks on suspend and resume from hibernation
2018-07-31PCI: Fix is_added/is_busmaster race conditionHari Vyas
When a PCI device is detected, pdev->is_added is set to 1 and proc and sysfs entries are created. When the device is removed, pdev->is_added is checked for one and then device is detached with clearing of proc and sys entries and at end, pdev->is_added is set to 0. is_added and is_busmaster are bit fields in pci_dev structure sharing same memory location. A strange issue was observed with multiple removal and rescan of a PCIe NVMe device using sysfs commands where is_added flag was observed as zero instead of one while removing device and proc,sys entries are not cleared. This causes issue in later device addition with warning message "proc_dir_entry" already registered. Debugging revealed a race condition between the PCI core setting the is_added bit in pci_bus_add_device() and the NVMe driver reset work-queue setting the is_busmaster bit in pci_set_master(). As these fields are not handled atomically, that clears the is_added bit. Move the is_added bit to a separate private flag variable and use atomic functions to set and retrieve the device addition state. This avoids the race because is_added no longer shares a memory location with is_busmaster. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200283 Signed-off-by: Hari Vyas <hari.vyas@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31s390/kdump: Fix elfcorehdr size calculationPhilipp Rudo
Before the memory for the elfcorehdr is allocated the required size is estimated with alloc_size = 0x1000 + get_cpu_cnt() * 0x4a0 + mem_chunk_cnt * sizeof(Elf64_Phdr); Where 0x4a0 is used as size for the ELF notes to store the register contend. This size is 8 bytes too small. Usually this does not immediately cause a problem because the page reserved for overhead (Elf_Ehdr, vmcoreinfo, etc.) is pretty generous. So usually there is enough spare memory to counter the mis-calculated per cpu size. However, with growing overhead and/or a huge cpu count the allocated size gets too small for the elfcorehdr. Ultimately a BUG_ON is triggered causing the crash kernel to panic. Fix this by properly calculating the required size instead of relying on magic numbers. Fixes: a62bc07392539 ("s390/kdump: add support for vector extension") Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-07-31t10-pi: provide empty t10_pi_complete() for !CONFIG_BLK_DEV_INTEGRITYJens Axboe
Fixes a link failure whtn BLK_DEV_INTEGRITY isn't defined. Fixes: 10c41ddd6132 ("block: move dif_prepare/dif_complete functions to block layer") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-31perf bpf: Show better message when failing to load an objectArnaldo Carvalho de Melo
Before: libbpf: license of tools/perf/examples/bpf/etcsnoop.c is GPL libbpf: section(6) version, size 4, link 0, flags 3, type=1 libbpf: kernel version of tools/perf/examples/bpf/etcsnoop.c is 41200 libbpf: section(7) .symtab, size 120, link 1, flags 0, type=2 bpf: config program 'syscalls:sys_enter_openat' libbpf: load bpf program failed: Operation not permitted libbpf: failed to load program 'syscalls:sys_enter_openat' libbpf: failed to load object 'tools/perf/examples/bpf/etcsnoop.c' bpf: load objects failed After: (just the last line changes) bpf: load objects failed: err=-4009: (Incorrect kernel version) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wi44iid0yjfht3lcvplc75fm@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-31spi: dw: document Microsemi integrationAlexandre Belloni
The integration of the Designware SPI controller on Microsemi SoCs requires an extra register set to be able to give the IP control of the SPI interface. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-31perf list: Unify metric group description format with PMU event descriptionMichael Petlan
PMU event descriptions use 7 spaces + '[' or 8 spaces as indentation. Metric groups used a tab + '['. This patch unifies it to the way PMU event descriptions are indented. BEFORE: $ perf list [...] Metric Groups: DSB: DSB_Coverage [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)] [...] AFTER: $ perf list [...] Metric Groups: DSB: DSB_Coverage [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)] [...] Signed-off-by: Michael Petlan <mpetlan@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> LPU-Reference: 771439042.22924766.1532986504631.JavaMail.zimbra@redhat.com Link: https://lkml.kernel.org/n/tip-mlo850517m6u1rbjndvd1bwr@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-31perf vendor events arm64: Update ThunderX2 implementation defined pmu core ↵Ganapatrao Kulkarni
events Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ganapatrao Kulkarni <gklkml16@gmail.com> Cc: Jan Glauber <jan.glauber@cavium.com> Cc: Jayachandran C <jnair@caviumnetworks.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@cavium.com> Cc: Vadim Lomovtsev <vadim.lomovtsev@cavium.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180731100251.23575-1-ganapatrao.kulkarni@cavium.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-10-01 23:04:55 +0000