| Age | Commit message (Collapse) | Author |
|---|
|
When the driver is used for concurrent mode, both virtual interfaces can
be set to station or AP mode, though only one can be in AP mode at the
same time.
In order to keep the code simple, use only hw port 0 for AP mode. When
an interface is added in AP mode which would be assigned to port 1, use
a switch_port function to transparently swap the mapping between virtual
interface and hw port.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-21-martin.kaistra@linutronix.de
|
|
Add a custom function for allocating entries in the sec cam. This allows
us to store multiple keys with the same keyidx.
The maximum number of sec cam entries for 8188f is 16 according to the
vendor driver. Add the number to rtl8xxxu_fileops, so that other chips
which might support more entries, can set a different number there.
Set the bssid as mac address for group keys instead of just using the
ethernet broadcast address and use BIT(6) in the sec cam ctrl entry
for differentiating them from pairwise keys like in the vendor driver.
Add the TXDESC_EN_DESC_ID bit and the hw_key_idx to tx
broadcast/multicast packets in AP mode.
Finally, allow the usage of rtl8xxxu_set_key() for AP mode.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-20-martin.kaistra@linutronix.de
|
|
Now that all uses of priv->vif have been converted to priv->vifs[]
remove the old attribute.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-19-martin.kaistra@linutronix.de
|
|
Until now, the driver only assigned a dedicated macid for connections
made in AP mode, in STA mode the return value of rtl8xxxu_get_macid()
was simply 0.
To differentiate between port 0 and 1, when both are in STA mode,
allocate a second macid (with value 1) and set sta_info->macid according
to the used port_num in rtl8xxxu_sta_add().
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-18-martin.kaistra@linutronix.de
|
|
Call set_bssid() with the correct port_num now.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-17-martin.kaistra@linutronix.de
|
|
Call set_linktype and set_bssid now with correct port_num. Call
stop_tx_beacon only for port 0, as we don't support beacons on port 1.
Explicit changes to BEACON will only happen for AP type interfaces, so
we don't need an additional check there.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-16-martin.kaistra@linutronix.de
|
|
Add a custom struct to store in vif->drv_priv with a reference to
port_num and fill it when a new interface is added. Choose a free
port_num for the newly added interface.
As we only want to support AP mode/sending beacons on port 0, only change
the beacon settings if a new interface is actually assigned to port 0.
Call set_linktype() and set_mac() with the appropriate port_num.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-15-martin.kaistra@linutronix.de
|
|
Check first whether priv->vifs[0] exists and is of type STATION, then go
to priv->vifs[1]. Make sure to call refresh_rate_mask for both
interfaces.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-14-martin.kaistra@linutronix.de
|
|
As we only want to support AP mode/sending beacons on port 0, change
from priv->vif to priv->vifs[0] in the check for AP mode.
Additionally, if we are in AP mode, don't filter RX beacon and probe
response frames to still allow working STATION mode on the other
interface.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-13-martin.kaistra@linutronix.de
|
|
As we only want to support AP mode/sending beacons on port 0, it is
enough to replace priv->vif with priv->vifs[0].
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-12-martin.kaistra@linutronix.de
|
|
In concurrent mode supported by this driver, both interfaces will use
the same channel and same wireless mode.
It is therefore possible to get the wireless mode by checking the first
connected interface.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-11-martin.kaistra@linutronix.de
|
|
To prepare for concurrent mode, enhance rtl8xxxu_set_bssid() to write the
BSSID of the respective interface to REG_BSSID or REG_BSSID1.
Like done with rtl8xxxu_set_mac(), call rtl8xxxu_set_bssid() with
port_num = 0, until the callers also support multiple interfaces.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-10-martin.kaistra@linutronix.de
|
|
If both interfaces are in STATION mode and both are connected to an AP,
there might be conflicting CFO values for the two connections. Ignore
the CFO information in this case.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-9-martin.kaistra@linutronix.de
|
|
The driver will support two interfaces soon, which both can be in
station mode, so extend the check, whether cfo information should be
parsed, to cover both interfaces.
For better code readability put the lines with priv->vifs[port_num] in a
separate function.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-8-martin.kaistra@linutronix.de
|
|
There are multiple places in the code where the current connection
status of wifi is checked. The driver will support two interfaces soon
and either one of them (or both) could be connected.
Convert all uses of (vif && vif->cfg.assoc) to a new helper
function rtl8xxxu_is_assoc() which checks both interfaces.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-7-martin.kaistra@linutronix.de
|
|
To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the
mac address of the respective interface to REG_MACID or REG_MACID1.
Remove the call to rtl8xxxu_set_mac() from the init function as we set
it in rtl8xxxu_add_interface() later anyway.
Until rtl8xxxu_add_interface() can handle both interfaces, call
rtl8xxxu_set_mac() with port_num = 0.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-6-martin.kaistra@linutronix.de
|
|
The driver currently does not support AP or concurrent mode for 8188e,
so just use priv->vifs[0] instead of priv->vif for now.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-5-martin.kaistra@linutronix.de
|
|
To prepare for concurrent mode, enhance the set_linktype function to be
able to set the linktype in the MSR register for both hardware ports.
Until the users of set_linktype can handle multiple interfaces, use
port_num = 0.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-4-martin.kaistra@linutronix.de
|
|
To prepare for concurrent mode, add an array ("vifs") to rtl8xxxu_priv
to keep track of both interfaces.
Keep the old priv->vif as long there are still users of it and let
priv->vifs[0] point to the same location.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-3-martin.kaistra@linutronix.de
|
|
priv->vif gets already set in rtl8xxxu_add_interface, there is no need
to set it also in rtl8xxxu_bss_info_changed().
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-2-martin.kaistra@linutronix.de
|
|
Refine the power parameters for better step response especially at high
current ramp case that is caused by power inductor variation.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240103070155.119488-1-pkshih@realtek.com
|
|
There are two spelling mistakes in rtw89_err error messages. Fix these
and also add space between [ERR] and message text.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231220141831.10063-1-colin.i.king@gmail.com
|
|
The channel_info is hardware settings to reflect operational status, such
as scale factor, report unit, buffer matrix size, RU size and so on. Then,
we can get desired reports to do further tuning.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064440.36926-1-pkshih@realtek.com
|
|
TX power is controlled by BB layer basically, but it should interact with
MAC layer, so these registers are put on MAC register domain and called
BB wrapper, which contains TX power for each MAC ID, OFDMA RU power, and
consideration of power type table.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064433.36870-1-pkshih@realtek.com
|
|
NCTL standing for nano-controller is used to assist RF calibration.
Basically, we write settings from a table, but format of the table can't
describe register mask and additional conditions, so add a function to
set this kind of settings.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064422.36812-1-pkshih@realtek.com
|
|
BB parameter file is a list of tuple {addr, val} with conditional hardware
version. However, tuples within a condition can't be empty, so insert a
special dummy tuple for this case. Then, ignore this tuple when writing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064407.36750-1-pkshih@realtek.com
|
|
DIG standing for dynamic initial gain that is used to adjust RX coverage,
and PD lower threshold is packet detection power level by received signal
strength to avoid false detection of the WiFi packet.
Because of the hardware is different between WiFi 7 and 6 ICs, we adjust
flow and add register definition for 8922A.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064228.36580-5-pkshih@realtek.com
|
|
Set values of LNA, TIA and RPL gain compensation read from firmware file
when channel is changed.
Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064228.36580-4-pkshih@realtek.com
|
|
Add RX gain offset dynamic setting flow according to different bands
and bandwidths. RX gain offset values will be different according to
different channel bands, therefore, this dynamic mechanism is needed
while channel is changed. Add this to parse data from the element of
firmware file, and then we can use them easier at runtime.
Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064228.36580-3-pkshih@realtek.com
|
|
WiFi 7 chips use different bb_gain_info struct, so move existing struct to
a union in advance. This doesn't change logic at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105064228.36580-2-pkshih@realtek.com
|
|
Update TX power tables to RF version R37. Mainly update configurations for
Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240103014114.9558-2-pkshih@realtek.com
|
|
Update TX power tables to RF version R36. Mainly update configurations for
Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240103014114.9558-1-pkshih@realtek.com
|
|
Sometimes driver can't use kernel API pci_read/write_config_byte
to access the PCI config space of above address 0x100 due to
the negotiated PCI setting. 8852AE/8852BE/8851BE provide another
way called DBI function, which belongs to WiFi mac and could
access all PCI config space for this case.
Link: https://lore.kernel.org/linux-wireless/79fe81b7db7148b9a7da2353c16d70fb@realtek.com/T/#t
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240103012346.6822-1-pkshih@realtek.com
|
|
A second dereference is needed to get the accurate size of the
relocation_hashtable.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: d8792a5734b0 ("riscv: Safely remove entries from relocation list")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202312120044.wTI1Uyaa-lkp@intel.com/
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240104-module_loading_fix-v3-3-a71f8de6ce0f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
When there is not enough allocatable memory for the relocation
hashtable, module loading should exit gracefully. Previously, this was
attempted to be accomplished by checking if an unsigned number is less
than zero which does not work. Instead have the caller check if the
hashtable was correctly allocated and add a comment explaining that
hashtable_bits that is 0 is valid.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: d8792a5734b0 ("riscv: Safely remove entries from relocation list")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202312132019.iYGTwW0L-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202312120044.wTI1Uyaa-lkp@intel.com/
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240104-module_loading_fix-v3-2-a71f8de6ce0f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Reverse order of kfree calls to resolve use-after-free error.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Fixes: d8792a5734b0 ("riscv: Safely remove entries from relocation list")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202312132019.iYGTwW0L-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202312120044.wTI1Uyaa-lkp@intel.com/
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240104-module_loading_fix-v3-1-a71f8de6ce0f@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Fix two typos in the admin-guide:
- a missing e in "reference_perf" in cppc_sysfs.rst.
- the amd_pstate sysfs path uses a dash instead of an underscore.
Signed-off-by: Erwan Velu <e.velu@criteo.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On some Meteor Lake platforms, maximum one core turbo frequency is not
observed. During hybrid performance to frequency conversion, the maximum
frequency is 100 MHz less. This results in requesting maximum frequency
100 MHz less.
For example when the max one core turbo is 4.9 GHz:
MSR HWP_CAPABILITIES shows highest performance ratio for P-core is 0x3E.
With the current scaling factor of 78741 (1.27x for converting frequency
to performance) results in max frequency of 4.8 GHz. This results in
capping the max scaling frequency as 4.8 GHz, which is 100 MHz less than
the desired.
Add capability to define per CPU model specific scaling factor and define
scaling factor of 80000 (1.25x for converting frequency to performance for
P-cores) for Meteor Lake.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Debug message adjustment, subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the extra 'mt8195-afe-pcm-dai' component, register the DAI
drivers to the main AFE component, and rework the DAI linking between
the headset codec (RT5682/RT5682S) and the TDM interface in the probe
function to stop assigning name, relying on the of_node of the codec.
Also replace the COMP_DUMMY codec entry with a COMP_EMPTY for the
ETDM2_IN and remove it entirely from ETDM1_OUT to fix the registration
flow for this sound card.
While at it, since we also need to swap the codec init function from
ETDM2_IN to ETDM1_OUT, remove the static assignment of both `ops` and
`init` for both, as we now assign these dynamically during probe.
Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240110105757.539089-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Make erofs_err() and erofs_info() support NULL sb parameter for more
general usage.
Suggested-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Chunhai Guo <guochunhai@vivo.com>
Link: https://lore.kernel.org/r/20240103123202.3054718-1-guochunhai@vivo.com
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Syzbot reported a KMSAN warning,
erofs: (device loop0): z_erofs_lz4_decompress_mem: failed to decompress -12 in[46, 4050] out[917]
=====================================================
BUG: KMSAN: uninit-value in hex_dump_to_buffer+0xae9/0x10f0 lib/hexdump.c:194
..
print_hex_dump+0x13d/0x3e0 lib/hexdump.c:276
z_erofs_lz4_decompress_mem fs/erofs/decompressor.c:252 [inline]
z_erofs_lz4_decompress+0x257e/0x2a70 fs/erofs/decompressor.c:311
z_erofs_decompress_pcluster fs/erofs/zdata.c:1290 [inline]
z_erofs_decompress_queue+0x338c/0x6460 fs/erofs/zdata.c:1372
z_erofs_runqueue+0x36cd/0x3830
z_erofs_read_folio+0x435/0x810 fs/erofs/zdata.c:1843
The root cause is that the printed decompressed buffer may be filled
incompletely due to decompression failure. Since they were once only
used for debugging, get rid of them now.
Reported-and-tested-by: syzbot+6c746eea496f34b3161d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/000000000000321c24060d7cfa1c@google.com
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20231227151903.2900413-1-hsiangkao@linux.alibaba.com
|
|
Use debian/<package> for tmpdir, which is the default of debhelper.
This simplifies the code.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
Strictly speaking, 'make headers' should be a part of build-arch
instead of binary-arch.
'make headers' constructs ready-to-copy UAPI headers in the kernel
directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
The ti_am335x_tscadc is specific to some TI SoCs, update
the dependencies for those SoCs and compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20231220155643.445849-1-pbrobinson@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add bindings for Unisoc UMS9620 system global registers which provide
register maps for clocks.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231215085630.984892-2-chunyan.zhang@unisoc.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The sysctrl driver was looking for an instance of the PM2301
charger but this has been deleted from the kernel and is not
used with the U8500 systems any more. Drop the string.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231214-ab8500-sysctrl-oneliner-v1-1-fd78a15c0b2f@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
i915_perf_types.h:341: warning: Excess struct member 'ptr_lock' description in 'i915_perf_stream'
i915_perf_types.h:341: warning: Excess struct member 'head' description in 'i915_perf_stream'
i915_perf_types.h:341: warning: Excess struct member 'tail' description in 'i915_perf_stream'
3 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-4-rdunlap@infradead.org
(cherry picked from commit aa253baca534357e033bd29b074ce1eade2a9362)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'num_guc_ids' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_bitmap' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_id_list' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'guc_ids_in_use' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_contexts' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'destroyed_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_worker' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'reset_fail_mask' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_delay_ms' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'sched_disable_gucid_threshold' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'lock' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'gt_stamp' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'ping_delay' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'work' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'shift' description in 'intel_guc'
intel_guc.h:305: warning: Excess struct member 'last_stat_jiffies' description in 'intel_guc'
18 warnings as Errors
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-3-rdunlap@infradead.org
(cherry picked from commit e4cf1a70fad3e2107503e99cfe9cc0c9cba19dad)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
intel_gsc.h:34: warning: Excess struct member 'gem_obj' description in 'intel_gsc'
Also add missing field member descriptions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231228234946.12405-1-rdunlap@infradead.org
(cherry picked from commit cd1d91115ff1929ec346d85f512ef260ddf8131e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Document nested struct members with full names as described in
Documentation/doc-guide/kernel-doc.rst.
i915_gem_context_types.h:420: warning: Excess struct member 'lock' description in 'i915_gem_context'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231226195432.10891-1-rdunlap@infradead.org
(cherry picked from commit 7353c3d7c15017140a8b984e41f94be0bf535e73)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
