| Age | Commit message (Collapse) | Author |
|---|
|
Ping-Ke Shih says:
==================
rtw-next patches for v6.17
Regular development, refinement and minor fixes. Some notable changes are:
rtw88:
* enable AP/ad-hoc modes for SDIO devices
rtw89:
* implement BT-coexistence for WiFi MLO
* ongoing to develop STA+P2P MCC
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This patch set adds all the supported FLEXCOMs for the SAMA7D65 SoC.
This also adds the GMAC interfaces and enables GMAC0 interface for
the SAMA7D65 SoC.
With the FLEXCOMs added to the SoC the MCP16502 and the MAC address
EEPROM are both added to flexcom10.
The dt-binding for USART is here [1]. And the dt-binding for DMA has
been applied here [2].
The original thread for this is here [3]. The applied changes have been
removed for this resend
[1] https://lore.kernel.org/20250306160318.vhPzJLjl19Vq9am9RRbuv5ddmQ6GCEND-YNvPKKtAtU@z
[2] https://lore.kernel.org/174065806827.367410.5368210992879330466.b4-ty@kernel.org
[3] https://lore.kernel.org/392b078b38d15f6adf88771113043044f31e8cd6.1743523114.git.Ryan.Wanner@microchip.com
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/35808b7cee5ba5b2ce55d741ae1ada0f1cd2f7cb.1750694691.git.Ryan.Wanner@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We encountered following crash when testing a XDP_REDIRECT feature
in production:
[56251.579676] list_add corruption. next->prev should be prev (ffff93120dd40f30), but was ffffb301ef3a6740. (next=ffff93120dd
40f30).
[56251.601413] ------------[ cut here ]------------
[56251.611357] kernel BUG at lib/list_debug.c:29!
[56251.621082] Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[56251.632073] CPU: 111 UID: 0 PID: 0 Comm: swapper/111 Kdump: loaded Tainted: P O 6.12.33-cloudflare-2025.6.
3 #1
[56251.653155] Tainted: [P]=PROPRIETARY_MODULE, [O]=OOT_MODULE
[56251.663877] Hardware name: MiTAC GC68B-B8032-G11P6-GPU/S8032GM-HE-CFR, BIOS V7.020.B10-sig 01/22/2025
[56251.682626] RIP: 0010:__list_add_valid_or_report+0x4b/0xa0
[56251.693203] Code: 0e 48 c7 c7 68 e7 d9 97 e8 42 16 fe ff 0f 0b 48 8b 52 08 48 39 c2 74 14 48 89 f1 48 c7 c7 90 e7 d9 97 48
89 c6 e8 25 16 fe ff <0f> 0b 4c 8b 02 49 39 f0 74 14 48 89 d1 48 c7 c7 e8 e7 d9 97 4c 89
[56251.725811] RSP: 0018:ffff93120dd40b80 EFLAGS: 00010246
[56251.736094] RAX: 0000000000000075 RBX: ffffb301e6bba9d8 RCX: 0000000000000000
[56251.748260] RDX: 0000000000000000 RSI: ffff9149afda0b80 RDI: ffff9149afda0b80
[56251.760349] RBP: ffff9131e49c8000 R08: 0000000000000000 R09: ffff93120dd40a18
[56251.772382] R10: ffff9159cf2ce1a8 R11: 0000000000000003 R12: ffff911a80850000
[56251.784364] R13: ffff93120fbc7000 R14: 0000000000000010 R15: ffff9139e7510e40
[56251.796278] FS: 0000000000000000(0000) GS:ffff9149afd80000(0000) knlGS:0000000000000000
[56251.809133] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[56251.819561] CR2: 00007f5e85e6f300 CR3: 00000038b85e2006 CR4: 0000000000770ef0
[56251.831365] PKRU: 55555554
[56251.838653] Call Trace:
[56251.845560] <IRQ>
[56251.851943] cpu_map_enqueue.cold+0x5/0xa
[56251.860243] xdp_do_redirect+0x2d9/0x480
[56251.868388] bnxt_rx_xdp+0x1d8/0x4c0 [bnxt_en]
[56251.877028] bnxt_rx_pkt+0x5f7/0x19b0 [bnxt_en]
[56251.885665] ? cpu_max_write+0x1e/0x100
[56251.893510] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.902276] __bnxt_poll_work+0x190/0x340 [bnxt_en]
[56251.911058] bnxt_poll+0xab/0x1b0 [bnxt_en]
[56251.919041] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.927568] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.935958] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.944250] __napi_poll+0x2b/0x160
[56251.951155] bpf_trampoline_6442548651+0x79/0x123
[56251.959262] __napi_poll+0x5/0x160
[56251.966037] net_rx_action+0x3d2/0x880
[56251.973133] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.981265] ? srso_alias_return_thunk+0x5/0xfbef5
[56251.989262] ? __hrtimer_run_queues+0x162/0x2a0
[56251.996967] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.004875] ? srso_alias_return_thunk+0x5/0xfbef5
[56252.012673] ? bnxt_msix+0x62/0x70 [bnxt_en]
[56252.019903] handle_softirqs+0xcf/0x270
[56252.026650] irq_exit_rcu+0x67/0x90
[56252.032933] common_interrupt+0x85/0xa0
[56252.039498] </IRQ>
[56252.044246] <TASK>
[56252.048935] asm_common_interrupt+0x26/0x40
[56252.055727] RIP: 0010:cpuidle_enter_state+0xb8/0x420
[56252.063305] Code: dc 01 00 00 e8 f9 79 3b ff e8 64 f7 ff ff 49 89 c5 0f 1f 44 00 00 31 ff e8 a5 32 3a ff 45 84 ff 0f 85 ae
01 00 00 fb 45 85 f6 <0f> 88 88 01 00 00 48 8b 04 24 49 63 ce 4c 89 ea 48 6b f1 68 48 29
[56252.088911] RSP: 0018:ffff93120c97fe98 EFLAGS: 00000202
[56252.096912] RAX: ffff9149afd80000 RBX: ffff9141d3a72800 RCX: 0000000000000000
[56252.106844] RDX: 00003329176c6b98 RSI: ffffffe36db3fdc7 RDI: 0000000000000000
[56252.116733] RBP: 0000000000000002 R08: 0000000000000002 R09: 000000000000004e
[56252.126652] R10: ffff9149afdb30c4 R11: 071c71c71c71c71c R12: ffffffff985ff860
[56252.136637] R13: 00003329176c6b98 R14: 0000000000000002 R15: 0000000000000000
[56252.146667] ? cpuidle_enter_state+0xab/0x420
[56252.153909] cpuidle_enter+0x2d/0x40
[56252.160360] do_idle+0x176/0x1c0
[56252.166456] cpu_startup_entry+0x29/0x30
[56252.173248] start_secondary+0xf7/0x100
[56252.179941] common_startup_64+0x13e/0x141
[56252.186886] </TASK>
From the crash dump, we found that the cpu_map_flush_list inside
redirect info is partially corrupted: its list_head->next points to
itself, but list_head->prev points to a valid list of unflushed bq
entries.
This turned out to be a result of missed XDP flush on redirect lists. By
digging in the actual source code, we found that
commit 7f0a168b0441 ("bnxt_en: Add completion ring pointer in TX and RX
ring structures") incorrectly overwrites the event mask for XDP_REDIRECT
in bnxt_rx_xdp. We can stably reproduce this crash by returning XDP_TX
and XDP_REDIRECT randomly for incoming packets in a naive XDP program.
Properly propagate the XDP_REDIRECT events back fixes the crash.
Fixes: a7559bc8c17c ("bnxt: support transmit and free of aggregation buffers")
Tested-by: Andrew Rzeznik <arzeznik@cloudflare.com>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://patch.msgid.link/aFl7jpCNzscumuN2@debian.debian
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch avoids another update of the consumer at the end of
dpaa2_xsk_tx().
In the zero copy xmit path, two versions (batched and non-batched)
regarding how the consumer of tx ring changes are implemented in
xsk_tx_peek_release_desc_batch() that eventually updates the local
consumer to the global consumer in either of the following call trace:
1) batched mode:
xsk_tx_peek_release_desc_batch()
__xskq_cons_release()
2) non-batched mode:
xsk_tx_peek_release_desc_batch()
xsk_tx_peek_release_fallback()
xsk_tx_release()
As we can see, dpaa2_xsk_tx() doesn't need to call extra release function
to handle the sync of consumer itself.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250623120159.68374-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux patch to fix a problem seen by the dracut-ng
folks during early boot when SELinux is enabled, but the policy has
yet to be loaded"
* tag 'selinux-pr-20250624' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: change security_compute_sid to return the ssid or tsid on match
|
|
If a userspace application just include <linux/vm_sockets.h> will fail
to build with the following errors:
/usr/include/linux/vm_sockets.h:182:39: error: invalid application of ‘sizeof’ to incomplete type ‘struct sockaddr’
182 | unsigned char svm_zero[sizeof(struct sockaddr) -
| ^~~~~~
/usr/include/linux/vm_sockets.h:183:39: error: ‘sa_family_t’ undeclared here (not in a function)
183 | sizeof(sa_family_t) -
|
Include <sys/socket.h> for userspace (guarded by ifndef __KERNEL__)
where `struct sockaddr` and `sa_family_t` are defined.
We already do something similar in <linux/mptcp.h> and <linux/if.h>.
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250623100053.40979-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jijie Shao says:
====================
There are some cleanup for hns3 driver
v3: https://lore.kernel.org/20250621083310.52c8e7ae@kernel.org
v2: https://lore.kernel.org/20250617010255.1183069-1-shaojijie@huawei.com
v1: https://lore.kernel.org/20250612021317.1487943-1-shaojijie@huawei.com
====================
Link: https://patch.msgid.link/20250623040043.857782-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
signedness
A static alarm exists in the hns and needs to be cleared.
The alarm is comparison of integer expressions of different
signedness including 's64' and 'long unsigned int',
'int' and 'long unsigned int', 'u32' and 'int',
'int' and 'unsigned int'.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20250623040043.857782-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add complete parentheses for some macros to fix static check
warning.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250623040043.857782-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Address before the array is redundant, this patch delete it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250623040043.857782-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To make the print message more clearly, add \n at the and of message if
it is missing currently.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250623040043.857782-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
conversion
There are too many indirection layers in the HNS3 driver code,
This issue was previously discussed with the maintainer,
who suggested adding a helper function to fix the issue.
In fact, the hns3_get_ops() helper is already defined
and can fix this issue.
This patch uses hns3_get_ops() helper to reduce the unnecessary
middle layer conversion. Apply it to the whole HNS3 driver.
The former discusstion can be checked from the link.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230310081404.947-1-lanhao@huawei.com/
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250623040043.857782-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
layer conversion
There are too many indirection layers in the HNS3 driver code.
This issue was previously discussed with the maintainer,
who suggested adding a helper function to fix the issue.
In fact, the hns3_get_ae_dev() helper is already defined
and can fix this issue.
This patch uses hns3_get_ae_dev() helper to reduce the unnecessary
middle layer conversion. Apply it to the whole HNS3 driver.
The former discusstion can be checked from the link.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230310081404.947-1-lanhao@huawei.com/
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250623040043.857782-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are spelling mistakes in hclgevf_get_regs. Fix them.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250623040043.857782-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Align with ip_rcv() by dropping PACKET_OTHERHOST packets before
calling skb_share_check(). This avoids unnecessary skb processing
for packets that will be discarded anyway.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250623033431.408810-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While configuring a vxlan tunnel in a system with a i40e NIC driver, I
observe the following deadlock:
WARNING: possible recursive locking detected
6.16.0-rc2.net-next-6.16_92d87230d899+ #13 Tainted: G E
--------------------------------------------
kworker/u256:4/1125 is trying to acquire lock:
ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: i40e_udp_tunnel_set_port (/home/pabeni/net-next/include/net/udp_tunnel.h:343 /home/pabeni/net-next/drivers/net/ethernet/intel/i40e/i40e_main.c:13013) i40e
but task is already holding lock:
ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:739) udp_tunnel
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&utn->lock);
lock(&utn->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u256:4/1125:
#0: ffff8892910ca158 ((wq_completion)udp_tunnel_nic){+.+.}-{0:0}, at: process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3213)
#1: ffffc900244efd30 ((work_completion)(&utn->work)){+.+.}-{0:0}, at: process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3214)
#2: ffffffff9a14e290 (rtnl_mutex){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:737) udp_tunnel
#3: ffff88921ab9c8c8 (&utn->lock){+.+.}-{4:4}, at: udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:739) udp_tunnel
stack backtrace:
Hardware name: Dell Inc. PowerEdge R7525/0YHMCJ, BIOS 2.2.5 04/08/2021
i
Call Trace:
<TASK>
dump_stack_lvl (/home/pabeni/net-next/lib/dump_stack.c:123)
print_deadlock_bug (/home/pabeni/net-next/kernel/locking/lockdep.c:3047)
validate_chain (/home/pabeni/net-next/kernel/locking/lockdep.c:3901)
__lock_acquire (/home/pabeni/net-next/kernel/locking/lockdep.c:5240)
lock_acquire.part.0 (/home/pabeni/net-next/kernel/locking/lockdep.c:473 /home/pabeni/net-next/kernel/locking/lockdep.c:5873)
__mutex_lock (/home/pabeni/net-next/kernel/locking/mutex.c:604 /home/pabeni/net-next/kernel/locking/mutex.c:747)
i40e_udp_tunnel_set_port (/home/pabeni/net-next/include/net/udp_tunnel.h:343 /home/pabeni/net-next/drivers/net/ethernet/intel/i40e/i40e_main.c:13013) i40e
udp_tunnel_nic_device_sync_by_port (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:230 /home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:249) udp_tunnel
__udp_tunnel_nic_device_sync.part.0 (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:292) udp_tunnel
udp_tunnel_nic_device_sync_work (/home/pabeni/net-next/net/ipv4/udp_tunnel_nic.c:742) udp_tunnel
process_one_work (/home/pabeni/net-next/kernel/workqueue.c:3243)
worker_thread (/home/pabeni/net-next/kernel/workqueue.c:3315 /home/pabeni/net-next/kernel/workqueue.c:3402)
kthread (/home/pabeni/net-next/kernel/kthread.c:464)
AFAICS all the existing callsites of udp_tunnel_nic_set_port_priv() are
already under the utn lock scope, avoid (re-)acquiring it in such a
function.
Fixes: 1ead7501094c ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/95a827621ec78c12d1564ec3209e549774f9657d.1750675978.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Having PM put sync in remove function is causing PM underflow during
remove operation. This is caused by the function, runtime_pm_get_sync,
not being called anywhere during the op. Ensure that calls to
pm_runtime_enable()/pm_runtime_disable() and
pm_runtime_get_sync()/pm_runtime_put_sync() match.
echo 108d2000.spi > /sys/bus/platform/drivers/cadence-qspi/unbind
[ 49.644256] Deleting MTD partitions on "108d2000.spi.0":
[ 49.649575] Deleting u-boot MTD partition
[ 49.684087] Deleting root MTD partition
[ 49.724188] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
Continuous bind/unbind will result in an "Unbalanced pm_runtime_enable" error.
Subsequent unbind attempts will return a "No such device" error, while bind
attempts will return a "Resource temporarily unavailable" error.
[ 47.592434] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 49.592233] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 53.232309] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 55.828550] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 57.940627] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 59.912490] cadence-qspi 108d2000.spi: detected FIFO depth (1024) different from config (128)
[ 61.876243] cadence-qspi 108d2000.spi: Runtime PM usage count underflow!
[ 61.883000] platform 108d2000.spi: Unbalanced pm_runtime_enable!
[ 532.012270] cadence-qspi 108d2000.spi: probe with driver cadence-qspi failed1
Also, change clk_disable_unprepare() to clk_disable() since continuous
bind and unbind operations will trigger a warning indicating that the clock is
already unprepared.
Fixes: 4892b374c9b7 ("mtd: spi-nor: cadence-quadspi: Add runtime PM support")
cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Link: https://patch.msgid.link/4e7a4b8aba300e629b45a04f90bddf665fbdb335.1749601877.git.khairul.anuar.romli@altera.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v6.17
All ath drivers:
Add "#include <linux/export.h>" to all files that use EXPORT_SYMBOL()
to fix a newly introduced 'make W=1' check. Note that check has
subsequently been changed to only test when W=2, but keep the fixes to
suppress the warning for 'make W=2'.
ath12k:
Properly handle scan requests on multi-radio wiphy devices.
Perform the usual set of bug fixes and cleanups.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Once want_mount_setattr() has returned a positive, it does require
finish_mount_kattr() to release ->mnt_userns. Failing do_mount_setattr()
does not change that.
As the result, we can end up leaking userns and possibly mnt_idmap as
well.
Fixes: c4a16820d901 ("fs: add open_tree_attr()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Allow an S1G station to use aggregation.
Signed-off-by: Sophronia Koilpillai <sophronia.koilpillai@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-5-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When a station configuration is updated, update the stations
S1G capabilities.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-4-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for updating the stations S1G capabilities when
an S1G association occurs.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-3-lachlan.hodges@morsemicro.com
[remove unused S1G_CAP3_MAX_MPDU_LEN_3895/_7791]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently there is no support for initialising a peers S1G capabilities,
this patch adds support for configuring an S1G station.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support to get the radio for which RTS threshold needs to be changed
from userspace. Pass on this radio index to underlying drivers as an
additional argument.
A value of -1 indicates radio index is not mentioned and that the
configuration applies to all radio(s) of the wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-5-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In case of multi-radio wiphys, with per-radio RTS threshold brought
into use, RTS threshold for each radio in a wiphy can be recorded in
wiphy parameter - wiphy_radio_cfg, as an array. Add a new attribute -
NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD in nested parameter -
NL80211_ATTR_WIPHY_RADIOS. When a request for getting RTS threshold
for a particular radio is received, parse the radio id and get the
required data. Add this data to the newly added nested attribute
NL80211_WIPHY_RADIO_ATTR_RTS_THRESHOLD. Add support to report this
data to userspace.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-4-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, setting RTS threshold is based on per-phy basis, i.e., all the
radios present in a wiphy will take RTS threshold value to be the one sent
from userspace. But each radio in a multi-radio wiphy can have different
RTS threshold requirements.
To extend support to set RTS threshold for each radio, get the radio for
which RTS threshold needs to be changed from the user. Use the attribute
in NL - NL80211_ATTR_WIPHY_RADIO_INDEX, to identify the radio of interest.
Create a new structure - wiphy_radio_cfg and add rts_threshold in it as a
u32 value to store RTS threshold of each radio in a wiphy and allocate
memory for it during wiphy register based on the wiphy.n_radio updated by
drivers. Pass radio id received from the user to mac80211 drivers along
with its corresponding RTS threshold.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-3-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, link station statistics for MLO are filled by mac80211.
But there are some statistics that kept by mac80211 might not be
accurate, so let the driver pre-fill the link statistics. The driver
can fill the values (indicating which field is filled, by setting the
filled bitmapin in link_station structure).
Statistics that driver don't fill are filled by mac80211.
Hence, add link_sta_statistics callback to fill link station statistics
for MLO in sta_set_link_sinfo() by drivers.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-11-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, RX stats packets are incremented for deflink member for
non-ML and multi-link(ML) station case. However, for ML station,
packets should be incremented based on the specific link.
Therefore, if a valid link_id is present, fetch the corresponding
link station information and increment the RX packets for that link.
For non-MLO stations, the deflink will still be used.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-10-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, sinfo structure is supported to fill information at
deflink( or one of the links) level for station. This has problems
when applied to fetch multi-link(ML) station information.
Hence, if valid_links are present, support filling link_station
structure for each link.
This will be helpful to check the link related statistics during MLO.
Additionally, TXQ stats for pertid are applicable at station level
not at link level. Therefore check link_id is less then 0, before
filling TXQ stats in pertid stats.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-9-quic_sarishar@quicinc.com
[fix some indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, sinfo->filled is for set in sta_set_sinfo() after filling
the corresponding fields in station_info structure for station statistics.
For non-ML stations, the fields are correctly filled from sta->deflink
and corresponding sinfo->filled bit are set, but for MLO any one of
link's data is filled and corresponding sinfo->filled bit is set.
For MLO before embed NL message, fields of sinfo structure like
bytes, packets, signal are updated with accumulated, best, least of all
links data. But some of fields like rssi, pertid don't make much sense
at MLO level.
Hence, to prevent misinterpretation, clear sinfo->filled for fields
which don't make much sense at MLO level. This will prevent filling
misleading values in NL message.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-8-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, if a link gets removed in between for a station then
directly accumulated data will fall down to sum of other active links.
This will bring inconsistency in station dump statistics.
For instance, let's take Tx packets
- at t=0-> link-0:2 link-1:3 Tx packets => accumulated = 5
- at t=1-> link-0:4 link-1:6 Tx packets => accumulated = 10
let say at t=2, link-0 went down => link-0:0 link-1:7 => accumulated = 7
Here, suddenly accumulated Tx packets will come down to 7 from 10.
This is showing inconsistency.
Therefore, store link-0 data when it went down and add to accumulated
Tx packet = 11.
Hence, store the removed link statistics data in sta structure and
add it in accumulated statistics for consistency.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-7-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, station_info structure is passed to fill station statistics
from mac80211/drivers. After NL message send to user space for requested
station statistics, memory for station statistics is freed in cfg80211.
Therefore, memory allocation/free for link station statistics should
also happen in cfg80211 only.
Hence, allocate the memory for link_station structure for all
possible links and free in cfg80211_sinfo_release_content().
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-6-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently statistics are handled at link level for multi-link
operation(MLO). There is no provision to check accumulated statistics
for a multi-link(ML) station. Other statistics, such as signal, rates,
are also managed at the link level only.
Statistics such as packets, bytes, signal, rates, etc are useful to
provide overall overview for the ML stations.
Statistics such as packets, bytes are accumulated statistics at MLO level.
However, MLO statistics for rates and signal can not be accumulated since
it won't make much sense. Hence, handle other statistics such as signal,
rates, etc bit differently at MLO level.
The signal could be the best of all links-
e.g. if Link 1 has a signal strength of -70 dBm and Link 2 has -65 dBm,
the signal for MLO will be -65 dBm.
The rate could be determined based on the most recently updated link-
e.g. if link 1 has a rate of 300 Mbps and link 2 has a rate of 450 Mbps,
the MLO rate can be calculated based on the inactivity of each link.
If the inactive time for link 1 is 20 seconds and for link 2 is 10 seconds,
the MLO rate will be the most recently updated rate, which is link 2's
rate of 450 Mbps.
The inactive time, dtim_period and beacon_interval can be taken as the
least value of field from link level.
Similarly, other MLO level applicable fields are handled and the fields
which don't make much sense at MLO level, a subsequent change will handle
to embed NL message.
Hence, add accumulated and other statistics for MLO station if valid links
are present to represent comprehensive overview for the ML stations.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-5-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, statistics is supported at deflink( or one of the links)
level for station. This has problems when applied to multi-link(ML)
connections.
Hence, add changes to support link level statistics to embed NL message
with link related information if valid links are present.
This will be helpful to check the link related statistics during MLO.
The statistics will be embedded into NL message as below:
For non-ML:
cmd->
NL80211_ATTR_IFINDEX
NL80211_ATTR_MAC
NL80211_ATTR_GENERATION
....etc
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_CONNECTED_TIME,
NL80211_STA_INFO_STA_FLAGS,
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
.........etc
For MLO:
cmd ->
NL80211_ATTR_IFINDEX
NL80211_ATTR_MAC
NL80211_ATTR_GENERATION
.......etc
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_CONNECTED_TIME,
NL80211_STA_INFO_STA_FLAGS,
........etc
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MLD_ADDR,
NL80211_ATTR_MLO_LINKS | nested
link_id-1 | nested
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MAC,
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
NL80211_STA_INFO_CONNECTED_TIME,
..........etc.
link_id-2 | nested
NL80211_ATTR_MLO_LINK_ID,
NL80211_ATTR_MAC,
NL80211_ATTR_STA_INFO | nested
NL80211_STA_INFO_RX_BYTES,
NL80211_STA_INFO_TX_BYTES,
NL80211_STA_INFO_CONNECTED_TIME,
.........etc
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-4-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Current implementation of NL80211_GET_STATION does not work for
multi-link operation(MLO) since in case of MLO only deflink (or one
of the links) is considered and not all links.
Therefore to support for MLO, add link_station_info structure
to account link level statistics for station.
Additionally, add valid_links in station_info structure to indicate
bitmap of valid links for MLO. This will be helpful to check the link
related statistics during MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-3-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, in supporting API's to fill sinfo structure from sta
structure, is mapped to fill the fields from sta->deflink. However,
for multi-link (ML) station, sinfo structure should be filled from
corresponding link_id.
Therefore, add link_id as an additional argument in supporting API's
for filling sinfo structure correctly. Link_id is set to -1 for non-ML
station and corresponding link_id for ML stations. In supporting API's
for filling sinfo structure, check for link_id, if link_id < 0, fill
the sinfo structure from sta->deflink, otherwise fill from
sta->link[link_id].
Current, changes are done at the deflink level i.e, pass -1 as link_id.
Actual link_id will be added in subsequent patches to support
station statistics for MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since the link/conf pointers can be accessed without any
protection other than RCU, make sure the data is actually
set up before publishing the structures.
Fixes: b2e8434f1829 ("wifi: mac80211: set up/tear down client vif links properly")
Link: https://patch.msgid.link/20250624130749.9a308b713c74.I4a80f5eead112a38730939ea591d2e275c721256@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Fix L2CAP MTU negotiation
- hci_core: Fix use-after-free in vhci_flush()
- btintel_pcie: Fix potential race condition in firmware download
- hci_qca: fix unable to load the BT driver
* tag 'for-net-2025-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_core: Fix use-after-free in vhci_flush()
driver: bluetooth: hci_qca:fix unable to load the BT driver
Bluetooth: L2CAP: Fix L2CAP MTU negotiation
Bluetooth: btintel_pcie: Fix potential race condition in firmware download
====================
Link: https://patch.msgid.link/20250623165405.227619-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, when a non-DFS channel is brought up and the bandwidth is
expanded from 80 MHz to 160 MHz, where the primary 80 MHz is non-DFS
and the secondary 80 MHz consists of DFS channels, radar detection
fails if radar occurs in the secondary 80 MHz.
When the channel is switched from 80 MHz to 160 MHz, with the primary
80 MHz being non-DFS and the secondary 80 MHz consisting of DFS
channels, the radar required flag in the channel switch parameters
is set to true. However, when using a reserved channel context,
it is not updated in sdata, which disables radar detection in the
secondary 80 MHz DFS channels.
Update the radar required flag in sdata to fix this issue when using
a reserved channel context.
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Ramasamy Kaliappan <ramasamy.kaliappan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250608140324.1687117-1-ramasamy.kaliappan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a check to determine whether arp/nd offload enabling
request is allowed. If there is any interface acts as ap
mode and is operating, reject the request of arp offload
enabling from cfg80211.
Signed-off-by: Ting-Ying Li <tingying.li@cypress.com>
Signed-off-by: Ian Lin <ian.lin@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250606093444.15753-1-ian.lin@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Kory Maincent says:
====================
PSE: Improve documentation clarity
Thanks to new PSE driver being proposed on the mailinglist figured out
there was some unclear documentation, which lead the developer on the
wrong path. Clarify these documentation.
The changes focus on clarifying the setup_pi_matrix callback behavior
and improving device tree binding descriptions, particularly around
channel-to-PI mapping relationships that are critical for proper PSE
controller integration.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
====================
Link: https://patch.msgid.link/20250620-poe_doc_improve-v1-0-96357bb95d52@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Improve the setup_pi_matrix callback documentation to clarify its purpose
and usage. The enhanced description explains that PSE PI devicetree nodes
are pre-parsed before this callback is invoked, and drivers should utilize
pcdev->pi[x]->pairset[y].np to map PSE controller hardware ports to their
corresponding Power Interfaces.
This clarification helps driver implementers understand the callback's
role in establishing the hardware-to-PI relationship mapping.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250620-poe_doc_improve-v1-2-96357bb95d52@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Improve the channels property description to better explain the
relationship between physical delivery channels and PSE PI pairsets.
The previous description was unclear about how channels are referenced
and used in the port matrix mapping.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250620-poe_doc_improve-v1-1-96357bb95d52@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Unfortunately, FWs of some devices don't have the version of the
iwl_mac_config_cmd defined in the TLVs. We send 0 as the 'def argument
to iwl_fw_lookup_cmd_ver, so for such FWs, the return value will be 0,
leading to a warning, and to not sending the command.
Fix this by assuming that the default version is 1.
Fixes: 83f3ac2848b4 ("wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250624071427.2662621-1-miriam.rachel.korenblit@intel.com
|
|
Kuniyuki Iwashima says:
====================
af_unix: Fix two OOB issues.
From: Kuniyuki Iwashima <kuniyu@google.com>
Recently, two issues are reported regarding MSG_OOB.
Patch 1 fixes issues that happen when multiple consumed OOB
skbs are placed consecutively in the recv queue.
Patch 2 fixes an inconsistent behaviour that close()ing a socket
with a consumed OOB skb at the head of the recv queue triggers
-ECONNRESET on the peer's recv().
v1: https://lore.kernel.org/netdev/20250618043453.281247-1-kuni1840@gmail.com/
====================
Link: https://patch.msgid.link/20250619041457.1132791-1-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A new function resetpair() calls close() for the receiver and checks
the return value from recv() on the initial sender side.
Now resetpair() is added to each test case and some additional test
cases.
Note that TCP sets -ECONNRESET to the consumed OOB, but we have decided
not to touch TCP MSG_OOB code in the past.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:236:ex_oob_ex_oob:AF_UNIX :Connection reset by peer
# msg_oob.c:237:ex_oob_ex_oob:Expected:
# msg_oob.c:239:ex_oob_ex_oob:Expected ret[0] (-1) == expected_len (0)
# ex_oob_ex_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob
not ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# FAILED: 36 / 48 tests passed.
# Totals: pass:36 fail:12 xfail:0 xpass:0 skip:0 error:0
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob ...
# msg_oob.c:244:ex_oob_ex_oob:AF_UNIX :
# msg_oob.c:245:ex_oob_ex_oob:TCP :Connection reset by peer
# OK msg_oob.no_peek.ex_oob_ex_oob
ok 14 msg_oob.no_peek.ex_oob_ex_oob
...
# PASSED: 48 / 48 tests passed.
# Totals: pass:48 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-5-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Christian Brauner reported that even after MSG_OOB data is consumed,
calling close() on the receiver socket causes the peer's recv() to
return -ECONNRESET:
1. send() and recv() an OOB data.
>>> from socket import *
>>> s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
>>> s1.send(b'x', MSG_OOB)
1
>>> s2.recv(1, MSG_OOB)
b'x'
2. close() for s2 sets ECONNRESET to s1->sk_err even though
s2 consumed the OOB data
>>> s2.close()
>>> s1.recv(10, MSG_DONTWAIT)
...
ConnectionResetError: [Errno 104] Connection reset by peer
Even after being consumed, the skb holding the OOB 1-byte data stays in
the recv queue to mark the OOB boundary and break recv() at that point.
This must be considered while close()ing a socket.
Let's skip the leading consumed OOB skb while checking the -ECONNRESET
condition in unix_release_sock().
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Christian Brauner <brauner@kernel.org>
Closes: https://lore.kernel.org/netdev/20250529-sinkt-abfeuern-e7b08200c6b0@brauner/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://patch.msgid.link/20250619041457.1132791-4-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let's add a test case where consecutive concumed OOB skbs stay
at the head of the queue.
Without the previous patch, ioctl(SIOCATMARK) assertion fails.
Before:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# msg_oob.c:305:ex_oob_ex_oob_oob:Expected answ[0] (0) == oob_head (1)
# ex_oob_ex_oob_oob: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ex_oob_oob
not ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
After:
# RUN msg_oob.no_peek.ex_oob_ex_oob_oob ...
# OK msg_oob.no_peek.ex_oob_ex_oob_oob
ok 12 msg_oob.no_peek.ex_oob_ex_oob_oob
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-3-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jann Horn reported a use-after-free in unix_stream_read_generic().
The following sequences reproduce the issue:
$ python3
from socket import *
s1, s2 = socketpair(AF_UNIX, SOCK_STREAM)
s1.send(b'x', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'y', MSG_OOB)
s2.recv(1, MSG_OOB) # leave a consumed OOB skb
s1.send(b'z', MSG_OOB)
s2.recv(1) # recv 'z' illegally
s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free)
Even though a user reads OOB data, the skb holding the data stays on
the recv queue to mark the OOB boundary and break the next recv().
After the last send() in the scenario above, the sk2's recv queue has
2 leading consumed OOB skbs and 1 real OOB skb.
Then, the following happens during the next recv() without MSG_OOB
1. unix_stream_read_generic() peeks the first consumed OOB skb
2. manage_oob() returns the next consumed OOB skb
3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb
4. unix_stream_read_generic() reads and frees the OOB skb
, and the last recv(MSG_OOB) triggers KASAN splat.
The 3. above occurs because of the SO_PEEK_OFF code, which does not
expect unix_skb_len(skb) to be 0, but this is true for such consumed
OOB skbs.
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
skb = skb_peek_next(skb, &sk->sk_receive_queue);
...
}
In addition to this use-after-free, there is another issue that
ioctl(SIOCATMARK) does not function properly with consecutive consumed
OOB skbs.
So, nothing good comes out of such a situation.
Instead of complicating manage_oob(), ioctl() handling, and the next
ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs,
let's not leave such consecutive OOB unnecessarily.
Now, while receiving an OOB skb in unix_stream_recv_urg(), if its
previous skb is a consumed OOB skb, it is freed.
[0]:
BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027)
Read of size 4 at addr ffff888106ef2904 by task python3/315
CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:122)
print_report (mm/kasan/report.c:409 mm/kasan/report.c:521)
kasan_report (mm/kasan/report.c:636)
unix_stream_read_actor (net/unix/af_unix.c:3027)
unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f8911fcea06
Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d
RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06
RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006
RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20
R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
__kasan_slab_alloc (mm/kasan/common.c:348)
kmem_cache_alloc_node_noprof (./include/linux/kasan.h:250 mm/slub.c:4148 mm/slub.c:4197 mm/slub.c:4249)
__alloc_skb (net/core/skbuff.c:660 (discriminator 4))
alloc_skb_with_frags (./include/linux/skbuff.h:1336 net/core/skbuff.c:6668)
sock_alloc_send_pskb (net/core/sock.c:2993)
unix_stream_sendmsg (./include/net/sock.h:1847 net/unix/af_unix.c:2256 net/unix/af_unix.c:2418)
__sys_sendto (net/socket.c:712 (discriminator 20) net/socket.c:727 (discriminator 20) net/socket.c:2226 (discriminator 20))
__x64_sys_sendto (net/socket.c:2233 (discriminator 1) net/socket.c:2229 (discriminator 1) net/socket.c:2229 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Freed by task 315:
kasan_save_stack (mm/kasan/common.c:48)
kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1))
kasan_save_free_info (mm/kasan/generic.c:579 (discriminator 1))
__kasan_slab_free (mm/kasan/common.c:271)
kmem_cache_free (mm/slub.c:4643 (discriminator 3) mm/slub.c:4745 (discriminator 3))
unix_stream_read_generic (net/unix/af_unix.c:3010)
unix_stream_recvmsg (net/unix/af_unix.c:3048)
sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20))
__sys_recvfrom (net/socket.c:2278)
__x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1))
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
The buggy address belongs to the object at ffff888106ef28c0
which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 68 bytes inside of
freed 224-byte region [ffff888106ef28c0, ffff888106ef29a0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff888106ef3cc0 pfn:0x106ef2
head: order:1 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x200000000000040(head|node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
raw: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000040 ffff8881001d28c0 ffffea000422fe00 0000000000000004
head: ffff888106ef3cc0 0000000080190010 00000000f5000000 0000000000000000
head: 0200000000000001 ffffea00041bbc81 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888106ef2800: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888106ef2880: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb
>ffff888106ef2900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888106ef2980: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc
ffff888106ef2a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Link: https://patch.msgid.link/20250619041457.1132791-2-kuni1840@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
