| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"The main fix that really needs to get in is the revert of the patch
adding the new mtd_master class, because it entirely fails the
partitioning if a specific Kconfig option is set. We need to think how
to handle that differently, so let's revert it as we need to get back
to the pen and paper situation again.
Otherwise the definition of some Winbond SPI NAND chips are receiving
some fixes (geometry and maximum frequency, mostly).
And finally a small memory leak gets also fixed"
* tag 'mtd/fixes-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spinand: fix memory leak of ECC engine conf
mtd: spinand: winbond: Prevent unsupported frequencies on dual/quad I/O variants
mtd: spinand: winbond: Increase maximum frequency on an octal operation
mtd: spinand: winbond: Fix W35N number of planes/LUN
Revert "mtd: core: always create master device"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small and obvious driver fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: elx: efct: Fix memory leak in efct_hw_parse_filter()
scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()
|
|
ath79_misc_irq_init() was defined but unused since commit 51fa4f8912c0
("MIPS: ath79: drop legacy IRQ code"), so it's time to drop it.
The build also warns about a missing prototype of get_c0_perfcount_int().
Remove the stale leftover function and add the missing include.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/OSBPR01MB167032D2017645200787AAEBBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
|
|
Currently the call_rcu() API does not check whether a callback
pointer is NULL. If NULL is passed, rcu_core() will try to invoke
it, resulting in NULL pointer dereference and a kernel crash.
To prevent this and improve debuggability, this patch adds a check
for NULL and emits a kernel stack trace to help identify a faulty
caller.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
|
|
Exit to userspace for TDG.VP.VMCALL<GetTdVmCallInfo> via KVM_EXIT_TDX,
to allow userspace to provide information about the support of
TDVMCALLs when r12 is 1 for the TDVMCALLs beyond the GHCI base API.
GHCI spec defines the GHCI base TDVMCALLs: <GetTdVmCallInfo>, <MapGPA>,
<ReportFatalError>, <Instruction.CPUID>, <#VE.RequestMMIO>,
<Instruction.HLT>, <Instruction.IO>, <Instruction.RDMSR> and
<Instruction.WRMSR>. They must be supported by VMM to support TDX guests.
For GetTdVmCallInfo
- When leaf (r12) to enumerate TDVMCALL functionality is set to 0,
successful execution indicates all GHCI base TDVMCALLs listed above are
supported.
Update the KVM TDX document with the set of the GHCI base APIs.
- When leaf (r12) to enumerate TDVMCALL functionality is set to 1, it
indicates the TDX guest is querying the supported TDVMCALLs beyond
the GHCI base TDVMCALLs.
Exit to userspace to let userspace set the TDVMCALL sub-function bit(s)
accordingly to the leaf outputs. KVM could set the TDVMCALL bit(s)
supported by itself when the TDVMCALLs don't need support from userspace
after returning from userspace and before entering guest. Currently, no
such TDVMCALLs implemented, KVM just sets the values returned from
userspace.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Handle TDVMCALL for GetQuote to generate a TD-Quote.
GetQuote is a doorbell-like interface used by TDX guests to request VMM
to generate a TD-Quote signed by a service hosting TD-Quoting Enclave
operating on the host. A TDX guest passes a TD Report (TDREPORT_STRUCT) in
a shared-memory area as parameter. Host VMM can access it and queue the
operation for a service hosting TD-Quoting enclave. When completed, the
Quote is returned via the same shared-memory area.
KVM only checks the GPA from the TDX guest has the shared-bit set and drops
the shared-bit before exiting to userspace to avoid bleeding the shared-bit
into KVM's exit ABI. KVM forwards the request to userspace VMM (e.g. QEMU)
and userspace VMM queues the operation asynchronously. KVM sets the return
code according to the 'ret' field set by userspace to notify the TDX guest
whether the request has been queued successfully or not. When the request
has been queued successfully, the TDX guest can poll the status field in
the shared-memory area to check whether the Quote generation is completed
or not. When completed, the generated Quote is returned via the same
buffer.
Add KVM_EXIT_TDX as a new exit reason to userspace. Userspace is
required to handle the KVM exit reason as the initial support for TDX,
by reentering KVM to ensure that the TDVMCALL is complete. While at it,
add a note that KVM_EXIT_HYPERCALL also requires reentry with KVM_RUN.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the new TDVMCALL status code TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED and
return it for unimplemented TDVMCALL subfunctions.
Returning TDVMCALL_STATUS_INVALID_OPERAND when a subfunction is not
implemented is vague because TDX guests can't tell the error is due to
the subfunction is not supported or an invalid input of the subfunction.
New GHCI spec adds TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED to avoid the
ambiguity. Use it instead of TDVMCALL_STATUS_INVALID_OPERAND.
Before the change, for common guest implementations, when a TDX guest
receives TDVMCALL_STATUS_INVALID_OPERAND, it has two cases:
1. Some operand is invalid. It could change the operand to another value
retry.
2. The subfunction is not supported.
For case 1, an invalid operand usually means the guest implementation bug.
Since the TDX guest can't tell which case is, the best practice for
handling TDVMCALL_STATUS_INVALID_OPERAND is stopping calling such leaf,
treating the failure as fatal if the TDVMCALL is essential or ignoring
it if the TDVMCALL is optional.
With this change, TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED could be sent to
old TDX guest that do not know about it, but it is expected that the
guest will make the same action as TDVMCALL_STATUS_INVALID_OPERAND.
Currently, no known TDX guest checks TDVMCALL_STATUS_INVALID_OPERAND
specifically; for example Linux just checks for success.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Return it for untrapped KVM_HC_MAP_GPA_RANGE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- correct the ACPI GPIO access mode in gpio-loongson-64bit
- only obtain the interrupt for a single instance of the chip
controlled by gpio-mlxbf3
- fix an invalid value return from probe() in gpio-pca953x
- add missing MODULE_DEVICE_TABLE() to gpio-spacemit
- update the HiSilicon GPIO driver maintainer entry
* tag 'gpio-fixes-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: only get IRQ for device instance 0
gpio: pca953x: fix wrong error probe return value
gpio: spacemit: Add missing MODULE_DEVICE_TABLE
gpio: loongson-64bit: Correct Loongson-7A2000 ACPI GPIO access mode
MAINTAINERS: Update HiSilicon GPIO driver maintainer
|
|
into HEAD
KVM/riscv fixes for 6.16, take #1
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #3
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific at this
time:
- Fixes for Cirrus codecs with SoundWire, including firmware name
updates
- Fix for i.MX8 SoC DSP
- Usual HD-audio, USB-audio, and ASoC AMD quirks
- Fixes for legendary SoundBlaster AWE32 ISA device (a real one, we
still got a bug report after 25 years)
- Minor build fixes"
* tag 'sound-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable headset Mic on Positivo P15X
ASoC: Intel: sof-function-topology-lib: Print out the unsupported dmic count
ASoC: doc: cs35l56: Add CS35L63 to the list of supported devices
ASoC: SOF: imx8: add core shutdown operation for imx8/imx8x
ALSA: hda/realtek: Add quirk for Asus GA605K
ALSA: hda/realtek: enable headset mic on Latitude 5420 Rugged
ASoC: amd: yc: update quirk data for HP Victus
ASoC: apple: mca: Drop default ARCH_APPLE in Kconfig
ALSA: usb-audio: Rename ALSA kcontrol PCM and PCM1 for the KTMicro sound card
ASoC: amd: yc: Add quirk for MSI Bravo 17 D7VF internal mic
ASoC: doc: cs35l56: Update to add new SoundWire firmware filename suffix
ASoC: cs35l56: Use SoundWire address as alternate firmware suffix on L56 B0
ASoC: cs35l56: Use SoundWire address as firmware name suffix for new silicon
ASoC: sdw_utils: Fix potential NULL pointer deref in is_sdca_endpoint_present()
ALSA: sb: Force to disable DMAs once when DMA mode is changed
ALSA: sb: Don't allow changing the DMA mode during operations
ALSA: hda/realtek: Add quirk for Asus GU605C
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X513EA
ALSA: hda/realtek - Add mute LED support for HP Victus 16-s1xxx and HP Victus 15-fa1xxx
ALSA: ctxfi: Replace deprecated strcpy() with strscpy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's nothing major (even the vmalloc one is just suppressing a
potential warning) but all worth having, nonetheless.
- Suppress KASAN false positive in stack unwinding code
- Drop redundant reset of the GCS state on exec()
- Don't try to descend into a !present PMD when creating a huge
vmap() entry at the PUD level
- Fix a small typo in the arm64 booting Documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
|
|
Some modules have BT_EN enabled via a hardware pull-up,
meaning it is not defined in the DTS and is not controlled
through the power sequence. In such cases, fall through
to follow the legacy flow.
Signed-off-by: Shuai Zhang <quic_shuaz@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
OBEX download from iPhone is currently slow due to small packet size
used to transfer data which doesn't follow the MTU negotiated during
L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72
> ACL Data RX: Handle 11 flags 0x02 dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The MTUs are negotiated for each direction. In this traces 32767 for
iPhone->localhost and no MTU for localhost->iPhone, which based on
'4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part
A):
The only parameters that should be included in the
L2CAP_CONFIGURATION_REQ packet are those that require different
values than the default or previously agreed values.
...
Any missing configuration parameters are assumed to have their
most recently explicitly or implicitly accepted values.
and '5.1 Maximum transmission unit (MTU)':
If the remote device sends a positive L2CAP_CONFIGURATION_RSP
packet it should include the actual MTU to be used on this channel
for traffic flowing into the local device.
...
The default value is 672 octets.
is set by BlueZ to 672 bytes.
It seems that the iPhone used the lowest negotiated value to transfer
data to the localhost instead of the negotiated one for the incoming
direction.
This could be fixed by using the MTU negotiated for the other
direction, if exists, in the L2CAP_CONFIGURATION_RSP.
This allows to use segmented packets as in the following traces:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 22 len 4
PSM: 4103 (0x1007)
Source CID: 72
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 24 len 19
Destination CID: 2832
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 15 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 15 len 21
Source CID: 2832
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 24 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Start (len 21884) TxSeq 1 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Continuation TxSeq 2 ReqSeq 2
This has been tested with kernel 5.4 and BlueZ 5.77.
Cc: stable@vger.kernel.org
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
During firmware download, if an error occurs, interrupts must be
disabled, synchronized, and re-enabled before retrying the download.
This change ensures proper interrupt handling to prevent race
conditions.
Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
It is possible when an inode is split into segments for multi-threaded
compression, and the tail extent of a segment could also be small.
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250620153108.1368029-1-hsiangkao@linux.alibaba.com
|
|
A previous fix corrected the retry condition for when to continue a
current bundle, but it missed that the current (not the total) transfer
count also applies to the buffer put. If not, then for incrementally
consumed buffer rings repeated completions on the same request may end
up over consuming.
Reported-by: Roy Tang (ErgoniaTrading) <royonia@ergonia.io>
Cc: stable@vger.kernel.org
Fixes: 3a08988123c8 ("io_uring/net: only retry recv bundle for a full transfer")
Link: https://github.com/axboe/liburing/issues/1423
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20250610-gpiochip-set-rv-ssb-v1-1-0bee5b45b411@linaro.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Don't populate the read-only array cfg_offset on the stack at run time,
instead make it static const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250619082554.1834654-1-colin.i.king@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Link: https://patch.msgid.link/20250613102624.3077418-1-liyuesong@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since secs_to_jiffies()(commit:b35108a51cf7) has been introduced, we can
use it to avoid scaling the time to msec.
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20250612021446.3465972-1-liyuesong@vivo.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
driver
In the case of SME-in-driver, the driver can internally choose to
update the links based on the AP MLD recommendation and do link
reconfiguration negotiation with AP MLD.
(e.g., After the driver processing the BSS Transition Management request
frame received from the AP MLD with Neighbor Report containing
Multi-Link element with recommended links information chooses to do link
reconfiguration negotiation with AP MLD).
To support this, extend cfg80211_mlo_reconf_add_done() and
NL80211_CMD_ASSOC_MLO_RECONF to indicate added links information for
driver-initiated link reconfiguration requests. For removed links,
the driver indicates links information using the
NL80211_CMD_LINKS_REMOVED event for driver-initiated cases, the same as
supplicant initiated cases.
For the driver-initiated case, cfg80211 will receive link
reconfiguration result asynchronously from driver so holding BSSes of
the accepted add links is needed in the event path. Also, no need of
unhold call for the rejected add link BSSes since there was no hold call
happened previously.
Once the supplicant receives the NL80211_CMD_ASSOC_MLO_RECONF event,
it needs to process the information about newly added links and install
per-link group keys (e.g., GTK/IGTK/BIGTK etc.).
In case of the SME-in-driver, using a vendor interface etc. to notify
the supplicant to initiate a link reconfiguration request and then
supplicant sending command to the cfg80211 can lead to race conditions.
The correct design to avoid this is that the driver indicates the
cfg80211 directly with the results of the link reconfiguration
negotiation.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-3-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The existing documentation for the NL80211_CMD_ASSOC_MLO_RECONF
does not clearly explain handling of link reconfiguration request
results from the driver.
Add documentation to explain that the command is used as an event to
notify userspace about added links information, and that the existing
NL80211_CMD_LINKS_REMOVED command is used to notify userspace about
removed links information.
Signed-off-by: Kavita Kavita <quic_kkavita@quicinc.com>
Link: https://patch.msgid.link/20250604105757.2542-2-quic_kkavita@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Enable the host MLME flag to allow supported W8997 chipsets to
use WPA3. This feature requires firmware support (V2 API key), which
the driver validates before activation.
Tested using sdsd8997_combo_v4.bin from commit
211fbc287a0b ("linux-firmware: Update FW files for MRVL SD8997 chips")
[ 5.956510] mwifiex_sdio mmc2:0001:1: info: FW download over, size 623352 bytes
...
[ 6.825456] mwifiex_sdio mmc2:0001:1: WLAN FW is active
...
[ 12.171950] mwifiex_sdio mmc2:0001:1: host_mlme: enable, key_api: 2
[ 12.226206] mwifiex_sdio mmc2:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p197)
root@verdin-imx8mm-14700070:~# strings /lib/firmware/mrvl/sdsd8997_combo_v4.bin |grep 16
$Id: w8997o-V4, RF878X, FP68_LINUX, 16.68.1.p197.1 $
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250530094711.915574-1-rafael@beims.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, in ieee80211_assign_beacon() mbssid count is updated as link's
bssid_indicator. mbssid count is the total number of MBSSID elements in
the beacon instead of Max BSSID indicator of the Multiple BSS set.
This will result in drivers obtaining an invalid bssid_indicator for BSSes
in a Multiple BSS set.
Fix this by updating link's bssid_indicator from MBSSID element for
Transmitting BSS and update the same for all of its Non-Transmitting BSSes.
Fixes: dde78aa52015 ("mac80211: update bssid_indicator in ieee80211_assign_beacon")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20250530040940.3188537-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, in multi-radio wiphy cases, if one radio is operating on a DFS
channel, -EBUSY is returned even when a scan is requested on a different
radio. Because of this, an MLD AP with one radio (link) on a DFS channel
and Automatic Channel Selection (ACS) on another radio (link) cannot be
brought up.
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a radio is operating on a DFS channel and a scan is
requested on a different radio of the same wiphy, the scan can be allowed
simultaneously without impacting the DFS operations.
Add logic to check the underlying radio used for the requested scan. If the
radio on which DFS is already running is not being used, allow the scan
operation; otherwise, return -EBUSY.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-3-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently, in multi-radio wiphy cases, if a scan is ongoing on one radio,
-EBUSY is returned when DFS or a channel switch is initiated on another
radio. Because of this, an MLD AP with one radio (link) in an ongoing scan
cannot initiate DFS or a channel switch on another radio (link).
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a scan is ongoing on one underlying radio and DFS or a
channel switch is requested on a different underlying radio of the same
wiphy, these operations can be allowed simultaneously.
Add logic to check the underlying radio used for the ongoing scan. If the
radio on which DFS or a channel switch is requested is not being used for
the scan, allow the operation; otherwise, return -EBUSY.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-2-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add utility API cfg80211_get_radio_idx_by_chan() to retrieve the radio
index corresponding to a given channel in a multi-radio wiphy.
This utility function can be used when we want to check the radio-specific
data for a channel in a multi-radio wiphy. For example, it can help
determine the radio index required to handle a scan request. This index
can then be used to decide whether the scan can proceed without
interfering with ongoing DFS operations on another radio.
Signed-off-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-1-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Drivers that support Tx power insertion could examine the outgoing Radio
measurement packet and depending on the packet type, the driver can
insert specific data fields in it. These action field values will help
drivers classify the action code within the Radio Measurement action
packet.
These action fields are defined in IEEE 802.11-2024 - Table 9-470, Radio
Measurement Action field values.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250528-add_rrm_action_code-v1-1-6b7c78b5bbaf@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Limit rate_idx to IL_LAST_OFDM_RATE for 5GHz band for thinkable case
the index is incorrect.
Reported-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reported-by: Alexei Safin <a.safin@rosa.ru>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20250525144524.GA172583@wp.pl
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
|
|
Pull block fixes from Jens Axboe:
- Two fixes for aoe which fixes issues dating back to when this driver
was converted to blk-mq
- Fix for ublk, checking for valid queue depth and count values before
setting up a device
* tag 'block-6.16-20250619' of git://git.kernel.dk/linux:
ublk: santizize the arguments from userspace when adding a device
aoe: defer rexmit timer downdev work to workqueue
aoe: clean device rq_list in aoedev_downdev()
|
|
Pull io_uring fixes from Jens Axboe:
- Two fixes for error injection failures. One fixes a task leak issue
introduced in this merge window, the other an older issue with
handling allocation of a mapped buffer.
- Fix for a syzbot issue that triggers a kmalloc warning on attempting
an allocation that's too large
- Fix for an error injection failure causing a double put of a task,
introduced in this merge window
* tag 'io_uring-6.16-20250619' of git://git.kernel.dk/linux:
io_uring: fix potential page leak in io_sqe_buffer_register()
io_uring/sqpoll: don't put task_struct on tctx setup failure
io_uring: remove duplicate io_uring_alloc_task_context() definition
io_uring: fix task leak issue in io_wq_create()
io_uring/rsrc: validate buffer count with offset for cloning
|
|
Pull drm fixes from Dave Airlie:
"Bit of an uptick in fixes for rc3, msm and amdgpu leading the way,
with i915/xe/nouveau with a few each and then some scattered misc
bits, nothing looks too crazy:
msm:
- Display:
- Fixed DP output on SDM845
- Fixed 10nm DSI PLL init
- GPU:
- SUBMIT ioctl error path leak fixes
- drm half of stall-on-fault fixes
- a7xx: Missing CP_RESET_CONTEXT_STATE
- Skip GPU component bind if GPU is not in the device table
i915:
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
xe:
- A workaround update
- Fix memset on iomem
- Fix early wedge on GuC Load failure
amdgpu:
- DP tunneling fix
- LTTPR fix
- DSC fix
- DML2.x ABGR16161616 fix
- RMCM fix
- Backlight fixes
- GFX11 kicker support
- SDMA reset fixes
- VCN 5.0.1 fix
- Reset fix
- Misc small fixes
amdkfd:
- SDMA reset fix
- Fix race in GWS scheduling
nouveau:
- update docs reference
- fix backlight name buffer size
- fix UAF in r535 gsp rpc msg
- fix undefined shift
mgag200:
- drop export header
ast:
- drop export header
malidp:
- drop informational error
ssd130x:
- fix clear columns
etnaviv:
- scheduler locking fix
v3d:
- null pointer crash fix"
* tag 'drm-fixes-2025-06-20' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/xe: Fix early wedge on GuC load failure
drm/xe: Fix memset on iomem
drm/xe/bmg: Update Wa_16023588340
drm/amdgpu/sdma5.2: init engine reset mutex
drm/amdkfd: Fix race in GWS queue scheduling
drm/amdgpu/sdma5: init engine reset mutex
drm/amdgpu: switch job hw_fence to amdgpu_fence
drm/amdgpu: Fix SDMA UTC_L1 handling during start/stop sequences
drm/amdgpu: Release reset locks during failures
drm/amd/display: Check dce_hwseq before dereferencing it
drm/amdgpu: VCN v5_0_1 to prevent FW checking RB during DPG pause
drm/amdgpu: Use logical instance ID for SDMA v4_4_2 queue operations
drm/amdgpu: Fix SDMA engine reset with logical instance ID
drm/amdgpu: add kicker fws loading for gfx11/smu13/psp13
drm/amdgpu: Add kicker device detection
drm/amd/display: Export full brightness range to userspace
drm/amd/display: Only read ACPI backlight caps once
drm/amd/display: Fix RMCM programming seq errors
drm/amd/display: Fix mpv playback corruption on weston
drm/amd/display: Add more checks for DSC / HUBP ONO guarantees
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash (broken fallback finup) and
reinstates a Kconfig option to control the extra self-tests"
* tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Fix infinite recursion in ahash_def_finup
crypto: testmgr - reinstate kconfig control over full self-tests
|
|
msync and nommu are directly related to memory mapping, mincore is less so
but all are roughly speaking operating on virtual memory mappings from the
point of view of the user so this seems the most appropriate place for
them.
Link: https://lkml.kernel.org/r/20250617144130.147847-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These files seem best suited to shmem.
Link: https://lkml.kernel.org/r/20250617161359.166955-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
page_vma_mapped_walk() is used to traverse page tables from a VMA, used by
rmap logic once the reverse mapping has been traversed to the VMA level.
It is also used by other users (migration, damon, etc.) but is primarily
used by the reverse mapping and is a key part of its logic, so it seems
appropriate to place it here.
Link: https://lkml.kernel.org/r/20250617165142.173716-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This file is clearly specific to hugetlb so this seems the most
appropriate place for it.
Link: https://lkml.kernel.org/r/20250617171538.178042-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
These files comprise the bootmem info logic which is initialised on
startup and also memory tests that are run on startup and as such this
seems the most appropriate section for them.
Link: https://lkml.kernel.org/r/20250617174538.188977-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Change my role to Maintainer as I am quite involved in HugeTLB
development, and will be more so with the upcoming HugetLB-pagewalk
unification, so I would like to help Munchun take care of the code.
Besides, having two people will help in offloading some pressure.
Also add David as a Reviewer since he has quite some knowledge in the
field and has already provided valuable feedback.
Link: https://lkml.kernel.org/r/20250617185910.471406-1-osalvador@suse.de
Signed-off-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Temporarily clear the preallocation flag when explicitly requesting
allocations. Pre-existing allocations are already counted against the
request through mas_node_count_gfp(), but the allocations will not happen
if the MA_STATE_PREALLOC flag is set. This flag is meant to avoid
re-allocating in bulk allocation mode, and to detect issues with
preallocation calculations.
The MA_STATE_PREALLOC flag should also always be set on zero allocations
so that detection of underflow allocations will print a WARN_ON() during
consumption.
User visible effect of this flaw is a WARN_ON() followed by a null pointer
dereference when subsequent requests for larger number of nodes is
ignored, such as the vma merge retry in mmap_region() caused by drivers
altering the vma flags (which happens in v6.6, at least)
Link: https://lkml.kernel.org/r/20250616184521.3382795-3-Liam.Howlett@oracle.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Reported-by: Hailong Liu <hailong.liu@oppo.com>
Link: https://lore.kernel.org/all/1652f7eb-a51b-4fee-8058-c73af63bacd1@oppo.com/
Link: https://lore.kernel.org/all/20250428184058.1416274-1-Liam.Howlett@oracle.com/
Link: https://lore.kernel.org/all/20250429014754.1479118-1-Liam.Howlett@oracle.com/
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Hailong Liu <hailong.liu@oppo.com>
Cc: zhangpeng.00@bytedance.com <zhangpeng.00@bytedance.com>
Cc: Steve Kang <Steve.Kang@unisoc.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We previously overlooked GUP test files that sensibly should belong to the
GUP section, include them now.
Link: https://lkml.kernel.org/r/20250616200844.560225-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The working set logic belongs very much to the reclaim section and is
otherwise not assigned to any other MAINTAINERS section so add it here.
Link: https://lkml.kernel.org/r/20250616201643.561626-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If uprobes are not enabled, the test currently fails with:
7151 12:46:54.627936 # # # RUN merge.handle_uprobe_upon_merged_vma ...
7152 12:46:54.639014 # # f /sys/bus/event_source/devices/uprobe/type
7153 12:46:54.639306 # # fopen: No such file or directory
7154 12:46:54.650451 # # # merge.c:473:handle_uprobe_upon_merged_vma:Expected
read_sysfs("/sys/bus/event_source/devices/uprobe/type", &type) (1) == 0 (0)
7155 12:46:54.650730 # # # handle_uprobe_upon_merged_vma: Test terminated by assertion
7156 12:46:54.661750 # # # FAIL merge.handle_uprobe_upon_merged_vma
7157 12:46:54.662030 # # not ok 8 merge.handle_uprobe_upon_merged_vma
Skipping is a more sane and friendly behavior here.
Link: https://lkml.kernel.org/r/20250610122209.3177587-1-pfalcato@suse.de
Fixes: efe99fabeb11 ("selftests/mm: add test about uprobe pte be orphan during vma merge")
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reported-by: Aishwarya <aishwarya.tcv@arm.com>
Closes: https://lore.kernel.org/linux-mm/20250610103729.72440-1-aishwarya.tcv@arm.com/
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by : Donet Tom <donettom@linux.ibm.com>
Reviewed-by : Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After reverting the transition to the generic min heap library, bcache no
longer depends on MIN_HEAP. The select entry can be removed to reduce
code size and shrink the kernel's attack surface.
This change effectively reverts the bcache-related part of commit
92a8b224b833 ("lib/min_heap: introduce non-inline versions of min heap API
functions").
This is part of a series of changes to address a performance regression
caused by the use of the generic min_heap implementation.
As reported by Robert, bcache now suffers from latency spikes, with P100
(max) latency increasing from 600 ms to 2.4 seconds every 5 minutes.
These regressions degrade bcache's effectiveness as a low-latency cache
layer and lead to frequent timeouts and application stalls in production
environments.
Link: https://lore.kernel.org/lkml/CAJhEC05+0S69z+3+FB2Cd0hD+pCRyWTKLEOsc8BOmH73p1m+KQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20250614202353.1632957-4-visitorckw@gmail.com
Fixes: 866898efbb25 ("bcache: remove heap-related macros and switch to generic min_heap")
Fixes: 92a8b224b833 ("lib/min_heap: introduce non-inline versions of min heap API functions")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reported-by: Robert Pang <robertpang@google.com>
Closes: https://lore.kernel.org/linux-bcache/CAJhEC06F_AtrPgw2-7CvCqZgeStgCtitbD-ryuPpXQA-JG5XXw@mail.gmail.com
Acked-by: Coly Li <colyli@kernel.org>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 866898efbb25bb44fd42848318e46db9e785973a.
The generic bottom-up min_heap implementation causes performance
regression in invalidate_buckets_lru(), a hot path in bcache. Before the
cache is fully populated, new_bucket_prio() often returns zero, leading to
many equal comparisons. In such cases, bottom-up sift_down performs up to
2 * log2(n) comparisons, while the original top-down approach completes
with just O() comparisons, resulting in a measurable performance gap.
The performance degradation is further worsened by the non-inlined
min_heap API functions introduced in commit 92a8b224b833 ("lib/min_heap:
introduce non-inline versions of min heap API functions"), adding function
call overhead to this critical path.
As reported by Robert, bcache now suffers from latency spikes, with P100
(max) latency increasing from 600 ms to 2.4 seconds every 5 minutes.
These regressions degrade bcache's effectiveness as a low-latency cache
layer and lead to frequent timeouts and application stalls in production
environments.
This revert aims to restore bcache's original low-latency behavior.
Link: https://lore.kernel.org/lkml/CAJhEC05+0S69z+3+FB2Cd0hD+pCRyWTKLEOsc8BOmH73p1m+KQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20250614202353.1632957-3-visitorckw@gmail.com
Fixes: 866898efbb25 ("bcache: remove heap-related macros and switch to generic min_heap")
Fixes: 92a8b224b833 ("lib/min_heap: introduce non-inline versions of min heap API functions")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reported-by: Robert Pang <robertpang@google.com>
Closes: https://lore.kernel.org/linux-bcache/CAJhEC06F_AtrPgw2-7CvCqZgeStgCtitbD-ryuPpXQA-JG5XXw@mail.gmail.com
Acked-by: Coly Li <colyli@kernel.org>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "bcache: Revert min_heap migration due to performance
regression".
This patch series reverts the migration of bcache from its original heap
implementation to the generic min_heap library. While the original change
aimed to simplify the code and improve maintainability, it introduced a
severe performance regression in real-world scenarios.
As reported by Robert, systems using bcache now suffer from periodic
latency spikes, with P100 (max) latency increasing from 600 ms to 2.4
seconds every 5 minutes. This degrades bcache's value as a low-latency
caching layer, and leads to frequent timeouts and application stalls in
production environments.
The primary cause of this regression is the behavior of the generic
min_heap implementation's bottom-up sift_down, which performs up to 2 *
log2(n) comparisons when many elements are equal. The original top-down
variant used by bcache only required O(1) comparisons in such cases. The
issue was further exacerbated by commit 92a8b224b833 ("lib/min_heap:
introduce non-inline versions of min heap API functions"), which
introduced non-inlined versions of the min_heap API, adding function call
overhead to a performance-critical hot path.
This patch (of 3):
This reverts commit 3d8a9a1c35227c3f1b0bd132c9f0a80dbda07b65.
Although removing the custom swap function simplified the code, this
change is part of a broader migration to the generic min_heap API that
introduced significant performance regressions in bcache.
As reported by Robert, bcache now suffers from latency spikes, with P100
(max) latency increasing from 600 ms to 2.4 seconds every 5 minutes.
These regressions degrade bcache's effectiveness as a low-latency cache
layer and lead to frequent timeouts and application stalls in production
environments.
This revert is part of a series of changes to restore previous performance
by undoing the min_heap transition.
Link: https://lkml.kernel.org/r/20250614202353.1632957-1-visitorckw@gmail.com
Link: https://lore.kernel.org/lkml/CAJhEC05+0S69z+3+FB2Cd0hD+pCRyWTKLEOsc8BOmH73p1m+KQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20250614202353.1632957-2-visitorckw@gmail.com
Fixes: 866898efbb25 ("bcache: remove heap-related macros and switch to generic min_heap")
Fixes: 92a8b224b833 ("lib/min_heap: introduce non-inline versions of min heap API functions")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reported-by: Robert Pang <robertpang@google.com>
Closes: https://lore.kernel.org/linux-bcache/CAJhEC06F_AtrPgw2-7CvCqZgeStgCtitbD-ryuPpXQA-JG5XXw@mail.gmail.com
Acked-by: Coly Li <colyli@kernel.org>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If CONFIG_UPROBES is not set, a merge subtest fails:
Failure log:
7151 12:46:54.627936 # # # RUN merge.handle_uprobe_upon_merged_vma ...
7152 12:46:54.639014 # # f /sys/bus/event_source/devices/uprobe/type
7153 12:46:54.639306 # # fopen: No such file or directory
7154 12:46:54.650451 # # # merge.c:473:handle_uprobe_upon_merged_vma:Expected read_sysfs("/sys/bus/event_source/devices/uprobe/type", &type) (1) == 0 (0)
7155 12:46:54.650730 # # # handle_uprobe_upon_merged_vma: Test terminated by assertion
7156 12:46:54.661750 # # # FAIL merge.handle_uprobe_upon_merged_vma
7157 12:46:54.662030 # # not ok 8 merge.handle_uprobe_upon_merged_vma
CONFIG_UPROBES is enabled by CONFIG_UPROBE_EVENTS, which gets enabled by
CONFIG_FTRACE. Therefore add these configs to selftests/mm/config so that
CI systems can include this config in the kernel build. To be completely
safe, add CONFIG_PROFILING too, to enable the dependency chain
PROFILING -> PERF_EVENTS -> UPROBE_EVENTS -> UPROBES.
Link: https://lkml.kernel.org/r/20250613034912.53791-1-dev.jain@arm.com
Fixes: efe99fabeb11 ("selftests/mm: add test about uprobe pte be orphan during vma merge")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reported-by: Aishwarya <aishwarya.tcv@arm.com>
Closes: https://lore.kernel.org/all/20250610103729.72440-1-aishwarya.tcv@arm.com/
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Tested-by : Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Pu Lehui <pulehui@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
