| Age | Commit message (Collapse) | Author |
|---|
|
This patch add quirk for Acer Aspire E-572:
- fix external mic
- limit mic boost for internal mic with maximal noise level of -24dB
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and EFI fixes from Peter Anvin:
"Half of these are EFI-related:
The by far biggest change is the change to hold off the deletion of a
sysfs entry while a backend scan is in progress. This is to avoid
calling kmemdup() while under a spinlock.
The other major change is for each entry in the EFI pstore backend to
get a unique identifier, as required by the pstore filesystem proper.
The other changes are:
A fix to the recent consolidation and optimization of using "asm goto"
with read-modify-write operation, which broke the bitops; specifically
in such a way that we could end up generating invalid code.
A build hack to make sure we compile with -mno-sse. icc, and most
likely future versions of gcc, can generate SSE instructions unless we
tell it not to.
A comment-only patch to a change the was due in part to an unpublished
erratum; now when the erratum is published we want to add a comment
explaining why"
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic, doc: Justification for disabling IO APIC before Local APIC
x86, bitops: Correct the assembly constraints to testing bitops
x86-64, build: Always pass in -mno-sse
efi-pstore: Make efi-pstore return a unique id
x86/efi: Fix earlyprintk off-by-one bug
efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is completed
|
|
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=60772
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Leho Kraav <leho@kraav.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since erratum AVR31 in "Intel Atom Processor C2000 Product Family
Specification Update" is now published, I added a justification
comment for disabling IO APIC before Local APIC, as changed in commit:
522e66464467 x86/apic: Disable I/O APIC before shutdown of the local APIC
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1386202069-51515-1-git-send-email-fenghua.yu@intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
|
According to the virtio spec, the device configuration field
that should be updated after an inflation or deflation
operation is the 'actual' field, not the 'num_pages' one.
Commit 855e0c5288177bcb193f6f6316952d2490478e1c swapped them
in update_balloon_size(). Fix it.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: 855e0c5288177bcb193f6f6316952d2490478e1c
|
|
into drm-fixes
Some additional fixes for 3.13. Regression fixes for audio and hw_i2c,
vram fix for some SI PX cards, race fix in the hwmon code, and a few other
odds and ends.
* 'drm-fixes-3.13' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/atom: fix bus probes when hw_i2c is set (v2)
drm/radeon: fix null pointer dereference in dce6+ audio code
drm/radeon: fixup bad vram size on SI
drm/radeon: fix VGT_GS_INSTANCE_CNT register
drm/radeon: Fix a typo in Cayman and Evergreen registers
drm/radeon/dpm: simplify state adjust logic for NI
drm/radeon: add radeon_vm_bo_update trace point
drm/radeon: add VMID allocation trace point
drm/radeon/dpm: Convert to use devm_hwmon_register_with_groups
drm/radeon: program DCE2 audio dto just like DCE3
drm/radeon: fix typo in fetching mpll params
|
|
As per the documentation of powercap sysfs, energy_uj field is read only,
if it can't be reset. Currently it always allows write but will fail,
if there is no reset callback.
Changing mode field, to read only if there is no reset callback.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reported-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On returning from hibernation 'restore' callback is called,
not 'resume'. Fix it.
Fixes: eaf140b60ec9 (PNP: convert PNP driver bus legacy pm_ops to dev_pm_ops)
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: 3.12+ <stable@vger.kernel.org> # 3.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Ensure the side-by-side (half) flag is added to any existing flags when
adding modes from 3D_Structure_ALL.
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Signed-off-by: Thomas Wood <thomas.wood@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This patch adds a check for USB_STATE_NOTATTACHED to the
hub_port_warm_reset_required() workaround for ports that end up in
Compliance Mode in hub_events() when trying to decide which reset
function to use. Trying to call usb_reset_device() with a NOTATTACHED
device will just fail and leave the port broken.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Include linux/dma-mapping.h to make the new functions available that are
used since 22d9d8e83 ("DMA-API: usb: use dma_set_coherent_mask()").
drivers/usb/host/ohci-pxa27x.c: In function ‘ohci_pxa_of_init’:
drivers/usb/host/ohci-pxa27x.c:310:2: error: implicit declaration of function ‘dma_coerce_mask_and_coherent’ [-Werror=implicit-function-declaration]
drivers/usb/host/ohci-pxa27x.c:310:2: error: implicit declaration of function ‘DMA_BIT_MASK’ [-Werror=implicit-function-declaration]
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When probing the bus, we need to set the byte count
to 0 rather than 1.
v2: Don't count the first byte.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=66241
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Don't crash if the encoder does not have an afmt struct.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72283
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Some boards seem to have garbage in the upper
16 bits of the vram size register. Check for
this and clamp the size properly. Fixes
boards reporting bogus amounts of vram.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Signed-off-by: David Cluytens <david.cluytens@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Just flushing out my pile of bugfixes, most of them for regressions/cc:
stable. Nothing really serious going on.
For outstanding issues we still have the S4 fun due to the hsw S4
duct-tape pending (seems like I need to switch into angry maintainer mode
on that one). And there's the mode merging revert to make my g33 work
again still pending for drm core. For that one I don't have any more clue
(and it looks like no one else has a good idea either). And apparently the
locking WARN fix in here also needs to be replicated for boot, still
confirming that one though.
* tag 'drm-intel-fixes-2013-12-02' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: Pin pages whilst allocating for dma-buf vmap()
drm/i915: MI_PREDICATE_RESULT_2 is HSW only
drm/i915: Make the DERRMR SRM target global GTT
drm/i915: use the correct force_wake function at the PC8 code
drm/i915: Fix pipe CSC post offset calculation
drm/i915: Simplify DP vs. eDP detection
drm/i915: Check VBT for eDP ports on VLV
drm/i915: use crtc_htotal in watermark calculations to match fastboot v2
drm/i915: Pin relocations for the duration of constructing the execbuffer
drm/i915: take mode config lock around crtc disable at suspend
drm/i915: Prefer setting PTE cache age to 3
drm/i915/ddi: set sink to power down mode on dp disable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
two outstanding exynos fixes
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: release unhandled page flip events at postclose.
drm/exynos: Fix trivial typo in exynos_drm_fimd.c
|
|
into drm-fixes
drm/tegra: Fixes for v3.13-rc3
This assortment of patches fix a few build and sparse warnings and make
sure to always return -EFAULT on copy_from_user() failures. Finally the
upcasting from struct drm_crtc to struct tegra_dc is made safer to
prevent potential segmentation faults.
* tag 'drm/for-3.13-rc3' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: return -EFAULT if copy_from_user() fails
gpu: host1x: Fix a few sparse warnings
drm/tegra: Force cast to __iomem to make sparse happy
drm/tegra: Make tegra_drm_driver static
drm/tegra: Fix address space mismatches
drm/tegra: Tightly bind RGB output to DC
drm/tegra: Make CRTC upcasting safer
gpu: host1x: Silence a few warnings with LPAE=y
|
|
5dc9e1e8 was a bit over-ambitious, and accidentially removed handling
for imported prime buffers.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Fix some pageflip, oopses and some better clock support for some chipsets
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nv50/disp: min/max are reversed in nv50_crtc_gamma_set()
drm/nouveau/sw: fix oops if gpu has its display block disabled
drm/nouveau: unreference fence after syncing
drm/nouveau/kms: send timestamp data for correct head in flip completion events
drm/nouveau/clk: Add support for NVAA/NVAC
drm/nouveau/fifo: Hook up pause and resume for NV50 and NV84+
drm/nv10/plane: some chipsets don't support NV12
drm/nv10/plane: add downscaling restrictions
drm/nv10/plane: fix format computation
drm/nv04-nv30/clk: provide an empty domain list
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of fixes. The biggest thing is the DMA buffer accounting that was
incorrect.
* 'vmwgfx-fixes-3.13' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Add our connectors to sysfs
drm/vmwgfx: Fix dma buffer memory size accounting
drm/vmwgfx: Fix up and comment the dumb buffer implementation
drm/vmwgfx: Correctly set the enabled state on crtcs
|
|
Reproduce:
ray@hr-bak:~/usb$ make -C tools/usb/
make: Entering directory `/home/ray/usb/tools/usb'
gcc -Wall -Wextra -g -lpthread -I../include -o testusb testusb.c
/tmp/cc0EMxfy.o: In function `main':
/home/ray/usb/tools/usb/testusb.c:508: undefined reference to `pthread_create'
/home/ray/usb/tools/usb/testusb.c:531: undefined reference to `pthread_join'
collect2: error: ld returned 1 exit status
make: *** [testusb] Error 1
make: Leaving directory `/home/ray/usb/tools/usb'
Comments:
In the latest version (4.7.3) of gcc compiler, it requres that
libraries must follow the object or source files like below:
"gcc hello.c -lpthread" instead of "gcc -lpthread hello.c"
And it isn't encountered at gcc version 4.7.2.
So this patch fix to move the pthread option after testusb.c.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In checkin:
0c44c2d0f459 x86: Use asm goto to implement better modify_and_test() functions
the various functions which do modify and test were unified and
optimized using "asm goto". However, this change missed the detail
that the bitops require an "Ir" constraint rather than an "er"
constraint ("I" = integer constant from 0-31, "e" = signed 32-bit
integer constant). This would cause code to miscompile if these
functions were used on constant bit positions 32-255 and the build to
fail if used on constant bit positions above 255.
Add the constraints as a parameter to the GEN_BINARY_RMWcc() macro to
avoid this problem.
Reported-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/529E8719.4070202@zytor.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
From Sekhar Nori:
This pull request includes a patch
to align platform code to driver's
usage of platform_get_resource_byname()
This is needed to start successfully probing
audio again. The regression was introduced
in v3.13 merge window.
* tag 'davinci-fixes-for-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: Fix McASP mem resource names
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The ASoC McASP driver looks for the mem resources by name
"mpu" and "dat" regions.
Change/add the needed name for the mem resources so the driver can pick the
correct resource.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Free 'ctx_str' when necessary.
Signed-off-by: Geyslan G. Bem <geyslan@gmail.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
From Sekhar Nori:
This pull request contains a fixe for broken unbanked
GPIO IRQ support and a fix for some random memory
corruption. The bugs were introduced during v3.13
merge window.
* tag 'davinci-fixes-for-v3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: fix number of resources passed to davinci_gpio_register()
gpio: davinci: fix check for unbanked gpio
|
|
Some user-space apps expects to find them there.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
Also request kernel ttm_buffer objects for buffer objects that obviously
aren't visible to user-space, and save some device address space.
The accounting was broken in a couple of ways:
1) We did not differentiate between user dma buffers and kernel dma buffers.
2) The ttm_bo_acc_size function is broken in that it
a) Doesn't take into account the size of the optional dma address array,
b) Doesn't take into account the fact that drivers typically embed the
ttm_tt structure.
This needs to be fixed in ttm, but meanwhile provide a vmwgfx-specific
function to do the job.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
Allocation was duplicating code. Comments were missing.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
Failure to do this would make the drm_mode_get_crtc ioctl return
without crtc mode info, indicating that no mode was set.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
|
|
Adding is_writable_pte print helper function, so the
kvmmmu:fast_page_fault print format gets resolved properly.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'kvm:*,kvmmmu:*' -a')
--- script.kvm.old
+++ script.kvm.new
- qemu-system-x86 3290 [002] 10708.755312: kvmmmu:fast_page_fault: [FAILED TO PARSE] vcpu_id=0 gva=4094486080 error_code=3 sptep=0xffff88019f1e3670 old_spte=336391285 new_spte=336391287 retry=1
+ qemu-system-x86 3290 [002] 10708.755312: kvmmmu:fast_page_fault: vcpu 0 gva f40ce640 error_code P|W sptep 0xffff88019f1e3670 old 0x140cec75 new 140cec77 spurious 0 fixed 1
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-28-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Removing malloc_or_die calls from plugin_function.c, replacing them and
factoring the code with standard realloc and error path.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-27-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Several cleanups suggested by Namhyung:
* Remove index field from struct func_stack as it's not needed.
* Rename get_index into add_and_get_index.
* Use '%*X' format string capability instead of the loop
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-26-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The pevent_print_func_field function encompasses all the functionality
used in the hrtimer_start handler. Change the handler to use this
function.
This also unifies the function field output with the
hrtimer_expire_entry handler.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-25-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's no need for following functions to be global:
process_jbd2_dev_to_name
process_jiffies_to_msecs
Make them static.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-24-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Removing malloc_or_die calls from event-plugin.c,
replacing them with standard malloc and error path.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-23-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding cfg80211 plugin.
This plugin adds handler for __le16_to_cpup function
t properly parse following tracepoint events:
cfg80211:cfg80211_tx_mlme_mgmt
cfg80211:cfg80211_rx_mlme_mgmt
cfg80211:cfg80211_rx_unprot_mlme_mgmt
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'cfg80211:*' -a')
--- script.cfg80211.old
+++ script.cfg80211.new
- ifconfig 2705 [003] 662.896560: cfg80211:cfg80211_tx_mlme_mgmt: [FAILED TO PARSE] name=wlan0 ifindex=3 frame=ARRAY[c0, 00, 00, 00, 00, 3a, 98, a0, 30, 51, 10, 0b, a9, c6, f4, 74, 00, 3a, 98, a0, 30, 51, 00, 00, 03, 00]
+ ifconfig 2705 [003] 662.896560: cfg80211:cfg80211_tx_mlme_mgmt: netdev:wlan0(3), ftype:0xc0
- kworker/u16:0 1697 [002] 664.808210: cfg80211:cfg80211_rx_mlme_mgmt: [FAILED TO PARSE] name=wlan0 ifindex=3 frame=ARRAY[b0, 00, da, 00, 10, 0b, a9, c6, f4, 74, d8, 24, bd, a1, 26, 31, d8, 24, bd, a1, 26, 31, 10, b7, 00, 00, 02, 00, 00, 00]
+ kworker/u16:0 1697 [002] 664.808210: cfg80211:cfg80211_rx_mlme_mgmt: netdev:wlan0(3), ftype:0xb0
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-22-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding scsi plugin.
This plugin adds fields resolving functions for following tracepoint
events:
scsi:scsi_dispatch_cmd_start
scsi:scsi_dispatch_cmd_error
scsi:scsi_dispatch_cmd_done
scsi:scsi_dispatch_cmd_timeout
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'scsi:scsi_dispatch_cmd*' -a)
- swapper 0 [000] 6620.491019: scsi:scsi_dispatch_cmd_done: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 result=0 opcode=53 cmd_len=10 data_sglen=0 prot_sglen=0 prot_op=0 cmnd=5
+ swapper 0 [000] 6620.491019: scsi:scsi_dispatch_cmd_done: host_no=0 channel=0 id=0 lun=0 data_sgl=0 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(SYNCHRONIZE_CACHE - raw=35 00 00 00 00 00 00 00 00 00) result=(driver=DRIVER_OK host=DID_OK message=COMMAND_COMPLETE status=SAM_STAT_GOOD)
- kworker/0:0 21554 [000] 6620.491126: scsi:scsi_dispatch_cmd_start: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 opcode=42 cmd_len=10 data_sglen=1 prot_sglen=0 prot_op=0 cmnd=*
+ kworker/0:0 21554 [000] 6620.491126: scsi:scsi_dispatch_cmd_start: host_no=0 channel=0 id=0 lun=0 data_sgl=1 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(WRITE_10 lba=570899168 txlen=8 protect=0 raw=2a 00 22 07 3a e0 00 00 08 00)
- jbd2/dm-3-8 593 [002] 6621.607992: scsi:scsi_dispatch_cmd_error: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 rtn=4182 opcode=53 cmd_len=10 data_sglen=0 prot_sglen=0 prot_op=0 cmnd=5
+ jbd2/dm-3-8 593 [002] 6621.607992: scsi:scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=0 data_sgl=0 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(SYNCHRONIZE_CACHE - raw=35 00 00 00 00 00 00 00 00 00) rtn=4182
NOTE I couldn't generate scsi_dispatch_cmd_timeout tracepoint,
but it's similar to the rest, so I believe it's ok.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-21-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding xen plugin.
This plugin adds fields resolving for following tracepoint events:
xen:xen_mc_entry
xen:xen_mc_extend_args
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'xen:*' ls')
--- script.xen.old
+++ script.xen.new
- swapper 0 [002] 136.267492: xen:xen_mc_entry: [FAILED TO PARSE] op=3 nargs=2 args=ARRAY[18, 00, 00, 00, 00, 00, 00, 00, 00, e0, d4, 4b, 04, 88, ff, ff, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00]
+ swapper 0 [002] 136.267492: xen:xen_mc_entry: op 3(stack_switch) args [18, 0, 0, 0, 0, 0]
- perf 1970 [008] 136.273319: xen:xen_mc_extend_args: [FAILED TO PARSE] op=1 args=16 res=1
+ perf 1970 [008] 136.273319: xen:xen_mc_extend_args: extending op 1(mmu_update) by 16 bytes res ???
NOTE We still do not handle the 'sizeof' and fail to parse following xen
tracepoints:
xen:xen_mmu_set_pte
xen:xen_mmu_set_pte_atomic
xen:xen_mmu_set_domain_pte
xen:xen_mmu_set_pte_at
xen:xen_mmu_set_pmd
xen:xen_mmu_set_pud
xen:xen_mmu_set_pgd
xen:xen_mmu_ptep_modify_prot_start
xen:xen_mmu_ptep_modify_prot_commit
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-20-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Backporting function plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds function and parent function fields resolving for
ftrace:function tracepoint event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e ftrace:function ls')
--- script.function.old
+++ script.function.new
- ls 10781 [001] 32667.291379: ftrace:function: ffffffff811adb80 <-- ffffffff811afc48
- ls 10781 [001] 32667.291379: ftrace:function: ffffffff811b35d0 <-- ffffffff811adb9b
- ls 10781 [001] 32667.291380: ftrace:function: ffffffff811b3520 <-- ffffffff811b35e8
- ls 10781 [001] 32667.291380: ftrace:function: ffffffff811b2720 <-- ffffffff811b3549
- ls 10781 [001] 32667.291381: ftrace:function: ffffffff81297e10 <-- ffffffff811b356c
- ls 10781 [001] 32667.291381: ftrace:function: ffffffff81298f40 <-- ffffffff81297e2c
- ls 10781 [001] 32667.291382: ftrace:function: ffffffff81076160 <-- ffffffff811afbf0
- ls 10781 [001] 32667.291383: ftrace:function: ffffffff811c3eb0 <-- ffffffff811afbfc
- ls 10781 [001] 32667.291383: ftrace:function: ffffffff8164e100 <-- ffffffff811c3ed8
- ls 10781 [001] 32667.291384: ftrace:function: ffffffff811a5d10 <-- ffffffff811c3f53
- ls 10781 [001] 32667.291384: ftrace:function: ffffffff811e8e70 <-- ffffffff811a5d58
- ls 10781 [001] 32667.291385: ftrace:function: ffffffff811f38e0 <-- ffffffff811a5d63
- ls 10781 [001] 32667.291385: ftrace:function: ffffffff811a9ff0 <-- ffffffff811a5d6b
- ls 10781 [001] 32667.291386: ftrace:function: ffffffff811a9fa0 <-- ffffffff811aa015
- ls 10781 [001] 32667.291387: ftrace:function: ffffffff810851c0 <-- ffffffff811aa053
- ls 10781 [001] 32667.291387: ftrace:function: ffffffff81090e00 <-- ffffffff81085211
+ ls 10781 [001] 32667.291379: ftrace:function: would_dump <-- setup_new_exec
+ ls 10781 [001] 32667.291379: ftrace:function: inode_permission <-- would_dump
+ ls 10781 [001] 32667.291380: ftrace:function: __inode_permission <-- inode_permission
+ ls 10781 [001] 32667.291380: ftrace:function: generic_permission <-- __inode_permission
+ ls 10781 [001] 32667.291381: ftrace:function: security_inode_permission <-- __inode_permission
+ ls 10781 [001] 32667.291381: ftrace:function: cap_inode_permission <-- security_inode_permission
+ ls 10781 [001] 32667.291382: ftrace:function: flush_signal_handlers <-- setup_new_exec
+ ls 10781 [001] 32667.291383: ftrace:function: do_close_on_exec <-- setup_new_exec
+ ls 10781 [001] 32667.291383: ftrace:function: _raw_spin_lock <-- do_close_on_exec
+ ls 10781 [001] 32667.291384: ftrace:function: filp_close <-- do_close_on_exec
+ ls 10781 [001] 32667.291384: ftrace:function: dnotify_flush <-- filp_close
+ ls 10781 [001] 32667.291385: ftrace:function: locks_remove_posix <-- filp_close
+ ls 10781 [001] 32667.291385: ftrace:function: fput <-- filp_close
+ ls 10781 [001] 32667.291386: ftrace:function: file_sb_list_del <-- fput
+ ls 10781 [001] 32667.291387: ftrace:function: task_work_add <-- fput
+ ls 10781 [001] 32667.291387: ftrace:function: kick_process <-- task_work_add
Removing options support as it's not backported yet.
Currently this plugin supports 2 options:
'parent' to display parent function
'indent' to show function call indents
Enabling both of them by default.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-19-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Backporting sched_switch plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds fields resolving for sched:sched_switch tracepoint
event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e sched:sched_switch -a')
--- script.sched_switch.old
+++ script.sched_switch.new
- perf 577 [002] 30965.311852: sched:sched_switch: prev_comm=perf prev_pid=577 prev_prio=120 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120
+ perf 577 [002] 30965.311852: sched:sched_switch: perf:577 [120] S ==> swapper/2:0 [120]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-18-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Backporting mac80211 plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds changed field resolving for
mac80211:drv_bss_info_changed tracepoint event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'mac80211:drv_bss_info_changed' -a')
--- script.mac80211.old
+++ script.mac80211.new
- ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2) changed:0x309f
+ ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2)
+ assoc:0 aid:2 cts:0 shortpre:0 shortslot:0 dtimper:1
+ bcnint:102 assoc_cap:0x431 basic_rates:0xf enable_beacon:0
+ ht_operation_mode:0
Omitting the mac80211:drv_config tracepoint handling because the kernel
tracepoint changed its prototype and the plugin handler is no longer
working.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Backporting kvm plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds field resolving functions for following
tracepoint events:
kvm:kvm_exit
kvm:kvm_emulate_insn
kvm:kvm_nested_vmexit
kvm:kvm_nested_vmexit_inject
kvmmmu:kvm_mmu_get_page
kvmmmu:kvm_mmu_sync_page
kvmmmu:kvm_mmu_unsync_page
kvmmmu:kvm_mmu_zap_page
kvmmmu:kvm_mmu_prepare_zap_page
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'kvm:*,kvmmmu:*' -a')
--- script.kvm.old
+++ script.kvm.new
qemu-system-x86 17414 [000] 6868.995053: kvm:kvm_exit: reason EPT_VIOLATION rip 0xfff0 info 184 0
qemu-system-x86 17414 [000] 6868.995109: kvm:kvm_emulate_insn: f0000:c46b:e4 71 (real)
- qemu-system-x86 3006 [002] 10562.079422: kvmmmu:kvm_mmu_get_page: [FAILED TO PARSE] mmu_valid_gen=0x2 gfn=0 role=122884 root_count=0 unsync=0 created=1
+ qemu-system-x86 3006 [002] 10562.079422: kvmmmu:kvm_mmu_get_page: new sp gfn 0 0/4 q0 direct --- !pge !nxe root 0 sync
- qemu-system-x86 3006 [002] 10562.080502: kvmmmu:kvm_mmu_prepare_zap_page: [FAILED TO PARSE] mmu_valid_gen=0x2 gfn=0 role=122884 root_count=1 unsync=0
+ qemu-system-x86 3006 [002] 10562.080502: kvmmmu:kvm_mmu_prepare_zap_page: 0/4 q0 direct --- !pge !nxe root 1 sync
qemu-system-x86 3290 [002] 10708.755312: kvmmmu:fast_page_fault: [FAILED TO PARSE] vcpu_id=0 gva=4094486080 error_code=3 sptep=0xffff88019f1e3670 old_spte=336391285 new_spte=336391287 retry=1
- insmod 2576 [001] 781.731666: kvmmmu:kvm_mmu_sync_page: [FAILED TO PARSE] mmu_valid_gen=0x1 gfn=2 role=24624 root_count=10 unsync=1
+ insmod 2576 [001] 781.731666: kvmmmu:kvm_mmu_sync_page: 3/0 q0 --- !pge !nxe root 10 unsync
- insmod 2576 [001] 781.731668: kvmmmu:kvm_mmu_unsync_page: [FAILED TO PARSE] mmu_valid_gen=0x1 gfn=2 role=24624 root_count=10 unsync=1
+ insmod 2576 [001] 781.731668: kvmmmu:kvm_mmu_unsync_page: 3/0 q0 --- !pge !nxe root 10 unsync
Note:
- kvm_mmu_zap_page is replaced by kvm_mmu_prepare_zap_page
in current kernel, keeping it for backward compatibility
- some of the tracepoints keep the same output even with
the plugin handling: kvm:kvm_exit, kvm:kvm_emulate_insn
- the 'kvmmmu:fast_page_fault' is still broken because of
missing is_writable_pte function and is fixed in another patch
- ommited following tracepoints from backport because
the output was buggy
kvm:kvm_nested_vmexit
kvm:kvm_nested_vmexit_inject
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-16-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Backporting kmem plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds call_site field resolving for following tracepoint
events:
kmem:kfree
kmem:kmalloc
kmem:kmalloc_node
kmem:kmem_cache_alloc
kmem:kmem_cache_alloc_node
kmem:kmem_cache_free
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'kmem:*' -a')
--- script.kmem.old
+++ script.kmem.new
- perf 27846 [001] 29643.403319: kmem:kfree: call_site=ffffffff810e64f6 ptr=(nil)
+ perf 27846 [001] 29643.403238: kmem:kfree: (__audit_syscall_exit+0x1f6) call_site=ffffffff810e64f6 ptr=(nil)
- perf 27846 [001] 29643.403337: kmem:kmem_cache_alloc: call_site=ffffffff812ff0c5 ptr=0xffff88020e155630 bytes_req=560 bytes_alloc=568 gfp_flags=GFP_KERNEL
+ perf 27846 [001] 29643.403337: kmem:kmem_cache_alloc: (radix_tree_preload+0x35) call_site=ffffffff812ff0c5 ptr=0xffff88020e155630 bytes_req=560 bytes_alloc=568 gfp_flags=GFP_KERNEL
- perf 27846 [001] 29643.403342: kmem:kmem_cache_free: call_site=ffffffff8126ec61 ptr=0xffff88020dffe750
+ perf 27846 [001] 29643.403342: kmem:kmem_cache_free: (jbd2_journal_stop+0x221) call_site=ffffffff8126ec61 ptr=0xffff88020dffe750
- firefox 954 [000] 29643.445477: kmem:kmem_cache_alloc_node: call_site=ffffffff8153c64e ptr=0xffff8801cecb4000 bytes_req=256 bytes_alloc=256 gfp_flags=GFP_KERNEL|GFP_REPEAT node=-1
+ firefox 954 [000] 29643.445477: kmem:kmem_cache_alloc_node: (__alloc_skb+0x4e) call_site=ffffffff8153c64e ptr=0xffff8801cecb4000 bytes_req=256 bytes_alloc=256 gfp_flags=GFP_KERNEL|GFP_REPEAT node=-1
- perf 27846 [001] 29643.445510: kmem:kmalloc: call_site=ffffffff81250642 ptr=0xffff88020fd6c300 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_NOFS|GFP_ZERO
+ perf 27846 [001] 29643.445510: kmem:kmalloc: (ext4_ext_find_extent+0x362) call_site=ffffffff81250642 ptr=0xffff88020fd6c300 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_NOFS|GFP_ZERO
- X 888 [002] 29643.445546: kmem:kmalloc_node: call_site=ffffffff8153c67e ptr=0xffff880103828e00 bytes_req=384 bytes_alloc=512 gfp_flags=GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP_NOMEMALLOC node=-1
+ X 888 [002] 29643.445546: kmem:kmalloc_node: (__alloc_skb+0x7e) call_site=ffffffff8153c67e ptr=0xffff880103828e00 bytes_req=384 bytes_alloc=512 gfp_flags=GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP_NOMEMALLOC node=-1
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-15-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Backporting hrtimer plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds function field resolving for following tracepoint
events:
timer:hrtimer_expire_entry
timer:hrtimer_start
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'timer:hrtimer*' -a')
--- script.hrtimer.old
+++ script.hrtimer.new
- swapper 0 [000] 27405.519092: timer:hrtimer_start: [FAILED TO PARSE] hrtimer=0xffff88021e20e800 function=0xffffffff810c0e10 expires=27398383000000 softexpires=27398383000000
+ swapper 0 [000] 27405.519103: timer:hrtimer_start: hrtimer=0xffff88021e20e800 function=tick_sched_timer expires=27398383000000 softexpires=27398383000000
- swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: [FAILED TO PARSE] hrtimer=0xffff880211334058 now=27398294182491 function=0xffffffff81086f20
+ swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: hrtimer=0xffff880211334058 now=27398294182491 function=posix_timer_fn/0x0
Check the 'function' field is translated into the function name.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-14-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Backporting jbd2 plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD 0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds field resolving functions for following tracepoint
events:
jbd2:jbd2_checkpoint_stats
jbd2:jbd2_run_stats
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'jbd2:jbd2_run_stats,jbd2:jbd2_checkpoint_stats' -a')
--- script.jbd2.old
+++ script.jbd2.new
- jbd2/dm-3-8 576 [000] 2983.748423: jbd2:jbd2_checkpoint_stats: [FAILED TO PARSE] dev=265289731 tid=0x3f2bbb chp_time=0x0 forced_to_close=0 written=0 dropped=2
+ jbd2/dm-3-8 576 [000] 2983.748423: jbd2:jbd2_checkpoint_stats: dev 253,3 tid 4139963 chp_time 0 forced_to_close 0 written 0 dropped 2
- jbd2/dm-3-8 576 [000] 2983.852789: jbd2:jbd2_run_stats: [FAILED TO PARSE] dev=265289731 tid=0x3f2bc0 wait=0x0 request_delay=0x0 running=0x138d locked=0x0 flushing=0x0 logging=0x68 handle_count=2995 blocks=17 blocks_logged=18
+ jbd2/dm-3-8 576 [000] 2983.852789: jbd2:jbd2_run_stats: dev 253,3 tid 4139968 wait 0 request_delay 0 running 5005 locked 0 flushing 0 logging 104 handle_count 2995 blocks 17 blocks_logged 18
This plugin also adds jbd2_dev_to_name function, which was removed from
jdb2 tracepoints recently. Keeping it in for backward compatibility
reasons.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-13-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The traceevent lib uses pr_stat to display all standard info. It's
defined as __weak. Overloading it with perf version plugged into perf
output system logic.
Displaying the pr_stat stuff under '-v' option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In order to get the proper plugins processing we need to use full
trace-event interface when creating tracepoint events. So far we were
using shortcut to get the parsed format.
Moving current 'event_format__new' function into trace-event object as
'trace_event__tp_format'.
This function uses properly initialized global trace-event object,
ensuring proper plugins processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
