summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-09-10blk-mq: scale depth and rq map appropriate if low on memoryJens Axboe
If we are running in a kdump environment, resources are scarce. For some SCSI setups with a huge set of shared tags, we run out of memory allocating what the drivers is asking for. So implement a scale back logic to reduce the tag depth for those cases, allowing the driver to successfully load. We should extend this to detect low memory situations, and implement a sane fallback for those (1 queue, 64 tags, or something like that). Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-10x86/xen: don't copy bogus duplicate entries into kernel page tablesStefan Bader
When RANDOMIZE_BASE (KASLR) is enabled; or the sum of all loaded modules exceeds 512 MiB, then loading modules fails with a warning (and hence a vmalloc allocation failure) because the PTEs for the newly-allocated vmalloc address space are not zero. WARNING: CPU: 0 PID: 494 at linux/mm/vmalloc.c:128 vmap_page_range_noflush+0x2a1/0x360() This is caused by xen_setup_kernel_pagetables() copying level2_kernel_pgt into level2_fixmap_pgt, overwriting many non-present entries. Without KASLR, the normal kernel image size only covers the first half of level2_kernel_pgt and module space starts after that. L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[ 0..255]->kernel [256..511]->module [511]->level2_fixmap_pgt[ 0..505]->module This allows 512 MiB of of module vmalloc space to be used before having to use the corrupted level2_fixmap_pgt entries. With KASLR enabled, the kernel image uses the full PUD range of 1G and module space starts in the level2_fixmap_pgt. So basically: L4[511]->level3_kernel_pgt[510]->level2_kernel_pgt[0..511]->kernel [511]->level2_fixmap_pgt[0..505]->module And now no module vmalloc space can be used without using the corrupt level2_fixmap_pgt entries. Fix this by properly converting the level2_fixmap_pgt entries to MFNs, and setting level1_fixmap_pgt as read-only. A number of comments were also using the the wrong L3 offset for level2_kernel_pgt. These have been corrected. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org
2014-09-10MAINTAINERS: Tomasz has movedTomasz Figa
I am leaving Samsung, so my current e-mail address is not going to work any longer. Replace it with my private one. In addition, Sylwester Nawrocki is being added as co-maintainer for Samsung clock drivers to take some of the responsibilities, as I will be doing my part in my spare time. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-10pinctrl: baytrail: resolve unbalanced IRQ wake disable warningMathias Nyman
Add the IRQCHIP_SKIP_SET_WAKE flag to baytrail gpio irq_chip to resolve unbalaced IRQ wake disable warnings. Suggested-by: Borun Fu <borun.fu@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-10ASoC: soc-pcm: fix dpcm_path_get error handlingQiao Zhou
dpcm_path_get may return -ENOMEM when allocating memory for list fails. We should not keep processing path or start up dpcm dai in this case. Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-10regulator: remove unnecessary of_node_get() to parentGuodong Xu
These of_node_get() were added to balance refcount decrements inside of of_find_node_by_name(). See: commit c92f5dd2c42f ("regulator: Add missing of_node_put()") However of_find_node_by_name() was then replaced by of_get_child_by_name(), which doesn't call of_node_put() against its input parameter. So, need to remove these unnecessary of_node_get() calls. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-10rbd: fix error return code in rbd_dev_device_setup()Wei Yongjun
Fix to return -ENOMEM from the workqueue alloc error handling case instead of 0, as done elsewhere in this function. Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-09-10rbd: avoid format-security warning inside alloc_workqueue()Ilya Dryomov
drivers/block/rbd.c: In function ‘rbd_dev_device_setup’: drivers/block/rbd.c:5090:19: warning: format not a string literal and no format arguments [-Wformat-security] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-09-09RxRPC: Fix missing __user annotationDavid Howells
Fix a missing __user annotation in a cast of a user space pointer (found by checker). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09net:bonding: Add missing space in bonding driver parameter descriptionMasanari Iida
This patch adds missing space between "interface" and "by" in bonding module parameter description. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09net:socket: set msg_namelen to 0 if msg_name is passed as NULL in msghdr ↵Ani Sinha
struct from userland. Linux manpage for recvmsg and sendmsg calls does not explicitly mention setting msg_namelen to 0 when msg_name passed set as NULL. When developers don't set msg_namelen member in msghdr, it might contain garbage value which will fail the validation check and sendmsg and recvmsg calls from kernel will return EINVAL. This will break old binaries and any code for which there is no access to source code. To fix this, we set msg_namelen to 0 when msg_name is passed as NULL from userland. Signed-off-by: Ani Sinha <ani@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09Merge branch 'for-next-3.17' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs/smb3 fixes from Steve French: "This includes various cifs and smb3 bug fixes including those for bugs found with the recently updated xfstests. Also I am working fixes for two additional cifs problems found by xfstests which I plan to send later (when reviewed and run additional tests)" * 'for-next-3.17' of git://git.samba.org/sfrench/cifs-2.6: Clarify Kconfig help text for CIFS and SMB2/SMB3 CIFS: Fix wrong filename length for SMB2 CIFS: Fix wrong restart readdir for SMB1 CIFS: Fix directory rename error cifs: No need to send SIGKILL to demux_thread during umount cifs: Allow directIO read/write during cache=strict cifs: remove unneeded check of null checking in if condition cifs: fix a possible use of uninit variable in SMB2_sess_setup cifs: fix memory leak when password is supplied multiple times cifs: fix a possible null pointer deref in decode_ascii_ssetup Trivial whitespace fix
2014-09-09Input: synaptics - add support for ForcePadsDmitry Torokhov
ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: matrix_keypad - use request_any_context_irq()Lothar Waßmann
When trying to use the matrix-keypad driver with GPIO drivers that require nested irq handlers (e.g. I2C GPIO adapters like PCA9554), request_irq() fails because the GPIO driver requires a threaded interrupt handler. Use request_any_context_irq() to be able to use any GPIO driver as keypad driver. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: atmel_mxt_ts - downgrade warning about empty interruptsNick Dyer
In the case where the CHG/interrupt line mode is not configured correctly, this warning is output to dmesg output for each interrupt. Downgrade the message to debug. Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09Input: wm971x - fix typo in module parameter descriptionMasanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09clk/efm32gg: fix dt init prototypeUwe Kleine-König
Since commit 54196ccbe0ba (of: consolidate linker section OF match table declarations) which went into 3.16-rc1 the following compiler warning is generated: In file included from drivers/clk/clk-efm32gg.c:12:0: include/linux/of.h:772:20: warning: comparison of distinct pointer types lacks a cast [enabled by default] .data = (fn == (fn_type)NULL) ? fn : fn } ^ include/linux/of.h:785:3: note: in expansion of macro '_OF_DECLARE' _OF_DECLARE(table, name, compat, fn, of_init_fn_1) ^ include/linux/clk-provider.h:545:42: note: in expansion of macro 'OF_DECLARE_1' #define CLK_OF_DECLARE(name, compat, fn) OF_DECLARE_1(clk, name, compat, fn) ^ drivers/clk/clk-efm32gg.c:81:1: note: in expansion of macro 'CLK_OF_DECLARE' CLK_OF_DECLARE(efm32ggcmu, "efm32gg,cmu", efm32gg_cmu_init); ^ Fix it by making efm32gg_cmu_init return void. Cc: Rob Herring <robh@kernel.org> Reported-by: Bryan Hundven <bryanhundven@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-09ASoC: samsung-i2s: Check secondary DAI exists before referencingCharles Keepax
In a couple of places the driver is missing a check to ensure there is a secondary DAI before it de-references the pointer to it, causing a null pointer de-reference. This patch adds a check to avoid this. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-09-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2014-09-09Merge tag 'mac80211-for-john-2014-09-08' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg <johannes@sipsolutions.net> says: "Two more fixes for mac80211 - one of them addresses a long-standing issue that we only found when using vendor events more frequently; the other addresses some bad information being reported in userspace that people were starting to actually look at." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09Merge tag 'microblaze-3.17-rc5' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull arch/microblaze fixes from Michal Simek: - Kconfig menu structure fix - fix number of syscalls - fix compilation warnings from allmodconfig * tag 'microblaze-3.17-rc5' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix number of syscalls microblaze: Rename Advance setup to Kernel features microblaze: Add mm/Kconfig to advance menu arch/microblaze/include/asm/uaccess.h: Use pr_devel() instead of pr_debug() arch/microblaze/include/asm/entry.h: Include "linux/linkage.h" to avoid compiling issue
2014-09-09usb: dwc2/gadget: avoid disabling ep0Robert Baldyga
Endpoint 0 should not be disabled, so we start loop counter from number 1. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: delay enabling irq once hardware is configured properlyMarek Szyprowski
This patch fixes kernel panic/interrupt storm/etc issues if bootloader left s3c-hsotg module in enabled state. Now interrupt handler is enabled only after proper configuration of hardware registers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: do not call disconnect method in pullupMarek Szyprowski
This leads to potential spinlock recursion in composite framework, other udc drivers also don't call it directly from pullup method. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: break infinite loop in endpoint disable codeMarek Szyprowski
This patch fixes possible freeze caused by infinite loop in interrupt context. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: fix phy initialization sequenceKamil Debski
In the Generic PHY Framework a NULL phy is considered to be a valid phy thus the "if (hsotg->phy)" check does not give us the information whether the Generic PHY Framework is used. In addition to the above this patch also removes phy_init from probe and phy_exit from remove. This is not necessary when init/exit is done in the s3c_hsotg_phy_enable/disable functions. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09usb: dwc2/gadget: fix phy disable sequenceKamil Debski
When the driver is removed s3c_hsotg_phy_disable is called three times instead of once. This results in decreasing of the phy reference counter below zero and thus consecutive inserts of the module fails. This patch removes calls to s3c_hsotg_phy_disable from s3c_hsotg_remove and s3c_hsotg_udc_stop. s3c_hsotg_udc_stop is called from udc-core.c only after usb_gadget_disconnect, which in turn calls s3c_hsotg_pullup, which already calls s3c_hsotg_phy_disable. s3c_hsotg_remove must be called only after udc_stop, so there is no point in disabling phy once again there. Signed-off-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Cc: stable <stable@vger.kernel.org> # 3.16 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-09Block: fix unbalanced bypass-disable in blk_register_queueAlan Stern
When a queue is registered, the block layer turns off the bypass setting (because bypass is enabled when the queue is created). This doesn't work well for queues that are unregistered and then registered again; we get a WARNING because of the unbalanced calls to blk_queue_bypass_end(). This patch fixes the problem by making blk_register_queue() call blk_queue_bypass_end() only the first time the queue is registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Tejun Heo <tj@kernel.org> CC: James Bottomley <James.Bottomley@HansenPartnership.com> CC: Jens Axboe <axboe@kernel.dk> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-09drm/radeon/dpm: set the thermal type properly for special configsAlex Deucher
On systems with special thermal configurations make sure we make note of the thermal setup. This is required for proper firmware configuration on these systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-09-09spi/pl022: Fix error messageRoland Stigge
This patch fixes an error message typo ("not" missing). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-09Merge tag 'efi-urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: * Fix early boot regression affecting x86 EFI boot stub when loading initrds above 4GB - Yinghai Lu * Relocate GOT entries in the x86 EFI boot stub now that we have symbols with global visibility - Matt Fleming * fdt memory reservation fix for arm64 - Mark Salter Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09drm/radeon: reduce memory footprint for debuggingAndy Shevchenko
There is no need to use hex_dump_to_buffer() since we have a kernel helper to dump up to 64 bytes just via printk(). In our case the actual size is 15 bytes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-09-09ACPI / LPSS: complete PM entries for LPSS power domainFu Zhonghui
PM entries of LPSS power domain were not implemented correctly in commit c78b0830667a "ACPI / LPSS: custom power domain for LPSS". This patch fixes and completes these PM entries. Fixes: c78b0830667a (ACPI / LPSS: custom power domain for LPSS) Signed-off-by: Li Aubrey <aubrey.li@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Fu Zhonghui <zhonghui.fu@linux.intel.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09Revert "ACPI / battery: fix wrong value of capacity_now reported when fully ↵Bjørn Mork
charged" This reverts commit 232de5143790 ("ACPI / battery: fix wrong value of capacity_now reported when fully charged") There is nothing wrong or unexpected about 'capacity_now' increasing above the last 'full_charge_capacity' value. Different charging cycles will cause 'full_charge_capacity' to vary, both up and down. Good battery firmwares will update 'full_charge_capacity' when the current charging cycle is complete, increasing it if necessary. It might even go above 'design_capacity' on a fresh and healthy battery. Capping 'capacity_now' to 'full_charge_capacity' is plain wrong, and printing a warning if this doesn't happen to match the 'design_capacity' is both annoying and terribly wrong. This results in bogus warnings on perfectly working systems/firmwares: [Firmware Bug]: battery: reported current charge level (39800) is higher than reported maximum charge level (39800). and wrong values being reported for 'capacity_now' and 'full_charge_capacity' after the warning has been triggered. Fixes: 232de5143790 ("ACPI / battery: fix wrong value of capacity_now reported when fully charged") Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09Revert "ACPI / battery: Fix warning message in acpi_battery_get_state()"Bjørn Mork
This reverts commit d719870b41e0 ("ACPI / battery: Fix warning message in acpi_battery_get_state()") Capping 'capacity_now' to 'full_charge_capacity' is plain wrong. If this is necessary to work around some buggy firmware, then the workaround needs protection against being applied to working firmwares. Good battery firmwares will allow 'capacity_now' to increase above 'full_charge_capacity', and will update the latter when the battery is fully charged. By capping 'capacity_now' we lose accurate capacity reporting until charging is complete whenever 'full_charge_capacity' needs to be increased. Fixes: d719870b41e0 ("ACPI / battery: Fix warning message in acpi_battery_get_state()") Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-09microblaze: Fix number of syscallsMichal Simek
Number of syscalls have to be updated too. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09microblaze: Rename Advance setup to Kernel featuresMichal Simek
"Advance setup: menu is misleading that's why rename it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09microblaze: Add mm/Kconfig to advance menuMichal Simek
mm/Kconfig is getting too big to be in root menu. Move it to submenu. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09arch/microblaze/include/asm/uaccess.h: Use pr_devel() instead of pr_debug()Chen Gang
When DYNAMIC_DEBUG enabled, pr_debug() depends on KBUILD_MODNAME which also depends on the modules number in Makefile. The related information in "scripts/Makefile.lib" line 94: # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will # end up in (or would, if it gets compiled in) # Note: Files that end up in two or more modules are compiled without the # KBUILD_MODNAME definition. The reason is that any made-up name would # differ in different configs. For this case, 'radio-si470x-i2c.o' and 'radio-si470x-common.o' are in one line, so cause compiling issue. And 'uaccess.h' is a common shared header (not specially for drivers), so use pr_devel() instead of is OK. The related error with allmodconfig: CC [M] drivers/media/radio/si470x/radio-si470x-i2c.o CC [M] drivers/media/radio/si470x/radio-si470x-common.o In file included from include/linux/printk.h:257:0, from include/linux/kernel.h:13, from drivers/media/radio/si470x/radio-si470x.h:29, from drivers/media/radio/si470x/radio-si470x-common.c:115: ./arch/microblaze/include/asm/uaccess.h: In function 'access_ok': include/linux/dynamic_debug.h:66:14: error: 'KBUILD_MODNAME' undeclared (first use in this function) .modname = KBUILD_MODNAME, \ ^ include/linux/dynamic_debug.h:76:2: note: in expansion of macro 'DEFINE_DYNAMIC_DEBUG_METADATA' DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \ ^ include/linux/printk.h:263:2: note: in expansion of macro 'dynamic_pr_debug' dynamic_pr_debug(fmt, ##__VA_ARGS__) ^ ./arch/microblaze/include/asm/uaccess.h:101:3: note: in expansion of macro 'pr_debug' pr_debug("ACCESS fail: %s at 0x%08x (size 0x%x), seg 0x%08x\n", ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09arch/microblaze/include/asm/entry.h: Include "linux/linkage.h" to avoid ↵Chen Gang
compiling issue "entry.h" needs 'asmlinkage', and "asm/linkage.h" does not provide it. So need include "linux/linkage.h" to use generic one instead of. The related error (with allmodconfig under microblaze): CC [M] drivers/net/ethernet/emulex/benet/be_main.o In file included from ./arch/microblaze/include/asm/processor.h:17:0, from include/linux/prefetch.h:14, from drivers/net/ethernet/emulex/benet/be_main.c:18: ./arch/microblaze/include/asm/entry.h:33:19: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall); ^ Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09ASoC: Update email id of the authorRajeev Kumar
I moved from ST Microelectronics and so updating email-id to personal one. Signed-off-by: Rajeev Kumar <rajeevkumar.linux@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-09-09powerpc: Wire up sys_seccomp(), sys_getrandom() and sys_memfd_create()Pranith Kumar
This patch wires up three new syscalls for powerpc. The three new syscalls are seccomp, getrandom and memfd_create. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
2014-09-09powerpc: Make CONFIG_FHANDLE=y for all 64 bit powerpc defconfigsCyril Bur
CONFIG_FHANDLE is a requirement for systemd and with the increasing uptake of systemd within distros it makes sense for 64 bit defconfigs to include it. Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com>
2014-09-09powerpc: use machine_subsys_initcall() for opal_hmi_handler_init()Li Zhong
As opal_message_init() uses machine_early_initcall(powernv, ), and opal_hmi_handler_init() depends on that early initcall, so it also needs use machine_* to check the machine_id. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
2014-09-09powerpc/perf: Fix ABIv2 kernel backtracesAnton Blanchard
ABIv2 kernels are failing to backtrace through the kernel. An example: 39.30% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry __GI___libc_read The problem is in valid_next_sp() where we check that the new stack pointer is at least STACK_FRAME_OVERHEAD below the previous one. ABIv1 has a minimum stack frame size of 112 bytes consisting of 48 bytes and 64 bytes of parameter save area. ABIv2 changes that to 32 bytes with no paramter save area. STACK_FRAME_OVERHEAD is in theory the minimum stack frame size, but we over 240 uses of it, some of which assume that it includes space for the parameter area. We need to work through all our stack defines and rationalise them but let's fix perf now by creating STACK_FRAME_MIN_SIZE and using in valid_next_sp(). This fixes the issue: 30.64% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry pagecache_get_page generic_file_read_iter new_sync_read vfs_read sys_read syscall_exit __GI___libc_read Cc: stable@vger.kernel.org # 3.16+ Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org>
2014-09-09efi/arm64: Fix fdt-related memory reservationMark Salter
Commit 86c8b27a01cf: "arm64: ignore DT memreserve entries when booting in UEFI mode prevents early_init_fdt_scan_reserved_mem() from being called for arm64 kernels booting via UEFI. This was done because the kernel will use the UEFI memory map to determine reserved memory regions. That approach has problems in that early_init_fdt_scan_reserved_mem() also reserves the FDT itself and any node-specific reserved memory. By chance of some kernel configs, the FDT may be overwritten before it can be unflattened and the kernel will fail to boot. More subtle problems will result if the FDT has node specific reserved memory which is not really reserved. This patch has the UEFI stub remove the memory reserve map entries from the FDT as it does with the memory nodes. This allows early_init_fdt_scan_reserved_mem() to be called unconditionally so that the other needed reservations are made. Signed-off-by: Mark Salter <msalter@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-09-09x86/mm: Apply the section attribute to the variable, not its typeJan-Simon Möller
This fixes a compilation error in clang in that a linker section attribute can't be added to a type: arch/x86/mm/mmap.c:34:8: error: '__section__' attribute only applies to functions and global variables struct __read_mostly ... By moving the section attribute to the variable declaration, the desired effect is achieved. Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Behan Webster <behanw@converseincode.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1409959005-11479-1-git-send-email-behanw@converseincode.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09perf: Fix a race condition in perf_remove_from_context()Cong Wang
We saw a kernel soft lockup in perf_remove_from_context(), it looks like the `perf` process, when exiting, could not go out of the retry loop. Meanwhile, the target process was forking a child. So either the target process should execute the smp function call to deactive the event (if it was running) or it should do a context switch which deactives the event. It seems we optimize out a context switch in perf_event_context_sched_out(), and what's more important, we still test an obsolete task pointer when retrying, so no one actually would deactive that event in this situation. Fix it directly by reloading the task pointer in perf_remove_from_context(). This should cure the above soft lockup. Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1409696840-843-1-git-send-email-xiyou.wangcong@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-09powerpc/pseries: Fix endian issues in memory hotplugThomas Falcon
Values acquired from Open Firmware are in 32-bit big endian format and need to be handled on little endian architectures. This patch ensures values are in cpu endian when hotplugging memory. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
2014-09-08nfs: revert "nfs4: queue free_lock_state job submission to nfsiod"Jeff Layton
This reverts commit 49a4bda22e186c4d0eb07f4a36b5b1a378f9398d. Christoph reported an oops due to the above commit: generic/089 242s ...[ 2187.041239] general protection fault: 0000 [#1] SMP [ 2187.042899] Modules linked in: [ 2187.044000] CPU: 0 PID: 11913 Comm: kworker/0:1 Not tainted 3.16.0-rc6+ #1151 [ 2187.044287] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 2187.044287] Workqueue: nfsiod free_lock_state_work [ 2187.044287] task: ffff880072b50cd0 ti: ffff88007a4ec000 task.ti: ffff88007a4ec000 [ 2187.044287] RIP: 0010:[<ffffffff81361ca6>] [<ffffffff81361ca6>] free_lock_state_work+0x16/0x30 [ 2187.044287] RSP: 0018:ffff88007a4efd58 EFLAGS: 00010296 [ 2187.044287] RAX: 6b6b6b6b6b6b6b6b RBX: ffff88007a947ac0 RCX: 8000000000000000 [ 2187.044287] RDX: ffffffff826af9e0 RSI: ffff88007b093c00 RDI: ffff88007b093db8 [ 2187.044287] RBP: ffff88007a4efd58 R08: ffffffff832d3e10 R09: 000001c40efc0000 [ 2187.044287] R10: 0000000000000000 R11: 0000000000059e30 R12: ffff88007fc13240 [ 2187.044287] R13: ffff88007fc18b00 R14: ffff88007b093db8 R15: 0000000000000000 [ 2187.044287] FS: 0000000000000000(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 2187.044287] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 2187.044287] CR2: 00007f93ec33fb80 CR3: 0000000079dc2000 CR4: 00000000000006f0 [ 2187.044287] Stack: [ 2187.044287] ffff88007a4efdd8 ffffffff810cc877 ffffffff810cc80d ffff88007fc13258 [ 2187.044287] 000000007a947af0 0000000000000000 ffffffff8353ccc8 ffffffff82b6f3d0 [ 2187.044287] 0000000000000000 ffffffff82267679 ffff88007a4efdd8 ffff88007fc13240 [ 2187.044287] Call Trace: [ 2187.044287] [<ffffffff810cc877>] process_one_work+0x1c7/0x490 [ 2187.044287] [<ffffffff810cc80d>] ? process_one_work+0x15d/0x490 [ 2187.044287] [<ffffffff810cd569>] worker_thread+0x119/0x4f0 [ 2187.044287] [<ffffffff810fbbad>] ? trace_hardirqs_on+0xd/0x10 [ 2187.044287] [<ffffffff810cd450>] ? init_pwq+0x190/0x190 [ 2187.044287] [<ffffffff810d3c6f>] kthread+0xdf/0x100 [ 2187.044287] [<ffffffff810d3b90>] ? __init_kthread_worker+0x70/0x70 [ 2187.044287] [<ffffffff81d9873c>] ret_from_fork+0x7c/0xb0 [ 2187.044287] [<ffffffff810d3b90>] ? __init_kthread_worker+0x70/0x70 [ 2187.044287] Code: 0f 1f 44 00 00 31 c0 5d c3 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 8d b7 48 fe ff ff 48 8b 87 58 fe ff ff 48 89 e5 48 8b 40 30 <48> 8b 00 48 8b 10 48 89 c7 48 8b 92 90 03 00 00 ff 52 28 5d c3 [ 2187.044287] RIP [<ffffffff81361ca6>] free_lock_state_work+0x16/0x30 [ 2187.044287] RSP <ffff88007a4efd58> [ 2187.103626] ---[ end trace 0f11326d28e5d8fa ]--- The original reason for this patch was because the fl_release_private operation couldn't sleep. With commit ed9814d85810 (locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped), this is no longer a problem so we can revert this patch. Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
generated by cgit (git 2.34.1) at 2025-09-13 12:37:20 +0000