| Age | Commit message (Collapse) | Author |
|---|
|
Describe perisys-apb4-hclk as the APB clock for TH1520 SoC, which is
essential for accessing GMAC glue registers.
Fixes: 7e756671a664 ("riscv: dts: thead: Add TH1520 ethernet nodes")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-5-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It's necessary to adjust the MAC TX clock when the linkspeed changes,
but it's noted such adjustment always fails on TH1520 SoC, and reading
back from APB glue registers that control clock generation results in
garbage, causing broken link.
With some testing, it's found a clock must be ungated for access to APB
glue registers. Without any consumer, the clock is automatically
disabled during late kernel startup. Let's get and enable it if it's
described in devicetree.
For backward compatibility with older devicetrees, probing won't fail if
the APB clock isn't found. In this case, we emit a warning since the
link will break if the speed changes.
Fixes: 33a1a01e3afa ("net: stmmac: Add glue layer for T-HEAD TH1520 SoC")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-4-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Besides ones for GMAC core and peripheral registers, the TH1520 GMAC
requires one more clock for configuring APB glue registers. Describe
it in the binding.
Fixes: f920ce04c399 ("dt-bindings: net: Add T-HEAD dwmac support")
Signed-off-by: Yao Zi <ziyao@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Link: https://patch.msgid.link/20250808093655.48074-3-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, when a Secure TSC enabled SNP guest attempts to write to the
intercepted GUEST_TSC_FREQ MSR (a read-only MSR), the guest kernel response
incorrectly implies a VMM configuration error, when in fact it is the usual
VMM configuration to intercept writes to read-only MSRs, unless explicitly
documented.
Modify the intercepted TSC MSR #VC handling:
* Write to GUEST_TSC_FREQ will generate a #GP instead of terminating the
guest
* Write to MSR_IA32_TSC will generate a #GP instead of silently ignoring it
However, continue to terminate the guest when reading from intercepted
GUEST_TSC_FREQ MSR with Secure TSC enabled, as intercepted reads indicate an
improper VMM configuration for Secure TSC enabled SNP guests.
[ bp: simplify comment. ]
Fixes: 38cc6495cdec ("x86/sev: Prevent GUEST_TSC_FREQ MSR interception for Secure TSC enabled guests")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/20250722074853.22253-1-nikunj@amd.com
|
|
reset_gpio is claimed in mdiobus_register_device(), but it is not
released in mdiobus_unregister_device(). It is instead only
released when the whole MDIO bus is unregistered.
When a device uses the reset_gpio property, it becomes impossible
to unregister it and register it again, because the GPIO remains
claimed.
This patch resolves that issue.
Fixes: bafbdd527d56 ("phylib: Add device reset GPIO support") # see notes
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Cc: Csókás Bence <csokas.bence@prolan.hu>
[ csokas.bence: Resolve rebase conflict and clarify msg ]
Signed-off-by: Buday Csaba <buday.csaba@prolan.hu>
Link: https://patch.msgid.link/20250807135449.254254-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
TJA1103/04/20/21 support both C22 and C45 accessing methods.
The TJA11xx driver has implemented the match_phy_device() API.
However, it does not handle the C45 ID. If C45 was used to access
TJA11xx, match_phy_device() would always return false due to
phydev->phy_id only used by C22 being empty, resulting in the
generic phy driver being used for TJA11xx PHYs.
Therefore, check phydev->c45_ids.device_ids[MDIO_MMD_PMAPMD] when
using C45.
Fixes: 1b76b2497aba ("net: phy: nxp-c45-tja11xx: simplify .match_phy_device OP")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://patch.msgid.link/20250807040832.2455306-1-xiaoning.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
v2: Commit message updated
Bspec: 68927, 68934, 66624
Reported-by: Janna Martl <janna.martl109@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522
Fixes: 411ad63877bb ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards")
Tested-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com
(cherry picked from commit 46fb38cb20c0d185a6391ab524b23e0e0219c41f)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
As per the wa_18038517565, we need to disable FBC compressor
clock gating before enabling FBC and enable after disabling
FBC. Placing the enabling of clock gating in the fbc deactivate
function can make the above wa logic go wrong in case of
frontbuffer rendering FBC mechanism. FBC deactivate can get
called during fb invalidate and then the corresponding FBC
activate can get called without properly disabling the clock
gating and can result in compression stalled. So move the
enable clock gating at the end of one FBC session after FBC
is completely disabled for a pipe.
Bspec: 74212, 72197, 69741, 65555
Fixes: 010363c46189 ("drm/i915/display: implement wa_18038517565")
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250729124648.288497-1-vinod.govindapillai@intel.com
(cherry picked from commit 82dde0407ab126f8413fd6c51429e5057ced5ba2)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Otherwise it would display the virtual allocation size, which is often
much bigger than the RSS.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Fixes: e48ade5e23ba ("drm/panfrost: show device-wide list of DRM GEM objects over DebugFS")
Tested-by: Christopher Healy <healych@amazon.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250808010235.2831853-1-adrian.larumbe@collabora.com
|
|
The commit 65c66047259f ("proc: fix the issue of proc_mem_open returning
NULL") caused proc_maps_open() to return -ESRCH when proc_mem_open()
returns NULL. This breaks legitimate /proc/<pid>/maps access for kernel
threads since kernel threads have NULL mm_struct.
The regression causes perf to fail and exit when profiling a kernel
thread:
# perf record -v -g -p $(pgrep kswapd0)
...
couldn't open /proc/65/task/65/maps
This patch partially reverts the commit to fix it.
Link: https://lkml.kernel.org/r/20250807165455.73656-1-wjl.linux@gmail.com
Fixes: 65c66047259f ("proc: fix the issue of proc_mem_open returning NULL")
Signed-off-by: Jialin Wang <wjl.linux@gmail.com>
Cc: Penglei Jiang <superman.xpt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It was discovered in the attached report that commit f822a9a81a31 ("mm:
optimize mremap() by PTE batching") introduced a significant performance
regression on a number of metrics on x86-64, most notably
stress-ng.bigheap.realloc_calls_per_sec - indicating a 37.3% regression in
number of mremap() calls per second.
I was able to reproduce this locally on an intel x86-64 raptor lake
system, noting an average of 143,857 realloc calls/sec (with a stddev of
4,531 or 3.1%) prior to this patch being applied, and 81,503 afterwards
(stddev of 2,131 or 2.6%) - a 43.3% regression.
During testing I was able to determine that there was no meaningful
difference in efforts to optimise the folio_pte_batch() operation, nor
checking folio_test_large().
This is within expectation, as a regression this large is likely to
indicate we are accessing memory that is not yet in a cache line (and
perhaps may even cause a main memory fetch).
The expectation by those discussing this from the start was that
vm_normal_folio() (invoked by mremap_folio_pte_batch()) would likely be
the culprit due to having to retrieve memory from the vmemmap (which
mremap() page table moves does not otherwise do, meaning this is
inevitably cold memory).
I was able to definitively determine that this theory is indeed correct
and the cause of the issue.
The solution is to restore part of an approach previously discarded on
review, that is to invoke pte_batch_hint() which explicitly determines,
through reference to the PTE alone (thus no vmemmap lookup), what the PTE
batch size may be.
On platforms other than arm64 this is currently hardcoded to return 1, so
this naturally resolves the issue for x86-64, and for arm64 introduces
little to no overhead as the pte cache line will be hot.
With this patch applied, we move from 81,503 realloc calls/sec to 138,701
(stddev of 496.1 or 0.4%), which is a -3.6% regression, however accounting
for the variance in the original result, this is broadly restoring
performance to its prior state.
Link: https://lkml.kernel.org/r/20250807185819.199865-1-lorenzo.stoakes@oracle.com
Fixes: f822a9a81a31 ("mm: optimize mremap() by PTE batching")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202508071609.4e743d7c-lkp@intel.com
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When UFFDIO_MOVE encounters a migration PMD entry, it proceeds with
obtaining a folio and accessing it even though the entry is swp_entry_t.
Add the missing check and let split_huge_pmd() handle migration entries.
While at it also remove unnecessary folio check.
[surenb@google.com: remove extra folio check, per David]
Link: https://lkml.kernel.org/r/20250807200418.1963585-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250806220022.926763-1-surenb@google.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68794b5c.a70a0220.693ce.0050.GAE@google.com/
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit_anon_folio_batch(), we iterate over all pages pointed to by the
PTE batch. Therefore we need to know the first page of the batch;
currently we derive that via folio_page(folio, 0), but, that takes us to
the first (head) page of the folio instead - our PTE batch may lie in the
middle of the folio, leading to incorrectness.
Bite the bullet and throw away the micro-optimization of reusing the folio
in favour of code simplicity. Derive the page and the folio in
change_pte_range, and pass the page too to commit_anon_folio_batch to fix
the aforementioned issue.
Link: https://lkml.kernel.org/r/20250806145611.3962-1-dev.jain@arm.com
Fixes: cac1db8c3aad ("mm: optimize mprotect() by PTE batching")
Reported-by: syzbot+57bcc752f0df8bb1365c@syzkaller.appspotmail.com
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Debugged-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This change resolves non literal string format warning invoked for
proc-maps-race.c while compiling.
proc-maps-race.c:205:17: warning: format not a string literal and no format arguments [-Wformat-security]
205 | printf(text);
| ^~~~~~
proc-maps-race.c:209:17: warning: format not a string literal and no format arguments [-Wformat-security]
209 | printf(text);
| ^~~~~~
proc-maps-race.c: In function `print_last_lines':
proc-maps-race.c:224:9: warning: format not a string literal and no format arguments [-Wformat-security]
224 | printf(start);
| ^~~~~~
Add string format specifier %s for the printf calls in both
print_first_lines() and print_last_lines() thus resolving the warnings.
The test executes fine after this change thus causing no effect to the
functional behavior of the test.
Link: https://lkml.kernel.org/r/20250804225633.841777-1-hsukrut3@gmail.com
Fixes: aadc099c480f ("selftests/proc: add verbose mode for /proc/pid/maps tearing tests")
Signed-off-by: Sukrut Heroorkar <hsukrut3@gmail.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Hunter <david.hunter.linux@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since 'snprintf()' returns the number of characters emitted, an
output position may be advanced with this return value rather
than using an explicit calls to 'strlen()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
collect_sample() is used to gather samples of the data in a Write op for
analysis to try and determine if the compression algorithm is likely to
achieve anything more quickly than actually running the compression
algorithm.
However, collect_sample() assumes that the data it is going to be sampling
is stored in an ITER_XARRAY-type iterator (which it now should never be)
and doesn't actually check that it is before accessing the underlying
xarray directly.
Fix this by replacing the code with a loop that just uses the standard
iterator functions to sample every other 2KiB block, skipping the
intervening ones. It's not quite the same as the previous algorithm as it
doesn't necessarily align to the pages within an ordinary write from the
pagecache.
Note that the btrfs code from which this was derived samples the inode's
pagecache directly rather than the iterator - but that doesn't necessarily
work for network filesystems if O_DIRECT is in operation.
Fixes: 94ae8c3fee94 ("smb: client: compress: LZ77 code improvements cleanup")
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: Enzo Matsumiya <ematsumiya@suse.de>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
dwc_eth_dwmac_probe() gets bulk clocks, and then prepares and enables
them. Unfortunately, if dwc_eth_dwmac_config_dt() or stmmac_dvr_probe()
fail, we leave the clocks prepared and enabled. Fix this by using
devm_clk_bulk_get_all_enabled() to combine the steps and provide devm
based release of the prepare and enable state.
This also fixes a similar leakin dwc_eth_dwmac_remove() which wasn't
correctly retrieving the struct plat_stmmacenet_data. This becomes
unnecessary.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: a045e40645df ("net: stmmac: refactor clock management in EQoS driver")
Link: https://patch.msgid.link/E1ukM1X-0086qu-Td@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PHY clock (bsp_priv->clk_phy) is obtained using of_clk_get(), which
doesn't take part in the devm release. Therefore, when a device is
unbound, this clock needs to be explicitly put. Fix this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: fecd4d7eef8b ("net: stmmac: dwmac-rk: Add integrated PHY support")
Link: https://patch.msgid.link/E1ukM1S-0086qo-PC@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Kees points out, this is a kernel address leak, and debugging is
not a sufficiently good reason to expose the real kernel address.
Fixes: 65b584f53611 ("ref_tracker: automatically register a file in debugfs for a ref_tracker_dir")
Reported-by: Kees Cook <kees@kernel.org>
Closes: https://lore.kernel.org/netdev/202507301603.62E553F93@keescook/
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following Telit Cinterion FN990A w/audio composition:
0x1077: tty (diag) + adb + rmnet + audio + tty (AT/NMEA) + tty (AT) +
tty (AT) + tty (AT)
T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=1077 Rev=05.04
S: Manufacturer=Telit Wireless Solutions
S: Product=FN990
S: SerialNumber=67e04c35
C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio
I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E: Ad=03(O) Atr=0d(Isoc) MxPS= 68 Ivl=1ms
I: If#= 5 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio
E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms
I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Cc: stable@vger.kernel.org
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reviewer's email no longer works. Remove it from MAINTAINERS.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com>
Cc: Liu Haijun <haijun.liu@mediatek.com>
Cc: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Link: https://patch.msgid.link/20250808173925.FECE3782@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This maintainer's email no longer works. Remove it from MAINTAINERS.
Also mark the code as an Orphan.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20250808175324.8C4B7354@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This maintainer's email no longer works. Remove it from MAINTAINERS.
I've been unable to locate a new maintainer for this at Intel. Mark
the driver as Orphaned.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Loic Poulain <loic.poulain@oss.qualcomm.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20250808174505.C9FF434F@davehans-spike.ostc.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Problem
-------
With CONFIG_X86_DEBUG_FPU enabled, reading /proc/[kthread]/arch_status
causes a warning and a NULL pointer dereference.
This is because the AVX-512 timestamp code uses x86_task_fpu() but
doesn't check it for NULL. CONFIG_X86_DEBUG_FPU addles that function
for kernel threads (PF_KTHREAD specifically), making it return NULL.
The point of the warning was to ensure that kernel threads only access
task->fpu after going through kernel_fpu_begin()/_end(). Note: all
kernel tasks exposed in /proc have a valid task->fpu.
Solution
--------
One option is to silence the warning and check for NULL from
x86_task_fpu(). However, that warning is fairly fresh and seems like a
defense against misuse of the FPU state in kernel threads.
Instead, stop outputting AVX-512_elapsed_ms for kernel threads
altogether. The data was garbage anyway because avx512_timestamp is
only updated for user threads, not kernel threads.
If anyone ever wants to track kernel thread AVX-512 use, they can come
back later and do it properly, separate from this bug fix.
[ dhansen: mostly rewrite changelog ]
Fixes: 22aafe3bcb67 ("x86/fpu: Remove init_task FPU state dependencies, add debugging warning for PF_KTHREAD tasks")
Co-developed-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250811185044.2227268-1-sohil.mehta%40intel.com
|
|
Prevent intel_pstate from loading when OOB (Out Of Band) P-states mode is
enabled.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250808145122.4057208-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Marc has reported that commit 85975daeaa4d ("cpuidle: menu: Avoid
discarding useful information") caused the number of wakeup interrupts
to increase on an idle system [1], which was not expected to happen
after merely allowing shallower idle states to be selected by the
governor in some cases.
However, on the system in question, all of the idle states deeper than
WFI are rejected by the driver due to a firmware issue [2]. This causes
the governor to only consider the recent interval duriation data
corresponding to attempts to enter WFI that are successful and the
recent invervals table is filled with values lower than the scheduler
tick period. Consequently, the governor predicts an idle duration
below the scheduler tick period length and avoids stopping the tick
more often which leads to the observed symptom.
Address it by modifying the governor to update the recent intervals
table also when entering the previously selected idle state fails, so
it knows that the short idle intervals might have been the minority
had the selected idle states been actually entered every time.
Fixes: 85975daeaa4d ("cpuidle: menu: Avoid discarding useful information")
Link: https://lore.kernel.org/linux-pm/86o6sv6n94.wl-maz@kernel.org/ [1]
Link: https://lore.kernel.org/linux-pm/7ffcb716-9a1b-48c2-aaa4-469d0df7c792@arm.com/ [2]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Christian Loehle <christian.loehle@arm.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/2793874.mvXUDI8C0e@rafael.j.wysocki
|
|
There is no reason to limit intel_idle's loading of ACPI tables to
family 6. Upcoming Intel processors are not in family 6.
Below "Fixes" really means "applies cleanly until".
That syntax commit didn't change the previous logic,
but shows this patch applies back 5-years.
Fixes: 4a9f45a0533f ("intel_idle: Convert to new X86 CPU match macros")
Signed-off-by: Len Brown <len.brown@intel.com>
Link: https://patch.msgid.link/06101aa4fe784e5b0be1cb2c0bdd9afcf16bd9d4.1754681697.git.len.brown@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The symbol wb_window_usec cannot be found. Update the doc to reflect the
latest implementation, in other words, the debugfs interface
'curr_win_nsec'.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250727173959.160835-4-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the current implementation, the last_issue and last_comp members of
struct rq_wb are used only by read requests and not by non-throttled write
requests. Therefore, eliminate the ambiguity here.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250727173959.160835-3-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the current implementation, the sync_cookie and last_cookie members of
struct rq_wb are used only by read requests and not by non-throttled write
requests. Based on this, we can optimize wbt_done() by removing one if
condition check for non-throttled write requests.
Signed-off-by: Tang Yizhou <yizhou.tang@shopee.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250727173959.160835-2-yizhou.tang@shopee.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit cec199c5e39b ("futex: Implement FUTEX2_NUMA") introduced the
futex_put_value() helper to write a value to the given user
address.
However, it uses user_read_access_begin() before the write. For
architectures that differentiate between read and write accesses, like
PowerPC, futex_put_value() fails with -EFAULT.
Fix that by using the user_write_access_begin/user_write_access_end() pair
instead.
Fixes: cec199c5e39b ("futex: Implement FUTEX2_NUMA")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250811141147.322261-1-longman@redhat.com
|
|
The SRSO bug can theoretically be used to conduct user->user or guest->guest
attacks and requires a mitigation (namely IBPB instead of SBPB on context
switch) for these. So mark SRSO as being applicable to the user->user and
guest->guest attack vectors.
Additionally, SRSO supports multiple mitigations which mitigate different
potential attack vectors. Some CPUs are also immune to SRSO from
certain attack vectors (like user->kernel).
Use the specific attack vectors requiring mitigation to select the best
SRSO mitigation to avoid unnecessary performance hits.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250721160310.1804203-1-david.kaplan@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A correctness fix for delegated timestamps
- Address an NFSD shutdown hang when LOCALIO is in use
- Prevent a remotely exploitable crasher when TLS is in use
* tag 'nfsd-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
sunrpc: fix handling of server side tls alerts
nfsd: avoid ref leak in nfsd_open_local_fh()
nfsd: don't set the ctime on delegated atime updates
|
|
Add a PCI quirk to enable microphone input on the headphone jack on
the HONOR BRB-X M1010 laptop.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250811132716.45076-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Device-mapper can call add_disk() multiple times for the same gendisk
due to its two-phase creation process (dm create + dm load). This leads
to kobject double initialization errors when the underlying iSCSI devices
become temporarily unavailable and then reappear.
However, if the first add_disk() call fails and is retried, the queue_kobj
gets initialized twice, causing:
kobject: kobject (ffff88810c27bb90): tried to init an initialized object,
something is seriously wrong.
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x80
kobject_init.cold+0x43/0x51
blk_register_queue+0x46/0x280
add_disk_fwnode+0xb5/0x280
dm_setup_md_queue+0x194/0x1c0
table_load+0x297/0x2d0
ctl_ioctl+0x2a2/0x480
dm_ctl_ioctl+0xe/0x20
__x64_sys_ioctl+0xc7/0x110
do_syscall_64+0x72/0x390
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by separating kobject initialization from sysfs registration:
- Initialize queue_kobj early during gendisk allocation
- add_disk() only adds the already-initialized kobject to sysfs
- del_gendisk() removes from sysfs but doesn't destroy the kobject
- Final cleanup happens when the disk is released
Fixes: 2bd85221a625 ("block: untangle request_queue refcounting from sysfs")
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Closes: https://lore.kernel.org/all/83591d0b-2467-433c-bce0-5581298eb161@huawei.com/
Signed-off-by: Zheng Qixing <zhengqixing@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250808053609.3237836-1-zhengqixing@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250809141358.168781-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 16f5dfbc851b ("gfp: include __GFP_NOWARN in GFP_NOWAIT") made
GFP_NOWAIT implicitly include __GFP_NOWARN.
Therefore, explicit __GFP_NOWARN combined with GFP_NOWAIT (e.g.,
`GFP_NOWAIT | __GFP_NOWARN`) is now redundant. Let's clean up these
redundant flags across subsystems.
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250811081135.374315-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit ab03a61c6614 ("ublk: have a per-io daemon instead of a per-queue
daemon") allowed each ublk I/O to have an independent daemon task.
However, nr_privileged_daemon is only computed based on whether the last
I/O fetched in each ublk queue has an unprivileged daemon task.
Fix this by checking whether every fetched I/O's daemon is privileged.
Change nr_privileged_daemon from a count of queues to a boolean
indicating whether any I/Os have an unprivileged daemon.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: ab03a61c6614 ("ublk: have a per-io daemon instead of a per-queue daemon")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808155216.296170-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ublk_ch_release currently quiesces the device's request_queue while
setting force_abort/fail_io. This avoids data races by preventing
concurrent reads from the I/O path, but is not strictly needed - at this
point, canceling is already set and guaranteed to be observed by any
concurrently executing I/Os, so they will be handled properly even if
the changes to force_abort/fail_io propagate to the I/O path later.
Remove the quiesce/unquiesce calls from ublk_ch_release. This makes the
writes to force_abort/fail_io concurrent with the reads in the I/O path,
so make the accesses atomic.
Before this change, the call to blk_mq_quiesce_queue was responsible for
most (90%) of the runtime of ublk_ch_release. With that call eliminated,
ublk_ch_release runs much faster. Here is a comparison of the total time
spent in calls to ublk_ch_release when a server handling 128 devices
exits, before and after this change:
before: 1.11s
after: 0.09s
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250808-ublk_quiesce2-v1-1-f87ade33fa3d@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If the network stack keeps a reference for too long, DRBD keeps
references on a higher number of pages as a consequence.
Fix all that by no longer relying on page reference counts dropping to
an expected value. Instead, DRBD gives up its reference and lets the
system handle everything else. While at it, remove the open-coded
custom page pool mechanism and use the page_pool included in the
kernel.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Tested-by: Eric Hagberg <ehagberg@janestreet.com>
Link: https://lore.kernel.org/r/20250605103852.23029-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
xfs_zone_record_blocks not only records successfully written blocks that
now back file data, but is also used for blocks speculatively written by
garbage collection that were never linked to an inode and instantly
become invalid.
Split the latter functionality out to be easier to understand. This also
make it clear that we don't need to attach the rmap inode to a
transaction for the skipped blocks case as we never dirty any peristent
data structure.
Also make the argument order to xfs_zone_record_blocks a bit more
natural.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The quotacheck doesn't initialize sc->ip.
Cc: stable@vger.kernel.org # v6.8
Fixes: 21d7500929c8a0 ("xfs: improve dquot iteration for scrub")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
If the FS has no reflink, then atomic writes greater than 1x block are not
supported. As such, for no reflink it is pointless to accept setting
max_atomic_write when it cannot be supported, so reject max_atomic_write
mount option in this case.
It could be still possible to accept max_atomic_write option of size 1x
block if HW atomics are supported, so check for this specifically.
Fixes: 4528b9052731 ("xfs: allow sysadmins to specify a maximum atomic write limit at mount time")
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Atomic writes are not currently supported for DAX, but two problems exist:
- we may go down DAX write path for IOCB_ATOMIC, which does not handle
IOCB_ATOMIC properly
- we report non-zero atomic write limits in statx (for DAX inodes)
We may want atomic writes support on DAX in future, but just disallow for
now.
For this, ensure when IOCB_ATOMIC is set that we check the write size
versus the atomic write min and max before branching off to the DAX write
path. This is not strictly required for DAX, as we should not get this far
in the write path as FMODE_CAN_ATOMIC_WRITE should not be set.
In addition, due to reflink being supported for DAX, we automatically get
CoW-based atomic writes support being advertised. Remedy this by
disallowing atomic writes for a DAX inode for both sw and hw modes.
Reported-by: Darrick J. Wong <djwong@kernel.org>
Fixes: 9dffc58f2384 ("xfs: update atomic write limits")
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The DAX write path does not support IOCB_ATOMIC, so reject it when set.
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Add a new field to struct xfs_ibulk to directly pass XFS_IWALK* flags,
and thus remove the need to indirect the SAME_AG flag through
XFS_IBULK*.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Fix up xfs_inumbers to now pass in the XFS_IBULK* flags into the flags
argument to xfs_inobt_walk, which expects the XFS_IWALK* flags.
Currently passing the wrong flags works for non-debug builds because
the only XFS_IWALK* flag has the same encoding as the corresponding
XFS_IBULK* flag, but in debug builds it can trigger an assert that no
incorrect flag is passed. Instead just extra the relevant flag.
Fixes: 5b35d922c52798 ("xfs: Decouple XFS_IBULK flags from XFS_IWALK flags")
Cc: <stable@vger.kernel.org> # v5.19
Reported-by: cen zhang <zzzccc427@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
Commit 83a80e95e797 ("xfs: decouple xfs_trans_alloc_empty from
xfs_trans_alloc") move the place of the assert for a frozen file system
after the sb_start_intwrite call that ensures it doesn't run on frozen
file systems, and thus allows to incorrect trigger it.
Fix that by moving it back to where it belongs.
Fixes: 83a80e95e797 ("xfs: decouple xfs_trans_alloc_empty from xfs_trans_alloc")
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
After commit 13a4b7fb6260 ("pmdomain: core: Leave powered-on genpds on
until late_initcall_sync") was applied, the Tegra210 Jetson TX1 board
failed to boot. Looking into this issue, before this commit was applied,
if any of the Tegra power-domains were in 'on' state when the kernel
booted, they were being turned off by the genpd core before any driver
had chance to request them. This was purely by luck and a consequence of
the power-domains being turned off earlier during boot. After this
commit was applied, any power-domains in the 'on' state are kept on for
longer during boot and therefore, may never transitioned to the off
state before they are requested/used. The hang on the Tegra210 Jetson
TX1 is caused because devices in some power-domains are accessed without
the power-domain being turned off and on, indicating that the
power-domain is not in a completely on state.
>From reviewing the Tegra PMC driver code, if a power-domain is in the
'on' state there is no guarantee that all the necessary clocks
associated with the power-domain are on and even if they are they would
not have been requested via the clock framework and so could be turned
off later. Some power-domains also have a 'clamping' register that needs
to be configured as well. In short, if a power-domain is already 'on' it
is difficult to know if it has been configured correctly. Given that the
power-domains happened to be switched off during boot previously, to
ensure that they are in a good known state on boot, fix this by
switching off any power-domains that are on initially when registering
the power-domains with the genpd framework.
Note that commit 05cfb988a4d0 ("soc/tegra: pmc: Initialise resets
associated with a power partition") updated the
tegra_powergate_of_get_resets() function to pass the 'off' to ensure
that the resets for the power-domain are in the correct state on boot.
However, now that we may power off a domain on boot, if it is on, it is
better to move this logic into the tegra_powergate_add() function so
that there is a single place where we are handling the initial state of
the power-domain.
Fixes: a38045121bf4 ("soc/tegra: pmc: Add generic PM domain support")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250731121832.213671-1-jonathanh@nvidia.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Framework Laptop 13 (AMD Ryzen AI 300) requires the same quirk for
headset detection as other Framework 13 models.
Signed-off-by: Christopher Eby <kreed@kreed.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250810030006.9060-1-kreed@kreed.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
