| Age | Commit message (Collapse) | Author |
|---|
|
Commit 34331d7beed7 ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.
The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.
Additionally, commit 266b5d02e14f ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.
Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.
Fixes: 266b5d02e14f ("smb: client: fix race condition in negotiate timeout by using more precise timing")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
to 2.56
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We already called ib_drain_qp() before and that makes sure
send_done() was called with IB_WC_WR_FLUSH_ERR, but
didn't called atomic_dec_and_test(&sc->send_io.pending.count)
So we may never reach the info->send_pending == 0 condition.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 5349ae5e05fa ("smb: client: let send_done() cleanup before calling smbd_disconnect_rdma_connection()")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This is step 4/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
In compound_send_recv(), when wait_for_response() is interrupted by
signals, the code attempts to cancel pending requests by changing
their callbacks to cifs_cancelled_callback. However, there's a race
condition between signal interruption and network response processing
that causes both mid_q_entry and server buffer leaks:
```
User foreground process cifsd
cifs_readdir
open_cached_dir
cifs_send_recv
compound_send_recv
smb2_setup_request
smb2_mid_entry_alloc
smb2_get_mid_entry
smb2_mid_entry_alloc
mempool_alloc // alloc mid
kref_init(&temp->refcount); // refcount = 1
mid[0]->callback = cifs_compound_callback;
mid[1]->callback = cifs_compound_last_callback;
smb_send_rqst
rc = wait_for_response
wait_event_state TASK_KILLABLE
cifs_demultiplex_thread
allocate_buffers
server->bigbuf = cifs_buf_get()
standard_receive3
->find_mid()
smb2_find_mid
__smb2_find_mid
kref_get(&mid->refcount) // +1
cifs_handle_standard
handle_mid
/* bigbuf will also leak */
mid->resp_buf = server->bigbuf
server->bigbuf = NULL;
dequeue_mid
/* in for loop */
mids[0]->callback
cifs_compound_callback
/* Signal interrupts wait: rc = -ERESTARTSYS */
/* if (... || midQ[i]->mid_state == MID_RESPONSE_RECEIVED) *?
midQ[0]->callback = cifs_cancelled_callback;
cancelled_mid[i] = true;
/* The change comes too late */
mid->mid_state = MID_RESPONSE_READY
release_mid // -1
/* cancelled_mid[i] == true causes mid won't be released
in compound_send_recv cleanup */
/* cifs_cancelled_callback won't executed to release mid */
```
The root cause is that there's a race between callback assignment and
execution.
Fix this by introducing per-mid locking:
- Add spinlock_t mid_lock to struct mid_q_entry
- Add mid_execute_callback() for atomic callback execution
- Use mid_lock in cancellation paths to ensure atomicity
This ensures that either the original callback or the cancellation
callback executes atomically, preventing reference count leaks when
requests are interrupted by signals.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220404
Fixes: ee258d79159a ("CIFS: Move credit processing to mid callbacks for SMB3")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With KASAN enabled, it is possible to get a slab out of bounds
during mount to ksmbd due to missing check in parse_server_interfaces()
(see below):
BUG: KASAN: slab-out-of-bounds in
parse_server_interfaces+0x14ee/0x1880 [cifs]
Read of size 4 at addr ffff8881433dba98 by task mount/9827
CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G
OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. Precision Tower 3620/0MWYPT,
BIOS 2.13.1 06/14/2019
Call Trace:
<TASK>
dump_stack_lvl+0x9f/0xf0
print_report+0xd1/0x670
__virt_addr_valid+0x22c/0x430
? parse_server_interfaces+0x14ee/0x1880 [cifs]
? kasan_complete_mode_report_info+0x2a/0x1f0
? parse_server_interfaces+0x14ee/0x1880 [cifs]
kasan_report+0xd6/0x110
parse_server_interfaces+0x14ee/0x1880 [cifs]
__asan_report_load_n_noabort+0x13/0x20
parse_server_interfaces+0x14ee/0x1880 [cifs]
? __pfx_parse_server_interfaces+0x10/0x10 [cifs]
? trace_hardirqs_on+0x51/0x60
SMB3_request_interfaces+0x1ad/0x3f0 [cifs]
? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs]
? SMB2_tcon+0x23c/0x15d0 [cifs]
smb3_qfs_tcon+0x173/0x2b0 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
? cifs_get_tcon+0x105d/0x2120 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_get_tcon+0x105d/0x2120 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
cifs_mount_get_tcon+0x369/0xb90 [cifs]
? dfs_cache_find+0xe7/0x150 [cifs]
dfs_mount_share+0x985/0x2970 [cifs]
? check_path.constprop.0+0x28/0x50
? save_trace+0x54/0x370
? __pfx_dfs_mount_share+0x10/0x10 [cifs]
? __lock_acquire+0xb82/0x2ba0
? __kasan_check_write+0x18/0x20
cifs_mount+0xbc/0x9e0 [cifs]
? __pfx_cifs_mount+0x10/0x10 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_setup_cifs_sb+0x29d/0x810 [cifs]
cifs_smb3_do_mount+0x263/0x1990 [cifs]
Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On a motherboard with an AMD Granite Ridge CPU there is a report
that 3.5mm microphone and headphones aren't working. In the
log it's observed:
snd_hda_intel 0000:02:00.6: Skipping the device on the denylist
This was because of commit df42ee7e22f03 ("ALSA: hda: Add ASRock
X670E Taichi to denylist"). Reverting this commit allows the
microphone and headphones to work again. As at least some combinations
of this motherboard do have applicable devices, revert so that they
can be probed.
Cc: Richard Gong <richard.gong@amd.com>
Cc: Juan Martinez <juan.martinez@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250813140427.1577172-1-superm1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some inline functions are unused depending on kconfig, and the recent
change for clang builds made those handled as errors with W=1.
For avoiding pitfalls, mark those with __maybe_unused attributes.
Link: https://patch.msgid.link/20250813153628.12303-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 5 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels.
10 of these fixes are for MM"
* tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: proc_maps_open allow proc_mem_open to return NULL
mm/mremap: avoid expensive folio lookup on mremap folio pte batch
userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry
mm: pass page directly instead of using folio_page
selftests/proc: fix string literal warning in proc-maps-race.c
fs/proc/task_mmu: hold PTL in pagemap_hugetlb_range and gather_hugetlb_stats
mm/smaps: fix race between smaps_hugetlb_range and migration
mm: fix the race between collapse and PT_RECLAIM under per-vma lock
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()
MAINTAINERS: add Masami as a reviewer of hung task detector
mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock
kasan/test: fix protection against compiler elision
|
|
Change the name of the kcontrol from "Gain" to "Volume".
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250813100708.12197-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 0b2b066f8a85 ("io_uring/io-wq: only create a new worker
if it can make progress"), in our produce environment, we still
observe that part of io_worker threads keeps creating and destroying.
After analysis, it was confirmed that this was due to a more complex
scenario involving a large number of fsync operations, which can be
abstracted as frequent write + fsync operations on multiple files in
a single uring instance. Since write is a hash operation while fsync
is not, and fsync is likely to be suspended during execution, the
action of checking the hash value in
io_wqe_dec_running cannot handle such scenarios.
Similarly, if hash-based work and non-hash-based work are sent at the
same time, similar issues are likely to occur.
Returning to the starting point of the issue, when a new work
arrives, io_wq_enqueue may wake up free worker A, while
io_wq_dec_running may create worker B. Ultimately, only one of A and
B can obtain and process the task, leaving the other in an idle
state. In the end, the issue is caused by inconsistent logic in the
checks performed by io_wq_enqueue and io_wq_dec_running.
Therefore, the problem can be resolved by checking for available
workers in io_wq_dec_running.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Reviewed-by: Diangang Li <lidiangang@bytedance.com>
Link: https://lore.kernel.org/r/20250813120214.18729-1-changfengnan@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The commit 245618f8e45f ("block: protect wbt_lat_usec using
q->elevator_lock") protected wbt_enable_default() with
q->elevator_lock; however, it also placed wbt_enable_default()
before blk_queue_flag_set(QUEUE_FLAG_REGISTERED, q);, resulting
in wbt failing to be enabled.
Moreover, the protection of wbt_enable_default() by q->elevator_lock
was removed in commit 78c271344b6f ("block: move wbt_enable_default()
out of queue freezing from sched ->exit()"), so we can directly fix
this issue by placing wbt_enable_default() after
blk_queue_flag_set(QUEUE_FLAG_REGISTERED, q);.
Additionally, this issue also causes the inability to read the
wbt_lat_usec file, and the scenario is as follows:
root@q:/sys/block/sda/queue# cat wbt_lat_usec
cat: wbt_lat_usec: Invalid argument
root@q:/data00/sjc/linux# ls /sys/kernel/debug/block/sda/rqos
cannot access '/sys/kernel/debug/block/sda/rqos': No such file or directory
root@q:/data00/sjc/linux# find /sys -name wbt
/sys/kernel/debug/tracing/events/wbt
After testing with this patch, wbt can be enabled normally.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Cc: stable@vger.kernel.org
Fixes: 245618f8e45f ("block: protect wbt_lat_usec using q->elevator_lock")
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250812154257.57540-1-sunjunchao@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix spelling mistake directoy to directory
Reported-by: codespell
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250813071837.668613-1-karanja99erick@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The __clear_task_blocked_on() helper added a number of sanity
checks ensuring we hold the mutex wait lock and that the task
we are clearing blocked_on pointer (if set) matches the mutex.
However, there is an edge case in the _ww_mutex_wound() logic
where we need to clear the blocked_on pointer for the task that
owns the mutex, not the task that is waiting on the mutex.
For this case the sanity checks aren't valid, so handle this
by allowing a NULL lock to skip the additional checks.
K Prateek Nayak and Maarten Lankhorst also pointed out that in
this case where we don't hold the owner's mutex wait_lock, we
need to be a bit more careful using READ_ONCE/WRITE_ONCE in both
the __clear_task_blocked_on() and __set_task_blocked_on()
implementations to avoid accidentally tripping WARN_ONs if two
instances race. So do that here as well.
This issue was easier to miss, I realized, as the test-ww_mutex
driver only exercises the wait-die class of ww_mutexes. I've
sent a patch[1] to address this so the logic will be easier to
test.
[1]: https://lore.kernel.org/lkml/20250801023358.562525-2-jstultz@google.com/
Fixes: a4f0b6fef4b0 ("locking/mutex: Add p->blocked_on wrappers for correctness checks")
Closes: https://lore.kernel.org/lkml/68894443.a00a0220.26d0e1.0015.GAE@google.com/
Reported-by: syzbot+602c4720aed62576cd79@syzkaller.appspotmail.com
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20250805001026.2247040-1-jstultz@google.com
|
|
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150
Fixes: 78d9f48f7f44 ("netfilter: nf_tables: add devices to existing flowtable")
Fixes: b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
The estimator kthreads' affinity are defined by sysctl overwritten
preferences and applied through a plain call to the scheduler's affinity
API.
However since the introduction of managed kthreads preferred affinity,
such a practice shortcuts the kthreads core code which eventually
overwrites the target to the default unbound affinity.
Fix this with using the appropriate kthread's API.
Fixes: d1a89197589c ("kthread: Default affine kthread to its preferred NUMA node")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Blamed commit broke the check for a null scratch map:
- if (unlikely(!m || !*raw_cpu_ptr(m->scratch)))
+ if (unlikely(!raw_cpu_ptr(m->scratch)))
This should have been "if (!*raw_ ...)".
Use the pattern of the avx2 version which is more readable.
This can only be reproduced if avx2 support isn't available.
Fixes: d8d871a35ca9 ("netfilter: nft_set_pipapo: merge pipapo_get/lookup")
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
Check a race where data disappears from the TCP socket after
TLS signaled that its ready to receive.
ok 6 global.data_steal
# RUN tls_basic.base_base ...
# OK tls_basic.base_base
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TLS expects that it owns the receive queue of the TCP socket.
This cannot be guaranteed in case the reader of the TCP socket
entered before the TLS ULP was installed, or uses some non-standard
read API (eg. zerocopy ones). Replace the WARN_ON() and a buggy
early exit (which leaves anchor pointing to a freed skb) with real
error handling. Wipe the parsing state and tell the reader to retry.
We already reload the anchor every time we (re)acquire the socket lock,
so the only condition we need to avoid is an out of bounds read
(not having enough bytes in the socket for previously parsed record len).
If some data was read from under TLS but there's enough in the queue
we'll reload and decrypt what is most likely not a valid TLS record.
Leading to some undefined behavior from TLS perspective (corrupting
a stream? missing an alert? missing an attack?) but no kernel crash
should take place.
Reported-by: William Liu <will@willsroot.io>
Reported-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://lore.kernel.org/tFjq_kf7sWIG3A7CrCg_egb8CVsT_gsmHAK0_wxDPJXfIzxFAMxqmLwp3MlU5EHiet0AwwJldaaFdgyHpeIUCS-3m3llsmRzp9xIOBR4lAI=@syst3mfailure.io
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250807232907.600366-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull in outstanding commits for 6.17.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
syzbot reported the following ABBA deadlock:
CPU0 CPU1
---- ----
n_vclocks_store()
lock(&ptp->n_vclocks_mux) [1]
(physical clock)
pc_clock_adjtime()
lock(&clk->rwsem) [2]
(physical clock)
...
ptp_clock_freerun()
ptp_vclock_in_use()
lock(&ptp->n_vclocks_mux) [3]
(physical clock)
ptp_clock_unregister()
posix_clock_unregister()
lock(&clk->rwsem) [4]
(virtual clock)
Since ptp virtual clock is registered only under ptp physical clock, both
ptp_clock and posix_clock must be physical clocks for ptp_vclock_in_use()
to lock &ptp->n_vclocks_mux and check ptp->n_vclocks.
However, when unregistering vclocks in n_vclocks_store(), the locking
ptp->n_vclocks_mux is a physical clock lock, but clk->rwsem of
ptp_clock_unregister() called through device_for_each_child_reverse()
is a virtual clock lock.
Therefore, clk->rwsem used in CPU0 and clk->rwsem used in CPU1 are
different locks, but in lockdep, a false positive occurs because the
possibility of deadlock is determined through lock-class.
To solve this, lock subclass annotation must be added to the posix_clock
rwsem of the vclock.
Reported-by: syzbot+7cfb66a237c4a5fb22ad@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7cfb66a237c4a5fb22ad
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250728062649.469882-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Users of the ixgbe driver report that after adding devlink support by
the commit a0285236ab93 ("ixgbe: add initial devlink support") their
configs got broken due to unwanted changes of interface names. It's
caused by automatic phys_port_name generation during devlink port
initialization flow.
To prevent from that set no_phys_port_name flag for ixgbe devlink ports.
Reported-by: David Howells <dhowells@redhat.com>
Closes: https://lore.kernel.org/netdev/3452224.1745518016@warthog.procyon.org.uk/
Reported-by: David Kaplan <David.Kaplan@amd.com>
Closes: https://lore.kernel.org/netdev/LV3PR12MB92658474624CCF60220157199470A@LV3PR12MB9265.namprd12.prod.outlook.com/
Fixes: a0285236ab93 ("ixgbe: add initial devlink support")
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently when adding devlink port, phys_port_name is automatically
generated within devlink port initialization flow. As a result adding
devlink port support to driver may result in forced changes of interface
names, which breaks already existing network configs.
This is an expected behavior but in some scenarios it would not be
preferable to provide such limitation for legacy driver not being able to
keep 'pre-devlink' interface name.
Add flag no_phys_port_name to devlink_port_attrs struct which indicates
if devlink should not alter name of interface.
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Link: https://lore.kernel.org/all/nbwrfnjhvrcduqzjl4a2jafnvvud6qsbxlvxaxilnryglf4j7r@btuqrimnfuly/
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
During process kill, drm_sched_entity_flush() will kill the vm
entities. The following job submissions of this process will fail, and
the resources of these jobs have not been released, nor have the fences
been signalled, causing tasks to hang and timeout.
Fix by check entity status in amdgpu_vm_ready() and avoid submit jobs to
stopped entity.
v2: add amdgpu_vm_ready() check before amdgpu_vm_clear_freed() in
function amdgpu_cs_vm_handling().
Fixes: 1f02f2044bda ("drm/amdgpu: Avoid extra evict-restore process.")
Signed-off-by: Liu01 Tong <Tong.Liu01@amd.com>
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f101c13a8720c73e67f8f9d511fbbeda95bcedb1)
|
|
calc_clk_div() will only return a non-zero value (-EINVAL)
in case of error. On the other hand, req->rate is an unsigned long.
It seems quite odd that req->rate would be assigned a negative value,
which is clearly not a rate, and success would be returned.
Reinstate previous logic, which would just return error.
Fixes: afd529d74002 ("ASoC: stm: stm32_i2s: convert from round_rate() to determine_rate()")
Link: https://scan7.scan.coverity.com/#/project-view/53936/11354?selectedIssue=1647702
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Link: https://patch.msgid.link/20250729020052.404617-1-sperezglz@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
It should use vm flags instead of pte flags
to specify bo vm attributes.
Fixes: 7946340fa389 ("drm/amdgpu: Move csa related code to separate file")
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b08425fa77ad2f305fe57a33dceb456be03b653f)
|
|
The vram block allocation flag must be cleared
before making vram reservation, otherwise reserving
addresses within the currently freed memory range
will always fail.
Fixes: c9cad937c0c5 ("drm/amdgpu: add drm buddy support to amdgpu")
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d38eaf27de1b8584f42d6fb3f717b7ec44b3a7a1)
|
|
The fw reserved GFX command is only supported starting from PSP fw
version 0x3a0e14 and 0x3b0e0d. Older versions do not support this command.
Add a version guard to ensure the command is only used when the running
PSP fw meets the minimum version requirement.
This ensures backward compatibility and safe operation across fw
revisions.
Fixes: a3b7f9c306e1 ("drm/amdgpu: reclaim psp fw reservation memory region")
Signed-off-by: Frank Min <Frank.Min@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 065e23170a1e09bc9104b761183e59562a029619)
|
|
Ring provided buffers are potentially only valid within the single
execution context in which they were acquired. io_uring deals with this
and invalidates them on retry. But on the networking side, if
MSG_WAITALL is set, or if the socket is of the streaming type and too
little was processed, then it will hang on to the buffer rather than
recycle or commit it. This is problematic for two reasons:
1) If someone unregisters the provided buffer ring before a later retry,
then the req->buf_list will no longer be valid.
2) If multiple sockers are using the same buffer group, then multiple
receives can consume the same memory. This can cause data corruption
in the application, as either receive could land in the same
userspace buffer.
Fix this by disallowing partial retries from pinning a provided buffer
across multiple executions, if ring provided buffers are used.
Cc: stable@vger.kernel.org
Reported-by: pt x <superman.xpt@gmail.com>
Fixes: c56e022c0a27 ("io_uring: add support for user mapped provided buffer ring")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
`rustdoc` can get confused when generating documentation into a folder
that contains generated files from other `rustdoc` versions.
For instance, running something like:
rustup default 1.78.0
make LLVM=1 rustdoc
rustup default 1.88.0
make LLVM=1 rustdoc
may generate errors like:
error: couldn't generate documentation: invalid template: last line expected to start with a comment
|
= note: failed to create or modify "./Documentation/output/rust/rustdoc/src-files.js"
Thus just always clean the output folder before generating the
documentation -- we are anyway regenerating it every time the `rustdoc`
target gets called, at least for the time being.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Daniel Almeida <daniel.almeida@collabora.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089/topic/x/near/527201113
Reviewed-by: Tamir Duberstein <tamird@kernel.org>
Link: https://lore.kernel.org/r/20250726133435.2460085-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Pull habanalabs fix from Al Viro:
"Yet another use-after-free fix due to dma_buf_fd() misuse"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
habanalabs: fix UAF in export_dmabuf()
|
|
Starting with Rust 1.88.0 (released 2025-06-26), `rustdoc` complains
about a target modifier mismatch in configurations where `-Zfixed-x18`
is passed:
error: mixing `-Zfixed-x18` will cause an ABI mismatch in crate `rust_out`
|
= help: the `-Zfixed-x18` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zfixed-x18` in this crate is incompatible with `-Zfixed-x18=` in dependency `core`
= help: set `-Zfixed-x18=` in this crate or unset `-Zfixed-x18` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=fixed-x18` to silence this error
The reason is that `rustdoc` was not passing the target modifiers when
configuring the session options, and thus it would report a mismatch
that did not exist as soon as a target modifier is used in a dependency.
We did not notice it in the kernel until now because `-Zfixed-x18` has
been a target modifier only since 1.88.0 (and it is the only one we use
so far).
The issue has been reported upstream [1] and a fix has been submitted
[2], including a test similar to the kernel case.
[ This is now fixed upstream (thanks Guillaume for the quick review),
so it will be fixed in Rust 1.90.0 (expected 2025-09-18).
- Miguel ]
Meanwhile, conditionally pass `-Cunsafe-allow-abi-mismatch=fixed-x18`
to workaround the issue on our side.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Reported-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Closes: https://lore.kernel.org/rust-for-linux/36cdc798-524f-4910-8b77-d7b9fac08d77@oss.qualcomm.com/
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250727092317.2930617-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
It turns out that the ECDT table inside the ThinkBook 14 G7 IML
contains a valid EC description but an invalid ID string
("_SB.PC00.LPCB.EC0"). Ignoring this ECDT based on the invalid
ID string prevents the kernel from detecting the built-in touchpad,
so relax the sanity check of the ID string and only reject ECDTs
with empty ID strings.
Reported-by: Ilya K <me@0upti.me>
Fixes: 7a0d59f6a913 ("ACPI: EC: Ignore ECDT tables with an invalid ID string")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Ilya K <me@0upti.me>
Link: https://patch.msgid.link/20250729062038.303734-1-W_Armin@gmx.de
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Clamp writes to power limits powerX_crit/currX_crit, powerX_cap,
powerX_max, to the maximum supported by the pcode mailbox
when sysfs-provided values exceed this limit.
Although the pcode already performs clamping, values beyond the pcode
mailbox's supported range get truncated, leading to incorrect
critical power settings.
This patch ensures proper clamping to prevent such truncation.
v2:
- Address below review comments. (Riana)
- Split comments into multiple sentences.
- Use local variables for readability.
- Add a debug log.
- Use u64 instead of unsigned long.
v3:
- Change drm_dbg logs to drm_info. (Badal)
v4:
- Rephrase the drm_info log. (Rodrigo, Riana)
- Rename variable max_mbx_power_limit to max_supp_power_limit, as
limit is same for platforms with and without mailbox power limit
support.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fb1b70607f73 ("drm/xe/hwmon: Expose power attributes")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://lore.kernel.org/r/20250808185310.3466529-1-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit d301eb950da59f962bafe874cf5eb6d61a85b2c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When the xe buffer-object shrinker allows GPU waits and write-back,
(typically from kswapd), perform multiple passes, skipping
subsequent passes if the shrinker number of scanned objects target
is reached.
1) Without GPU waits and write-back
2) Without write-back
3) With both GPU-waits and write-back
This is to avoid stalls and costly write- and readbacks unless they
are really necessary.
v2:
- Don't test for scan completion twice. (Stuart Summers)
- Update tags.
Reported-by: melvyn <melvyn2@dnsense.pub>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5557
Cc: Summers Stuart <stuart.summers@intel.com>
Fixes: 00c8efc3180f ("drm/xe: Add a shrinker for xe bos")
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250805074842.11359-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 80944d334182ce5eb27d00e2bf20a88bfc32dea1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If we hit the error path, the previous fence (if there is one) has
already been put() prior to this, so doing a fence_wait could lead to
UAF. Tweak the flow to do to the put() until after we do the wait.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-8-matthew.auld@intel.com
(cherry picked from commit 9b7ca35ed28fe5fad86e9d9c24ebd1271e4c9c3e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
With non-page aligned copy, we need to use 4 byte aligned pitch, however
the size itself might still be close to our maximum of ~8M, and so the
dimensions of the copy can easily exceed the S16_MAX limit of the copy
command leading to the following assert:
xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed!
platform: BATTLEMAGE subplatform: 1
graphics: Xe2_HPG 20.01 step A0
media: Xe2_HPM 13.01 step A1
tile: 0 VRAM 10.0 GiB
GT: 0 type 1
WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe]
To fix this account for the pitch when calculating the number of current
bytes to copy.
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-7-matthew.auld@intel.com
(cherry picked from commit 8c2d61e0e916e077fda7e7b8e67f25ffe0f361fc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
If the buf + offset is not aligned to XE_CAHELINE_BYTES we fallback to
using a bounce buffer. However the bounce buffer here is allocated on
the stack, and the only alignment requirement here is that it's
naturally aligned to u8, and not XE_CACHELINE_BYTES. If the bounce
buffer is also misaligned we then recurse back into the function again,
however the new bounce buffer might also not be aligned, and might never
be until we eventually blow through the stack, as we keep recursing.
Instead of using the stack use kmalloc, which should respect the
power-of-two alignment request here. Fixes a kernel panic when
triggering this path through eudebug.
v2 (Stuart):
- Add build bug check for power-of-two restriction
- s/EINVAL/ENOMEM/
Fixes: 270172f64b11 ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250731093807.207572-6-matthew.auld@intel.com
(cherry picked from commit 38b34e928a08ba594c4bbf7118aa3aadacd62fff)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix bug in qgroups reporting incorrect usage for higher level qgroups
- in zoned mode, do not select metadata group as finish target
- convert xarray lock to RCU when trying to release extent buffer to
avoid a deadlock
- do not allow relocation on partially dropped subvolumes, which is
normally not possible but has been reported on old filesystems
- in tree-log, report errors on missing block group when unaccounting
log tree extent buffers
- with large folios, fix range length when processing ordered extents
* tag 'for-6.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix iteration bug in __qgroup_excl_accounting()
btrfs: zoned: do not select metadata BG as finish target
btrfs: do not allow relocation of partially dropped subvolumes
btrfs: error on missing block group when unaccounting log tree extent buffers
btrfs: fix wrong length parameter for btrfs_cleanup_ordered_extents()
btrfs: make btrfs_cleanup_ordered_extents() support large folios
btrfs: fix subpage deadlock in try_release_subpage_extent_buffer()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
- Add a mitigation for a cache coherency vulnerability when running an
SNP guest which makes sure all cache lines belonging to a 4K page are
evicted after latter has been converted to a guest-private page
[ SNP: Secure Nested Paging - not to be confused with Single Nucleotide
Polymorphism, which is the more common use of that TLA. I am on a
mission to write out the more obscure TLAs in order to keep track of
them.
Because while math tells us that there are only about 17k different
combinations of three-letter acronyms using English letters (26^3), I
am convinced that somehow Intel, AMD and ARM have together figured out
new mathematics, and have at least a million different TLAs that they
use. - Linus ]
* tag 'snp_cache_coherency' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Evict cache lines during SNP memory validation
|
|
The gpio-mlxbf3 driver interfaces with two GPIO controllers,
device instance 0 and 1. There is a single IRQ resource shared
between the two controllers, and it is found in the ACPI table for
device instance 0. The driver should not use platform_get_irq(),
otherwise this error is logged when probing instance 1:
mlxbf3_gpio MLNXBF33:01: error -ENXIO: IRQ index 0 not found
Cc: stable@vger.kernel.org
Fixes: cd33f216d241 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/ce70b98a201ce82b9df9aa80ac7a5eeaa2268e52.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 10af0273a35ab4513ca1546644b8c853044da134.
While this change was merged, it is not the preferred solution.
During review of a similar change to the gpio-mlxbf2 driver, the
use of "platform_get_irq_optional" was identified as the preferred
solution, so let's use it for gpio-mlxbf3 driver as well.
Cc: stable@vger.kernel.org
Fixes: 10af0273a35a ("gpio: mlxbf3: only get IRQ for device instance 0")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/8d2b630c71b3742f2c74242cf7d602706a6108e6.1754928650.git.davthompson@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Commit d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit
application") added a pr->performance check that prevents the frequency
QoS request from being added when the given processor has no performance
object. Unfortunately, this causes a WARN() in freq_qos_remove_request()
to trigger on an attempt to take the given CPU offline later because the
frequency QoS object has not been added for it due to the missing
performance object.
Address this by moving the pr->performance check before calling
acpi_processor_get_platform_limit() so it only prevents a limit from
being set for the CPU if the performance object is not present. This
way, the frequency QoS request is added as it was before the above
commit and it is present all the time along with the CPU's cpufreq
policy regardless of whether or not the CPU is online.
Fixes: d33bd88ac0eb ("ACPI: processor: perflib: Fix initial _PPC limit application")
Tested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2801421.mvXUDI8C0e@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-08-11
1) Fix flushing of all states in xfrm_state_fini.
From Sabrina Dubroca.
2) Fix some IPsec software offload features. These
got lost with some recent HW offload changes.
From Sabrina Dubroca.
Please pull or let me know if there are problems.
* tag 'ipsec-2025-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
udp: also consider secpath when evaluating ipsec use for checksumming
xfrm: bring back device check in validate_xmit_xfrm
xfrm: restore GSO for SW crypto
xfrm: flush all states in xfrm_state_fini
====================
Link: https://patch.msgid.link/20250811092008.731573-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
'net-prevent-deadlocks-and-mis-configuration-with-per-napi-threaded-config'
Jakub Kicinski says:
====================
net: prevent deadlocks and mis-configuration with per-NAPI threaded config
Running the test added with a recent fix on a driver with persistent
NAPI config leads to a deadlock. The deadlock is fixed by patch 3,
patch 2 is I think a more fundamental problem with the way we
implemented the config.
I hope the fix makes sense, my own thinking is definitely colored
by my preference (IOW how the per-queue config RFC was implemented).
v1: https://lore.kernel.org/20250808014952.724762-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250809001205.1147153-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The following order of calls currently deadlocks if:
- device has threaded=1; and
- NAPI has persistent config with threaded=0.
netif_napi_add_weight_config()
dev->threaded == 1
napi_kthread_create()
napi_enable()
napi_restore_config()
napi_set_threaded(0)
napi_stop_kthread()
while (NAPIF_STATE_SCHED)
msleep(20)
We deadlock because disabled NAPI has STATE_SCHED set.
Creating a thread in netif_napi_add() just to destroy it in
napi_disable() is fairly ugly in the first place. Let's read
both the device config and the NAPI config in netif_napi_add().
Fixes: e6d76268813d ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have to make sure that all future NAPIs will have the right threaded
state when the state is configured on the device level.
We chose not to have an "unset" state for threaded, and not to wipe
the NAPI config clean when channels are explicitly disabled.
This means the persistent config structs "exist" even when their NAPIs
are not instantiated.
Differently put - the NAPI persistent state lives in the net_device
(ncfg == struct napi_config):
,--- [napi 0] - [napi 1]
[dev] | |
`--- [ncfg 0] - [ncfg 1]
so say we a device with 2 queues but only 1 enabled:
,--- [napi 0]
[dev] |
`--- [ncfg 0] - [ncfg 1]
now we set the device to threaded=1:
,---------- [napi 0 (thr:1)]
[dev(thr:1)] |
`---------- [ncfg 0 (thr:1)] - [ncfg 1 (thr:?)]
Since [ncfg 1] was not attached to a NAPI during configuration we
skipped it. If we create a NAPI for it later it will have the old
setting (presumably disabled). One could argue if this is right
or not "in principle", but it's definitely not how things worked
before per-NAPI config..
Fixes: 2677010e7793 ("Add support to set NAPI threaded for individual NAPI")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The test is implicitly assuming the device only has 2 queues.
A real device will likely have more. The exact problem is that
because NAPIs get added to the list from the head, the netlink
dump reports them in reverse order. So the naive napis[0] will
actually likely give us the _last_ NAPI, not the first one.
Re-enable all the NAPIs instead of hard-coding 2 in the test.
This way the NAPIs we operated on will always reappear,
doesn't matter where they were in the registration order.
Fixes: e6d76268813d ("net: Update threaded state in napi config in netif_set_threaded")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250809001205.1147153-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In aw8xxxx_profile_info(), strscpy() is called with the length of the
source string "null" rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'name' points to the fixed-size
buffer 'uinfo->value.enumerated.name', we can safely omit the size
argument and let strscpy() infer it using sizeof() and remove 'name'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250810214144.1985-2-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
udp_child_ehash_entries -> udp_child_hash_entries
Fixes: 9804985bf27f ("udp: Introduce optional per-netns hash table.")
Signed-off-by: Jordan Rife <jordan@jrife.io>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250808185800.1189042-1-jordan@jrife.io
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Yao Zi says:
====================
Fix broken link with TH1520 GMAC when linkspeed changes
It's noted that on TH1520 SoC, the GMAC's link becomes broken after
the link speed is changed (for example, running ethtool -s eth0 speed
100 on the peer when negotiated to 1Gbps), but the GMAC could function
normally if the speed is brought back to the initial.
Just like many other SoCs utilizing STMMAC IP, we need to adjust the TX
clock supplying TH1520's GMAC through some SoC-specific glue registers
when linkspeed changes. But it's found that after the full kernel
startup, reading from them results in garbage and writing to them makes
no effect, which is the cause of broken link.
Further testing shows perisys-apb4-hclk must be ungated for normal
access to Th1520 GMAC APB glue registers, which is neither described in
dt-binding nor acquired by the driver.
This series expands the dt-binding of TH1520's GMAC to allow an extra
"APB glue registers interface clock", instructs the driver to acquire
and enable the clock, and finally supplies CLK_PERISYS_APB4_HCLK for
TH1520's GMACs in SoC devicetree.
v2: https://lore.kernel.org/netdev/20250801091240.46114-1-ziyao@disroot.org/
v1: https://lore.kernel.org/all/20250729093734.40132-1-ziyao@disroot.org/
====================
Link: https://patch.msgid.link/20250808093655.48074-2-ziyao@disroot.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
