| Age | Commit message (Collapse) | Author |
|---|
|
Spectrum-2 PHY layer introduces a calibration period which is a part of the
Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for
the firmware to come out of boot. This does not increase system boot time
in cases where the firmware PHY calibration process is done quickly.
Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a packet should be trapped to the CPU the device consumes a WQE
(work queue element) from an RDQ (receive descriptor queue) and copies
the packet to the address specified in the WQE. The device then tries to
post a CQE (completion queue element) that contains various metadata
(e.g., ingress port) about the packet to a CQ (completion queue).
In case the device managed to consume a WQE, but did not manage to post
the corresponding CQE, it will get stuck. This unlikely situation can be
triggered due to the scheme the driver is currently using to process
CQEs.
The driver will consume up to 512 CQEs at a time and after processing
each corresponding WQE it will ring the RDQ's doorbell, letting the
device know that a new WQE was posted for it to consume. Only after
processing all the CQEs (up to 512), the driver will ring the CQ's
doorbell, letting the device know that new ones can be posted.
Fix this by having the driver ring the CQ's doorbell for every processed
CQE, but before ringing the RDQ's doorbell. This guarantees that
whenever we post a new WQE, there is a corresponding CQE available. Copy
the currently processed CQE to prevent the device from overwriting it
with a new CQE after ringing the doorbell.
Note that the driver still arms the CQ only after processing all the
pending CQEs, so that interrupts for this CQ will only be delivered
after the driver finished its processing.
Before commit 8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1
and version 2") the issue was virtually impossible to trigger since the
number of CQEs was twice the number of WQEs and the number of CQEs
processed at a time was equal to the number of available WQEs.
Fixes: 8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1 and version 2")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Semion Lisyansky <semionl@mellanox.com>
Tested-by: Semion Lisyansky <semionl@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates from Marc Zyngier
- Add missing DT translation call in stm32-exti
- Fix uninitialized mutex in the GICv3 MBI support code
- Drop useless GPIO includes from the madera driver
- Fix PCI Multi-MSI allocation with aliasing devices on GICv3 ITS
|
|
Update email addresses of liquidio driver maintainers. Also remove a
former maintainer.
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Acked-by: Derek Chickles <dchickles@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
"also enables" should not be spelled as one word.
Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In certain cases, pskb_trim_rcsum() may change skb pointers.
Reinitialize header pointers afterwards to avoid potential
use-after-frees. Add a note in the documentation of
pskb_trim_rcsum(). Found by KASAN.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a regression fix at v4l2 core, with affects multi-plane streams
- a fix at vim2m driver
* tag 'media/v5.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vim2m: only cancel work if it is for right context
media: v4l: ioctl: Validate num_planes for debug messages
media: v4l: ioctl: Validate num_planes before using it
media: v4l2-ioctl: Clear only per-plane reserved fields
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas::
- Fix PCI kconfig menu organization (Rob Herring)
- Fix pci_alloc_irq_vectors_affinity() error return to allow "reduce
and retry" for drivers using IRQ sets (Ming Lei)
- Fix "pci=disable_acs_redir" initdata use-after-free problem (Logan
Gunthorpe)
* tag 'pci-v5.0-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix __initdata issue with "pci=disable_acs_redir" parameter
PCI/MSI: Return -ENOSPC from pci_alloc_irq_vectors_affinity()
PCI: Fix PCI kconfig menu organization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c fixes from Boris Brezillon:
- Fix the error check on master->sysclk val in the Cadence driver
- Fix reattach implementation in the Designware driver
* tag 'i3c/fixes-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: dw-i3c-master: fix i3c_attach/reattach
i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
|
|
Pull mtd fixes from Boris Brezillon:
"Raw NAND changes:
- jz4740: fix a compilation warning
- fsmc: fix a regression introduced by ->select_chip() deprecation
- denali: fix a regression introduced by NAND_KEEP_TIMINGS addition"
* tag 'mtd/fixes-for-5.0-rc3' of git://git.infradead.org/linux-mtd:
mtd: rawnand: denali: get ->setup_data_interface() working again
mtd: nand: jz4740: fix '__iomem *' vs. '* __iomem'
mtd: rawnand: fsmc: Keep bank enable bit set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"The cleanups for the way we handle type information introduced during
the merge window revealed that we'd been abusing the irq APIs for a
long time, causing breakage for systems.
This has a couple of minimal fixes for that which restore the previous
behaviour for the time being, we'll fix it properly for v5.1 but
that'd be a bit much to do as a bug fix"
* tag 'regmap-fix-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: do not write mask register if mask_base is zero
regmap: regmap-irq: silently ignore unsupported type settings
|
|
handling
The current code in __mdiobus_register() doesn't properly handle
failures returned by the devm_gpiod_get_optional() call: it returns
immediately, without unregistering the device that was added by the
call to device_register() earlier in the function.
This leaves a stale device, which then causes a NULL pointer
dereference in the code that handles deferred probing:
[ 1.489982] Unable to handle kernel NULL pointer dereference at virtual address 00000074
[ 1.498110] pgd = (ptrval)
[ 1.500838] [00000074] *pgd=00000000
[ 1.504432] Internal error: Oops: 17 [#1] SMP ARM
[ 1.509133] Modules linked in:
[ 1.512192] CPU: 1 PID: 51 Comm: kworker/1:3 Not tainted 4.20.0-00039-g3b73a4cc8b3e-dirty #99
[ 1.520708] Hardware name: Xilinx Zynq Platform
[ 1.525261] Workqueue: events deferred_probe_work_func
[ 1.530403] PC is at klist_next+0x10/0xfc
[ 1.534403] LR is at device_for_each_child+0x40/0x94
[ 1.539361] pc : [<c0683fbc>] lr : [<c0455d90>] psr: 200e0013
[ 1.545628] sp : ceeefe68 ip : 00000001 fp : ffffe000
[ 1.550863] r10: 00000000 r9 : c0c66790 r8 : 00000000
[ 1.556079] r7 : c0457d44 r6 : 00000000 r5 : ceeefe8c r4 : cfa2ec78
[ 1.562604] r3 : 00000064 r2 : c0457d44 r1 : ceeefe8c r0 : 00000064
[ 1.569129] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 1.576263] Control: 18c5387d Table: 0ed7804a DAC: 00000051
[ 1.582013] Process kworker/1:3 (pid: 51, stack limit = 0x(ptrval))
[ 1.588280] Stack: (0xceeefe68 to 0xceef0000)
[ 1.592630] fe60: cfa2ec78 c0c03c08 00000000 c0457d44 00000000 c0c66790
[ 1.600814] fe80: 00000000 c0455d90 ceeefeac 00000064 00000000 0d7a542e cee9d494 cfa2ec78
[ 1.608998] fea0: cfa2ec78 00000000 c0457d44 c0457d7c cee9d494 c0c03c08 00000000 c0455dac
[ 1.617182] fec0: cf98ba44 cf926a00 cee9d494 0d7a542e 00000000 cf935a10 cf935a10 cf935a10
[ 1.625366] fee0: c0c4e9b8 c0457d7c c0c4e80c 00000001 cf935a10 c0457df4 cf935a10 c0c4e99c
[ 1.633550] ff00: c0c4e99c c045a27c c0c4e9c4 ced63f80 cfde8a80 cfdebc00 00000000 c013893c
[ 1.641734] ff20: cfde8a80 cfde8a80 c07bd354 ced63f80 ced63f94 cfde8a80 00000008 c0c02d00
[ 1.649936] ff40: cfde8a98 cfde8a80 ffffe000 c0139a30 ffffe000 c0c6624a c07bd354 00000000
[ 1.658120] ff60: ffffe000 cee9e780 ceebfe00 00000000 ceeee000 ced63f80 c0139788 cf8cdea4
[ 1.666304] ff80: cee9e79c c013e598 00000001 ceebfe00 c013e44c 00000000 00000000 00000000
[ 1.674488] ffa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[ 1.682671] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.690855] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.699058] [<c0683fbc>] (klist_next) from [<c0455d90>] (device_for_each_child+0x40/0x94)
[ 1.707241] [<c0455d90>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88)
[ 1.716476] [<c0457d7c>] (device_reorder_to_tail) from [<c0455dac>] (device_for_each_child+0x5c/0x94)
[ 1.725692] [<c0455dac>] (device_for_each_child) from [<c0457d7c>] (device_reorder_to_tail+0x38/0x88)
[ 1.734927] [<c0457d7c>] (device_reorder_to_tail) from [<c0457df4>] (device_pm_move_to_tail+0x28/0x40)
[ 1.744235] [<c0457df4>] (device_pm_move_to_tail) from [<c045a27c>] (deferred_probe_work_func+0x58/0x8c)
[ 1.753746] [<c045a27c>] (deferred_probe_work_func) from [<c013893c>] (process_one_work+0x210/0x4fc)
[ 1.762888] [<c013893c>] (process_one_work) from [<c0139a30>] (worker_thread+0x2a8/0x5c0)
[ 1.771072] [<c0139a30>] (worker_thread) from [<c013e598>] (kthread+0x14c/0x154)
[ 1.778482] [<c013e598>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
[ 1.785689] Exception stack(0xceeeffb0 to 0xceeefff8)
[ 1.790739] ffa0: 00000000 00000000 00000000 00000000
[ 1.798923] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.807107] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.813724] Code: e92d47f0 e1a05000 e8900048 e1a00003 (e5937010)
[ 1.819844] ---[ end trace 3c2c0c8b65399ec9 ]---
The actual error that we had from devm_gpiod_get_optional() was
-EPROBE_DEFER, due to the GPIO being provided by a driver that is
probed later than the Ethernet controller driver.
To fix this, we simply add the missing device_del() invocation in the
error path.
Fixes: 69226896ad636 ("mdio_bus: Issue GPIO RESET to PHYs")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix "reference to nonexisting document" warnings.
Fixes: b255e500c8dc ("net: documentation: build a directory structure for drivers")
Signed-off-by: Otto Sabart <ottosabart@seberm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A couple of weeks of fixes.
There's one fix for an oops on Power9 machines with Open CAPI
adapters.
And a fix for probable memory corruption in some of the new NPU code,
caught by smatch though and not seen in the wild.
Plus a few other minor fixes.
There's one non-fix which is the perf_regs change. That was sent
during the merge window but I accidentally only merged the first of
two patches in the series. It's been in linux-next so hopefully
doesn't conflict with anything in acme's tree.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Breno Leitao,
Christian Lamparter, Christophe Leroy, Dan Carpenter, Frederic Barrat,
Greg Kurz, Jason A. Donenfeld, Madhavan Srinivasan"
* tag 'powerpc-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/syscalls: Fix syscall tracing
powerpc/pseries: Fix build break due to pnv_npu2_init()
powerpc/4xx/ocm: Fix fix for phys_addr_t printf warnings
powerpc/powernv/npu: Fix oops in pnv_try_setup_npu_table_group()
powerpc/tm: Limit TM code inside PPC_TRANSACTIONAL_MEM
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
powerpc/powernv/npu: Allocate enough memory in pnv_try_setup_npu_table_group()
powerpc/perf: Update perf_regs structure to include MMCRA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Several fixes for the Xen pvcalls drivers (1 fix for the backend and
8 for the frontend).
- A fix for a rather longstanding bug in the Xen sched_clock()
interface which led to weird time jumps when migrating the system.
- A fix for avoiding accesses to x2apic MSRs in Xen PV guests.
* tag 'for-linus-5.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix x86 sched_clock() interface for xen
pvcalls-front: fix potential null dereference
always clear the X2APIC_ENABLE bit for PV guest
pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock
xen/pvcalls: remove set but not used variable 'intf'
pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read
pvcalls-front: don't return error when the ring is full
pvcalls-front: properly allocate sk
pvcalls-front: don't try to free unallocated rings
pvcalls-front: read all data before closing the connection
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Zero-length DMA mapping in caam
- Invalidly mapping stack memory for DMA in talitos
- Use after free in cavium/nitrox
- Key parsing in authenc
- Undefined shift in sm3
- Bogus completion call in authencesn
- SHA support detection in caam"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sm3 - fix undefined shift by >= width of value
crypto: talitos - fix ablkcipher for CONFIG_VMAP_STACK
crypto: talitos - reorder code in talitos_edesc_alloc()
crypto: adiantum - initialize crypto_spawn::inst
crypto: cavium/nitrox - Use after free in process_response_list()
crypto: authencesn - Avoid twice completion call in decrypt path
crypto: caam - fix SHA support detection
crypto: caam - fix zero-length buffer DMA mapping
crypto: ccree - convert to use crypto_authenc_extractkeys()
crypto: bcm - convert to use crypto_authenc_extractkeys()
crypto: authenc - fix parsing key with misaligned rta_len
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI initialization ordering issue introduced in the 4.17
time frame and causing functional problems to appear on multiple
systems and fix some fallout of the recent change to enable building
kernels with ACPI support and without PCI.
Specifics:
- Restore the ACPI initialization ordering changed implicitly by the
module-level AML handling rework during the 4.17 development cycle
that caused the EC address space handler based on information from
ECDT to be set up before loading AML definition blocks, making it
effectively not accessible by AML on some systems that don't work
as expected any more (Rafael Wysocki).
- Add direct dependencies on PCI to Kconfig in multiple places for
code that depends on both ACPI and PCI, but the PCI dependency was
implicitly satisfied by the ACPI dependency before, to prevent
invalid configurations from being created, for example by
randconfig (Sinan Kaya)"
* tag 'acpi-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Look for ECDT EC after calling acpi_load_tables()
drivers: thermal: int340x_thermal: Make PCI dependency explicit
x86/intel/lpss: Make PCI dependency explicit
platform/x86: apple-gmux: Make PCI dependency explicit
platform/x86: intel_pmc: Make PCI dependency explicit
platform/x86: intel_ips: make PCI dependency explicit
vga-switcheroo: make PCI dependency explicit
ata: pata_acpi: Make PCI dependency explicit
ACPI / LPSS: Make PCI dependency explicit
|
|
Pull fbdev fixes from Bartlomiej Zolnierkiewicz:
- fix stack memory leak in omap2fb driver (Vlad Tsyrklevich)
- fix OF node name handling v4.20 regression in offb driver (Rob
Herring)
- convert CONFIG_FB_LOGO_CENTER config option added in v5.0-rc1 into a
kernel parameter (Peter Rosin)
* tag 'fbdev-v5.0-rc3' of git://github.com/bzolnier/linux:
fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line option
fbdev: offb: Fix OF node name handling
omap2fb: Fix stack memory disclosure
|
|
Pull drm update from Dave Airlie:
"Add nouveau TU102 (RTX 2080 Ti) support"
* tag 'drm-fixes-2019-01-18-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/core: recognise TU102
|
|
The cleaner thread usually takes care of delayed iputs, with the
exception of the btrfs_end_transaction_throttle path. Delaying iputs
means we are potentially delaying the eviction of an inode and it's
respective space. The cleaner thread only gets woken up every 30
seconds, or when we require space. If there are a lot of inodes that
need to be deleted we could induce a serious amount of latency while we
wait for these inodes to be evicted. So instead wakeup the cleaner if
it's not already awake to process any new delayed iputs we add to the
list. If we suddenly need space we will less likely be backed up
behind a bunch of inodes that are waiting to be deleted, and we could
possibly free space before we need to get into the flushing logic which
will save us some latency.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Delayed iputs means we can have final iputs of deleted inodes in the
queue, which could potentially generate a lot of pinned space that could
be free'd. So before we decide to commit the transaction for ENOPSC
reasons, run the delayed iputs so that any potential space is free'd up.
If there is and we freed enough we can then commit the transaction and
potentially be able to make our reservation.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we flip read-only before we initiate writeback on all dirty pages for
ordered extents we've created then we'll have ordered extents left over
on umount, which results in all sorts of bad things happening. Fix this
by making sure we wait on ordered extents if we have to do the aborted
transaction cleanup stuff.
generic/475 can produce this warning:
[ 8531.177332] WARNING: CPU: 2 PID: 11997 at fs/btrfs/disk-io.c:3856 btrfs_free_fs_root+0x95/0xa0 [btrfs]
[ 8531.183282] CPU: 2 PID: 11997 Comm: umount Tainted: G W 5.0.0-rc1-default+ #394
[ 8531.185164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[ 8531.187851] RIP: 0010:btrfs_free_fs_root+0x95/0xa0 [btrfs]
[ 8531.193082] RSP: 0018:ffffb1ab86163d98 EFLAGS: 00010286
[ 8531.194198] RAX: ffff9f3449494d18 RBX: ffff9f34a2695000 RCX:0000000000000000
[ 8531.195629] RDX: 0000000000000002 RSI: 0000000000000001 RDI:0000000000000000
[ 8531.197315] RBP: ffff9f344e930000 R08: 0000000000000001 R09:0000000000000000
[ 8531.199095] R10: 0000000000000000 R11: ffff9f34494d4ff8 R12:ffffb1ab86163dc0
[ 8531.200870] R13: ffff9f344e9300b0 R14: ffffb1ab86163db8 R15:0000000000000000
[ 8531.202707] FS: 00007fc68e949fc0(0000) GS:ffff9f34bd800000(0000)knlGS:0000000000000000
[ 8531.204851] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8531.205942] CR2: 00007ffde8114dd8 CR3: 000000002dfbd000 CR4:00000000000006e0
[ 8531.207516] Call Trace:
[ 8531.208175] btrfs_free_fs_roots+0xdb/0x170 [btrfs]
[ 8531.210209] ? wait_for_completion+0x5b/0x190
[ 8531.211303] close_ctree+0x157/0x350 [btrfs]
[ 8531.212412] generic_shutdown_super+0x64/0x100
[ 8531.213485] kill_anon_super+0x14/0x30
[ 8531.214430] btrfs_kill_super+0x12/0xa0 [btrfs]
[ 8531.215539] deactivate_locked_super+0x29/0x60
[ 8531.216633] cleanup_mnt+0x3b/0x70
[ 8531.217497] task_work_run+0x98/0xc0
[ 8531.218397] exit_to_usermode_loop+0x83/0x90
[ 8531.219324] do_syscall_64+0x15b/0x180
[ 8531.220192] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 8531.221286] RIP: 0033:0x7fc68e5e4d07
[ 8531.225621] RSP: 002b:00007ffde8116608 EFLAGS: 00000246 ORIG_RAX:00000000000000a6
[ 8531.227512] RAX: 0000000000000000 RBX: 00005580c2175970 RCX:00007fc68e5e4d07
[ 8531.229098] RDX: 0000000000000001 RSI: 0000000000000000 RDI:00005580c2175b80
[ 8531.230730] RBP: 0000000000000000 R08: 00005580c2175ba0 R09:00007ffde8114e80
[ 8531.232269] R10: 0000000000000000 R11: 0000000000000246 R12:00005580c2175b80
[ 8531.233839] R13: 00007fc68eac61c4 R14: 00005580c2175a68 R15:0000000000000000
Leaving a tree in the rb-tree:
3853 void btrfs_free_fs_root(struct btrfs_root *root)
3854 {
3855 iput(root->ino_cache_inode);
3856 WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
CC: stable@vger.kernel.org
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add stacktrace ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We weren't doing any of the accounting cleanup when we aborted
transactions. Fix this by making cleanup_ref_head_accounting global and
calling it from the abort code, this fixes the issue where our
accounting was all wrong after the fs aborts.
The test generic/475 on a 2G VM can trigger the problems eg.:
[ 8502.136957] WARNING: CPU: 0 PID: 11064 at fs/btrfs/extent-tree.c:5986 btrfs_free_block_grou +ps+0x3dc/0x410 [btrfs]
[ 8502.148372] CPU: 0 PID: 11064 Comm: umount Not tainted 5.0.0-rc1-default+ #394
[ 8502.150807] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626 +cc-prebuilt.qemu-project.org 04/01/2014
[ 8502.154317] RIP: 0010:btrfs_free_block_groups+0x3dc/0x410 [btrfs]
[ 8502.160623] RSP: 0018:ffffb1ab84b93de8 EFLAGS: 00010206
[ 8502.161906] RAX: 0000000001000000 RBX: ffff9f34b1756400 RCX: 0000000000000000
[ 8502.163448] RDX: 0000000000000002 RSI: 0000000000000001 RDI: ffff9f34b1755400
[ 8502.164906] RBP: ffff9f34b7e8c000 R08: 0000000000000001 R09: 0000000000000000
[ 8502.166716] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f34b7e8c108
[ 8502.168498] R13: ffff9f34b7e8c158 R14: 0000000000000000 R15: dead000000000100
[ 8502.170296] FS: 00007fb1cf15ffc0(0000) GS:ffff9f34bd400000(0000) knlGS:0000000000000000
[ 8502.172439] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8502.173669] CR2: 00007fb1ced507b0 CR3: 000000002f7a6000 CR4: 00000000000006f0
[ 8502.175094] Call Trace:
[ 8502.175759] close_ctree+0x17f/0x350 [btrfs]
[ 8502.176721] generic_shutdown_super+0x64/0x100
[ 8502.177702] kill_anon_super+0x14/0x30
[ 8502.178607] btrfs_kill_super+0x12/0xa0 [btrfs]
[ 8502.179602] deactivate_locked_super+0x29/0x60
[ 8502.180595] cleanup_mnt+0x3b/0x70
[ 8502.181406] task_work_run+0x98/0xc0
[ 8502.182255] exit_to_usermode_loop+0x83/0x90
[ 8502.183113] do_syscall_64+0x15b/0x180
[ 8502.183919] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Corresponding to
release_global_block_rsv() {
...
WARN_ON(fs_info->delayed_refs_rsv.reserved > 0);
CC: stable@vger.kernel.org
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add log dump ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This reverts commit e73e81b6d0114d4a303205a952ab2e87c44bd279.
This patch causes a few problems:
- adds latency to btrfs_finish_ordered_io
- as btrfs_finish_ordered_io is used for free space cache, generating
more work from btrfs_btree_balance_dirty_nodelay could end up in the
same workque, effectively deadlocking
12260 kworker/u96:16+btrfs-freespace-write D
[<0>] balance_dirty_pages+0x6e6/0x7ad
[<0>] balance_dirty_pages_ratelimited+0x6bb/0xa90
[<0>] btrfs_finish_ordered_io+0x3da/0x770
[<0>] normal_work_helper+0x1c5/0x5a0
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x46/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Transaction commit will wait on the freespace cache:
838 btrfs-transacti D
[<0>] btrfs_start_ordered_extent+0x154/0x1e0
[<0>] btrfs_wait_ordered_range+0xbd/0x110
[<0>] __btrfs_wait_cache_io+0x49/0x1a0
[<0>] btrfs_write_dirty_block_groups+0x10b/0x3b0
[<0>] commit_cowonly_roots+0x215/0x2b0
[<0>] btrfs_commit_transaction+0x37e/0x910
[<0>] transaction_kthread+0x14d/0x180
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
And then writepages ends up waiting on transaction commit:
9520 kworker/u96:13+flush-btrfs-1 D
[<0>] wait_current_trans+0xac/0xe0
[<0>] start_transaction+0x21b/0x4b0
[<0>] cow_file_range_inline+0x10b/0x6b0
[<0>] cow_file_range.isra.69+0x329/0x4a0
[<0>] run_delalloc_range+0x105/0x3c0
[<0>] writepage_delalloc+0x119/0x180
[<0>] __extent_writepage+0x10c/0x390
[<0>] extent_write_cache_pages+0x26f/0x3d0
[<0>] extent_writepages+0x4f/0x80
[<0>] do_writepages+0x17/0x60
[<0>] __writeback_single_inode+0x59/0x690
[<0>] writeback_sb_inodes+0x291/0x4e0
[<0>] __writeback_inodes_wb+0x87/0xb0
[<0>] wb_writeback+0x3bb/0x500
[<0>] wb_workfn+0x40d/0x610
[<0>] process_one_work+0x1ee/0x5a0
[<0>] worker_thread+0x1e0/0x3d0
[<0>] kthread+0xf5/0x130
[<0>] ret_from_fork+0x24/0x30
[<0>] 0xffffffffffffffff
Eventually, we have every process in the system waiting on
balance_dirty_pages(), and nobody is able to make progress on page
writeback.
The original patch tried to fix an OOM condition, that happened on 4.4 but no
success reproducing that on later kernels (4.19 and 4.20). This is more likely
a problem in OOM itself.
Link: https://lore.kernel.org/linux-btrfs/20180528054821.9092-1-ethanlien@synology.com/
Reported-by: Chris Mason <clm@fb.com>
CC: stable@vger.kernel.org # 4.18+
CC: ethanlien <ethanlien@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When building and have fragment CONFIG_NO_IOPORT_MAP enabled then the
following warning:
../drivers/misc/pvpanic.c: In function ‘pvpanic_walk_resources’:
../drivers/misc/pvpanic.c:73:10: error: implicit declaration of
function ‘ioport_map’; did you mean ‘ioremap’?
[-Werror=implicit-function-declaration]
base = ioport_map(r.start, resource_size(&r));
^~~~~~~~~~
Since commmit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without
CONFIG_PCI set"), its now possible to have ACPI enabled without haveing
PCI enabled. However, the pvpanic driver depends on HAS_IOPORT_MAP or
HAVE_IOREMAP_PROT when ACPI is enabled. It was fine until
commit 725eba2928ad ("misc/pvpanic: add MMIO support") got added.
Rework so that we do a extra check ifdef CONFIG_HAS_IOPORT_MAP.
Fixes: 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ipcnum is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/char/mwave/mwavedd.c:299 mwave_ioctl() warn: potential spectre issue 'pDrvData->IPCs' [w] (local cap)
Fix this by sanitizing ipcnum before using it to index pDrvData->IPCs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The way we allocate events works fine in most cases, except
when multiple PCI devices share an ITS-visible DevID, and that
one of them is trying to use MultiMSI allocation.
In that case, our allocation is not guaranteed to be zero-based
anymore, and we have to make sure we allocate it on a boundary
that is compatible with the PCI Multi-MSI constraints.
Fix this by allocating the full region upfront instead of iterating
over the number of MSIs. MSI-X are always allocated one by one,
so this shouldn't change anything on that front.
Fixes: b48ac83d6bbc2 ("irqchip: GICv3: ITS: MSI support")
Cc: stable@vger.kernel.org
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.0
Quite a big batch of fixes here. There's a couple of things going on,
the main one is that we found some issues with not deferring probe when
we should, causing us to skip some driver initialization. The fixes for
this then in turn exposed some issues with how we were searching for
components which had previously gone unnoticed due to the original
issue.
There's also been the normal driver specific stuff and there's been what
looks like several batches of automated scanning for issues which have
generated quite a large set of smaller fixes for potential crashes and
missed error handling.
|
|
There is a potential NULL pointer dereference in case kzalloc()
fails and returns NULL.
Fix this by adding a NULL check on *session*
Also, update the function header with information about the
expected return on failure and remove unnecessary variable rc.
This issue was detected with the help of Coccinelle.
Fixes: 0eca353e7ae7 ("misc: IBM Virtual Management Channel Driver (VMC)")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix to return a negative error code -ENOMEM from the new_inode() and
d_make_root() error handling cases instead of 0, as done elsewhere in
this function.
Fixes: 849d540ddfcd ("binderfs: implement "max" mount option")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Christian Brauner <christian@brauner.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When CONFIG_VGACON_SOFT_SCROLLBACK is selected, the VGA display memory
index and vc_visible_origin don't change when scrollback is activated.
The actual screen content is saved away and the scrollbackdata is copied
over it. However the vt code, and /dev/vcs devices in particular, still
expect vc_origin to always point at the actual screen content not the
displayed scrollback content.
So adjust vc_origin to point at the saved screen content when scrollback
is active and set it back to vc_visible_origin when restoring the screen.
This fixes /dev/vcsa<n> that return scrollback content when they
shouldn't (onli /dev/vcsa without a number should), and also fixes
/dev/vcsu that should return scrollback content when scrollback is
active but currently doesn't.
An unnecessary call to vga_set_mem_top() is also removed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
User space using poll() on /dev/vcs devices are not awaken when a
screen size change occurs. Let's fix that.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Every invocation of notify_write() and notify_update() is performed
under the console lock, except for one case. Let's fix that.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When kernel messages are printed to the console, they appear blank on
the unicode screen. This is because vt_console_print() is lacking a call
to vc_uniscr_putc(). However the later function assumes vc->vc_x is
always up to date when called, which is not the case here as
vt_console_print() uses it to mark the beginning of the display update.
This patch reworks (and simplifies) vt_console_print() so that vc->vc_x
is always valid and keeps the start of display update in a local variable
instead, which finally allows for adding the missing vc_uniscr_putc()
call.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix __might_sleep warning[1] in tty/n_hdlc.c read due to copy_to_user
call while current is TASK_INTERRUPTIBLE. This is a false positive
since the code path does not depend on current state remaining
TASK_INTERRUPTIBLE. The loop breaks out and sets TASK_RUNNING after
calling copy_to_user.
This patch supresses the warning by setting TASK_RUNNING before calling
copy_to_user.
[1] https://syzkaller.appspot.com/bug?id=17d5de7f1fcab794cb8c40032f893f52de899324
Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Reported-by: syzbot <syzbot+c244af085a0159d22879@syzkaller.appspotmail.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@vger.kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The initialization code of interrupt backoff work might reference NULL
pointer and cause the following crash, if no port was found.
[ 10.017727] CPU 0 Unable to handle kernel paging request at virtual address 000001b0, epc == 807088e0, ra == 8070863c
---- snip ----
[ 11.704470] [<807088e0>] serial8250_register_8250_port+0x318/0x4ac
[ 11.747251] [<80708d74>] serial8250_probe+0x148/0x1c0
[ 11.789301] [<80728450>] platform_drv_probe+0x40/0x94
[ 11.830515] [<807264f8>] really_probe+0xf8/0x318
[ 11.870876] [<80726b7c>] __driver_attach+0x110/0x12c
[ 11.910960] [<80724374>] bus_for_each_dev+0x78/0xcc
[ 11.951134] [<80725958>] bus_add_driver+0x200/0x234
[ 11.989756] [<807273d8>] driver_register+0x84/0x148
[ 12.029832] [<80d72f84>] serial8250_init+0x138/0x198
[ 12.070447] [<80100e6c>] do_one_initcall+0x5c/0x2a0
[ 12.110104] [<80d3a208>] kernel_init_freeable+0x370/0x484
[ 12.150722] [<80a49420>] kernel_init+0x10/0xf8
[ 12.191517] [<8010756c>] ret_from_kernel_thread+0x14/0x1c
This patch makes sure the initialization code can be reached only if a port
is found.
Fixes: 6d7f677a2afa ("serial: 8250: Rate limit serial port rx interrupts during input overruns")
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We were experiencing a crash similar to the one reported as part of
commit:a5ba1d95e46e ("uart: fix race between uart_put_char() and
uart_shutdown()") in our testbed as well. We continue to observe the same
crash after integrating the commit a5ba1d95e46e ("uart: fix race between
uart_put_char() and uart_shutdown()")
On reviewing the change, the port lock should be taken prior to checking for
if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer
uart_state->xmit.
Traceback:
[11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference
at virtual address 0000003b
[11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180
[11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120
[11/27/2018 06:24:32.4950] pc : [<ffffffc0002e6808>]
lr : [<ffffffc0003747cc>] pstate: 000001c5
[11/27/2018 06:24:32.4950] sp : ffffffc076433d30
[11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140
[11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580
[11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140
[11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000
[11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076
[11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000
[11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68
[11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948
[11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333
[11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131
[11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070
[11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b
[11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008
[11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e
[11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b
[11/27/2018 06:24:32.4950] CPU2: stopping
[11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P D O 4.1.51 #3
[11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT)
[11/27/2018 06:24:32.4950] Call trace:
[11/27/2018 06:24:32.4950] [<ffffffc0000883b8>] dump_backtrace+0x0/0x150
[11/27/2018 06:24:32.4950] [<ffffffc00008851c>] show_stack+0x14/0x20
[11/27/2018 06:24:32.4950] [<ffffffc0005ee810>] dump_stack+0x90/0xb0
[11/27/2018 06:24:32.4950] [<ffffffc00008e844>] handle_IPI+0x18c/0x1a0
[11/27/2018 06:24:32.4950] [<ffffffc000080c68>] gic_handle_irq+0x88/0x90
Fixes: a5ba1d95e46e ("uart: fix race between uart_put_char() and uart_shutdown()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Samir Virmani <samir@embedur.com>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.0-rc3
Here's a fix for the new ftdi gpio support, which failed to take
autosuspend into account, and a patch adding missing SPDX identifiers to
the keyspan headers.
Included are also some new device ids.
All but the SPDX patch have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
* tag 'usb-serial-5.0-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: keyspan_usa: add proper SPDX lines for .h files
USB: serial: pl2303: add new PID to support PL2303TB
USB: serial: ftdi_sio: fix GPIO not working in autosuspend
USB: serial: simple: add Motorola Tetra TPG2200 device id
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus
Kishon writes:
phy: for 5.0 -rc
*) Fix de-reference before null check in TI's phy-gmii-sel driver
*) Fix build breakage in AHCI platform driver (patch was merged in AHCI
before dependent patches were merged in PHY layer)
*) Fix the power on error path in ath79-usb PHY driver
*) Fix the reset binding name to match the DT binding documentation in
ath79-usb PHY driver.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.0-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy:
phy: ath79-usb: Fix the main reset name to match the DT binding
phy: ath79-usb: Fix the power on error path
phy: fix build breakage: add PHY_MODE_SATA
phy: ti: ensure priv is not null before dereferencing it
|
|
* acpi-pci:
drivers: thermal: int340x_thermal: Make PCI dependency explicit
x86/intel/lpss: Make PCI dependency explicit
platform/x86: apple-gmux: Make PCI dependency explicit
platform/x86: intel_pmc: Make PCI dependency explicit
platform/x86: intel_ips: make PCI dependency explicit
vga-switcheroo: make PCI dependency explicit
ata: pata_acpi: Make PCI dependency explicit
ACPI / LPSS: Make PCI dependency explicit
|
|
The keyspan_usa??msg.h files are under a BSD-3 style license, so
properly label them as such with a SPDX line at the top of the file.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When CONFIG_NO_AUTO_INLINE was present in linux-next (which added
'-fno-inline-functions' to KBUILD_CFLAGS), an allyesconfig build with
Clang failed at the modpost stage:
ERROR: "is_broadcast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
ERROR: "is_zero_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
ERROR: "is_multicast_mac_addr" [drivers/staging/rtl8723bs/r8723bs.ko] undefined!
These functions were marked as extern inline, meaning that if inlining
doesn't happen, the function will be undefined, as it is above.
This happens to work with GCC because the '-fno-inline-functions' option
respects the __inline attribute so all instances of these functions are
inlined as expected and the definition doesn't actually matter. However,
with Clang and '-fno-inline-functions', a function has to be marked with
the __always_inline attribute to be considered for inlining, which none
of these functions are. Clang tries to find the symbol definition
elsewhere as it was told and fails, which trickles down to modpost.
To make sure that this code compiles regardless of compiler and make the
intention of the code clearer, use 'static' to ensure these functions
are always defined, regardless of inlining. Additionally, silence a
checkpatch warning by switching from '__inline' to 'inline'.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to
nand_controller_ops") missed to invert the if-conditonal for denali.
Since then, the Denali NAND driver cannnot invoke setup_data_interface.
Fixes: 7a08dbaedd36 ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
|
|
The function jz_nand_ioremap_resource() needs a pointer to an __iomem
pointer as its last argument but this argument is declared as:
void * __iomem *base
Fix this by using the correct declaration:
void __iomem **base
which then also removes the following Sparse's warnings:
282:15: warning: incorrect type in assignment (different address spaces)
282:15: expected void *[noderef] <asn:2>
282:15: got void [noderef] <asn:2> *
322:57: warning: incorrect type in argument 4 (different address spaces)
322:57: expected void *[noderef] <asn:2> *base
322:57: got void [noderef] <asn:2> **
402:67: warning: incorrect type in argument 4 (different address spaces)
402:67: expected void *[noderef] <asn:2> *base
402:67: got void [noderef] <asn:2> **
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
|
|
This fixes autoloading the module by the OF compatible string.
Fixes: 813e18b18a87 ("USB: EHCI: ehci-mv: add DT support")
Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The patch "usb: simplify usbport trigger" together with "leds: triggers:
add device attribute support" caused an regression for the usbport
trigger. it will no longer enumerate any active usb hub ports under the
"ports" directory in the sysfs class directory, if the usb host drivers
are fully initialized before the usbport trigger was loaded.
The reason is that the usbport driver tries to register the sysfs
entries during the activate() callback. And this will fail with -2 /
ENOENT because the patch "leds: triggers: add device attribute support"
made it so that the sysfs "ports" group was only being added after the
activate() callback succeeded.
This version of the patch reverts parts of the "usb: simplify usbport
trigger" patch and restores usbport trigger's functionality.
Fixes: 6f7b0bad8839 ("usb: simplify usbport trigger")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During the static checker, "data->usbmisc_data" may be NULL.
Fix it by adding this pointer judgement before using.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update email address in MAINTAINERS entries.
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The README file ni the drivers/usb/usbip/ directory is not needed
anymore, so just delete it.
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v5.0-rc2
Few minor bug fixes on dwc3: adding a missing synchronize_irq() to
prevent a very rare spurious interrupt during suspend; clearing
needs_extra_trb flag to prevent it from being left erroneously set and
confusing the driver when the request is recycled; initializing
link_to a sensible default during init.
Apart from these, one minor fix on dwc2 and another on f_sourcesink.c
* tag 'fixes-for-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
usb: gadget: Potential NULL dereference on allocation error
usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
usb: dwc3: gadget: synchronize_irq dwc irq in suspend
|
