summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-15drm/amd/display: Re-enable DPP/HUBP Power GatingDaniel Miess
[Why & How] Bugs preventing DPP/HUBP power gating have been addressed so this should be reenabled on dcn314 for sufficient hardware rev versions Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: SubVP high refresh only if all displays >= 120hzAlvin Lee
[Description] - SubVP high refresh should only be enabled if all displays are >= 120hz. We do not want to accidentally enables configs such as 60hz[SubVP] + 120hz[SubVP] - Ensure that the SubVP config generation code does not produce configs such as 60hz[SubVP] + 120hz[SubVP] - Also add admissibility checks to ensure these configs do not pass as valid configs Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Dillon Varone <Dillon.Varone@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Fix disbling PSR slow response issueTom Chung
[Why] dmub_psr_get_state() return an invalid PSR state while disable the PSR because convert_psr_state() doesn't recognize the state that return from DMCUB. [How] Add a PSR state to make the dmub_psr_get_state() return a correct PSR state. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: fix the system hang while disable PSRTom Chung
[Why] When the PSR enabled. If you try to adjust the timing parameters, it may cause system hang. Because the timing mismatch with the DMCUB settings. [How] Disable the PSR before adjusting timing parameters. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Promote DAL to 3.2.238Aric Cyr
Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Add Error Code for Dml Validation FailureFangzhi Zuo
Any invalid mode from hw perspective should be given corresponding error code, otherwise it leads to confusing warning message "[drm] Mode Validation Warning: Validation OK failed validation." Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Add DP2 MetricsAustin Zheng
Why: Log DP2 data to be used for debugging purposes How: Check the reported link rate of the DP connection and translate it to the DP version. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Austin Zheng <austin.zheng@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: add debugfs for allow_edp_hotplug_detectionHersen Wu
[Why] within dc_link_detect, edp edid is read only for the first time and saved. edid will not be read after the first time read. to run edp edid read test, need read edp edid for each dc_link_detect. dc->config flag allow_edp_hotplug_detection could be used for edp edid test. [How] add debugfs for dc->config.allow_edp_hotplug_detection Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: edp do not add non-edid timingsHersen Wu
[Why] most edp support only timings from edid. applying non-edid timings, especially those timings out of edp bandwidth, may damage edp. [How] do not add non-edid timings for edp. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15Revert "drm/amdgpu: remove TOPDOWN flags when allocating VRAM in large bar ↵Arunpravin Paneer Selvam
system" This reverts commit c105518679b6e87232874ffc989ec403bee59664. This patch disables the TOPDOWN flag for APU and few dGPU cards which has the VRAM size equal to the BAR size. When we enable the TOPDOWN flag, we get the free blocks at the highest available memory region and we don't split the lower order blocks. This change is required to keep off the fragmentation related issues particularly in ASIC which has VRAM space <= 500MiB Hence, we are reverting this patch. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2270 Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amdgpu: expose num_hops and num_links xgmi info through dev attrShiwu Zhang
Add these two dev attrs for xgmi info details which is helpful for developers checking the xgmi topology by catting the sys file directly. Take 4 cards with xgmi connection as an example, get the num_hops for each device or node through xmig_hive_info dir like, cat /sys/bus/pci/devices/0000:41:00.0/xgmi_hive_info/node1/num_hops will return "00 41 41 41" where "00" stands for the hops to node1 itself and "41" is the hops in hex format to every other node in the same hive. There are node1/node2/node3/node4 representing 4 cards in the hive. The same for num_links dev attr. Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com> Acked-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amdgpu: vcn_4_0 set instance 0 init sched score to 1Sonny Jiang
Only vcn0 can process AV1 codecx. In order to use both vcn0 and vcn1 in h264/265 transcode to AV1 cases, set vcn0 sched score to 1 at initialization time. Signed-off-by: Sonny Jiang <sonjiang@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/radeon: Disable outputs when releasing fbdev clientThomas Zimmermann
Disable the modesetting pipeline before release the radeon's fbdev client. Fixes the following error: [ 17.217408] WARNING: CPU: 5 PID: 1464 at drivers/gpu/drm/ttm/ttm_bo.c:326 ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217418] Modules linked in: edac_mce_amd radeon(+) drm_ttm_helper ttm video drm_suballoc_helper drm_display_helper kvm irqbypass drm_kms_helper syscopyarea crc32_pclmul sysfillrect sha512_ssse3 sysimgblt sha512_generic cfbfillrect cfbimgblt wmi_bmof aesni_intel cfbcopyarea crypto_simd cryptd k10temp acpi_cpufreq wmi dm_mod [ 17.217432] CPU: 5 PID: 1464 Comm: systemd-udevd Not tainted 6.4.0-rc4+ #1 [ 17.217436] Hardware name: Micro-Star International Co., Ltd. MS-7A38/B450M PRO-VDH MAX (MS-7A38), BIOS B.G0 07/26/2022 [ 17.217438] RIP: 0010:ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217444] Code: 48 89 43 38 48 89 43 40 48 8b 5c 24 30 48 8b b5 40 08 00 00 48 8b 6c 24 38 48 83 c4 58 e9 7a 49 f7 e0 48 89 ef e9 6c fe ff ff <0f> 0b 48 83 7b 20 00 0f 84 b7 fd ff ff 0f 0b 0f 1f 00 e9 ad fd ff [ 17.217448] RSP: 0018:ffffc9000095fbb0 EFLAGS: 00010202 [ 17.217451] RAX: 0000000000000001 RBX: ffff8881052c8de0 RCX: 0000000000000000 [ 17.217453] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8881052c8de0 [ 17.217455] RBP: ffff888104a66e00 R08: ffff8881052c8de0 R09: ffff888104a7cf08 [ 17.217457] R10: ffffc9000095fbe0 R11: ffffc9000095fbe8 R12: ffff8881052c8c78 [ 17.217458] R13: ffff8881052c8c78 R14: dead000000000100 R15: ffff88810528b108 [ 17.217460] FS: 00007f319fcbb8c0(0000) GS:ffff88881a540000(0000) knlGS:0000000000000000 [ 17.217463] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 17.217464] CR2: 000055dc8b0224a0 CR3: 000000010373d000 CR4: 0000000000750ee0 [ 17.217466] PKRU: 55555554 [ 17.217468] Call Trace: [ 17.217470] <TASK> [ 17.217472] ? __warn+0x97/0x160 [ 17.217476] ? ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217481] ? report_bug+0x1ec/0x200 [ 17.217487] ? handle_bug+0x3c/0x70 [ 17.217490] ? exc_invalid_op+0x1f/0x90 [ 17.217493] ? preempt_count_sub+0xb5/0x100 [ 17.217496] ? asm_exc_invalid_op+0x16/0x20 [ 17.217500] ? ttm_bo_release+0x27e/0x2d0 [ttm] [ 17.217505] ? ttm_resource_move_to_lru_tail+0x1ab/0x1d0 [ttm] [ 17.217511] radeon_bo_unref+0x1a/0x30 [radeon] [ 17.217547] radeon_gem_object_free+0x20/0x30 [radeon] [ 17.217579] radeon_fbdev_fb_destroy+0x57/0x90 [radeon] [ 17.217616] unregister_framebuffer+0x72/0x110 [ 17.217620] drm_client_dev_unregister+0x6d/0xe0 [ 17.217623] drm_dev_unregister+0x2e/0x90 [ 17.217626] drm_put_dev+0x26/0x90 [ 17.217628] pci_device_remove+0x44/0xc0 [ 17.217631] really_probe+0x257/0x340 [ 17.217635] __driver_probe_device+0x73/0x120 [ 17.217638] driver_probe_device+0x2c/0xb0 [ 17.217641] __driver_attach+0xa0/0x150 [ 17.217643] ? __pfx___driver_attach+0x10/0x10 [ 17.217646] bus_for_each_dev+0x67/0xa0 [ 17.217649] bus_add_driver+0x10e/0x210 [ 17.217651] driver_register+0x5c/0x120 [ 17.217653] ? __pfx_radeon_module_init+0x10/0x10 [radeon] [ 17.217681] do_one_initcall+0x44/0x220 [ 17.217684] ? kmalloc_trace+0x37/0xc0 [ 17.217688] do_init_module+0x64/0x240 [ 17.217691] __do_sys_finit_module+0xb2/0x100 [ 17.217694] do_syscall_64+0x3b/0x90 [ 17.217697] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 17.217700] RIP: 0033:0x7f319feaa5a9 [ 17.217702] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 08 0d 00 f7 d8 64 89 01 48 [ 17.217706] RSP: 002b:00007ffc6bf3e7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 17.217709] RAX: ffffffffffffffda RBX: 00005607204f3170 RCX: 00007f319feaa5a9 [ 17.217710] RDX: 0000000000000000 RSI: 00007f31a002eefd RDI: 0000000000000018 [ 17.217712] RBP: 00007f31a002eefd R08: 0000000000000000 R09: 00005607204f1860 [ 17.217714] R10: 0000000000000018 R11: 0000000000000246 R12: 0000000000020000 [ 17.217716] R13: 0000000000000000 R14: 0000560720522450 R15: 0000560720255899 [ 17.217718] </TASK> [ 17.217719] ---[ end trace 0000000000000000 ]--- The buffer object backing the fbdev emulation got pinned twice: by the fb_probe helper radeon_fbdev_create_pinned_object() and the modesetting code when the framebuffer got displayed. It only got unpinned once by the fbdev helper radeon_fbdev_destroy_pinned_object(). Hence TTM's BO- release function complains about the pin counter. Forcing the outputs off also undoes the modesettings pin increment. Tested-by: Borislav Petkov (AMD) <bp@alien8.de> Reported-by: Borislav Petkov <bp@alien8.de> Closes: https://lore.kernel.org/dri-devel/20230603174814.GCZHt83pN+wNjf63sC@fat_crate.local/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: e317a69fe891 ("drm/radeon: Implement client-based fbdev emulation") Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/amdgpu: enable W=1 for amdgpuHamza Mahfooz
We have a clean build with W=1 as of commit c168feed5d03 ("drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef"). So, let's enable these checks unconditionally for the entire module to catch these errors during development. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amdgpu: Fix kdoc warningSrinivasan Shanmugam
Fixes the following gcc with W=1: drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * EEPROM Table structure v1 drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:98: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * EEPROM Table structrue v2.1 Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Enable dcn314 DPP RCODaniel Miess
[Why and How] Add back debug bits enabling RCO for dcn314 as underflow associated with this change has been resolved Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amdgpu: Rename DRM schedulers in amdgpu TTMMukul Joshi
Rename mman.entity to mman.high_pr to make the distinction clearer that this is a high priority scheduler. Similarly, rename the recently added mman.delayed to mman.low_pr to make it clear it is a low priority scheduler. No functional change in this patch. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move SYNAPTICS_DEVICE_ID into ↵Lee Jones
CONFIG_DRM_AMD_DC_DCN ifdef Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:48:22: warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15drm/amd/display: Skip DPP DTO update if root clock is gatedNicholas Kazlauskas
[Why] Hardware implements root clock gating by utilizing the DPP DTO registers with a special case of DTO enabled, phase = 0, modulo = 1. This conflicts with our policy to always update the DPPDTO for cases where it's expected to be disabled. The pipes unexpectedly enter a higher power state than expected because of this programming flow. [How] Guard the upper layers of HWSS against this hardware quirk with programming the register with an internal state flag in DCCG. While technically acting as global state for the DCCG, HWSS shouldn't be expected to understand the hardware quirk for having DTO disabled causing more power than DTO enabled with this specific setting. This also prevents sequencing errors from occuring in the future if we have to program DPP DTO in multiple locations. Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Jun Lei <jun.lei@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-06-15sfc: fix XDP queues mode with legacy IRQÍñigo Huguet
In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not changed to a proper default value. This was leading to the driver thinking that it has dedicated XDP queues, when it didn't. Fix it by setting xdp_txq_queues_mode to the correct value if the driver fallbacks to MSI or legacy IRQ mode. The correct value is EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues. The issue can be easily visible if the kernel is started with pci=nomsi, then a call trace is shown. It is not shown only with sfc's modparam interrupt_mode=2. Call trace example: WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc] [...skip...] Call Trace: <TASK> efx_set_channels+0x5c/0xc0 [sfc] efx_probe_nic+0x9b/0x15a [sfc] efx_probe_all+0x10/0x1a2 [sfc] efx_pci_probe_main+0x12/0x156 [sfc] efx_pci_probe_post_io+0x18/0x103 [sfc] efx_pci_probe.cold+0x154/0x257 [sfc] local_pci_probe+0x42/0x80 Fixes: 6215b608a8c4 ("sfc: last resort fallback for lack of xdp tx queues") Reported-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15net: macsec: fix double free of percpu statsFedor Pchelkin
Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and macsec->stats on some of the memory allocation failure paths. However, the net_device is already registered to that moment: in macsec_newlink(), just before calling macsec_add_dev(). This means that during unregister process its priv_destructor - macsec_free_netdev() - will be called and will free the stats again. Remove freeing percpu stats inside macsec_add_dev() because macsec_free_netdev() will correctly free the already allocated ones. The pointers to unallocated stats stay NULL, and free_percpu() treats that correctly. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15drm/msm/dp: Free resources after unregistering themBjorn Andersson
The DP component's unbind operation walks through the submodules to unregister and clean things up. But if the unbind happens because the DP controller itself is being removed, all the memory for those submodules has just been freed. Change the order of these operations to avoid the many use-after-free that otherwise happens in this code path. Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542166/ Link: https://lore.kernel.org/r/20230612220259.1884381-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dp: Drop aux devices together with DP controllerBjorn Andersson
Using devres to depopulate the aux bus made sure that upon a probe deferral the EDP panel device would be destroyed and recreated upon next attempt. But the struct device which the devres is tied to is the DPUs (drm_dev->dev), which may be happen after the DP controller is torn down. Indications of this can be seen in the commonly seen EDID-hexdump full of zeros in the log, or the occasional/rare KASAN fault where the panel's attempt to read the EDID information causes a use after free on DP resources. It's tempting to move the devres to the DP controller's struct device, but the resources used by the device(s) on the aux bus are explicitly torn down in the error path. The KASAN-reported use-after-free also remains, as the DP aux "module" explicitly frees its devres-allocated memory in this code path. As such, explicitly depopulate the aux bus in the error path, and in the component unbind path, to avoid these issues. Fixes: 2b57f726611e ("drm/msm/dp: fix aux-bus EP lifetime") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/542163/ Link: https://lore.kernel.org/r/20230612220106.1884039-1-quic_bjorande@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm: provide fb_dirty implemenationDmitry Baryshkov
Since commit 93e81e38e197 ("drm/fb_helper: Minimize damage-helper overhead") the drm_fb_helper_funcs::fb_dirty helper is required for proper dirty/damage processing. The drm/msm driver requires that to function to let CMD panels to work. Use simplified version of drm_fbdev_generic_helper_fb_dirty() to fix support for CMD mode panels. Reported-by: Degdag Mohamed <degdagmohamed@gmail.com> Fixes: 93e81e38e197 ("drm/fb_helper: Minimize damage-helper overhead") Cc: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/542002/ Link: https://lore.kernel.org/r/20230612031616.3620134-1-dmitry.baryshkov@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: Remove incorrect references to slice_countJessica Zhang
Currently, slice_count is being used to calculate word count and pkt_per_line. Instead, these values should be calculated using slice per packet, which is not the same as slice_count. Slice count represents the number of slices per interface, and its value will not always match that of slice per packet. For example, it is possible to have cases where there are multiple slices per interface but the panel specifies only one slice per packet. Thus, use the default value of one slice per packet and remove slice_count from the aforementioned calculations. Fixes: 08802f515c3c ("drm/msm/dsi: Add support for DSC configuration") Fixes: bc6b6ff8135c ("drm/msm/dsi: Use DSC slice(s) packet size to compute word count") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541965/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-5-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Set DATA_COMPRESS on command mode for DCE/DSC 1.2Jessica Zhang
Add a DPU INTF op to set the DCE_DATA_COMPRESS bit to enable the DCE/DSC 1.2 datapath Note: For now, this op is called for command mode encoders only. Changes to set DATA_COMPRESS for video mode encoders will be posted along with DSC v1.2 support for DP. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/541966/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-4-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Add DPU_INTF_DATA_COMPRESS feature flag for DPU >= 7.0Jessica Zhang
In DPU 7.x and later, DSC/DCE enablement registers have been moved from PINGPONG to INTF. Thus, add a DPU_INTF_DATA_COMPRESS feature flag that will be set if the DATA_COMPRESS register is in the INTF block. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541967/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-3-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: Reduce pclk rate for compressionJessica Zhang
Adjust the pclk rate to divide hdisplay by the compression ratio when DSC is enabled. Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541972/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-2-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15msm/drm/dsi: Round up DSC hdisplay calculationJessica Zhang
Currently, when compression is enabled, hdisplay is reduced via integer division. This causes issues for modes where the original hdisplay is not a multiple of 3. To fix this, use DIV_ROUND_UP to divide hdisplay. Suggested-by: Marijn Suijten <marijn.suijten@somainline.org> Fixes: 08802f515c3cf ("drm/msm/dsi: Add support for DSC configuration") Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/541970/ Link: https://lore.kernel.org/r/20230405-add-dsc-support-v6-1-95eab864d1b6@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsetsAbhinav Kumar
Add DSC 1.2 hardware blocks to the catalog with necessary sub-block and feature flag information. Each display compression engine (DCE) contains dual DSC encoders so both share same base address but with its own different sub block address. changes in v4: -- delete DPU_DSC_HW_REV_1_1 -- re arrange sc8280xp_dsc[] changes in v4: -- fix checkpatch warning changes in v10: -- remove hard slice from commit text -- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN -- change DSC_BLK_1_2 .len from 0x100 to 0x29c changes in v11: -- remove comment at DSC_BLK_1_2 marco Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/539507/ Link: https://lore.kernel.org/r/1685036458-22683-10-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: add support for DSC encoder v1.2 engineKuogee Hsieh
Add support for DSC 1.2 by providing the necessary hooks to program the DPU DSC 1.2 encoder. Changes in v3: -- fixed kernel test rebot report that "__iomem *off" is declared but not used at dpu_hw_dsc_config_1_2() -- unrolling thresh loops Changes in v4: -- delete DPU_DSC_HW_REV_1_1 -- delete off and used real register name directly Changes in v7: -- replace offset with sblk->enc.base -- replace ss with slice Changes in v8: -- fixed checkpatch warning Changes in v9: -- replaced __dsc_calc_ob_max_addr() with __dsc_calc_output_buf_max_addr() -- replaced variable num_ss with num_softslice -- remove inline from function declaration changes in v10: -- rewording text of changes in v9 -- replace DPU_DSC_NATIVE_422_EN with DPU_DSC_NATIVE_42x_EN -- replace drm_dsc_calculate_flatness_det_thresh() with drm_dsc_flatness_det_thresh() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Patchwork: https://patchwork.freedesktop.org/patch/539500/ Link: https://lore.kernel.org/r/1685036458-22683-7-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: update hdisplay calculation for dsi_timing_setupJessica Zhang
Currently, hdisplay is being divided by 3 for DSC. However, this calculation only works for cases where BPP = 8. Update hdisplay calculation to be bytes_per_line / 3, so that it accounts for cases where BPP != 8. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539271/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-9-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: Use MSM and DRM DSC helper methodsJessica Zhang
Use MSM and DRM DSC helper methods to configure DSC for DSI. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539274/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-8-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Fix slice_last_group_size calculationJessica Zhang
Correct the math for slice_last_group_size so that it matches the calculations downstream. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539269/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-7-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatnessJessica Zhang
The current dpu_hw_dsc calculation for det_thresh_flatness does not match the downstream calculation or the DSC spec. Use the DRM DSC helper for det_thresh_flatness to match downstream implementation and the DSC spec. Fixes: c110cfd1753e ("drm/msm/disp/dpu1: Add support for DSC") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539275/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-6-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm: Add MSM-specific DSC helper methodsJessica Zhang
Introduce MSM-specific DSC helper methods, as some calculations are common between DP and DSC. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539272/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-5-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dsi: use DRM DSC helpers for DSC setupDmitry Baryshkov
Use new DRM DSC helpers to setup DSI DSC configuration. The initial_scale_value needs to be adjusted according to the standard, but this is a separate change. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539276/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-4-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/display/dsc: Add drm_dsc_get_bpp_int helperJessica Zhang
Add helper to get the integer value of drm_dsc_config.bits_per_pixel Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539268/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-3-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/display/dsc: add helper to set semi-const parametersDmitry Baryshkov
Add a helper setting config values which are typically constant across operating modes (table E-4 of the standard) and mux_word_size (which is a const according to 3.5.2). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539280/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-2-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/display/dsc: Add flatness and initial scale value calculationsJessica Zhang
Add helpers to calculate det_thresh_flatness and initial_scale_value as these calculations are defined within the DSC spec. Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/539282/ Link: https://lore.kernel.org/r/20230329-rfc-msm-dsc-helper-v14-1-bafc7be95691@quicinc.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2023-06-15drm/msm/dpu/catalog: define DSPP blocks found on sdm845Dmitry Baryshkov
Add definitions of DSPP blocks present on the sdm845 platform. This should enable color-management on sdm845-bassed devices. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542142/ Link: https://lore.kernel.org/r/20230612182534.3345805-2-dmitry.baryshkov@linaro.org
2023-06-15drm/msm/dpu: do not enable color-management if DSPPs are not availableDmitry Baryshkov
We can not support color management without DSPP blocks being provided in the HW catalog. Do not enable color management for CRTCs if num_dspps is 0. Fixes: 4259ff7ae509 ("drm/msm/dpu: add support for pcc color block in dpu driver") Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org> Tested-by: Yongqin Liu <yongqin.liu@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/542141/ Link: https://lore.kernel.org/r/20230612182534.3345805-1-dmitry.baryshkov@linaro.org
2023-06-15drm/msm/adreno: make adreno_is_a690()'s argument constDmitry Baryshkov
Change adreno_is_a690() prototype to accept the const struct adreno_gpu pointer instead of a non-const one. This fixes the following warning: In file included from drivers/gpu/drm/msm/msm_drv.c:33: drivers/gpu/drm/msm/adreno/adreno_gpu.h: In function ‘adreno_is_a660_family’: drivers/gpu/drm/msm/adreno/adreno_gpu.h:303:54: warning: passing argument 1 of ‘adreno_is_a690’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] 303 | return adreno_is_a660(gpu) || adreno_is_a690(gpu) || adreno_is_7c3(gpu); Fixes: 1b90e8f8879c ("drm/msm/adreno: change adreno_is_* functions to accept const argument") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/542138/ Link: https://lore.kernel.org/r/20230612182527.3345786-1-dmitry.baryshkov@linaro.org
2023-06-15fbdev: Use /* */ comment in initializer macroThomas Zimmermann
Use /* */ in initializer macro to avoid out-commenting the comma at the end of the line. Reported-by: Christian König <ckoenig.leichtzumerken@gmail.com> Closes: https://lore.kernel.org/dri-devel/20230530150253.22758-1-tzimmermann@suse.de/T/#m356cda2679c17d7a01f30ce2b5282cd9046ea6d4 Fixes: f1061fa641b8 ("fbdev: Add initializer macros for struct fb_ops") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230614131253.10208-1-tzimmermann@suse.de
2023-06-15Merge drm/drm-next into drm-misc-next-fixesThomas Zimmermann
Backmerging to sync drm-misc-next-fixes with drm-misc-next. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-06-15net: lapbether: only support ethernet devicesEric Dumazet
It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15MAINTAINERS: add reviewers for SMC SocketsJan Karcher
adding three people from Alibaba as reviewers for SMC. They are currently working on improving SMC on other architectures than s390 and help with reviewing patches on top. Thank you D. Wythe, Tony Lu and Wen Gu for your contributions and collaboration and welcome on board as reviewers! Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Jan Karcher <jaka@linux.ibm.com> Acked-by: Tony Lu <tonylu@linux.alibaba.com> Acked-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15s390/ism: Fix trying to free already-freed IRQ by repeated ism_dev_exit()Julian Ruess
This patch prevents the system from crashing when unloading the ISM module. How to reproduce: Attach an ISM device and execute 'rmmod ism'. Error-Log: - Trying to free already-free IRQ 0 - WARNING: CPU: 1 PID: 966 at kernel/irq/manage.c:1890 free_irq+0x140/0x540 After calling ism_dev_exit() for each ISM device in the exit routine, pci_unregister_driver() will execute ism_remove() for each ISM device. Because ism_remove() also calls ism_dev_exit(), free_irq(pci_irq_vector(pdev, 0), ism) is called twice for each ISM device. This results in a crash with the error 'Trying to free already-free IRQ'. In the exit routine, it is enough to call pci_unregister_driver() because it ensures that ism_dev_exit() is called once per ISM device. Cc: <stable@vger.kernel.org> # 6.3+ Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration") Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Julian Ruess <julianr@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-06-15LoongArch: Fix debugfs_create_dir() error checkingImmad Mir
The debugfs_create_dir() returns ERR_PTR in case of an error and the correct way of checking it is using the IS_ERR_OR_NULL inline function rather than the simple null comparision. This patch fixes the issue. Cc: stable@vger.kernel.org Suggested-By: Ivan Orlov <ivan.orlov0322@gmail.com> Signed-off-by: Immad Mir <mirimmad17@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2023-06-15LoongArch: Avoid uninitialized alignment_maskQing Zhang
The hardware monitoring points for instruction fetching and load/store operations need to align 4 bytes and 1/2/4/8 bytes respectively. Reported-by: Colin King <colin.i.king@gmail.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
generated by cgit (git 2.34.1) at 2025-09-18 12:43:07 +0000