summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-03crypto: ccp - Fix DMA operations when IOMMU is enabledGary R Hook
An I/O page fault occurs when the IOMMU is enabled on a system that supports the v5 CCP. DMA operations use a Request ID value that does not match what is expected by the IOMMU, resulting in the I/O page fault. Setting the Request ID value to 0 corrects this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03crypto: chcr - Check device is allocated before useHarsh Jain
Ensure dev is allocated for crypto uld context before using the device for crypto operations. Cc: <stable@vger.kernel.org> Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03crypto: chcr - Fix panic on dma_unmap_sgHarsh Jain
Save DMA mapped sg list addresses to request context buffer. Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-02i40e: add interrupt rate limit verbosityAlan Brady
Due to the resolution of the register controlling interrupt rate limiting, setting certain values for the interrupt rate limit make it appear as though the limiting is not completely accurate. The problem is that the interrupt rate limit is getting rounded down to the nearest multiple of 4. This patch fixes the problem by adding some feedback to the user as to the actual interrupt rate limit being used when it differs from the requested limit. Without this patch setting interrupt rate limits may appear to behave inaccurately. Change-ID: I3093cf3f2d437d35a4c4f4bb5af5ce1b85ab21b7 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: refactor macro INTRL_USEC_TO_REGAlan Brady
This patch refactors the macro INTRL_USEC_TO_REG into a static inline function and fixes a couple subtle bugs caused by the macro. This patch fixes a bug which was caused by passing a bad register value to the firmware. If enabling interrupt rate limiting, a non-zero value for the rate limit must be used. Otherwise the firmware sets the interrupt rate limit to the maximum value. Due to the limited resolution of the register, attempting to set a value of 1, 2, or 3 would be rounded down to 0 and limiting was left enabled, causing unexpected behavior. This patch also fixes a possible bug in which using the macro itself can introduce unintended side-affects because the macro argument is used more than once in the macro definition (e.g. a variable post-increment argument would perform a double increment on the variable). Without this patch, attempting to set interrupt rate limits of 1, 2, or 3 results in unexpected behavior and future use of this macro could cause subtle bugs. Change-Id: I83ac842de0ca9c86761923d6e3a4d7b1b95f2b3f Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: remove unused functionMitch Williams
After refactoring the client open and close code, this is no longer needed. Remove it. Change-ID: If8e6e32baa354d857c2fd8b2f19404f1786011c4 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: Remove FPK HyperV VF device IDJayaprakash Shanmugam
Requirement for VFs to use the VMBus has been removed that's why removing Hyper-V VF device ID. Change-ID: I84f0964f443ee0db3e5e444b5ace996eb71b8280 Signed-off-by: Jayaprakash Shanmugam <jayaprakash.shanmugam@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: Quick refactor to start moving data off stack and into Tx buffer infoAlexander Duyck
This patch does some quick work to pull some of the data off of the stack and hopefully start storing it in the Tx buffer info section of the Tx ring. Ideally we should be moving away from having to store much of anything on the stack and can just maintain it all in the descriptor rings. Change-ID: I4b4715ea1920e122502482b3f9e56a9a6cb1e9fe Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: remove unnecessary __packedTushar Dave
'struct i40e_dma_mem' defined with 'packed' directive causing kernel unaligned errors on sparc. e.g. i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.6.16-k i40e: Copyright (c) 2013 - 2014 Intel Corporation. Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 Kernel unaligned access at TPC[44894c] dma_4v_alloc_coherent+0x1ac/0x300 i40e 0000:03:00.0: fw 5.1.40981 api 1.5 nvm 5.04 0x80002548 0.0.0 This can be fixed with get_unaligned/put_unaligned(). However no reference in driver shows that 'struct i40e_dma_mem' directly shoved into NIC hardware. But instead fields of the struct are being read and used for hardware. Therefore, __packed is unnecessary for 'struct i40e_dma_mem'. In addition, although 'struct i40e_virt_mem' doesn't cause any unaligned access, keeping it packed is unnecessary as well because of aforementioned reason. This change make 'struct i40e_dma_mem' and 'struct i40e_virt_mem' unpacked. Signed-off-by: Tushar Dave <tushar.n.dave@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40evf: remove unused device IDMitch Williams
This device ID was intended for use when running Linux VF drivers under Hyper-V, but we have determined that it is not necessary. Since it is unused, and will never be used, remove it. Change-ID: I74998ab4237db043cd400547bb54a0a5e2a37ea5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: Deprecating unused macroBimmy Pujari
I40E_MAC_X710 was supposed to be for 10G and I40E_MAC_XL710 was supposed to be for 40G. But function i40e_is_mac_710 sets I40E_MAC_XL710 for all device IDS, I40E_MAC_X710 is not used at all. As there is nothing to compare there is no need for this function. Thus deprecating this extra macro and removing this function entirely and replacing it with a direct check. Change-ID: I7d1769954dccd574a290ac04adb836ebd156730e Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: when adding or removing MAC filters, correctly handle VLANsJacob Keller
Instead of using i40e_add_filter or i40e_del_filter directly, when adding a MAC address, we should normally be using i40e_add_mac_filter or i40e_del_mac_filter. These functions correctly handle the various cases of VLAN mode or PVID settings. This ensures consistency and avoids the issues that can occur with the recent addition of a WARN_ON() in i40e_sync_vsi_filters. Change-ID: I7fe62db063391fdd1180b2d6a6a3c5ab4307eeee Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: avoid O(n^2) loop when deleting all filtersJacob Keller
Use __i40e_del_filter instead of using i40e_del_filter() which will avoid doing an additional search to delete a filter we already have the pointer for. Change-ID: Iea5a7e3cafbf8c682ed9d3b6c69cf5ff53f44daf Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: rename i40e_put_mac_in_vlan and i40e_del_mac_all_vlanJacob Keller
These functions purpose is to add a new MAC filter correctly, whether we're using VLANs or not. Their goal is to ensure that all active VLANs get the new MAC filter. Rename them so that their intent is clear. They function correctly regardless of whether we have any active VLANs or only have I40E_VLAN_ANY filters. The new names convey how they function in a more clear manner. Change-ID: Iec1961f968c0223a7132724a74e26a665750b107 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: no need to check is_vsi_in_vlan before calling i40e_del_mac_all_vlanJacob Keller
This function won't be appreciably slower when in VLAN mode, so there is no real reason to not just call it directly. In either case, we still must search the full table for a MAC/VLAN pair. We do get to stop searching a tiny bit early in the case of knowing we are not in VLAN mode, but this is a minor savings and we can avoid the code complexity by not having to worry about the check. Change-ID: I533412195b3a42f51cf629e3675dd5145aea8625 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: fold the i40e_is_vsi_in_vlan check into i40e_put_mac_in_vlanJacob Keller
Fold the check for determining when to call i40e_put_mac_in_vlan directly into the function so that we don't need to decide which function to use ahead of time. This allows us to just call i40e_put_mac_in_vlan directly without having to check ahead of time. Change-ID: Ifff526940748ac14b8418be5df5a149502eed137 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02i40e: don't allow i40e_vsi_(add|kill)_vlan to operate when VID<1Jacob Keller
Now that we have the separate i40e_(add|rm)_vlan_all_mac functions, we should not be using the i40e_vsi_kill_vlan or i40e_vsi_add_vlan functions when PVID is set or when VID is less than 1. This allows us to remove some checks in i40e_vsi_add_vlan and ensures that callers which need to handle VID=0 or VID=-1 don't accidentally invoke the VLAN mode handling used to convert filters when entering VLAN mode. We also update the functions to take u16 instead of s16 as well since they no longer expect to be called with VID=I40E_VLAN_ANY. Change-ID: Ibddf44a8bb840dde8ceef2a4fdb92fd953b05a57 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-02net: add LINUX_MIB_PFMEMALLOCDROP counterEric Dumazet
Debugging issues caused by pfmemalloc is often tedious. Add a new SNMP counter to more easily diagnose these problems. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Josef Bacik <jbacik@fb.com> Acked-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: ipv4: remove fib_lookup.h from devinet.c include listDavid Ahern
nothing in devinet.c relies on fib_lookup.h; remove it from the includes Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: remove useless pfmemalloc settingEric Dumazet
When __alloc_skb() allocates an skb from fast clone cache, setting pfmemalloc on the clone is not needed. Clone will be properly initialized later at skb_clone() time, including pfmemalloc field, as it is included in the headers_start/headers_end section which is fully copied. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: phy: Fix lack of reference count on PHY driverMao Wenan
There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by: Mao Wenan <maowenan@huawei.com> [florian: rebase, rework commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge branch 'MV88E6390-fixes'David S. Miller
Andrew Lunn says: ==================== MV88E6390 fixes Two patches, which have been posted before. Fix simple issues in the mv88e6390 support. These don't need to go to stable, since the mv88e6390 support in stable is insufficient to be usable. To apply cleanly, these patches rely on "net: dsa: mv88e6xxx: Workaround missing PHY". v2: Added Reviewed-by. Removed a redundant "the" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: dsa: mv88e6xxx: Fix typ0 when configuring 2.5GbpsAndrew Lunn
In order to enable 2.5Gbps mode, we need the base speed of 10G, plus the Alt bit setting. Fix a typ0 that used 1Gb base speed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: dsa: mv88e6xxx: Fix ATU age timer for MV88E6390Andrew Lunn
The MV88E6390 family uses a different ATU age timer coefficient. Fix the info structures. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: phy: marvell: Add support for 88e1545 PHYAndrew Lunn
The 88e1545 PHYs are discrete Marvell PHYs, found in a quad package on the zii-devel-b board. Add support for it to the Marvell PHY driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: stmmac: Fix wrong message in stmmac_probe_config_dtHeiner Kallweit
Most likely a copy & paste error in referenced commit. Restore the debug message to what it was before. Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: stmmac: add separate warning for PTP not being supported by HWHeiner Kallweit
Chips like Amlogic S905GXBB are supported by this driver but don't have support for PTP. Add a separate warning for missing HW support to differentiate it from other actual failures. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: stmmac: don't set tx delay in RGMII_ID and RGMII_TXID modeHeiner Kallweit
As documented in Documentation/devicetree/bindings/net/ethernet.txt, in RGMII_ID and RGMII_TXID mode the MAC should not add a tx delay. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02unix: add ioctl to open a unix socket file with O_PATHAndrey Vagin
This ioctl opens a file to which a socket is bound and returns a file descriptor. The caller has to have CAP_NET_ADMIN in the socket network namespace. Currently it is impossible to get a path and a mount point for a socket file. socket_diag reports address, device ID and inode number for unix sockets. An address can contain a relative path or a file may be moved somewhere. And these properties say nothing about a mount namespace and a mount point of a socket file. With the introduced ioctl, we can get a path by reading /proc/self/fd/X and get mnt_id from /proc/self/fdinfo/X. In CRIU we are going to use this ioctl to dump and restore unix socket. Here is an example how it can be used: $ strace -e socket,bind,ioctl ./test /tmp/test_sock socket(AF_UNIX, SOCK_STREAM, 0) = 3 bind(3, {sa_family=AF_UNIX, sun_path="test_sock"}, 11) = 0 ioctl(3, SIOCUNIXFILE, 0) = 4 ^Z $ ss -a | grep test_sock u_str LISTEN 0 1 test_sock 17798 * 0 $ ls -l /proc/760/fd/{3,4} lrwx------ 1 root root 64 Feb 1 09:41 3 -> 'socket:[17798]' l--------- 1 root root 64 Feb 1 09:41 4 -> /tmp/test_sock $ cat /proc/760/fdinfo/4 pos: 0 flags: 012000000 mnt_id: 40 $ cat /proc/self/mountinfo | grep "^40\s" 40 19 0:37 / /tmp rw shared:23 - tmpfs tmpfs rw Signed-off-by: Andrei Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge branch 'mv88e6390-missing-phy-ID'David S. Miller
Andrew Lunn says: ==================== Work around missing PHY prodcut ID in mv88e6390 The internal PHYs of the MV88E6390 have a Marvell OUI, but the product ID is zero. Work around this by trapping reads to the ID, and if it is zero, return the MV88E6390 family ID. v2: Move the workaround into the central mdio read function. Enable the temperature sensor, even though it does not work on the 6390, but it does on the 6341, which has the same ID problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: phy: Marvell: Add mv88e6390 internal PHYAndrew Lunn
The mv88e6390 Ethernet switch has internal PHYs. These PHYs don't have an model ID in the ID2 register. So the MDIO driver in the switch intercepts reads to this register, and returns the switch family ID. Extend the Marvell PHY driver by including this ID, and treat the PHY as a 88E1540. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: dsa: mv88e6xxx: Workaround missing PHY ID on mv88e6390Andrew Lunn
The internal PHYs of the mv88e6390 do not have a model ID. Trap any calls to the ID register, and if it is zero, return the ID for the mv88e6390. The Marvell PHY driver can then bind to this ID. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge branch 'mlx4-queue-reinit'David S. Miller
Martin KaFai Lau says: ==================== mlx4: Misc bug fixes after reinitializing queues This patchset fixes misc bugs after reinitializing queues (e.g. by ethtool -L). v2: * Add another fix to mem leak in tx_ring[t] and tx_cq[t] * In mlx4_en_try_alloc_resources(), move all xdp_prog logic after calling mlx4_en_alloc_resources() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02mlx4: xdp_prog becomes inactive after ethtool '-L' or '-G'Martin KaFai Lau
After calling mlx4_en_try_alloc_resources (e.g. by changing the number of rx-queues with ethtool -L), the existing xdp_prog becomes inactive. The bug is that the xdp_prog ptr has not been carried over from the old rx-queues to the new rx-queues Fixes: 47a38e155037 ("net/mlx4_en: add support for fast rx drop bpf program") Cc: Brenden Blanco <bblanco@plumgrid.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02mlx4: Fix memory leak after mlx4_en_update_priv()Martin KaFai Lau
In mlx4_en_update_priv(), dst->tx_ring[t] and dst->tx_cq[t] are over-written by src->tx_ring[t] and src->tx_cq[t] without first calling kfree. One of the reproducible code paths is by doing 'ethtool -L'. The fix is to do the kfree in mlx4_en_free_resources(). Here is the kmemleak report: unreferenced object 0xffff880841211800 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0a8>] mlx4_en_try_alloc_resources+0x118/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff880841213000 (size 2048): comm "ethtool", pid 3096, jiffies 4294716940 (age 528.353s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81930718>] kmemleak_alloc+0x28/0x50 [<ffffffff8120b213>] kmem_cache_alloc_trace+0x103/0x260 [<ffffffff8170e0cb>] mlx4_en_try_alloc_resources+0x13b/0x1a0 [<ffffffff817065a9>] mlx4_en_set_ringparam+0x169/0x210 [<ffffffff818040c5>] dev_ethtool+0xae5/0x2190 [<ffffffff8181b898>] dev_ioctl+0x168/0x6f0 [<ffffffff817d7a72>] sock_do_ioctl+0x42/0x50 [<ffffffff817d819b>] sock_ioctl+0x21b/0x2d0 [<ffffffff81247a73>] do_vfs_ioctl+0x93/0x6a0 [<ffffffff812480f9>] SyS_ioctl+0x79/0x90 [<ffffffff8193d7ea>] entry_SYSCALL_64_fastpath+0x18/0xad [<ffffffffffffffff>] 0xffffffffffffffff (gdb) list *mlx4_en_try_alloc_resources+0x118 0xffffffff8170e0a8 is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2145). 2140 if (!dst->tx_ring_num[t]) 2141 continue; 2142 2143 dst->tx_ring[t] = kzalloc(sizeof(struct mlx4_en_tx_ring *) * 2144 MAX_TX_RINGS, GFP_KERNEL); 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); (gdb) list *mlx4_en_try_alloc_resources+0x13b 0xffffffff8170e0cb is in mlx4_en_try_alloc_resources (drivers/net/ethernet/mellanox/mlx4/en_netdev.c:2150). 2145 if (!dst->tx_ring[t]) 2146 goto err_free_tx; 2147 2148 dst->tx_cq[t] = kzalloc(sizeof(struct mlx4_en_cq *) * 2149 MAX_TX_RINGS, GFP_KERNEL); 2150 if (!dst->tx_cq[t]) { 2151 kfree(dst->tx_ring[t]); 2152 goto err_free_tx; 2153 } 2154 } Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Cc: Eugenia Emantayev <eugenia@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03Merge branch 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes two amd fixes. * 'drm-fixes-4.10' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctl drm/amdgpu/si: fix crash on headless asics
2017-02-03Merge tag 'topic/vma-fix-for-4.10-2017-02-02' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-fixes here's Maarten's backport of the vma fixes for v4.10. * tag 'topic/vma-fix-for-4.10-2017-02-02' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Track pinned vma in intel_plane_state drm/atomic: Unconditionally call prepare_fb.
2017-02-02xgene_enet: remove bogus forward declarationsArnd Bergmann
The device match tables for both the xgene_enet driver and its phy driver have forward declarations that declare an array without a length, leading to a clang warning when they are not followed by an actual defitinition: drivers/net/ethernet/apm/xgene/../../../phy/mdio-xgene.h:135:34: warning: tentative array definition assumed to have one element drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element The declarations for the mdio driver are even in a header file, so they cause duplicate definitions of the tables for each file that includes them. This removes all four forward declarations and moves the actual definitions up a little, so they are in front of their first user. For the OF match tables, this means having to remove the #ifdef around them, and passing the actual structure into of_match_device(). This has no effect on the generated object code though, as the of_match_device function has an empty stub that does not evaluate its argument, and the symbol gets dropped either way. Fixes: 43b3cf6634a4 ("drivers: net: phy: xgene: Add MDIO driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - two microcode loader fixes - two FPU xstate handling fixes - an MCE timer handling related crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Make timer handling more robust x86/microcode: Do not access the initrd after it has been freed x86/fpu/xstate: Fix xcomp_bv in XSAVES header x86/fpu: Set the xcomp_bv when we fake up a XSAVES area x86/microcode/intel: Drop stashed AP patch pointer optimization
2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Five kernel fixes: - an mmap tracing ABI fix for certain mappings - a use-after-free fix, found via KASAN - three CPU hotplug related x86 PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Make package handling more robust perf/x86/intel/uncore: Clean up hotplug conversion fallout perf/x86/intel/rapl: Make package handling more robust perf/core: Fix PERF_RECORD_MMAP2 prot/flags for anonymous memory perf/core: Fix use-after-free bug
2017-02-02Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two EFI boot fixes, one for arm64 and one for x86 systems with certain firmware versions" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/fdt: Avoid FDT manipulation after ExitBootServices() x86/efi: Always map the first physical page into the EFI pagetables
2017-02-02Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "A fix for a bad opcode in objtool's instruction decoder" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix IRET's opcode
2017-02-02Merge tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd fixes from Bruce Fields: "Three more miscellaneous nfsd bugfixes" * tag 'nfsd-4.10-2' of git://linux-nfs.org/~bfields/linux: svcrpc: fix oops in absence of krb5 module nfsd: special case truncates some more NFSD: Fix a null reference case in find_or_create_lock_stateid()
2017-02-02Merge tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds
Pull Xtensa fix from Max Filippov: "A for an Xtensa build error introduced in reset code refactoring series in v4.9: - fix noMMU build on cores with MMU" * tag 'xtensa-20170202' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix noMMU build on cores with MMU
2017-02-02Merge tag 'pci-v4.10-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "Configure ASPM on the link from a PCI-to-PCIe bridge (avoids a NULL pointer dereference on topologies including these bridges)" * tag 'pci-v4.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Handle PCI-to-PCIe bridges as roots of PCIe hierarchies
2017-02-02ARM: orion5x: fix Makefile for linkstation-lschl.dtbArnd Bergmann
The rename of orion5x-lschl.dts needs to be reflected in the Makefile: make[3]: *** No rule to make target 'arch/arm/boot/dts/orion5x-lschl.dtb', needed by '__build'. Fixes: 6cfd3cd8d836 ("ARM: dts: orion5x-lschl: More consistent naming on linkstation series") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-02-02PCI/MSI: Don't apply affinity if there aren't enough vectors leftChristoph Hellwig
Bart reported a problem wіth an out of bounds access in the low-level IRQ affinity code, which we root caused to the qla2xxx driver assigning all its MSI-X vectors to the pre and post vectors, and not having any left for the actually spread IRQs. Fix this issue by not asking for affinity assignment when there are no vectors to assign left. Fixes: 402723ad5c62 ("PCI/MSI: Provide pci_alloc_irq_vectors_affinity()") Link: https://lkml.kernel.org/r/1485359225.3093.3.camel@sandisk.com Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Tested-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-02drm/radeon: Fix vram_size/visible values in DRM_RADEON_GEM_INFO ioctlMichel Dänzer
vram_size is supposed to be the total amount of VRAM that can be used by userspace, which corresponds to the TTM VRAM manager size (which is normally the full amount of VRAM, but can be just the visible VRAM when DMA can't be used for BO migration for some reason). The above was incorrectly used for vram_visible before, resulting in generally too large values being reported. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-02-02drm/amdgpu/si: fix crash on headless asicsAlex Deucher
Missing check for crtcs present. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193341 https://bugs.freedesktop.org/show_bug.cgi?id=99387 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-15 20:39:14 +0000